Oil view in the material master
Dear SAP Guru,
in our project, we share same material type with oil view activated for other Non-HPM Product. i have not maintained oil view data of material master for Non-HPM Material. But if you select oil view, the other field like UoM group , conversion group are visible as blank.
When you select oil view, System should give error message- Oil specific data not active for the organizational level. Message No. M3386
Any advise.?
Reagrds,
Dilip Chavan
SAP IS-Oil Consultant
Hi Shichang,
Requirement is to pop up error message if oil view is not maintained for Non-HPM material.
Regards,
Dilip Chavan
SAP IS-Oil (Downstream consultant).
Similar Messages
-
Accounting & costing view in the material master
hi
my client wanted to block the accounting & costing view in the material master for the end users
what i need to doHi,
You can (Authorization material master by views of accounting & costing ) achieve this by way of authorization control. In transaction PFCG, select your role for creating / changing the material master. Select option Maintenance statuses. Then at change status option select views that you want to give the authorization to the users. Create profile & save the role. Now assign the role to the users. They will get only those views you have selected. You have to select those views in all the roles related to material master (create, change, display).Better Consult Basis Consultant,
Regards,
Biju K -
Currency in the Accounting View of the Material Master
Hi everyone!
The accounting tab/view in the Material Master has currency in the General Data tab. In our case, the currency is defaulted to PHP. I found the field in SPRO but it is non-configurable. Is there anyway I could it in other SPRO field so that I could configure it to changable currencies (for example, I wanted to change from PHP to USD, etc.)
Thank you so much.It will be Picked up From the Comp Code Currency..
As the Plant is assigned to Comp Code, when you create the Material for that Plant ..
It will pick up from the Comp Code Currency..
You can check Comp Code Currency in OBY6 trxn..
Edited by: Manohar Raju on May 16, 2008 3:30 PM -
Label Data view in the material master
Hi all,
I read this SAP help portal that said "The Label Data view in the material master allows you to display or edit label data that is specific to the material. "..
may I know where I can find this view in the material master?
Thanks
KarenDear Karen,
This "Label Data" is one View in Material Master.
While creating the Material using T.Code MM01, when you are on the Selection screen of Various views, it is Last Option.
i.e. Lable Data
If this view is not there while creating the Material. then it is MM Configuration.
That view is assinged to Material Type.
See in Material Master, Industry Sector and Material Types controls these Views. So with the help of MM Consultnat you
have to get that View Configured to your Material Type.
If you find my answer satisfactory, please grant me the points.
Regards,
Amol Joshi -
Deleting QM View in the material master
Hi
Is their any way we can delete the QM view in the material master , once it is created
Thanks
JJHi
Deleting a QM view is not possible
what You can do ...is Deactivate all Inspection Types that you have assigned by QA08
or do mass changes using MM17(MARA & MARC) and remove all fields.
It is as good as removing QM view.
Note:
u can set deletion flag at plant level or client level. ONce u do that u can delete that particular material from that plant using sara transaction . But note that all view at that plant level vl be get deleted
so better to make it blank
Regards
Sujit S Gujar -
New Text in the Sales Text View in the Material Master
Hi All,
I want to create new text ID in the material master sales text tab
Can you please help me in how to create the new text for material master sales text tab view.
Regards
RajeshWell it may not be possible by standard SAP to create in Material.
AN alternative might be to use a standard text type and then call it in your Text Determination Procedure.
T-code "SO10" --> Give "Text Name & Text ID & Language --> Click at "Create" --> On next screen --> Go to (Menu) --> change editor --> Write the text which you want
Go to VOTXN , and maintain the required confirguation to get this standard Text copied to the material during order processing.
Regards
Sai
Edited by: Sai on Apr 16, 2010 1:39 PM -
How can I extract the list of fields for every view of the material master?
Hello SAPients,
Is there a table or a FM where I can extract the list of fields that every view of material master have?
I need to create a dynamic selection-screen with something like this:
Basic Data
mara-matnr
makt-maktx
mara-meins
Sales: Sales Organization Data
mara-matnr
makt-maktx
Thank you in advance.Hi
Try to run the trx OMT3B: this the customizing where the dynpro for the views are defined: perhaps u can find something can help you.
Max -
Help needed in seeing the material master.
Hi all,
How can i see the sales area info in a system. i.e. what material is assigned to what sales area, the mapping between the sales org., distr. channel, division and plants? I ask this because when I see some tabs/views in mm03, it asks me the sales area info and I dont know what to give there.. so in effect i get to see only some views in the material master.
Thanks,
Charles.Hi Charles,
If you want to know all those materials which have a Sales View, you can go to
MARA table and search for all those materials that have a 'V' in MARA-PSTAT field. Later you can use MM03 to see the sales data for that materials.
Procedure:
se16 transaction.
Give V in PSTAT field n selection criteria. and execute.
Regards,
Ravi -
Valuation class in the material master
hi all, we maintain split valuation materials, namely domestic & imported. we are working on project based scenarion planning strategy 21 : MTO/project.
in daily practice user convert unrestricted stock to project stock with 412 Q mvt type before MRP RUN.
but for some when user try to convert stock following error occurs. I check stock available, it is available. but i do not understand why this error comes.
Maintain the valuation class in the material master first
Message no. M7232
Diagnosis
The system found that you have defined your own valuation classes for sales order stock and project stock in Customizing. However, these valuation classes have not been maintained in the material master record for the materials concerned.
Procedure
So that the relevant accounts can be posted upon goods movements, you have to maintain the valuation classes for sales order and project stock in the accounting view of the material master record for the material concerned.
If you have authorization to do so, you can change the material master record.Hi,
The normal valuation stock refer to relevant table valuation class field MBEW/MBEWH-BKLAS
Special Sales Stock refert to MBEW/MBEWH-EKLAS
Projeck Stock refer to MBEW/MBEWH-QKLAS
Cheers,
Girang -
How is the Consumption tab will update in the material master?
Hi Friends,
How is the Consumption tab will update in the material master?
what are the customization required if consumption tab wants update with respective the qty?
Regards,
Hari ShankarHi Friends ,
I am very thankful to u all for your quick response,
I have tested the two materials with two movement types of 601 and 954.
when i did the 601 movement type the consumption tab in the material master has updated automatically even though i haven't maintained forecasting tab, but where as for the movement type 954 the consumption tab is not updated even though i have maintained forecasting tab view in the material master.
Is the consumption view will update based on the Material movement types?
where is the control parameter for updating consumption tab?
could you pls help me regarding this?
Regards,
Hari Shankar. -
Hello,
With regards to the material master data:
(a) are there more views to a material that are dependent on the plant except for: 'costing', 'Forecasting', 'MRP', 'Production Resources/Tools', 'Purchasing',' Quality Management' and 'Sales'?
(b) why are they dependent at the plant?
(c) why does the basic data depends on the plant?Hi Shadmi!
Here is d answers,
a) are there more views to a material that are dependent on the plant except for: 'costing', 'Forecasting', 'MRP', 'Production Resources/Tools', 'Purchasing',' Quality Management' and 'Sales'?
--- Except Basic Data1 and Basic Data2 all other views are plant dependent.
(b) why are they dependent at the plant?
--- Because these datas may vary plant by plant. For example cost of material may change from plant to plant since it depends upon in which price the vendor is supplying to you.
(c) Why does the basic data depends on the plant?
--- Not at all. Basic data view is specific to company code level.
Cheers,
Yuvi. -
View document in material master, Basic data 2 screen?
Hello gurus,
How to view a DIR assigned to material master - basic data 2?
According to help.sap.com:
Additional Function for Material Master Record:
In Customizing for the Material Master, you can define a standard document type by choosing Make Global Settings.
- Done this: assigned document type needed, created a DIR with that type and assigned it to a given material
Documents of this standard document type are displayed in the material master record, in the Basic data 2 view (Extras ® Document data).
- Information of the DIR can be seen in the main screen, no path Extras --> Document data (I know DIRs are shown behind menu path Additional data --> Documents)
You can display the original application files of a document (for example, an engineering/design drawing) directly from the object (for example, material) using a display application (viewer).
PROBLEM starts here: no icon or button to click in order to view the document although the help states so.
Any idea what should be done? Should I install a software of some sort to view? Assign it somehow with SAP? The document type here is doc (MS Word), so nothing special.
Any advice is highly appreciated.
BR,
PipsaHello Sam,
Sorry, I think I described the problem inaccurately.
I could see the document already but for that I must follow the path Additional data --> Document data.
My core question was: Is there a means to allow a user to display the document directly in the screen Basic data 2 since system creates a new subscreen called Design documents assigned anyway?
It seems that the design documents assigned is for information purposes only. It would have been far better with usability to have the display icon in the main data.
BR,
Pipsa -
Legacy number in the material master
Dear SAP Guru,
Good day.
We are currently in production support today and we want to understand how a legacy number differs from a material number. As we can see in the material master (Classification View) there is an indicated legacy number there with a corresponding value. Could you further elaborate on how and what is the usage of a legacy number?
Thanks in advance for your help.
Kind regards,
JMTJasmin,
Basically some clients would be interested to track the SAP material number with referance to the Legacy material number, this data would be uploaded during the Cut-over and data conversion to SAP.
I would suggest you look at the Functional/Tehnical specification document for the conversion program which was used for uploading the material master data into SAP, that would give you the business reason and the field mapping details.
Regards,
Prasobh -
Service Level in the Material Master
Hi -
Can the service level field in the material master MRP view be used to drive additional demand independant of safety stock? Meaning, is there any way I can enter a service level and have it increase demand even if I am not using it to calculate safety stock?
ThanksI do not think this is possible. Service level is usually used for safety stock planning.
-
Activation of the Batch management check in the Material master
Dear All,
Here I have one query
Can we able to activate the Batch management check in the material master-->Purchaging view or not,
if we have open or completed sales documents and deliveries for that materail.
Reply ASAP
Regards,
Murali.Hi Murali ,
you can very well do it . in fact we have done the same with our client.
check below article .
https://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/b009b1e5-f3df-2b10-7289-ff87d139dce1
Regards
Ravi.
Maybe you are looking for
-
Memory upgrade on new macbook pro without Retina display?
Hello, I was wondering if the memory on the new macbook pro's without the retina display be upgraded still or is it soldered on? Thanks,
-
hi, in smartform, in secendary window i want a box .can it is possible to do this.plz tell me procedure.
-
What to do if screen is cracked
I got my ipod touch for Christmas and today the screen cracked. What should I do to get it replaced? What is the safest, most cost-effective way to go about this?
-
Best Mac for working in Photoshop CS5?
I currently have a Macbook pro from 2004, I've recently updated to Lion and cleaned out my computer to have around 145GB free space. It has a 2.4 Ghz Intel Core 2 Duo Processor and 2GB Memory. I work extensively in Photoshop CS5 and have problems wit
-
font issue - in all my replies, sent and forwarders the font is different size and style. Sometimes it changes while I am typing in mid sentence. I tried to adjust using tools, options, advanced. But nothing seems to stick. How can I make all emails