Offline Database Sync Problem

Hi guys!
I'm facing some problems with offline database synchronization between my Production and Development server.
When trying to generate my development database(any objects) to my production server the Object Browser(in the Alter Role with Manual Reconcile)
the browser(Manual Reconcile one) indicates that a lot of differences are detected(even if I see in the Database Navigator that the objects are completely equal).
Here goes a screenshot:
http://img441.imageshack.us/img441/388/offdbproblem.jpg
My DB: Oracle XE 10g
Prod DB: Oracle 11g EE
Jdeveloper 11.1.1.3 using EJB 3.0.

Hello,
May I know if there is any update there?
Please let me know if I can help you more, thanks.
BR,
Steven Song
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
  Hello Steven,
  First, sorry for the late response, I have tested a few things for you:
Offline mode with background sync over a VPN connection: During scheduled sync File Explorer hangs. When bypass the cache by using a UNC path (State: Online) there is also a delay, but this is caused by bandwidth.
Online Mode with Manual Sync over a LAN connection: During sync File Explorer hangs in (redirected)UserData Folders (They are always available offline, maybe this is a problem?). With UNC paths, there is no delay…
The first folder/file is created slowly, but the second is fast.
It's like csc
still
must initialize
the cache…or something…
I m  I made some
print screens, but I can not upload them because my account is not verified.......
trT  Thanks,
 Bas

Similar Messages

  • Windows Offline Files / Sync Center - 99GB?? bug?

    Currently have a laptop connected to a domain where the user's My Documents folder is set up in Sync Center... while the laptop is on the network everything is fine and dandy, however once the user disconnects a good portion of the files and folder show
    a gray X indicating that they haven't sync'd over a local copy. When going into the 'Disk usage' tab for Sync Center, everything shows as 99GB used, 99GB available and the drive size is 999GB. If I do a manual sync I see that it fails due to not enough offline
    cache space. Attempts to change it with the 'Change size' button have failed as nothing shows up when I click on that button. Free disk space shows up as roughly 24GB free and Windows Scan Disk reveals nothing wrong with the drive. Help!

    Hi,
    Did this issue occur before ? Did the machines in the domain share the same issue with you?
    1.If the issue occured occasionally, I recommend you to  manually re-initialize the offline files database/client-side cache following this link:
    How to re-initialize the offline files cache and database in Windows XP (Win7 takes with the same path)
    https://support.microsoft.com/kb/230738?wa=wsignin1.0
    2.This issue may be caused by the group policy,please check the following policies according to the path.If you have no permission to change the policies ,please contact with your administrator.
    Here is the policies path:
    Computer Configuration\Administrative Templates\Network\Offline Files
    Limit disk space used by off line files
    Default cache size
    Prohibit user configuration of Offline files
    Here is the link for reference:
    Fixing OffLine File Cache Problems Using Group Policy
    http://www.falconitservices.com/support/KB/Lists/Posts/Post.aspx?ID=158 (link from official website would be better)
    NOTE: This response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you. Microsoft does not control these sites and has not tested any software or information found on these sites.
    3.If the issue persists, please check the Event Viewer for related error information.
    This path may be helpful:
    Event Viewer \Applications and Services\Microsoft\Windows\Offline Files
    Best regards 

  • ICal Print List Hang / Font Issue / Sync Problems...

    Okay, here's a couple issues all wrapped up into one thread/post - reason is cause I suspect they may all be tied together somehow, but am not sure.
    Sync Problems...
    Regarding the Syncing problems, you can find an ongoing thread about @ http://forums.markspace.com/viewtopic.php?t=1632
    In short, some of us are having issues with events syncing to our Palm to the wrong timezone, causing them to be an hour off (usually within the new & old DST date change). Yes, all the usual fixes have been tried - pls read the thread noting "adairnet" and ymatto" postings.
    Also, in addition to this time issue, I have iCal events that I've deleted in iCal still show up on the Palm after one-way syncing!
    Print List Hang...
    Every week I print a "list" of events from a certain calendar. The past couple weeks I noticed some lines in the notes field printing on top of each other. Twas odd indeed, but I hadn't had the time to look into the reason. Then this week I was going thru my usual printing proceedure and now iCal locks up, hangs up, crashes, forcing me to force-quit the program. It's usually after I extend the dates beyond 2 or 3 days, but I've not been able to find a consistency. I've redone events thinking they were corrupt with no success.
    Font Problems...
    After the Print List issue above, I opened my Console program to see if it was reporting anything. At first it indicated that it could not find Helvetica Neue and would substitute it for Helvetica. This put me in touch with some font corruption - so I got rid of those bad fonts and activated Helvetica Neue which got rid of that message. But made me wonder if there are more font problems causing the print hanging & syncing problems. I have FontAgent Pro and do have some font issues that I'm trying to work out.
    But the Console is displaying another string of messages every time the Print List proceedure hangs up which I cannot figure out...
    2007-04-24 16:24:54.151 iCal[28975] NSATSGlyphStorage inconsistency. Cannot find run storage for character range {138 67} for CTRun 0xDBE87D0. Ignoring the run...
    2007-04-24 16:24:55.175 iCal[28975] -[NSMutableStringProxyForMutableAttributedString replaceOccurrencesOfString:withString:options:range:] called with out-of-bounds range. For apps linked on Tiger this will raise an exception. For earlier apps it will produce this one-time warning and continue with existing behavior (which is undefined).
    2007-04-24 16:24:55.176 iCal[28975] * NSThread: ignoring exception '* -[NSMutableStringProxyForMutableAttributedString replaceOccurrencesOfString:withString:options:range:]: Range or index out of bounds' that raised during delayed perform of target 0xdde58d0 and selector 'renderPreview'
    So, all of this is causing me to wonder if the iCal or SyncServices database is corrupt. Is there a way to dig into the iCal db and check for corruption &/or fix it?
    Or does anybody have any further suggestions on any of these issues?
    thanx.jason.

    RedKamel,
    The SyncServices folder should be avoided like "a swarm of bees". This article discusses some of the issues that can arise when the SyncServices folder is deleted or modified:
    http://docs.info.apple.com/article.html?artnum=301920
    Data loss and Data corruption can result from deleting or modifying the SyncServices folder, and that data loss or corruption can be propogated to devices, .Mac, and other applications that sync with SyncServices.
    If you have isolated an issue with the other steps in your post, I would recomend speaking with AppleCare before removing that folder.
    Hope this helps,
    Nathan C.

  • Strange audi sync problem & different, stranger video sync issu in sequence

    I have two strange occurances with one particular set of media that was downloaded from the same original source mini-dv (recording in dvcam) tape. I have not found the same issue on any other footage.
    1) when the media is imported into FCP, the audio is out of sync. it is slightly out at the beginning and then gets progressively worse.
    2) when this footage is used in a sequence, the video that show in the sequence is not the same as the video that is exported when this sequence is exported as QT movie (or any other export option) Like the audio the video out of sync gets progressively worse.
    - The original media is perfectly in sync looking at the digitized source ie: in Quicktime. There is no audio out of sync problem.
    - the only difference I could see in the file was that this media is 3.5mb data rate whereas all the others are 3.6mb.
    - other tapes from the same camera do not have a problem
    - I do all my downloading from a firewire deck and not from the camera
    - I upgraded from 6.0.1 to 6.0.4 (as did the QT 7.5 upgrade also) to see if that fixed the problem but to no avail.
    Very perplexing. I managed to work around this problem in a sequence whos deadline was looming by manually slipping the footage in the sequence the required number of frames. This is where it also gets odd. I was able to do this by
    - double click the clip in the sequence which then loaded that into the viewer.
    - position the playhead at the beginning of the clip
    - from the canvas select the go to position in master clip option which then loaded the masterclip into the viewer. the position in the masterclip was always the correct frame (ie the frame I expected to see as per my edit). The frame showing in the canvas was also the correct frame (but this would not be the case when exported)
    - the next thing i did was to use the slip tool, as soon as i held the slip tool over the sequence clip, the frame in the canvas would be the wrong frame (the frame i would see when I exported).
    - then i would just carefully slip the sequence clip back to the matching correct frame. So watching in the viewer, I would align the frame that showed in the viewer to the frame in the canvas.
    When done the frame showing in my sequence would be a completely different frame but when exported, the frame that I expected to see would be the exported frame.
    I could find no logic to the amount I needed to slip each time (I am sure there is logic but I couldnt figure out what that was). the clip at the end of the footage needed to be slipped -10:09, and this got progressively smaller to the clip at the beginning of footage needing to be slipped -:16
    Hopefully that wasnt too confusing.

    btw, i have tried recapturing the footage and i have offlined it, copied it to another location and onlined it in the new location to no avail. still have the sync and video in sequence issues.

  • TP4 : big instability in offline database object edition and diagraming

    I encountered a lot of problems when editing offline database objects and in database diagraming.
    Foreign keys don't appear in diagram after creating it, i'm not able to delete a broken foreign key (the ok button don't react, i can only cancel my changes).
    It is no more possible to drag and drop attribute from a table to another table (copy).

    Peter,
    Glad to see you took my advice and posted your question over here. Although I am a frequent user of the Oracle usenet groups, I have found that this is a much better place to get help with Spatial. My experiences suggest that the population of people using spatial is small--and of them the ones that really know alot are few and far between. I can only claim to be in the former group.
    As far as your problem goes--this is probably something you've already considered--is there a way to model the data such that you don't have to replicate the geometry components? Another option would be to handle the replication without using snapshots. Examples would be to export the data and then ftp/copy it to the target machines and import it. If you need real-time replication you could experiment with triggers that execute INSERTs/UPDATEs/DELETEs on the remote databases. This of course has its own issues--but you're going to end up with some sort of compromise no matter how you slice this.
    Of course you could use the relational model. I have never used it so I'm hard pressed to give any advice on it. As I posted on the usenet board, it is heading for desupport in 9i Release 2 according to the documentation available. So if you go relational you'll eventually have to migrate to object/relational. I'm not sure how automatic (or non-automatic) that process is. Hopefully someone on here will have some more concrete advice on that.
    Good luck.
    Matt.

  • Sync problem: ArrayIndexOutOfBoundsException: 4097

    Sync problem
    Hello,
    Synchronisation goes fine untill the moment i insert a huge number of rows into two tables. When synchronize after the inserts i get following message at client/device : An internal error has occurred. 4097.
    At Server i get:
    Sync session exception stack trace:
    java.lang.ArrayIndexOutOfBoundsException: 4097
    at oracle.lite.sync.okrl4p_tField_MD.object2ByteArray(Unknown Source)
    at oracle.lite.sync.OKRL4PRecord.getData(Unknown Source)
    at oracle.lite.sync.HeliosSession.sendPayload(Unknown Source)
    at oracle.lite.sync.HeliosSession.sendSubData(Unknown Source)
    at oracle.lite.sync.HeliosSession.downloadSubs(Unknown Source)
    at oracle.lite.sync.HeliosSession.startSession(Unknown Source)
    at oracle.lite.sync.resume.Client$1.run(Unknown Source)
    at oracle.lite.sync.resume.ThreadPool$PoolTask.run(Unknown Source).
    When I delete the inserted rows everything goes fine.
    Anyone knows how to solve this problem?

    - Where did you insert new records, on client or server?
    - Please try put this line on webtogo.ora:
    USE_JVM_COMPRESSION=NO
    Bounce your mobileserver and re-sync it again.
    If not succes, try to delete *snd.bin file in /mobileclient/oldb40 directory, but you need to update C$INFO in conscli database to indicate that send file does not exist.
    Good luck...

  • 2008 R2/ Win7 Offline Files Sync causing High Load on server

    Hi Everyone,
    I have recently been investigating extremely high CPU Usage from the System Process on my company's main File Cluster.
    We managed to track SRV2.sys Threads causing high CPU load within the system process, but was having issues identifying why this was the case.
    As per Microsoft's direction via support call, we have installed the latest SRV2.sys Hotfixes, but this does not appear to have allivated the issue we are experiencing. We have also added more CPU and Memory into both nodes, which has not helped either.
    We have since managed to create a system dump and is being sent to MS Support for analysis.
    I have noticed the following that appears to happen on our cluster:
    Whenever our CAD/Design department run certain functions within their apps running on a windows 7 client (apps include MicroStation, Revit, AutoCAD etc) we see a massive spike and flatline of the system process.
    We found several users with Windows 7 clients that have Configured Offline File to sync an entire Network Volume (some volumes are 2TB Plus, so would never fit on a users computer anyway, i was quite shocked when I found this). How we spotted this was through
    Resource Monitor, the System Process was trolling through all the folders and files in a given volume (it was "reading every single folder). Now, while this was the system process, we could identify the user by using the Open Files view in Server Manager's
    Share and Storage Management tool.
    I have done a fair bit of research and found that a lot of CAD/Drawing applications in the market have issues with using SMB2 (srv2.sys). When reviewing the products that we use, I noticed that a lot of these products actually recommended disabling SMB2
    and reverting to SMB1 on File Server and/or the clients.
    I have gone down the path of disabling SMB2 on all Windows 7 clients that have these CAD Applications installed to assist with lowering the load (our other options are to potentially shift the CAD Volumes off our main file cluster to further isolation these
    performance issues we have been experiencing.) We will be testing this again tomorrow to confirm that the issue is resolved when mass amounts of CAD users access data on these volumes via their CAD Application.
    We only noticed the issue with Offline Files today with trying to sync an ENTIRE Volume. My questions are:
    Should Offline File sync's really cause this much load on a File Server?
    Would the the size of the volume the sync is trying to complete create this additional load within the system process?
    What is the industry considered "Best Practice" regarding Offline Files setup for Volumes which could have up to 1000+ users attached? (My personal opinion is that Offline Files should only be sync of user "Personal/Home" Folders
    as they users themselves have a 1 to 1 relationship with this data.)
    Is there an easier way to identify what users have Offline Files enabled and "actually being used" (from my understanding, Sync Center and Offline Files are enabled by default, but you obviously have to add the folders/drives you wish to sync)?
    If I disable the ability for Offline Files on the volumes, what will the user experience be when/if they try to sync their offline files config after this has been disabled on the volume?
    Hoping for some guidance regarding this setup with Offline Files.
    Thanks in Advance!
    Simon

    Hi Everyone,
    Just thought I would give an update on this.
    While we're still deploying http://support.microsoft.com/kb/2733363/en-us to
    the remainder of our Windows 7 SP1 fleet, according to some Network Traces and XPerf that were sent to MS Support, it looks as though the issu with the Offline Files is now resolved.
    However, we are still having some issues with High CPU with the System Process in particular. Upon review of the traces, they have found a lot of ABE related traffic, leading them to believe that the issue may also be caused by ABE Access on our File Cluster.
    We already have the required hotfix for ABE on 2008 R2 installed (please see
    http://support.microsoft.com/kb/2732618/en-us), although we have it set to a certain value that MS believe may be too high. Our current value is set to "5", as that is the lowest level of any type of permission is set (i.e. where the lowest level of inheritance
    is broken).
    I think I will mark this as resolved regarding the Offline Files issue (as it did resolve the problem with the Offline Files)...
    Fingers crossed we can identify the rest of the high load within the System Process!!!

  • 10g Rename Offline Database Object Broken

    I am trying to rename an offline database object. I opened the editor on the object, updated its name and the names of a few of its foreign keys. At first, it appeared to work. The object in the Navigator had the new name, and when I opened a diagram containing the object, all the new names appeared correctly. I saved everything, closed the IDE and reopened it (which is usually the way I get TopLink to correctly identify my changes). When I reopened the IDE, my offline db objects were back to their old names. I tried renaming them again, and this time when I hit the save icon, I got the following error:
    Local Exception Stack:
    Exception [TOPLINK-6004] (Oracle9iAS TopLink - Release 2 (9.0.4.0) (Build 030612)): oracle.toplink.exceptions.QueryException
    Exception Description: The object [MWTable[30B652] (AVEGA.USER_DIMENSION_SELECTIONS)], of class
    [class oracle.toplink.workbench.model.db.MWTable], with identity hashcode (System.identityHashCode()) [3,192,402],
    is not from this UnitOfWork object space, but the parent session's.  The object was never registered in this UnitOfWork,
    but read from the parent session and related to an object registered in the UnitOfWork.  Ensure that you are correctly
    registering your objects.  If you are still having problems, you can use the UnitOfWork.validateObjectSpace() method to
    help debug where the error occurred.  For more information, see the manual or FAQ.
         at oracle.toplink.exceptions.QueryException.backupCloneIsOriginalFromParent(QueryException.java:152)
         at oracle.toplink.publicinterface.UnitOfWork.getBackupClone(UnitOfWork.java:1505)
         at oracle.toplink.publicinterface.UnitOfWork.calculateChanges(UnitOfWork.java:426)
         at oracle.toplink.publicinterface.UnitOfWork.getChanges(UnitOfWork.java:1560)
         at oracle.toplink.workbench.ui.WorkbenchSession.saveProject(WorkbenchSession.java:675)
         at oracle.toplink.addin.persistence.MWJDeveloperPersistence.save(MWJDeveloperPersistence.java:226)
         at oracle.toplink.tsceditor.persistence.PersistenceManager.save(PersistenceManager.java:1047)
         at oracle.toplink.addin.manager.MWJDeveloperMediator.saveMWProjectFor(MWJDeveloperMediator.java:394)
         at oracle.toplink.addin.node.MWProjectNode.save(MWProjectNode.java:345)
         at oracle.ide.cmd.SaveAllCommand.saveAll(SaveAllCommand.java:64)
         at oracle.ide.cmd.SaveAllCommand.doit(SaveAllCommand.java:118)
         at oracle.ide.CommandProcessor.invoke(CommandProcessor.java:376)
         at oracle.ide.CommandProcessor.invoke(CommandProcessor.java:112)
         at oracle.ide.Ide.handleEvent(Ide.java:1884)
         at oracle.ide.addin.BaseController.handleEvent(BaseController.java:99)
         at oracle.ideimpl.navigator.NavigatorController.handleEvent(NavigatorController.java:133)
         at oracle.ide.IdeAction.performAction(IdeAction.java:829)
         at oracle.ide.IdeAction$1.run(IdeAction.java:781)
         at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:178)
         at java.awt.EventQueue.dispatchEvent(EventQueue.java:448)
         at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:197)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:150)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:144)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:136)
         at java.awt.EventDispatchThread.run(EventDispatchThread.java:99)What do I need to do to safely rename an offline database object?

    Hi John,
    Thank you for taking the time to reporting this problem that you have encountered. The exception you have listed below is the result of changes not being communicated correctly between your offline database object modeling diagram and the TopLink Mapping Editor. We have addressed this problem and the solution will be available for you in the next JDeveloper release. For the meantime, your best bet would be to make any necessary changes to your database model prior to mapping those tables. I know that this is not exactly ideal, but it will ensure that you do not encounter this problem. I hope this helps and let me know if I can provide you with any additional information.
    Thanks,
    John Bracken
    Toplink Development Team

  • TP4 / offline database / select in navigator failed

    Select in navigator from pl/sql editor failed to find the edited object into the navigator (from where it was opened).

    I just opened a pl/sql from offline database navigator.
    Do some edits in the editor. Save many times. Compile many times.
    Suddenly (no idea why), the context menu Select in navigator don't find the object anymore.
    This is only for package body. I don't have this problem with package specification.
    Same package body may be accessed without any problem at same time through outgoing subversion pending changes.
    The error message is PackageName was not found in Navigator.
    The window title bar context is correct.
    I have more than one schema in my navigator.
    I have two application workspaces and both have same project names.
    I have subversion to manage both workspaces.
    Hope this help.

  • Working with offline databases

    hello.....
    can anyone pls help me out working with offline databases.i have created an offline database in jdeveloper.Now the UI components of my client tier application have to be bound to these attributes of the offline table.....
    how can this be done??

    I had same problem months ago and I was finally only able to create adf bc object from an online database, with an active connection. I simply created an oracle instance in my own development machine and I used the database offline objects to synchronize all my objects when the common development database was not accessible. This mean that offline objects my be refreshed when somebody else do a change.

  • Sync problem with OVI / Outlook of the notes with ...

    Hello,
    I'm desperate and close to open the gaz :-). I used to sync my Outlook notes with all my former phones with PC-suite. Since I have a new N8, I'm forced to use OVI instead of PC-Suite as it doesn' support this model phone. Everything seems to be possible in the set up but the sync doesn't work and always return an error code : 83860026. It even ask to reinstall Outlook which took sometime but never changed anything. As it might be due to other unknown variables, I tried the same Outlook database with other PC with XP or W7, office 2003, 2007 and even 2010 and the sync always fail with the same miserable error code. I'm fairly suprised to see this problem still there since I gave up, years ago, to use OVI because of this. My N97 and 6303 do the same. Can someone bring some good help to resolve this annoying trouble please?  
    Thanks in advance, Fabrice

    Dear Satari,
    thanks a lot for the advice but in the meantime I found another post stating that version 7.1.40.6 PC-Suite works great with the N8. I kept it in my archives and I can state that it WORKED GREAT in less than 5mn!
    So far your suggestions might resolve the OVI sync problem but I have no more courage to follow it. I was yet using the latest version of OVI and W7 and Office2010.  
    However, if it would work, I would recommand the OVI software team to find out why one of their software work very fine while the other seem to cause trouble to the entire world. I could not find a single complain about PC-Suite while the support discussion ifs full of OVI reported troubles for the last 2,5 years. What a shame!
    Furthermore, it is unacceptable that NOKIA force their client to use OVI with any phone while they know this software is so unstable. I would add that the "gift" is even worst when it comes to the most expensive product of the range. As the general manager of a software company, I have learnt that it is never good to insist with a product when the development team is unable to cope with bugs and troubles. Whatever the cause could be, it is better to restart from scratch and get rid of EVERYTHING and EVERYBODY involved in the mess! Please Mr Nokia new president, act positively and do your homeworks in the interest of your clients and sharholders. Additionnally, if I had not spoken English I would still be on the road side! Thanks in advance to care of us MORE.

  • New Ipod Classic syncing problems, restoring problems

    Hello,
    Just got my 80gb Ipod Classic yesterday, and have had syncing problems, and now Itunes does not recognize it at all.
    I'm using the latest version of Itunes (7.6.2.9)
    Ipod Firmware 1.1.2 (or whatever the newest is)
    Windows XP Pro
    I'm a long-time user of a 5g 30gb Ipod and never have had issues like this. I am syncing to the same Itunes library as my old Ipod. Connecting my new Ipod Classic, I updated the firmware, and tried to sync. Halfway through the sync, I got an error. I disconnected the ipod and reset it. I tried syncing again, and again it would hang at some point, had to disconnect, and then it said my ipod had no music, but with 60gb free only. So obviously a database problem on the ipod and some mp3 files that my new ipod classic didn't like (though my old 5g ipod has no problem with this library).
    Next, I connected and did a Restore.
    I removed the culprit mp3 files from Itunes Library, attempted to sync again. Again, it would freeze at some point during sync. Had to disconnect Ipod while Itunes was frozen. Again, Ipod says has no music but with only about 60gb free.
    So Ipod is corrupted again. The problem is when I connect it to my PC, Itunes no longer recognizes it, so I can't do a Restore. What do I do?

    Just wanted to post my results, for future users benefit:
    Putting my Ipod into Disk Mode, connected to computer, Itunes recognized it, performed a Restore.
    Still had syncing/freezing issues.
    Decided that my Itunes library database was corrupted. Went into My Documents > My Music, and deleted the Itunes Folder, except for the containing Artwork Folder.
    Have been rebuilding my Library from scratch since, and have had no syncing problems yet again.
    Only problem is that in the outermost Podcast menu, it is always empty. The only conveninent way to access my Podcasts is to make a playlist and put them all in it.

  • Lip sync problems on Prisoner

    Has anyone had lip sync problems on the downloaded (to Apple TV) of episode 3 of Prisoner?
    I find that the speech is appx. 3 seconds ahead of the visuals. It's the same on the download to computer version also. Haven't contacted Apple support team yet as I first wanted to find out if it's a common problem.

    oldgroover wrote:
    They've refunded me for this episode, but not for the whole series which is now spoiled for me (and which I've canceled)
    That's the point really - it's a 6 part series and one messed up episode will ruin the whole experience and devalues the rest of the episodes.
    It's a shame they've not refunded all the episode costs to date to you or at the very least made some other kind of gesture of goodwill. What's worrying is an apparent lack of concern over all these itunes store issues that crop up - as a user you want confidence that when you're paying for what are in essence proprietary versions of DRM protected media that you can actually use and enjoy them properly.
    I have many music videos purchased in last few years which are now available DRM free with higher sound quality - I've upgraded may be 40% but a large proportion are not offered even though they are available - several reports to store support simply return a kind of stock along the lines of 'not all old purchases have been updated in the database yet as available for iTunes plus' - I mean it's gotta be over a year now since the store went iTunes Plus for music.
    I've resumed buying music video DVDs now - for the cost of 2 or 3 iTunes Plus music videos I can often get a DVD compilation fro the same artist cheaper.
    UK pricing is crazy, and I don't know if it's Apple or the media companies. I've mentioned the original Star Trek tv series that appeared on iTunes UK a few weeks ago - about 10 USD for series 1, but no £54 in the UK, and the previews show crap encoding with jaggies on edges everywhere.

  • JDEV 11G TP4 [BUG]: Offline Database / Copying from another workspace

    see JDEV 11G TP4 [BUG]: Offline Database / Copying project from workspace
    Message was edited by:
    micwic

    I completely reinstall JDev and set it to use subversion ... that resolve the problem and i'm no more in a position to reproduce it.

  • Webtogo sync problems

    Hi,
    we have some problems syncing the server with one of our webtogo
    clients. When syncing we get the following exception on the server :
    log0: user_status is VALID
    log0: FileDownload: LOGOFF
    log3: java.sql.SQLException: Fehler bei Stapelverarbeitung aufgetreten: batch must be either executed or cleared
    log3: at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:168)
    log3: at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:210)
    log3: at oracle.jdbc.driver.OraclePreparedStatement.checkIfJdbcBatchExists(OraclePreparedStatement.java:2707)
    log3: at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:348)
    log3: at oracle.lite.sync.Subscription.execPrepUpdate(Subscription.java:3300)
    log3: at oracle.lite.sync.HeliosSession.executeInsertUpdate(HeliosSession.java:2230)
    log3: at oracle.lite.sync.HeliosSession.executeU(HeliosSession.java:1662)
    log3: at oracle.lite.sync.HeliosSession.<init>(HeliosSession.java:2817)
    log3: at oracle.lite.sync.ConsolidatorServlet.doPost(ConsolidatorServlet.java:323)
    log3: at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
    log3: at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    log3: at oracle.lite.web.JupServlet.service(JupServlet.java:190)
    log3: at oracle.lite.web.AppServletHandler.handle(AppServletHandler.java:282)
    log3: at oracle.lite.web.JupApplication.service(JupApplication.java:350)
    log3: at oracle.lite.web.PublicApp.service(PublicApp.java:97)
    log3: at oracle.lite.web.JupHandler.handle(JupHandler.java:97)
    log3: at oracle.lite.web.HTTPServer.process(HTTPServer.java:302)
    log3: at oracle.lite.web.HTTPServer.handleRequest(HTTPServer.java:162)
    log3: at oracle.lite.web.JupServer.handle(JupServer.java:312)
    log3: at oracle.lite.web.SocketListener.process(SocketListener.java:157)
    log3: at oracle.lite.web.SocketListener$ReqHandler.run(SocketListener.java:208)
    log0: ID: null
    log0: handler: /ping /
    How can i manually trigger the executing of the batch, or how
    can i clear the batch on the server manually ? The problem is
    that the user has made some changes in the local database and
    i do not want to lose that changes. Reinstalling the mobile client
    on the laptop would probably fix the sync problem, but that is not
    really an option.
    Any ideas how i can fix / get rid of the exception above ?
    Thanks,
    Andreas

    Hi
    we also faced this problem. But we reinstalled the client and resynchronized. Any ideas will be greatly appreciated.
    Yugandhar

Maybe you are looking for