Oid installation problems

Hi Experts,
I am trying to install the OID through oracle application server 10G through silent installation on solaris 9 sparc machine since the solaris aprac server does not support GUI.
I am trying to install both the meta data repository and OID at the same time by using the silent file,the installation starts fine in the beginning and later on I am getting the following error.
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be 5.8, 5.9 or 5.10. Actual 5.9
Passed
Checking Temp space: must be greater than 250 MB. Actual 10124 MB Passed
Checking swap space: must be greater than 1535 MB. Actual 15098MB Passed
Checking operating system packages: SUNWarc,SUNWbtool,SUNWhea,SUNWlibm,SUNWlibms,SUNWsprot,SUNWsprox,SUNWtoo,SUNWi1of,SUNWxwfnt Passed
Checking if CPU speed is above 450 MHz. Actual 1336 MHz Passed
All installer requirements met.
Checking operating system patches: 113096-03,112785-35 Passed
Checking for patch 113096-03; found 113096-03
Checking for patch 112785-35; found 112785-49
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2010-01-28_10-59-24PM. Please wait ...:"/app" 52 $ Oracle Universal Installer, Version 10.1.0.5.0 Production
Copyright (C) 1999, 2006, Oracle. All rights reserved.
Loading Product Information
...............................................................100% Done.
Analyzing dependencies
......................................Retry count 1 at Thu Jan 28 22:59:48 PST 2010
.........................100% Done.
Summary
Global Settings
Source: /app/oracle_sfw/Disk1/stage/products.xml
Oracle Home: /app/oid1 (oracle_infrahome_name)
Installation Type: Identity Management and Metadata Repository
Product Languages
English
Space Requirements
/ Required 3.94GB : Available 95.21GB
/tmp/ Required 138MB (only as temporary space) : Available 9.73GB
Interim patch Deinstalls (1 products)
Interim Patch# 5095948
New Installations (310 products)
Copying files in progress (Thu Jan 28 23:00:08 PST 2010)
............................................................... 6% Done.
............................................................... 13% Done.
............................................................... 19% Done.
............................................................... 26% Done.
............................................................... 33% Done.
............................................................... 39% Done.
............................................................... 46% Done.
............................................................... 53% Done.
........................................................ 58% Done.
Copy successful
Linking in progress (Thu Jan 28 23:05:19 PST 2010)
... 59% Done.
Link successful
Setup in progress (Thu Jan 28 23:07:43 PST 2010)
................................0 files secured.
.......CreateAdminUser: wrong args!
.........opmnctl: opmn is already running
.... 64% Done.
Setup successful
End of install phases.(Thu Jan 28 23:08:28 PST 2010)
Starting to execute configuration assistants
Launched configuration assistant 'Oracle Identity Management oneoff patch Configuration Assistant'
Tool type is: Recommended.
The command being spawned is: '/app/oid1/jdk/bin/java -cp /app/oid1//oneoffpatches//im1offca.jar -jar /app/oid1//oneoffpatches//im1offca.jar /app/oid1'
:"/app/oracle_sfw/Disk1" 106 $ cd Configuration assistant "Oracle Database Configuration Assistant" succeeded
Result code for launching of configuration assistant is: 0
Launched configuration assistant 'HTTP Server Configuration Assistant'
Tool type is: Recommended.
The command being spawned is: '/app/oid1/jdk/bin/java -DORACLE_HOME=/app/oid1 -cp /app/oid1/jlib/emConfigInstall.jar oracle.sysman.emSDK.conf.TargetInstaller addtarget -f /app/oid1/Apache/Apache/conf/ohstarget.xml'
Configuration assistant "HTTP Server Configuration Assistant" succeeded
Result code for launching of configuration assistant is: 0
Launched configuration assistant 'Oracle Application Server Instance Configuration Assistant'
Tool type is: Recommended.
The command being spawned is: '/app/oid1/jdk/bin/java -DORACLE_HOME=/app/oid1 -cp /app/oid1/jlib/emConfigInstall.jar oracle.sysman.emSDK.conf.TargetInstaller addtarget -f /app/oid1/config/targets2add.xml'
Configuration assistant "Oracle Application Server Instance Configuration Assistant" succeeded
Result code for launching of configuration assistant is: 0
Launched configuration assistant 'Internet Directory Configuration Assistant'
Tool type is: Recommended.
The command being spawned is: '/app/oid1/bin/oidca mode=OID dbuser=sys dbpwd=05f5713ddf32769ca20ff6cb2d1f741fcbdc5ffd77fde1edca connstr=servername nonsslport=13060 sslport=13130 supwd= iasinstance=.servername.sfbay.sun.com subscriberdn=dc=oracle,dc=com odspwd=05e25043df922abd5d923aaaa32bb68b74 -silent -crypto -debug'
Configuration assistant "Internet Directory Configuration Assistant" failed
Oracle Internet Directory Configuration failed. Please see log file: /app/oid1/ldap/log/oidca.log
Result code for launching of configuration assistant is: 1
Error:*** Alert: Some of the configuration assistants failed. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured. Select the failed assistants and click the 'Retry' button to retry them. ***
The following configuration assistants have not been successfully completed. These assistants must be completed for your product to be completely configured.
Execute file /app/oid1/cfgtoollogs/configToolCommands to re-run all skipped/failed configuration assistants.
echo Internet Directory Configuration Assistant
/app/oid1/bin/oidca mode=OID dbuser=sys dbpwd=05f5713ddf32769ca20ff6cb2d1f741fcbdc5ffd77fde1edca connstr=servername nonsslport=13060 sslport=13130 supwd= iasinstance=.servername.sfbay.sun.com subscriberdn=dc=oracle,dc=com odspwd=05e25043df922abd5d923aaaa32bb68b74 -silent -crypto -debug
echo Directory Integration Platform Configuration Assistant
/app/oid1/bin/oidca mode=DIP sslport=13130 sudn=cn=orcladmin oidhost=servername.sfbay.sun.com supwd= connstr=servername odspwd=05e25043df922abd5d923aaaa32bb68b74 iaspwd=05e25043df922abd5d923aaaa32bb68b74 iasinstance=.servername.sfbay.sun.com -silent -crypto -debug
echo Infrastructure Schema Configuration Assistant
/app/oid1/jdk/bin/java -jar /app/oid1/jlib/infratool.jar s -f /app/oid1/config/schemaload.properties -h servername.sfbay.sun.com -p 13060 -u cn=orcladmin -obf -o /app/oid1 -db servername -sslp 13130 -sslf false
echo Infrastructure Instance Configuration Assistant
/app/oid1/jdk/bin/java -classpath .:/app/oid1/sso/lib/ossoreg.jar:/app/oid1/jlib/ojmisc.jar:/app/oid1/jlib/repository.jar:/app/oid1/j2ee/home/jazn.jar:/app/oid1/j2ee/home/jaas.jar:/app/oid1/jdk/lib/dt.jar:/app/oid1/jdk/lib/tools.jar:/app/oid1/jlib/infratool.jar oracle.ias.configtool.UseInfrastructure i -f /app/oid1/config/infratool_instance_jazn.properties -h servername.sfbay.sun.com -p 13060 -u cn=orcladmin -obf -o /app/oid1 -m .servername.sfbay.sun.com -infra servername.sfbay.sun.com -sso true -sslp 13130 -sslf false
echo Delegated Administration Service Configuration Assistant
/app/oid1/bin/oidca mode=DAS sslport=13130 sudn=cn=orcladmin oidhost=servername.sfbay.sun.com supwd= -silent apachehost=servername.sfbay.sun.com apacheport=7777 apachemode=http -crypto iasinstance=.servername.sfbay.sun.com
echo Oracle Application Server Randomize Password
/app/oid1/jdk/bin/java -jar /app/oid1/config/randomtool.jar -o /app/oid1 -f /app/oid1/config/noschemapwd -h servername.sfbay.sun.com -p 13130 -u cn=orcladmin -obf -i servername.sfbay.sun.com -s true -obfdcm 05e25043df922abd5d923aaaa32bb68b74 -du SYS -dpobf 05f5713ddf32769ca20ff6cb2d1f741fcbdc5ffd77fde1edca -us /app/oid1/config/unlock.sql
echo Single Sign-On Configuration Assistant
/app/oid1/sso/bin/ssoca config /app/oid1 "cn=orcladmin" "AMERICAN_AMERICA.WE8ISO8859P1" http servername.sfbay.sun.com 7777 en
echo Infrastructure mod_osso Configuration Assistant
/app/oid1/jdk/bin/java -classpath .:/app/oid1/sso/lib/ossoreg.jar:/app/oid1/jlib/ojmisc.jar:/app/oid1/jlib/repository.jar:/app/oid1/j2ee/home/jazn.jar:/app/oid1/j2ee/home/jaas.jar:/app/oid1/jdk/lib/dt.jar:/app/oid1/jdk/lib/tools.jar:/app/oid1/jlib/infratool.jar oracle.ias.configtool.UseInfrastructure i -f /app/oid1/config/infratool_mod_osso.properties -h servername.sfbay.sun.com -p 13060 -u cn=orcladmin -obf -o /app/oid1 -m .servername.sfbay.sun.com -infra servername.sfbay.sun.com -mh servername.sfbay.sun.com -sso false -sslp 13130 -sslf false
echo Oracle Application Server Certificate Authority Configuration Assistant
/app/oid1/oca/bin/cminst 05e8145fce5ed1e45908e356778a14d082f5f12f9994152d9b
echo OC4J Instance Configuration Assistant
/app/oid1/jdk/bin/java -Djava.net.preferIPv4Stack=true -Djava.io.tmpdir=/tmp -mx512M -classpath /app/oid1/dcm/lib/dcm.jar:/app/oid1/dcm/lib/oc4j_deploy_tools.jar:/app/oid1/opmn/lib/opmnplugin.jar -Doracle.ias.sysmgmt.logging.logdir=/app/oid1/j2ee/home/log oracle.j2ee.tools.deploy.Oc4jDeploy -oraclehome /app/oid1 -verbose -inifile /app/oid1/j2ee/deploy.ini
echo OPMN Configuration Assistant - start HTTP Server
/app/oid1/opmn/bin/opmnctl startproc ias-component=HTTP_Server
echo OPMN Configuration Assistant - start DAS Instance
/app/oid1/opmn/bin/opmnctl startproc ias-component=OC4J process-type=OC4J_SECURITY
echo OPMN Configuration Assistant - start OCA Instance
/app/oid1/opmn/bin/opmnctl startproc ias-component=OC4J process-type=oca
echo Register DCM Plug-Ins With EM
/app/oid1/perl/bin/perl /app/oid1/bin/genpluginpath.pl /app/oid1 /app/oid1
echo Application Server Control Configuration Assistant
/app/oid1/bin/emctl startifdown iasconsole
echo DCM Repository Backup Assistant
/app/oid1/dcm/bin/dcmctl createInitialBackup -v -d -o /app/oid1 -force
The installation of Oracle Application Server Infrastructure 10g was successful, but some optional configuration assistants failed, were cancelled or skipped.
Please check /opt/oracle/oraInventory/logs/silentInstall2010-01-27_02-55-45AM.log for more details.
cat /opt/oracle/oraInventory/logs/silentInstall2010-01-27_02-55-45AM.log
Install has detected that port 1521 on your host is currently being used by another product. If this port is being used by an Oracle Network Services listener version 10.1.0.2 or higher, you may elect to continue the install by clicking on the OK button. The existing listener will be used to handle connection requests for this Metadata Repository. If this port is being used by an earlier version of Oracle Network Services listener, or is being used by a non-Oracle product, or you do not want to use the existing compatible Oracle Network Services listener, you must reconfigure the application that is using port 1521 to use another port, shut down that service or application and then click OK to continue with the install.
A configuration script needs to be run as root for the installation to be complete. Please run /app/oid1/root.sh as root at the end of install.
Configuration assistant "Internet Directory Configuration Assistant" failed
Oracle Internet Directory Configuration failed. Please see log file: /app/oid1/ldap/log/oidca.log
Error:*** Alert: Some of the configuration assistants failed. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured. Select the failed assistants and click the 'Retry' button to retry them. ***
The installation of Oracle Application Server Infrastructure 10g was successful, but some optional configuration assistants failed, were cancelled or skipped.
Please advise.

@Pramod
I ran the command configToolCommands and now I am getting the following output:
/app/oid1/cfgtoollogs" 16 $ ./configToolCommands
Internet Directory Configuration Assistant
Oracle Internet Directory Configuration failed. Please see log file: /app/oid1/ldap/log/oidca.log
Infrastructure Schema Configuration Assistant
Exception in thread "main" java.lang.UnsatisfiedLinkError: no jmisc in java.library.path
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1517)
at java.lang.Runtime.loadLibrary0(Runtime.java:788)
at java.lang.System.loadLibrary(System.java:834)
at oracle.security.misc.C05.c(C05)
at oracle.security.misc.Checksum.SHA(Checksum)
at oracle.ias.configtool.UseInfrastructure$Util.deobfuscate(UseInfrastructure.java:1564)
at oracle.ias.configtool.UseInfrastructure.runTool(UseInfrastructure.java:939)
at oracle.ias.configtool.UseInfrastructure.main(UseInfrastructure.java:205)
Infrastructure Instance Configuration Assistant
Exception in thread "main" java.lang.UnsatisfiedLinkError: no jmisc in java.library.path
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1517)
at java.lang.Runtime.loadLibrary0(Runtime.java:788)
at java.lang.System.loadLibrary(System.java:834)
at oracle.security.misc.C05.c(C05)
at oracle.security.misc.Checksum.SHA(Checksum)
at oracle.ias.configtool.UseInfrastructure$Util.deobfuscate(UseInfrastructure.java:1564)
at oracle.ias.configtool.UseInfrastructure.runTool(UseInfrastructure.java:939)
at oracle.ias.configtool.UseInfrastructure.main(UseInfrastructure.java:205)
Oracle Application Server Randomize Password
Exception in thread "main" java.lang.UnsatisfiedLinkError: no jmisc in java.library.path
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1517)
at java.lang.Runtime.loadLibrary0(Runtime.java:788)
at java.lang.System.loadLibrary(System.java:834)
at oracle.security.misc.C05.c(C05)
at oracle.security.misc.Checksum.SHA(Checksum)
at oracle.ias.randomtool.RandomTool$Enc.d(RandomTool.java:305)
at oracle.ias.randomtool.RandomTool.runTool(RandomTool.java:575)
at oracle.ias.randomtool.RandomTool.main(RandomTool.java:115)
Register DCM Plug-Ins With EM
Can't locate strict.pm in @INC (@INC contains: /ade_autofs/ade/perl/bin/Solaris/Opt/lib/5.6.1/sun4-solaris /ade_autofs/ade/perl/bin/Solaris/Opt/lib/5.6.1 /ade_autofs/ade/perl/bin/Solaris/Opt/lib/site_perl/5.6.1/sun4-solaris /ade_autofs/ade/perl/bin/Solaris/Opt/lib/site_perl/5.6.1 /ade_autofs/ade/perl/bin/Solaris/Opt/lib/site_perl .) at /app/oid1/bin/genpluginpath.pl line 31.
BEGIN failed--compilation aborted at /app/oid1/bin/genpluginpath.pl line 31.
Application Server Control Configuration Assistant
Oracle Enterprise Manager 10g Application Server Control Release 10.1.4.0.1
Copyright (c) 1996, 2006 Oracle Corporation. All rights reserved.
http://servername.sfbay.sun.com:1156/emd/console/aboutApplication
Starting Oracle Enterprise Manager 10g Application Server Control ...... started successfully.
DCM Repository Backup Assistant
backup created: InstalledImage_.servername.sfbay.sun.com
Please advise on this.

Similar Messages

Heelp! OID Installation Problem

Hello all,
I try to install OID server that come with Oracle DB 8.1.7 EE but without success. I tried first to install it in the same home and same DB: No success ! in the same home and different DB: No success ! in different home No success ! what should I do ?? I have this error message all the time:
10
Parameter "orahome" = C:\Oracle\OID
Parameter "orasid" = OID
Parameter "nlslang" = AMERICAN_AMERICA.UTF8
Parameter "dbca" = true
Parameter "notunix" = true
Parameter "windir" = C:\WINNT
DB instance not created
Why ?
Please Reply quickly
Thanks

Hello All,
Is my question so difficult ?? why didn't I receive any answer ??

Installation problem on Intel

I have tried to install Solaris 8 on my Dell machine.
I have tried to boot both directly via CD and by using Device Configuration Assistant on a floppy..
The first screen says this....
SunOS Secondary Boot version 3.00
WARNING: ACPI Tables not in Reclaim Memory
prom_panic: kmem_free block already free
Entering boot debugger:
[130ee5]:
and when i hit enter and choose c (continue execution), the m/c hangs and asks me to push ctrl-alt-del to reboot..
I don't know what the ACPI tables are .. and how i can fix this...
Anyone who knows this... please help..
Thanx a lot..

I have heard about the ACPI that may be a Power Managemnet Tools or something, it always be found in Microsoft Window 2000 Device Manager, sorry I can't help you to solve the problems.....because I also have some installation problem on my Intel paltform @_@.

Installation Problem on iTunes 6.0.1.3 - HpSdpAppCoreApp

Help!
I'm trying to install the new iTunes 6.0 and I'm getting a message during installation that says
HpSdpAppCoreApp
"The feature you are trying to use in on a network resource that is unavailable.
Click OK to try again, or enter an alternative pathway to a folder containing the installation package "HpSdpAppCoreApp.msi" in the box below."
The last time I dug through some files on my own, bad things happened.
Thanks,
C

good gracious, Chris ...
okay, try applying the general advice on installation problems given here:
http://docs.info.apple.com/article.html?artnum=93976
... and the InstallShield Tips and Pointers are also helpful with these less-well-documented errors:
http://consumer.installshield.com/faq.asp#ts
keep us posted.
love, b

Installation problem on SUSE 12.1

Hi
I'm a Linux beginner and I am trying to install LV on SUSE 12.1
I've also posted my problems on Lava:
http://lavag.org/topic/15240-labview-installation-problem-on-suse-121/
The installation started and it looks quite all right, but when I try to start LabVIEW, the application just sits in the taskbar for about 20 seconds and then just disappears.
Any ideas?
Is there a way to debug to see what's going on?
Cheers,
Mike
Solved!
Go to Solution.

Hi Mike,
Unfortunately, there are no versions of LabVIEW supported on SUSE 12.1 at present. Here's a link to LabVIEW version compatibility with different Linux distributions. I saw from your other forum that you're attempting to install LabVIEW 2009, which is certified for SUSE 11.0 at the latest.
Best,
Dan N
Applications Engineer
National Instruments

Installation Problem on Win8

Hello all
I need your help for troubleshooting an installation problem on a Win8 (x64) client. There is already JavaJRE installed, but we wanted to install some other versions, too. But it didn't work. So we tried to unistall to curently version. This was running badly. Now there entry is removed from windows software, but the software is still on the system. Always if we try to install any java, we get a failure message with no error discription. So we looked for some installation logs, but I can't find the problem. Can you have a look? What can I do?
Thank you guys for your support.
Installation Logs:
java_install.log - Pastebin.com
java_install_reg.log - Pastebin.com
JavaDeployReg.log - Pastebin.com

Hi people!
I have two problems with nokia suite...
first of all I can't install it at my windows 8.1, I receive the message attached...
Second,
in another notebook, all time I tried to update my N8 to Symbian bella I receive a blue screen of death, at windows 8
can somebody help me?
Attachments:
mokiasuit.png ‏13 KB

Installation problem on RHEL4 ..

Installation problem on RHEL4 (Red Hat Enterprise 4) i have
install start at unzip tar.gz and tar -xf .... now i have run
./installFMS it show
./fmsini: error while loading shared libraries: libstdc++.so.5:
cannot open shar
ed object file: No such file or directory
ERROR: Your are running the Macromedia Flash Media Server
installer
on the wrong platform.
it not support for fedora or anything else?
plz help....

would be nice if someone responded to this.... Macromedia
wouldn't have been this lax in giving a reply :) AND they keep up
with OS updates too :)

Xp_logininfo Installation problem

Hello gurus,
I'm facing the same problem as described in this link:
Re: xp_logininfo "Installation problem on windows 2003 with Sql 2005"
the error I get is similiar:
<i>The below message comes from executing the command master..xp_logininfo '<domain>\<user> ' Msg 15404, Level 16, State 11, Procedure xp_logininfo, Line 62 Could not obtain information about Windows NT group/user '<domain>\<user> ', error code 0x534. The statement has been terminated</i>
but I just don't get how to solve it.
-I've tried to use the profiler but didn't find any information that will help me to solve.
-One of the guys wrote to add "logon rights" to the user ... what does it mean ?
Please advice,
Dimitry Haritonov

Hi sven,
Thank you very much for the quick and direct answer.
The problem was that the user that runs the SQL SERVER service didn't have authorization to retrieve information from active directory.
I've changed the service user, run the sapinst again, and after it succeeded I've returned the previous user.
Best regards,
Dimitry Haritonov

Oracle database 11g release 2 installation problem on windows 7 (64-bit)

First of all my windows is not genuine, but on my friend's desktop oracle download and installation worked fine, he chose "create and configure database" options, and it works very well on his desktop, though his windows is also illegitimate. In my case, when I select "Create and configure database" option and pressed 'next",
(Go to my blog to see it with snapshots: Computer Science: Oracle database 11g release 2 installation problem on windows 7 (64-bit))
it asks to select class, I select "Desktop class" and pressed "next". The moment I pressed "next", the whole setup thing disappeared like it was never started. I searched for all possible reasons for why its not getting installed on my laptop, I used registry cleaner s/w, deleted 25 GB of data to create free space if it were the problem, increased the virtual memory to increase the space for RAM, I did almost everything to get this setup working, but I found no success with the "Create and Configure database" option
and
then
I chose a "database software only" option and chose to store in a folder w/o spaces. This way, I got database s/w only and then later I found "Database configuration Assistant (DBCA)" from windows START button and clicked to create and configure database manually. The steps are pretty much interactive and doesn't involve much brainstorming.
The values I filled for
1) Global Database Name : orcl
2) System Identifier : orcl
3) I chose common password for both SYS and SYSTEM
4) while on Enterprise Manager Configuration step, It asked me to create and configure listener in oracle home, so for that too, I typed "netca" in windows START menu and clicked it. There I added a listener.
5) I chose a Storage area which was the Oracle-home itself i.e. where our installation files goes , in my case it is : C:\oracle_base\product\11.2.0\dbhome_1\oradata
6) Then after few more nitty-gritty clicks, we are set to go !
Finally to write SQL code and to create your first TABLE , type "sqlplus" in windows "START" menu and click it when it appears. A command-prompt like window appears , which will ask you for username and password, so here they are :
Username : sys/ as sysdba
Password : (its the one you created in step 3 stated above )
After this you are ready to write your first SQL command.

Is this your solution to your original post at Oracle database 11g release 2 installation on windows 7 (64-bit) ?
Pl be aware that you should not create any custom objects in SYS or SYSTEM schema - you should create any such objects in a separate custom schema.
About Database Administrator Security and Privileges

Lightroom 3.2 Installation Problem on Windows 7 64-bit

Lightroom 3.2 Installation Problem on Windows 7 64-bit
I can't install Lightroom 3.2 (German) on my computer (Windows 7 Professional 64-bit).
While copying the extracted program files the following error message appears:
An error occurred during the installation of assembly component {6435B7C0-E0C8-3EA2-91AE-7640034EAFCE}. HRESULT: 0x80070002.
I found out that other users had the same problem, and couldn't find a solution.
Perhaps it is a Microsoft .NET Framework related problem. But after installing .NET Framework 4 nothing changed.
Thanks for ideas to solve the problem.

Thanks for your advice, Mr. McLion.
I downloaded the 3.4.1 version and started the installation as administrator. Unfortunately the same error message occured again.
Then I tried to install the 32-bit version (although I prefer a 64-bit program on a 64-bit operating system). A similar error message appeared at the same point of installation progress, but with another combination of numbers and letters in brackets.

Installation problem for Java EE 5 SDK Update 2

Hi ,
I have jdk1.5.0_12 (J2SE) installed on my Windows XP. Now i am trying to install J2EE on my machine.I tried to install it twice but it comes to a halt after completing 45% at the same jar file. Following is the link which shows it comes to a halt.
http://img141.imageshack.us/my.php?image=j2eeinstallhangupav8.png
Also I wanted to know if I uninstall the J2SE and then install only J2EE will that be fine.Because I believe J2EE is a superset of J2SE ?
Thanks in advance.

For the difference between Java EE and Java SE read here:
http://java.sun.com/javaee/5/docs/firstcup/doc/p3.html
For the installation problem, I don�t know how to help you... maybe here you can find some ideas:
http://forum.java.sun.com/thread.jspa?threadID=738559
Andrea

PPStream installation problem on Windows 7

I just recently install bootcamp and use bootcamp to install windows 7 pro. Everything seems fine until i download PPStream and install it. The installation process was smooth just like usual. However, when it finishes installing, it asked me if i wanna open the PPStream. and i said yes. guess what, nothing happened, then the PPStream icon on desktop is not a normal app icon, it's like a unknown file icon with the reflash arrow on the bottom right corner.
I thought it might be the installation problem, then i went into Control Panel and uninstall the app, and reinstall PPStream, the same thing happened, and every time i click the PPStream icon on desktop, windows explorer stopped working. Anyone knows what's going on or got experience like this before? i will appreciate for any input. thanks

很简单。你子安装的过程中。看一下安装的目录。默认是安装在苹果的系统盘里的。而这个盘是只读的。所以管理器会崩溃。只要改到c盘的目录就可以了。
very easy, reinstall pps. when install pps directory change e : drive ---- to c: drive ... you area set to watch

Installation problem w/Vista

Boot Camp/Vista installation problem
MacBook 2GHz Intel Core 2 Duo, 2GB RAM, Snow Leopard 10.6.2.
Trying to install Windows Vista Home Premium using Boot Camp.
Started Boot Camp Installer and created 32GB partition. Inserted Vista disk as instructed and clicked on Start Installation.
Black screen appeared looking like this:
1.
2.
Select CD-ROM Boot Type: _
That last underline was flashing, waiting for input.
First off, I don't know what to type in, but . . .
The keyboard appears to be disabled because no keystroke registers, nor Return/Enter. Even pressing caps lock or num lock fails to register a light on those keys.
The only way out is to hold down the power key until shutdown, then restart with Eject key depressed to eject Vista disk.
Any suggestions would be appreciated.

Hi RebelGood,
have a look here http://forums.macrumors.com/showthread.php?t=467704 for instructions/solution.
Basically you have to make yourself a copy of your Vista disc using the files of that disc and a programm called oscdimg.exe plus a burning program.
And it had to be done on a Windows PC or in virtualized Windows (using Parallels/Fusion/VirtualBox) on your Mac.
Regards
Stefan

Installation problems on Solaris 9

I am having issues installing the base software and can't seen to figure
out how get past this. The error message from the installation log is as
follows:
Accept terms of Software License Agreement? [R] y
pwd: cannot determine current directory!
/tmp/installwnaWXF/checkinstallynaWXF: no home directory
Error during installation. Setup will now exit.
Please correct any errors described in /tmp/tta_inst.log, and then try
again.
Cleaning up temporary files...
# cat /tmp/tta_inst.log
**snip**
Processing package instance <tta> from </tmp/ttainst_1/ttapkg.15978/pkg>
Tarantella Secure Global Desktop Enterprise Edition for SPARC Solaris 2.8+
(SPARC) 4.10.903
Tarantella, Inc.
pkgadd: ERROR: request script did not complete successfully
Installation of <tta> failed.
No changes were made to the system.
Script detail for package <tta>
---> checkinstallynaWXF
Any help from here would be appreciated.
gavin

from the diagnostic details:
Architecture           spso0509
Host           SunOS e220r 5.9 Generic_117171-17 sun4u sparc SUNW,Ultra-60
Package           Tarantella Secure Global Desktop Enterprise Edition for
SPARC Solaris 2.8+ (4.10.903)
Package           Tarantella Secure Global Desktop Enterprise Edition Andrew
Fonts (4.10.903)
Package           Tarantella Secure Global Desktop Enterprise Edition Hangul
Fonts (4.10.903)
Package           Tarantella Secure Global Desktop Enterprise Edition Platform
Identity Pack for SPARC Solaris 2.8+ (4.10.903)
Package           Tarantella Secure Global Desktop Enterprise Edition Security
Pack for SPARC Solaris 2.8+ (4.10.903)
Package           Tarantella Secure Global Desktop Enterprise Edition Windows
Connectivity Pack for SPARC Solaris 2.8+ (4.10.903)
Bill Weir wrote:
Gavin,
Glad you're sorted. Can you confirm that it is 4.10.903 you are using
(not 4.00.903)? I'm concerned if this installation problem is still
present in the later version.
Bill
Gavin Westermann wrote on 31/08/2005 05:00:
Bill - that seems to have done the trick! the installation is now running.
Thanks so much for this.I am running a pair of Sun Ray 170's on my desk
here at home mated to an E220R. I am hoping to use Tarantella to be able
to access and run apps on a win3k server in the same rack.
Gavin
Bill Weir wrote:
Gavin,
This looks like a known problem with TTA 4.00.903 and some Solaris
patches which were distributed at about the same time. However, you say
you're using 4.10.903, and as far as I know the problem should be fixed
in that version.
You could try the workaround described in
http://www.tarantella.com/documentation/sgd/ee/4.0/install.html - search
for "tta_pkgadd" on that page and follow the instructions given there.
Regards,
Bill Weir, Sun Microsystems Inc.
Gavin Westermann wrote on 30/08/2005 05:06:
I am having issues installing the base software and can't seen to figure
out how get past this. The error message from the installation log is as
follows:
Accept terms of Software License Agreement? [R] y
pwd: cannot determine current directory!
/tmp/installwnaWXF/checkinstallynaWXF: no home directory
Error during installation. Setup will now exit.
Please correct any errors described in /tmp/tta_inst.log, and then try
again.
Cleaning up temporary files...
# cat /tmp/tta_inst.log
**snip**
Processing package instance <tta> from </tmp>
Tarantella Secure Global Desktop Enterprise Edition for SPARC Solaris 2.8+
(SPARC) 4.10.903
Tarantella, Inc.
pkgadd: ERROR: request script did not complete successfully
Installation of <tta> failed.
No changes were made to the system.
Script detail for package <tta>
---> checkinstallynaWXF
Any help from here would be appreciated.
gavin

11i installation problem on NT 4.0 SP6a

I have one 11i installation problem:
envoirment: NT 4.0 sp 6a MEM 394MB, cpu 550MHZ HD 40GB
install MKS, GNUMAKE (3.79), VC++, JDK 1.3 before Apps install.
And I could see which, gnumake.exe on DOS prompt. But the error
message say:
" which command is available; gnumake is not
available."
I already set the path varible path=C:\MKSTOO~1\bin;C:\MKSTOO~1
\bin\x11;C:\MKSTOO~1
\mksnt;C:\VStudio\Common\Tools\WinNT;C:\VStudio\Common\MSDev98
\Bin;C:\VStudio\Common\Tools;C:\VStudio\VC98
\bin;c:\make\WinDebug;c:\make\WinRel
How to fix this problem?
Any comments will be appreciated.

Actually, I already did this and found that this works correctly. I guess it
was the "install to d:\\weblogic600" that threw me off...
Thanks,
Robert
David Felts wrote:
Please add "\" after "d:"; this should work. We'll look at making this more
user-friendly for Beta 2.
Robert Patrick wrote:
I tried to install the current beta 1 version of WLS 6.0 today after
uninstalling the pre-release version that I had previously installed
with no problems. The problem is that when I try to set the "BEA home"
to the existing location ("D:" -- so that the product ends up in
D:\weblogic600), the installer claims that I do not have write
permission to that directory. This is hogwash since I am logged in with
administrative priviledges and was easily able to install the
pre-release copy like this (and yes, I have deleted the previous
directory).
Any thoughts?
Robert

Oid installation problems

Similar Messages

Maybe you are looking for