Offline (error code 4)
Everytime I launch the Spotify app, eventually it will give me an error code 4, and nothing will be playable. I have a working internet connection (everything works on my browser). Only when I go to relaunch the app, will it get out of the offline mode. It never used to do this. Any ideas as to how to fix the issue? It does the same thing on the release version as well as the latest beta version.
Hello there,
If you log out and back in when this happens, does the desktop loads normally or the same problem still occurs ?
If the problem persists you can try a full reinstall. You can download the last version here :
Mac: http://download.spotify.com/SpotifyInstaller.zip
PC: http://download.spotify.com/SpotifySetup.exe
Similar Messages
-
Keeps on going offline - Error Code 102, 112, 117, etc
for some strange reason, my spotify keeps going offline. i have tryed to log off and long back in and it would log me in offline mode. i have checked my firewall and it lets it go through. i have even tryed to uninstall it and install it again and the same issues. don't know why this is happening.
I also keep getting the same issues, ever since updating to the newer version it keeps throwing me offline and I'm unable to play music. This is accompanied by errors ranging from 9-117, though I did just get an error 404 as well when trying to log in again.
It's getting through my work firewall fine, it's a problem with the actual Spotify service itself then! -
Error codes-keep getting booted offline
I have the same issue When I start the Ps3 then Start the Game (GTA V) it immediately logs me out of PSN showing an Error Code (80028ED6).
Anyone know anything about this ?First thing to try is reboot your network equipment by switching off for a minute or two.If problems persist look at some firewall management by either opening ports and/or setting up a DMZ,plenty of information in the links below. https://support.rockstargames.com/hc/en-us/articles/200525767-GTA-Online-Connection-Troubleshooting http://portforward.com/english/applications/port_forwarding/publishers/Rockstar_Games.htm http://community.eu.playstation.com/t5/PSN-Support/How-to-put-your-PS3-or-PS4-into-a-DMZ/td-p/10655314 If using a wireless connection upgrade to a wired connection,either by ethernet cable or powerline network adapters.Rockstar games can struggle over wireless connections because of the amount of data being sent to and from the server,a reasonably upload speed is also needed at least 1mb upwards.
-
Error code 6 & media offline & after effect warning errors.
Increasingly I am getting the attached error messages when I try to open files. (mostly .psd and .ind files)
1.) It often says I don’t have permission to open the file, it is not the right type of file, or the file doesn’t exist... none of which are true.
The files always work if I copy them locally and open them from my harddrive.
2.) "media offline" error.
3.) after effects warning error.
Help needed. Thx.Hi Saif,
You might get several issues, if you are directly opening files from the server or a network location, to your machine and editing them. You might also get issue while saving then to the server. I think your issue is one of them.
This is because, several thing comes into picture while you are opening, editing, saving files over the network. You may face some network issues, firewall issues and mostly permissions issues.
So, adobe always recommends to save the file locally on the machine first and then perform editting and saving operations. once you are done, you can copy it to the network.
Check the below article just for reference.
http://helpx.adobe.com/photoshop/kb/networks-removable-media-photoshop-cs5.html
Cheers!!
Arpit -
ORA-00600: internal error code, arguments: [17183], [0x033134908], [], [],
Hi Exports,
I am getting the ORA-00600: internal error code, arguments: [17183], [0x033134908], [], [], [], [], [], []
The temporary tablespace of the database is full and i am trying to do the following steps.
SQL> select * from dba_temp_files;
FILE_NAME FILE_ID TABLESPACE_NAME BYTES Blocks Etat RELATIVE_FNO AUT MAXBYTES MAXBLOCKS INCREMENT_BY
USER_BYTES USER_BLOCKS
G:\ORADATA\TEMP01.DBF 1 TEMP 3.4359E+10 4,194,176 AVAILA 1 YES 3.4360E+10 4194302 80
3.4358E+10 4194048
J:\ORADATA\TIVOLIORTEMPTS.DBF 5 TIVOLIORTEMPTS 104857600 12,800 AVAILA 1 NO 0 0 0
103809024 12672
J:\ORADATA\TEMP_ORISSA_MASTER.TMP 2 TEMP_ORISSA_MASTER 10485760 1,280 AVAILA 1 YES 52428800 6400 128
9437184 1152
J:\ORADATA\TEMP_ORISSA_BENCHMARK.TMP 3 TEMP_ORISSA_BENCHMARK 680525824 83,072 AVAILA 1 YES 1073741824 131072 2
679477248 82944
J:\ORADATA\TEMP_ORISSA_TRANSACTION 4 TEMP_ORISSA_TRANSACTION 104857600 12,800 AVAILA 1 YES 1073741824 131072 2
103809024 12672
5 rows selected.
SQL> select TABLESPACE_NAME, BYTES_USED, BYTES_FREE from V$TEMP_SPACE_HEADER;
TABLESPACE_NAME BYTES_USED BYTES_FREE
TEMP 3.4359E+10 0
TEMP_ORISSA_MASTER 4194304 6291456
TEMP_ORISSA_BENCHMARK 680525824 0
TEMP_ORISSA_TRANSACTION 37748736 67108864
TIVOLIORTEMPTS 1048576 103809024
5 rows selected.
SQL> CREATE TEMPORARY TABLESPACE MYTEMPFILE
2 TEMPFILE 'G:\ORADATA\TEMP001.dbf'
3 SIZE 1000M AUTOEXTEND ON NEXT 10M MAXSIZE 2000M;
Tablespace created.
SQL> ALTER DATABASE DEFAULT TEMPORARY TABLESPACE MYTEMPFILE;
Database altered.
SQL> select TABLESPACE_NAME, BYTES_USED, BYTES_FREE from V$TEMP_SPACE_HEADER;
TABLESPACE_NAME BYTES_USED BYTES_FREE
TEMP 3.4359E+10 0
TEMP_ORISSA_MASTER 4194304 6291456
TEMP_ORISSA_BENCHMARK 680525824 0
TEMP_ORISSA_TRANSACTION 37748736 67108864
TIVOLIORTEMPTS 1048576 103809024
MYTEMPFILE 1048576 1047527424
6 rows selected.
SQL> ALTER DATABASE TEMPFILE 'G:\ORADATA\TEMP01.DBF' DROP INCLUDING DATAFILES;
ALTER DATABASE TEMPFILE 'G:\ORADATA\TEMP01.DBF' DROP INCLUDING DATAFILES
ERROR at line 1:
ORA-25152: TEMPFILE cannot be dropped at this time
SQL> select TABLESPACE_NAME, BYTES_USED, BYTES_FREE from V$TEMP_SPACE_HEADER;
TABLESPACE_NAME BYTES_USED BYTES_FREE
TEMP_ORISSA_MASTER 4194304 6291456
TEMP_ORISSA_BENCHMARK 680525824 0
TEMP_ORISSA_TRANSACTION 37748736 67108864
TIVOLIORTEMPTS 1048576 103809024
MYTEMPFILE 11534336 1037041664
5 rows selected.
SQL> select STATUS,ENABLED,STATUS,BYTES/1024/1024 from v$tempfile;
Etat ENABLED Etat BYTES/1024/1024
OFFLIN READ WRITE OFFLIN 0
ONLINE READ WRITE ONLINE 100
ONLINE READ WRITE ONLINE 10
ONLINE READ WRITE ONLINE 649
ONLINE READ WRITE ONLINE 100
ONLINE READ WRITE ONLINE 1000
6 rows selected.
SQL> desc v$tempfile;
Name Null? Type
FILE# NUMBER
CREATION_CHANGE# NUMBER
CREATION_TIME DATE
TS# NUMBER
RFILE# NUMBER
STATUS VARCHAR2(7)
ENABLED VARCHAR2(10)
BYTES NUMBER
BLOCKS NUMBER
CREATE_BYTES NUMBER
BLOCK_SIZE NUMBER
NAME VARCHAR2(513)
SQL> select file#,STATUS,ENABLED,STATUS,BYTES/1024/1024 from v$tempfile;
FILE# Etat ENABLED Etat BYTES/1024/1024
1 OFFLIN READ WRITE OFFLIN 0
5 ONLINE READ WRITE ONLINE 100
2 ONLINE READ WRITE ONLINE 10
3 ONLINE READ WRITE ONLINE 649
4 ONLINE READ WRITE ONLINE 100
6 ONLINE READ WRITE ONLINE 1000
6 rows selected.
SQL> ALTER DATABASE TEMPFILE 'G:\ORADATA\TEMP01.DBF' DROP INCLUDING DATAFILES;
ALTER DATABASE TEMPFILE 'G:\ORADATA\TEMP01.DBF' DROP INCLUDING DATAFILES
ERROR at line 1:
ORA-25152: TEMPFILE cannot be dropped at this time
SQL> ALTER DATABASE TEMPFILE 'G:\ORADATA\TEMP01.DBF' offline;
Database altered.
SQL> ALTER DATABASE TEMPFILE 'G:\ORADATA\TEMP01.DBF' DROP INCLUDING DATAFILES;
ALTER DATABASE TEMPFILE 'G:\ORADATA\TEMP01.DBF' DROP INCLUDING DATAFILES
ERROR at line 1:
ORA-25152: TEMPFILE cannot be dropped at this time
SQL> select * from dba_temp_files;
FILE_NAME FILE_ID TABLESPACE_NAME BYTES Blocks Etat RELATIVE_FNO AUT MAXBYTES MAXBLOCKS INCREMENT_BY
USER_BYTES USER_BLOCKS
G:\ORADATA\TEMP01.DBF 1 TEMP AVAILA
J:\ORADATA\TIVOLIORTEMPTS.DBF 5 TIVOLIORTEMPTS 104857600 12,800 AVAILA 1 NO 0 0 0
103809024 12672
J:\ORADATA\TEMP_ORISSA_MASTER.TMP 2 TEMP_ORISSA_MASTER 10485760 1,280 AVAILA 1 YES 52428800 6400 128
9437184 1152
J:\ORADATA\TEMP_ORISSA_BENCHMARK.TMP 3 TEMP_ORISSA_BENCHMARK 680525824 83,072 AVAILA 1 YES 1073741824 131072 2
679477248 82944
J:\ORADATA\TEMP_ORISSA_TRANSACTION 4 TEMP_ORISSA_TRANSACTION 104857600 12,800 AVAILA 1 YES 1073741824 131072 2
103809024 12672
G:\ORADATA\TEMP001.DBF 6 MYTEMPFILE 1048576000 128,000 AVAILA 1 YES 2097152000 256000 1280
1047527424 127872
6 rows selected.
SQL> select file#,STATUS,ENABLED,STATUS,BYTES/1024/1024 from v$tempfile;
FILE# Etat ENABLED Etat BYTES/1024/1024
1 OFFLIN READ WRITE OFFLIN 0
5 ONLINE READ WRITE ONLINE 100
2 ONLINE READ WRITE ONLINE 10
3 ONLINE READ WRITE ONLINE 649
4 ONLINE READ WRITE ONLINE 100
6 ONLINE READ WRITE ONLINE 1000
6 rows selected.
SQL> ALTER DATABASE DEFAULT TEMPORARY TABLESPACE temp;
Database altered.
SQL> select TABLESPACE_NAME, BYTES_USED, BYTES_FREE from V$TEMP_SPACE_HEADER;
TABLESPACE_NAME BYTES_USED BYTES_FREE
TEMP_ORISSA_MASTER 4194304 6291456
TEMP_ORISSA_BENCHMARK 680525824 0
TEMP_ORISSA_TRANSACTION 37748736 67108864
TIVOLIORTEMPTS 1048576 103809024
MYTEMPFILE 28311552 1020264448
5 rows selected.
SQL> ALTER DATABASE TEMPFILE 'G:\ORADATA\TEMP01.DBF' online;
Database altered.
SQL> select TABLESPACE_NAME, BYTES_USED, BYTES_FREE from V$TEMP_SPACE_HEADER;
TABLESPACE_NAME BYTES_USED BYTES_FREE
TEMP 3.4359E+10 0
TEMP_ORISSA_MASTER 4194304 6291456
TEMP_ORISSA_BENCHMARK 680525824 0
TEMP_ORISSA_TRANSACTION 37748736 67108864
TIVOLIORTEMPTS 1048576 103809024
MYTEMPFILE 28311552 1020264448
6 rows selected.
SQL> ALTER DATABASE DEFAULT TEMPORARY TABLESPACE MYTEMPFILE;
Database altered.
SQL> ALTER DATABASE TEMPFILE 'G:\ORADATA\TEMP01.DBF' DROP INCLUDING DATAFILES;
ALTER DATABASE TEMPFILE 'G:\ORADATA\TEMP01.DBF' DROP INCLUDING DATAFILES
ERROR at line 1:
ORA-25152: TEMPFILE cannot be dropped at this time
SQL> ALTER DATABASE TEMPFILE 'G:\ORADATA\TEMP01.DBF' offline;
Database altered.
SQL> ALTER DATABASE TEMPFILE 'G:\ORADATA\TEMP01.DBF' DROP INCLUDING DATAFILES;
ALTER DATABASE TEMPFILE 'G:\ORADATA\TEMP01.DBF' DROP INCLUDING DATAFILES
ERROR at line 1:
ORA-25152: TEMPFILE cannot be dropped at this time
SQL> ALTER DATABASE TEMPFILE 'G:\ORADATA\TEMP01.DBF' online;
Database altered.
SQL> ALTER DATABASE DEFAULT TEMPORARY TABLESPACE temp;
Database altered.
SQL> select TABLESPACE_NAME, BYTES_USED, BYTES_FREE from V$TEMP_SPACE_HEADER;
TABLESPACE_NAME BYTES_USED BYTES_FREE
TEMP 3.4359E+10 0
TEMP_ORISSA_MASTER 4194304 6291456
TEMP_ORISSA_BENCHMARK 680525824 0
TEMP_ORISSA_TRANSACTION 37748736 67108864
TIVOLIORTEMPTS 1048576 103809024
MYTEMPFILE 32505856 1016070144
6 rows selected.
SQL> exit
I am not able to drop the Temp file as it is used by some users.
When i checked my Alert Log then i am getting the ora-600 error....
When i check metalink for this argument i found that its a bug in 91 &10gR2
Please suggest some solution of this problem.
Is it a serious issue of database.Robert Geier wrote:
If you kill the sessions using the tempfile, or restart the database you may be able to drop it. Or you could try to shrink the tempfile instead of drop.
Not sure why you are doing that though ? If the temp tablespace is full, check what is using the space, or add another tempfile to the tablespace.No I am not killing the sessions... But i just checked using following query that some users are using the temp Tablespace at that time. But i did not kill any session.
select 'alter system kill session '''||a.sid||','||a.serial#||''' immediate;'
from
v$session a,
v$sort_usage b,
v$process c,
v$parameter d
where
d.name = 'db_block_size'
and
a.saddr = b.session_addr
and
a.paddr = c.addr
and
b.tablespace='TEMP'
and
a.status='ACTIVE'
order by
b.tablespace,
b.segfile#,
b.segblk#,
b.blocks; -
Windows Update Error code 80072ee2
I am running Windows 7 Home Premium 64 bit and I keep getting the error code 80072ee2 Windows could not search for Updates. I know there are several other posts but none of them are helping me. I have tried the steps from microsoft but nothing worked. Please
help.
I am seriously thinking about going back to XP
Dell Inspirion 580
OS: Windows 7 Home Premium 64-bit
2.67 GHz
Intel (R) Core (TM)i5 CPUHi MowGreen,
I'm sure you have guessed by the log pasted below, that the MS Safety Scanner did not find anything to correct on my computer.
I believe the first line is the version information you were requesting be included in the log. Your help has been Mowst appreciated.
Thanks, ZG
9/6/2012
21:10:28:519
1124
1984
Report
WER Report sent: 7.6.7600.256 0x80246008 5F64A8C3-B42C-48F7-9925-0429E9C548D2 Download 101 Unmanaged
9/6/2012
21:10:28:550
1124
1984
Report
CWERReporter::HandleEvents - WER report upload completed with status 0x8
9/6/2012
21:10:28:550
1124
1984
Report
WER Report sent: 7.6.7600.256 0x80246008 6C35C3C6-E8A6-4C26-AD5A-2B12C6097919 Download 101 Unmanaged
9/6/2012
21:10:28:550
1124
1b70
AU
Successfully wrote event for AU health state:0
9/6/2012
21:10:28:566
1124
1b70
AU
>>## RESUMED ## AU: Download update [UpdateId = {CC0ADE33-EC3B-4D16-A281-338396F58DCB}]
9/6/2012
21:10:28:566
1124
1b70
AU
# WARNING: Download failed, error = 0x80246008
9/6/2012
21:10:28:566
1124
1984
Report
CWERReporter::HandleEvents - WER report upload completed with status 0x8
9/6/2012
21:10:28:566
1124
1984
Report
WER Report sent: 7.6.7600.256 0x80246008 024F10D4-B471-422D-B393-39456CBA18D8 Download 101 Unmanaged
9/6/2012
21:10:28:582
1124
1b70
AU
Successfully wrote event for AU health state:0
9/6/2012
21:10:28:582
1124
1b70
AU
Currently showing Progress UX client - so not launching any other client
9/6/2012
21:10:28:597
1124
1984
Report
CWERReporter::HandleEvents - WER report upload completed with status 0x8
9/6/2012
21:10:28:597
1124
1984
Report
WER Report sent: 7.6.7600.256 0x80246008 A114A5E9-DB76-43EF-8430-0A556240C6E9 Download 101 Unmanaged
9/6/2012
21:10:28:597
1124
1984
Report
CWERReporter finishing event handling. (00000000)
9/6/2012
21:10:28:613
1124
1b70
AU
Successfully wrote event for AU health state:0
9/6/2012
21:10:28:613
1124
1b70
AU
>>## RESUMED ## AU: Download update [UpdateId = {41F7683B-E86D-4181-8A0E-D54B8072E290}]
9/6/2012
21:10:28:613
1124
1b70
AU
# WARNING: Download failed, error = 0x80246008
9/6/2012
21:10:28:613
1124
1b70
AU
Successfully wrote event for AU health state:0
9/6/2012
21:10:28:628
1124
1b70
AU
Currently showing Progress UX client - so not launching any other client
9/6/2012
21:10:28:644
1124
1b70
AU
Successfully wrote event for AU health state:0
9/6/2012
21:10:28:675
1124
1b70
AU
>>## RESUMED ## AU: Download update [UpdateId = {145FE545-BF00-427A-B87C-9C554830CE50}]
9/6/2012
21:10:28:675
1124
1b70
AU
# WARNING: Download failed, error = 0x80246008
9/6/2012
21:10:28:691
1124
1b70
AU
Successfully wrote event for AU health state:0
9/6/2012
21:10:28:691
1124
1b70
AU
Currently showing Progress UX client - so not launching any other client
9/6/2012
21:10:28:691
1124
1984
Report
CWERReporter finishing event handling. (00000000)
9/6/2012
21:10:28:738
1124
1b70
AU
Successfully wrote event for AU health state:0
9/6/2012
21:10:28:753
1124
1b70
AU
>>## RESUMED ## AU: Download update [UpdateId = {AFDCB546-0D0D-48E7-BD0C-EDAE3E15573D}]
9/6/2012
21:10:28:753
1124
1b70
AU
# WARNING: Download failed, error = 0x80246008
9/6/2012
21:10:28:769
1124
1b70
AU
Successfully wrote event for AU health state:0
9/6/2012
21:10:28:769
1124
1b70
AU
Currently showing Progress UX client - so not launching any other client
9/6/2012
21:10:28:800
1124
1b70
AU
Successfully wrote event for AU health state:0
9/6/2012
21:10:28:816
1124
1b70
AU
>>## RESUMED ## AU: Download update [UpdateId = {BCBB3F8F-80B6-4B04-84B5-4D28B1E5DCC6}]
9/6/2012
21:10:28:816
1124
1b70
AU
# WARNING: Download failed, error = 0x80246008
9/6/2012
21:10:28:816
1124
1b70
AU
Successfully wrote event for AU health state:0
9/6/2012
21:10:28:816
1124
1b70
AU
Currently showing Progress UX client - so not launching any other client
9/6/2012
21:10:28:847
1124
1b70
AU
Successfully wrote event for AU health state:0
9/6/2012
21:10:28:894
1124
1b70
AU
>>## RESUMED ## AU: Download update [UpdateId = {FA090999-3B89-4DD1-82B2-6E16B0841E24}]
9/6/2012
21:10:28:894
1124
1b70
AU
# WARNING: Download failed, error = 0x80246008
9/6/2012
21:10:28:909
1124
1b70
AU
Successfully wrote event for AU health state:0
9/6/2012
21:10:28:909
1124
1b70
AU
Currently showing Progress UX client - so not launching any other client
9/6/2012
21:10:28:925
1124
1b70
AU
Successfully wrote event for AU health state:0
9/6/2012
21:10:28:956
1124
1b70
AU
>>## RESUMED ## AU: Download update [UpdateId = {1A56B5AF-C1B0-4D82-BF13-296BAB975FA5}]
9/6/2012
21:10:28:956
1124
1b70
AU
# WARNING: Download failed, error = 0x80246008
9/6/2012
21:10:28:956
1124
1b70
AU
Successfully wrote event for AU health state:0
9/6/2012
21:10:28:972
1124
1b70
AU
Currently showing Progress UX client - so not launching any other client
9/6/2012
21:10:29:018
1124
1b70
AU
Successfully wrote event for AU health state:0
9/6/2012
21:10:29:050
1124
1b70
AU
>>## RESUMED ## AU: Download update [UpdateId = {5F64A8C3-B42C-48F7-9925-0429E9C548D2}]
9/6/2012
21:10:29:050
1124
1b70
AU
# WARNING: Download failed, error = 0x80246008
9/6/2012
21:10:29:065
1124
1b70
AU
Successfully wrote event for AU health state:0
9/6/2012
21:10:29:065
1124
1b70
AU
Currently showing Progress UX client - so not launching any other client
9/6/2012
21:10:29:065
1124
1984
Report
CWERReporter finishing event handling. (00000000)
9/6/2012
21:10:29:065
1124
1b70
AU
Successfully wrote event for AU health state:0
9/6/2012
21:10:29:112
1124
1b70
AU
>>## RESUMED ## AU: Download update [UpdateId = {6C35C3C6-E8A6-4C26-AD5A-2B12C6097919}]
9/6/2012
21:10:29:112
1124
1b70
AU
# WARNING: Download failed, error = 0x80246008
9/6/2012
21:10:29:128
1124
1b70
AU
Successfully wrote event for AU health state:0
9/6/2012
21:10:29:128
1124
1b70
AU
Currently showing Progress UX client - so not launching any other client
9/6/2012
21:10:29:143
1124
1b70
AU
Successfully wrote event for AU health state:0
9/6/2012
21:10:29:174
1124
1b70
AU
>>## RESUMED ## AU: Download update [UpdateId = {024F10D4-B471-422D-B393-39456CBA18D8}]
9/6/2012
21:10:29:174
1124
1b70
AU
# WARNING: Download failed, error = 0x80246008
9/6/2012
21:10:29:190
1124
1b70
AU
Successfully wrote event for AU health state:0
9/6/2012
21:10:29:190
1124
1b70
AU
Currently showing Progress UX client - so not launching any other client
9/6/2012
21:10:29:190
1124
1b70
AU
Successfully wrote event for AU health state:0
9/6/2012
21:10:29:206
1124
1b70
AU
>>## RESUMED ## AU: Download update [UpdateId = {A114A5E9-DB76-43EF-8430-0A556240C6E9}]
9/6/2012
21:10:29:206
1124
1b70
AU
# WARNING: Download failed, error = 0x80246008
9/6/2012
21:10:29:206
1124
1b70
AU
AU checked download status and it changed: Downloading is paused
9/6/2012
21:10:29:206
1124
1b70
AU
Successfully wrote event for AU health state:0
9/6/2012
21:10:29:206
1124
1b70
AU
Currently showing Progress UX client - so not launching any other client
9/6/2012
21:10:29:221
1124
1b70
AU
Successfully wrote event for AU health state:0
9/6/2012
21:10:30:173
1124
478
AU
BeginInteractiveInstall invoked for Install
9/6/2012
21:10:30:173
1124
478
AU
Auto-approved 0 update(s) for install (for Ux), installType=0
9/6/2012
21:10:30:173
1124
478
AU
WARNING: BeginInteractiveInstall failed, error = 0x8024000C
9/6/2012
21:10:30:641
1124
181c
AU
AU received handle event
9/6/2012
21:10:30:641
1124
181c
AU
No featured updates notifications to show
9/6/2012
21:10:30:641
1124
181c
AU
UpdateDownloadProperties: 1 download(s) are still in progress.
9/6/2012
21:10:30:641
1124
181c
AU
WARNING: Failed to change download properties of call, error = 0x80070057
9/6/2012
21:10:30:641
1124
181c
AU
Triggering Offline detection (non-interactive)
9/6/2012
21:10:30:641
1124
181c
AU
AU setting pending client directive to 'Install Complete Ux'
9/6/2012
21:10:30:641
1124
181c
AU
WARNING: Pending directive, 'Install Complete Ux', is not applicable
9/6/2012
21:10:30:641
1124
181c
AU
Successfully wrote event for AU health state:0
9/6/2012
21:10:30:641
1124
181c
AU
9/6/2012
21:10:30:641
1124
181c
AU
## START ## AU: Search for updates
9/6/2012
21:10:30:641
1124
181c
AU
9/6/2012
21:10:30:672
1124
181c
AU
<<## SUBMITTED ## AU: Search for updates [CallId = {20F11704-E4BA-4C5C-AEC5-50B82EF637A5}]
9/6/2012
21:10:30:672
1124
1984
Agent
9/6/2012
21:10:30:672
1124
1984
Agent
** START ** Agent: Finding updates [CallerId = AutomaticUpdates]
9/6/2012
21:10:30:672
1124
1984
Agent
9/6/2012
21:10:30:672
1124
1984
Agent
* Online = No; Ignore download priority = No
9/6/2012
21:10:30:672
1124
1984
Agent
* Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0 and
DeploymentAction='Uninstallation' and RebootRequired=1"
9/6/2012
21:10:30:672
1124
1984
Agent
* ServiceID = {7971F918-A847-4430-9279-4A52D1EFE18D} Third party service
9/6/2012
21:10:30:672
1124
1984
Agent
* Search Scope = {Machine}
9/6/2012
21:10:35:891
1124
181c
AU
No pending client directive
9/6/2012
21:10:40:984
1124
1984
Agent
WARNING: Failed to evaluate Installed rule, updateId = {818701AF-1182-45C2-BD1E-17068AD171D6}.101, hr = 80242013
9/6/2012
21:10:42:748
1124
1984
Agent
* Added update {1BDDBE8D-16EF-4E1D-A8EB-826691A014F6}.101 to search result
9/6/2012
21:10:42:748
1124
1984
Agent
* Added update {3F08EED3-8FC3-4253-8FA9-F301430C4B24}.101 to search result
9/6/2012
21:10:42:748
1124
1984
Agent
Update {7EBDB020-BD62-4790-AF2B-DFB52E42F91F}.104 is pruned out due to potential supersedence
9/6/2012
21:10:42:748
1124
1984
Agent
* Added update {D5FD720E-0F2C-4363-AA87-6AD4A6D11B0E}.105 to search result
9/6/2012
21:10:42:748
1124
1984
Agent
Update {E2B689E4-DF53-4FCF-BBA7-F4174F30D763}.105 is pruned out due to potential supersedence
9/6/2012
21:10:42:748
1124
1984
Agent
* Added update {FA090999-3B89-4DD1-82B2-6E16B0841E24}.107 to search result
9/6/2012
21:10:42:748
1124
1984
Agent
* Added update {BCBB3F8F-80B6-4B04-84B5-4D28B1E5DCC6}.107 to search result
9/6/2012
21:10:42:748
1124
1984
Agent
* Added update {6C35C3C6-E8A6-4C26-AD5A-2B12C6097919}.104 to search result
9/6/2012
21:10:42:748
1124
1984
Agent
Update {71F60E65-AC13-4EA3-8651-AE4E72188DB2}.100 is pruned out due to potential supersedence
9/6/2012
21:10:42:748
1124
1984
Agent
* Added update {41F7683B-E86D-4181-8A0E-D54B8072E290}.100 to search result
9/6/2012
21:10:42:748
1124
1984
Agent
* Added update {C7C2C625-E811-43B2-A6F6-29A86848B7BD}.100 to search result
9/6/2012
21:10:42:748
1124
1984
Agent
* Added update {AFDCB546-0D0D-48E7-BD0C-EDAE3E15573D}.101 to search result
9/6/2012
21:10:42:748
1124
1984
Agent
* Added update {145FE545-BF00-427A-B87C-9C554830CE50}.102 to search result
9/6/2012
21:10:42:749
1124
1984
Agent
* Added update {6252C914-64DF-49CE-8EBF-8CD3C6B3E0D9}.101 to search result
9/6/2012
21:10:42:749
1124
1984
Agent
* Added update {B4413613-7062-4F6B-A1E4-7A957409A51F}.101 to search result
9/6/2012
21:10:42:749
1124
1984
Agent
* Added update {A114A5E9-DB76-43EF-8430-0A556240C6E9}.100 to search result
9/6/2012
21:10:42:749
1124
1984
Agent
* Added update {024F10D4-B471-422D-B393-39456CBA18D8}.100 to search result
9/6/2012
21:10:42:749
1124
1984
Agent
* Added update {5F64A8C3-B42C-48F7-9925-0429E9C548D2}.100 to search result
9/6/2012
21:10:42:749
1124
1984
Agent
* Added update {CC0ADE33-EC3B-4D16-A281-338396F58DCB}.101 to search result
9/6/2012
21:10:42:749
1124
1984
Agent
* Added update {8FF20708-AEEF-4F79-B3C1-23905E105D41}.100 to search result
9/6/2012
21:10:42:749
1124
1984
Agent
* Added update {1A56B5AF-C1B0-4D82-BF13-296BAB975FA5}.101 to search result
9/6/2012
21:10:42:749
1124
1984
Agent
* Found 18 updates and 74 categories in search; evaluated appl. rules of 1103 out of 1964 deployed entities
9/6/2012
21:10:42:780
1124
1984
Agent
9/6/2012
21:10:42:780
1124
1984
Agent
** END ** Agent: Finding updates [CallerId = AutomaticUpdates]
9/6/2012
21:10:42:780
1124
1984
Agent
9/6/2012
21:10:42:807
1124
1b70
AU
>>## RESUMED ## AU: Search for updates [CallId = {20F11704-E4BA-4C5C-AEC5-50B82EF637A5}]
9/6/2012
21:10:42:807
1124
1984
Report
CWERReporter finishing event handling. (00000000)
9/6/2012
21:10:42:807
1124
1b70
AU
# 18 updates detected
9/6/2012
21:10:42:808
1124
1b70
AU
9/6/2012
21:10:42:808
1124
1b70
AU
## END ## AU: Search for updates [CallId = {20F11704-E4BA-4C5C-AEC5-50B82EF637A5}]
9/6/2012
21:10:42:808
1124
1b70
AU
9/6/2012
21:10:42:808
1124
1b70
AU
No featured updates notifications to show
9/6/2012
21:10:42:809
1124
1b70
AU
Successfully wrote event for AU health state:0
9/6/2012
21:10:42:812
1124
1b70
AU
Successfully wrote event for AU health state:0
9/6/2012
21:10:42:815
1124
18c0
AU
Getting featured update notifications. fIncludeDismissed = true
9/6/2012
21:10:42:815
1124
18c0
AU
No featured updates available.
9/6/2012
21:10:47:808
1124
1984
Report
CWERReporter finishing event handling. (00000000) -
Windows update error Code 80072EF3
Greetings!
I have a Dell PowerEdge T320 that is experiencing this issue: Windows update error Code 80072EF3
I followed instructions in article
http://support.microsoft.com/kb/947821/en-usand ran the DISM.exe with the offline source (my DVD drive) to avoid using the windows update component that appears to be damaged. Command completed, but no effect on the error.
Last successful update session was 7/8/2014
Security Update for Windows Server 2012 (KB2922229) cancelled. Tried to install manually. Not applicable.
Update for Windows Server 2012 (KB2811660) Failed. When running the manual download get the message it is already installed. Same for KB2855336
Any help appreciated.
Below is the detailed update history.
This link contains the log for the DISM repair tool:
https://www.dropbox.com/s/3aufjud0wd0n53n/CBS.zipHi,
Please re-run Windows update and then provide us the windowsupdate.log file for check. It is under C:\Windows.
Thanks.
Jeremy Wu
TechNet Community Support -
Windows 7 Backup "The System cannot find the path specified" - Error Code 0x80070003
I'm having severe problems backing up my own machine to a share on our
FILE-SERVER as \\FILE-SERVER\Backup\
I have already backed up another PC successfully using exactly the same settings I have used on my own PC. So I presume it is nothing to do with the
FILE-SERVER or the Backup settings. It has to be something to do with what I'm trying to backup from my machine.
First some background.
This exercise all began when the Windows Server 2008 r2
O/S fell over on one of our Servers. I tried reinstalling the O/S several times, without success. In the end I grabbed another drive and re-built the O/S. I then had problems promoting it to a Domain Controller on the network.
In the end I renamed the Server from FILESERVER
to FILE-SERVER.
We routinely share four folders on what is now
FILE-SERVER:
\\FILE-SERVER\Backup
- a Folder where backups from all other machines are written, so that they will be backed up with the Server
\\FILE-SERVER\Company
- holds all our Company data
\\FILE-SERVER\GEM
- this is the application folder for our own database
\\FILE-SERVER\Install
- holds all Install files for the software we use
These are all held on a RAID 1 Array that is separate from the System Disk that fell over.
Prior to the Server falling over, I had Backup working fine on my machine.
On my Notebook PC I had made these shared folders 'Available Offline', so that I still had everything available to me when I was out of the office. They were
of course shared as \\FILESERVER\... not \\FILE-SERVER\...
Having got the Server up and going again, I began to get the Backups from the Windows 7 Client PC's going again.
I started with a Desktop, which of course did not have any Offline Files.
That proved relatively straight-forward.
I then started with my machine. Initially I did not make the above shared folders 'Available Offline'. I set up my Backup using exactly the same settings that
had worked OK on the desktop machine. But when I ran the backup I got:
The System cannot find the path specified, Error Code 0x80070003
I tried all sorts of things to get it to work:
I restored the system to the earliest point possible,
I ran chkdsk,
I defragged the drive
All to no avail, so I tried backing up:
with and without a system image,
reducing the backup to a single folder,
a single Folder with only one .txt file in it,
making the Folders 'Available Offline' again.
Nothing made any difference.
In the end I looked in the Sync Center to look at the Offline Files Folder.
Under Mapped Network Drives I discovered I still had the Files and Folders from
\\FILESERVER. In their Shortcut Menu 'Always Available Offline' was greyed out. So I deleted the Offline Copies. This deleted the Files in the Folders but not the Folders.
Since I could find no way of deleting the old Mapped Network Drives, I decided I'd painted myself into a corner by renaming the Server.
So I bit the bullet and re-installed my Notebook too. This did get rid of the unwanted old Mapped Network Drives - BUT NOT THE ERROR!!
I’ve been through all the troubleshooting procedures in:
http://social.technet.microsoft.com/Forums/windows/en-US/629597bb-7be0-455c-b81e-a149472d3f9b/windows-7-backup-the-system-cannot-find-the-path-specified-error-0x80070003?forum=w7itprogeneral
Method 1
It had none of the symptoms reported in
http://support.microsoft.com/kb/973455
but I scanned for ‘reparse’ points anyway. Found several “Junction Points” but none that were “Mounted Volumes”, just ordinary ‘File Folders’.
Method 2
Check a drive for errors.
Looked at:
http://windows.microsoft.com/en-us/windows7/Check-a-drive-for-errors
Checked
both boxes. I closed machine down, to check for errors when it re-started.
It didn’t seem to find anything.
I say seem, because I did not actually see it finishing checking the empty space, but stages 1-4 found no problems and Windows 7 restarted normally.
It did detect 66 ‘Reparse’ Points, which is more than it found when I scanned for them earlier.
Method 3
Yes, I am an administrator or my own machine and, as such, I have ‘Full Access’.
I downloaded an ran the Process Monitor, filtering for Process Name “Wbengine.exe”, but did dot get a single event.
So I’m not sure what’s going on.
HELP - I'm out of ideas!
I have a WORD Document that documents all the Settings I've used on both the Server and the Clients, together with the reasoning behind those settings, but
I cannot find a way of uploading it.I am having the exact same problem with Windows 7 Professional. Out of the blue, this issue just started a few months ago when running my monthly Windows Backup where I have used a USB drive for the last 3 years, and never ever had this issue before. Most
of the solutions listed on the Microsoft websites and answers deal with
"Restore" functions, not the
"Backup" itself. I have 3 folders being skipped during the backup.
So I went and changed the Backup from "let Microsoft choose files, directories, etc" to "Let me choose". I included the files and folders that were being skipped, and ran the "Backup" again, and got the same error message,
but the files that were skipped the first time were "Backed up" finally. This issue is somehow related to my "Libraries"?
The 3 backup problems are:
Backup encountered a problem while backing up file C:\Windows\System32\config\systemprofile\My Audio Books\Audio Book Recordings. Error:(The system cannot find the path specified. (0x80070003))
Backup encountered a problem while backing up file C:\Windows\System32\config\systemprofile\My Audio Books\Audio Book CD Label-Cover Art. Error:(The system cannot find the path specified. (0x80070003))
Backup encountered a problem while backing up file C:\Windows\System32\config\systemprofile\My Audio Books\Audio Book MP3 Tag Art. Error:(The system cannot find the path specified. (0x80070003))
Did a "checkdisk" - no problems. Ran a program to fix registry - no problems. All updates up to date. I guess I could eliminate these folders from the Backup folders in the
Library, and just choose them under the "Users" locations, and be done with it. But I really want to understand this, and fix it. This is within Windows 7 and may be related to Windows Media Player or
some recent Windows update. Thanks. -
Hello,
I have installed Max DB 7.6.03.16 on AIX 5.3, however when trying to create a database I receive following message:
-24994 Runtime environment error (db_admin -f); 1, Check knldiag! Kernel exited with '0' before reaching ADMIN state (OS error code 11000)
I have reduced the CACHE_SIZE parameter to 800 and still receive the error.
Any suggestions?
Below is the knldiag and the ulimit for the user creating the database.
=============================================
Date Time TID Typ MsgID Label Message-Text
2008-08-27 14:32:49 2 12821 TASKING Thread 2 starting
2008-08-27 14:32:49 1 12600 VERSION 'Kernel 7.6.03 Build 015-123-173-107'
2008-08-27 14:32:49 1 12600 VERSION 'X64/AIX 7.6.03 Build 015-123-173-107'
2008-08-27 14:32:49 1 12769 INFO Starting SERVERDB: 'ARMDEMO'
2008-08-27 14:32:49 1 12770 INFO SERVERNODE: 'cscsvachb1app3'
2008-08-27 14:32:49 1 12773 INFO Date: 2008-08-27
2008-08-27 14:32:49 1 12771 INFO Process ID: 323762
2008-08-27 14:32:49 1 12772 INFO Owner: 'sdb'
2008-08-27 14:32:49 1 12772 INFO Group: 'sdba'
2008-08-27 14:32:49 1 12781 INFO Version: '64BIT Kernel'
2008-08-27 14:32:49 1 12781 INFO Version: 'X64/AIX 7.6.03 Build 015-123-173-107'
2008-08-27 14:32:49 1 12781 INFO Version: 'FAST'
2008-08-27 14:32:49 1 12806 INFO Machine: 'IBM RS 6000 (00CCE0FC4C00)'
2008-08-27 14:32:49 1 12775 INFO Processors: 4
2008-08-27 14:32:49 1 12780 INFO Current directory: '/var/opt/sdb/data/wrk/ARMDEMO'
2008-08-27 14:32:49 1 12780 INFO LIBPATH: '/opt/sdb/7603/lib/lib64:/opt/sdb/7603/sap'
2008-08-27 14:32:49 1 20233 RTE Dump of all kernel parameters start
2008-08-27 14:32:49 1 20206 RTE Using mode NORMAL for data volume 1
2008-08-27 14:32:49 1 20234 RTE ADMIN=1
2008-08-27 14:32:49 1 20234 RTE AKDUMP_ALLOWED=YES
2008-08-27 14:32:49 1 20234 RTE ALLOW_MULTIPLE_SERVERTASK_UKTS=NO
2008-08-27 14:32:49 1 20234 RTE AUTHENTICATION_ALLOW=
2008-08-27 14:32:49 1 20234 RTE AUTHENTICATION_DENY=
2008-08-27 14:32:49 1 20234 RTE AUTOSAVE=1
2008-08-27 14:32:49 1 20234 RTE AUTO_RECREATE_BAD_INDEXES=NO
2008-08-27 14:32:49 1 20234 RTE BACKUPRESULT=1
2008-08-27 14:32:49 1 20234 RTE BACKUP_BLOCK_CNT=64
2008-08-27 14:32:49 1 20234 RTE BACKUPHISTFILE=dbm.knl
2008-08-27 14:32:49 1 20234 RTE BACKUPMED_DEF=dbm.mdf
2008-08-27 14:32:49 1 20234 RTE CACHE_IN_SHARED_MEMORY=NO
2008-08-27 14:32:49 1 20234 RTE CACHE_SIZE=2500
2008-08-27 14:32:49 1 20234 RTE CALLSTACKLEVEL=0
2008-08-27 14:32:49 1 20234 RTE CATCACHE_MINSIZE=262144
2008-08-27 14:32:49 1 20234 RTE CAT_CACHE_SUPPLY=1344
2008-08-27 14:32:49 1 20234 RTE CHECKDATA=1
2008-08-27 14:32:49 1 20234 RTE CHECK_BACKUP=NO
2008-08-27 14:32:49 1 20234 RTE CHECK_COMMON=0
2008-08-27 14:32:49 1 20234 RTE CHECK_CONVERTER=0
2008-08-27 14:32:49 1 20234 RTE CHECK_DATACACHE=NO
2008-08-27 14:32:49 1 20234 RTE CHECK_DATAINDEX=0
2008-08-27 14:32:49 1 20234 RTE CHECK_DATAPAGELOG=0
2008-08-27 14:32:49 1 20234 RTE CHECK_FBM=0
2008-08-27 14:32:49 1 20234 RTE CHECK_HASHED_RESULTSET=0
2008-08-27 14:32:49 1 20234 RTE CHECK_IOMAN=0
2008-08-27 14:32:49 1 20234 RTE CHECK_KB_REGIONS=NO
2008-08-27 14:32:49 1 20234 RTE CHECK_LOCK_SUPPLY=NO
2008-08-27 14:32:49 1 20234 RTE CHECK_LOCK=NO
2008-08-27 14:32:49 1 20234 RTE CHECK_LOGHISTORY=0
2008-08-27 14:32:49 1 20234 RTE CHECK_LOGPAGE=0
2008-08-27 14:32:49 1 20234 RTE CHECK_LOGTRANS=0
2008-08-27 14:32:49 1 20234 RTE CHECK_LOGVOLUME=0
2008-08-27 14:32:49 1 20234 RTE CHECK_QUERYREWRITE=0
2008-08-27 14:32:49 1 20234 RTE CHECK_REGIONS=NO
2008-08-27 14:32:49 1 20234 RTE CHECK_SRVTASKS=0
2008-08-27 14:32:49 1 20234 RTE CHECK_TABLE_WIDTH=NO
2008-08-27 14:32:49 1 20234 RTE CHECK_TASK_SPECIFIC_CATALOGCACHE=NO
2008-08-27 14:32:49 1 20234 RTE CHECK_TRANSLIST=NO
2008-08-27 14:32:49 1 20234 RTE CHECK_TREE_LOCKS=NO
2008-08-27 14:32:49 1 20234 RTE CHECK_TREE=NO
2008-08-27 14:32:49 1 20234 RTE CLUSTERED_LOBS=NO
2008-08-27 14:32:49 1 20234 RTE CLUSTER_WRITE_THRESHOLD=80
2008-08-27 14:32:49 1 20234 RTE COLUMNCOMPRESSION=YES
2008-08-27 14:32:49 1 20234 RTE _COMMENT=
2008-08-27 14:32:49 1 20234 RTE CONTROLPASSWORD=***
2008-08-27 14:32:49 1 20234 RTE CONTROLUSERID=DBM
2008-08-27 14:32:49 1 20234 RTE CONVERTER_REGIONS=8
2008-08-27 14:32:49 1 20234 RTE DATABASEFULL=1
2008-08-27 14:32:49 1 20234 RTE DATACACHE_RGNS=8
2008-08-27 14:32:49 1 20234 RTE DATA_IO_BLOCK_COUNT=64
2008-08-27 14:32:49 1 20234 RTE DATA_VOLUME_GROUPS=1
2008-08-27 14:32:49 1 20234 RTE DATA_VOLUME_MODE_0001=NORMAL
2008-08-27 14:32:49 1 20234 RTE DATA_VOLUME_NAME_0001=/dev/dat_001
2008-08-27 14:32:49 1 20234 RTE DATA_VOLUME_SIZE_0001=100000
2008-08-27 14:32:49 1 20234 RTE DATA_VOLUME_TYPE_0001=R
2008-08-27 14:32:49 1 20234 RTE DATE_TIME_FORMAT=INTERNAL
2008-08-27 14:32:49 1 20234 RTE DBFILLINGABOVELIMIT=70L80M85M90H95H96H97H98H99H
2008-08-27 14:32:49 1 20234 RTE DBFILLINGBELOWLIMIT=70L80L85L90L95L
2008-08-27 14:32:49 1 20234 RTE DDLTRIGGER=YES
2008-08-27 14:32:49 1 20234 RTE DEADLOCK_DETECTION=4
2008-08-27 14:32:49 1 20234 RTE DEFAULT_CODE=ASCII
2008-08-27 14:32:49 1 20234 RTE DELAYCOMMIT=NO
2008-08-27 14:32:49 1 20234 RTE DELAYLOGWRITER=0
2008-08-27 14:32:49 1 20234 RTE DIAG_HISTORY_NUM=2
2008-08-27 14:32:49 1 20234 RTE DIAG_HISTORY_PATH=/var/opt/sdb/data/wrk/ARMDEMO/DIAGHISTORY
2008-08-27 14:32:49 1 20234 RTE DIAGSEM=0
2008-08-27 14:32:49 1 20234 RTE DWIO_AREA_FLUSH=50
2008-08-27 14:32:49 1 20234 RTE DWIO_AREA_SIZE=50
2008-08-27 14:32:49 1 20234 RTE DWLRU_TAIL_FLUSH=25
2008-08-27 14:32:49 1 20234 RTE DYNTASK_STACK=NO
2008-08-27 14:32:49 1 20234 RTE ENABLE_CHECK_INSTANCE=YES
2008-08-27 14:32:49 1 20234 RTE ENABLE_SYSTEM_TRIGGERS=YES
2008-08-27 14:32:49 1 20234 RTE ERROR=3
2008-08-27 14:32:49 1 20234 RTE _EVENTFILE=knldiag.evt
2008-08-27 14:32:49 1 20234 RTE _EVENTSIZE=0
2008-08-27 14:32:49 1 20234 RTE EVENT=1
2008-08-27 14:32:49 1 20234 RTE EXPAND_COM_TRACE=NO
2008-08-27 14:32:49 1 20234 RTE EXTERNAL_DUMP_REQUEST=NO
2008-08-27 14:32:49 1 20234 RTE FBMLOW_IO_RATE=10
2008-08-27 14:32:49 1 20234 RTE FBM_VOLUME_BALANCE=10
2008-08-27 14:32:49 1 20234 RTE FBM_VOLUME_COMPRESSION=50
2008-08-27 14:32:49 1 20234 RTE FILEDIR_SPINLOCKPOOL_SIZE=10
2008-08-27 14:32:49 1 20234 RTE FORBID_LOAD_BALANCING=YES
2008-08-27 14:32:49 1 20234 RTE FORMATTING_MODE=PARALLEL
2008-08-27 14:32:49 1 20234 RTE FORMAT_DATAVOLUME=YES
2008-08-27 14:32:49 1 20234 RTE HASHED_RESULTSET_CACHESIZE=262144
2008-08-27 14:32:49 1 20234 RTE HASHED_RESULTSET=YES
2008-08-27 14:32:49 1 20234 RTE HEAP_CHECK_LEVEL=0
2008-08-27 14:32:49 1 20234 RTE HS_STORAGE_DLL=libhsscopy
2008-08-27 14:32:49 1 20234 RTE HS_SYNC_INTERVAL=50
2008-08-27 14:32:49 1 20234 RTE IDXFILELIST_SIZE=0
2008-08-27 14:32:49 1 20234 RTE INDEX_LEAF_CACHING=2
2008-08-27 14:32:49 1 20234 RTE INIT_ALLOCATORSIZE=262144
2008-08-27 14:32:49 1 20234 RTE INSTANCE_TYPE=OLTP
2008-08-27 14:32:49 1 20234 RTE IOPROCSFOR_PRIO=0
2008-08-27 14:32:49 1 20234 RTE IOPROCSFOR_READER=0
2008-08-27 14:32:49 1 20234 RTE IOPROCSPER_DEV=2
2008-08-27 14:32:49 1 20234 RTE IOPROCSSWITCH=2
2008-08-27 14:32:49 1 20234 RTE JOIN_MAXTAB_LEVEL4=16
2008-08-27 14:32:49 1 20234 RTE JOIN_MAXTAB_LEVEL9=5
2008-08-27 14:32:49 1 20234 RTE JOIN_SEARCH_LEVEL=0
2008-08-27 14:32:49 1 20234 RTE JOIN_TABLEBUFFER=128
2008-08-27 14:32:49 1 20234 RTE _KERNELDIAGFILE=knldiag
2008-08-27 14:32:49 1 20234 RTE KERNELDIAGSIZE=800
2008-08-27 14:32:49 1 20234 RTE _KERNELDUMPFILE=knldump
2008-08-27 14:32:49 1 20234 RTE _KERNELTRACEFILE=knltrace
2008-08-27 14:32:49 1 20234 RTE KERNELTRACESIZE=1099
2008-08-27 14:32:49 1 20234 RTE KERNELVERSION=KERNEL 7.6.03 BUILD 015-123-173-107
2008-08-27 14:32:49 1 20234 RTE LOAD_BALANCING_CHK=0
2008-08-27 14:32:49 1 20234 RTE LOAD_BALANCING_DIF=10
2008-08-27 14:32:49 1 20234 RTE LOAD_BALANCING_EQ=5
2008-08-27 14:32:49 1 20234 RTE LOCAL_REDO_LOG_BUFFER_SIZE=0
2008-08-27 14:32:49 1 20234 RTE LOCKSUPPLY_BLOCK=100
2008-08-27 14:32:49 1 20234 RTE LOGABOVELIMIT=50L75L90M95M96H97H98H99H
2008-08-27 14:32:49 1 20234 RTE LOGFULL=1
2008-08-27 14:32:49 1 20234 RTE LOGSEGMENTFULL=1
2008-08-27 14:32:49 1 20234 RTE LOG_BACKUP_TO_PIPE=NO
2008-08-27 14:32:49 1 20234 RTE LOG_IO_BLOCK_COUNT=8
2008-08-27 14:32:49 1 20234 RTE LOG_IO_QUEUE=50
2008-08-27 14:32:49 1 20234 RTE LOG_MIRRORED=NO
2008-08-27 14:32:49 1 20234 RTE LOG_QUEUE_COUNT=1
2008-08-27 14:32:49 1 20234 RTE LOG_SEGMENT_SIZE=2133
2008-08-27 14:32:49 1 20234 RTE LOG_VOLUME_NAME_001=/dev/log_001
2008-08-27 14:32:49 1 20234 RTE LOG_VOLUME_SIZE_001=8000
2008-08-27 14:32:49 1 20234 RTE LOG_VOLUME_TYPE_001=R
2008-08-27 14:32:49 1 20234 RTE LRU_FOR_SCAN=NO
2008-08-27 14:32:49 1 20234 RTE MAXBACKUPDEVS=2
2008-08-27 14:32:49 1 20234 RTE MAXCPU=1
2008-08-27 14:32:49 1 20234 RTE MAXDATAVOLUMES=64
2008-08-27 14:32:49 1 20234 RTE _MAXEVENTS=100
2008-08-27 14:32:49 1 20234 RTE _MAXEVENTTASKS=2
2008-08-27 14:32:49 1 20234 RTE MAXGARBAGECOLL=1
2008-08-27 14:32:49 1 20234 RTE MAXLOCKS=2500
2008-08-27 14:32:49 1 20234 RTE MAXLOGVOLUMES=2
2008-08-27 14:32:49 1 20234 RTE MAXPAGER=64
2008-08-27 14:32:49 1 20234 RTE MAXRGN_REQUEST=-1
2008-08-27 14:32:49 1 20234 RTE MAXSERVERTASKS=134
2008-08-27 14:32:49 1 20234 RTE MAXTASKSTACK=1024
2008-08-27 14:32:49 1 20234 RTE _MAXTRANS=168
2008-08-27 14:32:49 1 20234 RTE MAXUSERTASKS=20
2008-08-27 14:32:49 1 20234 RTE MAXVOLUMES=67
2008-08-27 14:32:49 1 20234 RTE MAX_HASHTABLE_MEMORY=5120
2008-08-27 14:32:49 1 20234 RTE MAX_LOG_QUEUE_COUNT=0
2008-08-27 14:32:49 1 20234 RTE MAXMESSAGE_FILES=0
2008-08-27 14:32:49 1 20234 RTE MAX_MESSAGE_LIST_LENGTH=100
2008-08-27 14:32:49 1 20234 RTE MAX_RETENTION_TIME=480
2008-08-27 14:32:49 1 20234 RTE MAX_SERVERTASK_STACK=500
2008-08-27 14:32:49 1 20234 RTE MAX_SINGLE_HASHTABLE_SIZE=512
2008-08-27 14:32:49 1 20234 RTE MAX_SPECIALTASK_STACK=500
2008-08-27 14:32:49 1 20234 RTE MBLOCKDATA_SIZE=32768
2008-08-27 14:32:49 1 20234 RTE MBLOCKQUAL_SIZE=32768
2008-08-27 14:32:49 1 20234 RTE MBLOCKSTACK_SIZE=32768
2008-08-27 14:32:49 1 20234 RTE MBLOCKSTRAT_SIZE=16384
2008-08-27 14:32:49 1 20234 RTE MCOD=NO
2008-08-27 14:32:49 1 20234 RTE MEMORY_ALLOCATION_LIMIT=0
2008-08-27 14:32:49 1 20234 RTE MINREPLYSIZE=4096
2008-08-27 14:32:49 1 20234 RTE MINSERVERTASKS=134
2008-08-27 14:32:49 1 20234 RTE MIN_RETENTION_TIME=60
2008-08-27 14:32:49 1 20234 RTE MONITOR_READ=2147483647
2008-08-27 14:32:49 1 20234 RTE MONITOR_ROWNO=0
2008-08-27 14:32:49 1 20234 RTE MONITOR_SELECTIVITY=0
2008-08-27 14:32:49 1 20234 RTE MONITOR_TIME=2147483647
2008-08-27 14:32:49 1 20234 RTE MPDISP_LOOPS=2
2008-08-27 14:32:49 1 20234 RTE MPDISP_PRIO=DEFAULT
2008-08-27 14:32:49 1 20234 RTE MPRGN_BUSY_WAIT=DEFAULT
2008-08-27 14:32:49 1 20234 RTE MPRGN_DIRTY_READ=DEFAULT
2008-08-27 14:32:49 1 20234 RTE MP_RGN_LOOP=-1
2008-08-27 14:32:49 1 20234 RTE MPRGN_PRIO=DEFAULT
2008-08-27 14:32:49 1 20234 RTE MPRGN_QUEUE=YES
2008-08-27 14:32:49 1 20234 RTE NO_SYNC_TO_DISK_WANTED=NO
2008-08-27 14:32:49 1 20234 RTE OFFICIAL_NODE=
2008-08-27 14:32:49 1 20234 RTE OMS_HEAP_BLOCKSIZE=10000
2008-08-27 14:32:49 1 20234 RTE OMS_HEAP_COUNT=1
2008-08-27 14:32:49 1 20234 RTE OMS_HEAP_LIMIT=0
2008-08-27 14:32:49 1 20234 RTE OMS_HEAP_THRESHOLD=100
2008-08-27 14:32:49 1 20234 RTE OMSREGIONS=0
2008-08-27 14:32:49 1 20234 RTE OMSRGNS=7
2008-08-27 14:32:49 1 20234 RTE OMS_RUN_IN_UDE_SERVER=NO
2008-08-27 14:32:49 1 20234 RTE OMS_STREAM_TIMEOUT=30
2008-08-27 14:32:49 1 20234 RTE OMS_VERS_THRESHOLD=2097152
2008-08-27 14:32:49 1 20234 RTE ONLINE=1
2008-08-27 14:32:49 1 20234 RTE OPMSG1=/dev/console
2008-08-27 14:32:49 1 20234 RTE OPMSG2=/dev/null
2008-08-27 14:32:49 1 20234 RTE OPTIMIZE_AGGREGATION=YES
2008-08-27 14:32:49 1 20234 RTE OPTIMIZE_FETCH_REVERSE=YES
2008-08-27 14:32:49 1 20234 RTE OPTIMIZE_FIRST_ROWS=YES
2008-08-27 14:32:49 1 20234 RTE OPTIMIZE_JOIN_HASHTABLE=YES
2008-08-27 14:32:49 1 20234 RTE OPTIMIZE_JOIN_HASH_MINIMAL_RATIO=1
2008-08-27 14:32:49 1 20234 RTE OPTIMIZE_JOIN_ONEPHASE=YES
2008-08-27 14:32:49 1 20234 RTE OPTIMIZE_JOIN_OPERATOR_SORT=YES
2008-08-27 14:32:49 1 20234 RTE OPTIMIZE_JOIN_OUTER=YES
2008-08-27 14:32:49 1 20234 RTE OPTIMIZE_JOIN_PARALLEL_MINSIZE=1000000
2008-08-27 14:32:49 1 20234 RTE OPTIMIZE_JOIN_PARALLEL_SERVERS=0
2008-08-27 14:32:49 1 20234 RTE OPTIMIZE_MIN_MAX=YES
2008-08-27 14:32:49 1 20234 RTE OPTIMIZE_OPERATOR_JOIN_COSTFUNC=YES
2008-08-27 14:32:49 1 20234 RTE OPTIMIZE_OPERATOR_JOIN=YES
2008-08-27 14:32:49 1 20234 RTE OPTIMIZE_QUAL_ON_INDEX=YES
2008-08-27 14:32:49 1 20234 RTE OPTIMIZE_QUERYREWRITE=OPERATOR
2008-08-27 14:32:49 1 20234 RTE OPTIMIZE_STAR_JOIN=YES
2008-08-27 14:32:49 1 20234 RTE OPTIM_CACHE=NO
2008-08-27 14:32:49 1 20234 RTE OPTIM_INV_ONLY=YES
2008-08-27 14:32:49 1 20234 RTE OPTIM_JOIN_FETCH=0
2008-08-27 14:32:49 1 20234 RTE OPTIM_MAX_MERGE=500
2008-08-27 14:32:49 1 20234 RTE OUTOFSESSIONS=3
2008-08-27 14:32:49 1 20234 RTE PACKETSIZE=131072
2008-08-27 14:32:49 1 20234 RTE PAGESIZE=8192
2008-08-27 14:32:49 1 20234 RTE PREALLOCATE_IOWORKER=NO
2008-08-27 14:32:49 1 20234 RTE PRIOBASE_COM=10
2008-08-27 14:32:49 1 20234 RTE PRIOBASE_IOC=80
2008-08-27 14:32:49 1 20234 RTE PRIOBASE_RAV=80
2008-08-27 14:32:49 1 20234 RTE PRIOBASE_REX=40
2008-08-27 14:32:49 1 20234 RTE PRIOBASE_U2U=100
2008-08-27 14:32:49 1 20234 RTE PRIOFACTOR=80
2008-08-27 14:32:49 1 20234 RTE PROTECT_DATACACHE_MEMORY=NO
2008-08-27 14:32:49 1 20234 RTE READAHEADBLOBS=32
2008-08-27 14:32:49 1 20234 RTE REQUEST_TIMEOUT=5000
2008-08-27 14:32:49 1 20234 RTE RESERVEDSERVERTASKS=69
2008-08-27 14:32:49 1 20234 RTE RESTARTTIME=600
2008-08-27 14:32:49 1 20234 RTE ROW_LOCKS_PER_TRANSACTION=50
2008-08-27 14:32:49 1 20234 RTE ROWRGNS=8
2008-08-27 14:32:49 1 20234 RTE _RTEDUMPFILE=rtedump
2008-08-27 14:32:49 1 20234 RTE RTE_TEST_REGIONS=0
2008-08-27 14:32:49 1 20234 RTE RUNDIRECTORY=/var/opt/sdb/data/wrk/ARMDEMO
2008-08-27 14:32:49 1 20234 RTE SEQUENCE_CACHE=1
2008-08-27 14:32:49 1 20234 RTE SERVERDBFOR_SAP=YES
2008-08-27 14:32:49 1 20234 RTE SESSION_TIMEOUT=900
2008-08-27 14:32:49 1 20234 RTE SET_VOLUME_LOCK=YES
2008-08-27 14:32:49 1 20234 RTE SHAREDSQL_CLEANUPTHRESHOLD=25
2008-08-27 14:32:49 1 20234 RTE SHAREDSQL_COMMANDCACHESIZE=262144
2008-08-27 14:32:49 1 20234 RTE SHAREDSQL=YES
2008-08-27 14:32:49 1 20234 RTE _SHMKERNEL=10001
2008-08-27 14:32:49 1 20234 RTE SHOW_MAX_KB_STACK_USE=NO
2008-08-27 14:32:49 1 20234 RTE SHOW_MAX_STACK_USE=NO
2008-08-27 14:32:49 1 20234 RTE SIMULATE_VECTORIO=NEVER
2008-08-27 14:32:49 1 20234 RTE SPINLOCK_BACKOFF_BASE=1
2008-08-27 14:32:49 1 20234 RTE SPINLOCK_BACKOFF_FACTOR=2
2008-08-27 14:32:49 1 20234 RTE SPINLOCK_BACKOFF_MAXIMUM=64
2008-08-27 14:32:49 1 20234 RTE SPINLOCK_LOOP_COUNT=30000
2008-08-27 14:32:49 1 20234 RTE STANDBY=1
2008-08-27 14:32:49 1 20234 RTE SUBTREE_LOCKS=NO
2008-08-27 14:32:49 1 20234 RTE SUPPRESS_CORE=YES
2008-08-27 14:32:49 1 20234 RTE SYMBOL_DEMANGLING=NO
2008-08-27 14:32:49 1 20234 RTE SYMBOL_RESOLUTION=YES
2008-08-27 14:32:49 1 20234 RTE SYSTEMERROR=3
2008-08-27 14:32:49 1 20234 RTE TABRGNS=8
2008-08-27 14:32:49 1 20234 RTE TASKCLUSTER01=tw;al;ut;2000sv,100bup;10ev,10gc;
2008-08-27 14:32:49 1 20234 RTE TASKCLUSTER02=ti,100dw;30000us;
2008-08-27 14:32:49 1 20234 RTE TASKCLUSTER03=compress
2008-08-27 14:32:49 1 20234 RTE TIME_MEASUREMENT=NO
2008-08-27 14:32:49 1 20234 RTE TRACE_AK=NO
2008-08-27 14:32:49 1 20234 RTE TRACE_ALLOCATOR=0
2008-08-27 14:32:49 1 20234 RTE TRACE_CATALOG=0
2008-08-27 14:32:49 1 20234 RTE TRACE_CLIENTKERNELCOM=0
2008-08-27 14:32:49 1 20234 RTE TRACE_COMMON=0
2008-08-27 14:32:49 1 20234 RTE TRACE_COMMUNICATION=0
2008-08-27 14:32:49 1 20234 RTE TRACE_CONVERTER=0
2008-08-27 14:32:49 1 20234 RTE TRACE_DATACACHE=0
2008-08-27 14:32:49 1 20234 RTE TRACE_DATACHAIN=0
2008-08-27 14:32:49 1 20234 RTE TRACE_DATAINDEX=0
2008-08-27 14:32:49 1 20234 RTE TRACE_DATAPAM=0
2008-08-27 14:32:49 1 20234 RTE TRACE_DATATREE=0
2008-08-27 14:32:49 1 20234 RTE TRACE_DBPROC=0
2008-08-27 14:32:49 1 20234 RTE TRACE_DEFAULT=NO
2008-08-27 14:32:49 1 20234 RTE TRACE_DELETE=NO
2008-08-27 14:32:49 1 20234 RTE TRACE_FBM=0
2008-08-27 14:32:49 1 20234 RTE TRACE_FILEDIR=0
2008-08-27 14:32:49 1 20234 RTE TRACE_FRAMECTRL=0
2008-08-27 14:32:49 1 20234 RTE TRACE_INDEX=NO
2008-08-27 14:32:49 1 20234 RTE TRACE_INSERT=NO
2008-08-27 14:32:49 1 20234 RTE TRACE_IOMAN=0
2008-08-27 14:32:49 1 20234 RTE TRACE_IPC=0
2008-08-27 14:32:49 1 20234 RTE TRACE_JOIN=0
2008-08-27 14:32:49 1 20234 RTE TRACE_KSQL=0
2008-08-27 14:32:49 1 20234 RTE TRACE_LOCK=NO
2008-08-27 14:32:49 1 20234 RTE TRACE_LOGACTION=0
2008-08-27 14:32:49 1 20234 RTE TRACE_LOGHISTORY=0
2008-08-27 14:32:49 1 20234 RTE TRACE_LOGPAGE=0
2008-08-27 14:32:49 1 20234 RTE TRACE_LOGTRANS=0
2008-08-27 14:32:49 1 20234 RTE TRACE_LOGVOLUME=0
2008-08-27 14:32:49 1 20234 RTE TRACE_LONG=NO
2008-08-27 14:32:49 1 20234 RTE TRACE_MEMORY=0
2008-08-27 14:32:49 1 20234 RTE TRACE_MESSAGES=0
2008-08-27 14:32:49 1 20234 RTE TRACE_OBJECTCONTAINER=0
2008-08-27 14:32:49 1 20234 RTE TRACE_OBJECT_ADD=NO
2008-08-27 14:32:49 1 20234 RTE TRACE_OBJECT_ALTER=NO
2008-08-27 14:32:49 1 20234 RTE TRACE_OBJECT_FREE=NO
2008-08-27 14:32:49 1 20234 RTE TRACE_OBJECT_GET=NO
2008-08-27 14:32:49 1 20234 RTE TRACE_OBJECT=NO
2008-08-27 14:32:49 1 20234 RTE TRACE_OMS_CONTAINERDIR=0
2008-08-27 14:32:49 1 20234 RTE TRACE_OMS_CONTEXT=0
2008-08-27 14:32:49 1 20234 RTE TRACE_OMS_ERROR=0
2008-08-27 14:32:49 1 20234 RTE TRACE_OMS_FLUSHCACHE=0
2008-08-27 14:32:49 1 20234 RTE TRACE_OMS_INTERFACE=0
2008-08-27 14:32:49 1 20234 RTE TRACE_OMS_KEYRANGE=0
2008-08-27 14:32:49 1 20234 RTE TRACE_OMS_KEY=0
2008-08-27 14:32:49 1 20234 RTE TRACE_OMS_LOCK=0
2008-08-27 14:32:49 1 20234 RTE TRACE_OMS_MEMORY=0
2008-08-27 14:32:49 1 20234 RTE TRACE_OMS_NEWOBJ=0
2008-08-27 14:32:49 1 20234 RTE TRACE_OMS_SESSION=0
2008-08-27 14:32:49 1 20234 RTE TRACE_OMS_STREAM=0
2008-08-27 14:32:49 1 20234 RTE TRACE_OMS_VAROBJECT=0
2008-08-27 14:32:49 1 20234 RTE TRACE_OMS_VERSION=0
2008-08-27 14:32:49 1 20234 RTE TRACE_OPTIMIZE=NO
2008-08-27 14:32:49 1 20234 RTE TRACE_ORDER_STANDARD=NO
2008-08-27 14:32:49 1 20234 RTE TRACE_ORDER=NO
2008-08-27 14:32:49 1 20234 RTE TRACE_PAGER=0
2008-08-27 14:32:49 1 20234 RTE TRACE_PAGES_BUP=0
2008-08-27 14:32:49 1 20234 RTE TRACE_PAGES_EV=2
2008-08-27 14:32:49 1 20234 RTE TRACE_PAGES_GC=20
2008-08-27 14:32:49 1 20234 RTE TRACE_PAGES_LW=5
2008-08-27 14:32:49 1 20234 RTE TRACE_PAGES_PG=3
2008-08-27 14:32:49 1 20234 RTE TRACE_PAGES_SV=5
2008-08-27 14:32:49 1 20234 RTE TRACE_PAGES_TI=2
2008-08-27 14:32:49 1 20234 RTE TRACE_PAGES_US=10
2008-08-27 14:32:49 1 20234 RTE TRACE_PAGES_UT=5
2008-08-27 14:32:49 1 20234 RTE TRACE_PAGES=NO
2008-08-27 14:32:49 1 20234 RTE TRACE_PRIMARY_TREE=NO
2008-08-27 14:32:49 1 20234 RTE TRACE_QUERYREWRITE=0
2008-08-27 14:32:49 1 20234 RTE TRACE_RUNTIME=0
2008-08-27 14:32:49 1 20234 RTE TRACE_SELECT=NO
2008-08-27 14:32:49 1 20234 RTE TRACE_SHAREDSQL=0
2008-08-27 14:32:49 1 20234 RTE TRACE_SQLMANAGER=0
2008-08-27 14:32:49 1 20234 RTE TRACE_SRVTASKS=0
2008-08-27 14:32:49 1 20234 RTE TRACE_STOP_ERRORCODE=0
2008-08-27 14:32:49 1 20234 RTE TRACE_SYNCHRONISATION=0
2008-08-27 14:32:49 1 20234 RTE TRACE_SYSVIEW=0
2008-08-27 14:32:49 1 20234 RTE TRACE_TABLE=0
2008-08-27 14:32:49 1 20234 RTE TRACE_TIME=NO
2008-08-27 14:32:49 1 20234 RTE TRACE_UPDATE=NO
2008-08-27 14:32:49 1 20234 RTE TRACE_VOLUME=0
2008-08-27 14:32:49 1 20234 RTE TRANS_HISTORY_SIZE=0
2008-08-27 14:32:49 1 20234 RTE TRANSRGNS=8
2008-08-27 14:32:49 1 20234 RTE TRANS_THRESHOLD_VALUE=60
2008-08-27 14:32:49 1 20234 RTE _UNICODE=YES
2008-08-27 14:32:49 1 20234 RTE UPDATESTAT_PARALLEL_SERVERS=0
2008-08-27 14:32:49 1 20234 RTE UPDATESTAT_SAMPLE_ALGO=1
2008-08-27 14:32:49 1 20234 RTE UPDSTATWANTED=1
2008-08-27 14:32:49 1 20234 RTE USED_MAX_LOG_QUEUE_COUNT=1
2008-08-27 14:32:49 1 20234 RTE USESELECTFETCH=YES
2008-08-27 14:32:49 1 20234 RTE USEUNICODECOLUMNCOMPRESSION=NO
2008-08-27 14:32:49 1 20234 RTE USEVARIABLEINPUT=NO
2008-08-27 14:32:49 1 20234 RTE USE_COROUTINES=YES
2008-08-27 14:32:49 1 20234 RTE USEIOPROCS_ONLY=NO
2008-08-27 14:32:49 1 20234 RTE USE_OPEN_DIRECT_FOR_BACKUP=NO
2008-08-27 14:32:49 1 20234 RTE USE_OPEN_DIRECT=NO
2008-08-27 14:32:49 1 20234 RTE USE_SYSTEM_PAGE_CACHE=YES
2008-08-27 14:32:49 1 20234 RTE UTILITYPROTFILE=dbm.utl
2008-08-27 14:32:49 1 20234 RTE UTILITY_PROTSIZE=100
2008-08-27 14:32:49 1 20234 RTE VOLUMENO_BIT_COUNT=8
2008-08-27 14:32:49 1 20234 RTE WORKDATASIZE=8192
2008-08-27 14:32:49 1 20234 RTE WORKSTACKSIZE=8192
2008-08-27 14:32:49 1 20234 RTE XP_CONVERTER_REGIONS=0
2008-08-27 14:32:49 1 20234 RTE XP_DATA_CACHE_RGNS=0
2008-08-27 14:32:49 1 20234 RTE XP_MAXPAGER=0
2008-08-27 14:32:49 1 20235 RTE Dump of all kernel parameters done
2008-08-27 14:32:50 1 12770 INFO SERVERNODE: 'cscsvachb1app3'
2008-08-27 14:32:50 1 12932 INFO maximum cpu time: unlimited
2008-08-27 14:32:50 1 12891 INFO maximum core size: 1023 MB
2008-08-27 14:32:50 1 12892 INFO maximum number of open files: 2000
2008-08-27 14:32:50 1 12934 INFO maximum file size: 1023 MB
2008-08-27 14:32:50 1 12895 INFO maximum number of threads: 32767
2008-08-27 14:32:50 1 12935 INFO maximum stack size: 32 MB
2008-08-27 14:32:50 1 12893 INFO maximum virtual memory size: unlimited
2008-08-27 14:32:50 1 12937 INFO resident set size size: 32 MB
2008-08-27 14:32:50 1 12894 INFO maximum heap size: 128 MB
2008-08-27 14:32:50 1 12898 ENVIRON Environment dump start
2008-08-27 14:32:50 1 12898 ENVIRON AUTHSTATE=compat
2008-08-27 14:32:50 1 12898 ENVIRON A__z=! LOGNAME
2008-08-27 14:32:50 1 12898 ENVIRON DBROOT=/opt/sdb/7603
2008-08-27 14:32:50 1 12898 ENVIRON EXTSHM=OFF
2008-08-27 14:32:50 1 12898 ENVIRON G_BROKEN_FILENAMES=1
2008-08-27 14:32:50 1 12898 ENVIRON HOME=/root
2008-08-27 14:32:50 1 12898 ENVIRON LANG=en_US
2008-08-27 14:32:50 1 12898 ENVIRON LC__FASTMSG=true
2008-08-27 14:32:50 1 12898 ENVIRON LIBPATH=/opt/sdb/7603/lib/lib64:/opt/sdb/7603/sap
2008-08-27 14:32:50 1 12898 ENVIRON LOCPATH=/usr/lib/nls/loc
2008-08-27 14:32:50 1 12898 ENVIRON LOGIN=root
2008-08-27 14:32:50 1 12898 ENVIRON LOGNAME=root
2008-08-27 14:32:50 1 12898 ENVIRON MAIL=/usr/spool/mail/root
2008-08-27 14:32:50 1 12898 ENVIRON MAILMSG=[YOU HAVE NEW MAIL]
2008-08-27 14:32:50 1 12898 ENVIRON ODMDIR=/etc/objrepos
2008-08-27 14:32:50 1 12898 ENVIRON PATH=/opt/sdb/7603/bin:/opt/sdb/programs/bin:/usr/bin:/etc:/usr/sbin:/usr/ucb:/usr/bin/X11:/sbin:/usr/java14/jre/b
2008-08-27 14:32:50 1 12898 ENVIRON in:/usr/java14/bin
2008-08-27 14:32:50 1 12898 ENVIRON PWD=/opt/sdb/programs/bin
2008-08-27 14:32:50 1 12898 ENVIRON SERVERDB=ARMDEMO
2008-08-27 14:32:50 1 12898 ENVIRON SHELL=/bin/ksh93
2008-08-27 14:32:50 1 12898 ENVIRON SSH_CLIENT=20.7.220.218 1835 22
2008-08-27 14:32:50 1 12898 ENVIRON SSH_CONNECTION=20.7.220.218 1835 20.7.220.21 22
2008-08-27 14:32:50 1 12898 ENVIRON SSH_TTY=/dev/pts/0
2008-08-27 14:32:50 1 12898 ENVIRON TERM=xterm
2008-08-27 14:32:50 1 12898 ENVIRON TZ=CST6CDT
2008-08-27 14:32:50 1 12898 ENVIRON USER=root
2008-08-27 14:32:50 1 12898 ENVIRON VISUAL=/usr/bin/vi
2008-08-27 14:32:50 1 12898 ENVIRON =./xserver
2008-08-27 14:32:50 1 12898 ENVIRON Environment dump completed
2008-08-27 14:32:50 1 12883 DBSTATE Core dump suppressed
2008-08-27 14:32:50 1 20219 RTE Memory allocation not limited
2008-08-27 14:32:50 1 20220 RTE System page cache usage enabled
2008-08-27 14:32:50 1 12927 TASKING Using coroutines for tasks
2008-08-27 14:32:50 1 12927 TASKING Using ucontext_t for coroutine context
2008-08-27 14:32:50 1 12692 TCLUSTER tw;al;ut;2000sv,100bup;10ev,10gc;ti,100dw;30000us;compress
2008-08-27 14:32:50 1 12693 TCLUSTER number of 'BUP': 0
2008-08-27 14:32:50 1 12693 TCLUSTER number of ' DW': 64
2008-08-27 14:32:50 1 12693 TCLUSTER number of ' US': 20
2008-08-27 14:32:50 1 12693 TCLUSTER number of ' SV': 134
2008-08-27 14:32:50 1 12693 TCLUSTER number of ' EV': 2
2008-08-27 14:32:50 1 12693 TCLUSTER number of ' GC': 1
2008-08-27 14:32:50 1 12692 TCLUSTER Total Number of UKT 7
2008-08-27 14:32:50 1 12692 TCLUSTER Number of UKT with User Tasks 1
2008-08-27 14:32:50 1 12698 IPC Common RTE specific IPC key: 0x44000000
2008-08-27 14:32:50 1 11536 init_shm attached shared section at 0x700000000000000
2008-08-27 14:32:50 1 11537 init_shm shared section ends at 0x700000010000000
2008-08-27 14:32:52 1 11520 PIPE_IO Input check for pipe with fstat supported
2008-08-27 14:32:52 1 11522 PIPE_IO Input check for pipe with poll supported
2008-08-27 14:32:52 1 11000 INITIAL Verified that open of needed 695 file descriptors is possible
2008-08-27 14:32:53 3 12821 TASKING Thread 3 starting
2008-08-27 14:32:53 1 12767 CLOCK started
2008-08-27 14:32:53 4 12821 TASKING Thread 4 starting
2008-08-27 14:32:53 1 12769 INFO Starting SERVERDB: '+++++++++++++++++++++++++++++++++++++++++++++++++'
2008-08-27 14:32:53 1 12769 INFO Starting SERVERDB: '+++++++++++++++++++ Kernel Forked +++++++++++++++'
2008-08-27 14:32:53 1 12769 INFO Starting SERVERDB: 'ARMDEMO'
2008-08-27 14:32:53 1 12771 INFO Process ID: 385100
2008-08-27 14:32:53 1 12769 INFO Starting SERVERDB: '+++++++++++++++++++++++++++++++++++++++++++++++++'
2008-08-27 14:32:53 1 12811 EVENTING Suppressing output to 'knldiag.evt' 0 pages
2008-08-27 14:32:53 1 12812 EVENTING Eventbuffer 2 events 100 tasks
2008-08-27 14:32:53 5 12821 TASKING Thread 5 starting
2008-08-27 14:32:53 1 12885 MEMORY 2500 Pages allocated for I/O buffer cache
2008-08-27 14:32:53 1 12886 TASKING Maximum task stack size 1024KB
2008-08-27 14:32:53 1 12886 TASKING Task stack at system choosen address
2008-08-27 14:32:53 1 ERR 8 RTEMem No more system pages for 236855296 bytes available,BYTE_SIZE=4096,DESCRIPTION=valloc,ERRORTEXT=ENOMEM ? out of memo
2008-08-27 14:32:53 1 ERR 8 RTEMem ry
2008-08-27 14:32:53 1 ERR 11 RTEMem + Used 24141824 bytes from system heap with a limit of system imposed limitation bytes,ALLOC_COUNT=15,FREE_COUNT
2008-08-27 14:32:53 1 ERR 11 RTEMem + =0,ERROR_COUNT=0,BYTES_MAX_USED=260997120
2008-08-27 14:32:53 1 12886 TASKING Allocating task stack chunk for 225 tasks
2008-08-27 14:32:53 1 12886 TASKING Maximum single aligned task stack size 1024KB
2008-08-27 14:32:53 1 12886 TASKING Size of single task guard area 4KB
2008-08-27 14:32:53 1 ERR 11903 MEMORY FATAL: Allocate of task stack chunk failed
2008-08-27 14:32:53 1 ERR 11903 MEMORY Reduce number of tasks or task stack size to solve this problem
2008-08-27 14:32:53 1 ERR 11196 DBCRASH vabort:Emergency Shutdown, RTE_Crash.cpp: 127
2008-08-27 14:32:53 1 ERR 11599 BTRACE -
> Emergency Stack Back Trace <----
2008-08-27 14:32:53 1 ERR 11599 BTRACE (0):0x1001cbc2c [0xfffffffffffef90]
2008-08-27 14:32:53 1 ERR 11599 BTRACE (1):0x1001c8f24 [0xffffffffffff020]
2008-08-27 14:32:53 1 ERR 11599 BTRACE (2):0x10010ef9c [0xffffffffffff0b0]
2008-08-27 14:32:53 1 ERR 11599 BTRACE (3):0x10007bc30 [0xffffffffffff140]
2008-08-27 14:32:53 1 ERR 11599 BTRACE (4):0x10007cf20 [0xffffffffffff260]
2008-08-27 14:32:53 1 ERR 11599 BTRACE (5):0x100079b48 [0xffffffffffff2f0]
2008-08-27 14:32:53 1 ERR 11599 BTRACE (6):0x1001e2740 [0xffffffffffff360]
2008-08-27 14:32:53 1 ERR 11599 BTRACE (7):0x10021e784 [0xffffffffffff560]
2008-08-27 14:32:53 1 ERR 11599 BTRACE (8):0x1001deea4 [0xffffffffffff620]
2008-08-27 14:32:53 1 ERR 11599 BTRACE (9):0x10021e6c4 [0xffffffffffffa00]
2008-08-27 14:32:53 1 ERR 11599 BTRACE (10):0x1000002d4 [0xffffffffffffaa0]
2008-08-27 14:32:53 1 ERR 11599 BTRACE -
> Module List <----
2008-08-27 14:32:53 1 ERR 11599 BTRACE |.text Start |.text End | Module File Name
2008-08-27 14:32:53 1 ERR 11599 BTRACE |0x0000000100000000|0x0000000101624c9d| kernel
2008-08-27 14:32:53 1 ERR 11599 BTRACE |0x090000000003af80|0x090000000004c406| /usr/lib/libperfstat.a
2008-08-27 14:32:53 1 ERR 11599 BTRACE |0x090000000004d000|0x0900000000084be7| /usr/lib/libpthreads.a
2008-08-27 14:32:53 1 ERR 11599 BTRACE |0x0900000000085c80|0x09000000000a7a3e| /usr/lib/libC.a
2008-08-27 14:32:53 1 ERR 11599 BTRACE |0x09000000000a8360|0x09000000001fe63f| /usr/lib/libC.a
2008-08-27 14:32:53 1 ERR 11599 BTRACE |0x09000000001fff80|0x0900000000212493| /usr/lib/libcfg.a
2008-08-27 14:32:53 1 ERR 11599 BTRACE |0x0900000000213040|0x0900000000228401| /usr/lib/libodm.a
2008-08-27 14:32:53 1 ERR 11599 BTRACE |0x0900000000229da0|0x090000000029ac0c| /usr/lib/liblvm.a
2008-08-27 14:32:53 1 ERR 11599 BTRACE |0x090000000029bfe0|0x09000000002b59e6| /usr/lib/libC.a
2008-08-27 14:32:53 1 ERR 11599 BTRACE |0x09000000002b6a00|0x09000000002d4d9b| /usr/lib/libC.a
2008-08-27 14:32:53 1 ERR 11599 BTRACE |0x09000000002d56b0|0x09000000002d611a| /usr/lib/libC.a
2008-08-27 14:32:53 1 ERR 11599 BTRACE |0x09000000002d78a8|0x09000000002d82b2| /usr/lib/libC.a
2008-08-27 14:32:53 1 ERR 11599 BTRACE |0x09000000002d9280|0x09000000002d9cab| /usr/lib/libcrypt.a
2008-08-27 14:32:53 1 ERR 11599 BTRACE |0x09000000002e0000|0x09000000002e02fb| /usr/lib/libdl.a
2008-08-27 14:32:53 1 ERR 11599 BTRACE |0x09000000002f12c0|0x090000000057400e| /usr/lib/threads/libc.a
2008-08-27 14:32:53 1 ERR 11599 BTRACE
2008-08-27 14:32:53 1 ERR 11599 BTRACE -
> Symbolic Stack Back Trace <----
2008-08-27 14:32:53 1 ERR 11599 BTRACE 0: 0x00000001001cbc2c eo670_CTraceStackOCB +0x0040
2008-08-27 14:32:53 1 ERR 11599 BTRACE kernel
2008-08-27 14:32:53 1 ERR 11599 BTRACE Frameinfo [0xfffffffffffef90]
2008-08-27 14:32:53 1 ERR 11599 BTRACE 1: 0x00000001001c8f24 vabort +0x0040
2008-08-27 14:32:53 1 ERR 11599 BTRACE kernel
2008-08-27 14:32:53 1 ERR 11599 BTRACE Frameinfo [0xffffffffffff020]
2008-08-27 14:32:53 1 ERR 11599 BTRACE 2: 0x000000010010ef9c RTE_Crash__FRC20SAPDBErr_MessageList +0x00cc
2008-08-27 14:32:53 1 ERR 11599 BTRACE kernel
2008-08-27 14:32:53 1 ERR 11599 BTRACE Frameinfo [0xffffffffffff0b0]
2008-08-27 14:32:53 1 ERR 11599 BTRACE 3: 0x000000010007bc30 ReserveOrAllocateBigChunk__20RTE_TaskStackControlFb +0x02d4
2008-08-27 14:32:53 1 ERR 11599 BTRACE kernel
2008-08-27 14:32:53 1 ERR 11599 BTRACE Frameinfo [0xffffffffffff140]
2008-08-27 14:32:53 1 ERR 11599 BTRACE 4: 0x000000010007cf20 Initialize__35RTE_BigAddressSpaceTaskStackControlFlP9TASK_TYPET2 +0x0064
2008-08-27 14:32:53 1 ERR 11599 BTRACE kernel
2008-08-27 14:32:53 1 ERR 11599 BTRACE Frameinfo [0xffffffffffff260]
2008-08-27 14:32:53 1 ERR 11599 BTRACE 5: 0x0000000100079b48 en88CreateAndPrepareTaskStacks +0x0030
2008-08-27 14:32:53 1 ERR 11599 BTRACE kernel
2008-08-27 14:32:53 1 ERR 11599 BTRACE Frameinfo [0xffffffffffff2f0]
2008-08-27 14:32:53 1 ERR 11599 BTRACE 6: 0x00000001001e2740 en81RunKernel +0x039c
2008-08-27 14:32:53 1 ERR 11599 BTRACE kernel
2008-08-27 14:32:53 1 ERR 11599 BTRACE Frameinfo [0xffffffffffff360]
2008-08-27 14:32:53 1 ERR 11599 BTRACE 7: 0x000000010021e784 en80RunKernel +0x006c
2008-08-27 14:32:53 1 ERR 11599 BTRACE kernel
2008-08-27 14:32:53 1 ERR 11599 BTRACE Frameinfo [0xffffffffffff560]
2008-08-27 14:32:53 1 ERR 11599 BTRACE 8: 0x00000001001deea4 en81_kernel_main +0x05b8
2008-08-27 14:32:53 1 ERR 11599 BTRACE kernel
2008-08-27 14:32:53 1 ERR 11599 BTRACE Frameinfo [0xffffffffffff620]
2008-08-27 14:32:53 1 ERR 11599 BTRACE 9: 0x000000010021e6c4 main +0x0198
2008-08-27 14:32:53 1 ERR 11599 BTRACE kernel
2008-08-27 14:32:53 1 ERR 11599 BTRACE Frameinfo [0xffffffffffffa00]
2008-08-27 14:32:53 1 ERR 11599 BTRACE -
> End of Stack Back Trace <----
2008-08-27 14:32:53 1 11987 dump_rte rtedump written to file 'rtedump'
2008-08-27 14:32:53 1 ERR 7 Messages Begin of dump of registered messages
2008-08-27 14:32:53 1 ERR 8 Messages End of the message list registry dump
2008-08-27 14:32:53 1 ERR 11195 DBCRASH vabort:Emergency Shutdown
2008-08-27 14:32:53 1 12696 DBSTATE Change DbState to 'KILL'(29)
2008-08-27 14:32:53 1 12696 DBSTATE Change DbState to 'NO_TRACEFLAG'(0)
2008-08-27 14:32:53 1 12696 DBSTATE Change DbState to 'NO_DUMPFLAG'(0)
+++++++++++++++++++++++++++++++++++++++ Kernel Exit ++++++++++++++++++++++++++++
2008-08-27 14:32:54 0 11987 dump_rte rtedump written to file 'rtedump'
2008-08-27 14:32:54 0 ERR 12006 DBCRASH Kernel exited without core and exit status 0x100
2008-08-27 14:32:54 0 ERR 12010 DBCRASH Kernel exited exit code 1
2008-08-27 14:32:54 0 12890 DIAGHIST Backup of diagnostic files will be forced at next restart
2008-08-27 14:32:54 0 12696 DBSTATE Change DbState to 'OFFLINE '(29)
current write position -
========================================
$ ulimit -a
time(seconds) unlimited
file(blocks) unlimited
data(kbytes) unlimited
stack(kbytes) 2500000
memory(kbytes) unlimited
coredump(blocks) unlimited
nofiles(descriptors) unlimited
Any ideas or suggestions?
Thanks,
Daviddavid possinger wrote:
> 2008-08-27 14:32:53 1 12885 MEMORY 2500 Pages allocated for I/O buffer cache
> 2008-08-27 14:32:53 1 12886 TASKING Maximum task stack size 1024KB
> 2008-08-27 14:32:53 1 12886 TASKING Task stack at system choosen address
> 2008-08-27 14:32:53 1 ERR 8 RTEMem No more system pages for 236855296 bytes available,BYTE_SIZE=4096,DESCRIPTION=valloc,ERRORTEXT=ENOMEM ? out of memo
> 2008-08-27 14:32:53 1 ERR 8 RTEMem ry
> 2008-08-27 14:32:53 1 ERR 11 RTEMem + Used 24141824 bytes from system heap with a limit of system imposed limitation bytes,ALLOC_COUNT=15,FREE_COUNT
> 2008-08-27 14:32:53 1 ERR 11 RTEMem + =0,ERROR_COUNT=0,BYTES_MAX_USED=260997120
> 2008-08-27 14:32:53 1 12886 TASKING Allocating task stack chunk for 225 tasks
> 2008-08-27 14:32:53 1 12886 TASKING Maximum single aligned task stack size 1024KB
> 2008-08-27 14:32:53 1 12886 TASKING Size of single task guard area 4KB
> 2008-08-27 14:32:53 1 ERR 11903 MEMORY FATAL: Allocate of task stack chunk failed
> 2008-08-27 14:32:53 1 ERR 11903 MEMORY Reduce number of tasks or task stack size to solve this problem
Hi David,
see above. Did you try to reduce the number of tasks?
What about free memory on OS level? What about free swap space on OS level? Are there any kernel parameters to be set in AIX? I'm not very familiar with AIX as I come from Solaris. But on Solaris you can configure different parameters for max files open etc. using kernel parameters. Is there something similiar in AIX?
Regards
André -
Cannot Complete KB2919355 Update, Error Code : 0xc0000001
Hello,
I encountered the MS KB2919355 update problem last year, and did not succeed in installing this update. I returned to the problem a few days ago and made some progress, however full installation is still elusive.
I have a HP m7-J010DX notebook, E0K83UAR, Intel Core i7-4700MQ CPU, Win 8.1x64
All other Windows & HP updates are installed.
I followed the advice in another message, and performed the following operations,
------------------------------------------------- KB2919335 Installation Procedure
1. download and install
KB2959977 2.8MB (Jan/11/2015, already installed)
KB2938439 19.6MB
KB2937592 303KB
KB2934018 126.4 MB
KB2932046 48 MB
2. Next, resetting Windows Update components
WindowsUpdateDiagnostic.diagcab (downloaded and ran, fixed two things)
3. The next step is performing a System File Check
CMD as Admin: "sfc /scannow"
Result: (I fixed this later, see below)
Windows Resource Protection found corrupt files but was unable to fix some
of them. Details are included in the CBS.Log windir\Logs\CBS\CBS.log. For
example C:\Windows\Logs\CBS\CBS.log. Note that logging is currently not
supported in offline servicing scenarios.
3b.
Found the following command,
CMD as Admin: "Dism /Online /Cleanup-Image /RestoreHealth"
The restore operation completed successfully.
The component store corruption was repaired.
Went back to step 3 ("sfc /scannow") and now received
"Verification 100% complete.
Windows Resource Protection did not find any integrity violations."
4. Next, please remove KB2919355
CMD as Admin:
"dism /online /remove-package /packagenameackage_for_KB2919355~31bf3856ad364e35~amd64~~6.3.1.14"
(funny symbol should read "colon capital-p")
5. The WinSxS folder also has to be cleaned.
CMD as Admin:
"dism /online /cleanup-image /startcomponentcleanup /resetbase"
6. Restart computer and then run the offline installer:
Windows8.1-KB2919355-x64.msu (KB2919355 690.8 MB)
7. Restart computer during the process whenever it is required.
Updating Computer
...30% complete
Do not turn off your computer.
This is when a problem occurred...
circling dots moved to LHS of screen, computer restarted,
"Your PC ran into a problem and needs to restart
SYSTEM_THREAD_EXCEPTION_NOT_HANDLED
Error Code : 0xc0000001"
Used,
F8
"Option 5 : Safe Mode with Networking"
after restart,
"we couldn't complete the updates
undoing changes
Don't turn off your computer"
After a further restart the computer returned to logon.
I would appreciate advice on how to proceed in order to complete installation of this update.
Thank you.I read elsewhere that using the Advanced Options/Automatic Repair procedure could fix the installation.
I tried this, it did not work, and now the situation is worse. The error report has changed to,
The boot config data for your PC is missing or contains errors
File : \EFI\Microsoft\Boot\BCD
Error code : 0xc000000f
The "Press F8 for Startup Settings" option no longer appears, and I can no longer get back to the log in screen and use the computer.
I still have Troubleshoot options,
1. Refresh your PC
2. Reset your PC
3. Recovery Manager (leads to USB based HP Recovery Manager
after about 110sec of blue screen)
4. Advanced Options
4. Advanced Options leads to,
1. System Restore
2. System Image Recovery
3. Automatic Repair
4. Command Prompt
5. UEFI Firmware Settings
Every option that I have tried has failed. I do no appear to have a restore point set (though I thought that I did) so I cannot restore to an earlier date.
F9 Boot Device Option/Boot Manager shows.
1. OS boot Manager
2. USB Hard Drive (UEFI)
3. Boot From EFI File
4. Notebook Hard Drive
5. USB Hard Drive
3. Boot from EFI File leads to a three options the first of which is,
NO VOLUME LABEL, [Acpi(PNPxxxx, 0)/Pci(yyyy)/Usb(zz, 0)/HD(Part1, Sig00000000)]
and thus eg.(there are other folders), EFI\Boot\en-gb\bootx64.efi.mui for the USB Recovery Drive which leads back to USB Drive Recovery Manager.
There are also two other options, one for the main SSD that will no longer boot, and the other for the computers second drive (the original HDD) that has an earlier version of a booting drive C: (I cloned from the HDD -> SSD and use the HDD as a backup drive, however I left the original partitions in place).
If I try to boot from the earlier data on the HDD (I did not really expect this to work completely) I get to the login screen, and an earlier password initially appears to be accepted, I get a brief Welcome, and then "The password is incorrect. Try again."
I have a recent file backup and am figuring out a way to make a current file backup.
I then plan to attempt a minimized image recovery or system recovery, unless I find a way to return to the login screen.
Any suggestions ?
Thank you. -
What is the meaning of error code 137
I'm trying to backup the database into ldif file, and using the command as belows:
./ns-slapd db2ldif -D ../../../slapd-33389 -a /data/EXPORT/directory_services/offline/directoryDB.ldif -n InstallUpgradedata
But under some condition, it returned me an error 137, and killed some process. The first time doing the backup is OK, just the second time. I'm running it in my script. After got the error, I tested the command using command line, and it is fine.
Is anybody could tell me what is the error code 137 mean? Or where can I find it?
Thanks in advance.Error -3150, normally mean there is no Internet connection or the connection is erratic and keeps dropping.
So you are in the wrong forum, I think iTunes forum would be more helpful.
Here is the support link for home-sharing, go through it step by step.
http://support.apple.com/kb/TS2972
Good Luck! -
Dear all,
I know there are quite some threads regarding this issue. But I've been looking at all of them w/o any solution for my problem. Here we go...
I've followed all instructions for a Exchange 2003 to 2010 transition. All went fine to the point I'm trying to uninstall Exchange 2003 via Control Panel/Software/Remove. So far I did the following:
1. Move mailboxes to Exchange Server 2010 using Move Mailbox Wizard or Powershell => successfully
2. Rehome the Offline Address Book (OAB) generation server to Exchange Server 2010 => successfully
3. Rehome Public Folder Hierarchy on new Exchange Server 2010 Admin Group => successfully
4. Transfer all Public Folder Replicas to Exchange Server 2010 Public folder store => successfully
5. Delete Public and Private Information Stores from Exchange 2003 server => successfully
6. Delete Routing Group Connectors to Exchange Server 2003 => successfully
7. Delete Recipient Update Service agreements using ADSIEdit according to
http://technet.microsoft.com/en-us/library/bb288905(EXCHG.80).aspx => successfully
8. Uninstall all Exchange 2003 servers => fails with "Error code 0X80072030 (8240): There is no such object on the server"
I used the following articles while migrating to Exchange 2010:
http://technet.microsoft.com/en-us/library/bb288905(EXCHG.80).aspx
http://support.microsoft.com/kb/833396/en-us
http://www.simple-talk.com/content/article.aspx?article=882
and several more.
I looked into these forums regarding my problem and came up with:
http://support.microsoft.com/kb/283089/en-us
http://support.microsoft.com/kb/822931
I investigated the following possible reasons:
- homeMDB attribute (no references to my Exchange 2003 anymore)
- HomeMDBBL attribute (as described here
http://social.technet.microsoft.com/Forums/en-US/exchangesvrmigration/thread/f0e3edd7-34e5-46b8-8061-1991aaffc30f) (no Information Stores available anymore as they have been successfully removed)
- msExchHomeServerName attribute (all pointing to my new Exchange 2010 server)
- the "famous" postmaster issue as described here:
http://support.microsoft.com/kb/283089/en-us (pointing to the new Exchange 2010 server)
In order to investigate all attribute related issues a utilized a VBS script resulting in an Excel sheet I was easily able to filter:
SET objRootDSE = GETOBJECT("LDAP://RootDSE")
strExportFile = "C:\temp\MyExport.xls"
strRoot = objRootDSE.GET("DefaultNamingContext")
strfilter = "(&(objectCategory=Person)(objectClass=User))"
strAttributes = "sAMAccountName,msExchHomeServerName,homeMDB,legacyExchangeDN,givenName,sn," & _
"initials,displayName,physicalDeliveryOfficeName," & _
"telephoneNumber,mail,wWWHomePage,profilePath," & _
"scriptPath,homeDirectory,homeDrive,title,department," & _
"company,manager,homePhone,pager,mobile," & _
"facsimileTelephoneNumber,ipphone,info," & _
"streetAddress,postOfficeBox,l,st,postalCode,c"
strScope = "subtree"
SET cn = CREATEOBJECT("ADODB.Connection")
SET cmd = CREATEOBJECT("ADODB.Command")
cn.Provider = "ADsDSOObject"
cn.Open "Active Directory Provider"
cmd.ActiveConnection = cn
cmd.Properties("Page Size") = 1000
cmd.commandtext = "<LDAP://" & strRoot & ">;" & strFilter & ";" & _
strAttributes & ";" & strScope
SET rs = cmd.EXECUTE
SET objExcel = CREATEOBJECT("Excel.Application")
SET objWB = objExcel.Workbooks.Add
SET objSheet = objWB.Worksheets(1)
FOR i = 0 To rs.Fields.Count - 1
objSheet.Cells(1, i + 1).Value = rs.Fields(i).Name
objSheet.Cells(1, i + 1).Font.Bold = TRUE
NEXT
objSheet.Range("A2").CopyFromRecordset(rs)
objWB.SaveAs(strExportFile)
rs.close
cn.close
SET objSheet = NOTHING
SET objWB = NOTHING
objExcel.Quit()
SET objExcel = NOTHING
Wscript.echo "Script Finished..Please See " & strExportFile
What I did find is that all my Exchange enabled users have an legacyExchangeDN attribute that is still pointing to my Exchange 2003 organization:
e.g. "/o=First Organisation/ou=First Administrative Group/cn=Recipients/cn=Administrator"
Could this cause any problems?
Now the in depth look into my "Exchange Server Setup Progress.log":
[09:33:06] Leaving ScPRQ_DoesNotContainLastMAPIMDBInMixedModeAG
[09:33:06] ScPRQ_ServerIsNotRUSResponsibleServerInTheNonEmptyOrg (f:\titanium\admin\src\udog\excommon\prereq.cxx:3133)
Error code 0X80072030 (8240): Ein solches Objekt ist auf dem Server nicht vorhanden.
[09:33:06] CCompServer::ScCheckEVSPrerequisites (f:\titanium\admin\src\udog\exsetdata\components\server\compserver.cxx:1358)
Error code 0X80072030 (8240): Ein solches Objekt ist auf dem Server nicht vorhanden.
[09:33:06] CCompServer::ScCheckPrerequisites (f:\titanium\admin\src\udog\exsetdata\components\server\compserver.cxx:955)
Error code 0X80072030 (8240): Ein solches Objekt ist auf dem Server nicht vorhanden.
[09:33:06] CComExchSetupComponent::ScCheckPrerequisites (f:\titanium\admin\src\udog\bo\comboifaces.cxx:1598)
Error code 0X80072030 (8240): Ein solches Objekt ist auf dem Server nicht vorhanden.
[09:33:06] CComExchSetupComponent::ScCheckPrerequisites (f:\titanium\admin\src\udog\bo\comboifaces.cxx:1598)
Error code 0X80072030 (8240): Ein solches Objekt ist auf dem Server nicht vorhanden.
[09:33:06] === IGNORING PREVIOUS ERRORS === HrSetProblemOnInstallAction, while calling ScCheckPrerequisites (f:\titanium\admin\src\udog\bo\comboifaces.cxx:1399)
Der Vorgang wurde erfolgreich beendet.
[09:33:06] Ein Fehler ist beim Überprüfen der Voraussetzungen für die Komponente "Microsoft Exchange" durch Setup aufgetreten:
0X80072030 (8240): Ein solches Objekt ist auf dem Server nicht vorhanden.
[09:33:14] CComBOIFacesFactory::QueryInterface (f:\titanium\admin\src\udog\bo\bofactory.cxx:54)
I did search for:
- Error code 0X80072030 (8240)
- ScPRQ_ServerIsNotRUSResponsibleServerInTheNonEmptyOrg
Nothing so far. In case some more information is needed just let me know.
Any help would be greatly appreciated as I absolutely don't know how to remove my Exchange 2003. Manual removal is not an option.
AlexI kept on searching and found something else:
http://www.outlookforums.com/threads/33038-cannot-uninstall-Exchange-2000
It says that the following groups need to be resided in the AD's default "Users" organizational unit:
- Exchange Domain Servers
- Exchange Enterprise Servers
- Exchange Services Group
Unfortunately I cannot find the "Exchange Services Group". Does that have something to do with my problem?
Furthermore I found out that the Exchange 2003 has been originally installed with SBS 2003 back in time. The SBS 2003 has then be migrated to a regular Windows Server 2003 infrastructure with 2 DCs. But there still is a load of stuff reminiscent of SBS
2003 within the AD.
Then I dug deeper into my AD using ADSIEdit. I found another attribute homeMTA that is pointing to a corresponding Exchange server. After adjusting my aforementioned VBS script a was able to look into that attribute as well. I found 2 users pointing to my old
Exchange server within their homeMTA attribute.
Furthermore I saw that when trying to uninstall Exchange 2003 there is no path to my installation anymore. It's empty:
Another issue?
Regards
Alex -
Error code 0x803C010B when printing wirelessly: Has anyone found a solution yet?
I read all of the Microsoft forums regarding this issue but no one seemed to find a reliable solution. When there was a solution for one person, then it didn't work for someone else.
I called MS tech support, and they told me that they have received many calls about this error. The tech said that only MS could fix it and she charged me $100, with a 100% guarantee that it would be fixed. She evaded each time I asked her what
was the root cause of the error.
MS tech noticed three corrupted files from a Windows update, then started searching for viruses and malware, of which she found several, even though I had Norton protection. Then she tried to sell me a different anti-virus program, for more money,
which I declined until they could tell me the root cause of the problem.
Unfortunately I had an appointment so I left the tech working on my computer remotely. When I returned the problem was still not fixed. Printer still shows as offline or even turned off, when it is neither of these things, and I receive the above-referenced
error code when I try to troubleshoot.
I have a follow-up call with a MS tech today. I will post updates to this. It seems that they do not know how to fix it, either.I'm having the same issue but with HP Photosmart 7525 and HP LaserJet P1102W. Both worked fine until earlier this week when I "shut down and updated" my computer. I keep deleting the printers from my computer and reinstalling them;
they work temporarily then tell me they are "offline" when, clearly, they are not. -
ORA-00600: internal error code, arguments: [kcratr_nab_less_than_odr], [1],
Hi All,
In our lab 11gR2 RAC setup is up and running (11.2.0.1). Last night due to some issue with power or power failure servers went down directly.
When restart the RAC server, all the RAC related services are up and running except second node VIP is offline and database was down.
When I go for database startup through srvctl command it gives ora-00600 internal error.
ORA-00600: internal error code, arguments: [kcratr_nab_less_than_odr], [1], [2692], [912], [913], [], [], [], [], [], [], []
From metalink (ID 1296264.1) I come to know there was a power failure causing logical corruption in controlfile.
From metalink doc having steps for single instance but not sure how to follow the same steps in cluster environment.
Is any body ever face the similar issue in RAC environment? Is this only second node VIP issue ?
Thanks...Conceptually you have one database, and one set of control files, accessed from multiple instances.
If the issue would have been with online redo logs (there is one thread of redo log files per instance), instance would have mattered.
Now it doesn't matter, as there is one set of control files per database, not per instance.
Sybrand Bakker
Senior Oracle DBA -
Got error code 2869 when installing iTunes 8.2 on win xp sp2
anybody can tell me how to resolve it ? thx
Hello,
Another weekend, another round of trying to get this to work - I have no life
I found the log file and it's pretty clear on the error:
2008-07-13 14:54:50 --- Starting GMT 2008-07-13 13:54:50 7.6.03 Build 009-123-163-622
2008-07-13 14:55:20 0x154 ERR 18499 IO Wrong path 'J:\sapdb\J2E\sapdata\DISKD0002'
2008-07-13 14:55:20 0x574 ERR 18499 IO Wrong path 'J:\sapdb\J2E\sapdata\DISKD0001'
2008-07-13 14:55:20 0x618 ERR 3 Admin Database state: OFFLINE
2008-07-13 14:55:20 0x618 ERR 6 KernelCo + Internal errorcode, Error code 9050 "disk_not_accessible"
2008-07-13 14:55:20 0x618 ERR 20030 IOMan + Formatting of data area failed
2008-07-13 14:55:20 0x7A8 ERR 7 Messages Begin of dump of registered messages
2008-07-13 14:55:20 0x7A8 ERR 10 Messages abort dump of registered messages
2008-07-13 14:55:20 0x7A8 ERR 8 Messages End of the message list registry dump
2008-07-13 14:55:21 ___ Stopping GMT 2008-07-13 13:55:21 7.6.03 Build 009-123-163-622
So, drive J: is wrong (I'm installing on D:), and I cannot find any files by that name. Seems the installation scripts are screwed. I will try installing to disk J: and revert back.
Thanks for your input.
Cheers,
Mike
Maybe you are looking for
-
Sender Logical system lost in BPM
Hi, we have the next scenario: 3 Sender Business Systems(file)->BPM->R/3System(IDOC). We want that the inbound idocs arrive to R/3 with their corresponding Sender Logical System. The problem is that the idocs arrive with the Logical system of BPM. I
-
Verizon to offer $100 bill credit on new lines activated? Is this true?
All over the internet, cellphone websites like AndroidCentral are reporting that Verizon is now offering $100 of credit for every new line activated from Feb. 7th to 28th. I just added 2 lines recently and was curious if anyone has heard anything abo
-
"cannot resolve symbol" help..
Here is a very short and simpel program that won't compile after I reinstalled java on my computer. import java.lang.Math.*; import java.awt.*; public class PiTest extends Frame { public static void main(String[] p){ System.out.println("tes
-
hello Can any one tell what's wrong with this code : PROCEDURE WRITE_ITEM_BLOCK (FILENAME IN VARCHAR2) IS MYFILE TEXT_IO.FILE_TYPE; CUR_REC NUMBER; BEGIN MYFILE := TEXT_IO.FOPEN('c:\test.text', 'W'); TEXT_IO.PUTF(MYFILE,'this is my first line '); TEX
-
Unable to delete PSA data through process chain.
Hi Everyone, I have got a problem in PSA deletion. We have got few PSA and change log deletion jobs which run at daily or fortnight basis. We planned to add few PSA tables to each daily and fortnight jobs depending on requirement. We added in develop