Ofgtel65.pll , CGDV$REF_CODES.SOFT_VAL problem after migrating to 10g

Hi,
We have migrated from Oracle 9i to 10g and
In 'OAS904' , i have used CGDV$REF_CODES.SOFT_VAL to populate a field with a meaning via a dynamic list in one of the FORM and if I query the form by giving a value and press F12,all fields are populating , its working fine but the same thing is not working after migrating the FORMS application to 'OAS10.1.2'. If I query the form by giving a value and press F12,its showing error like "FRM:40201 Field must be entered" for that particular field because that field is not populated and also a required field in the form.
Actually , this form is generated by designer.If i open the form using forms builder, i can see the auto generated code like 'POST-QUERY', in that CGDV$REF_CODES.SOFT_VAL is used to retrieve the meaning.
Note : ofgtel65.pll points to QMS_REF_CODES instead of CG_REF_CODES.
Am using headstart6.5.4.0 .
The generated form having post_query with the following code
CGDV$REF_CODES.SOFT_VAL(P_VALUE=>curr_value, P_MEANING=>l_meaning, P_DOMAIN=>l_domain, P_VAL_CODE=>TRUE);
But in the ofgtel65.pll ,
the soft_val method will have a query that refers to QMS_REF_CODES .But my meanings are present in CG_REF_CODES.
Any help would be of great help. Thanks in advance.
Regards,
Tharini.
Edited by: tharini on Aug 4, 2010 10:30 PM

Is this a Designer generated Form ? You may want to ask the question on that Forum too.

Similar Messages

After Migrating from 10g to 11g Geeting problems with Guided navigations.

After Migrating from 10g to 11g Geeting problems with Guided navigations and section navigations not working.
And we are getting the following error <<odbc driver returned an error (SQLExecDirectW)>> where we have used navigations.
In 10G we have Guided navigation Reports to display the Reports links and intermediate reports for conditionally displaying the Dashboard section(Reports) but after migrating to 11g Guided navigation reports and conditional reports are not working..
We know that in 11g section navigation replaced with conditions and Guided navigation replaced with action link.. but
do we need to recreate those reports in actions and condition or is there any work around avoid reworking.

Hi Both,
Thanks for the reply ...
For Guided navigation we are getting like below error:
Odbc driver returned an error (SQLExecDirectW).
For Conditional dashboard section we are getting like below error:
"saw.aViewsToRefresh = [];saw.aViewsToRefresh['d:dashboard~p:1egt6il5utl0uu8n~s:3jsmgfs3c1r4tn7c~n:condition'] = true;saw.aViewsToRefresh['d:dashboard~p:1egt6il5utl0uu8n~s:nos5q43jvjmi643b~n:condition'] = true;"

NQS ERROR:14025 NO FACT TABLE EXISTS -after migrating from 10g to 11g

NQS ERROR:14025 NO FACT TABLE EXISTS AT THE REQUESTED LEVEL OF DETAIL in all the reports after migrating from 10g to 11g ...
then we applied the patch (One-off Patch for Bug: 11850704) for the error <<NQS ERROR:14025 NO FACT TABLE EXISTS AT THE REQUESTED LEVEL OF DETAIL>>
But after applying the above the above patch we are still getting the same error.
but in the above patch instructions file - Post deployment instructions to create the Variable
Post Install Instructions:
- To revert to the 10g navigator behavior for handling conforming dimensions,
you must set the following session variable via an init block in the RPD:
NO_FORCE_TO_DETAIL_BIN=1
The default value for the above variable is 0.
- Restart all servers (Admin Server and all Managed Server(s))
but we didn’t find the process to create the specified variable and Initialization block in the RPD
Can you please suggest us how to go further.
Our questions are:

Hi
Refer the below thread.
obiee 11g non-conforming dimensions and nQSError 14025
Might be help you/
Thanks,
satya

Serious problem after migration assistant - any ideas?

Hi folks-
I bought an iMac this weekend and for various reasons did not configure with data from my MacBook Pro when I first turned it on, but waited until two nights ago to use Migration Assistant to transfer all but users.
I updates both machines fully with Software Update first. MigAsst went fine until I hit the begin option and after a few minutes the iMac told me there was a problem with my MacBook Pro (MBP). I quit MigAsst on the iMac but even after an hour I couldn't escape it or quit the MBP, so shut down using the power button.
When I restarted, I had a black screen with lighted keyboard and startup chime. I hard-restarted, same thing happened. Third time, I got the grey apple window with no apple for about ten minutes, then a light blue screen with the spinning spokes (not the rainbow) and a slightly darker window with no spokes. The two blue windows alternated back and forth for maybe 8-10 seconds each endlessly until I restarted.
Since I live about 4 hours from the nearest Apple store and tech support was already closed for the evening, I restarted from the Snow Leopard disk and repaired permissions (there were many repairs) and repaired the disk (was told it was fine). I restarted and got the grey-blue-blue cycle again.
I reinstalled the OS from the Snow Leopard disk and everything worked fine - I ran as many tests as I know how to, even perturbed the casing slightly wondering if it was a loose video card wire or something. Nothing. It all worked fine for several hours until after the second Software Update (which as I recall was only Java and iTunes), and now all I get is the black screen again. Also, now the green light on the power cable is not glowing even though the battery reads as fully charged and the keyboard and startup chime are all hunky dory.
I'd think it was a video card issue, but there are too many incongruous symptoms. If I could at least start up from the OS disk again I could get my data off... Any ideas, diagnoses or suggestions would be much appreciated.
With gratitude and blessings.

The problem is described in a different post as well, and it is considered to be answered. However, the answers are not very satisfactory because they are complicated.
The underlying problem is that MacOS is looking for a FileVault user, while after migration the user files are actually not within a FileVault bundle.
I believe that there must be a setting to change the login properties for the user to not look for a FileVault user, but for a plain, non-encrypted user. So please, somebody from Apple answer this questions!
Command line very welcome, because I only have a command line user right now. And oh, my MBA didn't ship with a boot DVD so I don't even have the chance to reinstall my system easily. Also, getting my data out of the FileVault on my current machine, transfering everything again (almost 250 GB) and then putting them back into FileVault seems a bit too much effort for what appears to be a simple bit set somewhere…

Problem with national fonts after migration 9i- 10g

I'm after migration from Developer Suite 9i to 10g. I see that all Polish characters are replaced with '?'. This problem is only in 10g Designer (before migration all were OK).
I've tried setting NATLNG to POLISH_POLAND.EE8MSWIN1250 in Forms Generator. In Windows registry is POLISH_POLAND.EE8MSWIN1250 (setting by DS10g setup).
I've tried fonts via Options->Color/Font/Style - I see change on Display view but '?' are still after saving changes and generating form.

Thanks knordstrand.
Problem's resolved yet. You're right - wrong charset on bd.
Close topic

Problems after migrating application from 10.1.2 to 10.1.3

Hi,
I am encountering the following error while executing the application after migrating it from Jdeveloper10.1.2 to JDeveloper10.1.3. Could you please help me in this regard..
NOTIFICATION J2EE JSP0008 Unable to dispatch JSP Page : java.lang.NullPointerException
     at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:60)
     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:416)
     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:478)
     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:401)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
     at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:332)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:629)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:376)
     at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:870)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:451)
     at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:218)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:119)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:112)
     at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
     at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:230)
     at oracle.oc4j.network.ServerSocketAcceptHandler.access$800(ServerSocketAcceptHandler.java:33)
     at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:831)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:298)
     at java.lang.Thread.run(Thread.java:595)
Message was edited by:
user491067

Do you have the problem with all JSP pages, or only a few of them ?
Does it happen in the Embedded OC4J only ?
Could you try to deploy your application in the Standalone OC4J and test it from there ?
I had a similar issue where the Embedded OC4J was unnable to run big JSP pages.
There was no problem with the Standalone OC4J.
Hope this helps,
Didier.

BC4J problems after migrating JDeveloper 9.0.3 - 9.0.4

Hi!
We have application based on BC4J+struts framework. After migrating JDeveloper from 9.0.3 to 9.0.4 we are getting following errors:
JBO-27021: AttributeLoadException
JBO-27022: AttributeLoadException - it seems to be a problem between datatype mapping but on 9.0.3 application worked fine
next we get folowing error when we are inserting a row into the ViewObject. This error does not appear by first inserting but by some of the subsequent calls of insertRow.
java.lang.ArrayIndexOutOfBoundsException
     at oracle.jbo.server.QueryCollection.add(QueryCollection.java:1051)
     at oracle.jbo.server.ViewRowSetImpl.insertRowAtInternal(ViewRowSetImpl.java:1288)
     at oracle.jbo.server.ViewRowSetImpl.insertViewRowAt(ViewRowSetImpl.java:1255)
     at oracle.jbo.server.ViewRowSetIteratorImpl.insertRow(ViewRowSetIteratorImpl.java:1963)
     at oracle.jbo.server.ViewRowSetImpl.insertRow(ViewRowSetImpl.java:1933)
     at oracle.jbo.server.ViewObjectImpl.insertRow(ViewObjectImpl.java:5425)
     at cz.cca.akademie.action.ra9500.AssignActionPriradRole.execute(AssignActionPriradRole.java:23)
     at cz.cca.akademie.action.AssignAction.execute(AssignAction.java:55)
     at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
     at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
     at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
     at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:525)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:778)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:317)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:790)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:270)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:112)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
     at java.lang.Thread.run(Thread.java:536)
Unfortunately I'm not able to say when exactly these errors happen, they appear accidentally. It seems to be a problem with inner state of the ViewObject.
We would be glad for any suggestion
Thanks

CONTINUES...
What is the problem? Something with the ClassLoader of Tomcat 4.1?
I will try with Tomcat 4.0 and post this thread to tomcat-users mailing list!
bye,
Marco.

Major permissions problems after migrating to new iMac

Hi, I am very new to this and need some help. Have been using a MacBook pro for the past year to synch iPods/iPads that are used within our school. Purchased an iMac and proceeded to migrate users/files etc. After migrating I have had major problems with iTunes. My iTunes library is visible but I cannot synch any devices, have tried verifying permissions and fix permissions but to no avail. Any help would be very much appreciated.

Did you instal the program again, or try to migrate it from the old system (not a good idea)? I would run the installer again and it should correct the problem -- the Proximity dictionary for English (and probably others) is apparently not installed correctly.

Problems after migration from CS5 to 5.5 with Blackmagic Card

Hello forum,
we have an problem after an optimal migration from cs 5 to 5.5 projects.
different: there is an bm hd extreme 3d card in the system.
We are aware of the issue that there has to switch to BM player an the Timleinl settings to BM
But there is still a problem: we are not able to view the ingested material in the source viewer,
because there is another overlay - form the background or sometheing else - see attached photo.
We add new drivers for graphics/BM and patches for CS 5.5
None of these problems by creating new projects.
Also the applications also hangs after we try to close,
many thanks for your answers - Sven.

No reason to ask the same question twice. Just be aware that there are German forums as well.
Your problem is probably in the BM drivers.

2 Problems after migration Project Server 2007 to 2010

Hi Everyone!!
I have 2 issues after migrate MS Project Server 2007 to Project Server 2010, in fact i had a lot issues, but i can solve almost all, so after solve all issues, just is pendings 2 issues very rare:
Backgrounds:
Migrated from: Windows Server 2008R2 - SQL Server 2008 R2 - Proejct Server 2007 with WSS 3.0 - All updates are up to date (CU is up to date) and all platform is ok
To: Windows Server 2008R2 - SQL Server 2008 R2 - Project Server 2010 SP2 - SharePoint Server 2010 SP2 - All updates are up to date (CU is up to date) and all platform is ok
3 Servers in the Farm, ----> 1WFE-1WAPP-1DB
Issues:
In the Project Center, some migrate Project don't show the icon with image about project documents, risk and issues although that project effectively have documents , risk and issues
In "Server Settings" , in section "Operational Policies" in "Project Sites" almost all projects don't show the URL with Project Site
For the issues 1 and 2, i tried some things:
Re publish all projects (approx 700 projects) with a script via PowerShell available in technet
Run the Wizard Again
Rebuild Solution
Restart the all Servers in the Farm
Restart Services ----> IIS - Project EventService - ProjectQueue - SharePoint Timer
and i can't solve it yet!!!
Please Any Ideas?
Erick Gutiérrez PMI Membership #ID 2089740 MTCS - Microsoft Project Server Managing Projects

Have you restored content DB successfully?
for point 2 have you performed:
have you synchronized project site under server setting --> operational policies --> Bulk Update Project
Sites
http://pwmather.wordpress.com/2012/10/08/projectserver-2010-bulk-update-project-site-issue-ps2010-msproject-sp2010-sharepoint/
after doing this publish all the project which are having issue it may solve your 1st issue.
You can check if below condition is applies to you (PWA 2007)
You may need to use the WSS site re-linker tool –
now built in to Server Settings in PWA as “Bulk Update Project Sites”. If you have changed URL die to a different port then re-linking should get your sites in order. In upgrade scenarios the “Previous Site Path” Web application might show as a GUID
in the drop down – however it still works and will re-link the sites.
http://technet.microsoft.com/en-us/library/cc197498(v=office.12).aspx
kirtesh

Strange Calendar sync problem after migrating to iOS5

Hello all,
I posted my problem as an "me too" reply to somebody else's thread but think it got a bit lost there.
Since I can't solve this problem I decided to make a new thread.
The problem:
After upgrading my iPhone4 to iOS5 I have a strange calendar syncing issue such that existing entries from one calendar (I've got two, see below) are duplicated on the other .... but only on the iPhone, not on the calendar server (Lotus Notes) itself!
As I couldn't find a normal solution to this problem (already removed the complete Lotus Notes traveler account from my iPhone and reinstalled it again, to no use: the duplicates pop up again) I finally decided to start removing the duplicate entries on my phone. To my surprise however they popup again!!!!!
I added a new entry to the original calender to see whether that one would popup in the other as well but this didn't happen.
It looks to me it must be something wrong on my iPhone as the "duplicates" do not show up in the calender database on the server (using Lotus Notes PC client) nor its replicas.
The configuration:
I sync with two calendars on my iPhone:
- gmail calendar for my private
- lotus notes server (traveler exchange) for my work.
The gmail calender also syncs with my desktop client (outlook 2010) via a small application "gSyncit".
This all worked like a charm on iOS4.
No matter where I modified, deleted or added entries (not only calendar, also contacts and mail) it all stayed perfectly in sync!
Does anybody out here noticed the same and/or has a solution to this?
BTW: I haven't activated iCloud for the calendar/mail/contacts (yet) ...

OK,
I found out what was wrong myself.
In the end it turned out that it had nothing to do with the iOS5 upgrade itself.
In case somebody else stumbles accross this very same problem, here's what was going on:
- Within the latest lotus notes client (on PC) the user has the possibility to display (read-only) external calendar contents (e.g. google's calendar).
- When setting this up you need to supply your external calendar's login/password information and next to that
- also have the possibility to select "View this calendar when offline or on a mobile device"
It was this setting (which I probably accidentally enabled) causing the "issue". Deselecting this option made my duplicate entries disappear on my phone.

Problem after migrate 6506 to N7K

we just replace 6500 with N7K, after migration there're some device (server,pc,printer) change its ip address configuration (subnet and gateway) by it self. can N7K did it?
Posted by WebUser Hafif Hery Husen from Cisco Support Community App

hi Darren im the "Web User" above
yes i believed the L3 config on N7K was correct but i need to make sure it .. that's why i posted this question
version 6.0(1)
interface Vlan83
description ** Link to Server Room 3 **
no shutdown
ip flow monitor Netflow-Monitor-AABHO-CS input
ip flow monitor Netflow-Monitor-AABHO-CS output
no ip redirects
ip address 172.16.83.248/24
ip router eigrp 8888
ip arp 172.16.83.25 03BF.AC10.5319
version 6.0(1)
interface Vlan88
ip flow monitor Netflow-Monitor-AABHO-CS input
ip flow monitor Netflow-Monitor-AABHO-CS output
ip address 172.16.88.201/24
ip router eigrp 8888
ip dhcp relay address 172.16.83.30
description ** Link to 8fl **
no shutdown
version 6.0(1)
interface Vlan81
ip flow monitor Netflow-Monitor-AABHO-CS input
ip flow monitor Netflow-Monitor-AABHO-CS output
ip address 172.16.81.201/24
ip router eigrp 8888
ip dhcp relay address 172.16.83.30
description ** Link to 1fl **
no shutdown
any other config that i should post ?

Getting "ORA-01002: fetch out of sequence" after migrating into 10g

Hi All,
We are getting the mentioned error after migrating from "Oracle9i Enterprise Edition Release 9.2.0.8.0 - 64bit Production" to "Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit", when running a procedure.
Have anyone faced this problem before? I have searched a lot but the solution provided is to not to use commit inside loop. We are not using FOR UPDATE with cursors.
Any idea why the procedure running succesfuly in 9i is giving error in 10g.
PROCEDURE is very complicated and calling a lot of other procedures and functions.
Thanks in advance,
Jeneesh

Hi Boneist ,
Actually the code structure is like this. Loping through 140,000 records.
   declare
      cursor c1 .....;
begin
      massaging data;
      for rec in c1 loop
         do_processing .........
         if count is multiple of 5000 commit;
      end loop;
      other processses;
end;
Error is coming after the commit. But the same code is working fine in 9i.
Regards,
Jeneesh

[SOLVED] incorrect navigation after migration 6i - 10g

Hi,
we have a big problem after forms migration from 6i to 10g. :-(
Our forms appliction contains a lot of forms with master detail data blocks in tabular layout. In most cases we have text fields inside the data blocks.
After migration we are not able to set the focus on any record by mouse. We are also unable to change the focus from one data block to another. The only way to set the focus is clicking on a check box (if there is one).
In 6i everything works: you can select records by mouse and you can focus another data block. (we tried migration by forms migration assistant and migration by forms builder with same results)
Any hints?
Thanks in advance, florian.
Message was edited by:
fschulze

problem solved!
applying patchset 3 (5983622) solved all navigation probs without programmig. just recompiled with 10.1.2.3 and everthing works as expected ;-))

Unable to parse WSDL of partnerlink after migrating from 10g to 11g

Hi,
My service is an Sync BPEL process calling a customised WSDL with the partnerlink. I migrated the working code of 10g to 11g. But compiling below is the error i am getting while trying to parse the WSDL of the partnerlink after migration.
==========================================
java.lang.RuntimeException: oracle.tip.tools.ide.pm.modules.sca.util.SCAException: SCA_COMPONENT_NAME_NOT_DEFINEDProcessInteraction_v1
     at oracle.tip.tools.ide.pm.modules.sca.ide.JDevScaProcessListener.modelChanged(JDevScaProcessListener.java:78)
     at oracle.tip.tools.ide.common.bpelparser.implementations.xmlef.ProcessImpl.fireModelChanged(ProcessImpl.java:130)
     at oracle.tip.tools.ide.pm.bpelgraph.editors.partnerlink.PartnerLinkEditPage.firePartnerLinkCreated(PartnerLinkEditPage.java:1426)
     at oracle.tip.tools.ide.pm.bpelgraph.editors.partnerlink.PartnerLinkEditPage.saveToModel(PartnerLinkEditPage.java:360)
     at oracle.tip.tools.ide.pm.bpelgraph.editors.partnerlink.PartnerLinkEditPage.saveChanges(PartnerLinkEditPage.java:224)
     at oracle.tip.tools.ide.pm.bpelgraph.views.nodeeditors.AbstractActivityNodeEditor$PanelManager.saveChanges(AbstractActivityNodeEditor.java:224)
     at oracle.tip.tools.ide.pm.bpelgraph.views.nodeeditors.ApplyCancelPanel.handleOK(ApplyCancelPanel.java:268)
     at oracle.tip.tools.ide.pm.bpelgraph.views.nodeeditors.ApplyCancelPanel.actionPerformed(ApplyCancelPanel.java:339)
     at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1995)
     at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2318)
     at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)
     at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:242)
     at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:236)
     at java.awt.Component.processMouseEvent(Component.java:6263)
     at javax.swing.JComponent.processMouseEvent(JComponent.java:3267)
     at java.awt.Component.processEvent(Component.java:6028)
     at java.awt.Container.processEvent(Container.java:2041)
     at java.awt.Component.dispatchEventImpl(Component.java:4630)
     at java.awt.Container.dispatchEventImpl(Container.java:2099)
     at java.awt.Component.dispatchEvent(Component.java:4460)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4574)
     at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4238)
     at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4168)
     at java.awt.Container.dispatchEventImpl(Container.java:2085)
     at java.awt.Window.dispatchEventImpl(Window.java:2475)
     at java.awt.Component.dispatchEvent(Component.java:4460)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:599)
     at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
     at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
     at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:178)
     at java.awt.Dialog$1.run(Dialog.java:1045)
     at java.awt.Dialog$3.run(Dialog.java:1097)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.awt.Dialog.show(Dialog.java:1095)
     at java.awt.Component.show(Component.java:1563)
     at java.awt.Component.setVisible(Component.java:1515)
     at java.awt.Window.setVisible(Window.java:841)
     at java.awt.Dialog.setVisible(Dialog.java:985)
     at oracle.tip.tools.ide.common.graph.view.GraphPane.startEditing(GraphPane.java:1899)
     at oracle.tip.tools.ide.common.graph.view.GraphPane.startEditing(GraphPane.java:1830)
     at oracle.tip.tools.ide.common.graph.view.GraphPane.mousePressed(GraphPane.java:2186)
     at oracle.tip.tools.ide.pm.bpelgraph.views.BPELGraphPane.mousePressed(BPELGraphPane.java:2010)
     at java.awt.AWTEventMulticaster.mousePressed(AWTEventMulticaster.java:262)
     at java.awt.AWTEventMulticaster.mousePressed(AWTEventMulticaster.java:262)
     at java.awt.AWTEventMulticaster.mousePressed(AWTEventMulticaster.java:262)
     at java.awt.Component.processMouseEvent(Component.java:6260)
     at javax.swing.JComponent.processMouseEvent(JComponent.java:3267)
     at java.awt.Component.processEvent(Component.java:6028)
     at java.awt.Container.processEvent(Container.java:2041)
     at java.awt.Component.dispatchEventImpl(Component.java:4630)
     at java.awt.Container.dispatchEventImpl(Container.java:2099)
     at java.awt.Component.dispatchEvent(Component.java:4460)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4574)
     at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4235)
     at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4168)
     at java.awt.Container.dispatchEventImpl(Container.java:2085)
     at java.awt.Window.dispatchEventImpl(Window.java:2475)
     at java.awt.Component.dispatchEvent(Component.java:4460)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:599)
     at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
     at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)
Caused by: oracle.tip.tools.ide.pm.modules.sca.util.SCAException: SCA_COMPONENT_NAME_NOT_DEFINEDProcessInteraction_v1
     at oracle.tip.tools.ide.pm.modules.sca.util.JDevSCAIntegrationUtil.validateNameDefined(JDevSCAIntegrationUtil.java:687)
     at oracle.tip.tools.ide.pm.modules.sca.util.JDevSCAIntegrationUtil.outboundParnerLinkCreated(JDevSCAIntegrationUtil.java:233)
     at oracle.tip.tools.ide.pm.modules.sca.ide.JDevScaProcessListener.createOutboundPartnerLink(JDevScaProcessListener.java:170)
     at oracle.tip.tools.ide.pm.modules.sca.ide.JDevScaProcessListener.modelChanged(JDevScaProcessListener.java:65)
     ... 64 more
======================================
Can someone help me out!
Thanks in advance:)

Were you able to resolve this Issue, can you please post the solution
글 수정: soauser

Ofgtel65.pll , CGDV$REF_CODES.SOFT_VAL problem after migrating to 10g

Similar Messages

Maybe you are looking for