Offline files window shows drive name but no files to reconnect
I recently upgraded to Final Cut Studio 2 in the middle of a project (I know, broke the golden rule) but I had backed up my whole system drive so that was OK, install went fine. Now whenever I open the project, the "some Files are offline" window pops up and under "Files to Reconnect" there is the name of the main Scratch drive but no files to reconnect. Any ideas how to stop this happening? It doesn't seem to hinder the editing process but it's a bug I could do without. Just annoying more than anything.
Before clicking on "Reconnect", check the box that offers you to "Forget" the files. there may be 2 - one for media and one for render files.
Nothing like that. Just the drive name "BYTE:" and lots of blank space
PS And change your autosave to 5 minutes until you are sure FCP6 is stable on your system. On mine I have regular crashes. Also get the updates: I think we're on 6.0.2 by now.
Yes I'm up to the latest version 6.0.3 and I will change Autosave prefs to 5 mins good idea. I've actually pretty much finished the film. Taken 5 years so has been through several versions of FCP
Similar Messages
-
Changed internal shared drive name, but other Macs see it as an old name
Hi evryone,
I have Mac Pro, and 2 Mac minis. Just updated all to 10.9.
This MP has a 2nd drive that sherd on my network. I just cahnged this internal drive name, but other 2 Mac minis still only see the old name.
Am I missing something? I tried many things, but it shows up with the old name.
Please advise.
Thank you!How did you change its name, if you just changed it on the desktop it may not be enough. I found this article on changing the Macintosh HD name but it will be the same way for other disks.
http://www.ehow.com/how_6085991_change-apple-hd-name.html
And you may also have to do the other things Joe suggested. -
hi guys i have an ipad 1 and when i plug it in to my macbook pro picasa opens up and show its name but when i open itunes i cant find the name, ive been working my head out to solve the problem please help me:(
Pay no attention to iinami, the amount of replies to people saying their handsets must have been jailbroken everytime iTunes throws out an error is tremendous. (Clearly you don't need to have any real knowledge to get to level 3 on these forums, let's hope apple's geniuses know a lot more than some of their customers.)
http://support.apple.com/kb/TS3694
Solution below.
Error 9
This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if the device is manually disconnected during the restore process. This issue can be resolved by performing USB troubleshooting, using a different USB dock-connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software. -
I am trying to install Illustrator C6 on new system (Win8.1), Already de-activated from old system. I downloaded the 3 files. First file opened and had fonts, but second file (1.8Gb) does not open; does not appear to have an exe file. How do i install?
what files (names and extensions) did you download?
Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 |12 | 11, 10 | 9, 8, 7
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.
window using the Lightroom 3 link to see those 'Important Instructions'. -
I can't download the Adobe Edge Reflow. The file's downloading is successfull but the file doesn't go to my Creative Cloud so I can't install the programme. I have already install the Photoshop CC and the Reflow Plug-in for Photoshop.
Hello
1. I am running on Windows 8.1
2. When running the installer file from https://creative.adobe.com/products/download/reflow I get the following choice
I click "OK" which doesn't do anything for me (CC is off).
I turn CC on and run the installer again. I get the following window that within few settings disappears:
Then - just for half a second it says "Launching Creative Cloud desktop" and then it brings CC to front, and that's all.
RF still not there.
3. I spoke ta support agent on the Adobe chat on Friday. He looked into my computer for an hour. Uninstalled After Effects (after failing to update it). For some reason all apps disappeared from the list. They then reappeared after he opened PS.
This morning After Effects is still showing up in my system and is operational.
Weird.
4. At the end the agent suggested maybe Firewall is the problem here. Trying that out now. -
I have downloaded a music file through a downloader . But the file is not found in the captured in music player . How can I locate the physical location and move the file . I cannot do via itunes also .
Exactly what do you mean by a 'downloader'?
Thanks
Pete -
I'm running Windows XP which is updated to latest version (which I think might be Service Pack 3, but not positive.) Mozilla Firefox is version 5.0. I tend to use Google as my search engine so most of the stuff I download comes through sites found through Google, which is also updated.
At some time in the past (maybe a few versions ago) when I would download a file from the Web, the "Downloads" window would open and in the window would be displayed the name of the file I was downloading or had just completed downloading. I think I used to be able to then click on that file name and the file (or the installation file if needed to start the new program) would open. I am currently using Firefox 5.0 (the "About Firefox" screen says this is up to date) and when I download a file or document, the "Downloads" window appears on the screen as it always has in the past, but it remains blank, i.e., nothing appears in the downloads box. I don't remember making any configuration changes, etc., that may have caused the window to remain blank, but I could be mistaken. I know how to find the items I've downloaded (My Documents / Downloads) and can usually guess what the name of the downloaded file might be, but it used to be much easier when something (anything) showed up in the downloads window.
I'd love for someone to tell me about a simple fix for this. I'm willing to be quite embarrassed that I did something I shouldn't have.'''In Firefox Options / Privacy be sure "Remember download history" is checked. To see all of the options on that panel, "Firefox will" must be set to "Use custom settings for history".
To find your OS information, on your Windows desktop, right-click the My Computer icon, choose Properties, under System on that small window is info about your OS.
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.''' -
Lately can not find a file location directory, when searching for the file finder finds it right away but I can not see where the file is located in the computer directory. Lately I see simplification of Mac OSX which is not always a good thing where I have to find the answers on the internet when my intuitive way is out- like finding monitor resolution with a use of option key to display all the options. I looks like Windows 8 and Microsoft philosophy of simplification without any logic is adopted by Apple engineers.
Open Finder> go to View> choose "Show Path Bar."
Highlight any file and the complete path will show in the bottom finder window bar now. -
List content type columns don't show new names after resource files were changed
Hello,
we ran into a problem, that we're not able to figure out at the moment.
We have a site collection with site columns and site content types defined and created with
features ant their XML files. All display names are retrieved from resource files. We do have
several subsites, that have predefined lists also created from features and their corresponding
XML files. They use inherited versions of these site content types as list content types with
their columns inherited from the site columns.
We had some changes within the resource files and never ran into a problem up to now.
We changed the display names of some of these columns within the resource files. After
these changes the site columns, site content types and list columns show the changes
as planned. Unfortunately the columns of the list content types do not display the changes.
They still show the old name. If you try to alter the old names manually the new name is
shown within the form, but you're not able to save it and the list content type columns
still have their old name afterwards.
We checked our definition files and they seemed to be well.
Any ideas?
Regards,
Markus
List columns as defined within new the resource file:
List content type columns, that do not show the changes from the new resource file:Hi,
According to your post, my understanding is that you want to modify the site column name in the list.
I try to reproduce the issue, however, everything works well.
You can modify the DisplayName in the Element.xml file.
Then after you redeploy the project, the site column name will be changed in the list setting page.
In addition, please check whether you create the list correctly.
For more information, you can refer to
Walkthrough: Create a Site Column, Content Type, and List for SharePoint
Thanks,
Linda Li
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Linda Li
TechNet Community Support -
Activity windows shows "cancelled" for a .mpg file
When I paste a valid URL into Safari the Quicktime player opens within Safari but the status message reads: "Failed to open page (see Activity window for details)". The activity windows status column just reads: "cancelled" that that URL.
Pasting the URL into Firefox works w/o a problem.
I am using Safari 5 and SnowLeopard (with all the latest updates).
OlafThere seems to be a bug in Safari with .mpg files that include a space in the file name:
* Safari issues a cryptic error, not even a file not found type error.
* Replacing the file name with a %20 does not work either.
* Safari works fine for *.mp4 files that include a space in the file name.
URL with a space fails:
http://www.wilhelmtell.org/images/Wilhelm Tell.org_web5.mpg
This URL also fails (but works in other browsers):
http://www.wilhelmtell.org/images/Wilhelm%20Tell.org_web5.mpg
URL w/o space in the file name works:
http://www.wilhelmtell.org/images/WilhelmTell.orgweb51.mpg
URL with a space in for .mp4 works:
http://www.wilhelmtell.org/images/Wilhelm Tell.org_web3.mp4
Olaf -
New message address shows the Name but not full email address
The email To: will show the name eg John Doe but not the full description [email protected] If I click on the tab by the name I will see the full email address referenced. If mail sees just the name it sometimes says John Doe does not appear to be a valid email. If I send an email to myself at other email accts I have (aol for example) the mail does arrive. I think this may be related to address book but not sure. If I enter a new email in the TO in a new message It keeps the entire email address, I think. Anyway just want some feedback about this since thee is a degree of uncertainty here
mail will indeed draw from address book's contacts. if you have in mail>preferences>viewing the option "use smart addresses" checked, then the name of the contact will be displayed in the to/from... fields and you can see the full email address when selecting the tab next to the name. so that is normal behavior. if you enter a new email address for which you do not have a contact card created in address book, then that will remain as an email address in the field you entered it to. you would have to create a card in address book, add that email address, and then the name of the contact would appear in an email field rather than only the email address.
hope this helps -
after updating my iphone 5 c to the latest iOS version, i am getting texts from some (not all) of my contacts that no longer display the name but only +1 followed buy the phone number. Is there something that needs to be adjusted in the settings to fix ths problem?
Open your contact list and swipe down from the top. You can filter your contact list by account. Anything not in any of the listed contact types is a local contact. It would help if we could narrow down where the contacts were stored previously vs. where they are stored now.
-
File Chooser is displaying names of the Files and Directories as boxes
Hi All,
Actually i am working on an application in which i have the requirement to internationalize the File Chooser in All Operating Systems. The application is working properly for all languages on MAC OS, but not working properly for the language Telugu on both the Ubuntu and Windows OS. The main problem is, when i try to open the File Chooser after setting the language to TELUGU all the labels and buttons in the File Chooser are properly internationalized but names of Files and directories in the File Chooser are displaying as boxes.
So please provide your suggestions to me.
Thanks in Advance
Uday.I hope this can help you:
package it.test
import java.awt.BorderLayout;
import java.awt.Frame;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import java.util.Locale;
import javax.swing.JButton;
import javax.swing.JDialog;
import javax.swing.JFileChooser;
import javax.swing.JFrame;
import javax.swing.JPanel;
import javax.swing.SwingUtilities;
import javax.swing.UIManager;
* @author Alessandro
public class Test extends JDialog {
private JFileChooser fc = null;
private Frame bfcParent = null;
public Test(Frame parent, boolean modal) {
super(parent, modal);
this.bfcParent = parent;
if (fc == null) {
fc = new JFileChooser();
fc.setAcceptAllFileFilterUsed(false);
fc.setLocale(Locale.ITALIAN);//i think you should use english
//these are in telugu
UIManager.put("FileChooser.openDialogTitleText", "Open Dialog");
UIManager.put("FileChooser.saveDialogTitleText", "Save Dialog");
UIManager.put("FileChooser.lookInLabelText", "LookIn");
UIManager.put("FileChooser.saveInLabelText", "SaveIn");
UIManager.put("FileChooser.upFolderToolTipText", "UpFolder");
UIManager.put("FileChooser.homeFolderToolTipText", "HomeFolder");
UIManager.put("FileChooser.newFolderToolTipText", "New FOlder");
UIManager.put("FileChooser.listViewButtonToolTipText", "View");
UIManager.put("FileChooser.detailsViewButtonToolTipText", "Details");
UIManager.put("FileChooser.fileNameHeaderText", "Name");
UIManager.put("FileChooser.fileSizeHeaderText", "Size");
UIManager.put("FileChooser.fileTypeHeaderText", "Type");
UIManager.put("FileChooser.fileDateHeaderText", "Date");
UIManager.put("FileChooser.fileAttrHeaderText", "Attr");
UIManager.put("FileChooser.fileNameLabelText", "Label");
UIManager.put("FileChooser.filesOfTypeLabelText", "filesOfType");
UIManager.put("FileChooser.openButtonText", "Open");
UIManager.put("FileChooser.openButtonToolTipText", "Open");
UIManager.put("FileChooser.saveButtonText", "Save");
UIManager.put("FileChooser.saveButtonToolTipText", "Save");
UIManager.put("FileChooser.directoryOpenButtonText", "Open Directory");
UIManager.put("FileChooser.directoryOpenButtonToolTipText", "Open Directory");
UIManager.put("FileChooser.cancelButtonText", "Cancel");
UIManager.put("FileChooser.cancelButtonToolTipText", "Cancel");
UIManager.put("FileChooser.newFolderErrorText", "newFolder");
UIManager.put("FileChooser.acceptAllFileFilterText", "Accept");
fc.updateUI();
public int openFileChooser() {
fc.setDialogTitle("Open File");
fc.resetChoosableFileFilters();
int returnVal = 0;
fc.setDialogType(JFileChooser.OPEN_DIALOG);
returnVal = fc.showDialog(this.bfcParent, "Apri File");
//Process the results.
if (returnVal == JFileChooser.APPROVE_OPTION) {
System.out.println("Hai scelto di aprire un file");
} else {
System.out.println("hai annullato l'apertura");
return returnVal;
private static void createAndShowGUI() {
JFrame frame = new JFrame("FileChooser");
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
JPanel jp = new JPanel(new BorderLayout());
JButton openButton = new JButton("Open File");
final Test test = new Test(frame, true);
openButton.addActionListener(new ActionListener() {
@Override
public void actionPerformed(ActionEvent e) {
test.openFileChooser();
openButton.setEnabled(true);
jp.add(openButton, BorderLayout.AFTER_LAST_LINE);
//Add content to the window.
frame.add(jp);
//Display the window.
frame.pack();
frame.setVisible(true);
public static void main(String[] args) {
//Schedule a job for the event dispatch thread:
//creating and showing this application's GUI.
SwingUtilities.invokeLater(new Runnable() {
public void run() {
//Turn off metal's use of bold fonts
createAndShowGUI();
}bye ale -
Target file of the same name as source file
Hi,
I am working on a file to file scenario. I need the target file name to be same as the source file name.
I checked the adapter specific message attributes in the sender as well as receiver file adapter,and also checked the file name.
Now am using variable substitution for the file name in the receiver file adapter.
I defined the variable value as :
message:FileName
But no file is getting created in the destination folder.
Can anyone help me out with this.
Thanks and regards,
Pravesh Puria.Pravesh,
If you have selected File adapter --> Adapter Specfic Attribuest --> File name in the sender and receiver file adapter , then do not go for variable name substittutuion.
Just make a dummy file name in the receiver file adapter for the file name field and XI will automatically use the same file name as the source when creating the file.
Regards,
Bhavesh -
File upload fails if name of the file is in Japanese
Hi all,
I posted this message before, but could not get any response. So posting again.
In my JSP app, I am using the latest MultipartRequest class to develop the file upload functinality through a form. Till now I was using MultipartRequest old release which was working fine for files names in English. But the new one supports international languages and therefore I am trying to use that to upload files named in Japanese. But it fails.
Worse part is I dont get any error. But the file never reaches the desired location. I am trying to print the filenames in different Java methods just to see the progress, and I can see all the filenames/paths printed right. But the file never gets uploaded.
Any hints?
m_asuAfternoon!
I had successfully done the same work . Besides Japanese filename, Korean and Chinese filenames are running ok.
you should check following points:
1. jsp's content-type:
<META http-equiv=Content-Type content="text/html;charset=shift_jis">
2. form's type:
<form method="POST" name="aaaa" enctype="multipart/form-data" action = "MyServlet">
if both points are right, perhaps you should download a new release of uploading file from http://www.servlets.com
Maybe you are looking for
-
How can I determine which programs/files are using disc space?
A question for the professionals: What program on my MacBook Pro can I run to determine which programs and files are taking up the percentage of disc space? I am running at 72 gb, which is great, but I need to know what is using up the rest of it.
-
Help me out here guys!
-
How do I share music between different accounts on a single Mac?
I've placed my iTunes folder in the shared users folder and then pointed all users to that folder... but none of the other users are able to see the music. How can I have all users on the same computer using the same iTunes music folder?
-
Why is app store and itunes unavailable?
-
Flex session replication among cluster Help needed!
Hi, I'am using Flex 3, LiceCycle Data Service 2.5.1, JBoss 4.2.1 in a web application. Our JBoss servers are in a cluster. We want to replicate Flex session among cluster, but it doesn't work. Did someone face issue with Flex session replication amon