OID 10.1.4.2.0 for Linux Preview Install : Any insight on why this fails?

This question is also posted in the "Forum: Oracle Authentication Services for Operating System"
I am trying to install the preview. I am using example provided in OID-LinuxWorld-Demo-OAS_viewlet_swf.html.
Any insight on why this fails? see below...
[oracle@akaoradev-vm1 ~]$ su - root
Password:
[root@akaoradev-vm1 ~]# up2date oracle-oid
Fetching Obsoletes list for channel: el5_i386_latest...
Fetching rpm headers...
Name Version Rel
The following packages you requested were not found:
oracle-oid
[root@akaoradev-vm1 ~]#

The error indicates that the password (or wallet) files oidpwdldap1 and oidpwdr<ORACLE_SID> do NOT exist under $ORACLE_HOME/ldap/admin or your $ORACLE_HOME and $PATH are set incorrectly (a bit unlikely).
Assuming that the $ORACLE_HOME and $PATH are indeed set to correct values, if the 2 files mentioned above do not exist under $ORACLE_HOME/ldap/admin, then perform the below action plan:
1. Set the ORACLE_HOME to INFRASTRUCTURE ORACLE_HOME
2. set the PATH to $ORACLE_HOME/bin:$ORACLE_HOME/ldap/bin:$ORACLE_HOME/opmn/bin:$PATH
3. Ensure that you are able to login to sqlplus as "ods" user.
4. If you do NOT know the password of ods user, then reset the password.
5. Run the below command and enter the ods password when prompted for it.
oidpasswd create_wallet=true
6. Voila! The Wallet files are created under $ORACLE_HOME/ldap/admin.
HTH,
Regards,
Praveen
Edited by: Praveen B K on Aug 28, 2009 3:20 AM

Similar Messages

OID 10.1.4.2.0 for Linux Preview Install

I am trying to install the preview. I am using example provided in OID-LinuxWorld-Demo-OAS_viewlet_swf.html.
Any insight on why this fails? see below...
[oracle@akaoradev-vm1 ~]$ su - root
Password:
[root@akaoradev-vm1 ~]# up2date oracle-oid
Fetching Obsoletes list for channel: el5_i386_latest...
Fetching rpm headers...
Name Version Rel
The following packages you requested were not found:
oracle-oid
[root@akaoradev-vm1 ~]#

Yes, the linux is registered with Oracle ULN (Network only). This is a test VMWARE environment.
See below...
[root@akaoradev-vm1 ~]# date
Thu May 29 14:16:44 AKDT 2008
[root@akaoradev-vm1 ~]# uname -a
Linux akaoradev-vm1 2.6.18-53.1.21.0.1.el5 #1 SMP Tue May 20 15:36:52 EDT 2008 i686 i686 i386 GNU/Linux
[root@akaoradev-vm1 ~]# up2date --show-channels
el5_i386_latest
el5_i386_oracle
[root@akaoradev-vm1 ~]# up2date oracle-oid
Fetching Obsoletes list for channel: el5_i386_latest...
Fetching Obsoletes list for channel: el5_i386_oracle...
Fetching rpm headers...
Name Version Rel
The following packages you requested were not found:
oracle-oid
[root@akaoradev-vm1 ~]#

I have purchased two audiobooks from iTunes. They play perfectly for about 13 minutes and then abruptly stop. I have purchased other audiobooks and have not had a problem. Please, any ideas on why this is happening and what can I do to fix it. Thanks!

I have purchased two audiobooks from iTunes. They play perfectly for about 13 minutes and then abruptly stop. I have purchased other audiobooks and have not had a problem. Please, any ideas on why this is happening and what can I do to fix it. Thanks!

As long as you use your computer like King Penguin stated for Report a Problem, you should be fine. If you can't get to your computer, are not using your computer, or your computer is not longer in the mix since you have been using your iPad, email iTunes support about the problem.
http://www.apple.com/emea/support/itunes/contact.html

HT1338 I have MacBook with OS 10.5.8. Is there any way for me to install and run keynote on this machine? Do I need to upgrade OS and how? Thanks

I have MacBook with OS 10.5.8
Is there any way for me to install and run Keynote on this machine? Thanks

Welcome to the Apple Support Communities
Keynote '09 is compatible with your computer, but you won't get the latest Keynote version running that version. As you have an Early 2008 MacBook, first I recommend you to update to Mac OS X Snow Leopard to get newer versions of all applications but without losing any applications > http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard Make a backup before upgrading.
The DVD contains Mac OS X 10.6.3, so after upgrading, open  > Software Update to update to 10.6.8. Then, you will get access to the App Store.
However, the Keynote version available in the App Store is only compatible with OS X 10.7.5 or newer, so now you have two options:
1. Upgrade to OS X Lion and purchase Keynote from the App Store.
2. Keep Mac OS X Leopard or Snow Leopard, and buy Keynote on a DVD in eBay or Amazon. Note that you won't be running the most recent Keynote version, but it doesn't mind (the latest version only adds iCloud support)

TS1389 i'm not able to transfer files/download apps through itune. it keep asking me to authorization. i do this for many times....but why this asking me again and again.

i'm not able to transfer files/download apps through itune. it keep asking me to authorization. i do this for many times....but why this asking me again and again.

To avoid that I would recommend deleting the folder first the copying won't be an issue or deleting all the files in the directory. I know this is an extra step but just like the warning on plastic bags someone somewhere did something they shouldn't have
Sorry, I have been there.
So generally it will ask you if you want to do this for X number of files
IT SHOULD ASK ONCE AND ONLY ONCE
I SAY YES AND GO AWAY AND I HAVE TO COME BACK AND HIT YES AGAIN
To avoid that I would recommend deleting the folder first the copying won't be an issue or deleting all the files in the directory. I know this is an extra step but just like the warning on plastic bags someone somewhere did something they shouldn't have
ND LOSE AL THE RIGHTS...
THIS IS BAD ADVICE!

PSE7 (editor) not opening for Vista 64-bit, any insight?

Six months ago I bought a new Dell laptop with Elements 7.0 and up until a few days ago it was working great.
Now, when I double-click on a .jpg, and as Photoshop is loading I get an error message saying that editor has stopped working and has to close, which is the only option I have. I haven't been able to access the full editor function for almost a week. Today after a total of 4 hours on the phone with Dell they were useless. I talked to both hardware and software departments and though they tried they couldn't figure out what was going on. I have also uninstalled and reinstalled the program which I have on disk. The organizer opens fine but no way to open the full editor.
So, I guess I have two questions?
1) Is this in fact a problem with my computer or could it be the adobe software?
and 2) If I were to buy PSE8 and simply bag the old program would that work better on my PC with Vista-64, or might I still suffer the same inability to open the editor?
Perhaps I'm barking up the wrong tree here, but I had to pose the questions. So frustrated, any insight or help would be greatly appreciated. I have no idea what to do by this point. Thanks.

Unfortunately, there are many reasons why the PSE Editor might crash, and often it is hard to diagnose quickly the reason for the crash. Here are some steps you can take to try to fix the problem. Even if you think you’ve tried some of these before, try them again, precisely as described here:
http://www.johnrellis.com/psedbtool/photoshopelements-6-7-faq.htm#_Troubleshooting_Editor_ crashes

Novell client for linux - scripted install and configure

the novell client is included in SLED11 SP1
the configuration files are in /etc/opt/novell/ncl (esp login.conf)
I want to script the configuration of the novell-client. Some of the things the interface yast - Novell client does, is:
modify /etc/pam.d/gdm
create /lib/security/pam_ncl_autologin.so
... and maybe more....?
according to Novell Documentation there should be a make_novell-client-conf_rpm Bash script but i cant find it in any of the recent clients (download) nor on the SLED installation.
I think just copying pam.d files and the .so file will work, but might cause troubles in the long run.
What should i do to create these by script?

Originally Posted by lowalcohol
assuming this will do the same as installing it from yast - software, the client is not configured (tree, context, slp) and lacks key files such as /lib/security/pam_ncl_autologin.so needed for integrated login.
/lib/security/pam_ncl_autologin.so is updated by the post processing inside the rpm's. We don't need to do anything. however there is much to do. i'll show what i do. You need to change the variables and entries to suit your env.
create a repo on a build server using the following in fstab
Code:
/srv/www/htdocs/iso/novell-client-2.0-sp2-p2-sle11-i586.iso /srv/www/htdocs/novcli2.sp2/i586 iso9660 user,auto,loop,uid=30,gid=8 0 0
/srv/www/htdocs/iso/novell-client-2.0-sp2-p2-sle11-x86_64.iso /srv/www/htdocs/novcli2.sp2/x86_64 iso9660 user,auto,loop,uid=30,gid=8 0 0
add a repo to the install
zypper -n ar --refresh http://build/novcli2.sp2/$PROC "Novell client 2"
add in bits for ldap
Code:
cd /tmp
wget $WEBPATH/ldap.tbz2
if [ -s ldap.tbz2 ]; then
cd /
tar xjvf /tmp/ldap.tbz2
cd /tmp
fi # if [ -s ldap.tbz2 ];
echo '+::::::' >>/etc/passwd
echo '+' >>/etc/shadow
echo '+:::' >>/etc/group
ldap.tbz2 contains the following after they been changed by 'yast ldap'.
\etc
\etc\ldap.conf
\etc\nsswitch.conf
\etc\openldap
\etc\pam.d
\etc\openldap\ldap.conf
\etc\pam.d\common-account-pc
\etc\pam.d\common-auth-pc
\etc\pam.d\common-password-pc
\etc\pam.d\common-session-pc
add in the client
Code:
zypper --no-refresh --no-gpg-checks -n in -l -t pattern novell-ncl
#lock the files to protect them from future 'zypper dup'
zypper al nici64 novell-client novell-client-script novell-konqueror-plugin novell-nautilus-plugin novell-nmasclient novell-novfsd novell-qtgui novell-ui-base novell-xplatlib novell-xtier-base novell-xtier-core novell-xtier-xplat yast2-novell-client
chkconfig micasad on
configure the client
[CODE]
sed -i s/";net.slp.useScopes.*"/"net.slp.useScopes = FRED, LARRY"/ /etc/slp.conf
sed -i s/";net.slp.DAAddresses.*"/"net.slp.DAAddresses = 10.251.1.99, 10.249.1.99"/ /etc/slp.conf
mkdir -p /etc/opt/novell/ncl
echo Allow_Integrated_Login=true >/etc/opt/novell/ncl/login.conf
echo Default_Tree=XXXXX >>/etc/opt/novell/ncl/login.conf
echo Default_Context=XXX.XXX.XXX >>/etc/opt/novell/ncl/login.conf
echo Default_Server=servername >>/etc/opt/novell/ncl/login.conf
echo DHCP_Tree=true >/etc/opt/novell/ncl/protocol.conf
echo DHCP_Server=true >>/etc/opt/novell/ncl/protocol.conf
[CODE]
(reboot)
These are files installed during build stage, but are used when the client logs in.
in /etc/skel/.novell/ncl, i have a copy of StartupLogin.conf as StartupLogin.conf.new
this file has information in it, but it will be wiped.
in /etc/skel/.kde4/Autostart/logon.sh, i have
Code:
if [ ! ~/.novell/ncl/StartupLogin.conf.new ]; then
mv ~/.novell/ncl/StartupLogin.conf.new ~/.novell/ncl/StartupLogin.conf
FDN=`ldapsearch -x -h 10.251.1.99 -b ou=its,o=fca | grep -i 'dn:' | grep -i $USER | grep -iv workstation`
CONTEXT=`echo $FDN | cut -d, -f2- | sed -e 's/ou=//ig' -e 's/o=//ig' -e 's/,/./ig'`
sed -i "s/UserName.*/UserName = $USER/" ~/.novell/ncl/StartupLogin.conf
sed -i "s/FDN.*/FDN = $FDN/" ~/.novell/ncl/StartupLogin.conf
sed -i "s/Context.*/Context = $CONTEXT/" ~/.novell/ncl/StartupLogin.conf
sudo /bin/update_login.conf.sh $CONTEXT
fi # if [ ! ~/.novell/ncl/StartupLogin.conf.new ];
/bin/update_login.conf.sh has the following and has '%users ALL=(root) NOPASSWD:/bin/update_login.conf.sh' added to /etc/sudoers
Code:
if [ ! -z "$1" ];then
sed -i "s/Default_Context=.*/Default_Context=$1/" /etc/opt/novell/ncl/login.conf
fi
So far this is working well.
The novell login needs to be run once, and on the advanced tab, have the session saved. This then auto runs afterwards for each logon.
as a troubleshooting tool, I :
Code:
cp /etc/etc.1
rsync -avP etc* my-pc:/tmp/
i can then use krusader to compare files (on my-pc), but most importantly, after doing something (eg yast ldap). rerun the rsync line and and it will tell exactly which file(s) changed, so you know which ones to check/keep/alter/etc
hope this helps.
ph

Ping authorization via e-mail doesn't work. I have an iTunes account but must seek authorization for Ping. I don't know why this is but I never get an e-mail message with the link. Why?

Hi. I use iTunes for podcasts and to burn MP3s from audible.com. It works great except PING. I need to confirm my identity to the PING server. It purports to sen me an e-mail but I never get it. Why is this?

Hello Ulrich,
thank you for your answer. Concerning the dataflow I agree and it is what I usually do. Actually I follow the dataflow paradigm whenever there is no problem (the 'false case' in the screenshot):
“FW102x Initialize.vi” -> “FW102x Get Position.vi” -> “FW102x Set Position.vi”.
Whenever there is a mistake, this just doesn't work with these drivers. The sequence
“FW102x Initialize.vi” -> “FW102x Get Position.vi” -> ///error/// -> “FW102x Close.vi”, “FW102x Reset.vi” ;; “FW102x Initialize.vi”
will give me errors for “FW102x Close.vi”, “FW102x Reset.vi” and “FW102x Initialize.vi” reporting "session handle not valid". However, if I "bypass" the instrument handles directly from the first "Initialize" to "Close" and "Reset", they will report the same error, but the second "Initialize" will work again. I can even merge the first two frames and execute "Close" and "Reset" at the same time to do so. But whenever I try something else, e.g. do the 'correct' wiring, I am unable to close, reset or reinitialize. I have to restart LabView completely, to make the vi work again. So I guess the session is still hanging around somewhere in memory, but I can't access it anymore.
Surprisingly, wherever I put Probes on the data handle wires they show the correct "ASRL5::INSTR" (with or without correct wiring). But only the "Bypass" wire makes the vi work. Since you couldn't find the drivers in the driver network, I guess they might just run into problems, if an error occurs.
But thanks for your comment anyway. The problem is fixed for the moment. It's just that I prefer to actually know what I am doing here instead of producing some code I'd rather not show anyone.
Carsten

My hotspot is turned off. Other household iphone can turn my hotspot on and don't get asked for a password. Any way to change this?

I have iphone 6, my son has iphone 5c. My hotspot is turned off. My son gets option to tether to my hotspot, if he clicks on that then it remotely turns my hotspot on! Can other iphone users do the same? Worried about other people using all my data.

The password for the hotspot will remembered by the devices that have connected to your hotspot.
If you can't reset the network settings on those devices, which would also delete all network passwords on those, just chafe the hotspot password on your phone in Settings/Hotspot/Wi-Fi password.

I have been having searching signal on my phone for the past 2 days! Does any one know why this is happening?

I have had the searching signal on my phone for the past two days, does any one know how I can fix this issue?

Hello Azdor,
Thank you for using Apple Support Communities.
For more information, take a look at:
iPhone: Troubleshooting No Service
http://support.apple.com/kb/ts4429
Have a nice day,
Mario

I want to install windows7 on my 27in iMAC. I have an OEM version of Win7 which is win pro 7, 64 bit english. I will use boot camp to partion the hard drive for a win7 install. Can I use this version for the installation ??

My iMAC is a 2011 3.4 GHz intel i7 based with a 27in display. A year ago, I bought a Microsoft win pro 7 64-bit english OEM OS to install over a newly assembled AMD PC. I never installed it. Now, I want to put it on my iMAC using either Apple Bootcamp or Parallels. The win 7 OEM package has a lot of verbage about using an OEM preinstallation kit (OPK) and that it must be preinstalled on the hard drive. Is it OK to install this win7 version following the Bootcamp instructions.?
K6JPJ

Please post in the Boot Camp (not Bootcamp) forum I'm sure someone there can answer your quesiton if no one here is able to.

What should be the reason for " ERROR 1004" ? Any means to sort this issue. It comes up on my screen when i try downloading any application through my ipfone 4

Hi guys,
I find diffficulty downloading applications from appstore to my fone directl
Each and every time it shows " ERROR 1004 "
Cant understand what to be done.

shaminsharaf wrote:
Hi guys,
I find diffficulty downloading applications from appstore to my fone directl
Each and every time it shows " ERROR 1004 "
Cant understand what to be done.
I think this is your fix...
http://support.apple.com/kb/TS1275

Air 3 for Linux

i m trying to get my hand on Air3 runtime for Linux, as it fixes a lot of graphic refresh issues, i know Adobe do not support it but i thought third parties did.
This link says it does but it's actually 2.6
http://fileforum.betanews.com/detail/Adobe-AIR-Runtime-for-Linux/1258475419/3
We use Adobe Robohelp do generate Airhelp and our 500 + employees are all using Linux.
I have no problem with Adobe stopping further Air for Linux dev... But they could at least let us package the runtime rpm ourselves...
The press release mentionned that only 1 percent of their Air runtime download was for Linux ! They forgot to mention that this 1 percent was their largest clients.
We use to download 1 rpm, and later on installed it on 500 machines...
Will the Air source code only accessible to mobile partners ?
Thanks much
Thomas

Hi Thomas,
I don't have any new AIR Linux information to give out, but I'd suggest reposting this over on the AIR blog. I'll also ping our PM team to see if they have anything new that might help.
Chris

Novell Client for Linux on OpenSUSE 12.1

Hello everyone,
I'm looking for some information on getting the last release (2.0 SP2) of the Novell Client for Linux to install and run on OpenSUSE 12.1. Has anybody been able to do this yet?
Thanks

Yep,
However, openSUSE 12.1 comes with kernel 3.1.x . Come on guys, I would do it myself if I had the source code...
Originally Posted by W_Prindl
But it installs nice on SLED 11.2 , which also uses a 3.x (3.0.x)
kernel.
But the SLED 11.2 Novell Client version is 3.0.0-0.18.20.7 and this is
not available as a seperate download.
W. Prindl
Simon Flood wrote:
>On 16/03/2012 14:46, SylvainL wrote:
>
>>I'm looking for some information on getting the last release (2.0
>>SP2) of the Novell Client for Linux to install and run on OpenSUSE
>>12.1. Has anybody been able to do this yet?
>
>I believe the current Novell Client for Linux will not install on
>openSUSE 12.1 because of the move to using kernel 3.x.
>
>I've asked my contacts at Novell but in the meantime you should be
>able to install the ncpfs package and use ncpmount.
>
>HTH.

Where download Oracle 10g R1 For linux RH4 64

I want to install Oracle database 10g R1 on Linux RH4 x86 64.
But i cant find product.
Where can i download Oracle 10g Release1 for Linux x86 64 Bits???
Thank's

>
I want to install Oracle database 10g R1 on Linux RH4 x86 64.
But i cant find product.
Where can i download Oracle 10g Release1 for Linux x86 64 Bits???
>
The only version supported and available at the moment is 10gR2.
Please see {thread:id=1043805} for more details. Any particular details why you specifically want to download 10gR1?
Regards,
Phiri

OID 10.1.4.2.0 for Linux Preview Install : Any insight on why this fails?

Similar Messages

Maybe you are looking for