Oilpaint filter the only one that does not have .pbk file

hello,
i just learned about pixel bender and installed it in photo shop. i also copied the "pixel bender files" folder into plugins/effects directory for after effects to try them out there.
i really liked playing with the OILPAINT filter in photoshop, but when i looked for it in AE i realized something weird... there is no .pbk file for OILPAINT like there is for all the other filters. - so, it doesn't seem i can use it in ae...
does anybody know why this is? or how to work around it?
thanks
max

The oilpaint filter is currently proprietary to Adobe which is why there's no PBK file for it. If you'd like to see it in After Effects you can make a request on the AE forums.

Similar Messages

My iphone5 is in the same room with an ipad, 2 kindles and 2 iphone4S and it's the only one that does not have a wifi signal. pls help

why does my iphone5 not have the same wifi coverage as 2 other iphone4s in the same room?

Try restarting your iPhone by holding down the on/off and the home buttons at the same time until you see the Apple Logo. If you are still not able to connect try resetting your network settings. Go into your settings>general>reset then tap reset network settings. If both fail to fix your problem try restarting your router.

HT4519 how do i delete an email account? The one i want to delete is the only account that does not have a "delete" red bar??

I have 6 email accounts on my iPhone 6 and want to delete one that is set up incorrectly. It is the only account that does not have the red DELETE bar...what do i need to do to delete it?
It is hosted by GoDaddy, is this the problem?

Thank you so very much! That was just what I needed to do, problem solved.

Toshiba L755 is the only one that will not PXE BOOT

I have a few host on my network which it has VMWare 10 installed, successively performed deployment into those machines(Hosts and created VM"s). Now, I do have also a Toshiba L755-S5258 that will not complete the process, it does not give any
errors. The following is the messages it gives.
Client MAC ADDR: xx xx xx xx xx xx GUID: XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXX
Client IP:XXX.XXX.X.XX MASK: XXX.XXX.XXX.x DHCP IP: XXX.XXX.X.X
Gateway IP: XXX.XXX.X.X
Downloaded WDSNBP...
Press F12 for network service boot
Windows Deployment services: PXE boot Aborted.
PXE-MOF: Exiting Intel PXE ROM
This si the only unit that does not follow through with the deployment
Note that I've deleted other machines that I successively deployed to from the Known Computers on Active Directory User and Computers, with not good results
Please any one help me decipher this headache

Hi,
Are your using the WDS for the Windows deploy? A network boot program (NBP) is the first file that is downloaded and executed as part of the network boot process and it controls
the beginning of the boot experience (for example, whether or not the user must press F12 to initiate a network boot). NBPs are specific to both the architecture and firmware of the client. You must accounting the screen press F12 to allow the system boot
from the WDS. The VMware® workstation PXE booting issue please ask your software vendor.
The related KB:
Managing Network Boot Programs
http://technet.microsoft.com/en-us/library/cc732351(WS.10).aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Am I the only one who does not like the poor way labels are displayed?

In the finder, applying a label to a file results in some file 'colors' behind the file name being squared or out-of-round on the right side. Surely there is a HIG that says there are to be 'rounded' corners?
It just looks sloppy. I don't like it.
Am I the only one?

If I understand your complaint correctly, what you are talking about is just that the window isn't large enough to show the right side end of the color. Try scrolling the window horizontally until the right edge is in view & I think you will see that both ends are rounded.

Is My Iphone 3gs the only one that does this really weird glitch

ok i have a issue i looked everywhere and i did not see anything in the forums about this
when i am replying to a text message and auto-spell types something so i hit the back button/delete key to rewrite what i want to type and it does not delete the text it just goes over the letters and doesn't delete it and sometimes the cursor will just get stuck and sometimes the cursor when i am deleting text will keep going over the letters i am typing and doesn't do anything , so as i hit back/delete button on keyboard it just keeps going over the letters and does not delete its really weird, and this is my 2nd new iphone 3gs for a different issue, and they both did that.
what i want to know is if this is a hardware problem and should i take it in to get it replaced again which i hate doing,since i got a good iphone 3gs this time...has this happened to anyone else,or does this happen to anyone else
any help would great thank you

Well if it happened to 2 different iphones perhaps something is corrupted in your backup restore file. By restoring your new phone with this old backup restore file u may be copying over the problem.
Solution: Restore and setup your iphone as a 'New' phone instead of restoring from a previous backup. This should solve your problem.

I have accidentally change my "Apple start-page" to one that does not have "search" window. How do I get back to my original Safari start up page?

When I am in safari and go to a site, I now do not have a place to "search". I accidently lost the original page that appears when going to safari. How do I get back to my original "start-page" that I started with?

I think you may mean the search box on the toolbar. In Safari click on the View menu and select Show Toolbar.
Alternatively, if you mean the 'Home Page' then open Safari -> Preferences -> General and next to 'Homepage' put in the address of the page you want - I'm guessing "http://www.google.com/".

How come my phone will no longer hook up to my work wi-fi? it has for almost 2 years and all of a sudden it does not. I am the only one that can not get on.

My phone is no longer hooking up the my Wi-Fi at work. I has for almost a year and now all of a sudden it will not. Everyone can hook up so they did not change anything as far as the Wi-Fi. It hooks up at my Wi-Fi at home fine and other areas, just at work is the problem. What could be causing this? I am using the Motorola Moto Rzr

Could be your work banned your particular MAC address or some such. Maybe they ran an analysis on network usage and type of use and found you to be a large consumer on their network. IDK what type network you are on or business you work at. I know it's been done before to curtail employee efficiency. Otherwise, you may need to speak to the administrator of said network.

Is my iPhone the only one that has this tiny line show up in safari?

When I click the open more pages option on my iPhone this little line ahold up on the bottom left of the screen. Is my iPhone the only one that does this?

I am sorry i was using my iphone to post and can not post an image. Bottom left corner above private.

Delta.edu patially hides behind home page until I CLICK ON it and its the only site that does this other computer does not do this.

Question
delta.edu patially hides behind home page until I CLICK ON it and its the only site that does this, other computer does not do this. i see .25 of ther home page.

Did you disable all the extensions before restarting?
If it works in Firefox Safe-mode then disable all extensions (Tools > Add-ons > Extensions) and then try to find which is causing it by enabling one extension at a time until the problem reappears.
Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
In Firefox Safe mode these changes are effective:
*all extensions are disabled
*the default theme is used (no persona)
*userChrome.css and userContent.css are ignored
*the default toolbar layout is used (localstore-safe.rdf)
*the Javascript JIT compiler is disabled
*hardware acceleration is disabled
*plugins are not affected
*preferences are not affected

I just purchased the apple tv, i have an older tv that does not have an HDMI input. is there a converter i can get because the itv only have an HDMI output ? help.

i just purchased the apple tv, i have an older tv that does not have an HDMI input. is there a converter i can get because the itv only have an HDMI output ? help.

Welcome to the Apple Community.
There are hardware converters that will convert HDMI to various other types of output, however there are some issues with doing so that you should be aware of.
HDCP
HDCP compliant converters will not allow you to watch HDCP protected content such as that from the iTunes Store. Non compliant converters exist but we cannot discuss them under the Terms of Use for these communities.
Resolution and aspect ratio
I'm not aware of any converters that will scale the output from the Apple TV, any TV or projector which is used will need to be widescreen and support resolutions of 720p.

I Have a Macbook Pro that does not have a disk drive. How do I install the Adobe Photoshop Elements 11 that came with the Epson scanner I purchased. I registered the S/N and I can't find the Free download anywhere only trials.

I Have a Macbook Pro that does not have a disk drive. How do I install the Adobe Photoshop Elements 11 that came with the Epson scanner I purchased. I registered the S/N and I can't find the Free download anywhere only trials.

Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

I am at a computer that does not have my music library. I have a CD that I want to add to my iphone. The only music on this compi=uter is the new CD I just bought. Everything I do seems to suggests that my entire iphone library will be replaced

Help

Hi istillFrustrated,
If you try to sync your device to a new computer that does not have your iTunes Library on it, then it will erase everything on your device and sync whatever is in the iTunes Library on the Computer you are syncing with.
You need to transfer your iTunes Library to the new computer, or you need to burn the CD to the iTunes Library on the computer you normally sync with.
Cheers,
GB

Why is 1080i the only one that works for my slideshow.

Well... I'm getting to my breaking point.
First my system.. Mac Pro 2.66 2x300gb raid 0. x1900 ACD 30
5gb Ram
I have read many many posts.. but I still need your help.
I have found that the only thing that gives me a marketable slideshow in terms of quality images is to make a slideshow in imovie under 1080i.
The problem with this is that it really really slows my computer down, and I don't want to do this with a slide show of about 150 images per client, and then have wait more for transistions.
Shouldn't I start a new slideshow in "DV" setting for a 4x3?
I have tried reducing res from 10.2 mp to a 1024x??? settting for images (depending on orientation). All I seem to lose here is a bit of sharpening as I reduce the image resolution, which makes sense if I understand correctly.
So... Where to go from here.
I read the posts.. and have determined that I can use Photo to move (which I have) to make clips and import them into Imovie. Again, a slow process as each clip has to be done seperatly. Is there another way with PTM, because it does render the best Ken burns effect I have seen. Again 150 images is too long to wait to make a slide show of a wedding, not cost effective for me.
Hope someone can help.

Anyone??
When I make a movie in 1080 or 720.. it takes alot of resources and slows things down.
Just wondering why choosing those options are the only ones that seem to work
I really need to get it into 4x3 format too.

Ipad displays "ipad is disabled connect to itunes", I have tried putting the ipad into recovery mode and then restoring but that does not work. I have also tried doing a hard reset of the ipad and that does not work either. Any ideas?

Ipad displays “ipad is disabled connect to itunes”, I have tried putting the ipad into recovery mode and then restoring but that does not work. I have also tried doing a hard reset of the ipad and that does not work either. Any ideas?
My son let one of his friends use his ipad. The next time he tired to use it he could not get it unlocked, I tired to unlock it but it kept telling me that I had the wrong pass code. With out me knowing my son continued to tire until it completely disabled it self.

How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

Oilpaint filter the only one that does not have .pbk file

Similar Messages

Maybe you are looking for