Offset not working for fiscal year variable 0P_FYEAR

Hello all,
I am working in G/L cube. I am getting total credit and total debit keyfigures from the cube.
I want values for 2 years side by side. So I am using 0P_FYEAR as varaible for the key figure and offsetting the other by -1 but for some reason the offset is not working. ?
If I run the query just for 2007 is get the values, if i run just for 2006 I see the values for but when I use the varaible and input the fiscal year as 2007 in varaible screen than I see the values only for 2007 and not for 2006 ?
The test data in cube is for 2006 and 2007
Why can that be ?
Any suggestions?

Hi KM
Thanks for your prompt reply.
I created another simple query with 2 RKF's, one RKF uses the user entered value ( 0) and onther RKF is offset to -1 and it is very straight forward query.
The second RKF query result came blank. Infact i tried with my own variable which i have created not SAP variable, but still no luck.
Do you have any thoughts.
Thanks for all your help.
Prasad

Similar Messages

  • Splitting is not working for fiscal year 2008

    hai experts,
    The splitting is not working for fiscal year 2008. This is critical for month end.
    pls explain me ful cycle and advise me what i have to do,
    thank you

    Hi
    Please check the documentation in the links below.
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/1c/2ed140ed61712ae10000000a155106/content.htm
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/87/3da04028f40160e10000000a1550b0/content.htm
    This gives yuo a brief on Document splitting. Please let me know if you need any further help. Please do award points if found useful.
    Karthik

  • SAP EXIT Variable 0FYEAR is not working for Fiscal Year(OFISCYEAR)

    Dear SDN,
    I have created Simple Query.
    ROWS
    Company code(0COMP_CODE)
    Fiscal Year(0FISCYEAR)
    Columns
    Total Debit postings(0DEBIT)
    Total Credit posting(0CREDIT)
    Filters
    Companycode(Variable Selection option)
    Fiscal year(Varialbe SAPEXIT 0FYEAR)
    Fiscal Year Variant(K4)
    After executing the query in the variable screen only company code is displayed.
    SAP EXIT FISCAL YEAR VARIALBE(0FYEAR) IS NOT WORKING.....
    Is there any setting or activation is required to use SAP EXITS?
    Waiting for Solution......
    Thanks & Regards,
    Praveen.K

    Hi
    In this case you will have to use a Customer Exit (which is Ready for Input) Variable which gets Current Fiscal Year as a Default Value.
    In order to do that - you will need to create a Customer Exit Variable which is Ready for Input. The Variable will have to be assigned with Current Fiscal Year under I_STEP 1 (this refers to the coding of the Customer Exit in T-code: CMOD)
    If you need any help with the coding - don't hesitate to ask.
    Yaniv

  • Version 0 is not defined for fiscal year 2012.

    Hello Experts,
    While am tring to release  a work order, i am getting the below error.
    Version 0 is not defined for fiscal year 2012.
    Message no. GP626
    Diagnosis
    The version 0 is not defined in controlling area DE06 for the fiscal year 2012.
    You have to maintain the fiscal year-dependent version parameters for all actual versions for which multiple valuation is updated.
    System Response
    The version 0 cannot be used for fiscal year 2012.
    Procedure
    Maintain the fiscal year-dependent version parameters for the version 0.
    Execute function
    By this what i understood is we need to change the Settings for each fiscal year for the version 0 in controlling area DE06.
    i.e. we need to add the fiscal year 2012 in that.
    Is this correct????
    If yes what will be the impact of adding 2012 in that screen?
    i think its a soft config only.
    Please let me know the correct process
    Thanks in Advance,
    Satya

    Version 0 is not defined for fiscal year 2015.
    What to do next ? Please help with it.

  • Error saying 'Posting period 000 is not defined for fiscal year variant K4'

    Hi All,
       When I try to add a new entry in the transaction OB52, I get an error message saying 'Posting period 000 is not defined for fiscal year variant K4'. The entry that I add is,
    Variant           :  0001
    Account Type: +
    From Period    : 1
    Year               : 1995
    To Period        : 12
    Year               : 2010
    From Period2  : 13
    Year               : 2000
    To period2      : 16
    Year               : 2010
    Please let me know what customising needs to be done to solve this issue.
    Thanks a ton.
    Best Regards,
    Jeff

    Hi,
    Hava you checked in OB52 screen, by default 0001 posting period variant will be there for +, A, D, K, S account types.
    If it is already existed in your OB52 screen, you won't create one more record with the same name. You have to edit the existing 0001 posting period with new values.
    Thanks
    Chandra

  • Error: "posting period is not defined for fiscal year variant" in  FBICS3

    Hi,
    I got error  "posting period is not defined for fiscal year variant" when I execute t code FBICS3.
    I checked in OB29 &  t code FBIC010 & noted that the fiscal year variant had ben maintained.
    Please advice.

    HI,
    It was noted that the mentioned t code had been maintain but below mentioned error appear:
    Posting period  is not defined for fiscal year variant
    Message no. GU506
    Diagnosis
    You have tried to determine a posting date in fiscal year variant for period , fiscal year , but this period is not defined for the variant.
    Procedure
    You maintain fiscal year variants in table T009.
    It was referring to t code OB29. I have checked the detail, in OB29 also details maintain.
    Please advice why the error still prompt.

  • Version  0 not defined for fiscal year...

    Dear Experts..
    Im trying to do an hiring action but system says Version  0 not defined for fiscal year...
    Could someone tell me wat could be the reason???
    Regards
    Shanthini

    Hi,
    Go to SPRO: Controlling -  General controlling - Org - Maintain versions
    On the right hand side select version 0 then select controlling area settings.
    Again select version 0 on the right hand side and select Settings for each fiscal year.
    Then maintain the settings for the relevant fiscal year.
    Regards,
    Dilek

  • Even genuine iphone 5 usb charging cable does not work for an year?

    I have bought an iphone 5 last year. With it, came the  original apple genuine iphone 5 lightning USB cable. It did not last for half year. I had to buy another original apple iphone 5 similar cable and it was gone within 3 months. I dont understand is it cable manufacturing problem? is apply selling fake cables? It is really annoying and I am really angry that such a reputed company cant give/ provide proper long lasting cables.
    My experience with these two genuine cables was that after some months of  usage, i used to observe even if its plugged it would not charge, or if you push it hard its charging. Firstly, I never keep my phone charging all time. Then how the hack can the charging cable die? or problem arise. I bought the phone and the charging cables when I was germany. I had to buy a 20 euro local companys USB charging cable after above two stopped working with no signs of damage. I have also tried cleaning the charging jack or socket where cable is inserted. It did not help. This local charging cable started to torn out automatically and it got fully damaged, Now I am in India, I bought another cable of 10 euros and it is just two days, it would not charge again.
    I am really furious now whether you use original or local USB cables they dont last for even a week? what the ****?
    Do I need to really pay for those portable charger with a big price tag, that my problem will be solved? very very upset. I never have any complaint with the phone, but the charging catastrophies, really ****** me off. I think of going back to other mobile brands like samsung or nokia where there is never a charging issue or battery drainage issue once you charge its goes for days or it  is also expensive buy a nokia or samsung charger if lose it or break it. but for iphones its really bugging situation and not just me many people around the world are having sick problem with iphone brand with charging ISSUES.
    APPLE PLEASE SORT THE PROBLEM OR SELL the PORTABLE IPHONE CHARGERS (WIRELESS) CHEAPER so that we dont have to use these silly little lightning cables. or I fear my APPLE I PHONE 5 is not genuine or its FAKE.
    PLEASE HELP>

    Look closely at the way you handle the cables. I have never had any cable, Apple or third-party, fail on me.

  • Delta Fail - Fiscal year variant FP is not maintained for fiscal year 2011

    Afternoon all,
    One of our overnight deltas failed with the error msg
    "Fiscal year variant FP is not maintained for calendar year 2011"
    I've since in SPRO under Maintain fiscal year variant created the correct entry for 2011 which mirrors the R3 source system. However when i run a repeat delta the same error occurs.
    Thinking i may have missed a setting i have since transferred the global settings for fiscal year variants from the source system in RSA1 and again ran a repeat delta...same error.
    On the advice from other threads in the forums i've checked in OB29 and it appears fine, and also checked tables T009 and T009b again without success.
    Does anyone know of anything else i can try?

    hi,
    hope run the delta after the attribute change run could solve the issue.
    hope u may have the below posts already if not chk out
    Fiscal variant maintence
    Maintaining Fiscal Variant Between R3 and BW
    Fiscal variant not maintained for Calender year
    Ramesh

  • Probe is not working for class with variable refnum

    I have a class whose purpose is to send data through a network stream. Its private data consists of an array of typedef clusters and a single variable refnum of the network stream writer. If I try to probe a wire whose data type is this class, it simply states "No Debug Info" and displays the private data grayed out without any data in it. The probes do not work in member VIs or non-member VIs. But if I remove the variable refnum, then the probe works fine and I can see the array of typedefs. If I unbundle the class and probe the array and refnum then the probes display the data correctly. 
    Why is the variable refnum in the private data breaking the class's probe? Is there a workaround other than unbundling and probing?

    Hello Arthur,
    Would you be able to attach the simplest version of a program that has this probe issue? This will help me troubleshoot a lot better. 
    Ben D.
    Applications Engineer
    National Instruments

  • Reg: FM - DATE_CONVERT_TO_FACTORYDATE not working for 2011

    Hi All,
    The FM - DATE_CONVERT_TO_FACTORYDATE was working correctly so long.
    This FM is not working for the year 2011 alone!!
    When i check the FM, it is actually a C module which is called and is not allowed for debugging.
    Can anyone help as to what could be the problem. Will some customizing solve the issue?
    Kindly help.
    Also let me know if there is an alternative FM for this DATE_CONVERT_TO_FACTORYDATE.
    Thanks in advance.
    Regards
    Shanthi

    Hi Shanti,
    see SAP Note 1529649: Factory Calendar expires 2010
    kind regards
    Paul Q

  • Bex Report for Fiscal year

    I have requirement like as below
    In my report selection screen there will be a variable for fiscal year variable is user input.
    in report column there is one KF that is a amount field.
    if user give some value range in the variable like 2005001 to 2005003
    he want to see the amount value for year to date
    like
                   2005001     2005002     2005003
                   1000.00     200.00     300.00
                   300     400     400
    if any one knows please glide me the steps
    how to display year to date value for each fiscal period as per user input in the variable selection.
    Thanks
    samit

    Hi,
    1) You will create a customer exist varible for FYP.
    2) You will also have a user entry varible for FYP to allow the user to enter his values for YTD.
    3) Write a code in CMOD for the customer exist YTD varible.
      if i_step = 2.
          read table i_t_var_range into loc_var_range with key vnam =  'user entry variable.
          year = loc_var_range-low+0(4) .
          period = loc_var_range-low+4(3).
          concatenate year 001 into l_s_range-low .
          concatenate year period into l_s_range-high .
          l_s_range-sign   = 'I'.
          l_s_range-opt    = 'BT'.
          append l_s_range to e_t_range.

  • Variable Offset for Fiscal Year Not Working

    Hello,
    My fiscal year variable offsets are not working. I have an input-ready query setup with 3 restricted key figures.
    1) Restricted by FY Variable 0P_FYEAR, 0VTYPE = 20, KF = 0QUANTITY
    2) Restricted by FY Variable 0P_FYEAR (variable offset -1), 0VTYPE = 20, KF =0QUANTITY
    3) Restricted by FY Variable 0P_FYEAR (Variable offset -2), 0VTYPE = 10, KF= 0QUANTITY
    I have in my filter selections Fiscal Year Variant = K4
    Rows have 0STKEYFIG
    Columns have 0FISCPER3 (Posting Period) and the 3 Restricted Key Figures.
    When I run the query, the offsets are not being accepted.  Only the selected FY variable.  The first and second restricted kfs show 2009 data and not 2009, 2008 as it should.  Has anyone else had issues with this?  I am not using 0FISCPER but 0FISCPER3 but I am not sure how that would make a differnce.
    I have created new variables, tried to do positive offsets, tried to include and exclude values int the filter to no avail.
    Thanks,
    Cherie

    I kept my variable offsets in the restricted key figure and they aren't working.  When I just put fiscal year in the column and put the 0P_FYEAR and 0P_FYEAR-1 I get the 2 columns and the offsets filter through just fine.  It seems to only be messing up when they are in the restricted key figures themselves.

  • Variable Offset not working in BI 7.0

    Hi ,
    I am facing an issue with variable offsets in queries in BI 7.0.
    I created simple keyfigures with variable offset for fiscal year period with -1,-2,-3...etc to show different periods but I am getting 0 values for the same.
    Just to inform, we are on SAP GUI 7.10 and support pack 0.Are thre any issues in variable offsets with front end patch ?
    If so, pls let me know.Pls also let me know if we need to apply any notes to resolve this issue.
    Regards,
    Kumar

    Hi Joke,
    Thanks for ur reply. I just now downloaded and installing and after that I will test the variable offsets.
    Wond,
    Just to tell you that variable offsets are not also working in the web.Let me install this patch and try one more time...
    Regards,
    Kumar

  • Custome variable exit for fiscal year/period

    Hello BW Gurus,
    Q1[1,2,3] Q2[4,5,6] Q3[7,8,9] Q4[10,11,12] quarterly periods
    I have a custom variable exit as shown for fiscal year period
           IF LOC_VAR_RANGE-LOW+4(3) =< '003'.
              L_S_RANGE-LOW+4(3) = '001'.
           ELSEIF LOC_VAR_RANGE-LOW+4(3) > '003' AND
                                              LOC_VAR_RANGE-LOW+4(3) =<'006'.
              L_S_RANGE-LOW+4(3) = '004'.
           ELSEIF LOC_VAR_RANGE-LOW+4(3) > '006' AND
                                                LOC_VAR_RANGE-LOW+4(3) =< '009'.
              L_S_RANGE-LOW+4(3) = '007'.
           ELSE.
              L_S_RANGE-LOW+4(3) = '010'.
           ENDIF.
    Now this works fine to give me the Current Quarter ....say if user puts 005/2007 i get the data Current quarter as [4+ 5] i.e. April and MAy data. Now for <b>Previous Period</b> I gave an offset as -3 to -1 inorder to get data for Q1[123] but the requirement is changed and I want the same time period i.e. [1+2] and not the entire quarter since the Current Quarter calculates only for 4 and 5.
    I hope u are getting my point....please give your suggestions will reciprocate with lots of points

    Hi gaurav,
    Basically If I am selecting period 005 I am getting the data for 4 and 5 as Current Quarter i.e. April is the starting period of that Q2.
    Similarly the previous Quarter should also give me data for period 1 and period 2.
    Right now the offset I gave is -3 to -1 on my custom variable so i am getting data for the entire previous quarter which is Q1[1,2,3] but in reality i just want data for period 1and period 2.
    Can you please help me in this
    Appreciate your concern
    Thanks

Maybe you are looking for