OFM 11 Configuration Err: Creating Reports Tools + Server Components Failed

I was encountered with this error during Configuring the OFM 11.1.1.3.0 Linux 64
Creating Reports Tools Components Failed
Creating Reports Server Components Failed
Executing: opmnctl startproc ias-Components
I restart the wls and the admin server and all managed servers in the ClassicDomian too many times and problem still persists
I search this forum and other sites before posting this thread
my machine specification is over VMware 7 on Windows 7 x64 as following:-
1- Oracle Enterprise Linux 5.5 x64
2- Database 11g 11.2.0.1.0 x64
3- wls1033_generic x64
4- OFM 11.1.1.3.0 x64
I didn't install Portal neither OID
Can I Configure these Components Manually after fininshing the Installation ?

Hello Hans. Did you ever find a resolution to this problem? I'm encountering the same issue and cannot find much information online pertaining to this problem. Can you tell me if you found a solution or any useful posts pertaining to this problem?
Thanks,
Pablo

Similar Messages

Report generation: server execution failed

the app has been running for months. IS dept just upgraded machines and software. NT4.0 is now Win2000 and Office 97 is now Office2000. Report generation tool kit is not happy. Even running NI examples I get error -2146959355 server execution failed in Font Style.vi
Lawrence M. David Jr.
Certified LabVIEW Architect
cell: 516.819.9711
http://www.aleconsultants.com
[email protected]

Searching the Microsoft's web site, I found some info on this error:
If you have never had Norton AntiVirus installed on your computer, follow the following instructions:
1. Open up the specific VI causing Error �2146959355
2. Recompile this VI by pressing the Run arrow while holding down the CTRL and SHIFT keys
3. Go to File � Save All
4. Run the VI
If you are using Norton AntiVirus 2000 with Microsoft Word 2000, follow these instructions:
Note: This information was provided by http://support.microsoft.com. Please use these instructions at your own risk.
1. Select Start � Run
2. If Norton AntiVirus is installed as a stand alone application, type:
regsvr32 -u "c:\program files\norton antivirus\officeav.dll"
If this is successful, you will receive:
DllUnregisterServer in C:\Program Files\Norton AntiVirus\OfficeAV.dll succeeded.
If Norton AntiVirus is installed as a component of SystemWorks, type:
regsvr32 -u "c:\program files\norton systemworks\norton antivirus\officeav.dll"
If this is successful, you will receive:
DllUnregisterServer in C:\Program Files\Norton Systemworks\Norton AntiVirus\OfficeAV.dll succeeded.
3. Click OK
Microsoft notes that in some cases you must rename the oleaut32.dll and reinstall Office 2000. Renaming oleaut32.dll usually requires that you boot your computer in MS-DOS mode.
- Navigate to the directory where oleutt32.dll is located (usually C:\windows\system32) using the cd DOS command.
- Type: rename oleaut32.dll renamed_oleaut32.dll and press Enter
- Reinstall Microsoft Office
Note: This problem seems to still exist with Office 2002.
1. Unfortunately, this is how the activeX works. If Microsoft changes the activeX objects from one Office version to another, the executable built with Office97 will not work with Office2000. You will have to recompile your VI into the executable on a machine with Office2000 and toolkit configured for this version.
2. For the error "server execution failed" with Text Report Example, select File � VI Properties. Select "Execution" from the category box and set the "Preferred Execution" to user interface. This should solve the problem.
Zvezdana S."

Error while install oracle 11G forms and reports -creating Reports Server components error

Hello,
while install oracle 11G forms and report i face below issue on below step ( configuration step)
>> creating Reports Server components error
[2014-10-15T09:26:26.328+03:00] [as] [TRACE:16] [] [oracle.as.config] [tid: 45] [ecid: 0000K^EnlatDg^WFLzfP8A1KFHkM00000^,0] [SRC_CLASS: oracle.as.config.utl.FileUtil] [SRC_METHOD: isWebsphereEnabled] Java property is not defined. isWebsphereEnabled=false
[2014-10-15T09:26:26.328+03:00] [as] [TRACE:16] [] [oracle.as.config] [tid: 45] [ecid: 0000K^EnlatDg^WFLzfP8A1KFHkM00000^,0] [SRC_CLASS: oracle.as.config.utl.FileUtil] [SRC_METHOD: isWebsphereEnabled] Java property is not defined. isWebsphereEnabled=false
[2014-10-15T09:26:26.449+03:00] [as] [TRACE:16] [] [oracle.as.config] [tid: 45] [ecid: 0000K^EnlatDg^WFLzfP8A1KFHkM00000^,0] [SRC_CLASS: oracle.as.config.utl.FileUtil] [SRC_METHOD: isWebsphereEnabled] Java property is not defined. isWebsphereEnabled=false
[2014-10-15T09:26:26.458+03:00] [as] [TRACE:16] [] [oracle.as.config] [tid: 45] [ecid: 0000K^EnlatDg^WFLzfP8A1KFHkM00000^,0] [SRC_CLASS: oracle.as.config.impl.OracleASInstanceProvisioner] [SRC_METHOD: directoryIsPopulated] directoryIsPopulated found unexcluded file/dir: /u01/app/oracle/product/fmw11g/asinst_1/tmp
[2014-10-15T09:26:26.459+03:00] [as] [TRACE:32] [] [oracle.as.config] [tid: 45] [ecid: 0000K^EnlatDg^WFLzfP8A1KFHkM00000^,0] [SRC_CLASS: oracle.as.config.impl.OracleASInstanceProvisioner] [SRC_METHOD: calcDirectoryStatus] Oracle Instance directory status: INSTANCE

Ram,
You didn't read the response in your other thread.
WLS 10.3.5 isn't the right version of WLS to use with Forms 11.1.1.3
John

Error Creating Reports Server Components when installing 11.1.1.2

Hi There
I'm trying to install a A WLS(11.3.2) and Forms/Report 11g (11.1.1.2 bundle) on a Linux RedHat 5.5.
But when the configuration tools of Forms/Reports is trying to create the reports server I got the following error:
Executing Task: Creating Reports Server Components
ALERT: Invalid component name: ReportsServer_fd-red03.in.fd.dk_asinst_1 (Component name must begin with an alphabetic character; may only contain alphanumeric characters, or the underscore (_) or hyphen ( -) characters; and must be 4 to 30 characters long.) Continuing anyway.
progress in calculate progress4
Executing Task: Executing: opmnctl startproc ias-component=ReportsServer_fd-red03.in.fd.dk_asinst_1
GJS: About to call startOpmn
GJS: Entered startOpmn
*************** Trying to Start OPMN **************
*************** Executing Command **************
/home/oastest/Oracle/Middleware/asinst_1/bin/opmnctl startproc ias-component=ReportsServer_fd-red03.in.fd.dk_asinst_1
As I read the error message is the component name illegale and I guees that whats cause the Report Server to faile.
But how does the install tool figure out the name: ReportsServer_fd-red03.in.fd.dk_asinst_1 ?
And how do I prvent it from happens again.
Note: "fd-red03.in.fd.dk" is the full hostname
Regards Hans S

Hello Hans. Did you ever find a resolution to this problem? I'm encountering the same issue and cannot find much information online pertaining to this problem. Can you tell me if you found a solution or any useful posts pertaining to this problem?
Thanks,
Pablo

Error in configuration of financial reporting in workspace web server

Hello,
I met an issue few days ago, and impossible for me to correct...
My installations are as following :
Server A :
Foundation Services
Workspace Services
EPMA + Calc Manager
EAS
Server B :
Planning
Worskpace Web
Financial Reporting
Server C :
Worskpace Web
Financial Reporting
I try to install a 4th Server exactly as the Server C.
Installation of Workspace Web : OK
Configuration of Workspace Web : OK
Installation of Financial Reporting : OK
Configuration of Financial Reporting : OK
Configuration of Foundation Workspace WebServer : KO
The configtool.err says :
(Apr 21, 2013, 02:08:23 AM), com.hyperion.avalanche.config.WebServerConfigurationTaskProcessor, ERROR, Error in web server configuring: java.lang.IndexOutOfBoundsException: Index: 0, Size: 0
java.lang.IndexOutOfBoundsException: Index: 0, Size: 0
at java.util.ArrayList.RangeCheck(Unknown Source)
at java.util.ArrayList.get(Unknown Source)
at com.hyperion.avalanche.HttpServerConfigurator.getWebComponentsList(HttpServerConfigurator.java:1247)
at com.hyperion.avalanche.HttpServerConfigurator.configureApache2(HttpServerConfigurator.java:246)
at com.hyperion.avalanche.HttpServerConfigurator.configure(HttpServerConfigurator.java:181)
at com.hyperion.avalanche.config.WebServerConfigurationTaskProcessor.execute(WebServerConfigurationTaskProcessor.java:70)
at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.executeCustomTask(RunAllTasksWizardAction.java:741)
at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.execute(RunAllTasksWizardAction.java:188)
at com.installshield.wizard.RunnableWizardBeanContext.run(Unknown Source)
After this configuration error, everything is ok in the worskpace except Financial Reporting elements.
After this configuration error, every configuration fails, I'm obliged to uninstall all the components of this server (Workspace Web and Financial Reporting).
This issue comes from the configuration of Financial Reporting in Workspace Web : Financial reporting is available from worskpaces of servers B and C.
Thanks for helping us.

hi,
maintain ports in xi system with naming convention <SAP(system id of R/3 )>EX: SAPSR3,and assign proper RFC destination to it...and in the same way do it in R/3 system
Check note 838560 for "RFC_ERROR_SYSTEM_FAILURE "
and Depending on what database you use check the database logs.
U can check with this RFC_ERROR_SYSTEM_FAILURE link,
http://help.sap.com/saphelp_erp2005/helpdata/en/ca/115e4088dc0272e10000000a155106/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/f6/daea401675752ae10000000a155106/frameset.htm
Note: reward points if solution found helpfull
Regards
Chandrakanth.k

RE: (forte-users) Reporting tools/components for ForteApplications?

Hi Robert,
A good place to start when it comes to reporting is Forte Consulting. They
have developed a tool called ReportKit, which is ActiveX integration with
Seagate Software's Crystal Reports tool. Crystal is not really a three-tier
tool (although, your Forte Consultant can probably set it up to mimic a
three-tier tool), but it is a quick, easy way to get quality reports from
your existing Forte applications. If you're interested, give your Forte
Sales Rep (or, better still, your Forte Regional Consulting Director) a
call. They can discuss pricing and scheduling. I've done several
integration projects with Crystal, and I highly recommend ReportKit for
small- to medium-sized reporting requirements. As for costs, I don't recall
how much CrystalReports runs, but I think there are developer licenses and
runtime licenses.
FYI, the actual integration of ReportKit is pretty quick. The more
time-consuming piece of any report tool integration is the design and
implementation of the reports to be used.
I hope this helps.
-Katie
Katie Tierney
Quality Management Analyst
Akili Systems Group
601 Jefferson, Suite 3975
Houston, Texas 77002
Office: (713) 655-1400
Cell: (409) 255-1643
"The bitterness of poor quality remains long after the sweetness of low
price is forgotten" --Larry Anderson
-----Original Message-----
From: Robert Brooke-N502365 [mailto:Robert.Brookeca.michelin.com]
Sent: Monday, February 14, 2000 8:17 AM
To: kamranaminyahoo.com
Subject: (forte-users) Reporting tools/components for Forte
Applications?
Hi all,
We are looking for what is currently in the marketplace to enhance the
reporting
capabilities of Forte. Ideally, we are looking for component libraries that
we
could import into our repository. Do these exist?
Currently, I have found six reporting tools that are out there. The
tools
are Actuate, Crystal Reports, Report Workshop from Indus Consultancy
Services, Brio Technologies (SQR) VisualBRIO, Visual CyberQuery from
Cyberscience Corp., and Beacon from Brahma Software Solutions FORTify
Components. Are there any others for Forte?
If anyone is currently using one of these Reporting Tools for Forte or
any
others, could you give me any indications as to the costs, training, type
of
application using the Reporting tool, would you recommend using the
product
again, does it use wrappering or API, or is it a component based tool, and
any
other relevant information on the product?
Thanks,
Robert Brooke
Application Developer
Michelin North America (Canada) Inc. CA0/CA1
PO Box 399
New Glasgow, Nova Scotia
B2H-3E6
Phone: (902) 753-1977
Fax: (902) 396-2180
Note: We are currently developing in Forte 3.0.L.2. However, we would
like
to select a reporting tool/component within the next month. We are in the
initial phases of our next project, an application to be developed
in-house.
Probably will have two databases, one for real-time data and another one
for
archived data. Probably will need reporting functionality and capabilities
for
both real-time data and archived data.
This email and any files transmitted with it are confidential and
intended solely for the use of the individual or entity to whom they
are addressed. If you have received this email in error please notify
the system manager.
This footnote also confirms that this email message has been swept by
MIMEsweeper for the presence of computer viruses.
The E-Mail System is to be used for business purposes only.
www.mimesweeper.com
For the archives, go to: http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: forte-users-requestlists.xpedior.com

At 09:33 AM 4/20/01, Rottier, Pascal wrote:
Forte 4GL is:
1) A language, TOOL (Compare to Java)
2) An IDE (Compare to e.g. JBuilder or FJCE)
3) A collaborative development environment, with central repository (Compare
to ????)
4) A distributed application server / object request broker (Compare to J2EE
servers and/or CORBA)Let's not forget WebEnterprise, Express, and especially Fusion.
I think, SUN is not al all interested in TOOL.If TOOL were just a language and had no market yet, you are probably
right. But, not only is TOOL the key to the Forte environment, but it has
an existing and profitable market. Sun still sells FORTRAN, after all, and
continues to put money into ADE development for all its language
products. The real kicker, though, is that I think iPlanet is very clear
that Fusion, now iIS, is a very key product for them. There may be those
who wish it were written in Java and who might lobby for doing a Java
version, but it was clear at the conference that the iPlanet management
recognize that Java just isn't up to the task at this point. It isn't as
if all the iPlanet tools are actually written in Java, after all.
They will only support them for as long as they need.Or, more likely, for as long as they make money.
Now, in response to Microsofts .NET stratagy. We have yet to see how
succesfull this will be, but I expect Microsoft to push this down the
throats of developers and companies quite succesfully.Like they did DCOM?
=========================================================================
Thomas Mercer-Hursh, Ph.D email: [email protected]
Computing Integrity, Inc. sales: 510-233-9329
550 Casey Drive - Cypress Point support: 510-233-9327
Point Richmond, CA 94801-3751 fax: 510-233-6950

Can another reporting tool use the metadata from BI Server?

Does anyone know if an external reporting tool can use the metadata and security that exists in the Repository? We want to leverage the metadata in the BI Server using a tool other than Answers.

Hi
You have an option. There is a client tool 'Oracle BI Publisher Client' where you will be able to see the Presentation columns and create your own reports there. I have used this before in word and I guess it is still the same way for Excel. Check for yourself. The difference between BI Office plug-in and Oracle BI Publisher Desktop is that later allows to see columns to create new reports.
BI Publisher is Advanced Reporting in BI EE Plus
• BI Server semantic layer as a data source
• BI Answers request as a data source
• BI Publisher report in a Dashboard w/ prompts
• Security
Verify for Excel though.
Good Luck

Catalog Manager Error when using the Create Report under Tools

When trying to save the output from the Create Report option under Tools in the Catalog Manager, I get "An Internal error has occurred during: 'Catalog Report'".
Has anyone else encountered this or does anyone have a suggestion?
Thanks

Hi Thaigo,
We are also having the same problem with 2004s SP9 and SP10.
1. All the 0TCA* are active.
2. Super admin role is assigned.
But still getting the above three errors. Somebody who have overcome this problem please share the corresponding changes to be made in KM Configuration
Thanks and Regards
Giri Nath

Problem when we created the managed server to configure different ports.

I am trying to configure different ports for admin console and my communication service as we can’t share admin port to the outside world.
So that only admin can access admin console using admin port.
And out side clients can access my webapplication using different port.
For this i have created the managed server in weblogic.and I deployed the application on managed server.
Now admin server is running on 8001 port and my Communication Service application is running on 7001 port.
But when I tried to configure MBeans related to myCommunicationServiceApplication those were disapper on admin console. And the other wlng services are appearing on admin console.
1. Since my application deployed on managed server MBeans registration happened from myapplication hence it’s disappear on admin console.
Now If I want to configure Mbeans (related to my communication service) how can I configure it?
2. My communication service using configurationStore module and other wlng services.
When I tried to start my application on managed server I got the below error:
<Apr 28, 2009 12:22:44 PM IST> <Error> <Deployer> <BEA-149231> <dscp11166.TechMahindra.com> <Unable to set the activation state to true for the application 'wlng_nt_qualcomm_active_mediation [Version=1.0]'.
com.bea.wlcp.wlng.api.storage.configuration.ConfigurationException: Configuration store module is not available.
3. I tried to target all wlngResources to manged server by editing config.xml file.
Then all wlng services disappears on admin console. If this is the case how can I configure container/account services on wlng?
I have created the Basicweblogic domain.
Below is the config.xml for reference.
"QualcommServer" is managed server name.
Can any one please suggest me how to configure this kind of scenarios?
<server>
<name>AdminServer</name>
<machine>new_Machine_1</machine>
<listen-port>8001</listen-port>
<default-iiop-user>weblogic</default-iiop-user>
<default-iiop-password-encrypted>{3DES}W8nBdoJPRZ8TkwcXwAZoxA==</default-iiop-password-encrypted>
<listen-address>localhost</listen-address>
</server>
<server>
<name>QualcommServer</name>
<machine>new_Machine_1</machine>
<listen-address>localhost</listen-address>
<server-start>
<java-vendor>Sun</java-vendor>
<java-home>C:\Program Files\Java\jdk1.6.0</java-home>
<class-path>C:\bea\wlng400\server\lib\weblogic.jar;C:\bea\wlng_pds400\lib\wlng\wlng.jar</class-path>
<bea-home>C:\bea</bea-home>
<username>weblogic</username>
<password-encrypted>{3DES}W8nBdoJPRZ8TkwcXwAZoxA==</password-encrypted>
</server-start>
</server>
<embedded-ldap>
<name>managedserver</name>
<credential-encrypted>{3DES}9q80YuFJueVVJxoWduJA1OGhbqk14EpgQWWyTrzlmxo=</credential-encrypted>
</embedded-ldap>
<configuration-version>10.0.1.0</configuration-version>
<app-deployment>
<name>wlng_nt_session#4.0</name>
<target>QualcommServer</target>
<module-type>ear</module-type>
<source-path>C:\bea\wlng400/applications/wlng_nt_session.ear</source-path>
<security-dd-model>CustomRolesAndPolicies</security-dd-model>
</app-deployment>
<app-deployment>
<name>interceptors</name>
<target>QualcommServer</target>
<module-type>ear</module-type>
<source-path>C:\bea\wlng400/applications/interceptors.ear</source-path>
<security-dd-model>CustomRolesAndPolicies</security-dd-model>
</app-deployment>
<app-deployment>
<name>wlng_prm</name>
<target>QualcommServer</target>
<module-type>ear</module-type>
<source-path>C:\bea\wlng400/applications/wlng_prm.ear</source-path>
<security-dd-model>CustomRolesAndPolicies</security-dd-model>
</app-deployment>
<app-deployment>
<name>wlng_nt_qualcomm_active_mediation#1.0</name>
<target>QualcommServer</target>
<module-type>ear</module-type>
<source-path>servers\AdminServer\upload\wlng_nt_qualcomm_active_mediation.ear</source-path>
<security-dd-model>DDOnly</security-dd-model>
</app-deployment>
<machine>
<name>new_Machine_1</name>
<node-manager>
<name>new_Machine_1</name>
<listen-address>localhost</listen-address>
</node-manager>
</machine>
<jms-server>
<name>JMSServer-AdminServer</name>
<target>AdminServer</target>
</jms-server>
<jms-system-resource>
<name>WLNGJMSResource</name>
<target>QualcommServer</target>
<descriptor-file-name>jms/wlng-jms.xml</descriptor-file-name>
</jms-system-resource>
<custom-resource>
<name>networktier</name>
<target>AdminServer</target>
<descriptor-file-name>custom/nt.xml</descriptor-file-name>
<resource-class>com.bea.wlcp.wlng.management.descriptor.resource.WlngTierResource</resource-class>
<descriptor-bean-class>com.bea.wlcp.wlng.management.descriptor.bean.WlngTierBean</descriptor-bean-class>
</custom-resource>
<custom-resource>
<name>wlng-edr</name>
<target>AdminServer</target>
<descriptor-file-name>custom/wlng-edr.xml</descriptor-file-name>
<resource-class>com.bea.wlcp.wlng.management.descriptor.resource.WlngEdrResource</resource-class>
<descriptor-bean-class>com.bea.wlcp.wlng.management.descriptor.bean.WlngEdrBean</descriptor-bean-class>
</custom-resource>
<admin-server-name>AdminServer</admin-server-name>
<jdbc-system-resource>
<name>wlng.datasource</name>
<target>QualcommServer</target>
<descriptor-file-name>jdbc/wlng-jdbc.xml</descriptor-file-name>
</jdbc-system-resource>
<jdbc-system-resource>
<name>wlng.localTX.datasource</name>
<target>QualcommServer</target>
<descriptor-file-name>jdbc/wlng-localTX-jdbc.xml</descriptor-file-name>
</jdbc-system-resource>
Thanks,
Srinu Babu P

Dear Nariharan,
Today I faced a simlar issue, and this SAP Note helped me fix it: 1966807 - Duplication of AET table records in change processing
In my case, cardinality of AET table was 1:1, and I was getting duplicate PARENT_ID every time when trying to create a subsequent service request for my activity.
Regards,
Andrew

Performance in the Server with the created report - Crystal Report 2008

Hi
      We have developed a complex report and deployed in the server. It takes more time to process and once if the report created and we are trying to expand a group/navigate different pages, the same time delay is happeneing. Sometimes it takes more than a minute which really kills the performance. My client has accepted the delay while the report is being genrated but they raise question like why it takes too much time just to display the created report.
I tried keeping the created report in Session and rebind on page_load as well stored a copy on the server and rebind whenver postback happens. Both methods working simliar and no improvement the in the performance. Is there any way to kill the time delay in this.( we have an idea like , if we store the created report at client machine and whenever postback happens just bind from client machine instead to hit the server back, Is this achievable)
Any Help would helpful to me
Thanks

Hi
What version of CR are you using?
     Crystal report 2008, I think its in subject of this thread itself. (Version 12.0.0.683)
What if any CR SP have you applied?
    No
What version of .NET are you using?
.Net 3.5 using C# technology (.Net framework 3.5)
What database are you using?
    SQL Server2008
What connection type are you using?
   We have created a Stored Procedure and connected the SP to the crystal report.
What are you comparing the performance to? E.g.; is it faster somewhere else? How much faster?
    No, we didnt compare anywhere. but my question is to avoid the delay in navigation of pages or selecting an item in the group tree. The report contains 100+ pages and client is accepting delay while creating the report but not during navigation or selection( why do the already created report takes more time(even in minutes) to render on navigation or selection and how to avoid the delay))
Define "complex report ".
Nothing complexity in the report even we have used oly less formulas(less than 5) but chats are included and used for each group( we have 6 groups in the report)
Thanks

Error -32810 occurred at The FieldPoint server initialization failed. Possible causes: 1. Missing or corrupt configuration file; 2. Failed to create callbacks. : FP Open.vi

I have two cFP-2120 RT controller. They both have NI-Serial RT2.5.6, DataSocket for LV RT4.2, NI-VISA 3.6, FP Drivers 5.1.0, FP VI Manager 3.1.0 LV RT 7.1.1 installed. But one same vi can run on one controller but not another.
the error message got when it runs on another controller is "Error -32810 occurred at The FieldPoint server initialization failed. Possible causes: 1. Missing or corrupt configuration file; 2. Failed to create callbacks. : FP Open.vi"
I wonder by what it is caused?
Thanks

Hi Matthew,
As mentioned previously, this KnowledgeBase article may be of some help. Also, if your code is being run on an embedded controller and then a network controller (not embedded), you will need to run the program differently. On the embedded controller, you should deploy your VI in a Project Explorer or programmatically (as described here.) However, you do not need to deploy the program to a network controller, but simply run the VI.
I would also suggest creating a new .IAK file. Do you still see the same error? Also, double-check that the software installed on the controller matches the software installed on the host PC. If you have any file paths associated with one FieldPoint controller, ensure that you are changing them to match the second controller.
Please keep us posted on your troubleshooting steps. Have a great day!
Amanda Howard
Americas Services and Support Recruiting Manager
National Instruments

How to open a file created at the server through form/report at client end

How to open a file created at the server through form/report at client end
Dear Sir/Madame,
I am creating a exception report at the server-end using utl file utility. I want to display this report at the client end. A user doesn't have any access to server. Will u please write me the solution and oblige me.
Thanks
Rajesh Jain

One way of doing this is to write a PL/SQL procedure that uses UTL_FILE to read the file and DBMS_OUTPUT to display the contents to the users.
Cheers, APC

How to create a Desktop based reporting tool

Regarding the Rreporting tool . Here I am mentioning the key points of my requirement,
As a first step the user creates the table linking and Alias naming.
Need a GUI kind of reporting tool, Where the user can drag and drop the tables, In that he can build the relations among the tables (if any exists).. User should be given a provision to make alias names for tables and columns. Then saves his report
In the second step user can check his saved report and select the columns . Based on the selected columns a query should be populated automatically with all the selected columns and where clauses based on the links/joins with the user given alias names (if any). Based on this the report should be generated..
I know there are many reporting calls like BIRT,Pentao. But the thing is when I am working or developing on these tools its design is fixed and file gets generated. which can viewed in that editor only.. (like .reportdesign, .report, .rptcustom)
Here please tell me which tool to use and how to start with.
Here the tool can be a desktop application or a war file. (This complete thing should be a GUI based)
--> It should connect to a database and show the list of tables ( or set of tables which are already stored in DB)
--> based on table selection we should display columns of that table
--> if multiple tables are there we should show relations between tables ( if any exists)
( the relations will be already stored in back-end tables, just we need to check any relation exist or not)
--> User should be a given a option to provide alias naming for tables and columns
--> User should save the complete set as a report (with alias names also if any provided by user)
--> when once we save the report we should provide a option to run the report and display the result.

What have you coded so far?
If you are looking for someone to do it for you, then be aware: this is not a do my project for me service, but many of the people on here do consulting at 100+ USD per hour. Check one of your local services and I'm sure you can find a local deveoper to do your project for you.

Create report output to the Client of the Application Server inst.of Server

Hi,
Please suggest the soution for the below:
We are using SET_REPORT_OBJECT_PROPERTY and WEB.SHOW_DOCUMENT to create report. Now Requirement is to save the report output to Client instead of server. I tried to use WEBUTIL but web util can be used from form only becuase that is using form item.
(1) We are calling all our report from a form. Is there any option to trigger a action when ever a report job is created in Application server (report server)
(2) Please let me now is there any option to create the output directly to client of application server 10G R1WIN , 10GR2WIN or in 11G. If yes please let me know the details.
Wtih Thanks & Regards
K.Sundar
Edited by: 870860 on Jul 13, 2011 10:27 PM

Hi,
Please suggest the soution for the below:
We are using SET_REPORT_OBJECT_PROPERTY and WEB.SHOW_DOCUMENT to create report. Now Requirement is to save the report output to Client instead of server. I tried to use WEBUTIL but web util can be used from form only becuase that is using form item.
(1) We are calling all our report from a form. Is there any option to trigger a action when ever a report job is created in Application server (report server)
(2) Please let me now is there any option to create the output directly to client of application server 10G R1WIN , 10GR2WIN or in 11G. If yes please let me know the details.
Wtih Thanks & Regards
K.Sundar
Edited by: 870860 on Jul 13, 2011 10:27 PM

Custom tool error for COMexception: The report application server failed.

hi there,
i am using crystal reports for the last one year onwards, i don't get any errors till know. Yesterday when i modified some information in 40 reports. out of these reports 34 reports are successfully build, but for the remaining six reports the code is not generating.
Custom tool error: "Code generator 'ReportCodeGenerator' failed. Exception stack = CrystalDecisions.Shared.CrystalReportsException: Load report failed. ---> System.Runtime.InteropServices.COMException: The Report Application Server failed
   at CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass.Open(Object& DocumentPath, Int32 Options)
   at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.Open(Object& DocumentPath, Int32 Options)
   at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened()
   --- End of inner exception stack trace ---
   at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened()
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob)
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename)
   at CrystalDecisions.VSDesigner.CodeGen.ReportClassWriter..ctor(String filePath)
   at CrystalDecisions.VSDesigner.CodeGen.ReportClassWriter..ctor(String filePath, String resourceNamespace)
   at CrystalDecisions.VSDesigner.CodeGen.ReportCodeGenerator.GenerateCode(String inputFileName, String inputFileContent)"
i am not understanding why it is getting for me, Please help me

Hello,
Whoever wrote the CustomCodeGenerator will have to help you with this one. We know nothing about the underlying code they are using and therefore can't determine the cause.
Appears the error is it can't even load the report so there is something wrong with the workings. Open the report again in CR Designer and Verify Database and then check the changes you did. Something is not right or the DB driver their application is using does not match with what you are using.
Don

OFM 11 Configuration Err: Creating Reports Tools + Server Components Failed

Similar Messages

Maybe you are looking for