Oid and sso configuration in ebs

Hi,
how to configure the sso and oid for EBS.i red the metalink id 261914.1.i could n't able to understand.
Os : red hat 4.2
application server10.1.2: oraapps.yantro.com
ebs suite 11.5.10 :ebs.yantro.com
how to achieve that
and also we need portal and discover.
please help me out that.

Hi,
how to achieve thatYou will have to install Oracle Applications Server as per (Note: 233436.1) then do the integration part as per the document attached in the note.
and also we need portal and discover.Both are optional.
Regards,
Hussein

Similar Messages

Install Forms and Report 11g, Weblogic, OID and SSO ?

Hello,
I want to migrate our system from Forms and Reports 6i to 11g with weblogic server 10.3.3 and I have two questions:
1st: If we considered to obtain a system consists of (Weblogic 11g + Forms and Reports 11g + OID + SSO + Weblogic Portal + BI Publisher)
What is the steps and the sequence of products installation and configuration, and what is the required versions of each one ?
2nd: Can I abandon OID and SSO, is there a substitute ?
If so, what's the steps and the sequence of products installation and configuration ?
Thank you very much

>
You use the Oracle WebLogic Server installer to install Oracle WebLogic Server and to create a Middleware home (which is required before you can install Oracle Forms and Reports).
For Oracle Forms and Reports 11g Release 2 (11.1.2), download Oracle WebLogic Server 11g (10.3.5) from OTN or Oracle Software Delivery Cloud.
Be sure to select the proper Oracle WebLogic Server installer for your platform.
>
weblogic you can download from http://www.oracle.com/technetwork/middleware/ias/downloads/wls-main-097127.html

RFC and SSO Configuration

Hi guys,
Is it possible to configure RFC and OSS connection between to sap systems that they are not on the same domain?
Thanks

Hi Reza,
I believe it should work. Pls check this also;
http://help.sap.com/saphelp_nw04/helpdata/en/b8/9ba340fa432b54e10000000a1550b0/content.htm
Thanks and Regards,
Shyam.

Oracle Forms 11g SSO with OID and IAM

What versions of OID and Access Manager are required to get an Oracle Forms and Reports 11.1.1.2 application
on Weblogic 10.3.2 configured for Oracle SSO using OID authentication?
We want the OID to store and authenticate Users for username and password logins to the database, then
ultimately by user Certificate authentication in OID. I have OID 11.1.1.2 installed and SSO enabled for Forms
in Enterprise Manager.
Is Access Manager required for Forms SSO with OID authentication to work or just to allow user interaction
for registration and Password reset?
Things mention OAM 10.4.3 and others talk about IAM 11g for Forms 11.1.1.2 SSO to work with OID.
We did this back in Oracle Forms and OID 10g with JSP and LDAP to setup users but I understand 11g is
different and IAM can help or is required for this type of SSO to work.
Any help?
Edited by: Kirch on Apr 30, 2013 7:39 AM

Hi,
According to Oracle's certification matrix found at http://www.oracle.com/technetwork/middleware/downloads/fmw-11gr1certmatrix.xls, Oracle Forms 11.1.1.2 is not supported to use any Oracle Access Manager (OAM) version. OAM is a component of IAM. It is only supported with Oracle SSO 10.1.4.x. The best solution would be to upgrade the Forms and Reports environment to either 11gR2 (11.1.2.1) or to the latest 11gR1 patchset 11.1.1.7. Both versions are compatible with OAM 11.1.1.7.0 and OID 11.1.1.7.0 where only Forms 11gR2 (11.1.2.1) is compatible with OAM 11.1.2.0 and OID 11.1.1.7.0. That would be the best solution as we have ran into configuration problems in the past with using Oracle SSO 10.1.4.x.
Since OID 11.1.1.2.0 is already installed, you should be able to patch it up to 11.1.1.7.0.
For user authentication in OID, it is required to have OAM or Oracle SSO as both products use WebGate or mod_osso agents for authentication and authorization. For purposes of allowing end users to register accounts and password reset, you will either need to also install another IAM component called Oracle Identity Manager (OIM) or create a customized SSO login page that can be coded to perform these actions. I believe there are some examples available on the Internet.
Thanks,
Scott
http://pitss.com/us

ISupplier, OID,SSO on 11i EBS

Hi Gurus
I have a client requirement to implement i-Supplier module,OID/SSO on 11i EBS
Can any one please help me to implement this process. This is very urgent.
I have posted this in OA framework discussion, but haven't got any response.
Thanks
Keven

Keven,
Please do not create duplicate posts -- Unable to create user in R12.1.1 connected with SSO/OID
Just update the original post instead of creating a new one. And, if the replies were not helpful, please log a SR as suggested before.
Thanks,
Hussein

Help! : Install and configuration of OID and LDAP

Hi,
I'm trying to install OID and run a LDAP server.
I installed OID in my 9iR2 database, it seems ok.
When I try to connect in ODM, it says 'LDAP server not running'... I don't find in Control panel/services any service naming like 'LDAP' (I just find "ODS_sid" who is runnig), is there something I forgot to install ??
In the same way I haven't any tables in ODS/ODS@my_sid, is it normal ??
Thanks in advance,
Sandrine

Hi Diego,
The maximum number of concurrent users logged on allowed by the current license keys has been reached.
Attempt to log on later after other users have logged off, or upgrade the license keys.
Or you can get in touch with your Accounts Manager to check the license keys, whether they have been expired, or need to be upgraded.
-Shreyash

How can we get ADFSecurity work when used in OC4J, OID and OAM?

I am getting error in http server log "mod_oc4j: Response status=499 and reason=Oracle SSO, but failed to get mod_osso global context."
But I am not using Oracle SSO and my client doesn't want to use it either, I am using OAM SSO(CoreIDSSO) in my configuration. Please read the details below.
I am using ADFSecurity in an app that is protected by OAM. To migrate ADFSecurity permissions from
system-jazn-data.xml to OID, I used JAZNMigrationTool to populate OID with Grantees and Permissions. OAM gives login page, and authentication works fine.
But ADFSecurity is not working. ADFComponent Delete button is enabled even for roles that dont have permissions for the iterator delete.
- The app works fine when I use without OAM. ADF Security permissions work fine.
- The app works fine when used with OAM, but with ADFSecurity disabled (enforce=false).
- When I enforce ADFSecurity alongwith OAM, ADFSecurity is not working.
In the doc "Oracle Containers for J2EE Security Guide b28957", there is a mention of use of CoreIDPrincipal for permissions. Our OID Permissions entries show
LDAPRealmRole for attribute orcljaznprincipal. I am not sure if this could be the reason.
We have configured AccessServerSDK for the SOA instance and have policy for the urls in the policy manager. We have entries in orion-application.xml, orion-web.xml and system-jazn-data.xml as per the documentations.
How can we get ADFSecurity work when used with OID and OAM?

Have you been able to successfully integrate OAS with OAM & OID? We have similar requriement and so far we have not been able to get it working.
We have application specific roles which we map to OID roles using orion-application.xml.
Any pointers to achieve this would be greatly appreciated.
thanks,
Dipal

Issue while integrating OID and BPEL.

Issue while integrating OID and BPEL.
We followed steps mentioned in for integration. WE have two SoA instances, home, oc4j_soa.
http://download-uk.oracle.com/docs/cd/B31017_01/integrate.1013/b28982/service_config.htm#BABIBGFF
Before running configure_oid.bat script, we changed jazn.xml to include the contents that are available in home\jazn.xml.
The contents we replaced contain
<jazn xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://xmlns.oracle.com/oracleas/schema/jazn-10_0.xsd" schema-major-version="10" schema-minor-version="0" provider="LDAP" location="ldap://myhost:389" default-realm="my-realm" >
     <property name="custom.sso.url.login" value="/jsso/SSOLogin" />
     <property name="ldap.user" value="orclApplicationCommonName=jaznadmin2,cn=JAZNContext,cn=products,cn=OracleContext" />
     <property name="ldap.password" value="{903}dA0r1HydR5qIhjAn2OCLMSWlFXeLdV//sCLFNwSfWhE=" />
     <property name="custom.sso.key.alias" value="ssoSymmetricKey" />
     <property name="idm.token.asserter.class" value="oracle.security.jazn.sso.SSOCookieTokenAsserter" />
     <property name="idm.token.collector.class" value="oracle.security.jazn.sso.SSOCookieTokenCollector" />
     <property name="idm.token.type" value="HTTP_COOKIE" />
     <property name="idm.token.collector.cookie.1" value="ORA_OC4J_SSO" />
     <property name="custom.sso.url.logout" value="/jsso/SSOLogout" />
     <property name="ldap.protocol" value="no-ssl" />
     <property name="idm.authentication.name" value="JavaSSO" />
</jazn>
configure_oid.bat ran successfully.
But when we try restarting SoA, it gives error. If we replace the above to point to XML-based jazn then SoA starts succcessfully.
Please let us know if we are missing anything.
Regards
Yatan

*1.) No I am not able to complete 2.1.3.3 step 3 the*
work list application is showing "authentication fail"
user look up is showing "unable to find the realm with name my-realm "
*2.) After 2.1.3.3 step 2, if I try restarting the SOA suite, it throws following error.*------------------------------------------------------------------------------------------------------------------------------------------------------------
Configuration information
Running in C:\product\10.1.3.1\OracleAS_1
Operation mode:Startup, App Server, No Enterprise Manager, Single Instance
Oracle home:C:\product\10.1.3.1\OracleAS_1
Oracle home name:Unnamed
Instance name:ias_soa.myhost
Instance type:allProducts
Version:10.1.3.1.0
Uses infrastructure:false
Not an infrastructure instance, no infrastructure information available
Components:[j2ee, apache, orabpel, oraesb, owsm, Wsil]
2009-06-29 04:10:49.962--Begin log output for Mid-tier services (ias_soa.myhost)
2009-06-29 04:10:49.962--Processing Step: starting OPMN
2009-06-29 04:10:57.493--Processing Step: starting OPMN managed processes
2009-06-29 04:11:22.806--End log output for Mid-tier services (ias_soa.myhost)
An unknown OPMN error has occured
oracle.appserver.startupconsole.model.ConsoleException: An unknown OPMN error has occured
     at oracle.appserver.startupconsole.control.OPMNController.doStart(OPMNController.java:140)
     at oracle.appserver.startupconsole.control.Controller.start(Controller.java:69)
     at oracle.appserver.startupconsole.control.GroupController.doStart(GroupController.java:47)
     at oracle.appserver.startupconsole.control.Controller.start(Controller.java:69)
     at oracle.appserver.startupconsole.view.controller.ControllerAdapter.start(ControllerAdapter.java:30)
     at oracle.appserver.startupconsole.view.controller.MasterControlAdapter.run(MasterControlAdapter.java:94)
     at oracle.appserver.startupconsole.view.Runner.main(Runner.java:39)
Caused by: oracle.appserver.startupconsole.model.ConsoleException: There are some errors while stopping the following components. Refer to the generated error report for more details.
==================================================
ias-component: default_group
process-type: oc4j_soa
process-set: default_group
Error Message:failed to start a managed process after the maximum retry limit
==================================================
     at oracle.appserver.startupconsole.control.OPMNController.doStart(OPMNController.java:139)
     ... 6 more
Caused by: oracle.ias.opmn.optic.OpticControlException: Error from opmn during process control operation
     at oracle.ias.opmn.optic.AbstractOpmnEntity.runCommand(AbstractOpmnEntity.java:174)
     at oracle.ias.opmn.optic.AbstractOpmnEntity.start(AbstractOpmnEntity.java:110)
     at oracle.appserver.startupconsole.control.OPMNController.doStart(OPMNController.java:97)
     ... 6 more
Exception caused by
There are some errors while stopping the following components. Refer to the generated error report for more details.
==================================================
ias-component: default_group
process-type: oc4j_soa
process-set: default_group
Error Message:failed to start a managed process after the maximum retry limit
==================================================
oracle.appserver.startupconsole.model.ConsoleException: There are some errors while stopping the following components. Refer to the generated error report for more details.
==================================================
ias-component: default_group
process-type: oc4j_soa
process-set: default_group
Error Message:failed to start a managed process after the maximum retry limit
==================================================
     at oracle.appserver.startupconsole.control.OPMNController.doStart(OPMNController.java:139)
     at oracle.appserver.startupconsole.control.Controller.start(Controller.java:69)
     at oracle.appserver.startupconsole.control.GroupController.doStart(GroupController.java:47)
     at oracle.appserver.startupconsole.control.Controller.start(Controller.java:69)
     at oracle.appserver.startupconsole.view.controller.ControllerAdapter.start(ControllerAdapter.java:30)
     at oracle.appserver.startupconsole.view.controller.MasterControlAdapter.run(MasterControlAdapter.java:94)
     at oracle.appserver.startupconsole.view.Runner.main(Runner.java:39)
Caused by: oracle.ias.opmn.optic.OpticControlException: Error from opmn during process control operation
     at oracle.ias.opmn.optic.AbstractOpmnEntity.runCommand(AbstractOpmnEntity.java:174)
     at oracle.ias.opmn.optic.AbstractOpmnEntity.start(AbstractOpmnEntity.java:110)
     at oracle.appserver.startupconsole.control.OPMNController.doStart(OPMNController.java:97)
     ... 6 more
<?xml version='1.0' encoding='WINDOWS-1252'?>
<response>
<msg code="-82" text="Remote request with weak authentication.">
</msg>
<opmn id="bg1ws0008:6201" http-status="206" http-response="2 of 3 processes started.">
<ias-instance id="ias_soa.myhost">
<ias-component id="default_group">
<process-type id="home">
<process-set id="default_group">
<process id="91427687" pid="4148" status="Alive" index="1" log="C:\product\10.1.3.1\OracleAS_1\opmn\logs\\default_group~home~default_group~1.log" operation="request" result="success">
<msg code="0" text="">
</msg>
</process>
</process-set>
</process-type>
<process-type id="oc4j_soa">
<process-set id="default_group">
<process id="91427688" pid="5856" status="Init" index="1" log="C:\product\10.1.3.1\OracleAS_1\opmn\logs\\default_group~oc4j_soa~default_group~1.log" operation="request" result="failure">
<msg code="-21" text="failed to start a managed process after the maximum retry limit">
</msg>
</process>
</process-set>
</process-type>
</ias-component>
<ias-component id="HTTP_Server">
<process-type id="HTTP_Server">
<process-set id="HTTP_Server">
<process id="91427686" pid="5140" status="Alive" index="1" log="C:\product\10.1.3.1\OracleAS_1\opmn\logs\\HTTP_Server~1.log" operation="request" result="success">
<msg code="0" text="">
</msg>
</process>
</process-set>
</process-type>
</ias-component>
</ias-instance>
</opmn>
</response>
*3.) opmnctl status -all ?*
C:\product\10.1.3.1\OracleAS_1\opmn\bin>opmnctl status -all
Usage:
opmnctl [<scope>] status [<options>] [host port]
Notes:
- if host,port is specified, contact opmn on host,port;
otherwise, contact opmn in local ias instance.
scope:
@instance(:name)*|@cluster
scope specifies how far to apply the query. To apply the query to
all known iAS Instances, specify "cluster". To apply the query
to a specific set of 1 or more iAS Instances, specify
"instance(:instname(:instname...))". If no names are supplied
in an instance scope string then the request is applied to the
"local" instance. In this context, "local" means the instance
containing the opmn server handling the request.
Default: local iAS Instance.
Options:
[ias-component|oc4j-group]=id
- filter output by ias-component name
- i.e. filter output by oc4j-group name
-l - pre-selected long output format:
%cmp32%prt18%pid7R%sta8%uid10R%mem8R%utm9R%por
-fmt <fmtlist> - output format (see details below)
Option "-fmt <fmtlist>" and "-l" are mutually exclusive
-fsep <string> - field separator (default:" | ")
-rsep <string> - record separator (default:"\n")
-noheaders - don't print a header
-c <count> - number of times to print status (default:1)
-i <nsecs> - seconds between each print (default:5)
-app [-l] - application status (optional long format)
-port - opmn "request" host and port (scope
argument invalid)
Format String Syntax:
<fmtlist> - A single string containing one or more statistic
identifiers concatenated together where each identifier has
the following format: %<statname>[<width>[<justification>]]
default: %cmp32%prt18%pid7R%sta8
<statname> - Must be one of the following:
ins - iAS Instance Name
cmp - iAS Component Id
prt - Process Type Id
prs - Process Set Id
idx - Index of process in Process Set
pid - OS Process Identifier
uid - Opmn Unique Id
typ - Name for this kind of process
sta - Process status
stm - start time (ms)
utm - up time (ms)
cpu - cpu time (ms)
mem - memory used (Kb)
pme - private memory (Kb)
sme - shared memory (Kb)
hpz - heap size (Kb)
por - Port List
<width> - The number of columns to use for this field. Output
less than this value will receive padding according to the
specified justification. Output more than this value will
be truncated and terminated with '~'.
default: the width of each datum
<justification> - How to justify output when less than the width.
Must be L, R, or C (left, right, or center justification).
default: L
4.) SOA Suite version ? *10.1.3.1.0*
5.) Did you manually tweak some configuration file or followed the documentation as it is ? I have followed the document as it is.
I have changed only jazn.xml available in ..j2ee/oc4j_soa suite to have the below section: This section was copied from jazn.xml of ..j2ee/home directory that has been automatically updated after running configure_oid.bat file
<jazn xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://xmlns.oracle.com/oracleas/schema/jazn-10_0.xsd" schema-major-version="10" schema-minor-version="0" provider="LDAP" location="ldap://myhost:389" default-realm="myrealm" >
     <property name="custom.sso.url.login" value="/jsso/SSOLogin" />
     <property name="ldap.user" value="orclApplicationCommonName=jaznadmin2,cn=JAZNContext,cn=products,cn=OracleContext" />
     <property name="ldap.password" value="{903}dA0r1HydR5qIhjAn2OCLMSWlFXeLdV//sCLFNwSfWhE=" />
     <property name="custom.sso.key.alias" value="ssoSymmetricKey" />
     <property name="idm.token.asserter.class" value="oracle.security.jazn.sso.SSOCookieTokenAsserter" />
     <property name="idm.token.collector.class" value="oracle.security.jazn.sso.SSOCookieTokenCollector" />
     <property name="idm.token.type" value="HTTP_COOKIE" />
     <property name="idm.token.collector.cookie.1" value="ORA_OC4J_SSO" />
     <property name="custom.sso.url.logout" value="/jsso/SSOLogout" />
     <property name="ldap.protocol" value="no-ssl" />
     <property name="idm.authentication.name" value="JavaSSO" />
</jazn>
instead of
<jazn xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://xmlns.oracle.com/oracleas/schema/jazn-10_0.xsd" schema-major-version="10" schema-minor-version="0" provider="XML" location="./system-jazn-data.xml" default-realm="jazn.com">

     <property name="idm.authentication.name" value="JavaSSO"/>
     <property name="idm.token.asserter.class" value="oracle.security.jazn.sso.SSOCookieTokenAsserter"/>
     <property name="idm.token.collector.class" value="oracle.security.jazn.sso.SSOCookieTokenCollector"/>
     <property name="idm.token.type" value="HTTP_COOKIE"/>
     <property name="idm.token.collector.cookie.1" value="ORA_OC4J_SSO"/>

     <property name="custom.sso.url.login" value="/jsso/SSOLogin"/>
     <property name="custom.sso.url.logout" value="/jsso/SSOLogout"/>
     <property name="custom.sso.key.alias" value="ssoSymmetricKey"/>
</jazn>

Sso configuration assistant failed

my envirament is redhat AS4 + oracle 10.1.0.4.2
MR and OID are installed in different PC. There is no problem when I install the MR,but the "sso configuration assistant failed " alway appear when I install OID.
the installation log is as fllow:
Configuration assistant "Single Sign-On Configuration Assistant" failed
================================================================================================================
Output generated from configuration assistant "Single Sign-On Configuration Assistant" (attempt 4):
CLASSPATH=/home/oracle/OraHome_1/jlib/repository.jar:/home/oracle/OraHome_1/sso/lib/ossoca.jar:/home/oracle/OraHome_1/lib/xmlparserv2.jar:/home/oracle/OraHome_1/jdbc/lib/classes12.jar:/home/oracle/OraHome_1/jdbc/lib/nls_charset12.jar:/home/oracle/OraHome_1/jlib/jndi.jar:/home/oracle/OraHome_1/jlib/ojmisc.jar:/home/oracle/OraHome_1/j2ee/home/jazn.jar:/home/oracle/OraHome_1/j2ee/home/jaas.jar:/home/oracle/OraHome_1/jdk/lib/rt.jar:/home/oracle/OraHome_1/jdk/lib/i18n.jar:.:/home/oracle/OraHome_1/sysman/webapps/emd/WEB-INF/lib/emd.jar:/home/oracle/OraHome_1/dcm/lib/dcm.jar:/home/oracle/OraHome_1/sysman/webapps/emd/WEB-INF/lib/portalSMI.jar:/home/oracle/OraHome_1/jlib/emConfigInstall.jar:/home/oracle/OraHome_1/lib/dms.jar:/home/oracle/OraHome_1/opmn/lib/ons.jar:/home/oracle/OraHome_1/j2ee/home/oc4j.jar:/home/oracle/OraHome_1/jlib/ojmisc.jar:/home/oracle/OraHome_1/j2ee/home/jaznplugin.jar:/home/oracle/OraHome_1/sysman/webapps/emd/WEB-INF/lib/click-agent.jar:/home/oracle/OraHome_1/sso/conf:/home/oracle/OraHome_1/sysman/webapps/emd/WEB-INF/lib/disco_dsc_smi.jar:/home/oracle/OraHome_1/sysman/webapps/emd/WEB-INF/lib/f90em.jarParameters passed to ssoca : param0:config param1:/home/oracle/OraHome_1 param2:cn=orcladmin param3:***** param4:"AMERICAN_AMERICA.WE8ISO8859P1" param5:http param6:localhost.localdomain param7:7777 param8:en
Wed Aug 11 19:50:56 PDT 2010
Parameters received by ssoca : param0:config param1:/home/oracle/OraHome_1 param2:cn=orcladmin param3:***** param4:"AMERICAN_AMERICA.WE8ISO8859P1" param5:http param6:localhost.localdomain param7:7777 param8:en Content of ssoca config file is :
-- listing properties --
config_sso_oid=true
config_lang=true
config_sso_seed=true
config_targets_xml=true
config_ssoupg=true
config_dad=true
config_em_integ=trueSSO seed is already configured in the database.ACTION by SSOConfigAssistant :
/home/oracle/OraHome_1/bin/sqlplus [email=orasso/*****@]orasso/*****@"cn=wmz,cn=oraclecontext[email]"
@/home/oracle/OraHome_1/sso/admin/plsql/sso/ssooidd.sql localhost.localdomain 636 "cn=orcladmin" ***** Y
SQL*Plus: Release 10.1.0.4.2 - Production on Wed Aug 11 19:50:58 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
SQL> Connected.
SQL> Creating OID entries for SSO
Error code : 1
Error message: User-Defined Exception
LDAP error : ORA-31203: DBMS_LDAP: PL/SQL - Init Failed.
ERROR: deleting application entry
Error code: 1
Error message: User-Defined Exception
ERROR: creating SSO users and groups in OID
PL/SQL procedure successfully completed.
*** Refreshing WWC OID cache....***
declare
ERROR at line 1:
ORA-06510: PL/SQL: unhandled user-defined exception
ORA-06512: at "ORASSO.WWSEC_OID", line 1199
ORA-06512: at "ORASSO.WWSEC_OID", line 1328
ORA-06512: at "ORASSO.WWSEC_OID", line 2498
ORA-06512: at "ORASSO.WWSEC_OID", line 2528
ORA-06512: at "ORASSO.WWSEC_OID", line 1606
ORA-06512: at "ORASSO.WWSEC_OID", line 1755
ORA-06512: at "ORASSO.WWSEC_OID", line 2133
ORA-06512: at line 8
No errors.
Disconnected from Oracle Database 10g Enterprise Edition Release 10.1.0.4.2 - Production
With the Partitioning, OLAP and Data Mining options
NLS_LANG character set = AL32UTF8
NLS_LANG param = AMERICAN_AMERICA.AL32UTF8/home/oracle/OraHome_1/jdk/bin/java
-cp
/home/oracle/OraHome_1/lib/xmlparserv2.jar:/home/oracle/OraHome_1/sysman/webapps/emd/WEB-INF/lib/emd.jar:/home/oracle/OraHome_1/sysman/webapps/emd/WEB-INF/lib/log4j-core.jar:/home/oracle/OraHome_1/lib/emSDK.jar
-DORACLE_HOME=/home/oracle/OraHome_1
oracle.sysman.emSDK.conf.TargetInstaller
deletetarget
oracle_sso_server
wmz_oid.localhost.localdomain_Single Sign-OnrassoSetting the AS product version value in targets.xml to be "10.1.2.0.2".
Calling method getASTargetInfo.
getASTargetInfo: oracleHome = "/home/oracle/OraHome_1".
getASTargetInfo: iasName = "wmz_oid.localhost.localdomain".
getASTargetInfo: iAS Target Type = "oracle_ias".getASTargetInfo: StatusURL value = "http://localhost.localdomain:7777".
Retrieved SSO protocol, host, and port info from targets.xml.
The values are: "http://localhost.localdomain:7777".
The following values will be used to configure the sso_server target entry in targets.xml.
Protocol: "http".
Hostname: "localhost.localdomain".
Port: "7777".
/home/oracle/OraHome_1/jdk/bin/java
-cp
/home/oracle/OraHome_1/lib/xmlparserv2.jar:/home/oracle/OraHome_1/sysman/webapps/emd/WEB-INF/lib/emd.jar:/home/oracle/OraHome_1/sysman/webapps/emd/WEB-INF/lib/log4j-core.jar:/home/oracle/OraHome_1/lib/emSDK.jar
-DORACLE_HOME=/home/oracle/OraHome_1
oracle.sysman.emSDK.conf.TargetInstaller
addtarget
/home/oracle/OraHome_1/sso/sso_server_target2add.xmlConfiguring SSO languages with the following language code:
us Language us is already installed.About to execute java call using emConfigInstall.jar.
Here are the arguments:
/home/oracle/OraHome_1/jdk/bin/java
-DORACLE_HOME=/home/oracle/OraHome_1
-jar
/home/oracle/OraHome_1/jlib/emConfigInstall.jar
consolesn
/home/oracle/OraHome_1/sso/conf/consoleConfigSNSegment.xml
Finished executing the call.Child Process has exited.
SSO Configuration Assistant failed.
Configuration assistant "Single Sign-On Configuration Assistant" failed
=============================
Can someone help me?

I had the similar issue and same error mesaage.
One of the possible reason is the DNS and/or host file configuration.
If the OID/SSO and metadata repository are on two different servers, make sure for both servers, the entries IP <fully qualified hostname> <Alias> reflects in host file of each of them.
Simply click retry and the install should run to completion.
Good Luck!

Integrating EBS12 with OID and Oracle Single Sign-On

Hi All,
I recently installed EBS12 and followed all the instructions on metalink note 376811.1 to integrate it with OID and OSSO server.
At the end of integration to verify SSO integration with EBS12, when I access EBS login page via http://[host]:[port]/OA_HTML/AppsLogin, the following error message is displayed:
<< Start of Error Message>>
500 Internal Server Error
java.lang.NoClassDefFoundError
at oracle.apps.fnd.sso.AppsLoginRedirect.AppsSetting(AppsLoginRedirect.java:120)
at oracle.apps.fnd.sso.AppsLoginRedirect.init(AppsLoginRedirect.java:161)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpApplication.loadServlet(HttpApplication.java:2231)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpApplication.findServlet(HttpApplication.java:4617)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpApplication.findServlet(HttpApplication.java:4541)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpApplication.getRequestDispatcher(HttpApplication.java:2821)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:740)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:451)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:299)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:187)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
<< End of Error Message>>
Please let me know what can be the cause of this error?
Thanks,
Shyam

PLease use NOTE.249669.1 How To Collect Apache and Jserv Debugging Details
You will collect more informations.

Oracle9iAS R2 - Virtual Hosts with Portal and SSO with OIDDAS application

Hi!
I have installed a the machine with name minsk.discover.local. The machine have installed Infrastructure and Portal. The instalation is sucessfull and i work fine. But i have publish Portal to WEB with name intranet.discover.com.br. The Oracle describe:
1 - Create the virtual hosts in SSO and PORTAL - OK
2 - run ptlasst to create SSO Partners Applications - OK
After this steps iwork fine with Portal and SSO, but when i click in portlet to create user to access the application OIDDAS, the Portal redirect to login page of SSO in address mct.com.br, the internal name, when then name not responde in the internet.
I need a help!!!!
Marcio Mesti

I just spoke to the Oracle App server admins, the two servers in question are clustered.
So my question changes slightly to:
What is the best way to install and configure a webgate for clustered Oracle App servers with mulitple virtual hosts, that are residing behind a load balancer (Traffic Manager)?
Thanks,
Andy

Authentication to XML DB via WebDAV and SSO

Hi,
Is there any way to be authentified by XML DB via WebDAV and SSO ?
If the access to our infrastructure of database servers is controled by SSO, once I'm authentified by OID (SSO), is it possible to pass that authentification to XML DB through standard port 8080 ?
Thank you for your help

This is planned for a future (not 10g) release

SSO Configuration for HWC applications

How to Configure SSO for HWC applications? we are configuring HTTP Authentication in SCC for Single SignOn but not been successful. Debugging the issue we found that MYSAPSSO2 cookie is not being returned.and SSO is not configured in SAP .
How to enable SSO in HWC apps.
What are the Other options to ask password in HWC apps( adding additional Security Layers)

Kunal raman
You/BASIS admin can check in that particular SAP system.
Go to Transacation RZ10
Select Instance Profile as shown in the below diagram
3
3 .Click on Display
4. Then you can see parameter name and its value as below
Rgrds,
Jitendra

Unable to view BI Publisher report with SSO configuration enabled

Hi All,
Can anybody let us know the configuration of the BI publisher with SSO enabled. We are unable to see any of the BI Publisher reports. without SSO configuration we have integration working perfectly fine with the OBIEE and Publisher.
We followed the configuration steps to integrate BI Publisher with Oracle SSO. The following are the steps:
1. deploy analytics.ear as a new application 'analyticsSOAP' in OAS
2. protect analyticsSOAP in mod_osso.conf file under OAS
3. change OBIEE Presentation services configuration to use analyticsSOAP/saw.dll
4. run credstore utility to encrypt password
5.restart xmlp server
6.restart http server
7.restart obiee server
8. restart obiee presentation service
Still we have issues when we try to accesses BI Publisher reports by clicking more Products -> BI Publisher or view reports directly on the OBIEE Dashboard
Thanks in advance.

configure one more virtual path which is unprotected from site minder. we had similar issue for Marketing and resolved by this virtual path.
ref:
http://vaandun-analytics.blogspot.com/2009/11/obi-publisher-with-empty-obi-catalog.html
Thanks
Sarathi

SSO Configuration in UNIX Environment

Hi,
We are planning to impliment SSO between 2004s Portal with R/3, BW, and host of other non SAP application which supports SSO. All the applications are hosted in UNIX environment.
Could anyone help us in understanding the pros and cons of having SSO in unix envrionment. Also you could give us any document (other than help.sap.com) which guides us in configuring will be of great help.
Thanks
Vivek Raj.

Hi,
There are no pros and cons for <b>SSO on Unix</b>. Needless to mention, the pros and cons of different operating systems supported by SAP.
The steps involved to configure SSO remains the same for any of the SAP backend systems:
1) Create a system on Portal and give a system alias to it.
2) Download the verify.der file from Portal (System Administration -> System Configuration -> Keystore Administration)
3) Log on to the backend SAP system.
4) Use transaction STRUSTSSO2 and import the Portal certifcate (verify.der) to the SAP R3 or SAP BW or SAP CRM or for that matter any SAP system with ABAP stack.
5) Give the values for EP system ID, client and language. Refer to this link : http://help.sap.com/saphelp_nw2004s/helpdata/en/78/f1a8490e7011d6999500508b6b8a93/content.htm
6) Configure the backend SAP systems to accept and verify the logon ticket. Use RZ10 and set the parameters : login/accept_sso2_ticket=1 and login/create_sso2_ticket=1
7) Restart your R3 or BW system.
For non-SAP systems, can you just let me know which systems are you referring to ?
Incase you need a document for SSO configuration, do send me your email address. You can also find documents in SDN Library.
Regards,
Sunil

Oid and sso configuration in ebs

Similar Messages

Maybe you are looking for