Offset account name not coming in G/L printout

Hi,
We have SBO 2005B PL25
in the G/L printout the offset acount code is coming through systm variable 74 but the acount name is not coming even after using system variable 415 please help with a workaround as we urgntly need the printed cash books
regards
Edited by: Philip Eller on Jul 7, 2008 9:25 AM

Pradipta Dasgupta,
You can print offset account name using
system variable no.415 using subsidary account option and
then select template
'General Ledger by posting date(system)'.
I checked it offset account name appears in print preview.
Jeyakanthan

Similar Messages

  • Offset Account Name fld blank

    Dear Experts,
    The offset account name field in General Ledger report of SBO is coming blank. Although the offset account code is coming properly. Can anybody explain if there is any reason?
    Thanks

    Dear Chandra,
    Please first have a check about the version and patch level of your Business One. According to SAP Note 1045356, since 2005A SP01 PL23, a new column for displaying the offset account name has been added to the General Ledger report to show account name. And the test result on 2005A SP01 PL45 is also fine. Please have a try.
    Regards,
    Canna Mu
    SAP Business One Forums Team

  • Offset account name for BP is missing in the general ledger report

    Hi all,
    while taking the ledger report of a cash account through General ledger report in the financials ,it is not showing the Business partner name ,it is only displaying the code.
    Regards,
    naresh k

    Hello,
    I am trying to get the "Offset Account Name" to print in the paper report. For the "on-screen" report it is displayed and can be toggled in the form settings, but this has no impact on the printable reports. I have looked all over trying to figure out an easy way to just add the data into the report, but for the built-in Crystal report, all the items come from the "PLD_Items" database. PLD_Items F_120 is the field for the Offset Account Code, but I don't know which one it is, if it's even there, for the description field.
    Short of writing an entirely new report, is there a way to add this field?
    Thank you.

  • Offset account name field in general ledger

    Hi,
           The 'offset account name' field is blank in the general ledger.If the  offset a/c is of any BP ,its getting displayed.But if its other than that its not displayed in the general ledger.
    Pls help.
    Thanks,
    Smitha
    Edited by: Philip Eller on Jun 6, 2008 9:18 AM

    Hi Smitha,
    Would you please first clarify the version and patch level of your Business One, as there is several enhancement in this area, please check SAP Note 1045356 and 1061715.
    Based on the testing in the latest version, Offset account name can be displayed correctly no matter it is account or BP.
    Regards,
    Canna Mu
    SAP Business One Forums Team

  • Offset Account Name

    Good day! I'm currently creating a general ledger-like report. I'm trying to display the Offset Account Name but I wasn't able to. Only the Offset Account Code is displayed. The tables I'm using are OJDT, JDT1, OCRD, OVPM, and VPM2. Also, how can I display the corresponding Outgoing Payments (OVPM) Document Number of a Journal Entry (OJDT) data.
    Thank you.

    Wrong forum

  • Data being Displayed while the Account Name not getting Displayed in FR

    Hi,
    We are facing a strange issue when is user is trying to run a Hyperion Financial report. The data and Entity Name is being displayed whereas the Account name is not being displayed for a particular entity. The user has access to the Entity and accounts. Any Clues ??
    Thanks,
    Addy
    Edited by: Addy on Jan 11, 2011 5:15 PM

    The first thing that pops to my mind is does the format of the cell have Replace checkbox checked with a blank description. thus any results coming back will display as blank.
    Also the customized header is check and it is showing blank.
    A quick test if you have Smart View is can the user access the same data? if yes then the report has a filter of some sort, if the user cannot access the data in smart view, there is a security problem perhaps with the data
    JTS

  • Cenvat clearing account is not coming in MIRO for Basic excise

    Dear sir,
    I have created the PO  . After that  i did GR for same at that I capture excise invocie& post it.
    Accounting document is created for the same
    here is accounting enrtry
            cenvat Basic = 100 debit
            cenvat edu cess = 2 debit
           Cenvat Higher Ecess =1 debit.
       Cenvat clearing account = 103 credit
    when i go the miro
    after simulating in miro i found
    cenvat clearing account = 2 debit
    but it should be 103 debit
    why this is coming please help me...

    Hi,
    Generally it happens if CENVAT Clearing Account in not assigned in OB40 to the Tax Account Keys. But, as per you it has been maintained. So the following if you are using Tax Procedure TAXINN;
    SPRO > Logistics - General > Tax on Goods Movements > India > Basic Settings > Determination of Excise Duty > Condition-Based Excise Determination > Classify Condition Types

  • Account name not showing in 'Partners' Block for sold to party and ship to

    Hi Experts,
    I created a return order by confirming the Account.
    Under 'Partners' Sold-to-party, ship-to-party, activity partner showing the account name but when i clicked on any of these links it is not showing the BP name.
    Please suggest why it is not showing the BP name inside the sold-to-party,ship-to-party, activity partner.
    Thanks in Advance,
    Kishore

    Hi Experts,
    I created a return order by confirming the Account.
    Under 'Partners' Sold-to-party, ship-to-party, activity partner showing the account name but when i clicked on any of these links it is not showing the BP name.
    Please suggest why it is not showing the BP name inside the sold-to-party,ship-to-party, activity partner.
    Thanks in Advance,
    Kishore

  • KSB1 field GKONT Offsetting Account Number not correct

    Hi experts,
    When I look at the KSB1 report, it seems that for some account, I have the wrong information in the column Offsetting Account Number.
    When it's an invoice, it's OK, it takes the supplier.
    If it is an asset operations (depreciation for example), the account in this column is not correct.
    The help for the field is:
    In this field, the system determines the offsetting account for the item, as long as the account is maintained in the corresponding account assignment.
    But i don't understand and have no idea where i have to maintain this....
    Someone could help me please?
    Thanks in advance,
    Chris

    Hello Chris,
    Note 39955 describes 2 algorithms for determining the offsetting account
    both of these are based on wether the largest amount is posted on the
    debit or credit side which determines the offsetting account.
    The offsetting accounts are determined on the basis of the FI dodument.
    Unfortunately, in standard there is no way to change the logic
    described in note 39955.
    However, for future postings, you would have influence in how the
    offsetting account will be set. This could be done with an FI exit
    as described in detail in note 354529. The corresponding correction
    instructuctions are already in your system but you would have to
    create the logic you want in the exit.
    Please check note 365478 too.
    br, Guido

  • Partner role- Goods supplier name not coming in MIGO

    Hi,
    While configuring partner roles i did all settings ...in PO i am giving my goods supplier name in partner tab ...now when i am doing MIGO that supplier name is not coming in the screen..
    What can be the reason?
    Utsav

    Hi,
    Re:
    What else to check? Are you using partner role GS for your goods supplier? Has the GS vendor master the name of the goods supplier in Name 1 field?
    Yes i am using partner role in goods suppler....
    Yes  the GS vendor master the name of the goods supplier in Name 1 field..
    I created 1 venodr  Main Vendor V1 through XK01..
    I created another vendor as Goods Supplier V2 through XK01..
    Now i went in XK02, in Vendor V1 under partner roles, i mentioned Goods Supplier as V2...
    Now i am creating PO against main  Vendor  V1...Under partner tab Goods supplier V2 is coming from Vendor master..That is correct...
    Now when i am doing GRN for above PO, there i am not getting my Goods supplier name...
    Utsav

  • Reply Defaults to Account Name Not Alias

    When I reply to a message, my email defaults to my account name rather than the alias the origanal message was sent to. Is there a setting I can use to fix this? Does this happen to everyone? Thanks.  - Fabini
    P.S. If this has been addressed in another thread, please point me to it. Thanks again. -F

    From Mail help:
    About the From address in your messages
    When you compose a message, Mail determines the address to use in the From field based on the “Send new messages from” option in the Composing pane of Mail preferences.
    When you reply to a message, Mail determines the address to use in the From field in this order:
    The To and Cc fields of the original message are compared to email addresses you have set up in Mail preferences, and the first matching address is used.
    Mail uses the email address for the first account listed in the Accounts pane of Mail preferences.
    You can choose a different address to use in the New Message window.
    Regards,
    Colin R.

  • Delivery date is not coming properly in PO Printout

    Hi,
    I have a problem in PO Printout that Delivery date is not coming properlyu2026In my PO, there are 5 line items. 
    If the Delivery date of all line items are same like 01.04.2009, then Delivery date should be shown 01.04.2009 in PO printout.. IT IS COMING RIGHT.
    But if the Delivery Date of all line items are different like 01.04.2009, 02.04.2009, 03.04.2009, 04.04.2009 and 05.04.2009. Then Delivery Date should be shown with the each line items in PO print out. THIS IS NOT SHOWING IN MY PO PRINT OUT.
    Please tell me what is the problem. Why not coming Delivery date with each line items???
    Regardsu2026

    currently i dont have SAP installed with this system, so i just suggesting you some thing.
    goto tcode: nace.
    select your output type. check the processing routines. check the smartform and processing routines attached to it. and see how the field is getting populated and what fields are being passed there.

  • Vendor account details not coming in MKVZ

    I Created one vendor account through transaction Fk01, but when i go to transaction MKVZ to see all details of vendor created by me , it shows the vendor name in F4 help, but does not show me any details.
    Can anybody please tell me whats the problem.

    Hi,
    U will get list of vendor created centraly ie xk01 by linking MM ie field like tick gr based invoice verification etc. U will find it in MKVZ
    Otherwise if u r creted with tcode fk01 it should be extended to MM then only u will able to see it in MKVZ.
    Regards
    Pari

  • Variable name not coming in the alert message

    Hi All,
    Reference with blog <u>/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
    My problem is alert message not showing the variables value.Alert will generated properly but variable like "SXMS_ERROR_CAT, SXMS_ERROR_CODE" not showing in the alert messages.
    My scenario is if sender or receiver adapter has wrong server name then the alert will triggered.
    Regards,
    Samarjit

    Hi,
    SXMS_ERROR_CAT and SXMS_ERROR_CODE are for Integration Engine alerts and will not be displayed for adapter Engine Alerts.
    For the adapter eingine alerts , you need to use, <b>
    SXMS_TO_ADAPTER_TYPE
    SXMS_TO_ADAPTER_ERRTXT</b>
    Regards
    Bhavesh

  • Burned DVD Name not coming up in player...

    When I burn a dvd with DVDSP I name the disc as well as nameing it ont he burnpage... but when I play it back in a dvd player the disc comes up Unknown dvd. Any thoughts? Usually they are dvd-9's burned onto tdk dual layer discs.

    I have never used DVDSP to burn discs, certainly the disc name appears when I use Toast-but the manual says this:
    ''each DVD disc you create is automatically given the same name as the
    project’s file, entered when you saved it. The disc’s name can be seen by the viewer when the finished DVD is played on a computer
    To name the disc in the Disc Inspector:
    1 Do one of the following:
    • Select the disc’s name (next to the disc icon) in the Outline tab.
    • Click an empty area in the Graphical tab.
    The Disc Inspector appears.
    Note: Choose View > Show Inspector if the Inspector is not visible.
    2 Enter the new name for the disc in the Name field at the top of the Disc Inspector, then press Return.''

Maybe you are looking for