Offline Bouncing with external effects

Hi
I know that I have to print all external midi instruments to audio before offline bouncing. But what about external effects?
Say I have a I/O plugin on my master bus routed to an external compressor, do I have to print the compressor or will it be included in the offline bounce?
Also, if I do a realtime bounce will it include the compressor?

Ok, so as I thought offline bounce will not include the external effects, but what about realtime? Does it include the external effects?

Similar Messages

Strange new problem with external effects and latency compensation

i'm currently facing a new , very strange problem with latency compensation for external effect devices. it alway worked fine for me but suddenly there are strange things going on. i'm suddenly running into problems when using sends which feed auxes going to external effect devices.
latency compensation is set to ALL !!!
easy setup :
- open an empty project and create 2 audioinstrument tracks. on the first one load the exs with a drumkit and record f.e. a bassdrum pattern. leave the 2. instrument empty.
- now on the first audio instrument create a send to bus 1 -> aux 1 and insert the i/o plug-in in the aux and route it to your external effect device. chose a temposynced delay.
- press play = everything is fine when audioinstrument 1 is highlighted in the arrange.
- press stop, click on the track with the 2. audioinstrument and press play = totaly weird timing problems. delay is only in sync when track 1 is highlighted.
- create a send in the 2. audioinstrument and route it to bus 1 -> aux 1 too = still the same problem
now insert ANY softwareinstrument in audioobject 2 and suddenly the timing for the delay is right.
go ahead and create a 3. audioinstrument track but leave it empty first. chose it in the arrange = again weird timing problems with the external delay.
insert any software instrument on audioinstrument 3 = still the same problem
now create the send to bus 1 -> aux 1 in audioinstrument 3 and guess what, timing is right.
*** is going on here ? can anyone reproduce that ?
it works fine when using sends which feed auxes with software effects inserted.
funny thing is, when i go to the environment and change aux object one to bus object 1 and insert the same i/o in it it works !!!
very very strange, please tell me i'm not crasy and this is a bug !!!
as said, latency compensation is set to all.
i'm using the mac pro 3.2 8-core running os 10.5.4, logic 8.0.2 and a motu pci-e audio system.
Message was edited by: Olaf Dieckmann

Welcome to the Discussions.
If you need it formatted FAT32, reformat it on your Mac. Use MS-DOS (FAT32) as the file system. If you don't need it for both PC and Mac, format it HFS+ and you'll be able to use the Retrospect Express software that came with it on your Mac.
John

Using External Effects with Logic

I'm about to purchase Logic 9, and also need an Audio Interface.
I've got a Korg MicroKorg, which I intend to line-in for its own synth functionality. I also intend to use it as a midi control surface to use percussion, etc., in Logic. How would this work with external effects?
If I create a drum track in Logic, I'd like to do things like run that track through pedals like an EHX Flanger Hoax (I realize sound quality may vary, given that this is a guitar effect).
How what I do that, and what would I need to look for in an Audio Interface to allow me to get the audio out of Logic, through the pedal, and back into Logic?
Thx.

I think I understand you - you have a choice of Firewire or USB connected devices - Firewire devices are faster and generally more reliable and can handle a larger bandwidth, so if you're planning on recording numerous inputs, for example, this will matter. However, USB devices are pretty good on the whole - I'm using a simple Apogee One at the moment, which is perfectly adequate for my purposes, but my earlier point was that it obviously wouldn't be any good for using external effects since you're going to need to send a signal out from Logic (maybe via a Bus/Auxiliary) to your effects device and then return it back into Logic, so you need an interface with enough inputs and outputs to be able to do that. You might want to have other outboard gear permanently connected for convenience, so only you can work out how many inputs and outputs you'll need and obviously, the bigger the requirement, the more expensive it will be. You'll have to do some Googling to give you an idea - Apogee, Focusrite and MOTU are good starting points, in my opinion but there's a vast range (I'd avoid MAudio)
http://www.google.co.uk/#hl=en&gs_nf=1&cp=22&gs_id=2g&xhr=t&q=audio+interfaces+f or+mac&pf=p&sclient=psy-ab&oq=audio+intefaces+for+ma&gs_l=&pbx=1&bav=on.2,or.r_g c.r_pw.r_qf.,cf.osb&fp=426f61de939593dc&biw=1231&bih=579
Another point I was trying to make earlier is that Logic includes such a large range of effects to choose from (the Pedalboard is an emulation of various fx pedals which you can swop around) that you may find you can get the kind of sounds you want 'in the box' - so that's well worth a try first.

Bounce with effects

Hi Forum
i've a 6 part vocal line and one each track via bus a reverb.
When i do bounce in place i get a dry track without.
What is the banal basic procedure for bouncing with effects.
addendum : I dont want a full bounce I want the 6 traks separat but bounced...
Yours
B

Dear Erik
Thanks,
I've done that now...
Is this a stupid way to do work or is this simply not a normal way to use audio material...
i thought it should be quite straight forward
But thanks ;.)
yours
B

Fades don't work with offline bounce

I have the agogee 64 symphony and when I offline bounce a mix none of my fades work,...
any suggestions?
Thanks,
Paul

Hey Vladimir86,
This may be a question that MOTU could answer. It says on their website their devices are compatible with GarageBand. Here is link to their support page:
http://www.motu.com/techsupport
Here is also a link to the mac setup guide:
http://cdn-data.motu.com/manuals/firewire-usb-audio/Audio_Express_User_Guide_Mac .pdf
Hope this helps

Issues with External Hard Drives

I hope this is the right forum for this one - please give me a steer if not! I've also posted it in 'Dock and Finder', but this forum seems equally appropriate, if not more so.
I'm getting repeated issues with External Hard Drives, including ones that I have been using successfully for months/years, suddenly failing to mount and then becoming 'unknown device' through the firewire branch of 'About This Mac'.
I've just bought a new hard drive on the grounds that the others had somehow failed, and the same problems are emerging. I decided to Repair Permissions on my iMac's internal drive, and am copying the results below, from repair runs conducted yesterday and today:
YESTERDAY'S REPAIR PERMISSIONS RESULTS
Verifying volume “Macintosh HD”
Performing live verification.
Checking Journaled HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Checking multi-linked files.
Checking Catalog hierarchy.
Checking Extended Attributes file.
Checking volume bitmap.
Checking volume information.
The volume Macintosh HD appears to be OK.
Repairing permissions for “Macintosh HD”
Reading permissions database.
Reading the permissions database can take several minutes.
Permissions differ on "private/var/log/secure.log", should be -rw------- , they are -rw-r----- .
Permissions differ on "Library/Preferences", should be drwxrwxr-x , they are drwxrwxrwx .
Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/lanArrow.png", should be -rwxrwxr-x , they are -rw-rw-r-- .
Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/lanCheck.png", should be -rwxrwxr-x , they are -rw-rw-r-- .
Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/lanDisabled.png", should be -rwxrwxr-x , they are -rw-rw-r-- .
Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/wanArrow.png", should be -rwxrwxr-x , they are -rw-rw-r-- .
Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/wanCheck.png", should be -rwxrwxr-x , they are -rw-rw-r-- .
Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/wanDisabled.png", should be -rwxrwxr-x , they are -rw-rw-r-- .
Permissions differ on "Library/Application Support/Apple/ParentalControls/ALRHelperJobs", should be drwxrwxr-x , they are drwxr-xr-x .
ACL found but not expected on "System/Library/User Template/English.lproj/Sites".
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/DVD.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/FRSettings.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/FRSources.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Movies.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Music.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Photos.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Podcasts.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/TV.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PrivateFrameworks/BackRow.framework/Versions/A/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
ACL found but not expected on "System/Library/User Template/English.lproj/Desktop".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Application Support".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Assistants".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/MIDI Drivers".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Plug-Ins/Components".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Plug-Ins/Digidesign".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Plug-Ins/VST".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Plug-Ins".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Sounds/Alerts".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Sounds/Banks".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Sounds".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/ColorPickers".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Compositions".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Favorites".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/FontCollections".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Fonts".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/iMovie/Plug-ins".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/iMovie/Sound Effects".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/iMovie".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Input Methods".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Internet Plug-Ins".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Keyboard Layouts".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Preferences".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Printers".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Screen Savers".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Sounds".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Voices".
ACL found but not expected on "System/Library/User Template/English.lproj/Library".
ACL found but not expected on "System/Library/User Template/English.lproj/Movies".
ACL found but not expected on "System/Library/User Template/English.lproj/Music".
ACL found but not expected on "System/Library/User Template/English.lproj/Pictures".
ACL found but not expected on "System/Library/User Template/English.lproj/Public".
Permissions differ on "Applications/iTunes.app/Contents/CodeResources", should be -rw-rw-r-- , they are lrwxr-xr-x .
Permissions differ on "Applications/iTunes.app/Contents/Frameworks/InternetUtilities.bundle/Contents/ CodeResources", should be -rw-rw-r-- , they are lrwxr-xr-x .
Permissions differ on "Applications/iTunes.app/Contents/Resources/iTunesHelper.app/Contents/CodeResou rces", should be -rw-rw-r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/LaunchDaemons/com.apple.usbmuxd.plist", should be -rw-r--r-- , they are -rwxr-xr-x .
Warning: SUID file "System/Library/Filesystems/AppleShare/afpLoad" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/DiskManagement.framework/Versions/A/Resources /DiskManagementTool" has been modified and will not be repaired.
Warning: SUID file "sbin/umount" has been modified and will not be repaired.
Warning: SUID file "bin/rcp" has been modified and will not be repaired.
Permissions differ on "Library/Application Support/Apple/ParentalControls/ContentFiltering", should be drwxrwxr-x , they are drwxr-xr-x .
Permissions differ on "Library/Application Support/Apple/ParentalControls", should be drwxrwxr-x , they are drwxr-xr-x .
Permissions differ on "System/Library/PrivateFrameworks/iLifeMediaBrowser.framework/Versions/A/CodeRe sources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/CodeResourc es", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/BlackAndWhiteEffect.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/CubeTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/DissolveTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/DropletTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/FadeThroughBlackTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/FlipTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/MosaicFlipTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/MosaicFlipTransitionSmall.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/PageFlipTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/PushTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/RevealTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/SepiaEffect.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/TwirlTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/WipeTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Warning: SUID file "usr/bin/quota" has been modified and will not be repaired.
Warning: SUID file "usr/bin/rlogin" has been modified and will not be repaired.
Warning: SUID file "usr/bin/rsh" has been modified and will not be repaired.
Permissions repair complete
TODAY'S PERMISSIONS REPAIR RESULTS
Repairing permissions for “Macintosh HD”
Reading permissions database.
Reading the permissions database can take several minutes.
Permissions differ on "Library/Application Support/Apple/ParentalControls/ALRHelperJobs", should be drwxrwxr-x , they are drwxr-xr-x .
ACL found but not expected on "System/Library/User Template/English.lproj/Sites".
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/DVD.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/FRSettings.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/FRSources.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Movies.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Music.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Photos.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Podcasts.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/TV.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/PrivateFrameworks/BackRow.framework/Versions/A/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
ACL found but not expected on "System/Library/User Template/English.lproj/Desktop".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Application Support".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Assistants".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/MIDI Drivers".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Plug-Ins/Components".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Plug-Ins/Digidesign".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Plug-Ins/VST".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Plug-Ins".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Sounds/Alerts".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Sounds/Banks".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Sounds".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/ColorPickers".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Compositions".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Favorites".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/FontCollections".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Fonts".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/iMovie/Plug-ins".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/iMovie/Sound Effects".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/iMovie".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Input Methods".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Internet Plug-Ins".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Keyboard Layouts".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Preferences".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Printers".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Screen Savers".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Sounds".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Voices".
ACL found but not expected on "System/Library/User Template/English.lproj/Library".
ACL found but not expected on "System/Library/User Template/English.lproj/Movies".
ACL found but not expected on "System/Library/User Template/English.lproj/Music".
ACL found but not expected on "System/Library/User Template/English.lproj/Pictures".
ACL found but not expected on "System/Library/User Template/English.lproj/Public".
Permissions differ on "Applications/iTunes.app/Contents/CodeResources", should be -rw-rw-r-- , they are lrw-rw-r-- .
Permissions differ on "Applications/iTunes.app/Contents/Frameworks/InternetUtilities.bundle/Contents/ CodeResources", should be -rw-rw-r-- , they are lrw-rw-r-- .
Permissions differ on "Applications/iTunes.app/Contents/Resources/iTunesHelper.app/Contents/CodeResou rces", should be -rw-rw-r-- , they are lrw-rw-r-- .
Warning: SUID file "System/Library/Filesystems/AppleShare/afpLoad" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/DiskManagement.framework/Versions/A/Resources /DiskManagementTool" has been modified and will not be repaired.
Warning: SUID file "sbin/umount" has been modified and will not be repaired.
Warning: SUID file "bin/rcp" has been modified and will not be repaired.
Permissions differ on "Library/Application Support/Apple/ParentalControls/ContentFiltering", should be drwxrwxr-x , they are drwxr-xr-x .
Permissions differ on "Library/Application Support/Apple/ParentalControls", should be drwxrwxr-x , they are drwxr-xr-x .
Permissions differ on "System/Library/PrivateFrameworks/iLifeMediaBrowser.framework/Versions/A/CodeRe sources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/CodeResourc es", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/BlackAndWhiteEffect.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/CubeTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/DissolveTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/DropletTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/FadeThroughBlackTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/FlipTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/MosaicFlipTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/MosaicFlipTransitionSmall.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/PageFlipTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/PushTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/RevealTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/SepiaEffect.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/TwirlTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/WipeTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Warning: SUID file "usr/bin/quota" has been modified and will not be repaired.
Warning: SUID file "usr/bin/rlogin" has been modified and will not be repaired.
Warning: SUID file "usr/bin/rsh" has been modified and will not be repaired.
Permissions repair complete
My concerns are:
* Some of the permissions repaired yesterday appear to have needed to be repaired again today
* There are several files which carry a warning that they won't be repaired as they have been 'modified', and some of these clearly relate to disk management.
Does anyone have any ideas what is going on???
Thanks!!

Many problems with the 10.5.7 update have been fixed by a Restart.
If that doesn't help, something may have gone wrong with the update. Download and install the "combo" update, from: http://support.apple.com/downloads/MacOS_X_10_5_7_ComboUpdate
If that doesn't help, try running the Apple Hardware Test, on the disc that came with your computer.
1. Disconnect all external devices (including the Ethernet cable) except the keyboard and mouse.
2. Insert the "Additional Software & Apple Hardware Test" disc that came with your computer.
3. Restart while holding down the "C" key. When the list of available startup volumes appears, click Apple Hardware Test and the right arrow.
4. When the Apple Hardware Test main screen comes up (after a moment), follow the on screen instructions.
5. If it detects a problem, an error code will be displayed. Make a note of it.

Update to 10.6.8 colour problems with external display

I have a mid-2010 13" macbook pro. I use a mini DVI to HDMI adaptor to connect to my Philips LCD TV. It has always worked perfectly including audio. Since update to 10.6.8 (yesterday) there is a colour-cast on the external display that makes it unusable. I have tried a hard reset of the mac with no effect except that the colour cast changed from green to red (strange!).
Anyone had a similar problem or have any ideas how I could solve it? (no time machine so I can't downgrade unfortunately)

Though I am using and iMac 27 and not a macbook, I have the similar issues since the 10.6.8 update.
I too am using the adapter to connect to a Philips 42' LCD.
You can see my post here: (has a pic of what my TV image now looks like since update.)
https://discussions.apple.com/message/15488605#15488605
I ended up going back to 10.6.7, not a fix, but no other alternative..
I used to have this problem a year ago on a PC that happened to have the same ATi Graphics card. I just used the ATI control center and changed a setting to YBR component or something like that in some color settings. But unfortunately we don't have the ATI control panel for mac, least I don't think we have any kind of alternative, but would prolly fix it..

Issue with external WSDL in own Outbound interface using SOAP UI

Hello,
this is the issue:
a) Imported an external WSDL to PI as external definition
b) Added external definition to a sync. Service interface
c) Completed configuration and created a WSDL from the sender agreement in Directory (this is PI 7.1)
d) imported the WSDL from c) to soap UI which we are using for testing interfaces
    (already successful with other sync interface where the WSDL from c) contains a message type created in PI
e) testing this interface results in an error:
Error message in MONI:
SAP:Error SOAP:mustUnderstand="1" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code>
<SAP:P1>com/sap/xi/tf/_MM_TestTrigger_Testm~</SAP:P1>
<SAP:P2>com.sap.aii.mappingtool.tf7.IllegalInstanceExcepti</SAP:P2>
<SAP:P3>on: Cannot create target element /ns0:props. Value</SAP:P3>
<SAP:P4>s missing in queue context. Target XSD requires a~</SAP:P4>
<SAP:AdditionalText />
<SAP:Stack>Runtime exception occurred during application mapping com/sap/xi/tf/_MM_Test_Testm; com.sap.aii.mappingtool.tf7.IllegalInstanceException: Cannot create target element /ns0:props. Values missing in queue context. Target XSD requires a</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
This is the message as it looks like in soapUI:
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:com="http://jusit.hp.com/sys/common/">
   <soapenv:Header/>
   <soapenv:Body>
      <props>
         <com:Property>
            <com:PropertyName>A</com:PropertyName>
            <com:PropertyValue>1</com:PropertyValue>
         </com:Property>
      </props>
   </soapenv:Body>
</soapenv:Envelope>
This is the payload in MONI as it comes from SOAP UI (using http connection):
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
<props xmlns:com='http://jusit.hp.com/sys/common/' xmlns:soapenv='http://schemas.xmlsoap.org/soap/envelope/'>
         <com:Property>
            <com:PropertyName>A</com:PropertyName>
            <com:PropertyValue>1</com:PropertyValue>
         </com:Property>
      </props>
This is the payload as it looks like in Mapping Test in Enterprise Repos. from implemented ext.def.:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:props xmlns:ns0="http://jusit.hp.com/sys/common/">
   <ns0:Property>
      <ns0:PropertyName>A</ns0:PropertyName>
      <ns0:PropertyValue>1</ns0:PropertyValue>
   </ns0:Property>
</ns0:props>
Is there any restriction with external definitions to be used in PI which could be the reason for this strange behaviour?
The implementation contained a message type created in PI earlier which was running successful!
The problem came up with the external definition!
Thank you for your help!
Best regards
Dirk

Hi,
the problem is not the mapping as it is 1:1 with the same message on both sides.
But when I replace the "com"s with "ns0" and "props" with "ns0:props" in the request in soap UI
the payload will be accepted and mapping is successful!
So the issue is about the modification soap UI is doing on the imported WSDL.
a) Generated request in soap UI from imported WSDL: FAILS in PI!!!!
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:com="http://test.ap.com/sys/common/">
   <soapenv:Header/>
   <soapenv:Body>
      <props>
         <com:Property>
            <!You may enter the following 2 items in any order>
            <com:PropertyName>?</com:PropertyName>
            <com:PropertyValue>?</com:PropertyValue>
         </com:Property>
      </props>
   </soapenv:Body>
</soapenv:Envelope>
b) Modified request in soap UI from imported WSDL: WILL BE PROCESSED IN PI
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ns0="http://test.ap.com/sys/common/">
   <soapenv:Header/>
   <soapenv:Body>
      <ns0:props>
         <ns0:Property>
            <!You may enter the following 2 items in any order>
            <ns0:PropertyName>B</ns0:PropertyName>
            <ns0:PropertyValue>5</ns0:PropertyValue>
         </ns0:Property>
      </ns0:props>
   </soapenv:Body>
</soapenv:Envelope>
But is there any possibility to avoid this effect in soap UI?
Regards
Dirk

JavaFX with external libraries

Hi,
I would like to get some help about compiling a JavaFX code with external libraries. I've searched around a lot, but cant find the solution.
Basically I have a JavaFX application, that uses images (they are under the src/ folder as they suggest it) and uses external .jar files, AND these jar files uses other external files (not jars). I want to run the application in desktop mode first, so now I am interested in a solution that makes it work on PC.
I am using Netbeans to develop and run (works everything fine when running from IDE), and using javafxpackager to compile, when I want to run without the IDE.
When I compile with Netbeans, the generated jar and jnlp files can run ONLY from the dist/ folder, if I copy it somewhere else in my winchester, it does not start.
I have find something about "signing jars", so I have to make the jars signed to be able to run them AND to be able to link to the image files that the application uses.
So I have 2 problems/questions with this situation:
- I have to use external jars and those jars uses external files, but when I start the app, it seems its __DIR__ variable is not set correctly, but I've read that I have to make the application "signed" to solve this problem, but
- if I make the JavaFX signed, it requires that all other jars have to be signed? (it sounds logical of course)
So, my final question is, do I have to make the application (and all other jars) signed, to be able to use external jars and files or not (if I want to run as a desktop application)?
And if I have to make them signed, then will the relative linking work correctly?
So whats the best way to make it work (using external files and jars)?
Thanks for any help, and sorry for the long post (and for my bad english) :)
Cheers
kojak

kojak wrote:
When I compile with Netbeans, the generated jar and jnlp files can run ONLY from the dist/ folder, if I copy it somewhere else in my winchester, it does not start.Unfortunately JNLP requires the base location to be stored in the JNLP file. While that supposedly makes JNLP distributed stuff more secured, it also make them cumbersome and time-consuming to use.
Futhermore, JNLP files generated by NetBeans reference a local web server that only runs when NetBeans is on.
That explains why you just simply cannot move the app to the location you want. I you move them, you have to open them (any text editor) and modify the codebase field (possibly the homepage's href too).
If you want to use only 1 single JNLP, all your JARs references in that JNLP need to be signed with the very same certificate (certificate A).
Unfortunately, this is not good most of the time as some external lib (generally the ones coming from Sun/Oracle) are already signed and you cannot resign them.
The other option is that you can make your main JNLP reference other sub-JNLP that are placed at the same location. Each of these sub-JNLP can reference 1 or more JARs that are signed with a different certificate (1st JNLP used certificate B, 2nd JNLP used certificate C, etc.).
An example adapted from my own main JNLP:
<resources>
    <java version="1.6+"/>
    <jar href="http://<intranet web server>/<my main JAR file>" download="eager" main="true"/>
    <extension href="http://dl.javafx.com/1.3/javafx-rt.jnlp" name="JavaFX 1.3.x Runtime"/>
    <extension href="http://<intranet web server>/l2fprod-7.3.jnlp" name="l2fprod-7.3"/>
    <extension href="http://<intranet web server>/JFXtras-0.7.jnlp" name="JFXtras-0.7"/>
    ...and JFXtras-0.7.jnlp:
<?xml version="1.0" encoding="UTF-8"?>
<jnlp spec="1.0+" codebase="http://<intranet web server>" href="JFXtras-0.7.jnlp">
    <information>
        <title>JFXtras-0.7</title>
        <vendor>JFXtras</vendor>
        <homepage href="http://code.google.com/p/jfxtras/"/>
        <description>Additionnal controls for JavaFX</description>
        <offline-allowed/>
    </information>
    <security>
       <all-permissions/>
    </security>
    <resources>
       <jar href="lib/JFXtras-Common-0.7rc2.1.jar" main="false" download="eager" size="1309380"/>
       <jar href="lib/JFXtras-Controls-0.7rc2.jar" main="false" download="eager" size="1453233"/>
       <extension name="MigLayout-3.7" href="MigLayout-3.7.jnlp"/>
       <extension name="SwingWorker-1.2" href="SwingWorker-1.2.jnlp"/>
    </resources>
    <component-desc/>
</jnlp>Both JARs files in that particular JNLP can be signed with a different certificate from the one of the main jar, same wit the JARs listed in the 2 sub-JNLPs that are referenced here.
Note: of course, currently, JARs provided by JFXtras are note signed, so I end having to sign them myself anyway, but you get the idea.
Unfortunately NetBeans does not generate such setup so you'll have to find a tool or develop something that does that for you.
Perhaps you should try to post your question in the web start forum Java Web Start & JNLP as well but be prepared to face the all knowledgeable and always helpful but not very user-friendly and definitely not patient with new comers Andrew Thompson.
Note that I've never used external files so I do not know if signing the JAR would fix that particular issue (I do not think so).
Overall I do not like Java Web Start, as said before, it's cumbersome, time-consuming to use, poorly documented, with basically very little to no packaging/helper tool, prone to failure if you make the slightest mistake in the JNLP(s) definition (having a nebulous documentation of its feature does not help) and they've introduced a stream of bugs and errors with each sub-release of Java 6 for the past year and the half that makes programmer's life a hell and JWS a joke compared to other deployment technologies used by competitors.

Diagnosing an ASM space issue for a primary and a standby database instance with external redundancy.

I've received an alert from Enterprise manager saying "Disk Group DATA_SID requires rebalance because at least one disk
is low on space". My colleague who I would go to with this question is unavailable, so this is a learning opportunity
for me. So far google and Oracle documentation have provided lots of information, but nothing that answers my questions.
I've run the following query on both the primary and standby databases ASM instances:
select name, disk_number, sector_size,os_mb, total_mb, free_mb, redundancy from v$asm_disk;
On the primary I get 4810M Free space and 18431M Total Space
on the standby I get 1248M Free space and 18431M Total Space -- this is the one that complained via OEM
When I run the following query in the database instance:
select sum(bytes)/1024/1024 MB from dba_segments;
I get 3736.75M as a result.
My questions are:
1. Will OEM's suggestion to rebalance the disk actually help in this situation since the instance is set up with external redundancy?
2. If I've got 18G of space and only 3.7G of data, why is OEM complaining?
3. How can I reclaim what I presume is allocated but unused space in my problem disk group?
4. How can I determine what extra data the standby has that the primary doesn't since both have the same total space allocation, but different amounts of free space?

Thank you for the reply. That link is very good.
We are an 11.1 version of our database. Linus is OEL 5.6.
So, looking at the portion of the link that refers to 'Add Standby database and Instances to the OCR' - If we use SRVCTL to give the STANDBY the role of ‘physical_standby’ and the start option of ‘mount’, what effect will that have if the STANDBY becomes our PRIMARY?
Would these database settings need to be modified manually with SRVCTL each time?
We understand why the instance is not starting when the node is rebooted, we are looking for a best practice of how this is implemented.
Thank you.

Do somebody knows what´s the recommended heigh to install an access point 1242 with external antennas 1728 on a flat area?

Do somebody knows what´s the recommended heigh to install an access point 1242 with external antennas 1728 on a flat area?And for example, if i use aps 3602 the heigh to install is the same?? BEST REGARDS

To determine the required height of an antenna tower over a hypothetically flat, spherical Earth, it's necessary to calculate the effect of the Earth's curvature, and then add a distance equal to 60% of the radius of the First Fresnel Zone. The table below shows the result of these calculations. Values have been rounded up to the nearest foot.
Line of Sight Distance Between Antenna Towers
Height of Tower to Avoid Flat Earth Curvature
Tower Height Required Over Tallest Obstacle In Line-of-Sight to Provide
60% Fresnel Zone Clearance
2.4GHz 802.11b/g
5.8 GHz 802.11a
8 Miles
10 feet
33
25
10 Miles
15 feet
38
30
12 Miles
20 feet
43
35
14 Miles
25 feet
48
40
16 Miles
30 feet
53
45
18 Miles
40 feet
63
55
20 Miles
50 feet
73
65
22 Miles
60 feet
83
75
24 Miles
70 feet
93
85
26 Miles
80 feet
103
95
28 Miles
100 feet
123
115
32 Miles
125 feet
148
140
34 Miles
150 feet
173
165
40 Miles
200 feet
223
215
It can be seen in the table above that a wireless link between two points separated by 26 miles would require an antenna tower with a minimum height of 103 feet for an 802.11b/g radio and 95 feet for an 802.11a radio. In practice the heights would typically be 20 feet higher, or more. This is because the Earth is not smooth and flat and the tower height must be raised to compensate for buildings, trees, hills, or other obstacles. For example, in a suburban setting, with houses and small offices, it may be necessary to add 20 to 40 feet to the tower height to get over the homes, offices, and trees that would be in the line-of-sight between the two towers.

I'm unable to offline bounce after switching from Logic 8 to Logic X.

What happens is once I have all the bounce settings how I want them, I hit 'Bounce' and then the progress bar pops up but doesn't move at all, then I get about 8 seconds of pinwheel before it just stops and the window goes away. No file on the Desktop.
I've tried changing my settings and destination and all that. I've tried the 'Share to iTunes' way and the 'Bounce Selection' way using cycle mode to highlight what I want to export. Realtime bounce works, but I have songs that can't be played from start to finish without overloading.
I've read that apparently third party plugins can cause this but I only use one third party plugin (Pianoteq) and I've opened a new project, recorded using the plugin, and done a successful offline bounce.
In this project I opened a few of my old presets (both audio and midi) and tried to bounce while using various presets. Sometimes it worked and sometimes it didn't. I couldn't narrow it down to a particular plugin.
I used Logic 8 for over five years and am opening up projects that I began in 8. Could there be plugins that aren't compatible with X's offline bounce? I never had this problem in Logic 8.

I have the same issue. Also, it appeared in the most recent project, but not in the two most recent ones. Those projects are still able to bounce without issues. Also, this only applies to offline bounce. Real time bounce works fine.

Help With Dynamically Linking Premiere With After Effects

Recently, I edited some video footage in Adobe Premiere, dynamically linked it with After Effects, and added several effects and transitions within the latter application. However, after I thoroughly finished with my effects editing, I wished to place my After Effects Composition once more into Premiere, but this task met to no avail.
Whenever I copied, dragged, or dynamically linked the After Effects project into Premiere, the footage showed up displaying either "Media Offline" or a series of colors that you sometimes see when a tv channel is offline. Now, I did read several posts describing the dynamic link as being only ONE WAY, but is there no possible way to move my After Effects composition back into Premiere? Or do I have to start from scratch by copying the Premiere footage into After Effects, THEN dynamically linking it to Premiere?
Any help would be hugely appreciated!

Right, I realize that now, but that would require deleting the current dynamically linked After Effects project, right?
Also, I think the solution to my problem would be found if I could find a way to remove the dynamic link between After Effects and Premiere. Any ideas?

Shopping cart offline approval with outlook

Dear Experts,
Currenlt we are working on SRM 5.0 classic scenario and ECC 6.0. I want to implement shopping cart offline approval with outlook.
Can you please guide me what all are the settings need to be done for offline approvals....
Thanks
Ravi

Hi Ravi,
The program RSWUWFMLEC was used to scehdule offline approval mails upto SRM 4.0(In SRM 5.0,report RBBP_NOTIFICATION_OFFAPP is used)..
Please see the foll link for more deatils:
SRM5.0:
http://help.sap.com/saphelp_srm50/helpdata/en/31/ec423b4ac8d506e10000000a11402f/frameset.htm
SRM 4.0:
http://help.sap.com/saphelp_srm2007/helpdata/en/31/47c6cb8e9249f2bc29444212e4704a/frameset.htm
You need to check the settings mentioned in the link above before you scehdule the report for snding the approval mails to the external email ID's of the approvers.
The job mentioned are only for sending the approval mails.To send the requester notification messages to external mail box (instead of SRM inbox),see the foll thread for more pointers:
Re: mail refuse shopping cart
Do let me know if you need an further help.
BR,
Disha.

Problem with After Effects crashing machine when rendering

Ive been having a repeated problem with after effects crashing when I try to render a sequence.
The render halts then first After Effects becomes unresponsive then every other applications follows and I have to hard-restart my machine.
Can anyone help me find out how to stop this happening?

i - Illl try to answer these bellow...
What exact version of After Effects? Include the minor version number---e.g., After Effects CC (12.2.1) or After Effects CS6 (11.0.4). Do not just say "After Effects with the latest updates" or "After Effects CC"; give the specific version number.
Ive just updated it - I have After Effects CC 13.2.0.49
Have you installed the recent updates? (If not, you should. They fix a lot of problems.)
Just don'e this - not tried to render since
What operating system? This should include specific minor version numbers, like "Mac OSX v10.6.8"---not just "Mac".
Late Mac operating system Yosamete 10.10.1 (14B25)
If you are getting error message(s), what is the full text of the error message(s)?
There is no error message
What were you doing when the problem occurred? What is the exact sequence of steps that you are taking?
Performing a render, the render gets partially through but stops at different parts and hangs, then the computer hangs and I have to hard reset.
Has this ever worked before? If this worked before by doesn't work now, what has changed on your computer in the intervening time?
I had a similar problem two days ago, i thought it could be a problem with some animated png sequences and a "matte feather" effect so i replaced the sequences with non animated versions and it seemed to fix the problem.
Tell us about your computer hardware. Include CPU type and number of processor cores, amount of RAM installed, GPU, number and sizes of connected monitors, number of disk drives, and how any external drives are connected.
Model Name: Mac Pro
Model Identifier: MacPro6,1
Processor Name: 6-Core Intel Xeon E5
Processor Speed: 3.5 GHz
Number of Processors: 1
Total Number of Cores: 6
L2 Cache (per Core): 256 KB
L3 Cache: 12 MB
Memory: 32 GB
Boot ROM Version: MP61.0116.B07
SMC Version (system): 2.20f18
Illumination Version: 1.4a6
Serial Number (system): F5KM804VF694
Hardware UUID: A50DAB15-0502-5AAB-85A9-4F1B1B6DD9C1
AMD FirePro D500:
Chipset Model: AMD FirePro D500
Type: GPU
Bus: PCIe
Slot: Slot-1
PCIe Lane Width: x16
VRAM (Total): 3072 MB
Vendor: ATI (0x1002)
Device ID: 0x679e
Revision ID: 0x0000
ROM Revision: 113-C3861J-687
gMux Version: 4.0.11 [3.2.8]
EFI Driver Version: 01.00.687
Displays:
DELL UP2414Q:
Resolution: 3008 x 1692 @ 30 Hz
Pixel Depth: 32-Bit Color (ARGB8888)
Display Serial Number: WWRHC42G085L
Main Display: Yes
Mirror: Off
Online: Yes
Rotation: Supported
Connection Type: DisplayPort
Television: Yes
What versions of drivers for your graphics hardware do you have installed (including CUDA driver and driver for display adapter)?
AMD FirePro D500 3072 MB graphics
Not sure how to find out about CUDA or what it is?
Do you have any third-party I/O hardware (e.g., AJA, Matrox, Blackmagic, MOTU)?
No
What kind(s) of source footage? When telling about your source footage, tell us about the codecs, not just the container types. For example, "H.264 in a .mov container", not just "QuickTime".
Apple Prores4444 and some png sequences
Do you have QuickTime installed. (You should.) If so, what version? The answer should be specific, such as "QuickTime 7.6.2".
Quick Time player 10.4
What other software are you running?
I have the CC suite and use Premier mostly but not running anything else whilst the problem is occurring
Do you have any third-party effects or codecs installed?
I have Video Copilot optical flares (though I've tried switching this off.)
Are you using OpenGL features in After Effects?
Im not sure?
Does the problem only happen with your final output, RAM preview, or both?
Doesn't appear to hang on RAM preview
Are you using Render Multiple Frames Simultaneously multiprocessing?
Yes
Are you using the ray-traced 3D renderer?
No
If the problem is with output, give your exact output settings (both render setting and output module settings). Screenshots help.
Best Settings - Outputting as Apple Pro Res 4444
Hope this is helpful,
thanks,
Jonathan

Offline Bouncing with external effects

Similar Messages

Maybe you are looking for