Oh my gosh this is driving me crazy.

fios has been great, for two years. recently this problem keeps coming back!!
whenever the landline receives a phone call or dials, the internet goes off! I have to manually connect otherwise it
stays OFF!!!!
I thought it was just temporary but it's been doing that for almost two months!!
it's driving me crazy!!!! can somebody do something???????????
thanks in advance!
Solved!
Go to Solution.

regardless if you knowingly changed somethng or not.... follow the steps...
I bet 5 bucks your issue will be resolved
Bob Robertson - Lighter Klepto - I steal lighters, not bandwith

Similar Messages

Every time I sync my Iphone 5c(with ios 8) to Itunes, it 1. deletes all of my purchased music 2. deletes all of my album artwork 3. replaces all of my deleted songs. please help! this is driving me crazy!

Every time I sync my Iphone 5c(with ios 8) to Itunes, it 1. deletes all of my purchased music 2. deletes all of my album artwork 3. replaces all of my deleted songs. please help! this is driving me crazy! It syncs 100+ songs, when I only want to sync 1! I'm running Itunes 11.3.1.2

After having experienced similar problems and having it back to work, I have a few suggestions:
- Try to find out if the syncing stops at a particular track or song. That might - out of the blue - have gotten corrupted in one way or another. Since that song will not be on the iPod, iTunes will try over and over to put it on and crash in one way or another;
- reformat the iPod as described in the iTunes 9 crash-thread. It takes time (at first it seems to do nothing, but that is because the green bar is moving with very small steps);
HTH

Every time I've tried to open my hotmail today, an H&R Block site pops up trying to get me to buy their tax prep software and I can't find a way around it. This is driving me crazy. Please help.

Every time I've tried to open my hot mail today the page is usurped by H&R Block, trying to get me to buy their tax prep software and I don't see a way to close it out.

No, it doesn't come up in any other browser. The interesting thing this morning was I had inadvertently doubleclicked my hotmail icon and two windows came up, one over the other. The first one had the H&R Block site that is driving me crazy, which I closed, but the second one had my dear old emails without the dreaded H&R Block takeover. I haven't been able to send a picture of the page, but it looks like an H&R Block web site and lists the various tax prep software and prices. You can navigate all around the site, too.

HT3951 I purchased a movie and it downloaded to my computer but it is not on my ipod and it will not sync manually. It showes upin my purchased list on ipod but not in my videos. HELP THIS IS DRIVING ME CRAZY

I purchased a movie and it downloaded to my computer but it is not on my Ipod touch. It will not sync manually, I've tried. It shows up on my ipod as purchased but it is not in my videos. When I go to the movie from purchases it says DOW in the corner.HELP THIS IS DRIVING ME CRAZY

Hello,
If you have an iPod Touch you can watch movies on it.
Did you sync the movie with iTunes between your computer and your iPod ?
Connect iPod touch to a USB 2.0 port on your Mac or PC using the included cable.
Follow the onscreen instructions in iTunes to set up iPod touch and sync your music, video, photos, and other content.
Your computer must be connected to the Internet.
By default, iTunes automatically syncs all songs and videos in your iTunes library to iPod touch. If you have more content in your library than will fit on iPod touch, iTunes alerts you that it can’t sync your content. You’ll need to use iTunes to select some of your songs, videos, and other content to sync.

Ok, this is driving me crazy...

I apologise for the rant this is really annoying me (and it's probably just my lack of understanding).
I don't understand why when i move an Album to another project, it doesn't move the Master files associated with that album into the new project.
I'm just starting out with Aperture and I have over 2000 photos that i'm trying to organise into Aperture and I'm trying to move things around so they're in a more logical organised file structure. When I imported my photos, Aperture threw everything into one Project and divided everything below the Project (which I called "Old Photos") into brown folders and Albums. Now, I'm trying to move these photos into seperate Projects. For example;
After the import, I have a brown folder called "India Trip", and in this folder are around 30 Albums called "Day 1", "Day 2" etc etc (this is all within my "Old Photos" project). I've created a new Project called "India" and I want to move the albums over to it but the only way I can find to do this is to first click/drag the albums over (which doesn't copy the masters) and then go into each and every album, select all, and drag into the new Project in order to move the masters.
There MUST be an easier way of moving these images than this, right...? Am I just being an idiot?
Thanks in advance.

Yep, I understand that a Master can only exist in one project and that images in Albums are just links (thanks to your blog btw, it's been very helpful ), however when I look at the project level, all I see are hundreds of photos and it's not a very useful view to move specific sets of photos out of the project.
It seems like a crazy design decision to allow a user to move an album (a set of links) from one project that holds the masters it's linking to, into another project without giving you the option of moving the masters as well.
I appreciate that the way I imported the images (the default way) probably wasn't the best. but are you saying that the only way to move masters out of one project into another is to do it at the root/Project level? If that's the case, what's the point in having a folder structure? Like I said, i sure it's a mix between me not understanding Aperture and not being used to it.
I think I need to get to a point where I have alot more Projects with far fewer photos in but I'm not sure how best to get there.
Again, I apologise for the rant - I don't mean to. If anyone can give me any advice on how best to manage 2000 photos using Aperture then I would greatly appreciate it.

Please help, this is driving me crazy

I bought a new song just to use as a ring tone on my iphone and it wont let me create it.
I made sure i'm signed in, have the view ringtone setting enabled, and
have the latest version of itunes.
the error i get is " This song cannot be made into a ringtone
nothing hurts by various artists can no longer be made into a ringtone" and this happened with any song i purchase from itunes

pls consider stating the actual specific issue in the Title of your post - people tend NOT to take the time to read a post that says 'Has this happened to you?' or the like - so your more likely to be viewed if you be more specific. Generic 'help, how do you fix this?' type titles are getting old for the rest of us as well. Thanks.

Help! This is driving me crazy. CASE statement report syntax error (missing operator)

Hi
Can anyone help with this SQL statement please. It uses a
CASE statement but I keep getting back a syntax error (missing
operator) error message. The SQL statement works without the CASE
statement, so everything else is fine - its just when I put the
CASE statement back in.
Here's the SQL statement:-
SELECT transactions.ourRef, transactions.transDate, CASE WHEN
transactions.transTypeID = 2 THEN transactionDetails.goodsVatable *
-1 ELSE transactionDetails.goodsVatable END,
transactionDetails.goodsNonVat, transactionDetails.VAT,
transactionDetails.grandTotal, clients.clientCode,
transTypes.transTypeDesc
FROM transactions, transactionDetails, clients, transTypes
WHERE transactions.transID = transactionDetails.transID
AND transactions.clientID = clients.clientID
AND transactions.transTypeID = transTypes.transTypeID
TransID = 2 means that its a credit not instead of an
invoice, therefore I want the goods vatable returned as a negative
number.
Thanks in advance.
Wez

quote:
...the client wishes for me to use an MS Access db
Too bad you didn't say that to begin with. I believe that
with Access you might consider using IIF().
Syntax:
IIf(expr, truepart, falsepart)
SELECT transactions.ourRef,
transactions.transDate,
IIf(transactions.transTypeID = 2,
transactionDetails.goodsVatable * -1,
transactionDetails.goodsVatable),
transactionDetails.goodsNonVat,
transactionDetails.VAT,
transactionDetails.grandTotal,
clients.clientCode,
transTypes.transTypeDesc
FROM transactions, transactionDetails, clients, transTypes
WHERE transactions.transID = transactionDetails.transID
AND transactions.clientID = clients.clientID
AND transactions.transTypeID = transTypes.transTypeID
Phil

Ethernet/Wireless internet problems..This is Driving me CRAZY..please help!

Alright i hope someone out there can solve my problem because i am about to throw my macbook against the wall. This is my problem:
Everytime i go on to the internet, in order for the internet to work i have to pull my ethernet cable out of the plug, plug it back in and refresh the page. The internet then works for about 4 pages on avg. and then it times out and says im not connected. In order to continue surfing on the net i have to pull the cable out and plug it back in. The wireless acts the same way. It will work and then times out. I have to turn off the airport and back on to get any internet.
The browsers im using are Safari 3.1.2 and Firefox 3.0.1 and both act the same way. My roommate has a PC and has had no problems whatsoever. Our internet comes through the wall from a plug not from a router. I personally believe that it is my computer because i have tried getting internet from the plug in his room and the same thing happens. The wireless around my school comes from different towers and no matter where im at the same thing happens. I dont believe that its the internet. Ohh and one more piece of info. My first year at school my computer gave me NO internet problems whatsoever. I bought the computer brand new in June of 2007.
If anyone knows how to fix this extremely annoying problem, please help me!! Thanks to all who answer~

Hi
I'm getting a problem which may be related, and i've figured out some workarounds (sort of inadequate ones but at least they're something).
PROBLEM DESCRIPTION: almost immediately after installing the 10.5.5. system update, my MacBook started disconnecting itself from my wireless network. i'd be working online and suddenly i'd notice that only 3 bars of the AirPort icon on the menu bar would be showing and that the internet connection was no longer there. the only way to get the connection back would be to switch airport off and then back on and it would connect again. a couple of minutes later the connection would be gone again. infuriating stuff! i checked the system log using the Apple System Profiler (from the Apple menu) and found some messages about there being too many state changes detected on the AirPort network interface and that measures were being taken to fix stuff. it's a pity i didn't save the original error message since i no longer get it, but here's one I found that's identical reported by someone else:
May 25 16:50:57 phoebe mDNSResponder[22]: Note: Frequent transitions for interface en1
(FE80:0000:0000:0000:021E:C2FF:FEB9:8B73); network traffic reduction measures in effect
anyway, the "measures" seemed to be to simply disconnect me from the net, which wasn't great. now the forums mentioned various solutions, but none of them actually worked.
SOLUTION/WORKAROUND: two things seem to have made a difference. 1. i downloaded the combo 10.5.5. system updater and reinstalled it. somehow after i did this the problem would no longer happen (at least those errors would no longer occur). 2. keeping my ipod touch wireless interface switched off, because whenever my touch comes online within a minute or two the iBook disconnects from the net.
COMMENTS: (1) even now if i connect to the wireless network with my iPod, my MacBook's connection will drop - so my solution is to not connect to the wireless network with my iPod touch, which ***** because i like to read stuff in bed on the touch sometimes. (2) reinstalling the system update (the combo version) definitely helped, because before i kept getting that error message in the system log, and even if the iPod touch was switched off the MacBook would still disconnect. (3) this suggest that there were two separate problems, one to do with a corrupted AirPort driver or something of that sort (which was fixed when I reinstalled the system update), and another to do with being kicked off when the iPod touch connects to the wireless network (this problem remains).
I've replace my Linksys wireless router with a Netgear wireless router, but that's made no difference, so i'm pretty sure that the problem has to do with the MacBook - either the hardware or the software. I plan to get another hard disk soon at which point i'll do a clear reinstall of the OS, and if the problem persists then i'll know that it's a MacBook hardware problem. =(
i'll post again here in the future, but if anyone has comments or suggestions or reports of this kind of problem then your input would be highly appreciated.
thanx
dr.colekat

How can I stop this, its driving me crazy

How on earth can I stop e-mails arriveng in their hundreds to my PC I have gone to prferences ticked all the boxes NO but still keep gtting them

Arriving from where ? If you mean from these forums then see if this user-tip help : https://discussions.apple.com/docs/DOC-3661

This is driving me crazy!!! Help with first time exporting files from computer to MP3 Pla

Hello All.
I'd REALLY appreciate any guidance here. I bought a USB converter to USB 2. My computer does detect it, but I cannot find it when I go to the sources and go under my computer. All that comes up at that point is the A,C, and D dri'ves. When I go to my computer icon on my desktop it shows Creative Zen as on there. Does anyone have any tips on how to get the USB dri've to come up under sources?
This is so much work to be putting into just getting some music into this player!!!
Thanks so much.

Go to: My Computer/Control Panel/System/Device Manager. Scroll down the Device Manager menu until you see USB devices. If there is a yellow triangle beside one of them, you probably have to update the driver from the install CD that your USB 2 card came with.
Reboot and it should be OK.

3 Apps stuck on loading .... HELP ME PLZ!!!!! THIS IS DRIVING ME CRAZY!!!

So I was updating my app's yesterday and now I have 3 app windows that randomly appear on my iphone
They do not have the name of the app below them .. it just says LOADING below the app square
You can not delete them because they do not have a X above them when you try.
This also drains my battery very quickly because it seems the phone is repeatedly trying to download something
My app window keeps opening asking me to put in my password even though I am doing nothing APP related =(
So I did a system restore .... didn't help
reset the Iphone .... didn't help
I used I-tunes to back up and restore ... deleted the apps on I-tunes
tried every "trick" that was on any forums
Nothing works!
Someone Please Help me!!!!!
I love love love my i-phone ... it probably is the best device I have ever purchased but small things like this drive me crazy

first, remember how much you cherish that lil lovely device always. Don't "APP BROWSE" to pass the time. IT'S NOT A GAME! ;P
second, It's BEST TO PROVIDE INFO. ON SPECS OF WHAT UR WORKING WITH. IE-iphone3G3Gs???/current iphone OS.update.ver.release(at time of device malfunction)/iTUNES.ver/complete app list(including ver. info. and......so on.
NEhow, stop attempting to pull ?"tricks"?, as of right now. I THINK B-UP UR IPHONE (afterwards) was a bad idea. If by chance, you havn't done this, DON'T! Unplug usb data sync cable from iTunes. Delete all b-up/restore files up to last known "good" working backup.
I HOPE YOU HAVE A 3G MODEL and/or APPLECARE. Go straight to an Apple store and swap for an AppleCare warranty replacement. If you're fortunate to get a "DO-OVER", consider your next steps carefully!! Until, you provide all the specs.(YES,every spec. listed above) unable to cont. --WAITING FOR REPLY

HT201401 Can I down grade from ios6 as since upgrading phone is slow and unresponsive. This is driving me crazy. This page took ages to load on a wireless connection.

Since upgrading to iso6 phone is slow and unresponsive. Can I reset and down grade? I'm a complete technophobic and have no idea how to do this. Any help would be fab!

There is no legit way at all to downgrade.
Have you tried basics from the manual to help your issue?
Restart, reset, restore

This is driving me crazy, empty addresses

Please help!, sometimes, when i get an email and reply to it, it is marked with an X, when i click on "show address" it is empty, there is no email address. When i go to the address book to make sure i do have an address for this person then the contact is empty too, only the name is displayed.
Any ideas of what can be done about this?

I have never heard of a BB deleting just an address here or there.
Is there anything else you have have noticed odd?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

This is driving me crazy, type question,review,edit, post.THEN

after all that it takes me back to say, YOU havent marked this question as answered/unanswered.
WHY??????
Especially when I carefully have checked the correct box.... usually unanswered. It seems that the message does not appear if it is checked as answered. Is it supposed to remind us. Are we all being treated as children that cannot make a decision.
Grrrrrrrrrrr!!
like other people I am finding this new format definitley unfriendly[
luckily most of the people are!
Thanks for letting me rant but I would like an answer too.

HI Eme, I do not even get the chance to get to the Topic page, as soon as I try to post the question [or usually a reply] it chucks me back to the page and tells me off for not marking it as unanswered/answered. It seems to do this if I dont mark it as answered.
As you say it might be a check BUT it is so Frustrating
to keep getting it thrown back everytime I post a response, more so when there hasn't been anything helpful said anyway.
I liked the old system where we could just go and mark post as helpful when ever... not everytime we post a reply to what may just have been a clarifying question.
This is just what happened
Error Error, posting the message. Please make sure all required fields are entered.
Subject:
Has your question been answered?
Error, please choose whether or not your question has been answered.
Yes, my question has been answered.
No, my question has not been answered yet.
No doubt this will be thrown back to me too.
YES I was rightevcen though I carefully checked that the default was in place.
If they didnt have a default answer then it might make more sense if they throw it back, but they set the default at unanswered. Then tell us we haven't marked it.
What is going on??
WW
Shirley
Imac FP 800Mhz 80gb 256 RAM Mac OS X (10.4.4) 512 extra Ram iLife 04 LaCie 160gb Ext Airport Express 6.1.1
edited after error messsage thrown back at me.

This is driving me crazy - can't find episode!!!

I listened to the first half of the BBC Documentary "Choosing to Die" and accidentally tapped something when I went to finish listening to it. Now I can't find it anywhere. It doesn't come up in the search and I'd have to go through all 300 titles to find it. This is seriously frustrating the **** out of me.

If you have your iPad connected to the charger it could be the new "Hey Siri" feature that allows you to use Siri without pressing the home button. Do you have a radio on or are people talking ? Go to settings> general> Siri> Allow"Hey Siri"> off.

Oh my gosh this is driving me crazy.

Similar Messages

Maybe you are looking for