Offiejet Pro Wireless (A809)

having trouble connecting my Office Jet Pro 8000 wireless to my Laptop,
Fron the Laptop I have several other shared printer working O.K.
Using Windows 7 Professional I can see the HP printer when I try
to install new printer, the driver downloads O.K, and the printer icon is displayed.
Select "Print Test Page" nothing prints.
Right Click on Icon, click Printer Profile, Windows Error Message
C:\Windows\Explorer.exe
Function address 0x730167BE caused a protection fault,
(exception code 0x0000005).
This must be caused by the HP software as all other printers, if I look at
printer Prifile, lists O.K.
Pleaese Advise
Mike

temporary solution from HP is to use the standard HP Deskjet 990c driver.
it works but i hope they make a proper driver.

Similar Messages

HP Offiejet Pro 8000 A809 prints carbage when using network connection on Windows Server 2008

We are using HP Offiejet Pro 8000 A809 on our network, and they are installed on a Windows 2008 Server.
But when we are sending a print command it prints only garbage. We've tried different print drivers but without success.
Anyone experience the same problem and have a solution?
Thanks

temporary solution from HP is to use the standard HP Deskjet 990c driver.
it works but i hope they make a proper driver.

Hp officejet pro 8000 a809 installed locally on vista business with driver 8.12.2008cant share to xp

My customer has a HP Officejet Pro 8000 A809 installed locally on Vista Business with driver 8.12.2008 He wants to share this for use on the XP PC but after installation on XP and trying to go into printer properties the message comes up "The HP Officejet Pro 8000 A809 Series' printer driver is not installed on this computer. etc etc Do you want to install the driver now? It doesnt matter if you go through the installation process or not, when you try and print a test page you get "Test page failed to print. Would you like to troubleshoot etc"
I have tried installing the XP drivers locally AND on the Vista PC but with no luck. On the shared tab under "additional drivers" there are only Vista drivers listed.
Any advice gratefully received.
Dan

Depending on the model of the unit it may not be wireless. if it says A809n then it is a wireless model, but the A809a model is not. http://h10032.www1.hp.com/ctg/Manual/c01659070.pdf Here is the manual for that unit in case you need it.
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided! If you are not sure how to do this, please see the link below.
I am a Printer Tech for HP.
How do I give Kudos or mark a post as Solved?
I am an HP employee

Paper mismatch error with HP officejet pro 8000 (A809)

officejet pro 8000 A809 wireless -wrong size paper
running OSX 10.7.3 on a macbook pro 2.3GHz Intel i5
this printer has been running fine for a couple/three years now.. no problem when I got the new macbook last summer, or when i upgraded to Lion.
Now it has started getting confused as to what the paper size is - i get this error:
Paper Size Error: The paper size selected in the printer driver software does not match the paper size in the printer IN tray.
but only SOMETIMES. Like right now after screaming at it for an hour, unplugging and rebooting, etc., I sat down to write this and needed to get the exact wording for the error, so i told it to print. And it printed just fine. So I tried the next page I need to print, and I got the error again. I didn't even TOUCH the printer in between. The paper is letter size, it's always letter size. It's in landscape mode, but it has been for the whole morning, while I've been printing out certificates. Now it won't do it anymore. I am at a complete loss. I have rebooted my computer 3 times now, and unplugged the printer countless times. HELP!!!!!
It did this about 3 weeks ago and gave me fits for a couple days, and then magically started working fine again. I've deleted the USB and Bonjour versions of the printer from system prefs and re-added them. More than once. ;-)
Any ideas?

Though a day late & dollar short, I too encountered this issue with Yosemite.
After removing the paper & restarting the printer, I determined the issue to be related to the document. The document I was printing was sent to me from an international corporation. Which I figure was using a non-US paper format or a larger page format for the document.
I tried to change those within the document & was unsuccessful.
I copied the content to a new document & it printed fine.

HP OfficeJet Pro 8000 A809 printing line feed page after every job

I've searched and I have found this is a known issue - that there is supposed to be an update to fix this. I can't find this update anywhere for the HP Officejet Pro 8000 A809. It is connected to the computer via a USB cable. I have tried uninstalling and reinstalling the driver, changing the print heads, doing diagnostics on it, ..., and I still get the line feed page printing after every print job. Help!

Hey there @tjkalb, I hope you are doing well
I read your post about how a "line feed" page prints after each print job from your Officejet 8000, running Windows 7. I have some steps and questions for you to try to get started. Afterwards please get back to me with the results and we will go from there if needed.
1. Does the "line feed" page print after print jobs from all programs, or are you finding it prints when you print from somewhere specifically?
2. Try a Clean Boot on your PC, restart the PC, and try printing from Notepad to see if the line feed prints.
3. Print a Print Quality Page from the printer and examine it for any defects and to see if the line feed page still prints afterwards:
source
4. Click here and try download the "Updates" for this printer: HP Officejet Pro 8000 Printer - A809a
5. Create another User Account profile on your computer and try printing from there to see if the line feed page prints from another profile.
I look forward to hearing from you! If you wish to thank me for my assistance, click the thumbs up icon below
Happy Friday!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

HT4356 My printer is HP Officejet Pro 8000 A809 Series and I don't see it listed. How can I print from iPad?

My printer is HP Officejet Pro 8000 A809 Series and I don't see it listed. How can I print from iPad?

You can use 3rd party software such as Print n Share if you have a PC or Printopia if you have a Mac.
Or you can check HPs site and see what they have available.

HT3500 how can i connect my macbook pro wirelessly to an hp printer with a asus rt 66acr router?

how can i connect my macbook pro wirelessly to an hp printer with a asus rt 66acr router?

Firstly, the HP printer must be connected to the ASUS' network. Then, simply connect your MBP to the network and your printer should be addable in Print & Fax in System Preferences.

HT5287 DVD and CD sharing will not let you play or share DVD movies and audio CD's. Does any one know of a way to get music from a CD on a MacBook Pro wirelessly to an iMac?

DVD and CD sharing will not let you play or share DVD movies and audio CD's. Does any one know of a way to get music from a CD on a MacBook Pro wirelessly to an iMac?

I cannot find the eMac install disk, and I haven't been able to get it to start up from my 10.3 CDRm (holding down option or c), though I read something somewhere about these not being able to start up from system folders earlier than those they shipped with. I've dealt with this sort of thing several times before, and it always seemed to work to simply use target disk mode.
It definitely won't start up fromt the 10.5 DVD-R, and I'm pretty sure I tried putting the MBP into TM to use its optical drive as well, but it didn't work. But it's worth trying again, and I appreciate your input greatly.

I want to connect my ps3 to my macbook pro wirelessly.

I want to connect my ps3 to my macbook pro wirelessly, my macbook pro is connected to the internet via ethernet.

OS X offers a feature known as Internet Sharing. With this feature enabled, the Mac Pro would perform as a "software" router. If the Mac Pro has built-in wireless (AirPort), you could then use this feature to share the Mac Pro's wired Internet connection via AirPort to the PS3.

8500a all in one, and macbook pro wirelessly connected. Broken pipe ????

i have an all in one 8500a and a mac pro wirelessly connected. It has been fine for 7 months. Now I am getting a message that says broken pipe, what do I do? I have no idea what a pipe is.

Hi,
Try resetting the Printing System, then reconfigure the device:
*Be aware that resetting the printer system will remove any existing print queue and reset any customized driver settings.
Click the Apple menu, and then click System Preferences .
Select Print & Fax.
Right-click (or Ctrl + click) your product in the Printers list in the left panel, and then click Reset printing system .
Click OK to confirm the reset.
Type your user Name and Password .
Click OK . The printing system resets.
Now reconfigure the device by following the HP Setup Assistant, located under Applications > Hewlett Packard > Device Utilities.
Now check if the problem been sorted.
If the issue remains with no change, completely remove any installed HP Software by using Scrubber:
**Please be aware that performing the next steps will remove any installed HP Software.
1. Click on Go menu (Click the desktop, then look at the menu in the bar at the top of the page)
2. Select Applications
3. Select the Hewlett-Packard folder
4. Double-click HP Uninstaller application
5. Follow the uninstallation till prompted to select a device to uninstall
6. Press and hold Control + Alt + Cmd keys on the keyboard simultaneously while you click on Uninstall
7. approve any prompt to uninstall any HP Software.
Repair the Mac OS Disc Permissions:
1. Open the the Applications folder.
2. Go to the Utilities folder.
3. Double-click on Disk Utility.
4. Select the hard drive containing the boot volume.
5. Go to the First Aid tab and select Repair Disk Permissions.
Note: This process may take several minutes depending on the Mac and amount of permissions that need to be repaired. The Progress Log will indicate when the proccess has been completed.
Download and install the latest software below:
Mac OS X v10.5 (Leopard) or v10.6 (Snow Leopard):
http://ftp.hp.com/pub/softlib/software11/COL34340/mp-85024-2/OJ_AIO_08_8500_A910_Net_Full_Mac_WW_74....
Mac OS X v10.7 (Lion):
http://ftp.hp.com/pub/softlib/software12/COL40169/bi-97933-2/HP_Lion_Ink_SW_v12-1.13.22.dmg
Finally make sure to install any available HP by clicking the Apple icon and then Software Update.
Please let us know of any further issue,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

First time user trying to set up new Mac pro, wireless mouse and wireless keyboard together?

So I just bought a new Mac Pro, wireless keyboard and mouse. i am a first time Mac user. How do I even get started......connect the wireless mouse and key board to the Mac Pro desktop to even get started??

Just turn on the mouse and keyboard and observe that the green light comes on and starts to blink then turn on the Mac. The Mac should give you on-screen instructions.

Have MacPro wired to Verizon DSL; how do I add MacBook Pro wireless?

I have a MacPro connected with an Ethernet cable to a Westell WireSpeed modem that is plugged into the wall phone jack served by Verizon DSL. The MacPro does not have an Airport card. My wife wants to connect her MacBook Pro with built-in Airport Extreme 802.11n wirelessly to the internet.
I've never used a router before. Would an Airport Extreme Base Station let me operate the MacPro wired and the MacBook Pro wireless simultaneously? If not, how can I do it?
Message was edited by: spotster

Would an Airport Extreme Base Station let me operate the MacPro wired and the MacBook Pro wireless simultaneously?
Yes, the AirPort Extreme or any other vendor's wireless router with a built-in Ethernet switch will provide for both wired and wireless clients simultaneously.

WPA issue on Intel(R) PRO/Wireless LAN 2100 3B

Hi,
I'm trying to use the WPA authentication using my Toshiba's Tecra S1 with an integrated Intel(R) PRO/Wireless LAN 2100 3B. I've read that this adapter supports WPA. I've installed the newest drivers under my Windows xp SP2, but the OS doesn't allows me to select WPA authentication in the wireless properties.
Any help is wellcome.
Thanks in advance.

Hi
The Wlan encryption standard you will find in the WLan properties.
You have to select you SSID and click on the properties.
If there you will not find any option for WPA so this WLan miniPCI card doesnt support this encryption option.
Note: This option depends on the hardware and not on the software. You cannot enable the encryption by updating any drivers or any SP.

Update Intel Pro Wireless driver

I am trying to update my Intel PRO/Wireless through the Intel main site.
I downloaded the driver and while trying to install it there is two exe. files there
*1- dpinst32.exe*
*2- iProDifx.exe*
My question is: Which one to install from the above? And if both which one first pls?
Thank you

Hi!
Is there no setup.exe or install.exe?
But I think you must start the dpinst32.exe file.
You can also install the driver manually. Go to the device manager => right click on the WLAN card => update driver
Bye

Windows 7 Driver for Intel(R) PRO/Wireless 2200BG

Hi,
I've upgraded my MotionComputing LE1600 Tablet from Vista Business to Windows 7. A relatively seemless process and a more efficient OS. However, I need the Intel(R) PRO/Wireless 2200BG driver for my WiFi card or maybe even a generic one? Anyway have a suggestions?
Thanks,
j

I have a DELL Lattitude D830 with the Intel PRO/Wireless 4965AGN. I upgraded from Vista Business 32bit and all of the netwrok connections (wired and wireless) went out. The wireless told me I had an invalid IP configuration and that I could connect locally, but not internet. Looked like a DHCP issue - couldn't get a valid IP configuration, coudn't specify static IP information.
I tried *everything* to get the network to work. Luckily, I stumbled across this post. If you aren't familiar with it (I wasn't), in order to install in Vista Compatibility mode, right-click on the .msi and choose "Troubleshoot Compatibility", then choose Vista from the list of OSs. I DID get the latest drivers, both from Dell and Intel (The one that I installed was from Dell, haven't tried the Intel version which is slightly newer under this process). You may have to get the newest version to get it working - not sure.
Mike

Offiejet Pro Wireless (A809)

Similar Messages

Maybe you are looking for