Oi vay! a mac thats too slow to use DVDs, quicktime, imovi,

OI VAY!!I believe I was sold a mac, by a mac expert nonetheless, that is far too slow and lacking in memory to watch videos in any form, dvd, file, with quicktime, etc.
And it seems too old for the updates available.
its a iBook G4
version 10.4.11
processor: 800 mhz (slow!)
memory: 640 mhz (low!)
Can anyone pls confirm or tell me otherwise please!?
thank u all or any replies most appreciated!
m in berlin

The computer should be able to play DVDs, if it has the correct Combo optical drive,
(and not a CD-RW basic drive) and the RAM can be increased to 1.12GB by adding
a chip under the keyboard in the upgrade slot there.
All in that series should have been able to play DVD media and record/play CD media.
You can find more specifications about portable Mac and others by getting the
Mactracker download from http://mactracker.ca and note the iBook (G4) info.
According to this ^ database (free download) the RAM max is over 1024MB.
Early iBook G4 tech specs: http://support.apple.com/kb/SP89
The software updates for Tiger 10.4.11 should appear when you run Software Update
from the menu which appears when you click on the Blue Apple in left side menubar.
You could also get the items which appear in there, direct as stand-alone installers
from Apple Support downloads online (good for later re-installs, if necessary, if saved.)
Not sure what the problem really is, in regard to the computer. There is a DVD Player
which should launch automatically on insertion of DVD media; in System Preferences
you can choose how media discs are handled in the appropriate Preference panel.
Note, you may have to buy an iLife version suitable for the computer you have, and
due to technical differences in the older 800MHz iBook G4 vs some latest models,
the iLife 09 may have specifications unsupported in the hardware of that computer.
iLife 06 is better suited for older G4 Macs, and that is a retail installer disc. You may
be able to get one in the second-hand market. Tiger 10.4 retail disc itself does not
contain an iLife version, as that was a separate disc. Computers that shipped with
Tiger 10.4.x included extra software and they had an iLife version, plus AppleWorks.
You can see a DVD without iLife installed, DVD Player should be in Applications folder.
iLife '09 Support: http://www.apple.com/support/ilife/
So, perhaps the alleged expert may have omitted something or the other in discussion
of the computer; ideally, the best iBook G4 would be the last edition 1.33/1.42GHz 12/14".
Hopefully this helps a bit.
Good luck & happy computing!
edited.

Similar Messages

Mac pro too slow to use, spinning ball, no finder response, only hard power off, installing system stalls at 18 minutes left.

mac pro too slow to use, spinning ball, no finder response, only hard power off, installing system stalls at 18 minutes left.
It is taking an hour to power up and mac apple logo appear onscreen. No finder controls or "clicks" are being recognized. Spinning beachball all the time.
Using hard power off and holding the mouse down, I was able to open the optical drive and then restart with "c" and ask the dvd to reinstall the system, but it has stalled before finishing the installation.
This happened about 4 days ago, first it started responding slowly, and then it just keeps spinning the beachball. I can't find hardware test. I did run etrecheck, it did not have any error messages, but I can't copy or move the data anywhere.... I am not able to access the mac pro with another machine, and now I am stuck in install freeze, so I can't copy etrecheck by hand onto a piece of paper.
Without being able to finish a reinstall, what can I try?
After it got bad, and before it got REALLY bad, I managed to repair permissions, but it took a long time. Most of a day. When I restarted from that, things were only worse.
Mac Pro 1,1 , 11 GB ram, 7300, 5TB hard drives, OS 10.6.8, the drive containing the system folder is/was 700 used, 290 free. While I could get commands to respond, I put Activity monitor on the desktop and watched it. System memory was 3.31 GB used, about 7 free, and some wired. No app was using a huge amount.
what should I try next? I put a bid on a new/old machine so that I could move the 4 hard drives over.

Thank you for all your suggestions. Please correct me as I articulate this.
I have three versions( 5, 6, CC) of the Adobe Master Collection which I keep active for different clients. I have final cut and motion. I have Office 365. I have a collection of graphic apps that are individually not too big but in all, my app folder is 65GB and my bootcamp partition is 61GB. I can't fit all this on 120 ssd and a 256 will be full once I install, correct? drives should be half open?
Somehow I did not make it clear enough that I was trying to copy onto a 2TB drive I had just initiallized in order to try and save files from my startup drive. I don't use time machine. I take a day or a few days worth of documents and physically move them to another drive at night. If a series is finished I make two dvd's as well. The second black drive that was failing was the drive I moved my backup documents onto. At no point was I trying to backup onto the failing drives. I was trying to copy off both of them onto the other two drives, a third aux backup that has been there for a while, and a newish 2 TB which I designated as the startup drive when all this trouble started.
I wondered if there were any good techniques for trying to get the data off the failing drive. Thanks for the suggestion of Data Rescue 3. I don't have it yet, but I will try it as soon as I get it. I was never trying to repair in place.
I am very interested in getting a pci bracket and an ssd, but I may wait until I can afford the larger one. If I get an older bracket that is compatible with my old mac pro 1,1 , I'd like to be able to move it to a mac pro 3,1 if I get one. Will the larger ssd drives be compatible with the sata in a pci bracket that can work in my mac pro 1,1 ? sata 2 versus something else? If 240 or 256 is my size limit, how much more than my 65 and 61 GB partitions can I put on there? How much of a scratch disc can I make if I leave another 39 GB of headroom on my bootcamp partition? I'm filling 165 GB without making any allowance for temp files.
You have said that 120 is enough for any system. I think I must be misunderstanding something. Are you saying that assuming that most people run office and photoshop and maybe lightroom?
I have and use 4 HDD in this machine, mostly for document storage in two places.
I took out all but the group of 2GB ram chips I bought a year and a half ago. The old ram had passed the hardware test the last time I had access to the hardware test. Two black drives failed, one was a year old and one was a year and a half old, and that it may have been exacerbated by the heat wave. I don't know why the video and the monitor were affected save that the startup drive was failing. I am trying to replace the card.
With all this said, I am also looking at a used mac pro 3,1 with a better video card since a newer machine will likley be compatible through another OS upgrade. If a machine costs only a little more than a new card, it might be a better way to go.
I don't have any sources that offer an ssd for 100. ( of a size that is useful)
How large is your application folder?

After change to Mavericks my Mac become too slow e I can't use it because stays asking passwords for "talagent" and "messages agent" as icloud keys. I got changed the icloud password many times and still doesn't work. I can't open any program.

After change to Mavericks my Mac become too slow e I can't use it because stays asking passwords for "talagent" and "messages agent" as icloud keys. I got changed the icloud password many times and still doesn't work. I can't open any program.

Back up all data.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Select the login keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password, unless you've changed it.
Right-click or control-click the login entry in the list. From the menu that pops up, select Change Settings for Keychain "login". In the sheet that opens, uncheck both boxes, if not already unchecked.
From the menu bar, select
Keychain Access ▹ Preferences ▹ First Aid
If the box marked Keep login keychain unlocked is not checked, check it.
Select
Keychain Access ▹ Keychain First Aid
from the menu bar and repair the keychain. Quit Keychain Access.

Mac working too slow when switch to one to another user acconut

Mac working too slow when switch to one to another user acconut...
it means when working on one user acconut and i switch to another account its take too much loading + slower than 10.8
solve it..
Thanks

iTunes will naturally stop playing since it acknowledges that you're not actively using your current account.

My mac got too slow during startup.

My mac got too slow during start up. how I can make it as before?

Download and run Etrecheck. Copy and paste the results into your next post. It's a diagnostic tool that was developed by one of the most respected users here in the ASC.

Lightroom 2.4 Is Too Slow To Use As A Professional Product

Hello -
I would like to know how to get Lightroom to respond in less than 4-8 seconds for almost any task.
From returning to Grid mode (4.5 seconds) to adjusting a routine crop and angle (5-7 seconds per move, 60-90 seconds total) to simply shift-selecting three to fifty photos (4-9 seconds) no matter what I do in Lightroom, it is worse that Photoshop 1.0 on a Mac Plus. Really.
Returning to Lightroom from another app - 7 seconds.
Getting the menus to drop down - 4 seconds.
My lightroom settings:
standard preview size: 1680
Quality: High
Discard 1:1: Never
write changes to XMP: off
Catalog: 127 mb on F drive (24 gig free)
Catalog: 13.5k photos, 95 gig on F drive
Cache: 6 gig on F drive
NVIDIA settings: performance over quality
My computer:
HP 8730 elitebook
4 gig ram
XP Pro, SP2
Proc: Core 2 Duo T9400, 2666 MHz (10 x 267)
DirectX 4.09.00.0904 (DirectX 9.0c)
Chipset: Cantiga PM45
Video: NVIDIA Quadro FX 3700M (1024 MB)
(2x) 250 gig 7200 rmp HD
Before anyone says to export to a new catalog and re-import, etc, use a smaller catalog, etc, be advised that I have done all of that. I have imported only 250 images to a new catalog, on a newly installed OS, with Lightroom as the ONLY application. Still it acts this sluggish.
I have scoured the boards for solutions, and having tried all the varied fixes to no avail, I really quite strongly feel that a person should not EVER be in the position or running some of the most powerful available hardware and STILL have to wait interminable seconds for Lightroom to respond.
This software, as it stands now on the PC platform (unless I am missing something quite obvous) is absolutely unusable in its present state.
Can someone from Adobe or a board guru please respond in kind to my request for help?

Photo_op8 wrote:
BradKaye wrote:
I'd have to agree with the subject of this 100%, even though I'm not experiencing anywhere near the levels of lag ellsworth is on any of my primary workhorses.
1st-Gen 17" MacBook Pro 2.4Ghz Intel Core 2 Duo with Hi-Rez Screen (about 2 years old)
1st-Gen MacPro (Dual Twin-Core 3Ghz, 3x, 10k-RPM 150GB Raptor RAID-0, partitioned to System/Scratch/Files (in that order) 16GB RAM...blah blah (about 2.2 years old)
3 week old MacPro 2x2.66 Quad-Core MacPro, 16GB RAM, Multiple Partitioned (System/Scratch/Files) Internal 4x-1.5TB RAID-0, 4x 1.5TB eSATA RAID-0, 2x NVIDIA GT 120's, 30" NEC 3090WQXi, 26" LaCie 526, 24" Apple LED Display
OS 10.5.8 on all machines.
Let me repeat-
Partitioning ONE drive to contain system files, application, cache, catalog and photos=SLOW.
It really doesn't matter that the drive is 7200 or 10k rpm if ALL items reside on the same drive. The MacPro has four bays. One drive for system and catalog, second for cache, third for photos=FAST.
Wow, I'm glad you repeated that, and used capitalized text so that I would be sure to understand.
Clearly, the benchmarks I have off of the various evolutions of my last 3, $10k computers must be in error. (single system disk, RAID-0 system disk, 10k RPM system disk, RAID-0 3x -10K rpm system disks, multiple scratch volumes on different drives, singular scratch volumes on RAIDed drives, tested via benchmark programs and application specific batch tests, etc.etc.)
More importantly as an issue of forum protocol, you didn't actually read my post.
Brad Kaye wrote:
I partition about 10% of the outside of a drive as separate and put the information I need to get to most quickly which tends to be the system folder then scratch disk in a another separate partition and then I leave the rest on that drive as gobs of 'B' space for media and other crap files, reserving the first 10%-30% of the outside of a different drive (or RAID-0 sets) for my files and Lightroom catalogs.
I'm throwing 370 mb/sec between two individual sets of 4 drive RAID-0 sets. Single 7200rpm drives sling about 80 mb/sec. My drive arrangement isn't the reason Lightroom IS TOO SLOW TO USE AS A PROFESSIONAL PRODUCT.
Also, since I referenced and linked the former software engineer turned photo FREAK in my post, whose blog I started reading last year corroborating the decisions I've made in my previous system setups with immaculate documentation and testing procedure your response even more seems like the entire reason I rarely bother posting in community forums. You seem to be here to spout, not to contribute and learn.
Take a look at all of the info contained here: (I've already read it, all of it, and more)
Diglloyd Mac Performance Guide
and if you still think I'm wrong, lets have an informed debate about it. Really.
Otherwise, lets please keep this topic moving forward with the issues Adobe needs to address next to make Lightroom a better product for professional photographers, and specifically, help out ellsworth999 who started this topic, who seems to have a big helping of problems on his plate. I can't speak to him directly of his problems since I'm not using the Windows version of the software.

4 to 4.1 - too slow to use.

Since upgrading to 4.1 LR has become too slow to use.
The problem lies primarily, but not restricted to, the noise reduction sliders. The luminance slider specifically.
Unless I can fix something I will have to return to an older version, Im actually thinking of going back to 3.6 which worked fine on my machine - AMD E2, Dual Core graphics, 4gm RAM.
Please help.

The queries are the same across all three database platforms and have been examined by our dba's and run through SQL Server optimizer to get the access path. All queries are very simple...the system was originally written in Btrieve. It is "record at a time" in nature. The program that does the screen refresh does three seperate queries...all something like, select * from tablename where key = 'abc'. The program then combines the data into a single record and returns the results. Like I said...SQL Server 1 second. Each of the three tables has 30,000 records, all with unique keys. The data returned to the application is probably 50 records, each 200 bytes...all character data. All tests were done with the same workstation on the same LAN....I don't think LAN latency is the problem here. Using other query tools, the response back is good, as expected.
Another example...at application startup, we load all of the metadata (columns, primary key segments and index segments) into memory using the standard odbc api calls...SQLColumns, SQLPrimaryKeys and SQLStatistics. SQL Server loads this in maybe 8-10 seconds while Oracle loads in 15 minutes at best. These queries we don't control and it is still unbelievably slow. Again, using the ODBCTEST utility, the results for these api's come back pretty quick.
If it is our application causing the problem in some way then it should be equally slow across all platforms, right?
By the way, we had one of your Oracle Consultants in house trying to solve the metadata problem and he was unable to find any problem in our application and had no answers for us.
Thanks for the quick response.
Lon Diehl

How do I install Photo Elements on a mac that does not have a DVD/CD drive?

How do I install Photo Elements on a mac that does not have a DVD/CD drive?

Hi Lauren,
You can download it from : http://www.adobe.com/downloads and then install.
If you are using an older version you can try downloading it from :
http://prodesigntools.com/all-adobe-cs5-direct-download-links.html

Problem with InDesign CC redrawing the screen too slow while using Zoom tool

Hello. I got a problem with InDesign CC redrawing the screen too slow while using Zoom tool. Sometimes it takes more than a secong to zoom in or out. However InDesign CS6, Photoshop CC, Illustrator CC works just fine. What could be the problem, videocard or something else? Below is my PC configuration: OS Windows 8 Pro (x64); processor Intel Core i7 2600k CPU 3,40GHz; video adapter NVIDIA GeForse GTS 450; monitor NEC PA271W (2560x1440).

Yes it’s a bug. The trick is to select the tool and then left click the photo information strip and hold for a few seconds until you see the windows bar at the top of the screen (not responding)
The lasso tool should then work normally.

I have a macbook pro. I want to print to a Dell photoprinter 720. Is there a driver for my mac that will let me use my printer?

I have a macbook pro. I want to print to a Dell photoprinter 720. Is there a driver for my mac that will let me use my printer?

Dell only provide some rather old Windows drivers for this model, no Mac drivers at all.
Plug it in, you may get lucky but frankly I doubt it.

My mac got too slow within certain minutes

Hello,
I've got a huge problem with my iMac: -
iMac from 2012
8GB Ram
3,4 GHz i7 Quadcore
1 TB hard disk
AMD HD 6970M 2GB
- within only minutes, my mac got unbelievable slow. Way too slow.
Certain examples:
My mac isn't able to show the clock on the dashboard fluently, that means, the second hand does two steps, and then the mac stops for 10-15 seconds. The again two steps, then it stops again..
My mac is useless. After every click with the mouse, the colored circle comes up, and I have to wait for 10-15 seconds.
I didn't change anything when this problem comes up. On the harddisk is more than 25% free space.
I am absolutely confused and frustrated.
I should tell you, that my windows partition on the Mac hard disc works without any problems, so actually the problem cannot be any hardware issues... I think..
Please, Please help me, I need my mac.
Greetings
Tim

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen. Click the Clear Display icon in the toolbar. Then take one of the actions that you're having trouble with. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

10.9.4 update- MacBook Pro now too slow to use

I installed the 10.9.4 update on July 17. Early 2011 13" MacBook Pro. It has since become too slow to be functional. 'Spinning wheel' constantly, and delays after keystrokes. I had no problems at all before this update. I have read that repairing disk permissions sometimes helps and have tried that. I sometimes have brief periods of normal performance, then it slows down again.
The problem is not specific to an application. It is slow regardless of what I am doing, even when first staring up and logging in.

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start Time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Is Version Cue CS4 TOO SLOW TO USE??????

Is it just me or is the new CS4 versioncue workflow extremely slow?
After installing Version Cue CS4 on the same server that was running CS3 and trying to open an existing InDesign project (book with dozens of linked images), I realized that using VersionCue CS4 is so painfully slow compared to CS3 that it's unusable.
It seems that VC CS4 does not create local copies on the hard drive and instead, all traffic is sent over the relatively slow Ethernet connections. While this does help with synchronizing confusions, it makes working on the projects way too slow.
VC CS4 is running with 768MB on my server, so I don't think that is the problem.
Will someone respond to this post and let me know if (a) I'm probably doing something wrong and everything will be OK, or (b) if I can install CS4 and still use VC CS3 on the server?
thanks in advance!

Thanks for the response.. It seems a bit hit or miss on opening up my projects.
For example, if I click on a PDF file in Bridge, it takes upwards of a minute to launch Acrobat 9 and display the first page. If I open Acrobat 9 first, and then click on the PDF, it opens almost instantly.
Also, we have a job with a Microsoft PPT slideshow. When editing the slide show and saving back to the Version Cue 4 server (pressing save in the PowerPoint program), it takes upwards of a minute.
This is with 768MB allocated to the stand-alone server, and 1GB assigned to the Adobe Drive CS4 cache on the client computer.
Does anyone know how to get VC CS4 or Adobe Drive to operate faster?

How do i back up my iphone 4 on a mac that my sister already uses her iphone4 on

How do i back up my iphone 4 on my sisters mac that she also uses for her iphone 4. i was told it can backup up to 7 Devices.

Follow this user tip by wjosten to save all your data and update your phone:
Syncing to a "New" Computer or replacing a "crashed" Hard Drive
This one is interesting too:
Recovering your iTunes library from your iPod or iOS device

HP TOUCH Smart300 pc my computer is running too slow I used to go to accessories and select defrag

my desktop TouchSmart300PC is running to slow, i used to go to all programs and select accesories and select defrag
and it would run and cancel all unwanted material. I cannot find a place to defrag on my computer.
[Personal Information Removed]

You don't say which system you're running, but if it's Windows 7 you go to Accessories then System Tools and it's in there. I hope that helps

Oi vay! a mac thats too slow to use DVDs, quicktime, imovi,

Similar Messages

Maybe you are looking for