OFS Verified Oracle group failed

Dear All,
We verified OFS Oracle group failed, and we found below error information:
FS-10890: Oracle Services for MSCS failed during the verifyGroup operation
FS-10111: Failed to verify group ORACLE PIP
FS-10046: Failed to verify group resource OraclePIP11202TNSListenerFslmaspipdb
FS-10151: Unable to open the parameter file D:\oracle\PIP\11202\database\initPIP_OFS.ora
FS-10180: File D:\oracle\PIP\11202\database\initPIP_OFS.ora is not found
0x3: The system cannot find the path specified.
We checked this file is exist in correct path.( D:\oracle\PIP\11202\database)
Anyone can help us? thank you in advance.
Best Regards,
Kent
More log as below
Versions: client = 3.4.2    server = 3.4.2    OS =
Operation:   Verifying group "ORACLE PIP"
Starting Time:   Jan 04, 2014   12:37:42
Elapsed Time:   0 minutes, 3 seconds
1   12:37:42 Starting clusterwide operation
2   12:37:42 FS-10371: MASSAP07 : Performing initialization processing
3   12:37:43 FS-10371: MASSAP09 : Performing initialization processing
4   12:37:43 FS-10373: MASSAP07 : Determining owner node of resource
5   12:37:43 FS-10374: MASSAP07 : Gathering cluster information needed to perform the specified operation
6   12:37:43 FS-10374: MASSAP09 : Gathering cluster information needed to perform the specified operation
7   12:37:43 FS-10461: MASSAP07 : Starting verification of group ORACLE PIP
8   12:37:43 FS-10463: MASSAP07 : Verifying group attributes for group ORACLE PIP
9   12:37:43 FS-10464: MASSAP07 : Verifying attributes for resources in group ORACLE PIP
10 12:37:43   > FS-10315: Verifying disk resource Cluster Disk 3
11 12:37:43   > FS-10310: Verifying the IP address resource IP Address 10.236.149.43
12 12:37:43   > FS-10325: Verifying the network name resource Network Name MASPIPDB
13 12:37:43   > FS-10300: Verifying Oracle Net listener resource OraclePIP11202TNSListenerFslmaspipdb
14 12:37:44   > FS-10320: Verifying database resource PIP.WORLD
15 12:37:44 FS-10465: MASSAP07 : Verifying dependencies for resources in group ORACLE PIP
16 12:37:44   > FS-10316: Verifying dependencies for disk resource Cluster Disk 3
17 12:37:44   > FS-10311: Verifying the dependencies for IP address resource IP Address 10.236.149.43
18 12:37:44   > FS-10326: Verifying dependencies for the network name resource Network Name MASPIPDB
19 12:37:44   > FS-10301: Verifying dependencies for Oracle Net listener resource OraclePIP11202TNSListenerFslmaspipdb
20 12:37:44   > FS-10321: Verifying dependencies for database resource PIP.WORLD
21 12:37:44    ** WARNING : FS-10288: Parameter file D:\oracle\PIP\11202\database\initPIP_OFS.ora is not located on a cluster disk
22 12:37:44 FS-10466: MASSAP07 : Verification of group ORACLE PIP completed successfully
23 12:37:45 FS-10461: MASSAP09 : Starting verification of group ORACLE PIP
24 12:37:45 FS-10463: MASSAP09 : Verifying group attributes for group ORACLE PIP
25 12:37:45 FS-10464: MASSAP09 : Verifying attributes for resources in group ORACLE PIP
26 12:37:45   > FS-10315: Verifying disk resource Cluster Disk 3
27 12:37:45   > FS-10310: Verifying the IP address resource IP Address 10.236.149.43
28 12:37:45   > FS-10325: Verifying the network name resource Network Name MASPIPDB
29 12:37:45   > FS-10300: Verifying Oracle Net listener resource OraclePIP11202TNSListenerFslmaspipdb
30 12:37:45    ** ERROR : 0x3: The system cannot find the path specified.
31 12:37:45    ** ERROR : FS-10180: File D:\oracle\PIP\11202\database\initPIP_OFS.ora is not found
32 12:37:45    ** ERROR : FS-10151: Unable to open the parameter file D:\oracle\PIP\11202\database\initPIP_OFS.ora
33 12:37:45    ** ERROR : FS-10046: Failed to verify group resource OraclePIP11202TNSListenerFslmaspipdb
34 12:37:45    ** ERROR : FS-10111: Failed to verify group ORACLE PIP
35 12:37:45    ** ERROR : FS-10890: Oracle Services for MSCS failed during the verifyGroup operation
36 12:37:45 Please check your Windows Application log using the Event Viewer for any additional errors
37 12:37:45 The clusterwide operation failed !

Its just the too many open files caused by the bug in collecting the health metrics (see Note:430805.1, 563575.1).
Disable the health metrics Note:379423.1
If you're worried about doing this, read Note:469227.1

Similar Messages

......Trusted Recon With Oracle 11g Fail. All details explained

Ok...... How can I delete this post? ---- > I resolve the issues......
Hi, When I create the trusted Recon, connector sendme:
ERROR [ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)' org.apache.struts.actions.DispatchAction - Request[CreateConnector] does not contain handler parameter named method
follow by
ERROR [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' XELLERATE.SERVER - Class/Method: tcTableDataObj/setTimestamp encounter some problems: {1}
java.lang.NullPointerException
     at com.thortech.xl.dataobj.tcDataSet.setTimestamp(Unknown Source)
     at com.thortech.xl.dataaccess.tcDataSet.setTimestamp(Unknown Source)
     at com.thortech.xl.dataobj.tcTableDataObj.setTimestamp(Unknown Source)
     at com.thortech.xl.ddm.instance.visitor.ImportVisitor.visitStarted(Unknown Source)
===================================================================
Hi, I think I need to re install the GTC or OIM because all works fine (Recon with AD, Exchange... DataBase Provisioning) But when Im try to Recon with Oracle Databse11g Fails.
I read the manuals but nothing..... ok I do the next configs:
- Generic Technology Connector
- Create
=========================*Step 1*=================
Name                              ReconCity
Transport Provider (Reconciliation)................Database Application Tables Reconciliation
Format Provider (Reconciliation).....................Database Application Tables Reconciliation
Trusted Source Reconciliation.........................Selected
========================*Step 2*==================
Database Drive : oracle.jdbc.driver.OracleDriver
Database URL : jdbc:oracle:thin:@192.168.1.101:1521:DFGOB
Database User ID : system
Database Pass......: my_pass
parent Table/View
Name.......................: Recon_Users
Batch Size...............: All
Stop Reconciliat
ion Threshold..........: None
Stop Threshold........: None
Sourcedate Format: yyyy/MM/dd hh:mm:ss z
Reconcile Deletion
of Multival.................: "Selected"
Reconciliation
Type..........................: Full
========================*Step 3 (try 1)*===========
SOURCE.................*RECON STAGING*.......................*OIM*
USER_ID--------------> USER_ID -------------> User ID
FIRTS_NAME--------> FIRST_NAME ----------> FIRST_NAME
LAST_NAME---------> LAST_NAME ----------> . --> Yes, I map all fields to OIM
PASSWORD----------> PASSWORD ---------> .
EMAIL------------------> EMAIL ----------------> .
STATUS---------------> STATUS --------------> .
..........|Xellerate |--> ORGANIZATION ------------> .
..........|End-User |------> EMPLOYEE TYPE -----> .
..........|Full-Time |-------> USER TYPE ------------> .
- (STATUS values from my database table is: Active or Disabled)
- ( I try (Enabled/Disabled) )
For Fields USER_ID to STATUS
(Edit option)
Dataset.......................: Reconciliation Staging
Child Dataset Name :
Field Name.................: USER_ID
Mapping Action..........: Create mapping Without Transformation
Matching Only............: Not Applicable
Case-Insensitive........: Not Applicable
Data Type      *.............: String
Required.....................: Selected
For Fields ORGANIZATION to USER TYPE
(Add option)
Dataset........................: Reconciliation Staging
Child Dataset Name :
Field Name.................: ORGANIZATION
Mapping Action..........: Create mapping Without Transformation
Matching Only.............: Not Applicable
Case-Insensitive........: Not Applicable
Data Type      *.............: String
Required.....................: Selected
Input
Literal: Xellerate
===After save on step 4 I go to Resource Manager-->Manage Scheduled task--> RUN NOW and the log send me
DEBUG QuartzWorkerThread-4 XELLERATE.ADAPTERS - Class/Method: tcStructureUtil/getUserDefinedCols entered.
ERROR QuartzWorkerThread-4 XELLERATE.APIS - Class/Method: tcReconciliationOperationsBean/ignoreEventData encounter some problems: {1}
java.lang.NullPointerException
     at com.thortech.xl.dataobj.util.tcAttributeSource.getAttrColumnName(Unknown Source)
     at com.thortech.xl.dataobj.util.tcReconciliationUtil.getRuleElementWhere(Unknown Source)
     at com.thortech.xl.dataobj.util.tcReconciliationUtil.getRuleWhere(Unknown Source)
     at com.thortech.xl.dataobj.util.tcReconciliationUtil.getMatchedUserList(Unknown Source)
     at com.thortech.xl.dataobj.util.tcReconciliationUtil.getMatchedUserList(Unknown Source)
     at com.thortech.xl.dataobj.util.tcReconciliationUtil.ignoreEvent(Unknown Source)
     at com.thortech.xl.ejb.beansimpl.tcReconciliationOperationsBean.ignoreEventData(Unknown Source)
     at com.thortech.xl.ejb.beansimpl.tcReconciliationOperationsBean.ignoreEvent(Unknown Source)
     at com.thortech.xl.ejb.beans.tcReconciliationOperationsSession.ignoreEvent(Unknown Source)
     at com.thortech.xl.ejb.beans.tcReconciliationOperations_gmh3ba_EOImpl.ignoreEvent(tcReconciliationOperations_gmh3ba_EOImpl.java:692)
     at Thor.API.Operations.tcReconciliationOperationsClient.ignoreEvent(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at Thor.API.Base.SecurityInvocationHandler$1.run(Unknown Source)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(Unknown Source)
     at weblogic.security.Security.runAs(Security.java:41)
     at Thor.API.Security.LoginHandler.weblogicLoginSession.runAs(Unknown Source)
     at Thor.API.Base.SecurityInvocationHandler.invoke(Unknown Source)
     at $Proxy62.ignoreEvent(Unknown Source)
     at com.thortech.xl.gc.runtime.GCScheduleTask.execute(Unknown Source)
     at com.thortech.xl.scheduler.tasks.SchedulerBaseTask.run(Unknown Source)
     at com.thortech.xl.scheduler.core.quartz.QuartzWrapper$TaskExecutionAction.run(Unknown Source)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(Unknown Source)
     at weblogic.security.Security.runAs(Security.java:41)
     at Thor.API.Security.LoginHandler.weblogicLoginSession.runAs(Unknown Source)
     at com.thortech.xl.scheduler.core.quartz.QuartzWrapper.execute(Unknown Source)
     at org.quartz.core.JobRunShell.run(JobRunShell.java:178)
     at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:477)
ERROR QuartzWorkerThread-4 XELLERATE.GC.FRAMEWORKRECONCILIATION - Reconciliation Encountered error:
Thor.API.Exceptions.tcAPIException: java.lang.NullPointerException
     at com.thortech.xl.ejb.beansimpl.tcReconciliationOperationsBean.ignoreEventData(Unknown Source)
     at com.thortech.xl.ejb.beansimpl.tcReconciliationOperationsBean.ignoreEvent(Unknown Source)
     at com.thortech.xl.ejb.beans.tcReconciliationOperationsSession.ignoreEvent(Unknown Source)
     at com.thortech.xl.ejb.beans.tcReconciliationOperations_gmh3ba_EOImpl.ignoreEvent(tcReconciliationOperations_gmh3ba_EOImpl.java:692)
     at Thor.API.Operations.tcReconciliationOperationsClient.ignoreEvent(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at Thor.API.Base.SecurityInvocationHandler$1.run(Unknown Source)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(Unknown Source)
     at weblogic.security.Security.runAs(Security.java:41)
     at Thor.API.Security.LoginHandler.weblogicLoginSession.runAs(Unknown Source)
     at Thor.API.Base.SecurityInvocationHandler.invoke(Unknown Source)
     at $Proxy62.ignoreEvent(Unknown Source)
     at com.thortech.xl.gc.runtime.GCScheduleTask.execute(Unknown Source)
     at com.thortech.xl.scheduler.tasks.SchedulerBaseTask.run(Unknown Source)
     at com.thortech.xl.scheduler.core.quartz.QuartzWrapper$TaskExecutionAction.run(Unknown Source)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(Unknown Source)
     at weblogic.security.Security.runAs(Security.java:41)
     at Thor.API.Security.LoginHandler.weblogicLoginSession.runAs(Unknown Source)
     at com.thortech.xl.scheduler.core.quartz.QuartzWrapper.execute(Unknown Source)
     at org.quartz.core.JobRunShell.run(JobRunShell.java:178)
     at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:477)
WARN QuartzWorkerThread-4 XELLERATE.GC.FRAMEWORKRECONCILIATION - Though Reconciliation Scheduled task has encountered an error, Reconciliation Transport providers have been "ended" smoothly. Any provider operation that occurs during that "end" or "clean-up" phase would have been executed e.g. Data archival. In case you want that data to be a part of next Reconciliation execution, restore it from Staging. Provider logs must be containing details about storage entities that would have been archived
==========================================
========================*Step 3 (try 2)*==============
SOURCE..................*RECON STAGING*....................*OIM*
USER_ID--------------> USER_ID -------------> User ID
FIRTS_NAME--------> FIRST_NAME ----------> FIRST_NAME
LAST_NAME---------> LAST_NAME ----------> .
PASSWORD----------> PASSWORD ----------> .
EMAIL------------------> EMAIL -----------------> .
........|Xellerate |--> ORGANIZATION -------------> .
........|End-User |------> EMPLOYEE TYPE ------> .
........|Full-Time|-------> USER TYPE --------------> .
........|Active |------> SATUS -----------------> .
- (On STATUS I try (*Active/Enabled/Disabled*) )
For Fields USER_ID to EMAIL
(Edit option)
Dataset.......................: Reconciliation Staging
Child Dataset Name :
Field Name.................: USER_ID
Mapping Action.........: Create mapping Without Transformation
Matching Only.............: Not Applicable
Case-Insensitive.........: Not Applicable
Data Type      *..............: String
Required.......................: Selected
For Fields ORGANIZATION to STATUS
(Add option)
Dataset.......................: Reconciliation Staging
Child Dataset Name :
Field Name................: STATUS
Mapping Action..........: Create mapping Without Transformation
Matching Only............: Not Applicable
Case-Insensitive........: Not Applicable
Data Type      *.............: String
Required......................: Selected
Input
Literal: Active
===After save on step 4 I go to Resource Manager-->Manage Scheduled task--> RUN NOW and the log sende me the same ERRROR posted up.
===============Step 3 (try 3)=======================
SOURCE...................*RECON STAGING*...................... OIM
USER_ID--------------> USER_ID -----------> User ID
FIRTS_NAME--------> FIRST_NAME ----------> FIRST_NAME
LAST_NAME---------> LAST_NAME ----------> .
PASSWORD----------> PASSWORD ----------> .
EMAIL------------------> EMAIL ------------> .
USER_STATUS----| T |--> USER_STATUS ---> .
.....................................|
.........................|Lookup.M4..|
............|Xellerate |--> ORGANIZATION ------------> .
............|End-User |------> EMPLOYEE TYPE ------> .
............|Full-Time |-------> USER TYPE -------------> .
- (USER_STATUS have the next Values: True/False)
For Fields USER_ID to EMAIL
(Edit option)
Dataset.......................: Reconciliation Staging
Child Dataset Name :
Field Name.................: USER_ID
Mapping Action..........: Create mapping Without Transformation
Matching Only.............: Not Applicable
Case-Insensitive.........: Not Applicable
Data Type      *..............: String
Required......................: Selected
For Fields ORGANIZATION to USER_TYPE
(Add option)
Dataset........................: Reconciliation Staging
Child Dataset Name :
Field Name................: ORGANIZATION
Mapping Action..........: Create mapping Without Transformation
Matching Only............: Not Applicable
Case-Insensitive........: Not Applicable
Data Type      *.............: String
Required.....................: Selected
Input
Literal: Xellerate
Dataset.......................: Reconciliation Staging
Child Dataset Name:
Field Name................: USER_STATUS
Mapping Action.........: Create Mapping with Translation
Matching Only...........: Not Applicable
Case-Insensitive.......: Not Applicable
Data Type      *............: String
Required....................: Selected
Field Name USER_STATUS
Input
Dataset........:Source
Field Name :USER_STATUS
Lookup Code Name
Literal...........: Lookup.M4.Recon
===============
Lookup Definition
Code : Lookup.M4Recon
Field:
Lookup Type(Selected)
Required (Not Selected)
Group: Object
Lookup Code Info
| Code Key | Decode |
1 | True/False | Active/Disabled|
===After save on step 4 I go to Resource Manager-->Manage Scheduled task--> RUN NOW and the log sende me the same ERROR posted up.=============
I hope you can help me, Thanks.....
Edited by: user11296330 on Oct 18, 2009 8:55 PM
Edited by: user11296330 on Oct 18, 2009 10:10 PM
Edited by: user11296330 on Oct 19, 2009 3:33 PM
Edited by: user11296330 on Oct 20, 2009 1:52 AM
Edited by: user11296330 on Oct 21, 2009 9:08 AM
Edited by: user11296330 on Nov 8, 2009 10:16 PM
Edited by: user11296330 on Nov 8, 2009 10:20 PM

Hi amigo I solve my problem with the next:
OK, all above is good but in the manual they mistake something.... one step.
(All succesful with --> ========================*Step 3 (try 2)*==============)
1.- Ok, if you got every thing like above the last thing you need is follow the next link:
http://www.oracle.com/technology/obe/fusion_middleware/im1014/oim/obe12_using_gtc_for_reconciliation/using_the_gtc.htm
Go to: "Modifying the GTC" ( just do this part)
Restart the OIM and Enjoy it.
Good day Amigo.
And don't forget on step three:
Click the Edit icon of the User ID field of the OIM - User data set.
b. On the Step 1: Provide Field Information page:
- From the Mapping Action list, select Create Mapping Without Transformation.
- Select Matching Only.
- Click Continue.
Mapping Information page, select Reconciliation
Staging from the Dataset list, select EMPLOYEE_ID (your ID Field) from the Field Name
list, and then click Continue.
If something go bad, tell me the steps like I did with the log.... see ya
Edited by: user11296330 on Nov 8, 2009 9:57 PM
Edited by: user11296330 on Nov 8, 2009 10:21 PM

Rs-ora:resource group failed to start on chosen node; it may end up failing

I have configured two node failover cluster environment using netra a/d 1000 storage. When I try to deploy oracle server application it throws the following error
rs-ora: resource group failed to start on chosen node; it may end up failing over to other node(s)
I created metaset and gave one raw did disk to that metaset.
I created logical hostname resource, ha-storage plus resource. Later I brought the resource group to online using following command
#clrg online emM rg-ora
Later I created oracle cluster resource using following command.
#clrs create -g rg-ora -t SUNW.oracle_server -p ORACLE_HOME=/global/oracle/product/10.2.0/db_1 -p ORACLE_SID=infra -p Alert_log_file=/global/oracle/product/10.2.0/db_1/admin/infra/bdump/alert_infra.log -p Connect_string=sysdba/dbadmin1@infra -p Resource_dependencies=rs-ora-has rs-ora
node1 - Validation failed. ORACLE_HOME /global/oracle/product/10.2.0/db_1 does not exist
node1 - ALERT_LOG_FILE /global/oracle/product/10.2.0/db_1/admin/infra/bdump/alert_infra.log doesn't exist
node1 - PARAMETER_FILE: /global/oracle/product/10.2.0/db_1/dbs/initinfra.ora nor server PARAMETER_FILE: /global/oracle/product/10.2.0/db_1/dbs/spfileinfra.ora exists
node1 - This resource depends on a HAStoragePlus resouce that is not online on this node. Ignoring validation errors.
rs-ora: resource group failed to start on chosen node; it may end up failing over to other node(s)
The status of oracle resource shows as follows.
Resource Name Node Name State Status Message
rs-ora node1 Start failed Faulted
I used solaris 10 update 6 patch level is Generic_137137-09, Oracle version 10.2.0, Sun clusters 3.2 update1. Following are the vfstab and /var/adm/messages of both nodes.
Node1#grep ora /etc/vfstab
/dev/md/oradg/dsk/d300 /dev/md/oradg/rdsk/d300 /global/oracle ufs 5 no logging
Node2#grep ora /etc/vfstab
/dev/md/oradg/dsk/d300 /dev/md/oradg/rdsk/d300 /global/oracle ufs 5 no logging
Node1#more /var/adm/messages
Oct 17 05:19:17 node1 Cluster.RGM.rgmd: [ID 224900 daemon.notice] launching method <hafoip_prenet_start> for resource <ha-
host-1>, resource group <rg-ora>, node <node1>, timeout <300> seconds
Oct 17 05:19:17 node1 Cluster.RGM.rgmd: [ID 751138 daemon.notice] 47 fe_rpc_command: cmd_type(enum):<1>:cmd=</usr/cluster/
lib/rgm/rt/hafoip/hafoip_prenet_start>:tag=<rg-ora.ha-host-1.10>: Calling security_clnt_connect(..., host=<node1>, sec_typ
e {0:WEAK, 1:STRONG, 2:DES} =<1>, ...)
Oct 17 05:19:17 node1 Cluster.RGM.rgmd: [ID 515159 daemon.notice] method <hafoip_prenet_start> completed successfully for
resource <ha-host-1>, resource group <rg-ora>, node <node1>, time used: 0% of timeout <300 seconds>
Oct 17 05:19:17 node1 Cluster.RGM.rgmd: [ID 224900 daemon.notice] launching method <hastorageplus_prenet_start> for resour
ce <rs-ora-has>, resource group <rg-ora>, node <node1>, timeout <1800> seconds
Oct 17 05:19:17 node1 Cluster.RGM.rgmd: [ID 751138 daemon.notice] 47 fe_rpc_command: cmd_type(enum):<1>:cmd=</usr/cluster/
lib/rgm/rt/hastorageplus/hastorageplus_prenet_start>:tag=<rg-ora.rs-ora-has.10>: Calling security_clnt_connect(..., host=<tes
tlab5>, sec_type {0:WEAK, 1:STRONG, 2:DES} =<1>, ...)
Oct 17 05:19:18 node1 Cluster.RGM.rgmd: [ID 375444 daemon.notice] 8 fe_rpc_command: cmd_type(enum):<2>:cmd=<null>:tag=<rg-
ora.rs-ora-has.10>: Calling security_clnt_connect(..., host=<node1>, sec_type {0:WEAK, 1:STRONG, 2:DES} =<0>, ...)
Oct 17 05:19:18 node1 Cluster.RGM.rgmd: [ID 316625 daemon.notice] Timeout monitoring on method tag <rg-ora.rs-ora-has.10>
has been suspended.
Oct 17 05:19:20 node1 Cluster.Framework: [ID 801593 daemon.notice] stdout: becoming primary for oradg
Oct 17 05:19:21 node1 Cluster.RGM.rgmd: [ID 375444 daemon.notice] 8 fe_rpc_command: cmd_type(enum):<3>:cmd=<null>:tag=<rg-
ora.rs-ora-has.10>: Calling security_clnt_connect(..., host=<node1>, sec_type {0:WEAK, 1:STRONG, 2:DES} =<0>, ...)
Oct 17 05:19:21 node1 Cluster.RGM.rgmd: [ID 316625 daemon.notice] Timeout monitoring on method tag <rg-ora.rs-ora-has.10>
has been resumed.
Oct 17 05:19:25 node1 Cluster.RGM.rgmd: [ID 515159 daemon.notice] method <hastorageplus_prenet_start> completed successful
ly for resource <rs-ora-has>, resource group <rg-ora>, node <node1>, time used: 0% of timeout <1800 seconds>
Oct 17 05:19:25 node1 Cluster.RGM.rgmd: [ID 224900 daemon.notice] launching method <hafoip_start> for resource <ha-host-1>
, resource group <rg-ora>, node <node1>, timeout <500> seconds
Oct 17 05:19:25 node1 Cluster.RGM.rgmd: [ID 751138 daemon.notice] 47 fe_rpc_command: cmd_type(enum):<1>:cmd=</usr/cluster/
lib/rgm/rt/hafoip/hafoip_start>:tag=<rg-ora.ha-host-1.0>: Calling security_clnt_connect(..., host=<node1>, sec_type {0:WEA
K, 1:STRONG, 2:DES} =<1>, ...)
Oct 17 05:19:25 node1 Cluster.RGM.rgmd: [ID 515159 daemon.notice] method <hafoip_start> completed successfully for resourc
e <ha-host-1>, resource group <rg-ora>, node <node1>, time used: 0% of timeout <500 seconds>
Oct 17 05:19:25 node1 Cluster.RGM.rgmd: [ID 224900 daemon.notice] launching method <hafoip_monitor_start> for resource <ha
-host-1>, resource group <rg-ora>, node <node1>, timeout <300> seconds
Oct 17 05:19:25 node1 Cluster.RGM.rgmd: [ID 224900 daemon.notice] launching method <hastorageplus_start> for resource <rs-
ora-has>, resource group <rg-ora>, node <node1>, timeout <90> seconds
Oct 17 05:19:25 node1 Cluster.RGM.rgmd: [ID 510020 daemon.notice] 46 fe_rpc_command: cmd_type(enum):<1>:cmd=</usr/cluster/
lib/rgm/rt/hafoip/hafoip_monitor_start>:tag=<rg-ora.ha-host-1.7>: Calling security_clnt_connect(..., host=<node1>, sec_typ
e {0:WEAK, 1:STRONG, 2:DES} =<1>, ...)
Oct 17 05:19:25 node1 Cluster.RGM.rgmd: [ID 751138 daemon.notice] 47 fe_rpc_command: cmd_type(enum):<1>:cmd=</usr/cluster/
lib/rgm/rt/hastorageplus/hastorageplus_start>:tag=<rg-ora.rs-ora-has.0>: Calling security_clnt_connect(..., host=<node1>,
sec_type {0:WEAK, 1:STRONG, 2:DES} =<1>, ...)
Oct 17 05:19:25 node1 Cluster.RGM.rgmd: [ID 515159 daemon.notice] method <hafoip_monitor_start> completed successfully for
resource <ha-host-1>, resource group <rg-ora>, node <node1>, time used: 0% of timeout <300 seconds>
Oct 17 05:19:25 node1 Cluster.RGM.rgmd: [ID 515159 daemon.notice] method <hastorageplus_start> completed successfully for
resource <rs-ora-has>, resource group <rg-ora>, node <node1>, time used: 0% of timeout <90 seconds>
Oct 17 05:19:25 node1 Cluster.RGM.rgmd: [ID 224900 daemon.notice] launching method <hastorageplus_monitor_start> for resou
rce <rs-ora-has>, resource group <rg-ora>, node <node1>, timeout <90> seconds
Oct 17 05:19:25 node1 Cluster.RGM.rgmd: [ID 751138 daemon.notice] 47 fe_rpc_command: cmd_type(enum):<1>:cmd=</usr/cluster/
lib/rgm/rt/hastorageplus/hastorageplus_monitor_start>:tag=<rg-ora.rs-ora-has.7>: Calling security_clnt_connect(..., host=<tes
tlab5>, sec_type {0:WEAK, 1:STRONG, 2:DES} =<1>, ...)
Oct 17 05:19:25 node1 Cluster.RGM.rgmd: [ID 515159 daemon.notice] method <hastorageplus_monitor_start> completed successfu
lly for resource <rs-ora-has>, resource group <rg-ora>, node <node1>, time used: 0% of timeout <90 seconds>
Oct 17 05:19:38 node1 Cluster.RGM.rgmd: [ID 224900 daemon.notice] launching method <bin/oracle_server_validate> for resour
ce <rs-ora>, resource group <rg-ora>, node <node1>, timeout <120> seconds

Oct 17 05:19:38 node1 Cluster.RGM.rgmd: [ID 375444 daemon.notice] 8 fe_rpc_command: cmd_type(enum):<1>:cmd=</opt/SUNWscor/
oracle_server/bin/oracle_server_validate>:tag=<rg-ora.rs-ora.2>: Calling security_clnt_connect(..., host=<node1>, sec_type
{0:WEAK, 1:STRONG, 2:DES} =<1>, ...)
Oct 17 05:19:38 node1 Cluster.RGM.rgmd: [ID 515159 daemon.notice] method <bin/oracle_server_validate> completed successful
ly for resource <rs-ora>, resource group <rg-ora>, node <node1>, time used: 0% of timeout <120 seconds>
Oct 17 05:19:38 node1 Cluster.RGM.rgmd: [ID 224900 daemon.notice] launching method <bin/oracle_server_init> for resource <
rs-ora>, resource group <rg-ora>, node <node1>, timeout <30> seconds
Oct 17 05:19:38 node1 Cluster.RGM.rgmd: [ID 751138 daemon.notice] 47 fe_rpc_command: cmd_type(enum):<1>:cmd=</opt/SUNWscor
/oracle_server/bin/oracle_server_init>:tag=<rg-ora.rs-ora.4>: Calling security_clnt_connect(..., host=<node1>, sec_type {0
:WEAK, 1:STRONG, 2:DES} =<1>, ...)
Oct 17 05:19:38 node1 Cluster.RGM.rgmd: [ID 515159 daemon.notice] method <bin/oracle_server_init> completed successfully f
or resource <rs-ora>, resource group <rg-ora>, node <node1>, time used: 0% of timeout <30 seconds>
Oct 17 05:19:38 node1 Cluster.CCR: [ID 973933 daemon.notice] resource rs-ora added.
Oct 17 05:19:39 node1 Cluster.RGM.rgmd: [ID 224900 daemon.notice] launching method <bin/oracle_server_start> for resource
<rs-ora>, resource group <rg-ora>, node <node1>, timeout <600> seconds
Oct 17 05:19:39 node1 Cluster.RGM.rgmd: [ID 751138 daemon.notice] 47 fe_rpc_command: cmd_type(enum):<1>:cmd=</opt/SUNWscor
/oracle_server/bin/oracle_server_start>:tag=<rg-ora.rs-ora.0>: Calling security_clnt_connect(..., host=<node1>, sec_type {
0:WEAK, 1:STRONG, 2:DES} =<1>, ...)
Oct 17 05:19:48 node1 SC[SUNWscor.oracle_server.start]:rg-ora:rs-ora: [ID 876834 daemon.error] Could not start server
Oct 17 05:19:48 node1 Cluster.RGM.rgmd: [ID 938318 daemon.error] Method <bin/oracle_server_start> failed on resource <rs-o
ra> in resource group <rg-ora> [exit code <1>, time used: 1% of timeout <600 seconds>]
Node2# more /var/adm/messages
Oct 14 20:20:04 node2 Cluster.RGM.rgmd: [ID 529407 daemon.notice] resource group rg-ora state on node node2 change to RG_PENDIN
G_OFFLINE
Oct 14 20:20:04 node2 Cluster.RGM.rgmd: [ID 443746 daemon.notice] resource rs-ora-has state on node node2 change to R_MON_STOPP
ING
Oct 14 20:20:04 node2 Cluster.RGM.rgmd: [ID 443746 daemon.notice] resource ha-host-1 state on node node2 change to R_MON_STOPPI
NG
Oct 14 20:20:04 node2 Cluster.RGM.rgmd: [ID 224900 daemon.notice] launching method <hafoip_monitor_stop> for resource <ha-host
-1>, resource group <rg-ora>, node <node2>, timeout <300> seconds
Oct 14 20:20:04 node2 Cluster.RGM.rgmd: [ID 224900 daemon.notice] launching method <hastorageplus_monitor_stop> for resource <
rs-ora-has>, resource group <rg-ora>, node <node2>, timeout <90> seconds
Oct 14 20:20:04 node2 Cluster.RGM.rgmd: [ID 268902 daemon.notice] 45 fe_rpc_command: cmd_type(enum):<1>:cmd=</usr/cluster/lib/
rgm/rt/hafoip/hafoip_monitor_stop>:tag=<rg-ora.ha-host-1.8>: Calling security_clnt_connect(..., host=<node2>, sec_type {0:WEAK
, 1:STRONG, 2:DES} =<1>, ...)
Oct 14 20:20:04 node2 Cluster.RGM.rgmd: [ID 510020 daemon.notice] 46 fe_rpc_command: cmd_type(enum):<1>:cmd=</usr/cluster/lib/
rgm/rt/hastorageplus/hastorageplus_monitor_stop>:tag=<rg-ora.rs-ora-has.8>: Calling security_clnt_connect(..., host=<node2>, s
ec_type {0:WEAK, 1:STRONG, 2:DES} =<1>, ...)
Oct 14 20:20:05 node2 Cluster.RGM.rgmd: [ID 515159 daemon.notice] method <hastorageplus_monitor_stop> completed successfully f
or resource <rs-ora-has>, resource group <rg-ora>, node <node2>, time used: 0% of timeout <90 seconds>
Oct 14 20:20:05 node2 Cluster.RGM.rgmd: [ID 443746 daemon.notice] resource rs-ora-has state on node node2 change to R_ONLINE_UN
MON
Oct 14 20:20:05 node2 Cluster.RGM.rgmd: [ID 443746 daemon.notice] resource rs-ora-has state on node node2 change to R_STOPPING
Oct 14 20:20:05 node2 Cluster.RGM.rgmd: [ID 784560 daemon.notice] resource rs-ora-has status on node node2 change to R_FM_UNKNO
WN
Oct 14 20:20:05 node2 Cluster.RGM.rgmd: [ID 922363 daemon.notice] resource rs-ora-has status msg on node node2 change to <Stopp
ing>
Oct 14 20:20:05 node2 Cluster.RGM.rgmd: [ID 224900 daemon.notice] launching method <hastorageplus_stop> for resource <rs-ora-h
as>, resource group <rg-ora>, node <node2>, timeout <1800> seconds
Oct 14 20:20:05 node2 Cluster.RGM.rgmd: [ID 510020 daemon.notice] 46 fe_rpc_command: cmd_type(enum):<1>:cmd=</usr/cluster/lib/
rgm/rt/hastorageplus/hastorageplus_stop>:tag=<rg-ora.rs-ora-has.1>: Calling security_clnt_connect(..., host=<node2>, sec_type
{0:WEAK, 1:STRONG, 2:DES} =<1>, ...)
Oct 14 20:20:05 node2 Cluster.RGM.rgmd: [ID 515159 daemon.notice] method <hafoip_monitor_stop> completed successfully for reso
urce <ha-host-1>, resource group <rg-ora>, node <node2>, time used: 0% of timeout <300 seconds>
Oct 14 20:20:05 node2 Cluster.RGM.rgmd: [ID 443746 daemon.notice] resource ha-host-1 state on node node2 change to R_ONLINE_UNM
ON
Oct 14 20:20:05 node2 Cluster.RGM.rgmd: [ID 515159 daemon.notice] method <hastorageplus_stop> completed successfully for resou
rce <rs-ora-has>, resource group <rg-ora>, node <node2>, time used: 0% of timeout <1800 seconds>
Oct 14 20:20:05 node2 Cluster.RGM.rgmd: [ID 443746 daemon.notice] resource rs-ora-has state on node node2 change to R_STOPPED
Oct 14 20:20:05 node2 Cluster.RGM.rgmd: [ID 443746 daemon.notice] resource ha-host-1 state on node node2 change to R_STOPPING
Oct 14 20:20:05 node2 Cluster.RGM.rgmd: [ID 224900 daemon.notice] launching method <hafoip_stop> for resource <ha-host-1>, res
ource group <rg-ora>, node <node2>, timeout <300> seconds
Oct 14 20:20:05 node2 Cluster.RGM.rgmd: [ID 784560 daemon.notice] resource ha-host-1 status on node node2 change to R_FM_UNKNOW
N
Oct 14 20:20:05 node2 Cluster.RGM.rgmd: [ID 922363 daemon.notice] resource ha-host-1 status msg on node node2 change to <Stoppi
ng>
Oct 14 20:20:05 node2 Cluster.RGM.rgmd: [ID 510020 daemon.notice] 46 fe_rpc_command: cmd_type(enum):<1>:cmd=</usr/cluster/lib/
rgm/rt/hafoip/hafoip_stop>:tag=<rg-ora.ha-host-1.1>: Calling security_clnt_connect(..., host=<node2>, sec_type {0:WEAK, 1:STRO
NG, 2:DES} =<1>, ...)
Oct 14 20:20:06 node2 ip: [ID 678092 kern.notice] TCP_IOC_ABORT_CONN: local = 192.168.032.244:0, remote = 000.000.000.000:0, s
tart = -2, end = 6
Oct 14 20:20:06 node2 ip: [ID 302654 kern.notice] TCP_IOC_ABORT_CONN: aborted 0 connection
Oct 14 20:20:06 node2 Cluster.RGM.rgmd: [ID 784560 daemon.notice] resource ha-host-1 status on node node2 change to R_FM_OFFLIN
E
Oct 14 20:20:06 node2 Cluster.RGM.rgmd: [ID 922363 daemon.notice] resource ha-host-1 status msg on node node2 change to <Logica
lHostname offline.>
Oct 14 20:20:06 node2 Cluster.RGM.rgmd: [ID 515159 daemon.notice] method <hafoip_stop> completed successfully for resource <ha
-host-1>, resource group <rg-ora>, node <node2>, time used: 0% of timeout <300 seconds>
Oct 14 20:20:06 node2 Cluster.RGM.rgmd: [ID 443746 daemon.notice] resource ha-host-1 state on node node2 change to R_OFFLINE
Oct 14 20:20:06 node2 Cluster.RGM.rgmd: [ID 443746 daemon.notice] resource rs-ora-has state on node node2 change to R_POSTNET_S
TOPPING

WD External disk Error: Filesystem verify or repair failed

Hi all
My Western Design external hard drive has started to run really slowly when accessing data as well as transferring. After plugging the usb to the mac it takes about 30 seconds to pick up the drive with a DISK ERROR message. I have been into disk utilities and tried verifying the disk and repairing with the following message coming up...
Verify and Repair volume “LEILA”
** /dev/disk1s1
** Phase 1 - Preparing FAT
** Phase 2 - Checking Directories
Unable to read directory (Input/output error)
Error: Filesystem verify or repair failed.
Details of the external follow:
Disk Description : WD Elements 1023 Media
Total Capacity : 465.8 GB (500,105,740,288 Bytes)
Connection Bus : USB
Write Status : Read/Write
Connection Type : External
Partition Map Scheme : Master Boot Record
Any help would be appreciated
Thanks

It sounds like your WD drive is failing. Download Smart Utility from http://www.volitans-software.com/smart_utility.php and see what it says about the health of the drive.
If you scan various discussion groups, you'll see issues with WD external drives, as the electronics can be problematic.

I have an alert message in disc utility. Error: storage system verify or repair failed. Problems were found with the partitian map which might prevent booting.

While running verify disc in disc utility on 251 GB SSD SM256c Media I came up with this message: Alert system verify or repair failed. In the descriptions box of history it said, problems were found with the partitions map which might prevent booting. This is followed by a message in red reading, Error: Storage system verify or repair failed. At the time I was down loading raw pictures off my camera through a card reader across my computer to a relatively new 2TB Western Digital portable hard drive. after about 13 to 15 pictures downloaded that drive faileded. My Mac Book Air works fine, but i get this message now everytime I run disc verify on this disc. The Macintosh HD checks out fine.

While running verify disc in disc utility on 251 GB SSD SM256c Media I came up with this message: Alert system verify or repair failed. In the descriptions box of history it said, problems were found with the partitions map which might prevent booting. This is followed by a message in red reading, Error: Storage system verify or repair failed. At the time I was down loading raw pictures off my camera through a card reader across my computer to a relatively new 2TB Western Digital portable hard drive. after about 13 to 15 pictures downloaded that drive faileded. My Mac Book Air works fine, but i get this message now everytime I run disc verify on this disc. The Macintosh HD checks out fine.

Windows could not start the FLEXnet Licensing Service service on Local Computer Error 1068: The dependency service or group failed to start.

Today I installed Adobe Director 11.5. I received a couple of errors in the FLEXnet Licensing Service. It looks It could not start. I tried to download the Licence fix what I found on Google but that doesn't work, so I checked the 'Service' at service (windows).
It's status is empty. When I double click on the FLEXnet Licensing Service, clicked on start at the opened window and an error is coming:
Windows could not start the FLEXnet Licensing Service service on Local Computer
Error 1068: The dependency service or group failed to start.
I don't understand what it says with this message, only that it is impossible to start. However, that is not what I am trying of course, I want to start the FLEXnet Licensing Service, service.
Re-installing of the software, doesn't make any change. How can I start it so Director is also working?

Hi Don1233,
Please consider seek help at the software vendor side.
For the services didn't start, follow the suggestions posted by Elton in the thread below:
https://social.technet.microsoft.com/Forums/en-US/e35da253-f0df-41d1-8df2-b73fa54742a0/windows-could-not-start-the-flexnet-licensing-service-service-on-local-computer-error-1068-the?forum=w7itproinstall
Best regards
Michael Shao
TechNet Community Support

Network: Unknown / The dependency service or group failed to start

Hello, MicroSoft tech crew. I know my issue is not something new to you, there are earlier posts with similar to identical problems to mine. For a whole day I tried everything I could find on the internet to fix my issue, but nothing seemed to work.
I cannot connect to the internet. My network and sharing center displays the following, instead of the map:
Unknown
The dependency service or group failed to start.
I am running windows 7 Professional 64-bit.
I used ESET NOD32 as antivirus. I uninstalled it the day this issue appeared.
I have no restore point.
Any other computer or device can successfully connect to my router.
Re-installing a fresh copy of windows is not an option.
These are the solutions I tried and didn't work:
I tried restarting the router (1 minute power-off)
I HAVE reinstalled my drivers for both LAN and WAN network cards at least twice each.
~ I ran the following commands in CMD as administrator over 3 times, successfully, followed by reboot:
* sfc /scannow
* netsh winsock reset // netsh winsock reset catalog
* netsh int ip reset // netsh int ip reset reset.log hit
I have checked the following in the registry:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\servicel\NlaSvc has always had full control and read permissions for both SYSTEM and Administrators.
I replaced my nlasvc.dll file from C:\Windows\System32\ with one from another computer (and set TrustedInstaller as its owner)
Booting in Safe mode with networking does not change this situation.
These are some of my services. Note that I turned some of those from Manual to Automatic.
1) COM+ Event System
* Automatic, Started
2) Computer browser
* Automatic, Started
3) DHCP Client
* Automatic, Stopped
* When I attempt to start this service I get this error message:
"Windows could not start the DHCP Client Service on Local Computer."
"Error 1186: Element not found."
* Dependencies:
3.1) Network Store Interface Service
* Automatic, Started
4) DNS Client
* Automatic, started
5) Network Connections
* Automatic, Started
6) Network Location Awareness
* Automatic, Stopped
* When I attempt to start this service I get this error message:
"Windows could not start the Network Location Awareness service on Local Computer."
"Error 1068: The dependency service or group failed to start"
* Dependencies:
6.1) Network Store Interface Service
* Automatic, Started
6.2) Remote Procedure Call (and all it depends on)
* Automatic, Started
7) Remote Procedure Call (RPC)
* As stated above: Automatic, Started
8) Server
* Automatic, Stopped
* When I attempt to start this service I get this error message:
"Windows could not start the Server service on Local Computer."
"Error 50: The request is not supported."
* Dependencies:
8.1) Security Accounts Manager (and the RPC)
* Automatic, Started
9) TCP/IP Netbios helper
* Automatic, Started
10) Wireless Zero Configuration (XP)
* Nonexistent
11) WLAN AutoConfig
* Automatic, Started
12) Workstation
* Automatic, Started
Also, my ipconfig /all looks very strange. I am not allowed to post pictures yet, but this is the image on skydrive server:
/#cid=2168FA597AC0EAF1&id=2168FA597AC0EAF1%21107

I follow your solution and found the
Network Location Awareness service
could not start.
Then I found the solution from:
http://mjmcfalls.wordpress.com/2012/04/07/network-location-awareness-service-terminated-with-service-specific-error-1073741288/
by running the commands:
net localgroup administrators localservice /add
net localgroup administrators networkservice /add
to add the "Localservice" user and "NetworkService" user
to the adminstrators group.
And the problem solved after reboot.

Unmounted External Hard Drive, Error: Filesystem verify or repair failed

Earlier today, I disconnected the external hard drive while it was working.
Now, the External Hard Drive won't even show up on my computer. However, on the Disk Utility it does. I have tried to verify & repair the disk. Plus click the mount button nothing work.
Whenever, I ran the system verify or the repair. I got this error: Error: Filesystem verify or repair failed
Ok. So I have searched all over the internet and forums. Tried everything. Nothing works.
I even tried Disk Warrior. It would work for a while, then when it came to step 8. It would make my computer go black and hold down the power button to restart.
Any suggestions? Please let me know, I would like to recover the files if I can. Thanks.
P.S.Yes I have tried to restart multiple time. I have tried with my USB 2.0, firewire 400, & 800 too.. Nothing.Everyone except the USB shows up in the disk utility but doesn't mount.

I have had the exact same situation occur, but was able to follow these steps to successfully save everything!!
The Unix program "dd" will instruct a drive to stream out all of it's data from beginning to end without regard to file structure, therefore creating an exact block-for-block duplicate. By doing this, it will allow you to copy everything off without having to mount the drive. It also ignores any corruption or physically damaged blocks on the drive which would otherwise crash or freeze the Finder. It saves the data to a disk image file which you can then open and use without fear of imminent failure (the format of the disk image will be the same as the original drive). Now that the data is preserved, you can safely go through and recover your files. Keep in mind that if a file was damaged or corrupted on the drive, it will be unusable, but at least you'll be able to get to the good ones safely. In my case, using "dd", I had no problems and got every file off. If it doesn't work for you, at least it's impossible for just trying it to further damage your files. I can recommend a few other remedies if this doesn't work for you.
Note: The computer must be able to at least recognize the drive. That means either 1) It mounts 2) When you connect the drive the Finder asks if you want to erase or ignore, click ignore and you should be able to do this, or 3) Nothing happens in the Finder, but the volume in question does appear in Disk Utility. If you connect the drive and absolutely nothing happens and it never shows up in Disk Utility, it won't work.
Note: As always, it is suggested that you backup important data on your startup disk before proceeding with stuff like this. It is possible to wipe a drive by mistyping a terminal command, so double check before you hit enter.
_Now, on with the show!_
Prep: Restart your machine so that it goes straight to the login window. Enter your user name and password. As soon as you press enter after your password, immediately hold down the shift key until the Finder finishes loading (this prevents any background startup items from running that might interfere).
1. Attach the drive to the computer and make sure you have another drive with enough free space to hold the entire capacity of the bad drive, not just it's used space, but the WHOLE size of the bad drive (for exception, see very bottom of this post).
2. In Terminal, type:
+diskutil list+
Look for the drive you want to recover in the "name" column, then write down it's "identifier" (ex. disk1s2)
3. In Terminal, type:
+dd bs=512 if=/dev/disk#s# of=/my_directory/image.dmg conv=noerror,sync+
!! Replace "disk#s#" with the identifier you wrote down before !!
!! Replace "/my_directory/" with the path to where you want to save !!
!! Replace "image.dmg" with the name you want to give the disk image (must end with .dmg) !!
4. To confirm that something is happening, open Activity Monitor (in the Utilities folder) and click "Disk Activity". Once you determine an average transfer rate, divide the size of the drive by that and then divide by 60 to see how many minutes it will take to finish. *+! ! FOR LARGE DRIVES THIS WILL TAKE A VERY LONG TIME ! !+* To be safe, do not use your computer for anything until the process finishes, you can leave Activity Monitor open so you can see when it's finished.
If you're only really concerned about a certain files and you know their exact path on the bad drive, let me know and I can give you modified instructions to copy just those files, saving the time and space of doing the whole drive.

Storage system verify or repair failed,cannot download system updates,in ColorSynk found 4 bad profiles, in ITunes I still see my old Apple ID. What I can to do ,please identify it for me.

I have changed my Apple ID and may be anything wrong did with Disk Utility.
So , I could not download system updates by normal way and downloaded them from Apple site via Folx and have them installed thus.
I have tried check out condition of Toshiba disk and got messages of errors.
What can I do in this situation?
In Disk Utility:
Storage system verify or repair failed.
Problems were found with the partition map which might prevent booting.
Problems were encountered during repair of partition map
S.M.A.R.T status verified
In ColorSynk Utility:
Searching for profiles...
Checking 64 profiles...
/Library/Application Support/Adobe/Color/Profiles/RedBlueYelllow.icc
   Tag 'pseq': Required tag is not present.
/Library/Application Support/Adobe/Color/Profiles/Smokey.icc
   Tag 'pseq': Required tag is not present.
/Library/Application Support/Adobe/Color/Prosystem ufiles/TealMagentaGold.icc
   Tag 'pseq': Required tag is not present.
/Library/Application Support/Adobe/Color/Profiles/TotalInkPreview.icc
   Tag 'pseq': Required tag is not present.
Verify done - found 4 bad profiles.
In ITunes :
I see my old email as Apple ID
I going to change Lion OS to Mountain Lion OS ,is there any troubles ahead because of problems described above? And how to fix all that ?
Thank you in advance.
Message was edited by: TatianaTia

PS
In Disk Utility all looks so:
Verifying partition map for “TOSHIBA MK5065GSXF Media”
Checking prerequisites
Checking the partition list
Checking for an EFI system partition
Checking the EFI system partition’s size
Checking the EFI system partition’s file system
Checking all HFS data partition loader spaces
Checking Core Storage Physical Volume partitions
Checking storage system
Problems were found with the partition map which might prevent booting
Error: Storage system verify or repair failed.Verifying and repairing partition map for “TOSHIBA MK5065GSXF Media”
Checking prerequisites
Checking the partition list
Checking for an EFI system partition
Checking the EFI system partition’s size
Checking the EFI system partition’s file system
Checking all HFS data partition loader spaces
Reviewing boot support loaders
Checking Core Storage Physical Volume partitions
Checking storage system
Problems were encountered during repair of the partition map
Error: Storage system verify or repair failed.
I will be greatly appreciated for any considerations or advise (*.*)

2011 macbook pro OSX maverick, error: storage system verify or repair failed

Hi there,
My 2011 Macbook pro which came with Lion but now upgraded to Maverick 10.9.5 has just crashed. It will start up in recovery mode but when I've gone to the apple logo to start up from disk, it shows the disk but doesn't start up from it I just get a grey screen.
I'ved tried to verify and repair the disk and get message: 'The partition map needs to be repaired because there's a problem with the EFI system partitions file system'
I also get: error, storage system verify or repair failed.
S.M.A.R.T staus is verified
None of the key commands for start up seem to work, ie - option - shift - command P,R etc.
I can't re-install operating system as it is an older version, ie Lion and have updated to Maverick via APP store so no way of re-installing OSX.
Any ideas???

I have the same issue. Not able to fix it.

Error: Storage system verify or repair failed

My MBP frooze a couple times yesterday; I loaded Disk Utillity and with the top level "122.33 GB APPLE SSD" selected I tried both "Verify Disk" and "Repair Disk." I get a pop up that says, "Alert: Storage system verify or repair failed." On the detailed section it states: "Problems were found with the parition map which might prevent booting. (In red letters) Error: Storage system verify or repair failed." When I select "Macintosh HD," I encounter no problems with Repairs or Verify Disks/Disk Permissions. I have always been able to select both and do the Verify/Repair options and haven't had any errors. I am running Lion and do have encrytption enabled. When I boot in recovery mode, I am able to Verify and Repair Disks on the "122.33 GB APPLE SSD" level without any problems. Only when I boot normally and attempt to Verify or Repair the top level. I am thinking its an encryption related error and not actually an issue. Any thoughts?

My sert up looks simple in 10.6 and 10.7 disk utility             500GB Physical HD
                                 slightly to the right virtual volume partition (icon)1 Mountain Lion
                                                                                                        2 Lion
                                                                                                        3 Snowleopard
                                                                                                        4 empty
In Lion Disk Utiity on First Aid if I choose 500HD and repair disk In red it states alert storage system verify or repair failed disk permissions are greyed out that means they can not be clicked.
If I choose Mountain lion (I am booted in Lion) it will repair permissions and veryfy and repair disk.
If I choose Lion (I am booted in Lion) it will verify and repair permissions but only verify disk. NOT repair !
( it is said it can not repair itself so we need to be booted into lion recovery disk disk utilities)
If I choose Snow leopard (I am booted in Lion) it will verify and repair permissions and verify and repair disk.
In Mountain lion the partition map or set up is strange.
                                                                             500GB Physical HD
                        slightly to the left virtual volume partition (icon) 1 Lion
                            slightly to the right virtual volume partition (icon) 2 Lion
                        slightly to the right virtual volume partition (icon) mountain Lion
                       slightly to the left virtual volume partition (icon) mountain Lion
                                                                                           3 Snowleopard
                                                                                           4 empty
Do I have 6 partitions 2 Lions 2 Mountain lions?
And on Mountain lion and lion on sub volume only FirstAid and Partition is shown not erase or restore !
In Snow leopard disk utility Mountain lion and lion shows as incompatable so can even partitioned or repaired.
When partitioning and installing 3 OSX's on 1 HD the partition table changes with Mountain lion and Lion.
And if you have Vile fault turned on you can not access the Mountain lion and lion repair permissions and repair disk ,also can not access the recovery disk when booting using options.
That means you have to turn Vilefault or Gate keeper off.
Apple Japan said it does not support more than one OS per HD !
It is a resl mess they do not fix these things and show photes and explanations of different scenrios on disk utility.
we want to use all our OSX/s on the same machine because many applications do not work on different platforms.
They should work out a solution when bring out new OS

In the process of installing OS X Maverick on mac mini; got error "Filesystem verify or Repair failed"

Hi,
I am in the process of installing Maverick on my Mac Mini. I got an error: "Filesystem verify or Repair failed".
Most threads suggest that I either:
1. restart process,
2. install disk and try again,
3. recover disk
Since I am in the middle of installing, I cannot seem to go back to my working OS to restart the process. Since Maverick is available in the App Store, i cannot use a disk for it. That leaves me with recovering the disk. Can anyone suggest how I can do this without destroying all my files on the computer?
Thanks,

Thanks for your advice.
I do have a backup, but I can't access it right now. I tried the OS X Recovery, but when I try the "Command-R" option, it just goes right back into the install. I have used the "Command-R" option before, so I know when and how long to hold it for. I just couldn't get it to not enter the install. I did manage to at one point get a prompt where it asked me if I wanted to install from Macintosh HD (main partition) or Backup (secondary partition), but I chose Macintosh HD, and it went back into the install. I couldn't get that option again for whatever reason.
Is there a way I can just start from scratch? Both Snow Leopard and Mavericks are online only. Is there a way to pause the install, connect to the internet and install a brand new (wipe out all files - I can always use by backup to restore my important files later) copy of the OS?
Thanks,

Oracle clsomon failed with fatal status 13.

How can we know, What's going on about this error ?
we have used oracle RAC 10G on Redhat 4
May 4 08:50:29 aadb01 logger: Oracle clsomon failed with fatal status 13.
May 4 08:50:30 aadb01 su(pam_unix)[31051]: session opened for user oracle by (uid=0)
May 4 08:50:30 aadb01 logger: Oracle CRS failure. Rebooting for cluster integrity.

How can we know, What's going on about this error ?
we have used oracle RAC 10G on Redhat 4
May 4 08:50:29 aadb01 logger: Oracle clsomon failed with fatal status 13.
May 4 08:50:30 aadb01 su(pam_unix)[31051]: session opened for user oracle by (uid=0)
May 4 08:50:30 aadb01 logger: Oracle CRS failure. Rebooting for cluster integrity.

How to implement the Oracle Group by function in Crystal reports?

Hi all,
In SQL, for example we have a group function like:
select district,state, country, continent, sum(no.of people) from world.
Now, How to implement this group function in crystal reports? Please advise.
Thanks in advance..
Regards,
sriram

Hi Vinay,
Thanks for the prompt reply.
In one of our report, we are supposed to perform group by for 14 columns to get sum of 3 columns and there by displaying 17 columns in the report.
When we tried in crystal reports to implement this oracle group by functionality:
1. We created 14 groups from the Insert->Group option.
2. By performing this, we got 14 group sections vertically(one inside the other).
3. Then we created the sum(15th column),sum(16th column), sum(17th column) by Insert->Summary option.
4. We suppresed all the group sections except for the last group.
5. Then, dragged all the groups to the last group section along with the summary fields.
This is how, we tried to acheive the oracle group by function in Crystal reports.
Please advise, whether our approach is right. If not, please suggest the appropriate approach with a bit detailed explanation.
Thanks,
Sriram.

Bea weblogic 6.1 does not oracle Database fail over

Hi We had Concurrency Strategy:excusive . Now we change that to Database for performace
reasons. Since we change that now when we do oracle database fail over weblogic
6.1 does not detect database fail over and it need restart.
how we can resolve this ??

mt wrote:
Hi We had Concurrency Strategy:excusive . Now we change that to Database for performace
reasons. Since we change that now when we do oracle database fail over weblogic
6.1 does not detect database fail over and it need restart.
how we can resolve this ??Are your pools set to test connections at reserve time?
Joe

OFS Verified Oracle group failed

Similar Messages

Maybe you are looking for