OGG- Initial load

hi Experts,
Can you please provide the step or any document to do the initial load with RMAN?
also please provide the syntax for how to take the RMAN backup with particular scn number ? like in exp/imp we can use flashback_scn , is there any same parameter available in RMAN?
Thanks.

Please refer to the doc in the support note:
Oracle GoldenGate Best Practices: Instantiation from an Oracle Source Database [ID 1276058.1]

Similar Messages

Initial load failing between identical tables. DEFGEN skewed and fixable?

Initial load failing between identical tables. DEFGEN skewed and fixable?
Error seen:
2013-01-28 15:23:46 WARNING OGG-00869 [SQL error 0 (0x0)][HP][ODBC/MX Driver] DATETIME FIELD OVERFLOW. Incorrect Format or Data. Row: 1 Column: 11.
Then compared the discard record against a select * on the key column.
Mapping problem with insert record (target format)...
**** Comparing Discard contents to Select * display
ABCHID = 3431100001357760616974974003012 = 3431100001357760616974974003012
*!!! ABCHSTEPCD = 909129785 <> 9 ???*
ABCHCREATEDDATE = 2013-01-09 13:43:36 = 2013-01-09 13:43:36
ABCHMODIFIEDDATE = 2013-01-09 13:43:36 =2013-01-09 13:43:36
ABCHNRTPUSHED = 0 = 0
ABCHPRISMRESULTISEVALUATED = 0 = 0
SABCHPSEUDOTERM = 005340 = 005340
ABCHTERMID = TERM05 = TERM05
ABCHTXNSEQNUM = 300911112224 = 300911112224
ABCHTIMERQSTRECVFROMACQR = 1357799914310 = 1357799914310
*!!! ABCTHDATE = 1357-61-24 00:43:34 <> 2013-01-09 13:43:34*
ABCHABCDATETIME = 2013-01-09 13:43:34.310000 = 2013-01-09 13:43:34.310000
ABCHACCOUNTABCBER =123ABC = 123ABC
ABCHMESSAGETYPECODE = 1210 = 1210
ABCHPROCCDETRANTYPE = 00 = 00
ABCHPROCCDEFROMACCT = 00 = 00
ABCHPROCCDETOACCT = 00 = 00
ABCHRESPONSECODE = 00 = 00
…. <snipped>
Defgen comes out same when run against either table.
Also have copied over and tried both outputs from DEFGEN.
+- Defgen version 2.0, Encoding ISO-8859-1
* Definitions created/modified 2013-01-28 15:00
* Field descriptions for each column entry:
* 1 Name
* 2 Data Type
* 3 External Length
* 4 Fetch Offset
* 5 Scale
* 6 Level
* 7 Null
* 8 Bump if Odd
* 9 Internal Length
* 10 Binary Length
* 11 Table Length
* 12 Most Significant DT
* 13 Least Significant DT
* 14 High Precision
* 15 Low Precision
* 16 Elementary Item
* 17 Occurs
* 18 Key Column
* 19 Sub Data Type
Database type: SQLMX
Character set ID: ISO-8859-1
National character set ID: UTF-16
Locale: en_EN_US
Case sensitivity: 14 14 14 14 14 14 14 14 14 14 14 14 11 14 14 14
Definition for table RT.ABC
Record length: 1311
Syskey: 0
Columns: 106
ABCHID 64 34 0 0 0 0 0 34 34 34 0 0 32 32 1 0 1 3
ABCHSTEPCD 132 4 39 0 0 0 0 4 4 4 0 0 0 0 1 0 0 0
ABCHCREATEDDATE 192 19 46 0 0 0 0 19 19 19 0 5 0 0 1 0 0 0
ABCHMODIFIEDDATE 192 19 68 0 0 0 0 19 19 19 0 5 0 0 1 0 0 0
ABCHNRTPUSHED 130 2 90 0 0 0 0 2 2 2 0 0 0 0 1 0 0 0
ABCHPRISMRESULTISEVALUATED 130 2 95 0 0 0 0 2 2 2 0 0 0 0 1 0 0 0
ABCHPSEUDOTERM 0 8 100 0 0 0 0 8 8 8 0 0 0 0 1 0 0 0
ABCTERMID 0 16 111 0 0 0 0 16 16 16 0 0 0 0 1 0 0 0
ABCHTXNSEQNUM 0 12 130 0 0 0 0 12 12 12 0 0 0 0 1 0 0 0
ABCHTIMERQSTRECVFROMACQR 64 24 145 0 0 0 0 24 24 24 0 0 22 22 1 0 0 3
ABCTHDATE 192 19 174 0 0 0 0 19 19 19 0 5 0 0 1 0 0 0
ABCHABCDATETIME 192 26 196 0 0 1 0 26 26 26 0 6 0 0 1 0 0 0
ABCHACCOUNTABCER 0 19 225 0 0 1 0 19 19 19 0 0 0 0 1 0 0 0
ABCHMESSAGETYPECODE 0 4 247 0 0 1 0 4 4 4 0 0 0 0 1 0 0 0
ABCHPROCCDETRANTYPE 0 2 254 0 0 1 0 2 2 2 0 0 0 0 1 0 0 0
ABCHPROCCDEFROMACCT 0 2 259 0 0 1 0 2 2 2 0 0 0 0 1 0 0 0
ABCHPROCCDETOACCT 0 2 264 0 0 1 0 2 2 2 0 0 0 0 1 0 0 0
ABCHRESPONSECODE 0 5 269 0 0 1 0 5 5 5 0 0 0 0 1 0 0 0
… <snipped>
The physical table shows a PACKED REC 1078
And table invoke is:
-- Definition of table ABC3.RT.ABC
-- Definition current Mon Jan 28 18:20:02 2013
ABCHID NUMERIC(32, 0) NO DEFAULT HEADING '' NOT
NULL NOT DROPPABLE
, ABCHSTEPCD INT NO DEFAULT HEADING '' NOT NULL NOT
DROPPABLE
, ABCHCREATEDDATE TIMESTAMP(0) NO DEFAULT HEADING '' NOT
NULL NOT DROPPABLE
, ABCHMODIFIEDDATE TIMESTAMP(0) NO DEFAULT HEADING '' NOT
NULL NOT DROPPABLE
, ABCHNRTPUSHED SMALLINT DEFAULT 0 HEADING '' NOT NULL NOT
DROPPABLE
, ABCHPRISMRESULTISEVALUATED SMALLINT DEFAULT 0 HEADING '' NOT NULL NOT
DROPPABLE
, ABCHPSEUDOTERM CHAR(8) CHARACTER SET ISO88591 COLLATE
DEFAULT NO DEFAULT HEADING '' NOT NULL NOT DROPPABLE
, ABCHTERMID CHAR(16) CHARACTER SET ISO88591 COLLATE
DEFAULT NO DEFAULT HEADING '' NOT NULL NOT DROPPABLE
, ABCHTXNSEQNUM CHAR(12) CHARACTER SET ISO88591 COLLATE
DEFAULT NO DEFAULT HEADING '' NOT NULL NOT DROPPABLE
, ABCHTIMERQSTRECVFROMACQR NUMERIC(22, 0) NO DEFAULT HEADING '' NOT
NULL NOT DROPPABLE
, ABCTHDATE TIMESTAMP(0) NO DEFAULT HEADING '' NOT
NULL NOT DROPPABLE
, ABCHABCDATETIME TIMESTAMP(6) DEFAULT NULL HEADING ''
, ABCHACCOUNTNABCBER CHAR(19) CHARACTER SET ISO88591 COLLATE
DEFAULT DEFAULT NULL HEADING ''
, ABCHMESSAGETYPECODE CHAR(4) CHARACTER SET ISO88591 COLLATE
DEFAULT DEFAULT NULL HEADING ''
, ABCHPROCCDETRANTYPE CHAR(2) CHARACTER SET ISO88591 COLLATE
DEFAULT DEFAULT NULL HEADING ''
, ABCHPROCCDEFROMACCT CHAR(2) CHARACTER SET ISO88591 COLLATE
DEFAULT DEFAULT NULL HEADING ''
, ABCHPROCCDETOACCT CHAR(2) CHARACTER SET ISO88591 COLLATE
DEFAULT DEFAULT NULL HEADING ''
, ABCHRESPONSECODE CHAR(5) CHARACTER SET ISO88591 COLLATE
DEFAULT DEFAULT NULL HEADING ''
…. Snipped
I suspect that the fields having subtype 3 just before the garbled columns is a clue, but not sure what to replace with or adjust.
Any and all help mighty appreciated.

Worthwhile suggestion, just having difficulty applying.
I will tinker with it more. But still open to more suggestions.
=-=-=-=-
Oracle GoldenGate Delivery for SQL/MX
Version 11.2.1.0.1 14305084
NonStop H06 on Jul 11 2012 14:11:30
Copyright (C) 1995, 2012, Oracle and/or its affiliates. All rights reserved.
Starting at 2013-01-31 15:19:35
Operating System Version:
NONSTOP_KERNEL
Version 12, Release J06
Node: abc3
Machine: NSE-AB
Process id: 67895711
Description:
** Running with the following parameters **
2013-01-31 15:19:40 INFO OGG-03035 Operating system character set identified as ISO-8859-1. Locale: en_US_POSIX, LC_ALL:.
Comment
Comment
REPLICAT lodrepx
ASSUMETARGETDEFS
Source Context :
SourceModule : [er.init]
SourceID : [home/ecloud/sqlmx_mlr14305084/src/app/er/init.cpp]
SourceFunction : [get_infile_params]
SourceLine : [2418]
2013-01-31 15:19:40 ERROR OGG-00184 ASSUMETARGETDEFS is not supported for SQL/MX ODBC replicat.
2013-01-31 15:19:45 ERROR OGG-01668 PROCESS ABENDING.

Initial load with LOBs

Hi, i'm trying to do an inital load and I keep getting errors like these:
ERROR OGG-01192 Oracle GoldenGate Capture for Oracle, ext1.prm: Trying to use RMTTASK on data types which may be written as LOB chunks (Table: 'TESTDB.BLOBTABLE').
ERROR OGG-01668 Oracle GoldenGate Capture for Oracle, ext1.prm: PROCESS ABENDING.
The table looks like this:
COLUMN_NAME|DATA_TYPE|NULLABLE|DATA_DEFAULT|COLUMN_ID|COMMENTS
UUID     VARCHAR2(32 BYTE)     No          1
DESCRIPTION     VARCHAR2(2000 BYTE)     Yes          2
CONTENT     BLOB     Yes          3
I've checked and the source database does contain data in the blobtable and both databases have the same tables, so now I have no idea what can be wrong? =/

For initial loads with LOBs, use a RMTFILE and a normal replicat. There are a number of things that are not supported with "RmtTask". A "rmtfile" is basically the same format as a 'rmttrail' file, but is specifically for initial loads or other "captured" data that is not a continuous stream. And make sure you do have a newer build of GG (either v11 or a latest 10.4 from the support site).
The 'extract' would look something like this:
ggsci> add extract e1aa, sourceIsTable
ggsci> edit param e1aa
extract e1aa
userid ggs, password ggs
-- either local or remote
-- extFile dirdat/aa, maxFiles 999999, megabytes 100
rmtFile dirdat/aa, maxFiles 999999, megabytes 100
Table myschema1.*;
Table myschema2.*;
Then on the target, use a normal 'replicat' to read the "files".
Note that if the source and target are both oracle, this is not the most efficient way to instantiate the target. Using export/import or backup/restore (or any other mechanism) would usually be preferable.

Initial Load Error

Hi All
I am trying to make inital load but I am receiving the following error.
But trail file has been created on target in dirdat folder about 2GB size
Source and Destination windows2003 32 Bit
GG version is 11.2.1.0.1 OGGCORE_11.2.1.0.1_PLATFORMS_120423.0230
Have you any idea??
Source Context :
SourceModule : [er.extrout]
SourceID : [er/extrout.c]
SourceFunction : [complete_tcp_msg]
SourceLine : [1480]
2013-01-09 18:00:57 ERROR OGG-01033 There is a problem in network communication, a remote file problem, encryption keys for target and source do not match (if using ENCRYPT) or an unknown error. (Remote file used is ./dirdat/INITLOAD01.DAT, reply received is Error 0 (The operation completed successfully.) getting position in ./dirdat/INITLOAD01.DAT).
2013-01-09 18:00:57 ERROR OGG-01668 PROCESS ABENDING.
ggserr.log on target
OGG-01223 Oracle GoldenGate Collector for Oracle: Error 0 (The operation completed successfully.) getting position in ./dirdat/INITLOAD01.DAT.
INFO OGG-01670 Oracle GoldenGate Collector for Oracle: Closing ./dirdat/INITLOAD01.DAT.
INFO OGG-01676 Oracle GoldenGate Collector for Oracle: Terminating after client disconnect

Why do you keep naming the file?
Enter the parameters listed in Table 26 in the order shown, starting a new line for each parameter statement. The following is a sample initial-load Extract parameter file for
loading data from file to Replicat.
<your extract name>
SOURCEISTABLE
SOURCEDB mydb, USERID ogg, PASSWORD
AACAAAAAAAAAAAJAUEUGODSCVGJEEIUGKJDJTFNDKEJFFFTC &
AES128, ENCRYPTKEY securekey1
RMTHOST ny4387, MGRPORT 7888, ENCRYPT AES 192 KEYNAME mykey
ENCRYPTTRAIL AES192, KEYNAME mykey1
RMTFILE /ggs/dirdat/initld, MEGABYTES 2, PURGE
TABLE hr.*;
TABLE sales.*;

Initial Load Extract (Date Format)

Hi ,
I'm doing an Initial Load Extract (File To Replicat ) for module of 30 GB , and I'm getting the following error at on the extracted tables :
ERROR OGG-00665 OCI Error error executing fetch with error code 1801 (status = 1801-ORA-01801: date format is too long for internal buffer), SQL<SELECT ........
My concerns are :
1- How to overcome this error , without updating the source data ?
2- How to deal with that at the target side (If the data replicated ) , so it'll not affect the business needs
Thanks So Much

Thanks 960104 for your interest
>> Source GG
11.1.1.1.2
DB is 10.2.0.4
++++++++++++++++++++++++++++++++++
Target GG
Version 12.1.2.1.0
DB is 12.1.0.2.0
Report file is only for extract ,as I'm pushing the trails to remote only without doing the replicat at the moment
=================================================================
2015-01-25 10:23:53 INFO
OGG-01026 Rolling over remote file /u04/GG_TRAILS/ff000001.
2015-01-25 10:23:56 INFO
OGG-01026 Rolling over remote file /u04/GG_TRAILS/ff000002.
2015-01-25 10:24:00 INFO
OGG-01026 Rolling over remote file /u04/GG_TRAILS/ff000003.
551606 records processed as of 2015-01-25 10:24:00 (rate 49204,delta 49204)
2015-01-25 10:24:05 INFO
OGG-01026 Rolling over remote file /u04/GG_TRAILS/ff000004.
2015-01-25 10:24:08 INFO
OGG-01026 Rolling over remote file /u04/GG_TRAILS/ff000005.
1062596 records processed as of 2015-01-25 10:24:10 (rate 50097,delta 51098)
2015-01-25 10:24:12 INFO
OGG-01026 Rolling over remote file /u04/GG_TRAILS/ff000006.
2015-01-25 10:24:16 INFO
OGG-01026 Rolling over remote file /u04/GG_TRAILS/ff000007.
2015-01-25 10:24:20 INFO
OGG-01026 Rolling over remote file /u04/GG_TRAILS/ff000008.
1471164 records processed as of 2015-01-25 10:24:21 (rate 46541,delta 39289)
Source Context :
SourceModule
: [ggdb.ora.sess]
SourceID
: [/scratch/pradshar/view_storage/pradshar_bugdbrh40_12927937/oggcore/OpenSys/src/gglib/ggdbora/ocisess.c]
SourceFunction
: [OCISESS_try]
SourceLine
: [501]
ThreadBacktrace
: [10] elements
: [/u01/GG/extract(CMessageContext::AddThreadContext()+0x26) [0x664446]]
: [/u01/GG/extract(CMessageFactory::CreateMessage(CSourceContext*, unsigned int, ...)+0x7b2) [0x65aee2]]
: [/u01/GG/extract(_MSG_ERR_ORACLE_OCI_ERROR_WITH_DESC_SQL(CSourceContext*, int, char const*, char const*, char const*, CMessageFactory::MessageDisposition)+0xb2) [0x613232]]
: [/u01/GG/extract(OCISESS_try(int, OCISESS_context_def*, char const*, ...)+0x48b) [0x5a3c2b]]
: [/u01/GG/extract(DBOCI_get_query_row(file_def*, int, int*)+0x95e) [0x923558]]
: [/u01/GG/extract(gl_get_query_row(file_def*)+0x10) [0x933e2c]]
: [/u01/GG/extract [0x87d18d]]
: [/u01/GG/extract(main+0x11e1) [0x527aa1]]
: [/lib64/libc.so.6(__libc_start_main+0xf4) [0x392f81d994]]
: [/u01/GG/extract(__gxx_personality_v0+0x1ea) [0x4f32ca]]
2015-01-25 10:24:21 ERROR OGG-00665 OCI Error error executing fetch with error code 1801 (status = 1801-ORA-01801: date format is too long for internal buffer), SQL<SELECT x."ID",x."STATUS",x."STATUS_DATE",x."UPDATE_DATE",x."CREATED_BY",x."CREATION_DATE",x."UPDATED_BY",x."DIR_ID",x."LOC_ID",x."TICKET_DATE",x."TICKET_TIME",x."ROAD_SPEED",x."VEHICLE_SPEED",x."RADAR>.
2015-01-25 10:24:21 ERROR OGG-01668 PROCESS ABENDING.
=================================================================
End of Report file
Thanks

No initial load of Customers, Material and delta load of Sales Orders.

Hi Experts,
I am facing a very troublesome issue. I am not able to setup the Middleware portion for initial and delta loads. I read a lot of documents and corrected a lot of things. finally, the connectivity is done with R/3 and CRM. Initial load of all objects is successful (as per Best PRactices guide). Customizing load is successful.
But after now I have these open issues for which I am unable to find any answers (am really exhausted!!):
- Customer_main load, it was succesful, but no BP's of R/3 are available.
- Material, it failed in SMW01, SMQ2, the errors are:
Mat. for Initial Download: Function table not supported
EAN xxxxxxxxxxxxxxxxxx does not correspond to the GTIN format and cannot be transferred
EAN yyyyyyyyyyyyyyyyyy does not correspond to the GTIN format and cannot be transferred
Plant xx is not assigned to a business partner
- Sales order, it shows green bdoc, but error segments says "No upload to R/3" and the order does not flow to R/3.
We had our system setup 3 years back for data transfer and Middleware. But few things changed and connectivity stopped. I did all that again now, but am not yet successful. Any inputs will be greatly appreciated.
Thanks,
-Pat

Hi Ashvin,
The error messages in SMW01 for MAterial initial load is :
     Mat. for Initial Download: Function table not supported
     EAN 123456789000562 does not correspond to the GTIN format and cannot be transferred
     EAN 900033056531434 does not correspond to the GTIN format and cannot be transferred
     Plant 21 is not assigned to a business partner
I have done the DNL_PLANT load successfully. Why then the plant error?
Some of the messages for BP:
Messages for business partner 1331:
No classification is assigned to business partner 1331
For another,
     Partner 00001872(469206A60E5F61C6E10000009F70045E): the following errors occurred
     City Atlanta does not exist in country US
     Time zone EST_NA does not exist
     You are not allowed to enter a tax jurisdiction code for country US
     Validation error occurred: Module CRM_BUPA_MAIN_VAL, BDoc type BUPA_MAIN.
Now, the time zone EST is assigned by default in R/3. Where do I change that? I do not want to change time zones as this may have other impacts. Maybe CRM I cna change this, not for sure in R/3. City check has been deactivated in R/3 and CRM, still the error.
Till these 2 are not solved, I cannot go into the Sales order loads.
Any ideas will be greatly appreciated.
Thanks,
-Pat

Initial load of sales orders from R3 to CRM without statuses

1) Some sales orders were uploaded into CRM without statuses in the headers or line items.
2) Some sales orders were uploaded without status, ship-to, sold-to, payer.....If I deleted them and use R3AR2, R3AR4 to upload each individual then no problem.
Any ideas or suggestions?
Thanks.

Hi,
   Request load of adapter objects uses different extractor modules for extracting the data from external system to CRM. While your initial load of sales docs. will use a different extraction logic bases on the filter conditions specfied on trx.
R3AC1
   There may be a problem in the extraction of data from the source system (don't know if you are using a R/3). Can you please de-register the R/3 (i suppose) outbound queue using trx.
SMQS
, and then debug the extraction (R/3 outbound) before the data is sent to CRM using FM
CRS_SEND_TO_SERVER
   If this goes well, you may try debugging the mapper in CRM inbound and the validation module in CRM as a last resort. Also, please refer to trx.
SMW01
to see if the Bdocs are fully processed.
Hope this helps...Reward if helpful.
Regards,
Sudipta.

After Upgrade BI Initial load is taking much time

Dear Friends,
We had BW 3.5 on Windows 2003(32 bit) & SQL 2000.
I upgraded it to BI 7.01 (EHP1 SR1) with Windows 2003(64bit),SQL 2005 & completed all followup activities.
Now when we are doing initial load it is taking long time. Please do let me know your inputs as soon as possible.
Regards,
Sunil Maurya.

Hi ,
I created the thread under netweaver forum.
But still I'll check & try create it in correct forum.
Regards,
Sunil Maurya

MacBook Pro (mid 2010) - Slow Startup and Initial Load of Apps after Mavericks Install

Hello everyone,
Long time Snow Leopard user here. I've been absolutely, 100% thrilled with my MBP's performance / speed since mid 2010. Since installing Mavericks I've noticed two things:
1. Initial on boot load times seem much slower
2. The first time you open an app (Safari, even TextEdit) is far slower than in Snow Leopard.
Now granted, once the computer has been on for about 5 minutes, and once you've had an application open for 1-2 minutes, than performance is okay once again. But it seems that quite literally everytime you do "anything" for the first time since the computer has been turned on you run the risk of a spinning beachball and an extended wait. This simply never happened in Snow Leopard.
I'm not a computer science major but I do understand that when you do something for the first time since a reboot it will need to load new files into the RAM which takes time. However, I've been using this computer since 2010 and have never experienced this behavior / speed / delay, etc... something seems fundamentally different.
For example, even just opening finder, and navigating to the Applications folder results in sluggish behavior the first time. Also, anytime you first click the top menu bar in an application you run the risk of a beachball.
It doesn't seem like a failing hard drive because I can read/write large chunks of data one an app is finally loaded. It's just initially loading the app takes quite literally 10-20 times longer than Snow Leopard. It seems like perhaps Mavericks itself, the core of the new OS was perhaps installed in a bad sector of the HD, but none of my other files are on bad sectors... if that makes sense. Again - I'm not a computer science major so I'm largely just making things up
It also seems as if multitasking and switching between several open apps has seen a decrease in performance. Could it be that perhaps Mavericks RAM management is superior to Snow Leopard, but only if there is a TON of RAM to go around? Could it be as simple as Macs with only 4GB installed should not be allowed to even install Mavericks?
Does this sound normal for Mavericks considering I have a C2D processor, a non SSD, and only 4GB ram? I know those specs are "outdated" for 2014, but keep in mind these were the specs that I've always had and with Snow Leoapard I was consistently thrilled with the speed of the computer.
I suppose my question is: should my strategy be to simply turn the computer on, get a cup of coffee and let everything load and maybe even have my frequently used apps load on startup, etc... and carry on as normal? Does something seem off? Should I invest in a new SSD / RAM upgrade? I know the upgrades couldn't hurt, but the issue is that I was perfectly content until upgrading to Mavericks
I've tried booting into OS X Recovery mode and using the Disk Utility. I've tried Safe Mode. I've included a "EtreCheck" report below. I'm open to any ideas / suggestions.
Thanks!!
Hardware Information:
 MacBook Pro (13-inch, Mid 2010)
 MacBook Pro - model: MacBookPro7,1
 1 2.4 GHz Intel Core 2 Duo CPU: 2 cores
 4 GB RAM
Video Information:
 NVIDIA GeForce 320M - VRAM: 256 MB
System Software:
 OS X 10.9.1 (13B42) - Uptime: 0 days 0:10:48
Disk Information:
 Hitachi HTS545025B9SA02 disk0 : (250.06 GB)
 EFI (disk0s1) <not mounted>: 209.7 MB
 Macintosh HD (disk0s2) / [Startup]: 249.2 GB (228.46 GB free)
 Recovery HD (disk0s3) <not mounted>: 650 MB
 MATSHITADVD-R UJ-898
USB Information:
 Apple Inc. Built-in iSight
 Apple, Inc. Keyboard Hub
 Logitech USB Receiver
 Apple Inc. Apple Keyboard
 Apple Internal Memory Card Reader
 Apple Inc. BRCM2046 Hub
 Apple Inc. Bluetooth USB Host Controller
 Apple Computer, Inc. IR Receiver
 Apple Inc. Apple Internal Keyboard / Trackpad
FireWire Information:
Thunderbolt Information:
Launch Daemons:
 [System] com.adobe.fpsaud.plist 3rd-Party support link
Launch Agents:
 [System] com.adobe.AAM.Updater-1.0.plist 3rd-Party support link
 [System] com.adobe.AdobeCreativeCloud.plist 3rd-Party support link
User Launch Agents:
 [not loaded] com.adobe.AAM.Updater-1.0.plist 3rd-Party support link
 [not loaded] com.google.keystone.agent.plist 3rd-Party support link
User Login Items:
 None
Internet Plug-ins:
 FlashPlayer-10.6: Version: 11.9.900.152 - SDK 10.6 3rd-Party support link
 Flash Player: Version: 11.9.900.152 - SDK 10.6 Outdated! Update
 QuickTime Plugin: Version: 7.7.3
 JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Outdated! Update
 AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 3rd-Party support link
 Default Browser: Version: 537 - SDK 10.9
Audio Plug-ins:
 BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
 AirPlay: Version: 1.9 - SDK 10.9
 AppleAVBAudio: Version: 2.0.0 - SDK 10.9
 iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
 Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes:
 Flash Player 3rd-Party support link
Old Applications:
 None
Time Machine:
 Time Machine not configured!
Top Processes by CPU:
 4% WindowServer
 1% EtreCheck
 0% mds
 0% mds_stores
 0% airportd
Top Processes by Memory:
 111 MB com.apple.IconServicesAgent
 94 MB Finder
 57 MB Dock
 53 MB SystemUIServer
 53 MB EtreCheck
Virtual Memory Information:
 1.64 GB Free RAM
 1.42 GB Active RAM
 314 MB Inactive RAM
 390 MB Wired RAM
 316 MB Page-ins
 0 B Page-outs

Wish I could be of some help, but I'm having similar issues on my mid 2011 macbook pro with 8 GB ram. It's very frustrating. I haven't worked on a computer this slow since the early 90's. Even simple things like signing in to this site bring up the beach ball for maybe ten seconds. When opening up apps I often have to wait minutes, and often end up force quitting when they hang. I'm using force quit a dozen or more times a day, when it used to be very rare.
I don't know if it's Mavericks. I installed a new hard drive in November, but the problems really started getting bad since the latest upgrade.
It's not just opening apps. If I have an app open in the background and switch to it I have similar issues. Watching a simple video is often accompanied by stalls and delays - which is really bad as I'm often using the laptop to edit video. It's become unuseable for work.
Perhaps the most frustrating is clicking on a link, only to find Safari decides to complete a previous scroll that it had paused. The page jumps down, and sometimes I end up clicking on a link I didn't want. Then I have to wait for THAT spinning beach ball before I can go back to the previous spinning beach ball.
It can take up to ten minutes to restart. I've tried everything I could find on these pages so far, and nothing has worked.
I thought maybe it was something I've done (and perhaps it is), but I keep seeing others with similar issues.

How to use more than one application server during initial load?

Hi,
we plan to use more than one application server in CRM during initial download in order to increase the number of parallel requests and to decrease the time for the initial load. Is there a way to allocate requests to more than one server? Is is possible via multiple rfc connections for consumer CRM in CRMRFCPAR?
Thanks.
Alexander Schiffer

Hi Naresh,
thanks for your answer. It has solved my problem. SMLG is the transaction that I was looking for.
Two more OSS notes that helped me to guide our basis into the right direction:
OSS 593058 - New RFC load balancing procedure
OSS 1413986 - SMLG: Possibility to select a favorite type for Ext.RFCs
Thanks again.
Alexander Schiffer

Error while Initial load

Hi Forum,
Iam doing Middleware setup for downloading customer master from R/3 to CRM.Iam trying to do initial load of customizing objects viz.,DNL_CUST_ACGRPB,DNL_CUST_ADDR,
DNL_CUST_KTOKD,DNL_CUST_TVKN,DNL_CUST_TVLS,DNL_CUST_TVPV... which are to be loaded before doing initial load of CUSTOMER_MAIN.
while doing initial load of customizing objects iam getting the below mentioned error
001 No generation performed. Call transaction GN_START.
002 Due to system errors the Load is prohibited (check transaction MW_CHECK)!
-when I do GN_START
"A job is already scheduled periodically.
Clicking on 'Continue' will create another job
that starts immediately.
Do you want to continue?" message is displayed
and I have sheduled it.
But in SMWP transaction I can see in
BDoc Types: Generation of other runtime objects
Not generated / generated with errors 2 entries
 31.08.2006 05:33:50
and the objects with errors are
POT_LISTWRITE
SPE_DDIC_WRITE
-In transaction MW_CHECK, system displays message as No generation performed. Call transaction GN_START.
when I regenerate these objects(generated with errors)from the context menu I find no difference.
I have also referred to the Note :637836 and 661067 which also suggests to run few reports and GN_START but inspite of doing all the corretion parameters in the note Iam still unable to come out of the situation.
Please Guide
Thanks in Advance
Shridhar.
Message was edited by: Shridhar Deshpande

Hi Rahul,
Thanks for the reply.I checked in transaction MW_CHECK and the system throws the message as
No generation performed. Call transaction GN_START.
In the long text the below message is available
No generation performed. Call transaction GN_START.
Message no. SMW_GEN_KERNEL005
Diagnosis
An upgrade was performed.
System response
The Middleware is stopped because MW objects must be generated.
Procedure
Excecute transaction GN_START.
If GN_START is executed,I dont find any change.
I also checked in smq2in CRM and I found the status of the queue as below
 CL Queue Name Entries Status Date
200 CSABUPA0000000042 5 SYSFAIL 31.08.2006 09:54:05 31.08.2006 09:54:11
Thanks
Shridhar
Message was edited by: Shridhar Deshpande

Connection Refused Error while running AS ABAP Initial Load

All,
I've never connected SAP NW IdM to an actual SAP system before, and I feel like I'm missing some obvious step of configuration, but I can't figure out what.
We are in the process of trying provision user accounts to our SAP ABAP systems. My first step was to try to read all of the existing accounts from the ABAP system:
Our Basis team created me a Communication user with the proper authorizations (I ensured that the authorizations included in SAP_BC_SEC_IDM_COMMUNICATION)
I created a repository using the SAP NewWeaver AS ABAP (Specific Application Server) Repository Template (No CUA, No SNC) using that user's credentials
I then used the Job Wizard and used the job template AS ABAP - Initial Load, specifying my repository above.
When I run the job I get the following:
Initializing SAP connection with parameters:
com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to message server failed Connect_PM MSHOST=<IPADDRESS>, R3NAME=<SID>, GROUP=PUBLIC LOCATION CPIC (TCP/IP) on local host ERROR partner not reached (host <IPADDRESS>, service sapms<SID>) TIME Wed Jun 01 13:54:36 201 RELEASE 640 COMPONENT NI (network interface) VERSION 37 RC -10 MODULE nixxi_r.cpp LINE 8840 DETAIL NiPConnect2 SYSTEM CALL SiPeekPendConn ERRNO 10061 ERRNO TEXT WSAECONNREFUSED: Connection refused COUNTER 1
Error Init failed
I'm running SAP NW IdM 7.1 SP5 on Windows Server 2003 with MSSQL 2005. The ABAP server is on a UNIX box with an Oracle 10.2 dB.
Is there additional configuration that needs to take place on the ABAP side to accept the connection?
I've tried to find documentation on this, but have been unsuccessful. If someone could point me to the correct documents, or at least point me in the right direction for troubleshooting, it would be greatly appreciated.

Ankur,
Looks like the endpoint URL of the webservice is not updated and still pointing to the localhost. Try changing it to http://<ip_addres_of_your_server>:7101..... and see if it works fine then.
-Arun

Sales document types during initial load

Hi Gurus,
Landscape - SAP R/3 4.6 c, CRM - 4.0
We are starting the initial load for the Sales documents, item categories etc.
For the same, for the document types in R/3, we have the same document type in CRM.
Question 1- Do I need to configure the partner determination, incompletion log etc for the document type before the initial load or I can do it later once the data is in CRM.
Question 2- Is it mandatory that for all the doc types in R/3, we have the respective document type in CRM? Logically yes, if yes, where can I find the mapping? For example for OR in R/3, there is a TA in CRM.
Request someone to answer this ASAP.
thanks
Yash

Hi Yash,
I think the behavior is just use the same code
of Transaction Type in CRM and Order Type in R/3.
Since partner determiniation using different partner
function codes in CRM and R/3, maintained or not in R/3,
you may still need to maintain it again in CRM.
For document, what you can do just create same document
type (Transaction type) for R/3 and CRM. And depends upon
you sceneario (in CRM there are several scenarios such as
document created in CRM and transfered to R/3 Or download
R/3 document into CRM - no transaction in CRM).
Especially for partner, you may need to setup data
transfer CRM to R/3 or R/3 to CRM in CRM configuration.
And in R/3 you need to define it in tcode PIDE.
Hope this helps.
Cheers,
Gun.

Replicating data once again to CRM after initial load fails for few records

My question (to put it simply):
We performed an initial load for customers and some records error out in CRM due to invalid data in R/3. How do we get the data into CRM after fixing the errors in R/3?
Detailed information:
This is a follow up question to the one posted here.
Can we turn off email validation during BP replication ?
We are doing an initial load of customers from R/3 to CRM, and those customers with invalid email address in R/3 error out and show up in SMW01 as having an invalid email address.
If we decide to fix the email address errors on R/3, these customers should then be replicated to CRM automatically, right? (since the deltas for customers are already active) The delta replication takes place, but, then we get this error message "Business Partner with GUID 'XXXX...' does not exist".
We ran the program ZREPAIR_CRMKUNNR provided by SAP to clear out any inconsistent data in the intermediate tables CRMKUNNR and CRM_BUT_CUSTNO, and then tried the delta load again. It still didn't seem to go through.
Any ideas how to resolve this issue?
Thanks in advance.
Max

Subramaniyan/Frederic,
We already performed an initial load of customers from R/3 to CRM. We had 30,330 records in R/3 and 30,300 of them have come over to CRM in the initial load. The remaining 30 show BDOC errors due to invalid email address.
I checked the delta load (R3AC4) and it is active for customers. Any changes I make for customers already in CRM come through successfully. When I make changes to customers with an invalid email address, the delta gets triggered and data come through to CRM, and I get the BDOC error "BP with GUID XXX... does not exist"
When I do a request load for that specific customer, it stays in "Wait" state forever in "Monitor Requests"
No, the DIMA did not help Frederic. I did follow the same steps you had mentioned in the other thread, but it just doesn't seem to run. I am going to open an OSS message with SAP for it. I'll update the other thread.
Thanks,
Max

Initial Load of IS-U business partners to CRM - wrong business partner cat

Hi Gurus,
when donwloading CUSTOMER_MAIN from R/3 to CRM
Where is determined that the business partner in CRM should be created in the business partner category 'Person'?
We have the problem that all our business partners in CRM are now 'Organizations' (but were sold-to-parties in R/3 with account group DEBI)
PIDE - setting is:
R/3 account group DEBI ---> classisifaction 'B' ('Customer')
In the customizing of the business partner roles for the role type CRM000 (and for all the others) Organization, Person and Group is all allowed by default.
The download itself and the number ranges work fine.

The reason for the problem is unknown but a workaround is to first initial load BUPA_MAIN instead of CUSTOMER_MAIN, then the right business partner category is taken by the system

OGG- Initial load

Similar Messages

Maybe you are looking for