Offline working with Discoverer Viewer 3i

I work with Discoverer 3i and I have a problem.
I can't save my pages (with Discoverer Viewer) in order to see
them offline.
Can you give me any solution???
Thanks

Hi Simon
That's really cool, although it is Discoverer 9.0.4, not 10.1.2.
For anyone who is interested, Oracle made a lot of changes between the 9.0.4 Viewer and the 10.1.2 Viewer, not least being the ability to send a report via email, to save a report, to pivot the data and to handle fine grained printing using PDF. You can also set up a corporate look and feel for 10.1.2 Viewer using the OEM interface.
With regards to the take up of Discoverer Viewer, most companies I work with are using it in a ratio of between 70:30 and 90:10 Viewer versus Plus.
Its a great tool for doing exactly what it says - viewing a report.
Best wishes
Michael

Similar Messages

Live sites with Discoverer Viewer

Is there a list of sites available in the Internet with Discoverer Viewer working ? I would like to see some real live experiences with Viewer.
thanks,

Hi Simon
That's really cool, although it is Discoverer 9.0.4, not 10.1.2.
For anyone who is interested, Oracle made a lot of changes between the 9.0.4 Viewer and the 10.1.2 Viewer, not least being the ability to send a report via email, to save a report, to pivot the data and to handle fine grained printing using PDF. You can also set up a corporate look and feel for 10.1.2 Viewer using the OEM interface.
With regards to the take up of Discoverer Viewer, most companies I work with are using it in a ratio of between 70:30 and 90:10 Viewer versus Plus.
Its a great tool for doing exactly what it says - viewing a report.
Best wishes
Michael

Workbook with Discoverer Viewer in Apps 11i?

With the help of (Doc ID: 278095.1) I was able to link Discoverer workbooks in Apps 11i. But all of my workbooks open with Discoverer Plus.
How do I open some of the workbook with Discoverer Viewer in Apps 11i?
I can open all my workbook directly with Discoverer Viewer without Apps 11i config.
Current Function Settings (in 11i) are:
Type: SSWA plsql function
HTML Call: OracleOASIS.RunDiscoverer
Thanks in advance for your help,

Hi,
Your workbooks are openned with viewer or plus depending on the profile 'ICX: Discoverer use Viewer'. You can override this by setting the viewer parameter on the call to OracleOASIS.RunDiscover. In the config of the Apps function that call OracleOASIS.RunDiscover, on the form tab add &VIEWER=Y or &VIEWER=N onto the end of the parameters. e.g workbook=myworkbook&parameters=param1~value1&viewer=Y
Hope that helps,
Rod West

Drill error with discoverer Viewer

Hi,
i'm not able to drill up and down with discoverer viewer.
I've the following error when i click on icon : Object doesn't support this property or method
I've read some notes on metalink and maybe a patch is applicable to fix my problem. But i'm lost.. i don't have any experience with oas administration !
Spécifications :
Browser ie 7.0 with OracleBI Discoverer 10g (10.1.2.2)
Hope my explication are clear !!
thx in advance for help..
Jeff
Edited by: [email protected] on 2009-09-18 09:49

Jeff,
To get the fix you have to: Bug number -5673463
(a) Apply the 10.1.2.2 patch - you can get this on Metalink (4960210). It is a big patch (over 1 and half GB in size) and will upgrade your app server.
(b) Then apply the IE7 patch from Metalink (5758865).
Hope this will help

Report not working in Discoverer Viewer

Hi,
I'm using Discoverer 10.1.2.1 in conjunction with E-business Suite 12.1.3.
I have a report that runs fine in Desktop or Plus, but when run in viewer (either from the application or from the stand-alone viewer link) it ends with the following error after running for approx 4 minutes:
The application encountered an invalid state.
OracleBI Discoverer Viewer was unable to find the necessary data for displaying the results of this event. Please correct any errors and try again.
I recreated the report from scratch, using the same underlying data, and adding exactly the same items, conditions and sorting. The same responsibilities have been given access, and I verified that the SQL produced in both reports is exactly the same.
However my new report works! From what I can see the only difference is the name and workbook identifier.
Does anyone have any idea what could be causing my error? I have searched for the error on this forum and others but haven't found the answer.
Thanks
Hazel

Hi Hazel
This has come up before and I found this thread that I was involved in several years ago: https://forums.oracle.com/message/3682002
Here's another one, this time relating to static IP addresses: https://forums.oracle.com/message/1199457
There's also a document on Oracle Support: The application encountered invalid state.Oracle BI Discoverer Viewer was unable to find the necessary data for displaying the results of this event" (Doc ID 884965.1)
Also, were you using Portal? I've seen instances where Viewer was unable to run a report that was linked via Portal because the report had changed since it was placed on the Portal.
Best wishes
Michael

Can't see Manage Link to work with tables views and links

I have an Azure account linked to Office365, and a Pay as you go subscription; and have been working with SQL for a few months without any problem.    I wanted to move one of my databases to my own Azure account (not tied to our O365)
so I get a free trial, and then converted that to paid with my credit card.   I had someone help me move the database, but now when I look at it in the new account there is no "Manage" link at the bottom to open and see the tables, fields,
views, etc.     I don't understand why that isn't there. I can copy, delete, all sorts of things.   But I can't "manage".    any ideas would be greatly appreciated.

I checked with a college and he pointed me to another post on the same topic:
Clicking the ‘Manage’ button in Azure Management portal launches the SQL Azure Management (SilverLight) Portal in a new tab in the browser. At this time, we do not plan to support this SilverLight-based SQL Azure Management Portal with V12 databases and
servers.
We are working hard on an HTML-based T-SQL editor experience that will deeply integrate with the preview Azure Management Portal. Until then, we encourage customers to use Visual Studio Community 2013 which is a full-featured free version of Visual Studio
2013 to connect to Azure SQL databases for tasks such as running T-SQL, designing schema and for offline and online database development.
You can click the the ‘Open in Visual Studio’ in the database page in the Azure Management portal to launch VS2013 on your computer and easily connect to your SQL Database.
In addition, you can also use SQL Server Management Studio 2014 with CU6 to connect to Azure SQL Database. More details are on this blog post.
This posting is provided "AS IS" with no warranties, and confers no rights
I hope that helps,
Jan

Strane Issue with Discoverer Viewer

Hi All
I Created a report in doscoverer plus (OracleBI Discoverer 10g (10.1.2.2)). I have a page item LOCATION and in the drop down box i have four locations LOCATION 1,LOCATION 2,LOCATION 3,LOCATION 4. In discoverer plus the page items are working just fine, whenever i select a location from the page item it gives me the report based on my selection. The problem is when i look at the report in Discoverer Viewer and try to select a different location (other than the default which is LOCATION 1), for some reason it doessn't select a different location but just shows the default. Once i logout and log back in into the viewer it works fine again. Can anyone please tell me whats causing this?
Thanks

What browser are you using and have you tried a different browser?

Problems with Discoverer Viewer and the printable page

Hi,
I have a problem in Discoverer Viewer. I run a workbook, see the results and I click on "Printable Page". I set the page setup options to "Portait" and "100% scale". I preview the workbook in a PDF file and it's ok, I see the results in "Portait" and "100%".
I close the PDF file and I click again on the "Printable Page". This time, I set the workbook to "Landscape" and "20% scale". I preview the workbook in a PDF file and it's NOT ok, the results are still in "Portait" and "100%". And the date/time in the workbook is the time when I run the workbook the first time. So, it's seems like a browser cache problem. The problem repeats until I clear the brower cache. At that moment, the workbook will take the page setup that I set at this time. However, it will be the same workbook with the same results until I clear the cache once again.
If I save the PDF file on my Windows Desktop and I overwrite it each time, it's ok.
Can somebody help me on this??
Thank you!
Mathieu

Hi Michael,
I'm clearing the browser cache by going in Tools -> Internet Options. In the "General" tab, I click on the "Delete files..." in the "Temporary Internet Files" section" (middle of the window).
But I don't indicate that Discoverer is saving my printable page changes. I say that the first time I run a workbook, Discoverer saves it (the results) in the "Temporary Internet Files" folder in a PDF file. Each time I run the same workbook after that, Discoverer don't overwrite the file in the "Temporary Internet Files" folder. He takes the PDF file that is already there and show it to me. So, the results are the same even if the data has changed. It does this until I clear the browser cache (it deletes the PDF file in the "Temporary Internet Files" folder).
Do you understand?
Regards,
Mathieu

Working with Table views

Hi Experts,
I have created a view with table view. I have created the context node and mentioned the internal table to read the data from DB tables. I am filling my internal table and unable to bind the internal table data to table view. Please help me
Regards,
Anand

Hi Ashish,
Thanks for the reply. The issue is
1. I have created a new view with table view
2. Created the controller class for the view
3. Created the context node and iterator
4. In the Create context node method, I am reading the DB tables and filling my internal table.
5. Here we need to Bind the internal table data to Contextnode/Table. Please help me in this.
6. After Data binding, then I have to call typed_context->contextnode->build_table().
the view code is
   <crmic:tableView id="tv1"
                     navigationMode   ="BYPAGE"
                     table            ="//LnkObjIBaseList/Table"
                     onRowSelection   ="select"
                     selectedRowIndex ="<%=LnkObjIBaseList->SELECTED_INDEX%>"
                     selectedRowIndexTable="<%=LnkObjIBaseList->SELECTION_TAB%>"
                     selectionMode    ="SINGLESELECT"
                     visibleRowCount ="6"
                     fillUpEmptyRows = "TRUE"
                     width            ="100%"
                     iterator = "<%= LnkObjIBaseList->iterator %>">
Some where I am missing to bind the internal table data to the wrapper class
Regards,
Anand

Java 7 Update 51 is not working with Discoverer

We are unable to get Discoverer Plus to load with Java 7 Update 51, does anybody know of a fix for this?
We are on Discoverer Plus Version 11.1.1.6.0
Thanks

Hi,
same issue here. Installed JRE 7u51 on local client and when trying to use Discoverer Plus (11.1.1.7.0) i get the following SecurityException message:
"Missing required Permission manifest attribute in main jar:
http://url:port/discoverer/plus_files/disco5i.jarjar"
I have installed the Jan-2014 CPUs on the server for WebLogic 10.3.6 (patch 17572726) and Discoverer 11.1.1.7.0 (patches 17617649 and 17664563) as i thought Oracle would deliver a new and correctly signed disco5i.jarjar file but the error is still shown.
Edit: After going through MOS i have found the following notes:
* Using Java 7 Unable To Launch Discoverer Plus from -or- With Another Java Application Running (Doc ID 1574749.1)
* Missing Attributes Warning While Launching Discoverer Plus Using Java 7u25+ (Doc ID 1596541.1)
I then installed the mentioned patches 17303613 and 17295586 (delivers new disco5i.jarjar but only 11.1.1.7.0) on the server and the issue is resolved. At least for Discoverer Plus 11.1.1.7.0.

Help with discoverer viewer tables

Hi
I have a oracle table which has some blank cells which oracle discoverer shows as null, thats fine although i wish it wouldn't show but i can live with that, the problem is can i exclude the null count when calculating percentages ?
thanks
nimesh

Hi
You can change how the NULL shows up in your sheets, if you go into Tools, Options, Sheet and at the bottom there is an option Show Null values as.....
Or on an existing report right click on the table and choose Format Table (or Crosstab) and set the NULL value option in there....
Can you give us more info on what you mean by excluding nulls from a count....because if it's what i think it is then you can do a case statement.....
MF

Problem working with deployed View Object

Hi everyone,
I have developed and deployed the BC4J project. And now I'm writting the client code.
Connecting to deployed components and then to the database is successfull.
calling method ViewObject vb = applicationModule.findViewObject("ViewObject") also completes successfully. and then calling the method
vb.first() ends up with the following error:
java.lang.ClassNotFoundException: oracle.jbo.domain.Number
java.lang.Object java.io.ObjectInputStream.readObject(boolean)
java.lang.Object java.io.ObjectInputStream.readObject()
void oracle.jbo.common.PiggybackInput.<init>(oracle.jbo.common.ObjectMarshaller, byte[])
void oracle.jbo.client.remote.ApplicationModuleImpl.processPiggyback(byte[])
int oracle.jbo.client.remote.ApplicationModuleImpl.syncIterator(int, int, int, boolean, boolean)
int oracle.jbo.client.remote.RowSetIteratorImpl.syncIterator(int, int, boolean)
oracle.jbo.Row oracle.jbo.client.remote.RowSetIteratorImpl.first()
oracle.jbo.Row oracle.jbo.client.remote.RowSetImpl.first()
oracle.jbo.Row oracle.jbo.client.remote.ViewUsageImpl.first()
void tester.BC4J_Client_test.main(java.lang.String[])
Error: oracle.jbo.PiggybackException: JBO-28300: Piggyback read error
oracle.jbo.PiggybackException: JBO-28300: Piggyback read error
void oracle.jbo.client.remote.ApplicationModuleImpl.processPiggyback(byte[])
int oracle.jbo.client.remote.ApplicationModuleImpl.syncIterator(int, int, int, boolean, boolean)
int oracle.jbo.client.remote.RowSetIteratorImpl.syncIterator(int, int, boolean)
oracle.jbo.Row oracle.jbo.client.remote.RowSetIteratorImpl.first()
oracle.jbo.Row oracle.jbo.client.remote.RowSetImpl.first()
oracle.jbo.Row oracle.jbo.client.remote.ViewUsageImpl.first()
void tester.BC4J_Client_test.main(java.lang.String[])
Can anyone help me, please!
Thanks ahead,
Eka

Hi,
You need to use :
vb.getRowSet().first()
null

All videos like in youtube work with green view every video is green when I lunch it

When I tries to show video in any web site it being green while this problem does not face me when I try another browser

Try disabling hardware acceleration in your Flash Player display settings
<img src="https://support.mozilla.com/img/wiki_up/fpSettings1.PNG">
....you can follow the same instructions as given here:
*[[Cannot view full screen Flash videos]]
Ref:
*http://kb.mozillazine.org/Flash#Performance_or_display_issues_with_certain_Flash_videos

Discoverer 4i not working with Sun JRE plugin

Hi All,
Recently i replaced jinitiator with Sun JRE plugin, after the deployment of the plugins the discoverer is not launching from the form based responsibility.
Its displaying on window as
Applet oracle.disco.DiscoApplet notinited
But i see the document 290807.1 for deployment of Sun JRE its no where mentioned that 4i will not Support Sun JRE plugins.
Any inputs are appreciated
Thanks in advance.

Hi,
You can upgrade to Discoverer 10g (10.1.2.3).
Note: 313418.1 - Using Discoverer 10.1.2 with Oracle E-Business Suite 11i
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=313418.1
Note: 459344.1 - What JRE Client Works With Discoverer 10.1.2 and e-Business Suite 11.5.10.2?
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=459344.1
Note: 367389.1 - Recommended Patch for Discoverer 10g (10.1.2.1 / 10.1.2.0.2) Plus Known Issues
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=367389.1
If you are not planning to use Oracle AS 10g features (like Discoverer Connection Management, Discoverer Portlet Provider, and Oracle Single Sign On, ..etc), you can choose to install Oracle Business Intelligence Server 10g Release 2. Oracle Business Intelligence Server 10g Release 2 is available on a separate standalone CD and includes Discoverer Server 10g, Discoverer Plus 10g, and Discoverer Viewer 10g.
Regards,
Hussein

Can Live View work with password protected pages?

I tried to open a page in Live View that when opened in a regular browser would bring up a login prompt (We use Siteminder based on realms). So the realm is protected and it should prompt me for a username and password. But in Live View I don't get the username/password prompt, I just get a 401 Access Denied error. Can this work with Live View?

Here's the FAQ about password protecting directories at 1&1 :
http://faq.1and1.com/webspace__access/protecteddirectories/index.html

Offline working with Discoverer Viewer 3i

Similar Messages

Maybe you are looking for