Offline Asynchronous Delivery Mode - How Concept of "Complete" Works

We have OLM 12 (not sure of sub-version).
We're trying to see if we can store entries for books in OLM.
The OLM manual uses as a book as an example of "Offline Asynchronous" delivery mode.
How is the concept of "credit" or "completion" meant to work?
Right now I can only see:
- Learner cancels their "Enrollment" and doens't get "credit"
- Administrator gives them "Credit" (but this would be virtually impossible to administer)
Anyone know intended functionality for Offline Asynchronous, or otherwise how to accomplish what I'm trying to do?
Thanks!

Hi Lee,
If you use asynchronous off-line (books) the Administrator is the only one who can set a Learner as having "attended" the course (= having read the book).
If you want the Learner himself to make the course attended you could do the following:
Create the Class as an asynchronous on-line class. Give the Class the name of the book and let the online content be a test with one question saying "I have read this book". When the Learner has read the book, he takes the test and will automatically get the status of "attended"
Regards
Anders

Similar Messages

How to find completed work orders

Can any one plz tell where to query work order data?
I need to pull completed work orders in a time period.
and I need to query the items which are generated at my Manufacturing Inventory org upon completion of the
work orders in that time period.
Thanks,
Pradeep

You can query from front end using Discrete >>Discrete Jobs screen. Put completion date range and the select the status button and you can query any required status.
Once you get to the folder you can do an export to look at the data.

AP1231G in WGB mode how does client-vlan work?

I am trying to get an AP1231G in WGB mode to talk to an AP1231G in AP mode. Trunking works to the AP. The WGP associates with AP. I am assuming that workgroup-bridge client-vlan 10 effectively puts the ethernet port on the WGB on to VLAN 10. Do VLANs need to be enabled on the WGB? Does the WGB have to associate with a SID that is on VLAN 10 on the AP. Does this have any effect on the native vlan on the WGB. Has any one got a configuration similar to this that works? I will be happy to post the config files if any one is interested.

Logically speaking, I think yes. VLANs need to be enabled on the WGB too. So that a client with SSID A will be assigned to vlan A and so on. This doesn't have any effect on the native vlan of WGB. But, ensure that the vlans you configure are allowed on the appropriate switch ports along with trunking.

Iphone 4 stuck in "recovery mode" how do i free it up without complete wipe and restore?

iphone 4 stuck in "recovery mode" how do i free it up without complete wipe and restore?

You can try doing a power recycle by pressing on the home button and sleep wake button simultaenously.
This will shut down the device you then may press on the sleep wake button to attempt to restart the device. This may or may not resolve the issue.
Good luck.

Every app install results in the "waiting" mode on my home screen. How can I complete the install process?

Every attempted app installation results in the "waiting" mode icon on my home screen. How can I complete the install process? What am I missing?

Hi,
1) Forget downloading the application from the device, and instead download it through iTunes and sync to transfer the application to your iPhone / iPad.
2) Other way is: Go to Application Settings> Store and tap above the Apple ID to sign out. Restart your iPhone / iPad, go back to Settings> Store and sign. Tap the icon that was waiting to update the application.

How to install webcenter sites 11.1.1.6 or 11.1.1.8 in cluster configuration and delivery mode?

I am trying to install webcenter sites 11.1.1.6 using cluster configuration and in delivery mode but its not getting installed properly.
Can anyone please share on the steps to follow while installing webcenter sites in delivery environment?

The recommendation from the Oracle WebCenter & ADF Architecture Team is to keep the parts decoupled, installing WebCenter Sites on a separate machine. Otherwise it would be leading towards a 'Type 3' integration. Specifically looking at the proof-of-concept application 'Spark', which requires WebCenter Sites and WebCenter Portal installed on the same machine:
+"Due to this co-deployment requirement, most clients have avoided installing or using Spark. And not without reason: installing two big, complex applications on the same environment is problematic with regards to scalability and tuning."+
http://blogs.oracle.com/ATEAM_WEBCENTER/entry/integrating_webcenter_sites_with_webcenter3
The introductory article on integrating WebCenter Sites and WebCenter Portal:
http://blogs.oracle.com/ATEAM_WEBCENTER/entry/integrating_webcenter_sites_with_webcenter
Thanks

How Real Time Apply works while physical standby is open in Read Only mode

Hi,
With Active data guard option, we can open physical standby DB in read only mode, while redo log are being applied. (Real Time Query)
Standby Redo log (SRL) enables Real Time Apply (with "USING CURRENT LOGFILE" clause in recover database command on standby DB)
I am interested to know, how Real Time Query works ?
What is the mechanism with allows us to open physical standby DB in read only mode while redo logs are being applied continuously ?
Regards,
Sujit

Dear user7419391,
That is a new feature in Oracle Database 11g. MRP can use the real time apply in 10g but the concept here is different.
Taken from the following document;
http://www.ascent.co.za/documents/oracle/Oracle%20databse%2011g%20Active-Data-Guard%20datasheet.pdf
*Unique Advantages of Oracle Active Data Guard*
+Active Data Guard is an evolution of Data Guard technology, providing unique+
+performance advantages while leveraging all other enhancements included in Oracle+
+Data Guard 11g. For example, any Data Guard 11g physical standby database can+
+be easily converted to a Snapshot Standby. A Snapshot Standby is open read-write+
+and is ideally suited as a test system, able to process transactions independent of the+
+primary database. A Snapshot Standby maintains protection by continuing to receive+
+data from the production database, archiving it for later use. When tests are+
+complete, a single command discards changes made while open read-write and+
+quickly resynchronizes the standby database with the primary.+
The other link in the previous post is excellent and you really have to read it to understand the active data guard aspects.
Regards.
Ogan

My iPad is disabled, but I know the passcode.. When i connect it to iTunes it says it can't access it because it has a passcode. How can i get rid of the passcode without resetting the iPad? And if there is no way to do so, how do I completely reset it?

My iPad is disabled, but I know the passcode.. When i connect it to iTunes it says it can't access it because it has a passcode. How can i get rid of the passcode without resetting the iPad? And if there is no way to do so, how do I completely reset it?

How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.htmlhttp://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tbhttp://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Devicehttp://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htmhttp://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

Delivery group 001 is not complete

Hi Gurus
I created an order with multiple items having different shipping points and transportation groups.
When I am creating delivery, I am able to do split the delivery and process it manually because of different shipping points and transportation groups.
I created another order with the same items, If I am trying to run delivery in background with TCode VL10G or VL10BATCH, it is not allowing me to do so and it is showing an error:
"Delivery group 001 is not complete
    Message no. VL089
Diagnosis
    Delivery group 001 copied from the sales order on which the delivery is
    based, is not complete. Not all items of the delivery group exist in
    this delivery."
Can anyone provide some info on how to run deliveries background with help of a batch?
Points will be awarded. Please guide me.

Yes. You are absolutely correct. It is about sales BOM.
As this turned into another problem, I started new thread, but I will post the content here as well, coz this is my show stopper. Please help me.
I have sales BOMs.
BOM 1- Header -ABC, with components 1212, & 2323.
BOM 2 - Header DEF, with components 4545, 5656
Transportation group (from Material Master)
Z01 - Restricted
Z02 - Unrestricted
Loading Group (from Material Master)
Z01 - Restricted
Z02 - Unrestricted
I have few BOMs where the transportation group of header item and components BOTH do not differ and ALSO differ to one another.
eg:
ABC Z02         DEF   Z01
1212 Z01        4545   Z01
2323 Z02        5656   Z01
Ship.cond ;            Trans.Grp ;          Route
A1                       Z01                     OVNT
A1                       Z02                     4DAY
Ship.Cond ;        Loading Grp            Plant             Ship.Point
A1                    Z01                        1000              ZS1
A1                    Z02                        1000              ZNS1
I created an order with a Sales BOM that has both restricted and unrestricted transportation group components.
But for the whole BOM (including components), it is pulling up the data of Header item (route & shipping point) and it is not bringing in appropriate info (route & shipping point) of components.
EG: IDEALLY IT SHOULD BE LIKE THIS:
                    ROUTE            SHIP.POINT
10 ABC        4DAY              ZNS1
11 1212       OVNT              ZS1
12 2323       4DAY              ZNS1
BUT IT IS SHOWING UP IN ORDER LIKE BELOW:
                    ROUTE            SHIP.POINT
10 ABC        4DAY              ZNS1
11 1212       4DAY               ZNS1
12 2323       4DAY               ZNS1
Hope I am clear. I want to see the route and shipping point of components as they are determined from route determination and shipping point determination, unlike what I see now.
2) Where I can find the configuration of Delivery group and other than in Item Category? Can you please suggest me the path? I would like to see separate delivery groups if the route and shipping points differ to the items in order for the appropriate delivery split.
Please guide me how to fix this.
Edited by: Vamsi Sai Srinivas on Dec 8, 2008 5:21 AM

While updating iphone, itune gave me error of 1015 which tells that my iphone is much better than from which that i am updating. But now my iphone is still in restoring mode how i can resolve this problem.please tell me

while updating iphone, itune gave me error of 1015 which tells that my iphone is much better than from which that i am updating. But now my iphone is still in restoring mode how i can resolve this problem.please tell me

I just had the same problem with my iphone, only thing i could do was completely restore factory settings, lost a bunch of pics and contacts in the process... hope you have better luck than me

After updating ios my phone in recovery mode how to start

AFTER UPDATING IOS SCREEN APPEARING ONLY CHARGER AND I TUNES PHONE IN RECOVERY MODE HOW TO START

Mine cant finish this proces and restart again.
After updating to 6. ???
The first problem was, even with sufficient power a restart of the iphone.
So I replaced the battery 4 a new one and now this problem.
Reinstalling to fabrics dosnt complete.

How to debug completed Process chain

Hi Experts,
Can you please let me know how to debug completed Process chain.
In my Process Chain, we have one ABAP step to update Z-Table entries.
But it was updated wrong entry into Z-Table.
Now i want to debug ABAP step in Process chain which was completed successfully (This is Monthly load).
I have tried to debug the back ground job but it throws an error message in middle of the debugging.
Could you please tell me how to debug ABAP step in completed Process Chain.
Thanks
Shaik

http://help.sap.com/saphelp_nw04s/helpdata/en/8f/c08b3baaa59649e10000000a11402f/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b0afcd90-0201-0010-b297-9184845346ca
http://help.sap.com/saphelp_nw70/helpdata/en/21/15843b74f7be0fe10000000a114084/frameset.htm
/people/vishvesh.bahirat/blog/2006/11/29/bw-process-chain-design
http://help.sap.com/saphelp_nw70/helpdata/en/21/15843b74f7be0fe10000000a114084/frameset.htm
1.Go to RSPC to view all the chains.
2.There click on any chain which you want to run/view.
3.Click on the log view(shift+F1) to view all the previous runs of the chain and whether they have failed or successful(here you can select 1 day,week ,month etc in the display range)
4.If you want to modify the chain /add a process type /change the variant then click (Ctrl+F9) and do the changes.
Even you can change the start variant in change mode for manual scheduling>right click on start process typeselect display variant--now select start Direct Scheduling/ API or Metachain
under direct scheuling option you can trigger it by setting start immediately /Date-time/After job/event whatever you want to do
Else you can make it part of a Metachain consisting of different such small local process chains.
Now Click on Schedule (F8) to run this chain manually.
5.For Monitoring use Tcodes SM37/RSPCM/SM50
Also you can use BWCCMS.
I usually prefer sm37 to view all the background jobs but SM50 is also useful.
6.debug loop can be used to debug a process chain.(you have to specify here the gap between one event been triggered and the next subsequent process starting)
to capture process in debugger go to SM37(job overview) or to SM50(process overview)
Hope this would help you.

Wat is synchronous, asynchronous & local mode of update in BDC plz help

wat is synchronous, asynchronous & local mode of update in BDC .
plz explain each of them

A Asynchronous updating. In this mode, the called transaction does not wait for any updates it produces to be completed( does not wait till the update in database is complete either it is successful or un successful). It simply passes the updates to the SAP update service. Asynchronous processing therefore usually results in faster execution of your data transfer program.
Asynchronous processing is NOT recommended for processing any larger amount of data. This is because the called transaction receives no completion message from the update module in asynchronous updating. The calling data transfer program, in turn, cannot determine whether a called transaction ended with a successful update of the database or not.
If you use asynchronous updating, then you will need to use the update management facility (Transaction SM12) to check whether updates have been terminated abnormally during session processing. Error analysis and recovery is less convenient than with synchronous updating.
S Synchronous updating. In this mode, the called transaction waits for any updates that it produces to be completed. Execution is slower than with asynchronous updating because called transactions wait for updating to be completed. However, the called transaction is able to return any update error message that occurs to your program. It is much easier for you to analyze and recover from errors.
L Local updating. If you update data locally, the update of the database will not be processed in a separate process, but in the process of the calling program. (See the ABAP keyword documentation on SET UPDATE TASK LOCAL for more information.)
reward if it is helpful..
sai ramesh.

I recently had to get a new computer.It required me going from windows xp to 7 I am trying to put it one the new computer but I get following message Windows installer could not be accessed could be in safe mode.How do I get around it? need it to charge

I recently had to get a new computer.It required me going from windows xp to 7 I am trying to put it one the new computer but I get following message Windows installer could not be accessed could be in safe mode.How do I get around it? need it to charge my ipod on my computer.

I have used PCs for years, and still do at work. But, last year my wife bought me a 15" MBP with the anti-glare screen (I was getting ready to buy for myself). It took me all of 1 week to completely get used to the UI for OS-X, and now I really prefer it over the Win7 UI. I have no experience with Win8. Here are my thoughts:
1) You can get a good computer using either a Win8 machine or a Mac.
2) You will pay less for an equivalent PC. But not as much less as some would have you believe. You need to take into account the all aluminum body of the Mac (vs most PCs being plastic) and the size of the display. And, don't forget that there is a lot of bundled SW on the Mac that you will actually find useful and would have to purchase for the PC.
3) You can probably do everything you need on the PC platform with the right SW (you probably already know this since you are using one already).
That said, I think some things are easier on the Mac. For example, GarageBand is a standard part of the Mac SW installation. I got up and running recording directly from my bass into a track with a song imported from iTunes on another track in a snap. I only had to purchase a Jam adapter ($99) for the bass so I could come in over USB instead of using the audio in port (which did work, by the way). You can do the same on a PC, but you have to purchase the SW from somewhere. And, it probably isn't cheap.
I use VMware Fusion to run those Win programs I already owned because it was much less expensive to buy Fusion than to replace them.
I would not return to a PC for my own use, given a choice. But, I would be very careful about getting my wife a Mac without careful thought as she is not as tolerant of learning new things as I am.
So, there you go.

How can i completely delete message app from my mac?

how can i completely delete the message app from my mac?

As per email.
Hi,
In the Finder (have any window open), Use the Go Menu whilst holding down the ALT key.
This will show the Library in the Menu, select this.
Navigate to the Preferences folder.
Find the com.apple.ids.service.com.apple.madrid.plist file and drag it to the Trash.
This is the one Messages reads directly to create the Receive At list and, if shown, the Start Conversations From drop down.
If Messages was starting properly and you restarted it at the point you would have to re-enter the Apple ID.
On the iPhone.
Go to Settings > Messages and check the app is ON first.
Then check the Send and Receive Section.
This will always list the iPhone Number as ticked and Greyed out (You can’t edit it).
Having said that I have twice found the Number to be Unchecked (whilst still grey out).
If this is the case go to the Apple ID section and Remove the Apple ID.
This will also remove it from the Send and Receive section (you can’t do it the other way round.)
Once that is done, place the iPhone in Airplane mode to break with the Servers.
After a few minutes take it out of Airplane Mode and return to Setting > Messages
You should see the iPhone Number being Verified. Wait until this is done.
(I would normally suggest sending an iMessage to the Apple ID at this point as it would be the only Active ID on the Mac. And sending a reply)
You can now add the Apple ID back to the iPhone if you wish to use that as well, if you intend to use it.
If not then you way want this site https://selfsolve.apple.com/deregister-imessage
Please stick to one method of asking me (The thread will do for now.)
I am here 3 hours every evening.
I read all the new post regarding email alerts from the boards.
I then filter the Yosemite, Mavericks and iChat Areas using the Contents page and where require Messages or iMessages and deal with unread one.
Posting here at 2.41PM (according to the Time view I have) and then emailing me 11 minutes later seems like you are giving me the hurry up.
In the email and this Post you are not clear if you want Messages to work again.
Removing the com.apple.ichat.plist may help with that. (The Status Message one will not)
You may find checking the Font Book and the AppleGothic Font is the answer.
8:56 pm Friday; January 23, 2015
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Offline Asynchronous Delivery Mode - How Concept of "Complete" Works

Similar Messages

Maybe you are looking for