Offset not working on FiscalYr/Period

Hi All,
In the selection I am using a variable range From-To. If I am running the report for April 2009 in this column I should see data related to March 2009 and for this I set the offset on variable range for fiscalyr/period  to -1.
But when I run the report I see April data in the column instead of March data.
Can any one please help me with a solution?
Thanks
Prasad

Hi Prasad,
          Is the variable used for user entry in the selection screen used as a global filter ( i.e under list of Filters). If that is the case when you enter the fiscal period as Apr 2009 in the selection screen the entire query(all the columns in it) will first get restricted for Apr 2009.
          I suspect that this is what is happening with your query. To avoid this you should remove the variable from the filters tab and try to use it in column by way of a selection keyfigure so that the restriction applies to only that column locally and also enables you to enter fiscal period in the selection screen. and if you don't wnt to display this column you can hide it any way.
         Now to get march data, in another cloumn give a variable filter and give offsets here.
Hope this helps you.

Similar Messages

  • FIND with MATCH OFFSET not working

    Hi,
    I have a statement:
    FIND '/' IN <ls_data_package>-/bic/zbib_sysn MATCH OFFSET off2.
    this works in all the case except for when <ls_data_package>-/bic/zbib_sysn = SSULTANA-VMC/.
    (i.e. when /bic/zbib_sysn = USERID-VMC/, here SSULTANA is the user ID)
    *In this case off2 = .
    Value of sy-subrc is 0 after this statement is executed
    Can some one please point out what I am doing wrong.
    Thank you,
    CD
    Edited by: CSD . on Sep 26, 2008 9:53 PM

    >FIND with MATCH OFFSET not working  
    Most unlikely.  More likely is that it isn't doing what you think it should be doing.  Or you're using it incorrectly!
    I can't really follow what your problem is.  I assume you mean that you are getting off2 with value 0, when /bic/zbib_sysn contains USERID-VMC/
    Can you be a little clearer in what the issue is?
    DATA: off2 TYPE i.
    FIND '/' IN 'this string /' MATCH OFFSET off2.
    WRITE: / sy-subrc, off2.
    This little program returns 0 and 12 
    matt

  • My laptops QWERTY row of keys does not work for long periods at random intervals and only after pushing all the buttons on the row does it eventually turn back on and then will still cut out every now and again, anyone know how to solve this?

    My laptops QWERTY row of keys does not work for long periods at random intervals and only after pushing all the buttons on the row does it eventually turn back on and then will still cut out every now and again, anyone know how to solve this? If not is there any way to actually get a genuis appointment lol to get one of them to have a look at the hardware on the keyboard?

    Apple Support (formerly ExpressLane):
    https://getsupport.apple.com/GetproductgroupList.do
    https://getsupport.apple.com/GetSASO?SG=SG001&locale=en_US

  • Offset not working for fiscal year variable 0P_FYEAR

    Hello all,
    I am working in G/L cube. I am getting total credit and total debit keyfigures from the cube.
    I want values for 2 years side by side. So I am using 0P_FYEAR as varaible for the key figure and offsetting the other by -1 but for some reason the offset is not working. ?
    If I run the query just for 2007 is get the values, if i run just for 2006 I see the values for but when I use the varaible and input the fiscal year as 2007 in varaible screen than I see the values only for 2007 and not for 2006 ?
    The test data in cube is for 2006 and 2007
    Why can that be ?
    Any suggestions?

    Hi KM
    Thanks for your prompt reply.
    I created another simple query with 2 RKF's, one RKF uses the user entered value ( 0) and onther RKF is offset to -1 and it is very straight forward query.
    The second RKF query result came blank. Infact i tried with my own variable which i have created not SAP variable, but still no luck.
    Do you have any thoughts.
    Thanks for all your help.
    Prasad

  • Seek or start playback offset not working on big flv's

    Hello,
    I try to start a FLV (created with soundbooth cs5) at a certain point of time using ns.play('video', 33000) or even just ns.seek(33000);
    The FLV is about 9 hours long.
    How do I make this work ? And why is it not working?

    Do you face problem with all big flv files or just few set of files? Is it possible for you to pass on that files so that we can check at our end? But before you that - which version of FMS and Flash Player version are you on?

  • Offset not working with Interval Mandatory

    Hi,
    Does the offset function works with Interval Mandatory or do we have to use a customer exit ?

    A little bit more explanation on what is needed to achieve:
    Under the Rows - we would want to show Calendar Day
    and under the Columns we have 2 Restricted key figure - Open Dip and Closing Dip both using the same key figure.
    Opening Dip is the closing dip of the previous day. How can this be done ?
    Calendar Day   Opening Dip   Closing Dip
    01.01.2011       10                   20
    02.01.2011       20                   30
    03.01.2011       30                   40

  • Variable Offset not working in BI 7.0

    Hi ,
    I am facing an issue with variable offsets in queries in BI 7.0.
    I created simple keyfigures with variable offset for fiscal year period with -1,-2,-3...etc to show different periods but I am getting 0 values for the same.
    Just to inform, we are on SAP GUI 7.10 and support pack 0.Are thre any issues in variable offsets with front end patch ?
    If so, pls let me know.Pls also let me know if we need to apply any notes to resolve this issue.
    Regards,
    Kumar

    Hi Joke,
    Thanks for ur reply. I just now downloaded and installing and after that I will test the variable offsets.
    Wond,
    Just to tell you that variable offsets are not also working in the web.Let me install this patch and try one more time...
    Regards,
    Kumar

  • Variable offset not working

    Hello Experts -
    I have a structure and a variable with single-value entry. The variable is on 0CALMONTH.
    If user input 06/2007, I wanted to see information for 06/2007, 05/2007, 04/2007. I'm using a variable offset. But my report output is always for 06/2007. I have data for 05/2007 and 04/2007 also.
    In the column header, it shows 04/2007, 05/2007 and 06/2007 but there's not data.
    Can someone please help me with this? What am I doing wrong?

    If you can see the offset result in header then it will surely work for data also.
    If u have a key figure amount.
    Then you need to restrict this figure for user inputed months variable - offset.  i.e different restricted figures for different months.
    I hope this is clear to you, if not then do let me know.
    Thanks
    Dipika

  • Filter Between in QAAWS not working correctly for period, how to resolve?

    I created universe based on query on bw and then created query in QaaWs.
    I trying to query summary of sale amount for the periods that selected on the prompts screen.
    I put sale amount in Result Ojbects pane and put periods in Filter Objects pane.
    And set periods option to prompts in between. When I entry periods 008.2009 - 009.2009
    The result of sale amount is not correct. It's seem only show the value of one period.
    Does anybody know about this issue and maybe how to resolve?
    Thanks.

    Hello David,
    I use an OLE DB connection to a MS SQL Server 2005.
    Connection Details say:
    Version 2.0.0.29
    Build 12.1.0.882
    Network Layer OLE DB
    DBMS Engine MS SQL Server 2205
    Database used is MS AdventureWorksDW sample database (data warehouse sample)
    I noticed that only with this database, ranking is selectable (not with the AdventureWorks non-DW sample database).
    Ranking itself seems to work, if I activated ranking (e.g. Top 10 customers) everything is ok.
    (Also if I  send a direct SQL command with ranking to the DBMS, it seems ok.)
    Issue arise if I add year filter. Combination of rank and year filter does not seem to work properly.
    Any idea why? Or do you wanted to say that this issue might also be related to DBMS support? I would hope / expect to get a straight "ranking not supoorted" and not incorrect data back ...
    Thanks for your answer anyway!
    Regards,
    Stefan

  • File content conversion Document offset not working?

    hi All,
    I have a flat file which i need to convert into an xml using content conversion.
    The document consists of 18 lines as shown below:-
    #HEADER_ARCDLX3098   OMD.I.170 0000000000000002#HEADERFECHADOC A 8
    HEADER A 25
    CLAMOVIM A 3
    MOTIVMOV N 4
    CENTRO A 4
    DEPOSITO A 4
    PROVEED A 10
    DEPRECEP A 4
    MATERIAL A 18
    CANTIDAD N 13
    UNMEDIDA A 3
    FLAGDEIMPRESION A 1
    TRANSPORTISTA A 12
    CHOFERPATENTE A 50
    CENTRORECEPTOR A 4
    MATERIALRECIBIDO A 18
    NUMERWMS A 16
    #DATA10521000          12345678            12210521000          12345678            12210521000          12345678            122#EOF
    the first 17 lines are to be ignored. And only the 18th line to  be taken.
    The 18th line however, contains multiple records based on fixed field length.
    For example the above example contains 3 records - "10521000          12345678            122" , "10521000          12345678            122" and "10521000          12345678            122".
    I tried to do a content conversion with document offset. However, it doesnt seem to work. There is no error and the xml is created without ignoring the first 17 lines.
    xml.documentOffset
    17
    this is what is given in the content conversion.
    Please help.
    thnx,
    Ninu

    Hi,
    Under Document Offset parameter, specify the number of lines(in ur case its 17) that are to be ignored at the beginning of the document.
    This enables you to skip comment lines or column names during processing.
    This should work. check the below link:
    http://help.sap.com/saphelp_nwpi711/helpdata/en/44/6713ec3f914ddee10000000a1553f7/frameset.htm

  • Insert at BWF Time Offset - Not working!

    I have some broadcast wave files generated with Cubase 5, and they definitely have BWF time offset. I can see it in File Info. When I select the option to Use BWF Time Reference Offset, and then attempt to insert the file, it just inserts at the cursor. How do I make it insert at the time offset?

    Seems this is a good thing in CS4.
    In CS3, you can split tracks that you didn't want split if you are not careful, so this seems like a very good new thing they added.
    Dave.

  • Frame Offset not working

    Hi all
    I'm running FCP 5.1.4 on a dual 2.3 G5, OS X 10.4.9, QT 7.1.5, with a BlackMagic DeckLink HD Pro card (driver v6.1) component out to a broadcast LCD. I'm using an M-Audio MobilePre USB for audio with its latest driver (1.6.5) and "Medium Latency" out to powered monitor speakers.
    I'm unable to get playback sync of sound and picture, and the Frame Offset (System Settings>Playback Control>Frame Offset makes no difference. Even at extreme settings the sync error remains the same (approx 2-3 frames).
    I know I should be monitoring through the BlackMagic's SPDIF out, but I don't currently have any way to amplify that signal. I also know USB audio is probably asking for trouble, but this should work with the right offset, no?
    Anyone shed any light?

    You should be using audio that follows the video, else you'll get latency. Frame Offset is for those times when deck control might be off... certain HD signals and old rs422 caused this.
    Your best bet is to figure out how to amplify the signal out of the decklink card.
    CaptM

  • LifeDrive revived - Outlook 2003 not working and needs periodic battery re-insertion

    My Palm LifeDrive has been revived with all of its attendant data. I had a prior problem with a dead battery, and ordered one on-line. I received a cheap Oriental no-name battery (with screwdriver), and replaced the dead Sony battery that was in there. After charging, it seems to work.
    I now have a couple of problems that are minor in comparison. First, when the display times out and the unit turns itself off, I have to reboot it to switch it back on. The slider switch on top doesn't work in that case.  If I switch it off myself, it turns back on easily and does not require a reboot.
    The other thing is a good news/bad news problem. The good news is that the ACCESS Palm desktop works if I log in into Windows 7 as a normal (non-Admin) user for the first time ever. Also, for the first time, the Bluetooth Sync feature works without error for the first time as a non-Admin user. Logging into W7 is also flawless, with no error dialogs popping up from the HotSync drivers as they are loading. Bad news is that I can't see any information at all under Outlook 2003 for the first time. Is this necessarily an either/or proposition? I want to merge Project 2003 with the Outlook scheduler, but now I will have two separate schedules on separate software. Why can't I see my schedules and contacts under Outlook? Any ideas?
    [later added 4/29/2012] There is another problem now. The LifeDrive has switched itself off unaccountably so that neither the ON switch nor soft/hard resetting will turn it back on. Only another disassembly/reassembly of the LifeDrive (battery removal and re-insertion) would revivie it again. Any ideas as to what might be wrong or how to troubleshoot it?
    Paul King
    Post relates to: LifeDrive

    It seems that deploying a PRF file is best based on the research as well as some of the links which Amy shared. Users are using Outlook 2010 using the /importprf switch however with outlook 2010 the " Encrypt data between Microsoft Outlook and Microsoft
    Exchange" is enabled by default this causes some of the users to be continuously prompted for authentication, I was able to manually fix the issue by disabling  "Encrypt data between Microsoft Outlook and Microsoft Exchange"
    Sorry cannot post images or link yet as my account is not verified...
    We can't do this manually but want to modify the PRF file to disable this. So far the only documentation referring to this is for Outlook 2003 to
    enable this,  it was disabled by default with this version of outlook.
    It is found at
    support.microsoft.com/kb/2006508
    Add "http://" to the link
    From this document I now know the setting is labelled - RPCEncryptData
    Which needs to be changed under the
    [ServiceEGS]
    and
     [Exchange Global Section]
    But I have no clue what values will disable it, anyone knows what values will disable it ? help would be appreciated.
    Thanks in advance.

  • I have recently noticed that my MacBook Pro Retina keeps freezing.  I first noticed that the track pad would not work for short periods of time.  Is anyone else having a problem?

    My MacBook Pro Retina keeps freezing up.  It seems that it is happening more often as time goes on. 
    I first noticed that the track pad would freeze then whole computer would completly freeze.
    Most annoying.
    Is anyone else having a similar problem?

    Hey B-bram,
    For issues with video resolution not being consistent, I would start with resetting the NVRAM on your MacBook Pro. That will reset the resolution to its default as well as resetting other default settings like sound volume and start up volume. Take a look at the article below for more information about that and how to perform the NVRAM reset. 
    How to Reset NVRAM on your Mac
    http://support.apple.com/en-us/HT204063
    Take care,
    -Norm G. 

  • Offset for variable not working !

    Experts,
    I have to show sales for last 5 months ( in 5 diff. Columns )
    So, i have written CMOD code, where i am converting System date in to Fiscal Year / Period using FM DATE_TO_PERIOD_CONVERT.
    every thing works good, i do get result. but the problem is the Offset for Variable function doesnt support that.
    I was hoping that, Now i can do Offset -1, -2 , -3...till -5 and i will have all 5 Periods.
    But looks like its not working out.
    What other logic i can use.
    !!!!!!!!!!My Variable is Not ready for Input !!!!!!!!!!! So the only way i found is to convert system date to current Period and then off setting it till last 5 months. And i do need to so last 5 months starting current Period -1, -2, -3, -4 and -5
    is there any other way to get current Period ( i guess only from system date ).
    I think in my logic, when i do offset, its not offsetting the Period, but its off setting system date.
    Please help

    Hi Honar,
    I am pretty sure offset should work, in your customer exit, calculate the current period as using the system date, once you get that, create a variable with the same name as you defined in the customer exit and use that variable in five different restricted key figures with each with (Variable, Variable -1, Variable -2, Variable - 3 and Variable - 4). If you have done so and not working, what are you getting in each of the variables, there might be some notes which could address that issue.
    thanks.
    Wond

Maybe you are looking for