OIM 10g provision takes long and gives DOBJ UPDATE FAILED

Hi.
We Recently added a resource but it´s provisioning process takes about 1 minute to complete.
When a user makes a request for lets say 10 users, when the request is approved, the web page tries to wait until all the 10 user provisioning process is finished but that means 10 minutes waiting and OIM gives DOBJ.UPDATE_FAILED. I assume this is a timeout.
How can I configure OIM (10G) to do all the provisioning process in background so there will not be needed to wait a lot of time watching a stall page when the (last approval step) approve button is pressed ?
Thanks.

It´s a Webservice which makes a LOT of transactions and takes a lot doing them, we cannot change its behavior because it was built by someone else.
Offline Provisioning Explains a lot!
Even fixes a Rollback problem we were having caused by conectivity problems with some target Systems.
Thank YOU!

Similar Messages

Word File Takes Longer and Longer to Save

I’ve been working daily on the same 100-page document for several months. I had no problems with the document under Word 2003. However, under Word 2010 the file grows in size over time, and saving the file takes longer and longer to the point where there
are significant timeouts (Word is “not responding”) whenever an automatic save occurs.
I don't want to diable automatic saves because Word does crash for me on rare occasions, generally if I do something "too fast".
I’ve found a workaround for the problem, and every three weeks or so after the automatic saves have become painfully long I copy the document to the clipboard (except for the last paragraph mark) and then I open a new document based on the relevant template
and I paste the clipboard contents into the new document. I rename the old version of the document and the new version becomes the working version. This reduces the file size (currently around 1.4 MB) by about 150 KB and the problem goes away for another three
weeks.
Certain aspects of my situation are unusual, and these may or may not be relevant to the problem:
At the end of each day I use (via a macro) the Review, Compare feature of Word to compare the document with the previous day’s version to allow me to reread any changes I made to it.
I use various other macros for intelligent page-turning, resizing windows, smart Find, etc.
I maintain the document as a DOC file (Word 97-2003 Compatibility Mode) because I need to share the document with an organization that requires this format.
The document flips back and forth a few times between being a one-column and two-column document.
The document has a table of contents on the last page.
The headings in the document have embedded section and subsection numbers.
The document has numerous embedded SEQ and cross-reference fields.
The document has embedded EMF pictures that were generated by a non-Microsoft application.
The long times to save the file and the temporary solution I’ve found to the problem suggest that some "junk" is accumulating “in” the last paragraph mark. This junk doesn't cause any operational errors, but it slows things down to the point where
the auto-save times out and I temporarily get the distracting "not responding" message. It would be nice if Word could automatically eliminate the junk in the last paragraph mark so that I wouldn’t have to do it manually.
Do you have any suggestions for how I might eliminate the problem?
I'd be pleased to send a copy of the slow-saving file to a Microsoft Word programmer for diagnosis of the problem.
I have up-to-date Windows 7 professional (64 bit) and Word 2010 14.0.6129.5000 (32 bit).
Thanks for your help,
Don Macnaughton

I am experiencing exactly the same save issue, although I cannot use the suggestion of copying to a new document as I have allot of references within the same document and I'm scared that I'll loose them (or mess them up).
It is nearly a year later, did you have any luck?
Francois,
I'm still experiencing the problem. However, I've now converted the document from a DOC to a DOCX, but that made no difference. So every 18 or so days I copy all of the document into a new document except for the last paragraph mark
and the problem goes away for another 18 or so days. For my document this solution is fully reliable although it's less convenient because it's a little complicated and I worry I may make a mistake or some text may be lost in the transition.
So I'm still looking for a solution to the problem. Is there anything unique about your document or your handling of the document that might be the cause of the problem? Are you using macros, Compare Versions, switching back and forth between
one and two columns, or anything else that is common to the features that I list in my first post in this thread?
You might want to try my copying solution as a test while keeping your original document as the official version that you continue to work with. You could then check the test document very carefully to see if my solution works with your
document. You might find that you can trust my solution (or you might not).
By the way, I make sure that the copy worked properly by doing a Compare Versions of the old and new documents. (Surprisingly, sometimes the compare finds very minor differences between the two documents, but usually not.)
If the problem really bothers you, you can hire Microsoft Support, although that will cost you some money. If you do that, please let us know the outcome.
Don Macnaughton

When I use update software from my mobile it take long time for checking update software and no thing happened to update my IOS software

When I use update software from my mobile it take long time for checking update software and no thing happened to update my IOS software

Servers have been swamped. Keep trying and be patient. Wait a few days.

I am trying to download the InDesign CS5.5 update and keep getting "Update Failed" "Please contact your Administrator if you wish to apply updates on your machine". I have done this and now have Administrator rights, but I am still getting the message. Ho

I am trying to download the InDesign CS5.5 update and keep getting "Update Failed" "Please contact your Administrator if you wish to apply updates on your machine". I have done this and now have Administrator rights, but I am still getting the message. How do I apply the update?

Direct Updates
https://www.adobe.com/downloads/updates/

Why does addressbooksync takes long and using really a lot of ram!?

When I sync the iPhone with iTunes and look at my activity monitor, it shows that it takes more and more ram to do this. After 5 minutes while sysncing the addressbook only, the amount of ram used is already 6.70 gb! Here a screenshot:
Why is this? It completely slows down my system.

It's not a memory leak, see the references to learn more about how RAM is utilized to speed up the Mac.
OS X Mavericks: About Activity Monitor - Apple Support
http://www.switchingtomac.com/tutorials/osx/understanding-memory-pressure-in-os- x-mavericks/
http://macs.about.com/od/macoperatingsystems/fl/Understanding-Compressed-Memory- in-OS-X.htm

Blackberry ID under Options and BB Identity update fails

Hey BB People
I've this BB Curve 8520 for almost 2 years now.
Under Options on the device, there an option Blackberry ID, when I want to go in there it shows "Accessing account information" for a while and then shows me "Unable to update your Blackberry ID account information". What is the reason for this?
I also cannot get into my App World, it shows "A BlackBerry Identity update is needed. Would you like to install it now?" If you select "Yes" then it takes forever and nothing happens. It eventually pops up with "BlackBerry Identity installation failed. Please try again later. (80003)"
WHAT TO DO?????

Hi and Welcome to the Community!
Here is a KB that discusses that error:
KB29613 The error "BlackBerry Identity installation failed. Please try again later. (80003)" is displayed within BlackBerry App World
Hopefully it contains something useful! There also are multiple existing threads on this site that discuss that exact error...your review of those might prove useful, and a search of this site, using the error message or code, should reveal all applicable existing threads to you.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

In trying to update itunes to version 10.7 I get messages that older versions of "Bonjour" and "Apple Software update" cannot be removed and so the update fails. Itunes works well on my old ipod nano but not on my new ipod touch? Any ideas

Any ideas as to how I can update an older version of iTunes to at least version 10.7 given the problems I'm having with "bonjour" and the "software update"?

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get aCode 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any Apple Software Updateentries and click "Remove", as per the following screenshot:
Next, select any Bonjour entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install using an iTunesSetup.exe (or iTunes64Setup.exe) downloaded from the Apple Website:
http://www.apple.com/itunes/download/
Does it go through properly this time?

Newest Photoshop CC And Bridge CC Updates Fail

My Creative Cloud app says that I have updates to Photoshop CC and Bridge CC to download, but the updates fail. I get the following error message "Unable to extract the downloaded files. Press retry to download again (U44M1I210)" When I press retry it always fails with the same error message. I tried signing out and back in but it still fails. Each time it fails the progress bar starts at 50% and fails. I am on Windows 7 64 bit and the current version of Photoshop I am running seems to be 14.2.1 and Bridge 6.0.1.6 x64. Thanks for any help!
Howard

Found the solution by looking up error messages on the forum. Have to delete the AAMUpdater file and then retry the doenload and it worked. Hope it helps someone else!

Premiere Pro CC 2014 update and Media Encoder update fail to install

Hi -
I've been updating my CC applications. But PP CC 2014 and media Encoder say: "UPDATE FAILED". Naturally I cannot get through to Abobe. Does anyone have a suggestion?
Harry

Hi Harry,
Sorry, chat and phone support are closed on weekends for the video queue. We only have general support open on weekends. It's been this way for years. Sorry if that caused some inconvenience.
I hope you have solved your issue. If on Mac, you can update NVIDIA drivers in the NVIDIA control panel in System Preferences. AMD GPUs are merely updated when you update OS X.
Also, please check out the doc that was recommended: Installation failed. Error U44M1P7 | Updates
If you are still having trouble, contact us Monday through Friday 7AM-7PM PST here: Contact Customer Care
If you can't get your issue solved, send me a PM and I'll try and help.
BTW, I am not sure why your post is marked as correct. I do have that ability but did not do that. Sorry for that.
Thanks,
Kevin

Recent Media Encoder 2014 and Premiere CS6 Updates Fail

For the past month or so the Media Encoder 2014 and Premiere CS6 updates are failing to install within the App Updater. The error message is U44M1P34.
What's the solution?

Here's an extract:
12/19/14 07:11:50:073 | [FATAL] | | OOBE | DE | | | | 33680 | Payload 'Adobe Media Encoder CC 2014_8.0.1_AdobeMediaEncoder8AllTrial 8.0.0.22 {843B3BFA-BA88-4788-856E-1289F0846449}' information not found in Media_db.
12/19/14 07:11:50:074 | [INFO] | | OOBE | DE | | | | 33680 | :: END TIMER :: [Total Timer] took 750.765 milliseconds (0.750765 seconds) DTR = 255.739 KBPS (0.249745 MBPS)
12/19/14 07:11:51:075 | [INFO] | | OOBE | DE | | | | 33680 | -------------------------------------- Summary --------------------------------------
12/19/14 07:11:51:075 | [INFO] | | OOBE | DE | | | | 33680 | - 1 fatal error(s), 0 error(s)
12/19/14 07:11:51:075 | [INFO] | | OOBE | DE | | | | 33680 | Win OS version: 6.2.0.0 64 bit Type: 1
12/19/14 07:11:51:075 | [INFO] | | OOBE | DE | | | | 33680 |
12/19/14 07:11:51:075 | [INFO] | | OOBE | DE | | | | 33680 | FATAL: Payload 'Adobe Media Encoder CC 2014_8.0.1_AdobeMediaEncoder8AllTrial 8.0.0.22 {843B3BFA-BA88-4788-856E-1289F0846449}' information not found in Media_db.
12/19/14 07:11:51:075 | [INFO] | | OOBE | DE | | | | 33680 |
12/19/14 07:11:51:075 | [INFO] | | OOBE | DE | | | | 33680 | Please search the above error string(s) to find when the error occurred.
12/19/14 07:11:51:075 | [INFO] | | OOBE | DE | | | | 33680 | These errors resulted in installer Exit Code mentioned below.
I'd attach the file but don't see how to do that in a reply.
- Mark

HT1338 Number, Keynote and Pages app updates fail. Says try from Purchases. Same result - fails to download, Why??

Got update notice for Pages, Numbers and Keynote on my macbook. When I try to install updates ... "failed" message appears.
Have tried several times.
Why?

I have just purchased Keynote 6.2 from the app store and the download keeps failing. I have an iMac running Mav's 10.9.2 Any advice with what could be down to get to my purchase would be great. Thanks very much.

CS-5 and CS-6 Updates failed twice

After deactivating CS-5 & CS-6 from my old PC, I installed them on my new PC. I checked for updates and there were several. I tried installing them twice and both times they failed. The first time I tried installing them all, and the second time I tired to install about half of them. The Log File said there was an error downloading this update, please try again later. Do you have any suggestions? Thank you

Hi Larry,
Welcome to the Community!
Please confirm if you have Adobe application manager or Creative cloud app, re-download whichever you have via:
Adobe application manager: http://www.adobe.com/support/downloads/detail.jsp?ftpID=4773
Creative cloud App: https://creative.adobe.com/products/creative-cloud
Launch and try to update, if that doesn't resolve the problem then rename OOBE folder to OOBE.old
Windows: [System drive]:\Users\[username]\AppData\Local\Adobe\OOBE
C:\Program Files (x86)\Common Files\Adobe\OOBE
Restart the machine and check.
Thanks!
Ankit

When starting firefox, it takes a long and gives me an error message

When starting firefox, I wait a long time and then get the following message:
A script on this page may be busy, or it may have stopped responding. You can stop the script now, or you can continue to see if the script will complete.
Script: chrome://tavgp/content/libs/include.js:595
If I press "stop script" several times, the web page will finally load. This does not happen with IE, but I hate IE.

See http://support.mozilla.com/en-US/questions/761982

OIM 10g - Provisioning issues

Hi Gurus,
I have the following situation in the OIM:
I have 2 resources (A and B). B is configured to Allow Multiple and depends that A is provisioned.
The resource A is already provisioned. So, when I need to provision B, is being showed to user fill out the resource forms of the B as well as of the resource A, and the workflow's process of A is triggered again.
This is causing a bad user experience.
Any tip in this behavior.
TIA,
Carlos

Kevin,
The resource form is necessary because I have a lot target attributes I do not have in the user definition.
But the my principal concern is, should the resource form of the resource A (already provisioned) be showed to the user for filling out? The request was did only for the resource B. Is this behavior correct?
Detail: When the resource A is not in Depends On tab, the A's resource form is not showed during request.

Facebook won't load properly. Takes forever and then I get a script page with log-in and then that takes forever and gives me further script that won't let me access anything. Other sites load and work OK!

Started after last auto update several days ago. A few other sites are slow to load while many are good but Facebook just won't present it's usual mix of pre-programmed scripts and links but comes up eventually as part HTML script with a log-in box and when you log-in it then takes forever again and just gives HTML type script for "Friends" "messages" etc. but if you click these it goes nowhere!
Also it won't let me clear history at all despite many tries. I removed and reloaded the program last night but no positive effect.

I still haven't resolved this problem. Here is some more information...
youtube is the only website that has started working, but it sometimes stops working again.
There are many other sites that don't work, cnn.com, washingtonpost.com (sometimes), and a lot of others.
I have contacted our internet service provider and they said that they had nothing to do with the problem.
Some websites will not work at all. Safari tells me that it can't find the server. Some that do this are ups.com, computerworld.com, and others.
I think that the problem is that, for some reason, our mac computers can't access certain servers where we are. (We are at a small ski resort (on the mountain) in Canada.) I think this because when a site doesn't load properly there are several errors and they are all "can't find host" errors from a couple of the same sites (ex. example.something.something).
*Also, I ran a test on speedtest.net on the laptop and one of our iMacs and the results were way faster than anything actually loads/downloads or than the activity monitor shows, even when checking the activity monitor at the same time as running the test.

OIM 10g provision takes long and gives DOBJ UPDATE FAILED

Similar Messages

Maybe you are looking for