Offset declaration too big for structure (unicode checks)

Has anyone worked with this user exit to Derive values for co/pa?
Enhancement COPA0001
Comp ZXKKEU11
I set up WA_CE1AWG1 as data: WA_CE1AWG1 like CE1AWG1.
and tried to copy I_COPA_ITEM to this variable
WA_CE1AWG1 = I_COPA_ITEM.
I get a runtime error Offset declaration too big for structure.
will I have to change program SAPLXKKE to remove unicode checks. Is there any other way to read in the fields from input structure I_COPA_ITEM?

hi
1.r u sure I_COPA_ITEM is structure or table.
2. if it is a struccture make sure the WA_CE1AWG1 and  I_COPA_ITEM are with same structures and types..
i think I_COPA_ITEM is table type --> to find it open in debugging mode then try to resolve.
Please Close this thread.. when u r problem is solved
Reward if Helpful
Regards
Naresh Reddy K

Similar Messages

  • When I open my iPad the page is too big for the screen and won't shrink down. The keypad has also become very 'sticky'

    Recently when I open any apps the pages are too big for the screen. They shrink when pinched but immediately become bigger again. It's very difficult to scroll too. The keypad has become very sticky. Missing letters and spaces when I type and needing to tap the keys much harder than usual

    I have the exact same problem, I think.  I was on my iPad 3's home page swiping R-L to locate a certain icon when all of a sudden the screen appeared to get HUGE.  So big I could only see one or two icons.  I couldn't even turn it off to try a reboot because after I pushed the sleep/wake button, I couldn't find the red slide bar.  I finally just had to wait for the battery to die, then recharge it, and it looked normal again.  I also spoke with several friends who haven either iPads or iPhones, and they've all had this happen to them.  I checked my accessibility settings, and Zoom was already off.  So what is causing this problem for so many people, and what can we do to prevent it?  Please help.

  • ODI-40406: Bytes are too big for array error

    Hello ,
    I am trying to load a flat file from a table. I am working on ODI 11G.
    Following are performed.
    Staging area different from SOurce is checked.
    IKM used is : IKM SQL to File Append
    Truncate is True
    No LKM is used.
    I am getting following error:
    java.lang.IllegalArgumentException: ODI-40406: Bytes are too big for array
    create header (RECORDTYPE,
    ASSIGN_NUM,
    USR_ID,
    START_TIME,
    JOBCODEID,
    AISLE_AREA_ID,
    PLANE_DATE,
    CLIENT_ID,
    CSTNUM,
    WH_ID)
    /*$$SNPS_START_KEYSNP$CRDWG_TABLESNP$CRTABLE_NAME=UNITIME TO RPSNP$CRLOAD_FILE=C:\Program Files\ODI_BI_APPS/UNITIME TO RP.txtSNP$CRFILE_FORMAT=FSNP$CRFILE_SEP_FIELD=0x0009SNP$CRFILE_SEP_LINE=0x000D0x000ASNP$CRFILE_FIRST_ROW=0SNP$CRFILE_ENC_FIELD=SNP$CRFILE_DEC_SEP=SNP$CRSNP$CRDWG_COLSNP

    There is a possibility of mismatch of datatype, that can cause the problem.
    Say in ODI model, you have defined a 'Date type' field to be stored as 'String' however at the time of mapping in 'Interface', no conversion happens (from date to string)  for this particular object. This causes the problem.
    The original query remains valid at DB side (fires for datetype) however fails while integrating (anticipating String which may be longer than defined in modelbecause of your NLS setting in DB). Therefore the best way would be to apply conversion for that particular field (in this case, use TO_CHAR(Date type,'Desired Date Format').

  • My CS3/PS has started to change the cursor into a line of three VERY small icons when dragged over a picture or menu. Thus it is VERY difficult for instance to drag a layer in the layer list to the wastebasket - the cursor simply is too big for the waiste

    My CS3/PS has started to change the cursor into a line of three VERY small icons when dragged over a picture or menu. Thus it is VERY difficult for instance to drag a layer in the layer list to the wastebasket - the cursor simply is too big for the waistebasket icon. Even all other exact work is impossible.  Of course I have checked all the cursor presets but nothing seems to help. My OS is Windows7.

    Have you tried resetting Preferences?
    A logical next step would be to reset your Preferences.
    To reset Preferences:
    If Photoshop is already open on your screen, close it (Quit). Then hold down Shift+Ctrl+Alt (Win) / Shift+Command+Option (Mac) on your keyboard and start Photoshop.
    A dialog box will pop up asking if you want to delete the existing Preferences file (the "Settings"). Click Yes in the dialog box. The existing Preferences file will be scrapped and a new one will be created.

  • Desktop is too big for the display

    Some how this morning while on my Mac a display setting or something was changed. If your on the desktop, with all windows closed, the background, icons, dock.....everything is too big for the display. If you move the cursor all the way to left it will 'slide' the desktop in that direction. Move it all the way to the right edge of the display and it 'slides' the desktop to the right until you reach the edge. Also the same for the up or down directions.
    At first I thought it had something to do with the multi-touch track pad, but I don't think so. I have checked all the display settings I can think of and have tried re-sizing the desktop to all other settings in an attempt to fix the problem. Additionally I have restarted/shutdown the computer totally to see if it would fix the issue. No success. Please help.
    Thx,
    Audioboy

    I had the same problem, but the zoom was already off. So I went under "options" and unchecked "use scroll wheel with modifier keys to zoom," and that took care of it.
    Thought that might help some others who find this thread.

  • I have my iTunes library on an external HD because it is too big for my iMAC 500GB HD. I want to backup my external HD. Can I do this with any Apple cloud product or should I look elsewhere? Also is it worth just buying another external HD to back up

    I have my iTunes library on an external HD because it is too big for my iMAC 500GB HD. However, it is not backed up, so I need a solution to backup my external HD. Can I do this with any Apple cloud product or should I look elsewhere for cloud products? Will it be cheaper/easier just to buy another external HD to back up my existing external HD? Thanks

    I don't know if this is me adding files to iTunes when the external wasn't connected
    it is.
    is it OK to just keep deleting that library on the Air?
    i wouldn't - at least not until i
    mount the external
    point iTunes media folder location back to the external via preferences > advanced
    consolidate my library via file > library > organize library
    The ntfs hasn't seem to be causing any problems, but I've always wanted to know.
    in order for your Mac to write to NTFS drives, it needs some help by installing e.g. the NTFS 3G driver. apparently that or something similar is installed on your Mac already. preferably, it would be formatted for Mac but then windows machines would need to have e.g. MacDrive installed to recognize the drive.

  • Why does is say purchaseable items too big for download every time I try to download an app?

    Every time I try to download a game or app my iPhone says error message purchasable items too big for download. I even changed my billon information. Anyone know what the problem might be?

    Connect your iPad to iTunes on your Mac/PC and then go to your iPad's summary window. Then click back up if you want to back up your iPad first. After that click restore. Later it will ask you if you want to setup the iPad as a new iPad. Select the option to setup your iPad with your latest back up.

  • A document page opens that is too big for the display and runs off the end of the monitor

    How do you fix a problem where document pages open that are too big for the display and runs off the end of the monitor? The borders are off the monitor so there is no window edge to grab and adjust.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and  Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Sim card too big for ipad air?

    i have taken delivery today of a new ipad air but even the mini simcard seems too big for the holder, is it safe to still put it in?

    No. The iPad Air uses a Nano Sim. A Mini sim will not fit in the tray.
    You need to talk to your Cellular carrier and have them give you a nano sim for the new iPad.

  • My iPad standard window is bit too big for the screen.

    My iPad screen unexpectedly got slightly too big for the display window. The size is bit too big. For example, the keyboard when it pops up does not fully display all tkey sans. Another example is the time/power remaining bar slips out of sight.  Did I accidentally change something?  Is this an issue with version of iOS that I am using (4.3.3)? (Note I'm not talking about resizing by using your fingers.)

    John,
    I am having the same problem.  The enlargement is not the same as the 3 finger tap or the 2 finger zoom.  The screen opens and then bumps to a slightly larger screen just enough to make it too big to see the outer edges.  You can put 3 fingers on the screen and move the screen to see the edges but you cannot get it to shrink to the correct size.  This is the second time this has happened to me.  I am also having some other issues.  Sometimes while in an app the app will close and I will be diverted to the home screen.  And sometimes when playing "with Friends games" the letters on the letterboard (not the key pad) disappear, will not move or are giant.  I plan on taking it back to the Apple store this week but I hate the idea of having to start over.

  • 720p display resolution is too big for tv

    I recently got the kanex hdmi adapter to hook my mbp to my tv. The quality is superb and sound is good as well. However, the picture is slightly too big for my size of television. I had to select the 720p option so that my tv could recognize my computer and therefore, I cannot select any other option if I want my tv to recognize my computer via hdmi. Is there any possible way to still be able to hook my computer with my kanex adapter and still be able to fit the full picture on my tv screen?

    Not sure if you fixed this problem but my Sanyo has a Pixel shape button that I accidentally pressed somehow. Somewhere in your T.V. remote or menu should have the same type of button or menu option to change the way your pixels are layed out.
    This option will give you a 4x3 option, a 16:9 option and a few 16:9 zoomed variants.
    It's probably not in your OS X settings. You have accidentally switched your pixel shapes.

  • NB305 first time setup display too big for screen

    I just bought an NB305-310 netbook  (two, actually, and the first one had no trouble). It came loaded with Windows XP.  When I turned it on I wasn't able to set it up right away, when I came back to it, I found the display of the welcome screens and the setup process assistant is too big for the screen, as if it thinks it has to fill a 15" or 17" screen instead of 10".  So I can't see to click on the "I agree" box or the "Next" button etc., so can't proceed through the setup.
    I already tried restarting it a couple times (by holding down the power key, since Control-Alt-Delete didn't do anything).  I also tried using the function key with various keys that looked like they might affect display size but no change.  Even the volume function keys didn't change the volume of the setup background music that plays.
    How can I fix this?
    Thank you!
    RD

    mini notebook NB305-N310 
    Try this. Press Alt + Spacebar to open the control menu (which may be off the screen) at the top-left of a window.
    Then press M (for Move).
    That will enable you to move the window using the arrow keys.
    When you get the chance, you'll want to go here and reset the screen resolution to 1024 x 600.
       Control Panel > Display > Settings tab > Screen resolution slider
    -Jerry

  • Scanned doc now too big for print

    Hi,
    I have scanned this sheet and modified it, now i need to print it back but photoshop says its too big for print.
    Indeed it just printed a portion of it.
    Can someone with experience of this kind of issue explain me the technicalities and what should i do?
    I know photoshop only when it comes to chop pictures, put loads of filters and make them jolly, i am not into stuffs like scan/sizing/printing, etc.,  so please don't explain to go down to the basic basics in your explanation.
    Thanks

    Well, when you say "Manufacturer's software" I assume you mean the scanner's software and NOT Photoshop.  It is best to scan directly into Photoshop by using the menu File>Acquire Image>[select your scanner source--either the scanner name or TWAIN driver].  When this is chosen your scanner's driver will launch a "plug-in" software interface that will allow you to scan the document and set a marquee around what you want to scan and also choose the resolution.  After that you will be able to save the document -- give it a unique name like "file.psd" -- and then make changes -- again give it a unique name like "file_edited.psd".   The document measurements you gave us seem to fit within the bounds of a United States (US) Letter size document which is 8.5 inches x 11 inches.  If your printer has the ability to print borderless documents you should be able to print this document without a problem with a resolution of 300dpi.  It is possible that it would not be able to if there is not enough memory on your printer and that is why you get the error message.  (But as a JPG image the file size will be compressed, so I'm not really sure why your document would be too large.)

  • HT2311 iTunes window too big for screen.

    My iTunes window is too big for screen.  I cannot access the shrink control on the lower fight corner of the screen.
    Any other ways to shrink the screen to fit?
    Bob

    Option-click the green button.
    (66562)

  • HDR window too big for screen

    When I open the "Merge to HDR Pro" dialog box, it is too big for the screen and I cannot resize it. Pressing the green + button just resizes the too big screen above my dock, but it is still too big for the options that lie at the bottom of the dialog box. How do I fix this?

    What is the screen resolution of your monitor?
    One workaround I've seen is:
    Hide your OS X dock
    Quit Photoshop
    Restore your prefs: http://adobe.ly/PS_Prefs
    Restart Photoshop

Maybe you are looking for