OFTP_TCP Receiver Adapter locking issue /stopped working

Hello,
OFTP Receiver adapter stopped processing of GOTYPE commands which are used to extract available EDI files from mailbox.All command messages are in 'To Be Delivered' status. As there are no commands reached to mail box all EDI files remians unextracted.We had restart of java stack, after that command msgs processed by OFTP adapter and EDI files get processed into SAP.
What I understood, OFTP adapter might locked / oftp processors stopped working.
In this case are there any other ways to bring back OFTP adapter into normal functionolity instead of 'Restart of Java Stack'.
Thanks
Veera

Hi,
I hope someone can share your thoughts who worked on OFTP adapter.
Cheers
Veera

Similar Messages

My iPhone5 lock screen stops working sometimes

My iPhone5 lock screen stops working sometimes.I have to restart the phone every time I encounter this problem. Sometime even when phone is locked and there's incoming call I couldn't answer simply because the touch stops working. This frequency of occurrence is increasing now.
Is this some kind of software issue because I noticed this after updating to 7.0.2 iOS ?

Because something is wrong with your iphone.
Try the basics from the manual: restart, reset, restore.
If these fail, it is likely a hardware issue. Make an appointment at the genius bar.

HT201210 I have 4s facing hang problem after updating when i dicline the call the keypad geting locked ,touch stop working unable to unlock the phone .then what i can do i restart the phone with pressing home key & power key together then i am able to ace

I have 4s with 16GB storage capacity using IOS 7.1.2.
Facing hang problem after updating when i decline the call the keypad getting locked ,touch stop working unable to unlock the phone .
Then what i can do i restart the phone with pressing home key & power key together then i am able to access it.
Kindly resolve the issue as soon as possible
Ashish
[email protected]

Did you already try to set it up as a new device, as explained in this article?
iOS: How to back up your data and set up your device as a new device

My iphone 4 wont turn on after hours of charging, normally i would press the lock button and home button together but my lock button stopped working afue weeks ago. Help!

My iphone 4 wont turn on after hours of charging, normally i would press the lock button and home button together but my lock button stopped working afue weeks ago. Help!

Hello Kimbo1991,
It sounds like your phone is not successfully booting even though you have reset the device. I would next recommend attempting a backup and restore to iTunes with this article:
iOS: Back up and restore your iOS device with iCloud or iTunes
http://support.apple.com/kb/ht1766
If you are unable to restore with iTunes I would next put the device into recovery mode, and attempt the restore again:
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Thank you for using Apple Support Communities.
Regards,
Sterling

I have an iphone4 that I've had since April, but recently the lock button stopped working, help please??

I've had an iphone4 since April and recently the lock button stopped working, I was wondering since I hadn't had it for a year if it could get fixed for free

ONly way to find out is to go to your nearest Apple store and talk to the people at the genius bar.

I have received the "licensing has stopped working" Error code 150:30. I have done all 8 suggested fixes and have had no luck fixing this mess. Anyone able to help.

I have received the "licensing has stopped working" Error code 150:30. I have done all 8 suggested fixes and have had no luck fixing this mess. Anyone able to help.

Great!
Now in Terminal at the $ prompt type sudo python <leave a space after that> Do not press enter or return yet.
Drag and drop "license recover.py" into the Terminal window, then press enter or return.
You should see this result: Confirm that you do.

What happens when your lock button stops working?

what happens when your lock button stops working?

The world end.
Seriously, nothing "happens".
are you asking how to fix it? If so, why don't you just ask?

Mail will not send or receive. It intermittently stops working. Why?

Mail will not send or receive. It intermittently stops working. Why?

I had problems with sending emails from one server in particular, however, I would ask if you have gone to the page of your server and found specific instructions for configuring your mail. My iMAC would not send out emails, so I went to my (Italian) server's page and solved the problem.
It was not sufficient to let the MAC wizard connect you up with your server, and, indeed, MAIL invited me to consider installing the server's email manually. So doing, my problem was solved.
Your server's page should have a list of email programs (cf Outlook, Thunderbird, etc.) , with instructions as to how to configure them. Look for the item referring to Macintosh Mail, keep it in background in order to go back to it as you configure your mail.
My problem was that I could not convince Mail to accept the out connection, but when I eliminated my server entirely in Mail's Preferences, I added that server once again: Mail told me that it could not safely transfer my password and asked me if I wanted to set up the site manually. I clicked on manual, and found very precise specifications as to the number of the port to be used, then instructions on how to find the menu for the out mail, with a particular number I had to insert in the drop-down menu they specified.
It was not as complicated as it sounds here, but requires patience.

Lock button stopped working,is it warranty case?in Apple will change my iPhone or will be repaired? Sorry for my English

lock button stopped working,is it warranty case?in Apple will change my iPhone or will be repaired? Sorry for my English

Nobody here can possible speak for Apple whether it is a warranty failure or not. You need to take it into an Apple store or send it to Apple and have them evaluate it. If they decide it is a warranty failure and you are still within your warranty period, then yes, it will be replaced with a factory refurbished unit for free.
If it is determined to be due to something you have done, then the warranty does not apply and you would have to pay the out of warranty replacement fee.

IPhone 4 home and lock button stopped working

I have an iPhone 4 and my home and lock button stopped working today randomly at the same time. I have had assistive touch set up for a while but that also won't work. Is there anything I can do to fix this?

I only got it Febuary/March this year.

Volume and Lock buttons stopped working after new iOS 4.3.3 update (ipod 4th gen)

After I updated my ipod with the iOS 4.3, the volume and lock buttons stopped working.
This has happened before and it'sprobably one of the most annoying problems ever.
The lock button tends to stop working but then works again only when it wants to, but the volume buttons dont work at all.
When the locked button worked again I turned it off and turned it on again, but it didnt fix the problem.
I've pretty much tried everything that I've read and nothing seems to work.
So now, I don't know what to do.
Should I take it to a random apple store or to where I bought it from?
It seems that it's happening to almost everyone, so at least I'm not the only one and maybe someone can help me out

If you have restored in iTunes on a computer and the problem remains then it's a hardware fault and it needs to be repaired. When you update the iOS version on an iOS device it checks the hardware components, this is when it'll detect un-diagnosed hardware faults and the components will stop working... even if they were working previously

RFC Adapter - Locking Issue

Hi,
Our SAP production environment was down for two days. While it was down the login used by one of my RFC Receiver Adapters was locked. This meant the adapter could not run. Fair enough.
When the Production environment was brought back up the login used by the RFC Receiver Adapter was unlocked. However, I continued to get an error in Runtime Workbench claiming that the login was locked.
Checked with the security team and they confirmed the user wasn't locked.
Just to try something I went into the RFC adapter in question and simply retyped the login/pwd, saved the adapter and activated it. This seemed to clear the problem and it's now running as expected !!
Question is why did this work ? The adapter was saying the login was locked. It wasn't. All I did was effectively resubmit an updated version of the adapter and it worked again, even though no part of the adapter had actually changed. Is this some sort of caching issue ? Any thoughts ?
Cheers,
PaulC.

User was unlocked yesterday and was still giving locked error this morning. It's now working. Just surprised that a new call of an adapter would continue to say locked when it wasn't. Can only think it's some for of caching but this is a pretty unsatisfactory answer. Makes me worry that it might happen again.

Caps Lock LED stopped working

Hi,
As of this morning my caps lock button's LED, on my 13" Late 2013 Macbook Pro stopped working. The button still works I can still turn Caps lock on and off. I hope it's not a hardware issue. Has anyone encountered this problem?
Thanks

Paul_31 wrote:
I don't know whether any of these were long-term fixes.
All of the fixes suggested can work with the SMC reset seeming to be the easiest certain correction. I have noticed this is happening less often than a half-year ago so it would lead me to believe that something has improved in the system.

Why do I continue to receive an iTunes has Stopped Working error after finally updating to 11.1.4?

Like many here it seems, in updating iTunes to 11.1.4 I received the Error 7 (windows error 126) error, as well as the MSVCR80.DLL is missing error. With help from this site, I managed to fully uninstall iTunes and then reinstall 11.1.4. The iTunes program will now open, but within 1-2 seconds it will crash with the error message "iTunes has stopped working - A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available." This error happens every time the program is opened. I am using a 64-bit version of Windows 7. Does anyone know why this is happening and how I can resolve it? I sure would love to be able to use my iTunes library again!

did u fix it yet?
if u did can u help me cuz i havent use my itunes in like 3 days and its driving me crazy

I was using my iPhone 5 and the screen randomly went black. I can still hear incoming calls but the screen stays black and unresponsive and stays black. My lock button stopped working last week so I can't restart the phone. What can I do to solve this?

I had an appointment this morning with Apple to try and solve the problem with my lock button ranomly not working anymore and a few hours before my appointment with the Apple store i was using my phone and my screen randomly went black and stopped working. And the p.roblem now i cant use it. I tried restarting the phone but I can't restart it due to my lock button not working so i need help with a solution on what i can do. I missed my appointment today because i could no longer use my phone and i'm now stuck using my laptop. I did also try connecting it to my MacBook but the screen was still unresponsive and black. I rescheduled my appointment to Monday to see what is wrong with my button and screen but in the meanwhile i would like to know if there is anything i can do or if i would just have to wait until monday and take it in to Apple. Any help would be really appreciated as i am phonelss for now until i take it in to Apple in a few days. Thanks.

You wrote...
' What can I do to solve this'
What have you tried...?
The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup... Restore as New...

OFTP_TCP Receiver Adapter locking issue /stopped working

Similar Messages

Maybe you are looking for