Oil got into my ipod and now it will not work at all is it worth fixing or should i just get a new one

Oil got into my ipod and now it will not work at all is it worth fixing or should i just replace it with a new one ?

Replace it.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

Similar Messages

TS3376 After I opened find my iphone app, it erased everything on my ipod and now it is not working right. How do I fix this?

After I turned the "find my iphone" app on to locate my daughters ipod from my iphone, it erased everything on her ipod. Now it is not working right. How can I fix this?

Welcome to the Apple Community.
Restore it from a back up.

Got a replacement Ipod Touch 3rd Generation and backed up to store version on computer and now it will not work. Goes into restore mode but cant restore. Any suggestions?

Got a replacement Ipod Touch 3rd Generation and backed up to store version on computer and now it will not work. Goes into restore mode but cant restore. Any suggestions

What happens when you try to restore? Error message?

Tried downloading itunes version 11.4 and received an error code 2324. Now itunes will not work at all and I cannot sync my phone, ipad or ipod. How should I proceed?

I have tried several times to load version 11.4 and keep getting an error code2324, now I cannot sync any of my apple products. I set my machine to a previous recover date, now iTunes will not work at all. I get a message stating I do not have the administrator rights to download. Any thoughts on this issue?

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

Tried to run ios5 upgrade, get unkown error 0xE8000065 and now ipad does not work at all and is frozen can not even switch off

tried to run ios5 upgrade, get unkown error 0xE8000065 and now ipad does not work at all and is frozen can not even switch off

Try a hard reset and go from there. You might try a manual install (using DFU Mode), as outlined in the link below.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
 In Memory of Steve Jobs 

I updated Firefox and now it will not open at all. The hourglass shows that it's working but then nothing. I went to add/remove and removed mozilla and reinstalled it and still the same thing. It worked fine before I updated.

I updated Firefox and now it will not open at all. The hourglass shows that it's working but then nothing. I went to add/remove and removed mozilla and reinstalled it and still the same thing. It worked fine before I updated. Now I can't even remove the program at all. Why is this happening?

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
Create a new profile as a test to check if your current profile is causing the problems.
See "Basic Troubleshooting: Make a new profile":
*https://support.mozilla.com/kb/Basic+Troubleshooting#w_8-make-a-new-profile
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
If that new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
See:
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

My iphone will not turn on.... it froze earlier today and now it will not turn on all i get is a black screen with the apple symbol every once in awhile... also it will not connect to my computer so i can reset it to factory settings

My iphone will not turn on.... it froze earlier today and now it will not turn on all i get is a black screen with the apple symbol every once in awhile... also it will not connect to my computer so i can reset it to factory settings

Sammyhunter lets get you back in action! Has there been any physical/water damage to the device? Try pressing and holding the home and power button together. Once the Apple symbol appears release both buttons. Keep us posted!
AshleyS_VZW
Follow us on Twitter @VZWSupport

I was told I had to upgrade Firefox to 4.0, downloaded the dmg, launched it and now Firefox will not open at all.

I was told I had to upgrade Firefox to 4.0, downloaded the dmg, launched it and now Firefox will not open at all. It tells me "The operation can't be completed because you don't have permission to access some of the items." Also, that "Firefox cannot be opened because of a problem." And it give a bunch of code. This is my main browser. What is happening here? My OS X is 10.6.7. Has this caused a problem?

If you right-click on your Photoshope.exe, select Properties, there should be a Compatibility tab. There you can select Windows XP, Windows 2000, Winows 98 or 95. One of these should allow you to open Photoshop 6, unless you mean CS6.

TS2518 I upgraded to Aperture 3.4 this morning, and now it will not open at all! It crashes every time, and tries rebuilding the library and repairing most times. The Library open fine in Iphoto

Every time since I upgraded this morning, attempting to open Aperture causes a crash. I upgraded to Aperture 3.4 this morning, and now it will not open at all! It crashes every time, and tries rebuilding the library and repairing most times. The Library open fine in Iphoto

If you do not have the original install DVDs, use the Aperture Trial installer instead:
Try if this download link for the trial version still works: if yes, you can unlock it with your serial number:
http://appldnld.apple.com.edgesuite.net/content.info.apple.com/Aperture/061-8328 .20101020.AprE3/ApertureTrial3.1.dmg
Regards
Léonie

Silverlight 5 WebBrowser Control - Is the SL5 WebBrowser control is set to work in IE7 mode only? I have a 3rd party web site i'm hosting and now they will not work with IE 7 Compatibility mode. Looks like this control can't detect I'm setup for IE 9.

Silverlight 5 WebBrowser Control - Is the SL5 WebBrowser control is set to work in IE7 mode only? I have a 3rd party web site I'm hosting and now they will not work with IE 7 Compatibility mode. Looks like this control can't detect I'm setup for IE 9. I'm
running IE 11 with registry hack for IE 9. I think the SL5 webbrowser control is set to work only in IE 7. can some one verify this or tell me how to set the WebBrowser control up to run either IE8, 9, 10 or 11? I have same issue with machines running IE 8
and above. This Silverlight 5 application is running out of browser with the elevated privileges (hack) and at test certificates install in proper stores. This application has been running for 2.5 years. Vender switch on some changes a couple days ago that
broke this application. Help!!

Hi,
It seems there is nothing to do with IE mode.
Please make sure your link still can be accessed.
The WebBrowser displays HTML content in applications running in a Silverlight 4 or later out-of-browser applications or in Silverlight 5 in-browser trusted applications only.
For more infromation,please check link below:
http://msdn.microsoft.com/en-us/library/system.windows.controls.webbrowser(v=vs.95).aspx
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

HT4367 I turned off the power to my apple tv whilst updating and now it will not work, i have tried to restore using usb but it says unable to find. any help please?

I turned off the power to my apple tv whilst updating and now it will not work, i have tried to restore using usb but it says unable to find. any help please?

Welcome to the Apple Community.
Are you following these instructions.
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Source list, and then click Restore.

I have reset my ipad using General Reset Erase All Content and Settings. And now it will not boot. All i see on screen is the Apple logo. What do i do?

I have reset my ipad using General > Reset > Erase All Content and Settings. And now it will not boot. All i see on screen is the Apple logo. What do i do?

When you restore, you can restore to factory settings or to a backup. Restoring to factory settings removes everything and takes you back to out of the box status and you start all over again. Restoring from your backup will replace all of your app data, bookmarks, email settings and things like that. You still may need to sync all of your purchased apps and music, photos and so on back to the iPad.
I assume you want to restore from your backup to put all of you data back on the device so connect the iPad to your computer, launch iTunes, right click on the device name on the left side under the devices heading and select restore from backup. After you restore from your backup, make sure that you sync all of your other content with iTunes.

I have accidentially added a video to the photostream upload and now it will not work

I have accidentially added a video to the photostream upload and now it will not work, it would not let me delete the video from the upload file, so I have uninstalled icloud from PC and deleted all the folders. And started again, but still not working

You supply little pertinent about the MBP and the iPhone.
First... on the MBP... Click on the Apple icon.. Top left in Finder...
 > About this Mac > Version...what does it say?
Which iPhone and what is its' iOS Version.

I just updated to OS X Mountain Lion and now Word will not work?

I just updated to OS X Mountain Lion and now Word will not work?
Word, Powerpoint, Excel - none of them work. . . . Any ideas?

You can also try Pages for Word / Numbers for Excel. Both can import/export Word and Excel files.

I have the i phone four and just uploaded to my computer and now it will not work has the apple logo with a long oval bar under it

i have the i phone four and just uploaded to my computer and now it will not work has the apple logo with a long oval bar under it

It may be that it is stuck loading. You will want to probably first attempt a Hard Reset (Home Button + Power Button for 5-10s until it restarts with an Apple Logo then let it load up) and see if this will get it working.

Oil got into my ipod and now it will not work at all is it worth fixing or should i just get a new one

Similar Messages

Maybe you are looking for