Oh no! Note selection in Piano Roll also selects cc data?

Just discovered this in the 10.0.05 update: If you select a note in the Piano Roll edit window Logic will also select any cc data the occurs during that note (or notes). I have never seen this behavior before, and I can find no way to turn it off !!!
Anyone know how to disable this?
SHM

shmorrell wrote:
Tried that. No joy...
However, your suggestion does work in 10.0.04. Somehow they made it so that option is always on in 10.0.05.
If this is confirmed it points to the fact that Logic would do well to have a beta test team of actual users instead of just in house testing... Can anyone confirm this behavior?

Similar Messages

Weird note display in piano roll

All they notes in the piano roll display have suddenly acquired blocks of colour and a keyboard has appeared on the right hand side with enormous keys. The blocks of colour seem far apart, not at all like the notes that were there before this weird thing happened. I've undone a dozen times but it seems this isn't something I can undo. I can find nowhere to change this and I can find no mention of it in Logic HELP. Can somebody set me straight please?

Yes, sereen, you're right on the money. I was zoomed in until I could see the atoms that made up the notes. The display was so bizarre - each note was contained in a green box with a yellowish edge. Having never seen anything like it I panicked. Thanks for your help.

"Print report REKORD 80 has not selected any data for correspondence SAP18"

When executed FBCJ transaction click the "print cash journal" button then appears the following message "Print report REKORD 80 has not selected any data for correspondence SAP18"
What is the procedure for to fix error?
Best regards
John

HI,
John.
please refer the following link.
correspondence type
Regards,
satish

HR Form do not select any data from specific Period

Hi All
I am facing issues on the HR FORMS for Brazil related to the Remunaration Statement
When I try to select any employee from a specific period (before April 2012), the system does not select any data.
From April 2012 until the current period and I could select the data and print the Form
I do not believe that is related to the Master data from the Employee, since it is always related to the same period, I guess it is on the HR Form configuration, retricting the period anywhere, but I could not find it
do you know any idea on how to fix it ?
Regards

Hi Steve,
In SQL Server Analysis Services, we can hide or disable hierarchy level by using
AttributeHierarchyEnabled property, however, when this property is set to false, this level will not appear no matter if contain data or not. In your scenario, you want to hide the hierarchy level dynamically, right? As Aleksandr
said, I am afraid there is no such a method to achieve it.
If you have any concern about this behavior, you can submit a feedback at
http://connect.microsoft.com/SQLServer/Feedback and hope it is resolved in the next release of service pack or product. Your feedback enables Microsoft to make software and services the best that they can be, Microsoft might consider to add this feature
in the following release after official confirmation.
Regards,
Charlie Liao
If you have any feedback on our support, please click
here.
Charlie Liao
TechNet Community Support

Fixed note length in piano roll

Hello ,is there any way to draw notes with a fixed length in the piano roll rather than using the last edited note's length?
In other words,i want the default note length not to automatically change every time i draw/edit a new note (with a different length).
Im quite sure this cannot be done, but i thought i should ask to confirm...
I also feel i want to say my opinion on that,you dont have to read it or answer back to it:
I find this way of editing very confusing and counter creative ,it sure adds extra thinking proccess.While you are drawing notes it
constantly keeps your mind away from your melody line since in every step, you have to stop some milliseconds and think
"which side should i drag to resize now given the new facts left or right?"....
And extra (unnecessary) thinking always acts against creativity.
I think it seems very logical the way i said that and that objectively, irrelevant to any personal preferences, this way of editing
,even if i doesnt annoy everyone ,it is indeed counter creative.
Especcially if one really does a lot of editing rather than recording.
I wish there was an option for that in the preferences, maybe something very simple like a checkbox "Automaticaly define default note" to uncheck.
Im sure it would be only a few hours of programming for the developers to do something like that, but it would be such a saver for people
who edit a lot or for people coming from other DAWS, or for anyone that simply cant get used to it because they feel it anti-intuitive / unatural...
There...i shared my thoughts, at least i feel a better know...!
(However if you read my opinion i d like to hear what other people (that do a lot of editing) feel )

You can use the transform tool but it's "after the fact". Simply rubberband a group of notes to be changed and use the Transform tool under the piano roll's "function" menu. Choose "Fixed Note Length" then set the parameter box to the value you need.
There's also this workaround: Find a note of the correct length already in the sequence or create temporary notes of the correct length. I'm assuming by "draw" you mean using the pencil tool. Move the pencil over the *center of note with the length you need, left mouse click and hold for a second, until the pencil turns into a hand, you will now have the length set for drawing new notes. The pencil tool is still selected so you don't have any additional selections to make.
Yes, it's a hassle, but once you get used to it you will find it's faster than what you've been doing.
*slight correction: when moving the pencil tool over the *center of a note, it will change into the pointer arrow, left click and hold and it will change into the hand, move the pointer away and it goes back to the pencil.

Separate midi drum channels not showing in piano roll, only kick

hey ya'll! I separated my midi drum notes on to separate mudi tracks. But now only the kick track shows up in the piano roll window.
I am using AD and need to be able to edit the drum midi tracks. I use the piano roll window for this. Can someone help me?
Jon

You can select multiple regions in the arrange window and they will all show up in the piano roll. If you color each drum region a different color and select "region colors" in the piano roll view menu you can easily tell which regions are whoch.

How to enable note names in piano roll in Logic Pro X?

Hello,
I am trying to understand how to enable the note names in the piano roll editor, according to some posts it should works creating a mapped instrument, I follow up each step but for me this solution does not work.
Basically I have created a software instrument with Drum Kit and I would like to see the names of each component of the drum when I am editing(for example snare, kick, toms HH etc), currently I only can see values as C4, C3, C2 etc
I appreciate your help, thanks in advanced.

Well it is a shame because the "Piano Roll" is a good and quickly tool for edit drums and midi software. I have used Cubase, ProTools, Reaper and they have notes names options available, I do not understand why Apple did not think in that option as well.
By the way today I have practiced with "Step Editor" option, it is interesting option but it is not better than edit with "Piano Roll".
I hope that Apple think in this little option but great tool for the next release.
Thanks Ericksimon.
PD: If anyone have another idea to edit drums quickly with Logic Pro X I appreciate the recommendation.

How can I edit note events in Piano Roll?

Hi, I am still using 9.1.8 and in the Piano Roll the rectangles representing note events have a line inside the rectangle and I was hoping to use the event list to get that line to extend the audible length of some long notes.
But changing the length values in the event list seems to lengthen the note not the audible portion which I think is represemted by the line inside the rectangle.Is that true?
Is there a way to get the audible sound to keep playing until the end of the visible note event?

Thanks you both ErikSimon and Pancenter. The velocity can be lengthened ,Erik, by what you describe but to the line in the Piano Roll when adjusted in the event list will only lengthen the note. Sorry,hoor you are right but velocity isn't the problem-sustain length is.
Pancenter hit the nail on the head. The sample libraries are put together appently by developers who have some strange ideas about what orchestral intruments can do in the right hands. I have played Baroque Bassoon here in Europe for 20 years and have sat next to classical flute players who can easily hold a note for the length I need. And it is no problem for them to hit it exactly in tune, but we played in tune=meantone, not everything out of tune=Equal Temperament.
Somehow the false assupmtion that all classically trained musicians are incapale of hittng and sustaining a note in tune at the exact moment needed has becom an accepted belief. This is NOT true, the sound of E.W.Q.L. products is the Romantic 101 mantovani string culture which owes more to hollywood films than to reality.
I now see that all I have to do is replace the whole note with two half notes,the second one muted ,and it should play as I want.
Again thank you both for your brave an wise help.

Notes disappear in Piano Roll and Hyper editor

When recording with either the piano roll editor or the hyper editor windows open the notes disappear and then reappear when recording is stopped....does anyone know how to turn this off? so annoying. thanks.

Pancenter wrote:
christianobermaier wrote:
Uncheck the Link button of the Piano Roll.
Christian
The only version(s) that showed both previously recorded notes and new ones as they were played was the last few PC versions of Logic.
pancenter-
I wonder why they did away with that...it's very helpful to be able to see that....

Can not select from data dictionary view from a procedure

Hi,
I wonder, which privilege is missing here:
my schema has this roles and privs:
GRANT CONNECT, RESOURCE TO cb ;
GRANT CREATE SESSION TO cb ;
GRANT SELECT_CATALOG_ROLE TO cb ;
GRANT CREATE SYNONYM TO CB;
GRANT CREATE VIEW TO CB;
I create a procedure:
create or replace procedure dd_test as
begin
     dbms_output.enable(2000000);
     for r in (select table_name from sys.dba_tab_partitions     where owner = 'CB') loop
               dbms_output.put_line(r.table_name);
     end loop;
end;
sho err
4/38 PL/SQL: ORA-00942: table or view does not exist
When I run the core statement form sql prompt, it works !
so what privilege is missing here ???
thanks for any hint, Lao De

Hi,
thanks for that reply, after doing that I can not select this DD-view from sql-prompt anymore (which I don't wonder ;-). Can you tell me, what idea you had behind that test ?
I found another instance, where the procedure works and I will compare those privileges, but it's hard to sort out that complex structure of nested roles and sys_privs.
How ever, I will update here, when I found the missing privilege.
regards LaoDe

Paramater Criteria not selecting correct data

Why oh why would disco do this
I have a field configured in the EUL to a format mask of "Mon" it shows a truncated date field with Jan, Feb, Mar etc... When I put selection criteria on the field to only display JAN it brings back the columns with Jan but also any columns with no value in????? Why would it do this and how do I get around it? Tried doing decodes and stuff for blank fields but it does not work???
help
Keith

Hi Michael,
Thanks
The relationships for the delivery details folder are as follows:
Delivery Details -> Batch Picking Information (No Outer Join)
Deliveyr Details -> Delivery Assignments (No Outer Join)
Delivery Details -> Freight Costs (No Outer Join)
Order Lines - > Delivery Details (Outer join on detail folder)
-> = 1:M
I am taking the truncated date from the delivery details folder, "left" depends on how your orientated to relational design, is this what you mean?
The Apps EUL is based on the app BIS views so yes all these folders are based on views.
Keith
Message was edited by:
turtle2007

Selection formula not selecting by dates

I'm having an odd problem with my report. I'm trying to filter by the start date of a job. The DB I'm pulling from stores it as a string, YYYMMDD (e.g. today is 20090713). In most of my reports it works just fine, but in this one it seems that it's ignoring the filter altogether.
My original selection formula was:
{JobMaster.StartDate} IN {?FromDate} to {?ToDate}
In an effort to 'fix' it, I changed it to:
DateSerial(ToNumber(Mid({JobMaster.StartDate},1,4)),ToNumber(Mid({JobMaster.StartDate},5,2)),ToNumber(Mid({JobMaster.StartDate},7,2))) >= DateSerial(ToNumber(Mid({?FromDate},1,4)),ToNumber(Mid({?FromDate},5,2)),ToNumber(Mid({?FromDate},7,2)))
AND
DateSerial(ToNumber(Mid({JobMaster.StartDate},1,4)),ToNumber(Mid({JobMaster.StartDate},5,2)),ToNumber(Mid({JobMaster.StartDate},7,2)))
<= DateSerial(ToNumber(Mid({?ToDate},1,4)),ToNumber(Mid({?ToDate},5,2)),ToNumber(Mid({?ToDate},7,2)))
I noticed that it even grabs jobs July, even if I pass the FromDate as 20080601 and ToDate as 20090601. The startdate I'm dealing with is 20090702.
Any ideas? Thanks in advance.

Hi Lain,
Do the following :
Create single Date parameter and in options allow range values true. Now in your record selection you gie = {?Date}
Thanks,
Sastry

Paste notes in Piano Roll changes Region size

Hi,
When I copy/paste a note in the piano roll, using cmd+C, cmd+V, it also changes the Region size. Which is not convenient at all.
When I do it with alt+mouse, it works perfectly fine. But I work mainly with keyboard commands.
Also, sometimes it even creates a new region on its own.
I am on LogicPro X 10.0.1, OS X 10.8.4, iMac 2.5 Ghz, 16 Gb RAM.
I saw similar questions already, but no answer yet.
Thank you by advance

You shouldn't have an issue...doing what you are doing.. and I cannot recreate it here..
But an alternative would be to simply copy the Region itself in the Arrange window....
Hold Down the Option key and drag region using mouse or trackpad....

Transposing in Piano Roll with the Function

I have a tune that's 2 midi tracks (green), piano and sax.
I just want to transpose them without having to do it manually ,( selecting all the nots and nudging them up). I don't like doing that with a thousand notes.
Don't you just hate it when all your creative juice gets frazzeled because you can't do something that is incredibly easy with Garage Band but you can't figure it out with Logic?
I have spent at least a couple hours with the manual online and the book so as not to be scolded with RTFM.
This is Logic 8 . I can't find the manual for it online and maybe it matters ??
I think it can be done GB style from the Piano Roll> functions>Transform>transposition.
But for the life of me I can't find how to do it anywhere and it's not obvious from the dialog box

musicspirit wrote:
tbirdparis wrote:
You can { I assume you mean CAN} just select the midi regions in the arrange window and then adjust the transposition to whatever you want using the transpose setting in the inspector? It takes like 0.2 of a second, I just timed myself.
I dont think this is correct - I never use the transpose setting in the inspector because it transposes the Score. I just tried your suggestion by going +2 and indeed an Eb part goes up to F... but this is the effect where Logic's Score Editor plays back the part in concert but shows a transposed part for printing ( as in transposing instruments - also the notes in the Piano Roll dont transpose)
@Bobsax try this ( I know you hate nudging the notes but once familiar with these steps it will not interrupt your creative flow):
1 - Open Key Commands. Type in: '*Transpose Event +1*' and '*Transpose Event -1*' and find out what the key commands are or program them ( I use simple the + and - signs on the numeric pad)
2 - Go back to the Arrange window and select both regions
3 - Open the Piano Roll on a separate screen set and zoom out so that you can check all the notes are highlighted - usually Screenset 6 by default. ( Dont do it in the Arrange as there is not usually enough space)
4 - With both regions selected, press + key (or minus if you are transposing down). Count carefully as many Semi Tones or Half Steps up or down you want to go. You will hear the midi notes sound as they go up or down
5 - If you make a mistake there is always UNDO or REVERT to SAVED
This operation takes me less then 5 seconds
HTH
Music Spirit
Thank You MusicSpirit
This did the trick.
Sorry I didn't have any stars left for you TBirdParis:(
I'll get you next time
Message was edited by: Bobsax
Message was edited by: Bobsax

Why do the piano roll and event editor act differently?

In Logic Studio 9, this wasn't the case, but there are numerous examples now where editing MIDI in the event view acts right, and editing the same MIDI content in the piano roll acts wrong. It's extremely frustrating! Personally, I think who ever modified the behavior of the Piano Roll in Logic 10 should be fired on the spot. I'd downgrade to 9 in a heartbeat if it was still available in the App Store.
Two examples off the top of my head:
- Selecting a MIDI note in the event viewer selects ONLY the note and not all the MIDI objects that fall within the time span of that note. This is not the case in the piano roll as it assumes that when you select a note, you want *more* than just the note you're clicking on. This is a stupid assumption and is new in 10.
- Dragging midi notes in the piano roll randomly deletes all non-note events and changes the action from "move" to "copy" where the only workaround when the piano roll gets stuck in this state is to do the same action in the event viewer.
Please rollback changes made to the piano roll in 10 back to what 9 was as I've wasted countless hours of my life trying to work around these flubs!

Try making a blank project with no settings at all and just add a bass from whatever plugin. Make sure there are no plugins at all on the track (not just muted but removed). Then try again.
I believe palying on the pianoroll with the mouse plays at 127 velocity but I ain´t sure. How about the output? Does it clip/go red? Then it will disort.

Oh no! Note selection in Piano Roll also selects cc data?

Similar Messages

Maybe you are looking for