Oh no. nano not working. please help!
i hadnt used it in a few days and when i got it, it wouldnt turn on. i quickly got scared and used the five Rs. still nothing. all i see on the screen is what seems to be an ipod Diagnostics menu, so it says. plus it is very very faint. you have to look really hard to see it. my computer and itunes are not responding to it. can you please help me?
Does the battery have a full charge?
Try these.
My iPod won't turn on.
iPod battery doesn't charge.
Similar Messages
-
NEW IPOD NANO NOT WORKING, PLEASE HELP
Hi Guys,
I have the large IPOD (4 YEARS OLD) and bought a 2nd Ipod Nano that's smaller for the gym. I plugged it into my MAC BOOK PRO and it keeps saying it needs to be updated which I press "OK" and then it asks for my password and when I type it in, it keeps stating it's "incorrect"? What should I do, any help would be greatly appreciated!
ThanksVegas Superstar wrote:
My plan was to fresh install OSX, install Carbon Copy Cloner and then clone the old drive by plugging it in with a reading device I have.
Hi VS,
What "reading device" are you using?
As it started the macbook told me I was '+running on battery power+' and '+was I sure?+'. With full battery I said yes and continued.
It is best to have the power adapter connected when running a long process like this which cannot be interrupted.
The new internal drive was also making a repetitive noise - not loud or anything but certainly sounded like it was searching for something. As the whole thing was stuck and nothing was working I held down the power button.
How long was it "stuck?"
I tried again with the first disc but it wont even do anything anymore! I took out the new drive and put in the old one. Booted up. Connected the new drive to the reader with the idea of re-formatting it via disc utility.
But now the brand new drive is not readable and is making the a few funny repetitive noises.
Please help me someone - I'm very worried about this new drive now!!! Is is broken or corrupted or something???
It sounds like there is something amiss with the new HD. If you have access to a different external enclosure, (even on a PC, just to see if the HD will function), you could try erasing/formatting it again. If not, I think it's time to contact the vendor about a return. -
my iphone 4s does not start by power switch, it starts when i connect to pc. the proximity sensor is not working. please help.
Sounds like it may be a hardware issue.
Please contact Apple Support in your country.
Here is a list of numbers: http://support.apple.com/kb/HE57
Regards
J -
I have unabled 5 fingure gesture now not able to perform any task,also my power button is not working,please help me in removing this gesture,using I phone 4
I have unabled 5 fingure gesture now not able to perform any task,also my power button is not working,please help me in removing this gesture,using I phone 4
-
I have 4s iPhone , I download the iOS 7. Now the front receiver microphone is not working , please help me that how to fix the problem.
I live in South Africa, and I had the same problem with my iPhone 4.
After weeks of frustration and swearing, I was in the process of restoring my phone to a previous iOS. To do that you need to turn the "Find my iPhone" option off, since i turned it off, my problem was solved. No need to repair anything or revert back to old iOS.
***** that i cant use Find my iPhone, but atleast i can use my phone. -
I installed windows 7 on my macbook pro. all is working but lan adaptor and sound od laptop is not working. please help me or send the link where i can download the these drivers.I have lost my resource cd .
If you are running Lion or Mountain Lion, the drivers are downloaded from within Bootcamp Assistant. If you are running Snow Leopard the drivers are on your Snow Leopard install disk.
Read the Bootcamp Install Guide for your version of OSx. http://www.apple.com/support/bootcamp/
Bootcamp questions should be asked in the Bootcamp forum where the Bootcamp gurus hang out https://discussions.apple.com/community/windows_software/boot_camp -
this is what my iphone 4 shows. iv tried switching off again and again, closing apps by double tapping the home button but still not working. please help.
is there any other method to download ios 6.1.2.
my phone is not being recognized by itunes on my new windows 8. neither its working on touch copy.
kindly help.
thankswell in thatcase, i need another help .
thanks for your instant reply.
i have currently bought a new laptop (windows 8) and my iphone is not being recognized by itunes.
because i have no backup on my previous laptop, i downloaded touchcopy but even touch copy is not recognizing my iphone. -
while updating 4.0 version to 5 version system shows sim card is not valid. My iphone is not working .Please help me
I would imagine your iPhone was hacked to make it work on your local carrier.
Updating the iOs to 5.xx will lock it back to the original carrier .The carrier holding the lock are the only
entity able to authorise the unlock .You will have to contact them and see if they unlock and the terms the apply -
HT1414 my handsfree is not working please help me
Hi There!
I am using Iphone 4s and ny handsfree in not working please help meTry restarting you iPhone by holding down the on/off and the home buttons at the same time until you see the Apple logo.
-
I have ne iphone 5, i been setting my email using AT&T global but it is not working, please help me on the correct configuration
Contact the email provider and obtain the correct setup information.
-
The built-in mic in g50 122ca laptop model is not working. please help me out.
the built-in mic in g50 122ca laptop model is not working. please help me out. OS: Windows Vista (32-bit)
here is a sample code .
so far you procedure looks good but
i bet you have to specify the name of report , instead of 'filename'.
see this
Plist_id := GET_PARAMETER_LIST('P_name');
IF NOT ID_NULL(Plist_id) THEN
DESTROY_PARAMETER_LIST(Plist_id);
END IF;
Plist_id := CREATE_PARAMETER_LIST('P_name');
ADD_PARAMETER( Plist_id, 'P_Receive_date', TEXT_PARAMETER, TO_CHAR(Receive_date,'mm/dd/yyyy'));
ADD_PARAMETER( Plist_id, 'P_Hearing_date', TEXT_PARAMETER, TO_CHAR(Hearing_date,'mm/dd/yyyy'));
ADD_PARAMETER( Plist_id, 'P_Hearing_time', TEXT_PARAMETER, TO_CHAR(Hearing_time,'mm/dd/yyyy'));
ADD_PARAMETER( Plist_id, 'P_Issue_date', TEXT_PARAMETER, TO_CHAR(Issue_date,'mm/dd/yyyy'));
ADD_PARAMETER( Plist_id, 'P_Workshop_date', TEXT_PARAMETER, TO_CHAR(Workshop_date,'mm/dd/yyyy'));
-- RUN_PRODCT(REPORTS,'..\Reports\Pro_License',SYNCHRONOUS, RUNTIME, FILESYSTEM, Plist_id, NULL);
-- here Pro_License is the name of report.
did you tried to see if the parameter passed using a message ?
try
message('parameter name'); pause; write this before "run_report". -
my itnues for pc is not working it shows that iTunes has stop working,I have downloaded Itnues many times but still it is not working, please help me
Please helppppp
-
All my old tv shows are not working please help my computer sed I have to Atheris 5 computers to play all my old tv shows I Pade for with eney Itunas cards.
What do y mean by not work?
What happens when y try to play them on yur iPod?
What happens when yo try to play them in iTunes on yur computer?
If you get a message what is the exact wording of the message?
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Some countries do not allow redownloads some kinds of media -
The click at touchpad is not working, please help!!!
I use Macpro, recently the click at touchpad is not working, please help!!! Thank you !!
For this issue AppleCare support told me to so a SMC reset as follows:
Power the machine OFF.
At the SAME TIME hold down the following buttons:
Shift
Control
Option
Power
Then release all buttons. Power up the Macbook and see if the trackpad button work.
Hope this helps.
Bill -
hi
i tried to update to ios 8.2 on my iphone 5s when message popup to me now my iphone not working, please help i dont want to lose my dataWhat is the exact text of the message you got? And did you not back up before you updated?
Maybe you are looking for
-
Not able to create sales order using BAPI - BAPI_SALESORDER_CREATEFROMDAT2
Hi Experts, I am not able to create sales order . I am using BAPI - BAPI_SALESORDER_CREATEFROMDAT2 to create sales order .I am passing external sales order number to the parameter SALESDOCUMENTIN. I am getting following error. "524 |Only quantity 1
-
I'm currently running Lion OSX, and I've already tried repairing the disk multiple times. At this point I really just want to rescue as much of my files as possible. Thanks!
-
Problem with table in Adobe Form in Web Dynpro JAVA??
Hello all, I have an issue with the table displaying all the node values in the Adove Form. Right now it displays only the first element of the Node even if there are multiple entries. Not sure what is going wrong here. How is the table created in a
-
I am trying to use my album page on iweb, but i cannot add a picture. do i have to use mobile me to use that? i tried everything, dragging photos to the album area, using iphoto, toolbox, but any of them didn't succeed. Is there someone know why it i
-
I have an IPod 4 and when I try to update my IPod it says make sure your network settings are correct and your network connection is active. How do I make it update?