OID Install after 10g AS Installation

Hi,
is there a way or a documentation, how to install the OID after sucessfully installed 10g database and 10g application server without OID. 10g Database and 10g application server are running fine.
Thank you for your help

If you run a J2EE + Webcache installation OID will not be installed. You can either choose to install a separate infrastructure installation or use 'OracleAS Metadata Repository Creation Assistant User's Guide' to create a repository for OID (then using the installer)
More information can be found for e.g. Linux in:
Installation Guide: http://download-west.oracle.com/docs/cd/B15790_09/install.1012/install/toc.htm
and
http://download-west.oracle.com/docs/cd/B15790_09/repca.1012/repca/toc.htm
regards,
--Olaf

Similar Messages

TNS-12541: TNS:no listener after 10g DB installation

After installing Oracle 10g DB on my PC (Windows XP), I went to SQLPLUS, but when I connected using system user, it gave me an error:
TNS-12541: TNS:no listener
Then, I tried to check the status of the listener as below.
D:\oracle\product\10.1.0\Db_2\BIN>lsnrctl status
LSNRCTL for 32-bit Windows: Version 10.1.0.2.0 - Pro
:34
Copyright (c) 1991, 2004, Oracle. All rights reserv
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(K
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 2: No such file or director
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(H
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 61: Unknown error
Not sure what is going on here. Any pointers ?

Set the enviroment variable ORACLE_HOME , ORACLE_SID
and then issue lsnrctl status
D:\oracle\product\10.1.0\Db_2\BIN>lnsrct status

Change domain after 10g AS installation

hello forum,
is it possible to change the computer domain after installation of Application Server 10g (using windows 2003 server)? If yes, where can I find some documentation on how to manage this?
thanks for your help!
regards,
katharina

Hello!
One hint: You must unsecure Enterprise Manager Console (change back from https to http) manually before changing IP-Address and Hostname and after it secure it again.
Look at metalink note 280034.1.
regards
Harald.

Mail will not install after my new installation & recent updates

i just did a brand new install of leopard. i clik on mail . im at welcome to mail and it goes nowhere. pop to smtp spinning and spinning and it wont configure
this has been working flawlessly.
this is outrageously furious. i am entering all the right data
what the f is going on?????????????????

If you have a laptop, you might try downloading from a different network, or use wired instead of wireless if possible.

Repeated ORA-12547 Messages after installing Oracle 10g

Hi,
I installed Oracle 10g on a Redhat ES 3 box, and the install went okay, but when I try and interact with the server I get the message:
ORA-12547: TNS: lost contact
For example, if I use the Database Configuration Assistant to attempt to create a database, I will see the above message when it begins the database creation process, or if I try to interact with the Oracle server using sqlplus I will see the above message after each command entered.
I had recently tried to install Oracle 8.1.7 on the same box, but abandoned that after deciding that the effort required to link Oracle 8 on RHES3 just wasn't worth it. I have been told that this previous partial installation may be the cause of the problem, and have been advised to uninstall Oracle 8, uninstall Oracle 10g, and reinstall Oracle 10g. I find it hard to believe that it would require such an action to solve this problem. Is there any configuration changes I can make to resolve it? Also, what does this message actually mean?
I am new to Oracle, so thanks for any help with this problem.
Colm.

My last message asking for a grater degree of specificity was not overly specific, hence I am posting the kernel parms that I have set with the hopes that you will spot one that I set improperly or one that I neglected to set.
[root@awyr ~]# cat /proc/sys/kernel/shmmax
2147483648
[root@awyr ~]# cat /proc/sys/kernel/shmmni
4096
[root@awyr ~]# cat /proc/sys/kernel/shmall
2097152
[root@awyr ~]# ipcs -lm |grep "min seg size"
min seg size (bytes) = 1
[root@awyr ~]# cat /proc/sys/kernel/sem | awk '{print $1}'
250
[root@awyr ~]# cat /proc/sys/kernel/sem | awk '{print $2}'
32000
[root@awyr ~]# cat /proc/sys/kernel/sem | awk '{print $3}'
100
[root@awyr ~]# cat /proc/sys/kernel/sem | awk '{print $4}'
128
[root@awyr ~]# cat /proc/sys/fs/file-max
65536
[root@awyr ~]# cat /proc/sys/net/ipv4/ip_local_port_range
1024 65000
[oracle@awyr Desktop]$ ulimit -n
63536
[oracle@awyr Desktop]$ ulimit -u
4091
[oracle@awyr Desktop]$ ulimit -a
core file size (blocks, -c) 0
data seg size (kbytes, -d) unlimited
file size (blocks, -f) unlimited
max locked memory (kbytes, -l) 32
max memory size (kbytes, -m) unlimited
open files (-n) 63536
pipe size (512 bytes, -p) 8
stack size (kbytes, -s) 8192
cpu time (seconds, -t) unlimited
max user processes (-u) 4091
virtual memory (kbytes, -v) unlimited
from sysctl -a
my fs.file-max = 65536
in my limits.conf I added:
oracle soft nofile 4096
oracle hard nofile 63536
in my (1) /etc/pam.d/system-auth (2) /etc/pam.d/sshd (3) /etc/pam.d/su (4) /etc/pam.d/login
files I added:
session required pam_limits.so
and verified that it exists
in my limits.conf I added
oracle soft nproc 2047
oracle hard nproc 16384
my /etc/oratab has:
orcl:/usr/local/oracle/app/oracle/oracle/product/10.2.0/db_1:N
I tried to change the N at the end to a Y but to no avail
my /etc/oraInst.loc has:
inventory_loc=/usr/local/oracle/app/oracle/oraInventory
inst_group=oinstall
Thanks again for your atention
Richard

10g Universal Installer kernel errors while installing on Solaris 5.10

Hi all,
I have been trying to install Oracle 10g on a Solaris 5.10 machine (32-bit) as per the official Oracle Documentation for a couple of days now. It seems that the Universal Installer fails it's pre-installation steps and throws up error at the following kernel parameters:
Checking for shmsys:shminfo_shmmax=4294967295; found no entry. Failed <<<<
Checking for shmsys:shminfo_shmmni=100; found no entry. Failed <<<<
Checking for semsys:seminfo_semmni=100; found no entry. Failed <<<<
Checking for semsys:seminfo_semmsl=256; found no entry. Failed <<<<
Check complete. The overall result of this check is: Failed <<<<
I have followed the Oracle Documentation which says to change the kernel parameters using the resource control facility. For this I already have a project "oracle" which the user "oracle" has been assigned to:
$ id -ap oracle
uid=100(oracle) gid=100(oinstall) groups=100(oinstall),101(dba) projid=100(oracle)
Following are the snapshots from the prctl command on the current state of the kernel paramters:
For Checking for shmsys:shminfo_shmmax=4294967295; found no entry. Failed <<<<
$ prctl -n project.max-shm-memory -i project oracle
project: 100: oracle
NAME PRIVILEGE VALUE FLAG ACTION RECIPIENT
project.max-shm-memory
privileged 254MB - deny -
system 16.0EB max deny -
The Oracle recommended value is 4GB - I expect Universal Installer check to fail for this, so I change the parameter using the resource control facility by logging in as root in a new terminal and keeping one oracle session active.
# prctl -n project.max-shm-memory -v 4gb -r -i project oracle
I can see that the parameter has been set correctly when I do:
$ prctl -n project.max-shm-memory -i project oracle
project: 100: oracle
NAME PRIVILEGE VALUE FLAG ACTION RECIPIENT
project.max-shm-memory
privileged 4.00GB - deny -
system 16.0EB max deny -
For Checking for semsys:seminfo_semmni=100; found no entry. Failed <<<<
$ prctl -n project.max-sem-ids -i project oracle
project: 100: oracle
NAME PRIVILEGE VALUE FLAG ACTION RECIPIENT
project.max-sem-ids
privileged 128 - deny -
system 16.8M max deny -
The Oracle recommended value is 100 - I do not expect Universal Installer check to fail at this parameter
For Checking for shmsys:shminfo_shmmni=100; found no entry. Failed <<<<
$ prctl -n project.max-shm-ids -i project oracle
project: 100: oracle
NAME PRIVILEGE VALUE FLAG ACTION RECIPIENT
project.max-shm-ids
privileged 128 - deny -
system 16.8M max deny -
The Oracle recommended value is 100 - I do not expect Universal Installer check to fail at this parameter
Also when I try to issue the command:
$ prctl -n project.max-sem-nsems -i project oracle
I get:
prctl: failed to get resource control for project.max-sem-nsems: Invalid argument
Oracle recommends I should set a value of 256.
After setting up all this I still get the following errors from Universal Installer:
Checking for shmsys:shminfo_shmmax=4294967295; found no entry. Failed <<<<
Checking for shmsys:shminfo_shmmni=100; found no entry. Failed <<<<
Checking for semsys:seminfo_semmni=100; found no entry. Failed <<<<
Checking for semsys:seminfo_semmsl=256; found no entry. Failed <<<<
Check complete. The overall result of this check is: Failed <<<<
Now when I modify the kernel settings by editing the /etc/system file without even a reboot I'm can see all my Universal Installer Kernel checks as passed.
Not sure if I'm missing out some crucial step while setting up the kernel parameter using the resource control facility?
~ Somjit

It is bug in OUI.
OUI is looking at /etc/system to check the kernel parameter settings, but this file is not used (by default) in Solaris 10
It should check the kernel parameter settings using the prctl.
Check metalink note 363436.1
workaround is to
./runInstaller -ignoreSysPrereqs
or as You already did, change /etc/system as well.

Latest update of Muse is not installing on several tries,installation gets stuck at 43% and shows '' waiting'' at the ''Extracting'' stage for 7-8 hours after which it does not progress

latest update of Muse is not installing on several tries,installation gets stuck at 43% and shows '' waiting'' at the ''Extracting'' stage for 7-8 hours after which it does not progress.

Refer to EX11....
Creative Cloud Error Codes (WIP) | Mylenium's Error Code Database
Mylenium

I installed the new version of iTunes today. It's 12.1.1. After completing the installation, including restarting my computer, I was no longer able to use Windows Internet Explorer. Has anybody else experienced this? If so, how did you fix Explorer?

I installed the new version of iTunes today. It's 12.1.1. After completing the installation, including restarting my computer, I was no longer able to use Windows Internet Explorer. Has anybody else experienced this? If so, how did you fix Explorer? I was using Explorer 11 and Windows 7, installed on an HP Pavilion g series

Never heard of that being caused by installing iTunes. Try asking on a Windows forum. This isn't a problem with iTunes or any other Apple product. If you believe it is, uninstall iTunes. If the problem persists, you'll have to seek advice on a Windows forum or contact Microsoft for support.

Installing Oracle 10G Express Edition on Linux after installing Libaio-0.3

I had got a error while installing 10G Express Edition on Redhat Fedora core 4 linux after installing libaio-0.3.104-2.i386.rpm
I had given the following command in Linux Command prompt to install the oracle database 10 G Express Edition (oracle-xe-10.2.0.1-1.0.i386.rpm)
# sudo rpm -ivh /tmp/oracle-xe-10.2.0.1-1.0.i386.rpm
The error I had got is as follows:
Preparing.....#####################[100%]
1:oracle-xe Warning:/etc/init.d/oracle-xe saved as /etc/init.d/oracle-xe.rpmorig
error:Unpacking of archive failed on file /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/ons;4698950F:cpio:MD5 Sum Mismatch

The steps I am asking is for installing oracle 10G express edition on Redhat Fedora core 4 Linux version. Now, after downloading the fresh copy of Oracle 10G express edition from the Oracle site. I have successfully installed oracle now.
I was getting the following errors - I have pasted previous query for the problem which I had faced after installing Oracle 10 G Express Edition successfully on Redhat Fedora Core 4 Linux.
The Previous Query is as follows:
Thanks For Guiding Me All of you!
Finally, I have installed Oracle 10G Express Edition on Redhat Fedora core 4 Linux.
Now, I am having the following problems:
After making the changes as per my Reference mentioned in my different messages, I had done the troubleshooting steps going to Options and setting the same.
1.When I try to load the http://127.0.0.1:8080/apex page it gives an error popup:
" The connection was refused when attempting to contact 127.0.0.1:8080 "
2. After opening the Run the SQL Command Line by clicking on applications and When I say " Connect System and when prompted for password, I have entered the password and gives another error as follows:
ORA-01034 : Oracle not available
ORA-27101: Shared Memory realm does not exist
Linux Error:2:No such file or directory
3. When I try to manually start the Listener or Services, It gives one more error:
Root Not a Member of DBA Group
I need to What is happening or What is the Problem and How will I rectify them?

I just got creative cloud 2014 and decided to install After effects on my laptop. I get error to install Adobe Application Manager. I got AAM but installing it, I got an error message "Installer failed to initialize. Please download Adobe support advisor"

I just got creative cloud 2014 and decided to install After effects on my laptop. I get error to install Adobe Application Manager. I got AAM but installing it, I got an error message "Installer failed to initialize. Please download Adobe support advisor" Now, the support advisor is discontinued. What do I do?
Please anyone help me.
Thanks

Error "Installer Failed to Initialize" | Install desktop application | Windows

Trouble installing Creative Cloud Desktop. After running the installer the dock the opens up is blank with a blue dotted loading emblem and will not do anything?????. New member here, thanks for the time.

After running the installer the dock the opens up is blank with a blue dotted loading emblem and will not do anything?????. I attempted to quit the install and restart but it produced the same result. New member here, thanks for the time.

Avanmanandfriends please see Creative Cloud app doesn't open and hangs on spinning progress wheel - http://helpx.adobe.com/creative-cloud/kb/creative-cloud-app-doesnt-open.html which discusses how to resolve your current error.

My computer slows down and hangs after installing oracle 10g

My computer just slows down after installing oracle 10g. I have a pentium 4 3ghz with 512 memory (32 mb used by graphics built in card). It slows down and hanged even if I agjusted the swap memory to 800 mb. I have two swap file/page file - in drive c and drive d. I even cannot shut it down because it takes maybe 30 minutes just to see the "shut-off/log-off" screen.

Before starting up Oracle, when you go to the task manager, how much RAM does it show actually free? 512 MB is pretty small to run Oracle in the first place-- Windows and Office can use a fair chunk of RAM themselves, depending on which Office apps you are running. You may also be suprised by the amount of RAM that a web browser, email client, and the various other apps that folks generally install can use.
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC

No Listener service after installing Oracle 10g 2

Hi,
I have finished installing Oracle 10g 2 on a windows 2003 server. But no Listener windows service is not created. Any explanation ? Should I create the manually , How ?
Many thanks.

No, but I created one after installing Oracle , by
DBCA.
I'm going to apply RDBMS 5337014 patch to upgrade to
10.2.0.3. Should I create Listener before ?
Thank you.
Message was edited by:
user522961For applying patch actually you don't need listener, but it is best if you have a listener for client to connect, isn't it?
cheers
FZ

Flash won't install after downloading...early 2013 MBP/Retina, 8GB DDR3 1600 MHz Ram, 3GHz Intel Core i7 Processor (clean installation)

Flash Player won’t install after downloading
On the first attempt to install v14, Flash Player v13 was installed and working fine.
I opened the installation package for the new Flash Player, followed standard protocol for installing Mac software and it hung before retrieving anything.
Subsequently, while watching the beach ball spin, I got an error message that the installer could not retrieve the v13 Flash Player software.
So I uninstalled Flash Player 13 and again attempted to install v14, only to see the spinning beach ball followed by a message that the installer could not retrieve the v14 Flash Player software.
I am running OS X v10.9.4 on an early 2013 MBP/Retina display with 3GHz Intel Core i7 processor and 8GB DDR3 1600 MHz Ram.
If you have any ideas or suggestions regarding my issue, please let me know.
Sincerely.
JWH

Try un-installing and then re-installing via the web site.
Adobe Flash Uninstaller
Adobe Flash Player

Cant Install Tiger From Original Installation Media After Hard Drive Failure.

I have this MacBook:
http://everymac.com/systems/apple/macbook/specs/macbook-core-2-duo-2.16-black-13 -mid-2007-specs.html
Hard Drive failed (no boot, nasty clicking sound).
I installed a new hard drive. Tried to install Snow Leopard from a retail disk - it would boot from the disc and I would get partway through the installation before stalling.
After doing research, I realized I needed to install from the original installation media (tiger) and then upgrade to a newer OS.
I dont have the Original installation media, called up Apple - paid their fees, got the 4 installation discs and no pressing C while booting, or pressing the option key will get the computer to boot from that installation disc.
I just get a folder with a ?
I know the drive works fine, because it booted normally from the Snow Leopard disc.
I know the new disc Apple sent is good, because I put it in my other computer (iMac) and saw the installer and was able to open the PDF readme.
Now im stuck - cant reinstall the OS because I cant get it to boot off the disc!
When holding down the C button during boot, I can hear the disc drive making noise - but all i get this that blinking folder with a ?

I could not boot into time machine's external drive. I used my snow leopard disk to install and and then Mavericks from app store. Then migration assistant.
I am thinking about a backup to my backup.
thanks for the help.

OID Install after 10g AS Installation

Similar Messages

Maybe you are looking for