OHS - Protocol (Periodic) Next due dates are not being captured properly

Protocol (Periodic) Next due dates are not being captured properly in the Planning Cockpit (EHSH_D_PCP) report nor the Protocol report (S_SH8_7200013). The Planned date is not resetting itself for the medical service sometimes.
Any idea what might be causing this issue?
Regards
Naveen

HI Naveen
Have you overridden the std BADI for calculating Next due date?
Thanks
Jagdsh

Similar Messages

When I plug in my iPhone to sync, it starts but does not complete the process and several pieces of data are not being transferred to my iPhone from my MacBook Air.

Problem:
When I plug in my iPhone to sync, it starts but does not complete the process and several pieces of data are not being transferred to my iPhone from my MacBook Air.
Any help that you can provide in helping my iPhone accurately sync with iPhoto and iTunes will be greatly appreciated.
Symptoms:
1)   Sync: It’s not completing the sync. Below, I’ve provided all of my settings from the iTunes Summary tab so that you might tell me if I’ve selected any incorrect options. I prefer to sync the “old school” way – by connecting to the computer – as opposed to syncing over the cloud. Perhaps this is what’s causing the problem? Here is a list of the steps displayed in the iTunes window as the sync progresses:
waiting for sync to start (step 1 of 7)
backing up (step 2 of 7)
preparing to sync (step 3 of 7)
determining apps to sync (step 4 of 7)
preparing apps to sync (step 5 of 7)
importing photos (step 6 of 7)
waiting for changes to be applied (step 7 of 7)
syncing apps / copying 1 of 4 (App name) (step 7 of 7)
canceling sync
apple icon
2)   Photos: I've selected only certain of my iPhoto albums to sync to my iPhone. All of the albums are correct/complete in iPhoto. All of the albums are listed on my iPhone, both before and after the sync, but the albums are empty (no actual photos) before and after the sync. Perhaps this is tied to the fact that the sync isn’t completing, but because “importing photos” is one of the steps that the incomplete sync displays, I don’t know.
3)   Apps: When I launch iTunes and click on the Apps folder under the Library listing, then click on the Updates tab, iTunes searches for any Apps needing to be updated and provides a list. If I click on Update All, the Apps are successfully updated in iTunes. But, when I plug in my iPhone so that the updates will transfer to the apps on my iPhone, the updates don’t transfer to the apps on my iPhone and those apps still reflect that they need updating on the iPhone.
Other Potential Pertinent Info:
The flash memory hard drive on my MacBook Air recently died (perhaps a month or two ago). Apple had emailed me about a known issue and literally the next day, my MacBook Air crashed. I installed a new flash memory drive and re-installed everything from a backup off of an external hard drive. Everything seems to be working fine; it recreated accurately all of my software and data, including iPhoto and iTunes, the pictures and songs (respectively) for which are stored on that hard drive, as opposed to being on the flash memory in the MacBook Air itself. However, I don’t recall if the start of the sync problem described herein started happening at the same time that I replaced the flash memory drive. All I know is that the computer is working perfectly in all respects and that even as the sync is failing, it at least says that it’s doing the right things and looking in the right places (e.g., the list of albums on my iPhone matches the list of albums in iTunes, etc.).
Settings/Status:
MacBook Air
OSX v. 10.9
iPhoto ’11 v. 9.5 (902.7)
iPhone iOS 7.0.4
iTunes v. 11.1.3 (8)
Summary Tab
Backups (This Computer)
Options
Automatically sync when this iPhone is connected
Sync only checked songs and videos
Photos Tab
Sync Photos from iPhoto (429 Photos)
Selected albums, Events, and Faces, and automatically include (no Events)
Albums – 9 are selected

You need to download iTunes on your computer. iOS 6 requires the latest version of iTunes which is 10.7.

Data are not being applied at destination side

Hi all,
I have implemented real time streams replication(not archive log based downstream replication).
source:9.2.0.8.0
destination:10.2.0.2.0
Capture and propagation is working fine. DBlinks are also fine. Apply process is running , but data are not being applied in destination side.
The trc file shows this:
Dump file /dev1/visdb10/10.2.0/admin/VIS_wbsebdev1/bdump/vis_p001_14628.trc
Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - Production
With the Partitioning, OLAP and Data Mining options
ORACLE_HOME = /dev1/visdb10/10.2.0
System name: Linux
Node name: wbsebdev1
Release: 2.4.21-32.ELsmp
Version: #1 SMP Fri Apr 15 21:17:59 EDT 2005
Machine: i686
Instance name: VIS
Redo thread mounted by this instance: 1
Oracle process number: 21
Unix process pid: 14628, image: oracle@wbsebdev1 (P001)
*** SERVICE NAME:(SYS$USERS) 2008-05-29 11:39:26.957
*** SESSION ID:(388.16) 2008-05-29 11:39:26.957
The Alertlog file shows at the end this:
Thu May 29 11:19:06 2008
Streams APPLY A001 with pid=16, OS id=9531 stopped
Thu May 29 11:21:25 2008
Incremental checkpoint up to RBA [0x746.d359.0], current log tail at RBA [0x746.d471.0]
Thu May 29 11:39:26 2008
Streams APPLY A001 started with pid=18, OS id=14624
Streams Apply Reader started P000 with pid=20 OS id=14626
Streams Apply Server started P001 with pid=21 OS id=14628
Thu May 29 11:41:33 2008
Incremental checkpoint up to RBA [0x746.11565.0], current log tail at RBA [0x746.121b9.0]
Pls help.
Thanking You,
Nitesh.

Problem solved.

Changed Dates Are Not Being Saved

I bought a video capture device and am editing a bunch of old family films. I'm using the latest version of iMovie and am having problems with the clip dates. I can adjust the clip date in iMovie, to say 1984, but when I close iMovie and re-open it, the date is back to 2009. How do I get the clip dates to be saved so that I can organize my old movies?

After you capture your films and split them into logical clips (I use MPEG Streamclip to split), then you can rename your clips in this format:
clip-yyyy-mm-dd hh;mm;ss.ext
where hh is hours in 24 hour time. ext is the current extension (e.g. dv, mov, mp4, etc.
Then restart iMovie.
Do not do this for clips referenced in projects that you have already started. It will break the links.

Pooled database connections are not being closed properly

We are using WLS 9.2 and Microsoft SQL Server 2005 (version 1.1 of the Microsoft JDBC driver), and we are experiencing some strange behavior with the lifecycle of the connections in our data source pools. The WLS console may report that the current capacity of a pool is 5, but the database monitoring tools report that we have more than 5 connections open. It almost seems as though connections are getting dropped somehow and WLS thinks it has closed them and created new ones, but the original connections are never actually closed in the database. Our application is the only thing connecting to the DBMS instance in question, so the connections we are seeing have definitely been created by WebLogic. Any suggestions for tracking down the source of this problem would be greatly appreciated.
Regards,
Sabrina

SabrinaL wrote:
Thank you for your help. Here is our pool configuration (NOTE: Even though we're not using Oracle, we actually did create our own empty "DUAL" table to use for testing connections):
<jdbc-connection-pool-params>
<initial-capacity>10</initial-capacity>
<max-capacity>10</max-capacity>
<shrink-frequency-seconds>0</shrink-frequency-seconds>
<test-frequency-seconds>0</test-frequency-seconds>
<test-connections-on-reserve>true</test-connections-on-reserve>
<test-table-name>DUAL</test-table-name>
</jdbc-connection-pool-params>
I'm not sure exactly when the problem starts occurring because we only recently
noticed it; as far as we can tell, it's pretty random. We have seen occasional
application errors where it appears that the app cannot obtain a connection from
the pool, but I'm not sure if that issue is directly related to this particular
problem. We were careful to scale our pool size such that it should always have
enough connections, so I'm not sure how this is possible. We are running a cluster.
Regards,
SabrinaOk, then for every server in the cluster, the server will make 10 connections.
Because you are using SQLServer, your 'test table' (that is an overloaded
field) should be set to actually define SQL that we can use for a quick test:
<test-table-name>SQL select 1</test-table-name>
That will be quicker than selecting from any real table.
We would need more info about the problem. If you turn on
JDBC logging, we might capture the exceptions that indicate
problems with the pool, however, as configured, the pools
will have only 10 connections, and will close and replace
any that fail the test. Do you have a firewall between the
DBMS and WebLogic?
Joe

Data is not being downloaded properly in EXCEL

Hi,
When i am tring to download any data from SAP , for example user list from Tcode SM04 to excel,
its coming in one single row from prodction server , whereas its working fine from IDES Srver.
please assist ,
Thanks,
Irfan.

Sarath
if visu's notes helped.. its good practice to show your appreciation by awarding him points.
also if this sorts your issue it would be a good idea to close the thread
thanks
harish

Rebel T5 does not work in live view mode. Live view is enabled but images are not being captured.

troyantonik, What lens do you have and have you tried other lenses with your camera to see if they also do not autofocus when you press the shutter button down halfway? Just in case a setting may be causing this, I recommend that you reset the camera to the default settings. Please do the following:
Press the MENU button.Select the [Tools #3] tab.Select [Clear Settings].Select [Clear All Camera Settings].Select [OK].Select [Clear All Custom Func.].Select [OK].Exit the menu.If this is a time sensitive-matter, additional support options are available at Contact Us.

Hello Troyantonik,
Since the issues with your camera seem to persist, we would recommend having the camera evaluated at the Canon Service Center. You can set up service through our web site, located here.

Why does Firefox tell that my 'sent' emails are not being redirected properly?

After clicking my 'Sent' button and message sent is advised a drop down window says This page isnt redirecting properly Firefox has detected that the server is redirecting the request for this.

Do not reply by e-mail to the e-mail notifications. Click on the link(s) provided in the e-mail notification and the page(s) will load in your browser.
Update Shockwave Flash (Adobe Flash). There is a new version.
*Check your version: http://www.mozilla.com/en-US/plugincheck/
**''Note: plugin check page does not have current version information for all plugins''
*Download and save flash installer to your hard drive from the link in the article below, close Firefox, click on the installer you downloaded, install, restart Firefox, check your version again
**See: https://support.mozilla.com/en-US/kb/Managing+the+Flash+plugin#Updating_Flash

My send messages are not being captured. all you see is the subject line.

After February 27, it seems that Thunderbird is not capturing my Sent messages. You can see the subject in the list above the line, but nothing shows up below it. If I put it in Trash, I still can't see it.
I have another mailbox on this computer, and it's working fine.
It's an old Mac (G4) running an ancient system, 10.3.9, and that supports Thunderbird 2.0.0.23
Yes, I know it's an antique, but we need to fix it right now. Please help.

It was the icon after all, and it finally worked. I think I had to clean out some of my sent mail and compact the folders first. Thank you very much.

My send messages are not being captured. Matt said to right click the folder, etc. What folder? Where?

Only the subject shows up above the line. MattAuSupport said to right click the folder, select properties and repair. But what folder are you talking about? Where will I find it?

To answer your question, it would be the folder that you are complaining about. So back to you, What folder are you having problems with? The Sent folder? Then that would be the one to right click to repair.
It is kind of like flat tires. You repair the one the air came out of.

Task Scheduling Script - Need help with passing the scheduled command (variables are not being evaluated)

Hi Everyone,
I'm trying to get a simple task scheduler script to work for me and can't get the command I need passed to the scheduler to evaluate properly.
Here's the script:
###Create a new task running $Command and execute it Daily at 6am.
$TaskName = Read-Host 'What would you like this job to be named?'
$Proto = Read-Host 'What is the protocol? (FTP/FTPS/SFTP)'
$User = Read-Host 'What is the user name?'
$Pwd = Read-Host 'What is the password?'
$Server = Read-Host 'What is the server address?'
$NetworkDir = Read-Host 'Please input the network location of the file(s) you wish to send. Refer to documentation for more details.'
$RemoteDir = Read-Host 'Please input the REMOTE directory to which you will upload your files. If there is none please input a slash'
$Command = 'winscp.com /command "option batch abort" "option confirm off" "open $Proto://$User:$Pwd@$Server" "put $NetworkDir $RemoteDir" "exit"'
$TaskAction = New-ScheduledTaskAction -Execute "$Command"
$TaskTrigger = New-ScheduledTaskTrigger -Daily -At 6am
Register-ScheduledTask -Action $TaskAction -Trigger $Tasktrigger -TaskName "$TaskName" -User "Administrator" -RunLevel Highest
Write-Host "$TaskName created to run Daily at $TaskStartTime"
What's messing up is the $Command creation, the command needs to have the quotes around "option blah blah", but if I wrap the whole line in single quotes the variables that are evaluated for the "open blah blah" strings (which also need
to be inside quotes) and the "put blah blah" string are not being evaluated properly.
I've dorked about with different bracketing and quoting but can't nail the syntax down, could someone point me in the right direction? My Google-fu seems to be lacking when it comes to nailing down this issue.
Thanks

Hmmn, closer. I'm getting this error now:
+ $Command = $tmpl -f $User, $Pwd, $Server, $NetworkDir, $RemoteDir
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidOperation: (winscp.com /com...t {4} {5}" exit:String) [], RuntimeException
+ FullyQualifiedErrorId : FormatError
And the command being added to the new task looks like this:
winscp.com /command "option batch abort" "option confirm off" "open ($Proto)://($User):($Pwd)@($Server)" "put $NetworkDir $RemoteDir" "exit"
Here's the current state of the script. I get what you're doing to try to bypass the quotes issue, using an array. I'm just not awesome at this yet sooooooo...
$TaskName = Read-Host 'What would you like this job to be named?'
$Proto = Read-Host 'What is the protocol? (FTP/FTPS/SFTP)'
$User = Read-Host 'What is the user name?'
$Pwd = Read-Host 'What is the password?'
$Server = Read-Host 'What is the server address?'
$NetworkDir = Read-Host 'Please input the network location of the file(s) you wish to send. Refer to documentation for more details.'
$RemoteDir = Read-Host 'Please input the REMOTE directory to which you will upload your files. If there is none please input a slash'
$tmpl = 'winscp.com /command "option batch abort" "option confirm off" "open {0}://{1}:{2}@{3}" "put {4} {5}" exit'
$Command = $tmpl -f $User, $Pwd, $Server, $NetworkDir, $RemoteDir
$TaskAction = New-ScheduledTaskAction -Execute $Command
$TaskTrigger = New-ScheduledTaskTrigger -Daily -At 6am
Register-ScheduledTask -Action $TaskAction -Trigger $Tasktrigger -TaskName "$TaskName" -User "Administrator" -RunLevel Highest
Write-Host "$TaskName created to run Daily at $TaskStartTime"

Mapping errors not being captured in wb_rt_errors

Hi All,
We use OWB mapping to load the data from stage tables to transactional tables. However, errors are not being captured in wb_rt_errors eventhough table loading is failing. We have no clue why it is failing. Please let us know if you have any idea why the errors are not being captured ?
We are capturing the audit id during the load erros. Using the below queries to validate the data.
SELECT * FROM WB_RT_AUDIT WHERE RTE_ID=15852682 ORDER BY CREATION_DATE DESC;
SELECT * FROM WB_RT_ERRORS WHERE RTE_IID=15852682; Thanks and Regards
Nagaraja akkivalli.

I've had similar problems. I've found that the Flash CC file sometimes loses the reference to the document class file and that the source paths in the Actionscript settings are gone when re-opening a file. If I re-enter the document class (and paths) in the Actionscript Settings dialogue it will reconnect with Flash Builder.

Is it possible to see next due date in the table.

Hi everybody,
I would like to know one information regarding next due date. We are having one requirement we want to know the next due date in the table. Actually we are able to get the same in FBL1N. But it is generating at the time report generation because it is storing in the structure.
Is there any solution is available to see the same in any table.
Thanks in advance.
regards.
Chandra Sekhar

Hi
Thanks for your reply. By generating custom report, I can get the information. Actually I want to know by considering the payment terms in the transaction data, whether the payment date is storing by system in any table or not.
Thanks in advance if you are providing the information.
regards.

Event dates are not bolded by Date Navigator in Outlook 2010

Event dates are not bolded by Date Navigator in Outlook 2010 on my own calendar. Events are set to busy but it is not working. View Settings > Other Settings > "Bolded dates in Date Navigator represent days containing items" is
checked. This previously worked for 2+ years but recently stopped working. All plugins were disabled, Outlook 2010 was uninstalled and then re-installed. OST file was deleted and re-synchronized with Exchange 2007. While the OST was re-synchronizing the
bolding worked properly but upon next restart of Outlook it went away. Another symptom is that my Scheduling Assistant does not show my free/busy times correctly in my local view. If I look at my own schedule via the Scheduling Assistant of another user, the
free/busy times show up correctly. My webmail account also correctly shows bolded dates and free/busy suggesting that this is a local problem. Some screen shots below. Anyone have any ideas as to what I need to tweak? Using Oulook 2010 v.14.7116.500 (32-bit).
This is not a shared calendar.

Hi,
If you want to completely uninstall or remove Microsoft Office 2010, we can refer to the following article to do it:
http://office.microsoft.com/en-us/support/how-to-uninstall-or-remove-microsoft-office-2010-suites-HA104027750.aspx
Additionally, since the issue doesn’t happen in other computers, I think the issue may be also caused by some third-party programs in your original computer. If the complete uninstallation doesn’t help for this issue, I suggest we can try to perform a clean
boot in your Windows for more troubleshooting:
http://support.microsoft.com/kb/929135/en-us
Thanks,
Winnie Liang
TechNet Community Support

Sales data are not integrated in R/3

Hello
I use BTE DE_BALE on R/3 to integrate data coming from CRM extension (EEWB). Everythig's fine in the customer FM in R/3 : I get the extension data and I add to table CT_IDOC_DATA segment E1KNVVM with these data, but they are not updated in R/3. I try to debughow the IDoc table CT_IDOC_DATA is integrated and there seems to be a problem. I don't know which ALE configuration has to be done to integrate CRM IDocs (IDoc type seemsto be DEBMAS..). How can I check it ? Is there somewhere I can check that data are not integrated ?
Thanks

Hi Karuna
Nice to have a so quick help.
Thanks
Below the source code of my FM :
DATA :
gv_partner_guid     TYPE BU_PARTNER_GUID_BAPI,
gv_partner         TYPE BU_PARTNER,
gv_crm_application LIKE bapimtcs-gen_chrstr VALUE 'Z1HT',
s_eewb_saledata    TYPE ZZ1HT_BUPA_MAIN_APPEND,
t_salesdata TYPE ZZ1HT_TABLE,
s_salesdata LIKE LINE OF t_salesdata,
t_knvv TYPE STANDARD TABLE OF KNVV ,
s_knvv LIKE LINE OF t_knvv,
s_bapimtcs TYPE BAPIMTCS,
t_bapimtcs TYPE STANDARD TABLE OF BAPIMTCS,
ls_e1knvvm LIKE E1KNVVM.
REFRESH : t_salesdata,t_knvv,t_bapimtcs.
CLEAR : s_salesdata,s_knvv,s_eewb_saledata,gv_partner_guid,gv_partner,
          s_bapimtcs,ls_e1knvvm.
IF sy-uname EQ 'SAGUETTA'.
    break-point.
ELSE.
    EXIT.
ENDIF.
MOVE is_complex_structure-header-object_instance-bpartnerguid
TO   gv_partner_guid.
MOVE IS_COMPLEX_STRUCTURE-header-object_instance-bpartner
TO gv_partner.
LOOP AT it_bapimtcs INTO s_bapimtcs.
    APPEND s_bapimtcs TO t_bapimtcs.
ENDLOOP.
CALL FUNCTION 'COM_BUPA_BAPIMTCS_TO_SET'
    EXPORTING
      iv_partner_guid = gv_partner_guid
      iv_application = gv_crm_application
    CHANGING
      ct_bapimtcs     = t_bapimtcs
      cs_set          = s_eewb_saledata.
MOVE s_eewb_saledata-ZZ1HT_DATA TO t_salesdata.
LOOP AT t_salesdata into s_salesdata.
    CALL FUNCTION 'PI_BP_INIT_IDOC_STRUCTURES'
      IMPORTING
        ES_E1KNVVM = LS_E1KNVVM
      EXCEPTIONS
        OTHERS     = 0.
    MOVE s_salesdata-data_key-salesdom(4) TO LS_E1KNVVM-vkorg.
    MOVE s_salesdata-data_key-salesdom+4(2) TO LS_E1KNVVM-vtweg.
    MOVE s_salesdata-data_key-salesdom+6(2) TO LS_E1KNVVM-spart.
    MOVE s_salesdata-data-perfk TO LS_E1KNVVM-perfk.
    MOVE s_salesdata-data-lprio TO LS_E1KNVVM-lprio.
    CT_IDOC_DATA-MANDT = sy-mandt.
    ls_e1knvvm-msgfn = '004'.
    CT_IDOC_DATA-SEGNAM = 'E1KNVVM'.
    CT_IDOC_DATA-SDATA = ls_e1knvvm.
    APPEND CT_IDOC_DATA.
    CLEAR ls_e1knvvm.
ENDLOOP.

OHS - Protocol (Periodic) Next due dates are not being captured properly

Similar Messages

Maybe you are looking for