OHS for RHEL 5.3

Where does one go about getting the right version of the Oracle HTTP Server for Redhat Enterprise Linux RHEL 5.3? The database version is 11gR1.
The version at http://www.oracle.com/technology/software/products/database/oracle11g/111060_linuxsoft.html is not compatible. The installer says "Checking operating system version: must be redhat-Red Hat Enterprise Linux AS release 3, redhat-Red Hat Enterprise Linux AS release 4, redhat-Red Hat Enterprise Linux ES release 3, redhat-Red Hat Enterprise Linux ES release 4 or SuSE-9"
Thanks

Hi Vikas,
So does this mean that the OHS needs to be installed in its own Oracle_home? Yes you'll definitely want to install into it's own home.
Also, typically I install the OHS using a specific account, i.e I create an 'ohs' account rather than using the Oracle account, this helps to insulate you from any 'whoops I typed the wrong thing' type of errors.
I don't see this library anywhere, any idea where it comes from? It should be available as an RPM on your RHEL disks, alternatively check to see if you have libdb already installed as it may be that you have an older version. In my experience I've often been able to symlink to a more recent version of libdb and have the OHS successfully work (ideally you will want to use the correct lib version, however I can certainly say I've had it work with newer versions which I've just created a symbolic link for).
Hope this helps,
John
Blog: http://jes.blogs.shellprompt.net
Work: http://www.apex-evangelists.com
Author of Pro Application Express: http://tinyurl.com/3gu7cd
REWARDS: Please remember to mark helpful or correct posts on the forum, not just for my answers but for everyone!

Similar Messages

Where can I find oracle 9i download for RHEL 5.6?

Hello all,
do you know where can I find oracle 9i download for RHEL 5.6? I can't find it anywhere.
Thanks in advance.

024c8465-a0ba-4c31-8631-545e52a60961 wrote:
Hello all,
do you know where can I find oracle 9i download for RHEL 5.6? I can't find it anywhere.
Thanks in advance.
My Oracle Support ... and only if you have a paid-up support contract. Actually, I'm not sure 9i would be available even then. 10g is only available to those with a paid-up sustaining support contract. 9i is so old (hasn't been supported in this millennium) I wouldn't be surprised it is not available at any price. Further, I doubt it was ever certified for RHEL 5. Hard to tell since the documentation isn't even available .....
Just out of curiosity, why would you be needing such an antique?
On another note, please edit your profile to give yourself a recognizable name.

Oracle 9.2.0.6 support for RHEL 4 AS update 4

Hi All,
Where can i get information on the support matrix for oracle 9.2.0.6 for Red hat Enterprise Linux 4 Advanced server update 4. The document at http://www.oracle.com/technology/support/metalink/index.html does not give information on the 'update' versions (update 3, update 4 etc). Please advise.
Regards,
Kishore

You must have the minimum update specified by oracle for any OS and as long as you stay on same release, it is supported. Oracle doesn't provide support info at different update levels instead it specify the minimum update which is required for you to have the support.
Check the minimum update requirement for RHEL 4 and if you are on that or above that, you are fine.
Daljit Singh

Download Oracle Forms 3.0 for RHEL 4

Hi,
I want looking to download Oracle From 3.0 for RHEL 4.0... We have a legacy application built on Forms 3.0 character based and database 9i. We dont have the installation media for the same..
Any help would be highly appreciated.
Regards
Kabir

907639 wrote:
We dont have the license for the Oracle Forms 3i... Is there a way we can still open an SR with Oracle with another Database License or License of any other Product from Oracle???Sure.
Have your corporate credit card ready when you begin the process of opening the SR.
Oracle will be happy to take your money for providing the service.
Is there no Archive on the net from where I can download this Media???
No. Old products are gone from public acccess.

ASM Lib files for RHEL-2.6.32-71.el6.x86-64

Guys, We have RHEL 2.6.32-71 kernel on production setup. I need to install Oracle RAC with ASM but i am not finding any supporting ASM Lib RPM for RHEL.
Please let me know whether i should go for Oracle Linux.
Thanks in Advance.
Yuvrajsinh Chauhan

may be you got answer here
Your question answer is here J
http://www.oracle.com/technetwork/server-storage/linux/asmlib/ol6-1709075.html
you have two option for download that rpm
ULN(https://linux.oracle.com/ )
Or
http://public-yum.oracle.com/

ASM rpm for RHEL 3.0

hi
does anyone know where can i get hold of the oracleasm rpm for RHEL 3.0 ??? the version available on otn is for RHEL 2.1. Any idea when it might be out
thanks
harshad

Hi,
Last time I checked the ENT 3.x ver was on hold....Regards, --jh

HIT for RHEL 7

When is support comming for RHEL 7 based installations ? We are getting ready to turn up a RHEL 7 based datacenter and we can't seem to find a HIT for Equallogic

you made me smile. el 7.1 is right in front of the door, and still no sign of dells great hit kit. if you think, how long it took dell in the past to update the hitkit for example from el 6.4 to 6.5 ... 6+ months. dunno if theres a version for the latest el6 yet, somehow i feel like heres none for sure.
equallogic linux support is a very special story... i little bit overdone but...: nearly every el cheapo iscsi san is better in that term. or simply doesnt need a a special driver.
for me, i am done with equallogic after 4 years with several different arrays (61xx, 4xxx - 1G / 10G - SSD only). only trouble, buggy firmwares, unbelievible release times for hit kits.
expect a sales guy who tries to sell you enterprise storage contacting you ;) compellent.
cheers,

How to install Oracle 10g Release 2 (10.2) for RHEL 5

Hello Guys,
I want to install Oracle® Database 10g Release 2 (10.2) for Linux x86-64 in RHEL 5
Please experience people guide me ... please don't give me http://download.oracle.com/docs/cd/B19306_01/install.102/b15667/toc.htm (Oracle® Database Installation Guide 10g Release 2 (10.2) for Linux x86-64) link i already gone through but it's to much in depth and not able to understand what is that i can use from this.
My Machine is having 12GB RAM and it's 64bit machine.
So please provide me steps that only relate to my oracle installation. I just want to do simple installation without database and my machine not have graphical interface also.
Send me your generic steps that i can run on my machine. if you want information about my system specification please ask.
So please people help me out... i am really thankful to you guys .....
Thanks ,
ORACLE DBA P

That also good idea man. thanks for your valuable advice.
I have confusion here ...
3. Changes to be made to Kernel parameters
After installing above mentioned packages, we need to change some Kernel parameters and make them match to Oracle requirements. Parameters which should be changed are shown below
shmmax     2147483648
shmmni     4096
shmall     2097152
shmmin     1
semmsl     250
semmns     32000
semopm     100
semmni     128
file-max     65536
ip_local_port_range     1024 65000
rmem_default     1048576
rmem_max     1048576
wmem_default     262144
wmem_max     262144
We do all these changes in the /etc/sysctl.conf file by adding these lines to that file:
kernel.shmmax = 2147483648
kernel.shmall = 2097152
kernel.shmmni=4096
kernel.sem=250 32000 100 128
fs.file-max=65536
net.ipv4.ip_local_port_range=1024 65000
net.core.rmem_default=1048576
net.core.rmem_max=1048576
net.core.wmem_default=262144
net.core.wmem_max=262144
Question: What will be my value for this as my system is 64bit so this all parameter is ok if i put all straight ?
----> Setting Shell limits for the Oracle UserTo improve the performance of the software on Linux systems, you must increase the following shell limits for the oracle user:
1. Add the following lines to /etc/security/limits.conf file
oracle soft nproc 2047
oracle hard nproc 16384
oracle soft nofile 1024
oracle hard nofile 65536
2. Add the following lines to /etc/pam.d/login file
session required /lib/security/pam_limits.so
session required pam_limits.so
3. In order to use Oracle Software, we need to make a change in “oracle” user’s buffer size and number of opened file descriptors. In order to do it, we add below lines to /etc/profile file
if [ $USER = "oracle" ]; then
if [ $SHELL = "/bin/ksh" ]; then
ulimit -p 16384
ulimit -n 65536
else
ulimit -u 16384 -n 65536
fi
fi
Question: this things also i need to change ?

WLS 10.3.x for RHEL 5.4

Hi
I'm trying to download WLS 10.3.x for a RHEL 5.4, and I don't see any link from the download page for this kind of architecture (64bits for RH).
Can someone tell from where I can get it (if there is a version)?
Thanks in advance,
Andres

Hi
I'm trying to download WLS 10.3.x for a RHEL 5.4, and I don't see any link from the download page for this kind of architecture (64bits for RH).
Can someone tell from where I can get it (if there is a version)?
Thanks in advance,
Andres

Hyper-V INtegration services for RHEL 7.0

Hi all,
I am trying to get OS and IP info on RHEL 7.0 on HYper-V 2012R2 but the data given is very consistent . I mean some times I get data and some times not .
The script output is copied below when it works correctly.
Caption :
Data : getaddrinfo failed
Description :
ElementName :
InstanceID :
Name : FullyQualifiedDomainName
Source : 2
Caption :
Data :
Description :
ElementName :
InstanceID :
Name : NetworkAddressIPv4
Source : 2
Caption :
Data :
Description :
ElementName :
InstanceID :
Name : NetworkAddressIPv6
Source : 2
Caption :
Data : 3.10.0-123.el7.x86_64
Description :
ElementName :
InstanceID :
Name : OSBuildNumber
Source : 2
Caption :
Data : 0
Description :
ElementName :
InstanceID :
Name : OSDistributionData
Source : 2
Caption :
Data : 0
Description :
ElementName :
InstanceID :
Name : OSDistributionName
Source : 2
Caption :
Data : 199168
Description :
ElementName :
InstanceID :
Name : OSKernelVersion
Source : 2
Caption :
Data : 7.0
Description :
ElementName :
InstanceID :
Name : OSMajorVersion
Source : 2
Caption :
Data :
Description :
ElementName :
InstanceID :
Name : OSMinorVersion
Source : 2
Caption :
Data : Red Hat Enterprise Linux Server ### OS Name
Description :
ElementName :
InstanceID :
Name : OSName
Source : 2
Caption :
Data : 129
Description :
ElementName :
InstanceID :
Name : OSPlatformId
Source : 2
Caption :
Data : 3.10.0
Description :
ElementName :
InstanceID :
Name : OSVersion
Source : 2
Some times same script give me less details missing OS info as below
Caption :
Data : 0
Description :
ElementName :
InstanceID :
Name : OSDistributionData
Source : 2
Caption :
Data : 0
Description :
ElementName :
InstanceID :
Name : OSDistributionName
Source : 2
Caption :
Data : 199168
Description :
ElementName :
InstanceID :
Name : OSKernelVersion
Source : 2
Caption :
Data : 129
Description :
ElementName :
InstanceID :
Name : OSPlatformId
Source : 2
Let me know the correct place where i can open support ticket with Microsoft or any way for resolution?Thanks in advance,Rakesh

Hi Rakesh,
" To enable key/value pair (KVP) infrastructure, install the hypervkvpd rpm package from your RHEL ISO. Alternatively the package can be installed directly from RHEL respositories.
In Windows Server 2012 R2, the key/value pair (KVP) infrastructure might not function correctly without a Linux software update. Contact your distribution vendor to obtain the software update in case you see problems with this feature. "
For details please refer to following link:
http://technet.microsoft.com/en-US/library/dn531026.aspx
And the following forum is committed to Linux Integration Serivce for hyper-v :
http://social.technet.microsoft.com/Forums/en-US/home?forum=linuxintegrationservices
Best Regards
Elton JI
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Connect addin for RHEL (Red Hat Enterprise Linux)

Hi,
I'm trying to convert the .deb package of Adobe Connect add-in to .rpm to install on RHEL, tryed with Alien, but does not work.
Anyone knows why the Adobe, that always lauched your applications to most commons Linux packages versions, like: .rpm and .tar.gz, is packing this important add-in only in the Debian / Ubuntu format?
Too many companies uses RHEL or SuSe Linux, the Debian / Ubuntu are very used in Academic environments, wherever...
I'm waiting for a good suol to help me convert this package...
Thanks by attention,
Ricardo de Aquino Borges

HeywardDrummond,
I'm sad to know that your idea is only justify the NO packaging of a new (rpm or tar.gz) addin version. Being from the commercial or financial I understand your way of thinking, is a matter of necessity...
Oh, yes the market share!
According to your spreadsheet shows a percentage of 0.7and 0.8 for Mobile that have two versions (iOS that "does not" support the Flash Player, and the Android) great!
In contrast to the statistics, Linux has more than 5% of this market share and has only a single version for the addin. That was only developed because of the formal request made by the Brazilian government, where the company I work, actively participated.
Soon there will be a big pressure for a Linux version of Connect Application Server, (as the Flash Media Server already has the Linux version), due to the new market (the area of education), that is very interested in this valuable tool (Adobe Connect), but is synonymous with Linux....
Anyway I do not care their arguments, because this is a question of programming relatively easy to solve, a good Linux developer will be happy to carry more one version of the addin.
Thanks for your attention.

Prerequisite PRMs for RHEL 5 to install E-Business Suite 12.1.1

Hi,
I am trying to install Oracle E-Business Suite R12.1.1 on RHEL5. For that where can i get the prerequisite RPMs. Even though some of the RPMs are there in my RHEL DVD but some of those are old versions. I tried in http://rpm.pbone.net/ . But this site didn't contain all the RPMs. Where can i download missed RPMs? Is there any link to download all required rpms in one zip file. Can any one please help me. Below are the RPMs i want.....
openmotif21-2.1.30-11.EL5.i3861
glibc-2.5-123
glibc-common-2.5-123
libgcc-4.1.2-14.el53
libstdc++-4.1.2-14.el53
make-3.81-1.13
gdbm-1.8.0-26.2.13
libaio-0.3.106-3.23
kernel-headers-2.6

I am trying to install Oracle E-Business Suite R12.1.1 on RHEL5. For that where can i get the prerequisite RPMs. Even though some of the RPMs are there in my RHEL DVD but some of those are old versions. I tried in http://rpm.pbone.net/ . But this site didn't contain all the RPMs. Where can i download missed RPMs? Is there any link to download all required rpms in one zip file. Can any one please help me. Below are the RPMs i want.....
Use the yum utility to download the latest RPMs from Redhat network or configure a repository.
http://docs.redhat.com/docs/en-US/Red_Hat_Enterprise_Linux/6/html/Deployment_Guide/sec-Configuring_Yum_and_Yum_Repositories.html
Thanks,
Hussein

Certification for RHEL 5.x virtualized with VMWare

Hello,
is Oracle 11g certified on any RHEL 5.x when the system is virtualized by using VMWare?
I would really appreciate any recent links to officials documents or notes about this matter.
Thanks in advance.
Edited by: user10047839 on 19-gen-2011 6.58
Sorry, probably I am OT here.
Edited by: user10047839 on 19-gen-2011 7.01

Refer to this on MOS:
Support Position for Oracle Products Running on VMWare Virtualized Environments [ID 249212.1]
Short extract: NO Oracle software is supported on VMWare. If a problem arises Oracle support will request to reproduce the problem on a 'real' platform.
Werner

RAID configurations for RHEL partition

We have RHEL 5.x in our production environment using VMware which is configured on RAID using RAID 1, RAID 5 & RAID 10. I had couple of queries with RAID configuration:
1) Is it possible for a RHEL partition to have 2 RAID configurations, like some part of partition on RAID 1 and the remaining on RAID 5?
2) How to identify the RAID configurations used by a RHEL partition.
I hope, I have been able to explain the problem.
Requesting a reply to my query.
Regards

1) Is it possible for a RHEL partition to have 2 RAID configurations, like some part of partition on RAID 1 and the remaining on RAID 5?
No. RAID configurations work on the block level and do not use logical partitions. You can however partition a RAID volume.
2) How to identify the RAID configurations used by a RHEL partition.
Depends what you are using. If you have a hardware RAID, it is transparent to the OS and cannot be seen without using any hardware specific host adapter utilities. If it is software, it depends on mdadm, LVM or BTRFS. What are you using?
P.S. you will most likely do not want to use RAID 5 unless you have special hardware controller to deal with RAID 5 checksums, etc. It's definitely not a solution for large storage, since it will take days to rebuild in case of a failure.

Ocfs for RHEL 2.4.21-37.EL

[root@linuxb OCFSx8664]# rpm -Uvh ocfs-2.4.21-EL-smp-1.0.14-1.x86_64.rpm
error: Failed dependencies:
kernel-smp >= 2.4.21-27.EL is needed by ocfs-2.4.21-EL-smp-1.0.14-1
Suggested resolutions:
/var/spool/up2date/kernel-smp-2.4.21-37.EL.x86_64.rpm
[root@linuxb OCFSx8664]# uname -r
2.4.21-37.EL
Where can I find the ocfs rpm for 2.4.21-37.EL

You are installing package which is designed for SMP machines (2 or more processors) and it seems you don't have kernel-smp package installed
execute
rpm -q kernel-smpto check whether "kernel-smp" package is installed

OHS for RHEL 5.3

Similar Messages

Maybe you are looking for