Oil paint filter: The operation could not be completed

And this is just one of the problems I am getting. I'm running Win7 64bit, photoshop cs6 (also 64bit), have an i7 2600 and 16GB of RAM and an ati 5870 card running the latest drivers (12.8)
So, the operation could not be completed whenever I try to run the oil paint plugin and when I try to use the iris blur, my canvas goes blank. If I pull it out of docked mode and put it in a window, it's still blank until I move the window about and I can see my image, but as soon as I stop moving the window around, it's blank again.

Thanks for the advice. I had found that suggestion elsewhere on the site after I posted and just finished a reinstall of drivers. That fixed the problem with liquefy and oil paint. However, I still have issues with the first three Blur filters: field, iris, and tilt shift. All three cause the canvas to go black when run and no matter what I do I cannot restore the image without exiting photoshop. If I close the window that is now black and reopen the original file (unsaved after the error) without exiting I still get a blank canvas. In order to be able to view that file again I need to close down photoshop completely. Then upon restart I can open and view the file.
If I completely disable "Use Graphics Processor" in the performance preferences then the filters work like normal.If I reenable they go back to the the black canvas behavior. I also tried leaving the "use graphics processor" enabled and changing the subsettings such as Drawing mode and none of those changes helped... the graphics processor needs to be completely disabled.

Similar Messages

  • Photoshop CS5 filter gallery 'the operation could not be completed'

    with photoshop cs5 i get for a specific regular user when selecting filter gallery the error message 'the operation could not be completed'. all other users on the same mac show no problems. ???

    Thanks for your answer, but none of the solutions worked. Still the same error message.
    Am 22.06.2010 um 17:04 schrieb Jeffrey Tranberry:
    You could try running the permissions utility on this page (solution 1) to see if Chris's guess is correct:
    http://kb2.adobe.com/cps/845/cpsid_84517.html
    You could also post/submit your crash report from running in 32bit with your email address. That may yield some additional clues.
    >

  • "The operation could not be completed" Error

    Every time i try to open the pixel bender filter I get an error that says "The operation could not be completed" Any Ideas?  Windows 7 i5 processor and 8 gb of ram. I tried re installing, and several images from small to max size.
    Thanks

    Perhaps your issue has been resolved by now.  I read all the responses as I was also having the Error:
    The operation could not be completed." message and this is how I resolved it.  I have Win XP with
    3Gb Ram,and the same graphics card you referenced, by Nvidia.  I looked as the document size and it was at 370 dpi so I dropped it down to 72 and saved it.  Then I had no problem opening Pixel Bender and using the various filters in it.

  • PS CS5 The operation could not be completed. A file system I/O error has occurred

    Howdy...
    I'm using Photoshop CS5 and when I go to use a handful of filters such as Liquify or Lens Correction I am suddenly getting an error message saying:
    "The operation could not be completed. A file system I/O error has occurred"
    Doesn't matter if it's a massive file or a small one. Sometimes the Liquify box will actually come up, but after I make one or two strokes, the beachball comes up and moments later I get the error message again. It doesn't actually crash PS, it just prevents me from using those filters. Each time I click, the error message comes up again. I've also tried it with my PS CS3 on the same Mac and it does the same thing. However on my 4 year old MacBook Pro, it's absolutely fine. Grrrrr!
    I have my PS set as default on 64 bit. I have a scratch disk with nearly 500gb free (which is not my start-up disk) I am running a Mac Pro 2.8 GHz 8 Core Intel with 16gb of ram, so it's not a memory problem. Running Mac OS 10.6.7 but did the same on 10.6.6 too.
    I have repaired the disk permissions on the start-up disk. I have reloaded a fresh copy of PS (a few times). Even did a hard Un-install with maccs3clean after trying a regular Un-install with no success.
    I had an 1.5hr conversation with an Adobe Tech guy earlier today and he's scratching his head, so I'd thought I'd throw it open to you guys hoping someone has had the same problem and can save the rest of my hair from being pulled out.
    HELP!

    Hi Guys,
    I know this is an old post but I need to bump it.
    I work for a image processing company and we all sit on top spec mac pro's with 16-32 GB of RAM, top graphic cards and SSD drives.
    All of my collegaues' computers are working fine when it comes to using liquify and all of the filters that come with CS5, but it sure doesn't work on my mac at all.
    We have a tech guy who has re-installed the OSX on a new SSD drive now two times and we have started from scratch with installing CS5 but it still will not work. I keep getting "the operation could not be completed..." every time i try
    to liquify or do any other filter work.
    I am 100% sure it doesn't have to do with any disk permissions or broken drives in my case.
    Could there be an issue with the graphic card or any other hardware component since it's clearly not a software related issue?
    Any help would be much appreciated because we are very much in the dark here.
    Best regards,
    Anders

  • Launch PB in CS5 and get "The operation could not be completed."

    I had been using the PB plug-in previously and it worked fine.  Since that time, I have installed no new hardware or drivers but have installed Topaz Adjust 4 filter.  Now, when I have an image opened in PS CS5 and I click Filters -> Pixel Bender -> Pixel Bender Gallery... I get a modal dialog with the title Error and the message "The operation could not be completed."  I tried reinstalling the extension and no luck.
    Here's some relevant info:
    Adobe Photoshop Version: 12.0.1 (12.0.1x20100625 [20100625.r.1146 2010/06/25:17:40:00 cutoff; r branch]) x32
    Operating System: Windows XP 32-bit
    Version: 5.1 Service Pack 3
    System architecture: Intel CPU Family:15, Model:2, Stepping:9 with MMX, SSE Integer, SSE FP, SSE2
    Physical processor count: 2
    Processor speed: 3073 MHz
    Built-in memory: 2045 MB
    Free memory: 360 MB
    Memory available to Photoshop: 1634 MB
    Memory used by Photoshop: 60 %
    Image tile size: 128K
    Image cache levels: 4
    Display: 1
    Display Bounds:=  top: 0, left: 0, bottom: 1050, right: 1400
    Video Card Number: 1
    Video Card: NVIDIA GeForce FX Go5600 (Sony)
    Driver Version: 6.14.10.4690
    Driver Date: 20031106141200.000000-000
    Video Card Driver: nv4_disp.dll
    Video Mode: 1400 x 1050 x 4294967296 colors
    Video Card Caption: NVIDIA GeForce FX Go5600 (Sony)
    Video Card Memory: 64 MB
    Application folder: C:\Program Files\Adobe\Adobe Photoshop CS5\
    Temporary file path: C:\DOCUME~1\matt\LOCALS~1\Temp\
    Photoshop scratch has async I/O enabled
    Scratch volume(s):
      Startup, 73.2G, 12.2G free
    Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS5\Plug-ins\
    Additional Plug-ins folder: not set
    ...snip...
    Installed plug-ins:
    ...snip...
       Pixel Bender Gallery 12.0
    ...snip...
       Topaz Adjust 4 10.0
    ...snip...
    Plug-ins that failed to load: NONE
    Flash:
       Mini Bridge
       Kuler
       Access CS Live
       CS Review
       CS News and Resources
    Installed TWAIN devices: NONE

    I take it you've rebooted your machine a few times since all this has happened? Something must have changed to cause this problem. You could try deleting the Photoshop preferences and the Pixel Bender plugin preferences. You doublechecked that you have the latest drivers from nVidia (and you did so by manually comparing the result provided on the nVidia driver page with the driver version found in the Display preferences? Are you running on a laptop? If so, who is the manufacturer?

  • Der Vorgang konnte nicht abgeschlossen werden / The operation could not be completed

    Erhalte folgende Fehlermeldung beim Verwenden vom Glasfilter und Laden einer Struktur: Der Vorgang konnte nicht abgeschlossen werden.
    Kann keine Struktur auswählen die Fehlermeldung erscheint sofort. Verwende PS CC und ein Mac Book.
    Woran liegt das?
    Danke für die Hilfe.
    Nachtrag: Auf dem gleichen System hab ich PS 5.1 - hier funktioniert alles bestens.
    English:
    Receive the following error message when you use the glass filter and load a structure: The operation could not be completed.
    Can not a structure select the error message appears immediately. Use PS CC and a Mac Book.
    I do not know if the error message in English is the same text.
    Why is that?
    Thanks for the help.
    PS: On the same System run PS 5.1 - here is all ok.

    see
    http://demonknight9.blogspot.co.uk/2012/11/iphoto-942-and-safari-602-issues.html
    also available here
    NSURLErrorDomain -1100.
    use the link below  for safari 6.0.2 update
    http://swcdn.apple.com/content/downloads/53/02/041-8081/2jwp4wjrwygtm4lc608qy4h0 n4a9yyq37g/Safari6.0.2Mountain.pkg
    or
    http://bitly.com/SBV9Cx+
    And iPhoto can be downloaded from Apple Support:http://support.apple.com/downloads/.

  • Error while consolidating. The operation could not be completed.

    Error while consolidating. The operation could not be completed. Cocoa error 13. (null)
    Got this when I was trying to consolidate some referenced photoshop files. If failed to create a new version as well when I tried to open the files in Photoshop. I rebuilt the the library and it displays and exports both masters and version just fine, but it won't let me consolidate the master to the library.
    What gives?

    I think that error was due to the fact that I hadn't upgraded MAC OSX after installing it. I have done that now and now I get another error saying the masters are offline.
    I found this old thread: https://discussions.apple.com/thread/1965601?start=0&tstart=0 which seems to be the same problem. This is a whole other topic so I will start a new thread, but leave this in case anyone gets the same problem as me. Upgrade your OSX. That's the solution :-)

  • Hi Friends... I'm trying to delete a back-up file on mu TC but I get the message "The operation could not be completed because the item "bands" is in use. I'd like to start the Back from scratch, could help me out with deleting the current file?

    Hi Friends...
    I’m trying to delete a back-up file on mu TC but I get the message “The operation could not be completed because the item “bands” is in use. I’d like to start the Back from scratch, could help me out with deleting the current file?

    Sorry, I am very confused. I asked the following question....
    Is this the only backup file on your Mac, or do you have other backup files and data on the Time Capsule disk?
    The answer that you gave was....
    This is the only one
    Now you are saying that....
    But I have lots of other files on Time Capsule! The back up file is only one of them.
    Can you clarify, please?

  • IMovie error message "The operation could not be completed"

    I am trying to create a new movie and got this error message " The operation could not be completed" after selecting the Themes.
    Any suggestions?
    Thanks

    My problem was because I had moved my Movies folder from the system drive (which is an SSD) over to another drive with a larger capacity. I then created an Alias in my home folder.  Turns out this is what was causing the problem. I shoulda known. Some apps absolutely hate this. iMovie, being the dumbed down garbage that it is, simply MUST have it's library in a certain folder, apparently. Would be nice if we had a choice about it.
    I find Premiere Elements is actually the better (and friendlier) program. However in this case, I had to slum it with iMovie due to the Quicktime file I was working with.

  • The save for the web function has stopped working in my copy of photoshop elements 12.  I get this message, " The operation could not be completed.  The system cannot find the path specified" Resetting preferences did not fix.

    The save for the web function has stopped working in my copy of photoshop elements 12.  I get this message, “ The operation could not be completed.  The system cannot find the path specified” Resetting preferences did not fix.

    my os is windows 7.  elements 12 worked fine for many months then save for the web stopped working

  • The share operation "master file" has failed. the operation could not be completed because an error occurred creating Frame 93164 (error-1). how can i find the frame?

    The share operation "master file" has failed. the operation could not be completed because an error occurred creating Frame 93164 (error-1). how can i find the frame?

    https://discussions.apple.com/thread/6219522

  • The operation could not be completed because an item with the name xyz already exists

    I am trying to make a click and drag backup on an external FAT 32 drive to compliment my Time Machine backup (long story) and I've done this each time by dragging my critical folders into the drive. I get a message asking me to stop, replace or skip, and whether to apply to all items. i click replace, apply all, and let it go.
    however, one stubborn folder refuses to comply. every single time I click and drag a group of folder that includes that one, I get a message saying "the operation could not be completed because an item with the name xyz already exists" even after I selected the the "apply all" prompt. at which point, the Mac stops transferring ALL the other files.
    I figured, OK, i'll just transfer the other folders individually and then deal with this folder later. so I do that, and once I get to the offending folder, I try to transfer just that one folder into the drive. no good; I get the operation message again. I decide to just transfer the contents of the folder, rather than the folder itself. No good, I just get the operation message about one of the folders within the main folder.
    anyone know the cause, or at least a fix?

    If you've installed a system modification called "TotalFinder," remove it according to the developer's instructions after backing up all data. Log out, log back in, and try again.
    Otherwise, open the Info dialog on both the source and the destination volumes. What is the Format of each? For example, it might be "Mac OS Extended (Journaled)".
    For some other possible solutions, see:
    operation can't be completed because an...: Apple Support Communities

  • 'The operation could not be completed. Access is denied' during delete.

    Hello World,
    Something happened while working in my Visual Studio 2010 Professional environment.
    When I delete a member from my Solution Explorer, it disappears from the memberlist, is marked as 'locked, deleted' and can be removed from TFS using Check-In. But during the delete process I get the message 'The operation could not be completed. Access
    is denied.'
    I'm an Administrator on my computer (manually adding/deleting members in my workspace and/or directly in TFS is not a problem). I get this message for every delete I perform, even in other Solutions!
    The member will remain in my workspace however. 
    Can anyone help me with this problem please?
    Thanks,
    Guy Swagen
    Microsoft Visual Studio 2010
    Version 10.0.40219.1 SP1Rel
    Microsoft .NET Framework
    Version 4.0.30319 SP1Rel
    Installed Version: Professional
    Microsoft Office Developer Tools   01018-532-2002181-70270
    Microsoft Office Developer Tools
    Microsoft Visual Basic 2010   01018-532-2002181-70270
    Microsoft Visual Basic 2010
    Microsoft Visual C# 2010   01018-532-2002181-70270
    Microsoft Visual C# 2010
    Microsoft Visual C++ 2010   01018-532-2002181-70270
    Microsoft Visual C++ 2010
    Microsoft Visual F# 2010   01018-532-2002181-70270
    Microsoft Visual F# 2010
    Microsoft Visual Studio 2010 Team Explorer   01018-532-2002181-70270
    Microsoft Visual Studio 2010 Team Explorer
    Microsoft Visual Web Developer 2010   01018-532-2002181-70270
    Microsoft Visual Web Developer 2010
    Crystal Reports Templates for Microsoft Visual Studio 2010   
    Crystal Reports Templates for Microsoft Visual Studio 2010
    Java language support for Visual Studio   1.0
    Java language tools for Visual Studio includes IntelliSense and more... eventually...
    Java project support for Visual Studio   1.0
    Java project system for Visual Studio
    Micro Focus Enterprise Developer Team Edition 2.2   Serial number: xxxxxxxxxxxxxxxx
    Micro Focus Enterprise Developer Team Edition 2.2 Version 2.2.01204.
    Serial number: xxxxxxxxxxxxxxxx Full license
    For more information, visit http://www.microfocus.com.
    Copyright (C) Micro Focus 1984-2014. All rights reserved.
    Micro Focus Rumba Integration   1.0
    Micro Focus Rumba Integration is a Visual Studio package which provides connectivity to Mainframes.
    Microsoft Team Foundation Server 2010 Power Tools   10.0.41206.0
    Power Tools that extend the Team Foundation Server integration with Visual Studio.
    Microsoft Visual Studio 2010 Professional - ENU Service Pack 1 (KB983509)   KB983509
    This service pack is for Microsoft Visual Studio 2010 Professional - ENU.
    If you later install a more recent service pack, this service pack will be uninstalled automatically.
    For more information, visit http://support.microsoft.com/kb/983509.
    Microsoft Visual Studio 2010 SharePoint Developer Tools   10.0.40219
    Microsoft Visual Studio 2010 SharePoint Developer Tools
    Microsoft Visual Studio Process Editor   1.0
    Process Editor for Microsoft Visual Studio Team Foundation Server

    Hi GuySwagten,
    Based on your description, the files you're trying to delete are locked by other team members of your team project in server workspace. You can have a check with your team members or check the hisotries of the files to see the lock information.
    Please refer to this
    page to get more information about TFS lock types. And you can ask the team member to unlock the files if you want to delete them or do other operations.
    Best regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • The Operation could not be completed. No other information is available about the problem.

    MAC OSX 10.8.5
    Processor 2.7 GHz
    Memory 4GB1333 MHz DDR3
    Logic Pro 9.1.8 (1700.67) 32 BIT
    "The Operation could not be completed. No other information is available about the problem."
    Uploaded on google drive a series of project files. downloaded them and now the message above is what pops up effectively blocking me from my work. After talking with google support, they confirmed the successful upload and download with no file corruption. All file extensions are the same. Can someone please help.
    Sincerely,
    Butta Love

    Try the following..
    Compress the audio files before uploading them to Google.. using Apple's built in file compressor... (Right/Control click on an audio file and choose compress from the popup menu...
    Download from Google and then decompress audio files..
    Now test in Logic and see if you get the same issue....

  • "The operation could not be completed" using iMovie 10.0.6

    I'm using the new iMovie 10.0.6 with OS X Yosemite 10.10.
    This is the first time I access to iMovie after upgrade to Yosemite.
    When I try to begin a new movie and after select a theme the following message is shown:
    "The operation could not be completed.
    No other information is available about the problem"
    The technical information obtained from the console is:
    "13/11/14 11:46:50,195 iMovie[702]: -[NSAlert alertWithError:] called with nil NSError. A generic error message will be displayed, but the user deserves better."
    So, I can't use iMovie as I expected...
    Is anybody have this problem ?
    Thanks

    I had the exact same problem, working with apple support I had to uninstall iMovie and all the files connected with it and then download iMovie again.  The problem is you iMovie is not creating the library file it needs to save your work.
    Apple support was great at walking me through which files had to be deleted.
    good luck
    Ron

Maybe you are looking for