OHD Strcuture change Issue

Hi All,
I am not able to change the structure of the OHD- TAB Database table type. OHD is not going into change mode. when I check object changeability options it says: its changeable but i revert it to non changeable and then again changeable after that i go into the change mode but when i change the fields and activate the structure it activates but after i log on again to system changes are not reflected.
also, after logging on let say i see the structure of one OHD not after that if i see the structure of another OHD it shows me structure of the first OHD i opened again n again for all OHDs opened until i again logoff and after logging in again same issue.
Is there any SAP note that would be helpful for this issue.
thanks
nikunj

"You can create a new column with the name you want. Then loads it with the ID field using a workflow or an event. Do not load through calculated fields, because it does not works well."
Please check this thread
https://social.msdn.microsoft.com/Forums/sharepoint/en-US/365cfb8c-fa77-423b-b352-9799a5099eaf/how-can-you-change-issue-id-column-in-sharepoint-issue-list?forum=sharepointadminlegacy
My Blog- http://www.sharepoint-journey.com|
If a post answers your question, please click Mark As Answer on that post and Vote as Helpful

Similar Messages

I think I solved my time changing issues- hope this helps

Hey everyone, I think I've had some success with my time changing issues. I originally posted this to another user as a follow up to her question, but I'm reposting it here. Hope it helps:
"msteinny,
So i went to the apple store to meet with an apple genius to ask him why my phone's time kept moving up 1 hour everytime I synced my phone. Well he said that he's never seen this problem before, and after a trying a reset and restore he let me exchange my phone. The problem is that when I went to sync my new phone the problem still persisted. They told me it was probably something to do with my computer and its time zone settings.
So I get home and click on my computers clock in the bottom right hand corner to bring up the date and time properties and sure enought my time is correct, the date is correct and the time zone is correct (Eastern Daylight Time). So I look through the different tabs (Date & Time, Time Zone, Internet Time). The first thing I tried to do was to change where my computer syncs its internet time. It was originaly set on NIST time. I then switched it to Windows time, but this didn't do anything. My clock would still change when I synced to itunes. The next thing I tried was fideling around in the Time Zone tabs. I noticed that the box that says "Automatically adjust clock for daylight savings" was unchecked, so I checked it and my computer's time jumped an hour ahead. So I left the box checked but moved my clock one hour back (to the correct time), clicked on apply and left it at that. I synced my iPhone and voila! The time didn't change! It stayed on the correct time! To to make a long story short, make sure that you computer's clock is set on "automatically adjust clock for daylight savings changes, make sure your time zone is correct, and that the time is right when that box is checked. I hope this helps you. I'm glad I got a new phone out of the deal;)
Chris P. "

As I mentioned in my post, whenever I checked that box the time would be incorrect. It would move up an hour. I've messed with this along time ago, way before I got my iphone. I think this had something to do with the daylight savings change that was implemented this year or last year. I dont remember if I never tried correcting it before, or if I couldn't, but this time I didn't have any problems correcting it. Anyway, since I couldn't correct it back then, I just left the box uncheck and decided that I would change the time manually when the next time change occurs. But it seems to work fine now so all is well.

Why some items can not change issue method in Production Order?

Hi,
I have a Production Order which had been released.
As some reason, I need to change issue method on some items in this Production Order, but I found that some items can be changed with a dropdown list, and some items can not be changed without dropdown list.
Why they are different?
What should I do to meet my users' request?
Thanks.

Hai wilson,
sorry i visits forum after long time .. item category means , when create item group there are two option Service / Material if u select service , inventory come under that group only in "Back flush" other wise u can select "Manual / Back flush"
Regards
Janeesh

Vendor Reconciliation Account change issue

Hi,
I need to change the vendor reconciliation account.
for that i created another reconcliation account and assigned in master records.
After that i created adjustment account.
After that i assigned this adjustment account for old and new reconcliation accounts.
When i ran the FAGLF101, job successfully ended.
But no amount was transferred from old recon account to new recon account.
Please guide me on above issue.
Sateesh

Kedar,
Thank you very much for your reply.
I done the changes said by you and got the entries in new adj. and old. adjust accounts.
Here i have a few questions.
1) While doing balance sheet preparation shall i have to use the old recon. along with new recon. account?
2) What is the actual use of adjustment account
3) We are using ECC 6.0, after running of FAGLF101, does we need to run any transaction for balance sheet updates.
Thanks in advance
sateesh

Report Builder 2.0 User Password Change Issue

A user changed her password (domain account) this morning and can no longer open the query designer (we are using an SSAS data source) or run a report in Report Builder 2.0. She can still access the SSRS front end report manager reports with no issue (and she enters her new password).
When clicking Run for a report in the Report Builder 2.0 the following error message displays:
The request failed with HTTP status 401: Unauthorized.
When trying to open the Query Builder for a dataset in the Report Builder 2.0 the following error message displays:
An existing connection was forcibly closed by the remote host
Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host.
A connection cannot be made. Ensure that the server is running.
The security log in the applicaiton event log on the report server logs the following with each failed attempt:
Unknown user name or bad password.
Three other users have recently reset their passwords and had no issue with Report Builder 2.0. I am thinking that her password may be cached or saved within Report Builder 2.0 and it keeps using her old password. I have had the user reboot and uninstall/reinstall Report Builder 2.0 but neither fixed the issue. It appears after uninstalling that all application data was not removed as recent reports show after reinstalling and I was not prompted for login credentials again. I had our domain admin reset her password back to what it was before she changed her password and all issues in Report Builder 2.0 went away and she could use the Query Builder and run the reports. I need to figure out how to let her change her password and have Report Builder 2.0 work though. Any help is greatly appreciated.

Sorry, going to Options > Settings and clicking "Clear all recent item lists" didn't work for me. My login credentials are still cached, and I'm not prompted to log in, when I launch Report Builder.
I'm running Win7 Professional, IE10. I cleared my browser cache as my first attempt to clear the login, but that didn't work. I even cleared again, making sure to select to clear stored passwords/logins, but that didn't clear it, either.
Best regards,
Brad

BPC 7.5NW Username Change Issue

I've been having a weird issue when a user has a name change. As an example, I have an initial user (DOMAIN\clwho) that has access to BPC and everything is working fine. She gets married and changes her user ID (DOMAIN\cwdoe) in active directory and requests that her new ID has the same access in BPC as the old one. If we add the new credentials to BPC and assign it all the same rights and stop there then everything is fine. However, if we delete the old username (DOMAIN\clwho) then she can no longer log in. The message we get is that DOMAIN\clwho doesn't have permission even though we're attempting to log in with DOMAIN\cwdoe.
Any idea why this is happening? I thought there would be something in active directory causing it, but the guys who manage that tell me that they don't see anything mapping DOMAIN\cwdoe to DOMAIN\clwho. I'd like to be able to just add DOMAIN\clwho back into BPC, but that ID no longer exists in AD.

Vadim,
I did try to remove everything for that user from the Admin Console and then just recreate the access for the new user id, but it still doesn't work. Do you know which table references the SID and User ID? I tried to find something in all of the UJE_* tables, but no luck.
Thanks,
Jimmy

Password change issue when logging on to Portal NW2004s SP6

Hello,
We have a NW2004s SP6 installation. We have the user management in the ABAP stack.
We create new users is created in the ABAP stack.
When the user logs on using the Portal, the change old password screen keeps repeating itself. This is however not the case once the user has logged on to the ABAP server and changed his password.
So, I looked in the logs. The log is full of the message.
Error#1#/System/Database/sql/connect#Java#com.sap.sql_0019##Exception of type com.sap.sql.log.OpenSQLException caught: Error while accessing secure store: File "\\labnxi\sapmnt\NXD\SYS\global\security\data\SecStore.properties" does not exist although it should...
[EXCEPTION]
{2}#3#com.sap.sql.log.OpenSQLException#Error while accessing secure store: File "\\labnxi\sapmnt\NXD\SYS\global\security\data\SecStore.properties" does not exist although it should..#com.sap.sql.log.OpenSQLException: Error while accessing secure store: File "\\labnxi\sapmnt\NXD\SYS\global\security\data\SecStore.properties" does not exist although it should..
     at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:106)
     at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:145)
     at com.sap.sql.connect.OpenSQLDataSourceImpl.setDataSourceName(OpenSQLDataSourceImpl.java:226)
     at com.sap.sql.connect.OpenSQLDataSourceImpl.setDataSourceName(OpenSQLDataSourceImpl.java:197)
     at com.sap.engine.services.dbpool.spi.ManagedConnectionFactoryImpl.createManagedConnection(ManagedConnectionFactoryImpl.java:112)
     at com.sap.engine.services.connector.jca.ConnectionHashSet.match(ConnectionHashSet.java:320)
     at com.sap.engine.services.connector.jca.ConnectionManagerImpl.allocateConnection(ConnectionManagerImpl.java:186)
     at com.sap.engine.services.dbpool.cci.ConnectionFactoryImpl.getConnection(ConnectionFactoryImpl.java:51)
     at com.sap.caf.eu.gp.base.db.ConnectionPoolJ2EE.getConnection(ConnectionPoolJ2EE.java:89)
     at com.sap.caf.eu.gp.schedule.impl.ScheduleDbImpl.getScheduleToProcess(ScheduleDbImpl.java:2026)
     at com.sap.caf.eu.gp.schedule.impl.ScheduleService.getScheduleToProcess(ScheduleService.java:373)
I looked in the server and the SecStore.properties is there in the directory
usr\sap\NXD\SYS\global\security\data.
If anybody could shed some light onto this issue that would be much appreciated.
Best Wishes.
Sumit.

Hi,
on the server where your portal runs you have a user calles <SID>adm, where <SID> stands for the three-letter name of your system.
This user needs read/write rights on the SecStore files...
Hth,
Michael

Service Master / Activity Master description change Issue

Dear Experts,
I am facing problem with Service master / Activity Master description change problem.
Steps in the problem -
1) Service Master / Activity Master created.
2) Long term purchase order (with large quantity) is created.
3) Service entry sheet and Invoice has been posted for the Purchase Order.
Due Service master / Activity master description change requirement from client, description of the
Services are changed.
But it is not updated in Purchase order. (As purchase order has been created before service master description change)
and when i am trying to post next service entry sheet with reference to the long term purchase order created,
it is not adopting the new one service description.
Thanks in Advance

Hi Kiran
The solution to your issue could be achieved as follows:
In the item level 'Service' tab for the corresponding PO line item, change the quantity to which you have already made Service Entry sheet. Then create a new line item with the Service number, once you enter the Service number you would see the new description here. Then when you create a Service Entry sheet with reference to PO, the system would ask you to select one of the two entries you have in PO. Here select the new entry which you have made.
Thanks
Prashanth

Item category change issue

Hi,
We have implemented scenario A settings for return orders to exchange and edit in both ECC and CRM systems. We are having a scenario where item category for an item in return order will be changed to the other in ECC system. In our case we have the status profile assigned to the item category which was initial and we dont have any status profile for the item category which is changed to in both ECC and CRM systems. We are gtting errors in CRM and the document is locked when the item category is changed in ECC and saved. The error is 'The status procedure could not be set from item category XXX'. Can you please suggest how can we fix this issue?
Thanks,
Rajinikanth. G

Hi Rajinikanth,
Were you ablo to solve the issue? I too am facing a similar situation. Can I kindly request you to share your solution with me?
Kind regards,
VSK.

Posting Changes Issue

Dear All,
What are the settings required regarding Posting Changes in WM when I do a transfer posting using Mov.type 309 & 311 in IM inorder to generate Posting changes in WM ?
Regards,

Hi Vineet,
Thanks a lot for the response.
Actually I am new to WM & now configuring WM in my test server.
I have already made all the settings which you have mentioned above. The issue is when I do a transfer posting using 309 or 311 I am getting the following error
' Storage type 002 not suitable as an interface (SU management is active) '
For the WM mov type - 309 I tried by assiging the source storage as 002 & bin as well as with 002 only.
I have mentioned the destination storage type as 922 with dynamic indiactor as D storage bin.
Note : When I didnt assign any source storage type in my mov.type 309 then I am getting the error 'storage bin 001 (warehouse no) doesnt exist check your entry'
I.e system is not determing the source storage type using the storage search table.
Hope its clear.
Please advise where I am goin wrong & how to solve this issue.
Regards,

OHD description change in other language limited to few characters

I created a OHD , given description in Englis logon language
But the description of my OHD is not displayed when i logged in NL ( Dutch language ). So i tried to maintain the same english texts in Dutch ( as per the requirement ).
Next to the technical name there is a option to change the description ,
When i use that, it cant hold the entire text content which is maintained in English. Few characters at the end are truncated and the system does not allow to include extra characters also.
For example Open hub destination description in :
English logon : Attributes of XXX Selection table
Dutch logon : Attributes of ASP Selection ta
In the above text the last 3 ble characters is not seen in the Dutch logon
Is there any way to have entire texts in the OHD description as maintained in english language. Why there is a restriction when try to change the description ? Kindly write your suggestions

Hi,
normally you can do translation with rsa1->goto->translation.
kind regards
Siggi
PS: For more information you can also look here:
Translation Tab under RSA1
Message was edited by:
Siegfried Szameitat

PO item change issue

Hi all,
We went live on SAP last month. We are facing below issue in production -
IDOC is not getting triggered for output type when a PO is changed. we want to replicate the same issue in development system.
When I looked into production PO changes, I found that PO item is changed for ' Purchasing Document Item Change Date'.
When I see the item changes, it shows:
short text - Purchasing Document Item Change Date
Action - changed,
new value - 11/05/2010 (this is the date when PO is changed)
old value - 11/02/2010 (this is the date when PO is created)
Name - XXX_BATCH
Change doc object - EINKBELEG
table name - EKPO
field - AEDAT
Can anybody help me understand what is this change all about? and how can I replicate this issue in development system ?
Regards,
Pat.

please read OSS note 456127 - FAQ: Electronic Data Interchange (EDI) in purchasing

BOM Change Issue

I have material number, component number in my file. I need to change the issuing storage location for each component. I am unable to figure out the way to write a bdc. Shall i use cs02 or cs05. Also if go inside the bom change how do select a component in my BDC??
with regards
MurugeshRajeev

ok,
following previous instruction do the recording in LSMW.
in 4 th step of LSMW i.e. in filed mapping add a validation for Material type where you write a query on MARA to check if material type is 'Whatever you wnat'.Only do transfer_record for transaction which satisfy youir condition , for rest of them do SKIP_TRANSACTION.
let me know if any questions.

Wlc 5508 webauth subnet mask change issue

Recenly l changed the network subnet for a particular wlc interface and scope and also an upstream router and for some reason it would only allow me to use a /24 Host mask as my plan was to go to a /22 mask to allow for over 1000 hosts within this scope.
The Upstream Router which is a ( RV042 ) had the following original config :
     192.168.1.1
     255.255.255.0
I have noticed this device will not let me change the mask from a /24 to a /22 as you can only change from a pre-defined list of masks and you cannot manually add any either..
New Config
     10.10.0.10
     255.255.255.0
WLC 5508 Controller Interface
     Original Config
      192.168.1.25
     255.255.255.0
     192.168.1.1
     New Config
     10.10.0.25
     255.255.252.0
     Scope
     Range : 10.10.1.10 - 10.10.3.254
     Mask : 255.255.252.0
     Network : 10.0.0.0
     Router : 10.10.0.10
When l reconfigure to this addressing the wireless clients connect and get the new dhcp scope details but following this the webauth screen doesn't appear not allowing them to connect meaning there is no routing of traffic / internet access.
If l modify the above interface and scope masks back to a /24 - 255.255.255.0 the the wireless clients connect and webauth appears to prompt them to accept the terms and conditions and connect thus giving them internet access.
It looks like an issue with the mask ? The main reason l am trying to change the subnet addressing is because the standard /24 mask is not providing enough dhcp addresses and we have had times were the scope has been exhausted due to the public connecting and disconnecting as the lease perod of 2 hours holds onto the address before expiring meaning there is not enough available addresses for people to connect.
I would of thought that the upstream router ( RV042 ) even though it is only a /24 mask would still route the traffic coming from a WLC Controller interface with a /22 mask ?
Hopefully someone can suggest a solution ?
Thanks Simon

Hey Scott just getting back to this issue..   If for instance l can modify the wlc interface and Scope to have a /22 mask ( 1022 Hosts ) and my upstream Router ( Cisco RV042 ) can only provide a /24 or higher mask then does that mean l am still limited to a range of 254 hosts ( /24 Mask ) ? Would this mean l need to look into replacing my upstream Cisco RV042 VPN Router ?

Domain Controller password changing issues

Hello!
Having a strange issue where certain users cannot change their password once they expire and it will just prompt that the password does not meet the complexity requirements (when it does).
Also there seems to be a higher than usual amount of call regarding AD account that have become locked.
We have multiple DC's at different main sites, we have a mix of 2003 and 2012 DC's so I'm thinking this could be a Kerberos issues between the 2003 & 2012 ? We are currently in the process of migrating systems off the 2003 and point them at the 2012 but we have a lot and it will take some time.
The event logs don't show anything obviously and also DC DIAG on the 2012 servers comes back as being healthy.
Many Thanks for any suggestions!
This topic first appeared in the Spiceworks Community

Hello!
Having a strange issue where certain users cannot change their password once they expire and it will just prompt that the password does not meet the complexity requirements (when it does).
Also there seems to be a higher than usual amount of call regarding AD account that have become locked.
We have multiple DC's at different main sites, we have a mix of 2003 and 2012 DC's so I'm thinking this could be a Kerberos issues between the 2003 & 2012 ? We are currently in the process of migrating systems off the 2003 and point them at the 2012 but we have a lot and it will take some time.
The event logs don't show anything obviously and also DC DIAG on the 2012 servers comes back as being healthy.
Many Thanks for any suggestions!
This topic first appeared in the Spiceworks Community

OHD Strcuture change Issue

Similar Messages

Maybe you are looking for