OID Install Failure on Middle Tier

I'm trying to install the middle tier components on a second Linux server. The infrastructure install went fine but when I try to install the middle tier, I get an error message saying the OUI process can't connect to the OID process on the infrastructure. I can connect to the OID through oidadmin successfully but not from a different machine.
Can someone point me in the right direction on fixing this problem? I've been working on this for a couple of days.
Thanks.

Did you find a solution to the problem.
I am facing a similar one.
My install info as follows:
OS Linux
Kernel 2.4.18-14smp
Linux Distribution Redhat 8.0 (Psyche)
Would like to get as much info as possible
Thanks

Similar Messages

How to install oracle workflow middle tier in 10.2.0.4 64 bits

Hi all !
i've installed oracle workflow middle tier several times using oracle 10g companion CD release 1, 32 bits.
Database has been upgraded to 10gR2 (10.2.0.4) and operating system upgraded to windows 2008 enterprise 64 bits.
I've downloaded oracle companion CD 10.2.0.4 64 bits but there is no option for installing Oracle Workflow Middle Tier :(
How should i proceed to install oracle workflow middle tier for 10.2.0.4 in an 64 bits operating system?
Best Regards
Rui Madaleno

Any feedback, please?

Groups vanish from OID when a new middle tier is installed for Portal - URGENT

gurus,
we had the following portal environment -
1. database tier (sun box #1) - oracle 9i database
2. middle tier (sun box #2) - oracles 9iAS portal Release 2 with webcache option
now, we installed 9iAS on a third box (sun box#3) so we can have multiple apache servers.
after the install was done i logged into the portal to do a health check but, found that all the groups were missing.
i had following groups before bringing in sun box#3 -
GRP_ADMIN
GRP_BASE_USER and many others.
after the installation of third server i lost all the groups. it looks like the groups vanished away from the OID. i found the following -
Owner.Table Groups exist ?
(Y / N)
PORTAL.WWSEC_GROUP$ Y
ORASSO.WWSEC_GROUP$ N
could anyone reply on this pls ... its very critical cause all the user privileges has been lost due to this.
thanx a bunch.

Hi,
Just to close off this thread, I got this portal installation working. I think what made it work was adding an additional 512MB of memory to the machine in addition to the original 640MB.
Jim

How to de-install Infra and Middle-tier properly?

Dear All,
I want to clear the proper de-install concept of Infra & Middle-tier so please guide me for this.
Thanks,
Waheed

Hi Waheed,
On the Windows operating system, you can run the Oracle Universal Installer (look in your Start menu) and de-install both an infrastructure and middle-tier at the same time (if they're on the same machine).
When the Oracle Universal Installer is done, you will have to delete the Oracle homes from your hard drive.
Not sure if it works the same way on Unix/Linux installations. . .
HTH,
Jim

Identify service failure on middle tier

My middle tier PM is getting worse. Now the identify service is failing. It sites the error stack but I don't no where to access that. The logs don't seem to show anything significant. I've gone so far as to restart the PM, rebuild the user task service, and try another user task. Nothing shows resolution.
initiateTask (faulted)
[2005/06/24 00:29:00] "{http://xmlns.oracle.com/pcbpel/taskservice/taskmanager}taskErroredFault" has been thrown. less
<taskErroredFault xmlns="http://xmlns.oracle.com/pcbpel/taskservice/taskmanager">
<part name="faultInfo">
<faultInfo>Identity service system error. Error while invoking Identity service. Service cannot resolve identity in realm "{0}" Check the error stack and fix the cause of the error. Contact oracle support if error is not fixable.</faultInfo>
</part>

Please disregard. More pilot error.

Can I install XSU utility in middle tier?

Assuming 3 tier arch. can XSU be installed in middle tier, with oracle9i on 3rd tier?
Does it really need oracle connection or can the resultset also used to get the xml without any connection to oracle?
What should I be careful, if I can and want to install xsu in middle tier?
Will it provide all the functionalities if it's on different machine and can connect to oracle?
Thanks!

You can use XSU in mid-tier. You need to have JDBC to connect to Oracle DB as XSU is the gateway for your to query and insert data into DB in XML format.

Middle-Tier URL is not accessing

Dear All,
I am facing issue when i try to access the MT-URL..
The scenario is, I have installed Infrastructure and Middle-tier on both machines.
Em & Infrastructure URl is accessing but Middle-Tier URL is not accessing.
Thanks

Hi,
Have you started the iasconsole?
ORACLE_HOME/bin/emctl start iasconsole
Or have you checked the status of the middle-tier components using opmnctl?
ORACLE_HOME/opmn/bin/opmnctl status
HTH,
Jim

REPOINT EXISTING MIDDLE TIER TO NEW IM

We have AS Middle tier called M1 which is registered under IM (OID & SSO ) IM1
Now we have another AS Middle Tier called M2 which is registered under IM(OID & SSO ) IM2
M1 -> IM1
M2 -> IM2
Now I want to repoint my middle tier M1 pointing to IM2 instead of IM1 .
So I need new configuration where
M1 should point to IM2
Any Pointers How to do this ?
Regards
Atul Kumar

Andreas
We are on 10.1.2 & I checked all admin guide but there is no mention anbout this scenario.
Admin Guide talks about moving whole IM from one node to another or migrating Middle Tier when IM is created by replication .
I use Ias console to move IM & it failed while validation getting error message like
2006-03-20 14:18:45,223 [EMUI_14_18_45_/console/ias/infra/security/wizard/review] ERROR ias.ias prepareData.422 - iAS Infra Sec, error calling validateForSetOIDConnect(). Error connecting to Oracle Internet Directory Server specified by server2.ad.ic.ac.uk:4031. Connecting as Application Server instance specified by 'orclApplicationCommonName=raeportaltst.server23,cn=IAS Instances, cn=IAS, cn=Products, cn=OracleContext'. Base Exception : oracle.ias.repository.schema.SchemaException: Unable to establish secure connection to Oracle Internet Directory Server ldap://server2.domain.uk:4031/ Base Exception : javax.naming.AuthenticationException: [LDAP: error code 49 - Invalid Credentials]
oracle.ias.repository.schema.SchemaException: Error connecting to Oracle Internet Directory Server specified by server2.domain.uk:4031. Connecting as Application Server instance specified by 'orclApplicationCommonName=raeportaltst.server23,cn=IAS Instances, cn=IAS, cn=Products, cn=OracleContext'. Base Exception : oracle.ias.repository.schema.SchemaException: Unable to establish secure connection to Oracle Internet Directory Server ldap://server2.domain.uk:4031/ Base Exception : javax.naming.AuthenticationException: [LDAP: error code 49 - Invalid Credentials]
Where as server2 is OID server & server23 is middle tier which is attached to another OID & now point to OID on server2 .
I checked password I entered are correct , Is there any Instance password in OID as well ?
I think error is Middle Tier Instance its not able to login to OID in IM2 because its not registered yet .
Any Pointers ?

Error During Install Oracle Application Server middle tier

Hi all!
When I install Business Intelligence and Forms, I get error when Portal Configuration Assistant:
STEP 3: STEP 3 : Populating Portal seed in OID
Creating/Modifying Directory Provisioning Profiles in OID
Subscriber: dc=thanhba,dc=com
INSTALL_ERROR: Checking the status of Provisioning Profile: User-Defined Exception : 81: Can't contact LDAP server
And:
Followed:
STEP 4 : Adding iAS Provider Group to Portal
ERROR:
ORA-12154: TNS:could not resolve the connect identifier specified
I can help you!!!
Thanhks!

You have Infrastructure and middle tier is running in the same box. please consider the below steps.
Because middle tiers depend on OracleAS Infrastructure services, you need to ensure that the OracleAS Infrastructure services are started first, followed by middle-tier services. You can do this in the following ways:
1.Give the OracleAS Infrastructure an Oracle home name that alphabetically comes before the middle-tier name. (When you restart a computer, Windows typically starts up services in alphabetical order.) For example: name the OracleAS Infrastructure "Infra", and name the middle tier "J2EE".
2.Edit the registry (using the Registry Editor) to delay the start of the middle-tier services by setting up dependencies between the OracleAS Infrastructure and middle-tier services. You do this after installing both OracleAS Infrastructure and middle tier. See Section 16.6, "Service Dependencies" for details.
This is from installtion document ..
http://download-east.oracle.com/docs/cd/B14101_12/install.1012/install/basic.htm#CHDCIEBA

Installing a Forms & Report middle Tier (10.1.2) on a 10.1.3 farm

I have to install a new farm based on the 10.1.3 release. I will install the Infrastracture and one middle tier in two different Oracle Homes. The problem is that I need also Forms & Report Services, and we know that there will be no F&R services until release 11. The question is:
can I install a 10.1.2 middle tier instance on top of a 10.1.3 infrastructure (with a different Oracle Homve, of course)?
Thanks in advance
Rino

AS 10.1.3 doesn't have any infrastructure (as well as not having Web Cache etc). The latest full release is 10.1.2.0.2, which includes infrastructure and Forms/Reports. For Identity Management, I'd recommend the new 10.1.4.
As indicated above, the latest Forms/Reports release is 10.1.2.0.2 (patched to 10.1.2.2), which is the one you should use. You can install either the full Application Server 10.1.2.0.2 with Forms/Reports, or use the Forms&Reports Only release.
Regards,
Martin

Error when installing OAS 10g 10.1.2.0.2 Middle Tier on SUSE linux 10.3

Hello,
I have installed the infrastructure successfully but when I install the Middle Tier (in it's separate home) the installer gets up to 88% and then displays the error:
Error in invoking target 'proxy_install runm_install server_install cgi_install cli_install conv_install qv_install' of makefile '/opt/oracle/OraHome_as101202_mt/reports/lib/ins_reports.mk'. See '/opt/oracle/oraInventory/logs/installActions2008-02-06_10-32-46AM.log' for details.
Looking in the log I see:
Start output from spawned process:
rm -f rwproxy
gcc -o rwproxy -L/opt/oracle/OraHome_as101202_mt//lib/ -L/opt/oracle/OraHome_as101202_mt/lib/ -L/opt/oracle/OraHome_as101202_mt/lib//stubs -rdynamic -Bdynamic -L/opt/oracle/OraHome_as101202_mt/jdk/jre/lib/i386 -L/opt/oracle/OraHome_as101202_mt/jdk/jre/lib/i386/server -L/opt/oracle/OraHome_as101202_mt/jdk/jre/lib/i386/native_threads -ljvm srwsps.o rwsdm.o rwsps.o \
-Wl,-rpath,/usr/X11R6/lib -L/usr/X11R6/lib -lXm -lXt -lX11 -lm -lXp -lXext /opt/oracle/OraHome_as101202_mt/lib//libzrc.a -lca -lnn -lrw -lclntsh `cat /opt/oracle/OraHome_as101202_mt/lib/ldflags` -lnsslb10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat /opt/oracle/OraHome_as101202_mt/lib/ldflags` -lnsslb10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lmm -lcore10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 `cat /opt/oracle/OraHome_as101202_mt/lib/ldflags` -lnsslb10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat /opt/oracle/OraHome_as101202_mt/lib/ldflags` -lnsslb10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lcore10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lcore10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 `cat /opt/oracle/OraHome_as101202_mt/lib/sysliblist` -Wl,-rpath,/opt/oracle/OraHome_as101202_mt/lib,-rpath,/opt/oracle/OraHome_as101202_mt/jdk/jre/lib/i386:/lib:/usr/lib -lm `cat /opt/oracle/OraHome_as101202_mt/lib/sysliblist` -ldl -lpthread -lm -L/opt/oracle/OraHome_as101202_mt/lib -L/opt/oracle/OraHome_as101202_mt/lib/stubs/ -lutj -lutl -ljvm -lhpi -nsl
gcc: unrecognized option '-nsl'
/usr/lib/libXtst.so.6: undefined reference to `__stack_chk_fail@GLIBC_2.4'
/usr/lib/libXtst.so.6: undefined reference to `__fprintf_chk@GLIBC_2.3.4'
/usr/lib/libXtst.so.6: undefined reference to `__sprintf_chk@GLIBC_2.3.4'
collect2: ld returned 1 exit status
make: *** [rwproxy] Error 1
End output from spawned process.
Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target 'proxy_install runm_install server_install cgi_install cli_install conv_install qv_install' of makefile '/opt/oracle/OraHome_as101202_mt/reports/lib/ins_reports.mk'. See '/opt/oracle/oraInventory/logs/installActions2008-02-06_10-32-46AM.log' for details.
Exception Severity: 1
The OS is SUSE 10.3. I know it's not certified.
It looks to me that the make utility does not know how to handle the '-nsl' option.
Is there a workaround for this error?
I hope some one has an idea as I have searched the forums and google without much success.
Thanks in advance,
Jon

Thanks for the tip.
Correct me if I am wrong but you have set up SLED SP1 connecting to an OS like (RHEL 4/OEL 4,SuSE 9) using VMWare Server. What OS is SLED?
I chose SUSE 10.3 as its free and I want to set up apps server for purely training purposes. Do you know of a free linux OS that is certified to run AS 10g 10.1.2.0.2?
Thanks
Jon

How to install Oracle BPEL Process Manager for OracleAS Middle Tier

hi,
i need to install BPEL process manager, so i download the following file from otn
1.soa_windows_x86_101310_disk1
2.soa_windows_x86_bpel_101310
here i read the document named b28980.pdf from bpel\doc\pc.1012 to install BPEL PM
so i start to complete the pre-installation task
1.installed Oracle database 10g
2.Run the Integration Repository Creation Assistant on the Database
3.Install Oracle Application Server 10g Release3 (10.1.3.1.0) and select either the J2EE Server installation type or the J2EE and Web Server installation type. selected J2EE and Web Server installation type
and installed according to the Oracle application server installation guide.
installed OracleAS in the path : D:\product\10.1.3.1\OracleAS_1
4.Install the current release of Oracle BPEL Process Manager for OracleAS Middle Tier
here they mention to select the J2EE and Web Server installation type because that type is selected in Oracle AS installed in Oracle Application Server
so i start to install the BPEL PM by selecting the setup.exe-->and shows the location source and destination
default destination is : D:\product\10.1.3.1\OraBPEL_1 selected next on the screen
the next screen is select installation type here there are two types named
1.BPEL process Manager for Developer (371MB)
2.BPEL process manager for Oracle AS Middle tier (107MB)
i selected 2.BPEL process manager for Oracle AS Middle tier (107MB) and click next
pop up window opens with title dependencies
error:
BPEL Process manager for oracle AS Middle tier will run on top of a supported Oracle Application Server 10.1.3.1.0 J2EE server and Web Server Or J2EE server instance. this location does not contain this instance. Please select new Oracle home that contains a supported instance.
so i changed the destination path to : D:\product\10.1.3.1\OracleAS_1\BIN then also i got the same error.
please any one mention the path for J2EE and Web Server instance for installing the BPEL PM for Oracle AS Middle Tier.
Thanks in Advance
Aswath Thaniga

If you choose the developer version you will be fine.
If you have installed J2EE and Web Server installation into D:\product\10.1.3.1\OracleAS_1 then this is the location you install your BPEL PM into, not D:\product\10.1.3.1\OraBPEL_1 or D:\product\10.1.3.1\OracleAS_1\BIN.
D:\product\10.1.3.1\OracleAS_1 is what we call the ORACLE_HOME, generally we create a new home for each install, but in this case there is a dependency on 10.1.3.1 OC4J container. So it needs to be installed into 10.1.3.1 oracle home.
The bin directory is just the executables for that home, its not the actual. home.
cheers
James

How to install/upgrade Ultrasearch for AS Middle Tier 10.1.2.0.2? DB 9208.

Hi,
I am trying to understand the Ultrasearch from the point of view of my 10.1.2.0.2 middle tier. Here is my environment:
Our Metadata Repository and Portal Repository (Customer) databases are version 9.2.0.8. Recently patched to 9.2.0.8 from 9.2.0.7.
Our Infrastructure & Middle Tiers have been recently upgraded to version 10.1.2.0.2 from version 9.0.4.1.
Both the repository databases and the Infra and Mid tiers have their own Oracle Homes.
From what I read, Ultrasearch is installed by default with an Oracle Database. It is also available with Oracle Application Server.
With the version of Ultrasearch coming with our 10.1.2.0.2 AS being a later version than the one that came with the Database, I am trying to figure out how to install the correct Ultrasearch in our Customer (or Metadata ?) database.
The iasua.log from our middle tier upgrade says:
============================================================================
2009/07/16 12:27:20.478 PDT NOTIFICATION:1 Framework: Starting to examine UltraSearch.
2009/07/16 12:27:20.478 PDT NOTIFICATION:1 Framework: Finished examining UltraSearch with status: Success.
2009/07/16 12:52:41.587 PDT NOTIFICATION:1 Framework: Starting to examine UltraSearch.
2009/07/16 12:52:41.587 PDT NOTIFICATION:1 Framework: Finished examining UltraSearch with status: Success.
2009/07/19 19:08:28.616 PDT NOTIFICATION:1 Framework: Starting to examine UltraSearch.
2009/07/19 19:08:28.616 PDT NOTIFICATION:1 Framework: Finished examining UltraSearch with status: Success.
2009/07/19 19:12:25.560 PDT NOTIFICATION:1 Framework: Starting to upgrade UltraSearch.
2009/07/19 19:12:25.579 PDT NOTIFICATION:1 Framework: Finished upgrading UltraSearch with status: Success.
============================================================================
But during the Metadata Repository Upgrade using MRUA, I saw the following error:
============================================================================
Calling upgrade plugin for ULTRASEARCH
Error: Component upgrade failed ULTRASEARCH
============================================================================
I can connect to the Ultrasearch Admin tool from the Application Server Console middle tier => portal page, and I see there that the version is 10.1.0.4.2. Ultrasearch has never been setup previously with our 904 environment. I see the WK_TEST default instance there that I can navigate around. My question is, how do I check and confirm that Ultrasearch has been installed correctly for my Application Server?
If I have to install a new version of Ultrasearch, what are the installation steps? Does Ultrasearch always use the Metadata repository database? Or can it be configured to use a customer database? I don't see a WKSYS schema in our Portal database. WKSYS exists only in our MR database.
As per the APP_REGISTRY in our MR database, the Ultrasearch component is version 9.2.0.8.0 and is INVALID.
I believe that Ultrasearch was an option prior to 10.1.2+ releases, but is required with the recent releases. Correct me if I am wrong.
I think Ultrasearch is installed for our AS environment. I don't know if it is valid.
Any help would be appreciated. I just need to confirm that I am good to go, to proceed and upgrade our Portal to version 10.1.4.
Thanks.
CV

Figured out that Ultrasearch was installed as a part of the Middle Tier install and was upgraded successfully during the Middle Tier upgrade.
Thanks.
CV

Has anyone installed CM SDK into 9iAS rel2 90201 middle tier?

Hi all,
I have to install CM SDK into 9iAS rel2 90201 on solaris. We have a functioning environment (middle tier and infrastructure on the same machine). Has anyone done this? Any problems? Gotchas?
Thanks in advance!
Tracie

Installed CM SDK into 9iAS 2 and Oracle 9i on the same machine (not using Infrastructure). Had problems with CM SDk configuration. Finally setup the server, but cannot figure out how to login as a regular user. Looked all over for the user guide and found none existing.

Oracle forms 10g (win Xp middle tier IE 8 Win 7- IE 8 client)

forms services 10.1.2.0.2
Database 11gR2 also on Win Xp pro SP3
Hi
I have a problem with java and Jinitiator and my understanding of what is / should be happening.
In the file forms/server/formsweb.cfg see below. I can alter the parameter
baseHTMLjinitiator=basejini.htm
###baseHTMLjinitiator=basejpi.htm
between the two alternatives. As it stands as shown the IE8 on the middle tier and on the database PC both work as near correctly as i can tell. On the Win 7 client IE 8 however crashes. switch it to the other way around and the
win 7 works and the win xp on the database server stops with frm-92095 error version number too low. while on the middle tier Xp PC a blank doucument is displayed.
How can i have both working at the same time please. I you need more information i will happily supply it.
Neill
# $Id: formsweb.cfg 15-apr-2005.13:17:30 pkuhn Exp $
# formsweb.cfg defines parameter values used by the FormsServlet (frmservlet)
# This section defines the Default settings. Any of them may be overridden in the
# following Named Configuration sections. If they are not overridden, then the
# values here will be used.
# The default settings comprise two types of parameters: System parameters,
# which cannot be overridden in the URL, and User Parameters, which can.
# Parameters which are not marked as System parameters are User parameters.
# SYSTEM PARAMETERS
# These have fixed names and give information required by the Forms
# Servlet in order to function. They cannot be specified in the URL query
# string. But they can be overridden in a named configuration (see below).
# Some parameters specify file names: if the full path is not given,
# they are assumed to be in the same directory as this file. If a path
# is given, then it should be a physical path, not a URL.
# USER PARAMETERS
# These match variables (e.g. %form%) in the baseHTML file. Their values
# may be overridden by specifying them in the URL query string
# (e.g. "http://myhost.mydomain.com/forms/frmservlet?form=myform&width=700")
# or by overriding them in a specific, named configuration (see below)
[default]
# System parameter: default base HTML file
baseHTML=base.htm
# System parameter: base HTML file for use with JInitiator client
baseHTMLjinitiator=basejini.htm
###baseHTMLjinitiator=basejpi.htm
# System parameter: base HTML file for use with Sun's Java Plug-In
baseHTMLjpi=basejpi.htm
# System parameter: delimiter for parameters in the base HTML files
HTMLdelimiter=%
# System parameter: working directory for Forms runtime processes
# WorkingDirectory defaults to <oracle_home>/forms if unset.
workingDirectory=
# System parameter: file setting environment variables for the Forms runtime processes
envFile=default.env
# Forms runtime argument: whether to escape certain special characters
# in values extracted from the URL for other runtime arguments
escapeparams=true
# Forms runtime argument: which form module to run
form=test.fmx
# Forms runtime argument: database connection details
userid=scott/xxxxxxxxxxx@orcl
# Forms runtime argument: whether to run in debug mode
debug=no
# Forms runtime argument: host for debugging
host=
# Forms runtime argument: port for debugging
port=
# Other Forms runtime arguments: grouped together as one parameter.
# These settings support running and debugging a form from the Builder:
otherparams=buffer_records=%buffer% debug_messages=%debug_messages% array=%array% obr=%obr% query_only=%query_only% quiet=%quiet% render=%render% record=%record% tracegroup=%tracegroup% log=%log% term=%term%
# Sub argument for otherparams
buffer=no
# Sub argument for otherparams
debug_messages=no
# Sub argument for otherparams
array=no
# Sub argument for otherparams
obr=no
# Sub argument for otherparams
query_only=no
# Sub argument for otherparams
quiet=yes
# Sub argument for otherparams
render=no
# Sub argument for otherparams
record=
# Sub argument for otherparams
tracegroup=
# Sub argument for otherparams
log=
# Sub argument for otherparams
term=
# HTML page title
pageTitle=Oracle Application Server Forms Services
# HTML attributes for the BODY tag
HTMLbodyAttrs=
# HTML to add before the form
HTMLbeforeForm=
# HTML to add after the form
HTMLafterForm=
# Forms applet parameter: URL path to Forms ListenerServlet
serverURL=/forms/lservlet
# Forms applet parameter
codebase=/forms/java
# Forms applet parameter
imageBase=DocumentBase
# Forms applet parameter
width=750
# Forms applet parameter
height=600
# Forms applet parameter
separateFrame=false
# Forms applet parameter
splashScreen=
# Forms applet parameter
background=
# Forms applet parameter
lookAndFeel=Oracle
# Forms applet parameter
colorScheme=teal
# Forms applet parameter
logo=
# Forms applet parameter
restrictedURLparams=HTMLbodyAttrs,HTMLbeforeForm,pageTitle,HTMLafterForm,log,allow_debug,allowNewConnections
# Forms applet parameter
formsMessageListener=
# Forms applet parameter
recordFileName=
# Forms applet parameter
serverApp=default
# Forms applet archive setting for JInitiator
archive_jini=frmall_jinit.jar
# Forms applet archive setting for other clients (Sun Java Plugin, Appletviewer, etc)
archive=frmall.jar
# Number of times client should retry if a network failure occurs. You should
# only change this after reading the documentation.
networkRetries=0
# Page displayed to Netscape users to allow them to download Oracle JInitiator.
# Oracle JInitiator is used with Windows clients.
# If you create your own page, you should set this parameter to point to it.
jinit_download_page=/forms/jinitiator/us/jinit_download.htm
# Parameter related to the version of JInitiator
jinit_classid=clsid:CAFECAFE-0013-0001-0022-ABCDEFABCDEF
# Parameter related to the version of JInitiator
jinit_exename=jinit.exe#Version=1,3,1,22
# Parameter related to the version of JInitiator
jinit_mimetype=application/x-jinit-applet;version=1.3.1.22
# Page displayed to users to allow them to download Sun's Java Plugin.
# Sun's Java Plugin is typically used for non-Windows clients.
# (NOTE: you should check this page and possibly change the settings)
jpi_download_page=http://java.sun.com/products/archive/j2se/1.4.2_06/index.html
# Parameter related to the version of the Java Plugin
jpi_classid=clsid:CAFEEFAC-0014-0002-0006-ABCDEFFEDCBA
# Parameter related to the version of the Java Plugin
jpi_codebase=http://java.sun.com/products/plugin/autodl/jinstall-1_4_2-windows-i586.cab#Version=1,4,2,06
# Parameter related to the version of the Java Plugin
jpi_mimetype=application/x-java-applet;jpi-version=1.4.2_06
# EM config parameter
# Set this to "1" to enable Enterprise Manager to track Forms processes
em_mode=0
# Single Sign-On OID configuration parameter
oid_formsid=%OID_FORMSID%
# Single Sign-On OID configuration parameter
oracle_home=E:\DSHome_1
# Single Sign-On OID configuration parameter
formsid_group_dn=%GROUP_DN%
# Single Sign-On OID configuration parameter: indicates whether we allow
# dynamic resource creation if the resource is not yet created in the OID.
ssoDynamicResourceCreate=true
# Single Sign-On parameter: URL to redirect to if ssoDynamicResourceCreate=false
ssoErrorUrl=
# Single Sign-On parameter: Cancel URL for the dynamic resource creation DAS page.
ssoCancelUrl=
# Single Sign-On parameter: indicates whether the url is protected in which
# case mod_osso will be given control for authentication or continue in
# the FormsServlet if not. It is false by default. Set it to true in an
# application-specific section to enable Single Sign-On for that application.
ssoMode=false
# The parameter allow_debug determines whether debugging is permitted.
# Administrators should set allow_debug to "true" if servlet
# debugging is required, or to provide access to the Forms Trace Xlate utility.
# Otherwise these activities will not be allowed (for security reasons).
allow_debug=false
# Parameter which determines whether new Forms sessions are allowed.
# This is also read by the Forms EM Overview page to show the
# current Forms status.
allowNewConnections=true
# EndUserMonitoring
# EndUserMonitoringEnabled parameter
# Indicates whether EUM/Chronos integration is enabled
EndUserMonitoringEnabled=
# EndUserMonitoringURL
# indicates where to record EUM/Chronos data
EndUserMonitoringURL=
# Example Named Configuration Section
# Example 1: configuration to run forms in a separate browser window with
# "generic" look and feel (include "config=sepwin" in the URL)
# You may define your own specific, named configurations (sets of parameters)
# by adding special sections as illustrated in the following examples.
# Note that you need only specify the parameters you want to change. The
# default values (defined above) will be used for all other parameters.
# Use of a specific configuration can be requested by including the text
# "config=<your_config_name>" in the query string of the URL used to run
# a form. For example, to use the sepwin configuration, your could issue
# a URL like "http://myhost.mydomain.com/forms/frmservlet?config=sepwin".
[sepwin]
separateFrame=True
lookandfeel=Generic
# Example Named Configuration Section
# Example 2: configuration forcing use of the Java Plugin in all cases (even if
# the client browser is on Windows)
[jpi]
baseHTMLJInitiator=basejpi.htm
# Example Named Configuration Section
# Example 3: configuration running the Forms ListenerServlet in debug mode
# (debug messages will be written to the servlet engine's log file).
[debug]
serverURL=/forms/lservlet/debug
# Sample configuration for deploying WebUtil. Note that WebUtil is shipped with
# DS but not AS and is also available for download from OTN.
[webutil]
WebUtilArchive=frmwebutil.jar,jacob.jar
WebUtilLogging=off
WebUtilLoggingDetail=normal
WebUtilErrorMode=Alert
WebUtilDispatchMonitorInterval=5
WebUtilTrustInternal=true
WebUtilMaxTransferSize=16384
baseHTMLjinitiator=webutiljini.htm
baseHTMLjpi=webutiljpi.htm
archive_jini=frmall_jinit.jar
archive=frmall.jar
lookAndFeel=oracle

You have a mixture of problems here.
1. Oracle Jinitiator is not supported for use on Windows 7
2. JRE 1.7 is not supported for use with any version of Forms on any platform. Be sure you do not have this version installed.
3. JRE 1.6 is not supported for use with Forms 10.1.2.0.2, however is supported with 10.1.2.3 (10.1.2.0.2 + patch ID 5983622) and only with IE 8
4. In order to use Win 7 with Forms 10 in a certified and supported manner, you must use 10.1.2.3 (meaning 10.1.2.0.2 + patch ID 5983622).
In short, my recommendation would be the following:
o Patch to 10.1.2.3 (assuming you have access to MyOracleSupport)
o Don't bother trying to use Oracle Jinitiator as it is old and has been desupported for a long time.
o Uninstall any instances of Jinitiator as it can cause conflicts with other JRE installations.
o Uninstall all instances of JRE 1.7. Reconfig your formsweb.cfg to use the JRE (Java Plugin) 1.6.0
baseHTMLJInitiator=basejpi.htm
jpi_classid=clsid:8AD9C840-044E-11D1-B3E9-00805F499D93
jpi_mimetype=application/x-java-applet;version=1.6
jpi_download_page=http://www.oracle.com/technetwork/java/javase/downloads/jre-6u27-download-440425.html
jpi_codebase=http://javadl-esd.sun.com/update/1.6.0/jinstall-6u27-windows-i586.cab#Version=1,6,0Finally, refer to this:
http://www.oracle.com/technetwork/middleware/ias/downloads/as-certification-r2-101202-095871.html#BABGCBHA

OID Install Failure on Middle Tier

Similar Messages

Maybe you are looking for