OIM 9.1.0.1 Installation stuck at "Finalizing virtual Product Data Registry

Oracle Database is installed on server and I will be connecting to that one while installing OIM
I installed WebLogic Server 10.3.3 on my machine,started Admin Server
Then I tried to install OIM 9.1.0.1.
But Installation is not getting complete.
Its stuck at this point.
Finalizing Virtual Product Data Registry
This Operation may take a few moments.Please wait.........
and below that there is a progress bar which is showing 100%
One more thing I would like to tell you that When I specify the location of jdk(i.e C:\Oracle\Middleware\jdk160_18), it gave me error
"The Selected JDK Version is not supported by Oracle Identity Manager"
Oracle isentity Manager may not function correctly if you continue installation with this unsupported version of JDK.
Do you want to poceed with this unsupported version.?
So I installed JDK 1.5 on my machine ,gave path of JDK1.5,It also gave the same error
Then tried with JDK 1.6,then SDK EE 1.6......but all gave the same errors.
So I finally I use the one came with WebLogic server i.e C:\Oracle\Middleware\jdk160_18
and on prompting of following error
"The Selected JDK Version is not supported by Oracle Identity Manager"
Oracle isentity Manager may not function correctly if you continue installation with this unsupported version o JDK.
Do you want to poceed with this unsupported version.?
I chosen Yes

What does the setup_weblogic.log says?
-Bikash

Similar Messages

Windows 8.1 installation stucked at 'Finalizing your settings' stage!

I have G580 model. yesterday I was trying to install windows 8.1 but the installation stucked at "Finalizing your system" stage for about 18 hours! I tried several times to go to the BIOS for reinstall 8.1 or fresh installation of windows 7. but I cant enter into the BIOS by pressing F2/F8/F10/DEL whatever after restarting my system immidiately! what should I do! please help me to install my previous windows 7 OS.
Solved!
Go to Solution.

If you performed a clean install, try again and see if it works out. The same thing which you faced happened to me while I was upgrading from windows 8 to 8.1, it took me a couple of tries before 8.1 would finally install.
Cheers and regards,
• » νιנαｿѕαяα∂нι ѕαмανє∂αм ™ « •
●๋•کáŕádhí'ک díáŕý ツ
I am a volunteer here. I don't work for Lenovo

OVM Manager 3.1.1 Installation stuck at final step

Hello,
My OVM Manager 3.1.1 installation is stuck at 'Please wait while Weblogic configures the applications... This can take up to 5 minutes.
Trying...
Trying...
Trying...
and continues this message.
Prior to this step it does say Oracle VM Manager is running...
Oracle VM Manager installed.
Ideas?

To add:
found this post
Anyone seen this behavior installing OVM Manager 3.0.2?
Tried what was on there
However what I'm getting now when I enter the username passwords is
Connecting to Weblogic Server...
There is no server running at t3://localhost:7001
Connection to WebLogic server failed...

Why is the installer stuck on "Checking System Profile-"?

I'm trying to install Flash Catalyst Beta on a MacBook Pro running OS 10.6.1 (Snow Leopard).
The installer starts to work, but then it stops at the point where it checks the system profile (see attached screenshot). It doesn't seem to have crashed as the dock icon allows me to quit without force quitting the application.
I've tried it in my regular user account and the administrator account, but the behaviour is identical.
Any help would be appreciated.

I appreciate all your efforts, but I¹ve just received my new copy of CS5, so
I¹ll be installing the final version.
G
From: ritesh kapoor <[email protected]>
Reply-To: <[email protected]>
Date: Thu, 29 Apr 2010 04:32:06 -0600
To: Gary Horsman <[email protected]>
Subject: Why is the installer stuck on "Checking System
Profile…"?
Thanks Gary.
I need to ask you a few questions and request you to perform some more steps
so that I can debug your problem.
1. Have you modified any folder permissions, authorization setup using
Keychain Access utility (or any other tool)?
2. Open a Terminal window, and run the command 'ls -l /tmp' and copy-paste
the output printed on your screen in your reply.
3. Delete all files whose name start with 'asu' in your /tmp folder. Run the
command 'rm -rf /tmp/asu*'. Restart your machine.
4. Launch the Flash Catalyst setup and check if installation proceeds
successfully. If it doesn't, proceed to the step below.
5. Open the folder containing the Flash Catalyst setup. Browse to the
'packages' folder and rename the file 'install.sig' to 'update.sig'. Double
click and launch the Flash Catalyst setup. This will not install the
application but install the Adobe Application Manager. Let me know if you
see a small dialog with a progress bar. Rename back update.sig to
install.sig. Update us your observations. Continue to next step.
6. Launch 'Disk Utility' app (from /Applications/Utilities). Select your OS
partition in the left panel and click on 'First Aid' tab on the top. Click
on the 'Repair Disk Permissions' button at the bottom.
7. Again, launch the Flash Catalyst setup and check if installation proceeds
successfully. If it doesn't, proceed to the step below.
8. Open a Terminal window and navigate to the directory containing the Flash
Catalyst setup. Run the command 'sudo Install.app/Contents/MacOS/Install'
and enter the password. Let me know if the installer launches and on
following the screen instructions do you still see the error screen or does
the installation proceed successfully.

OBIEE 11g installation stuck at step 12 of 14 (0% copying files...)

Hi All,
I am installing OBIEE 11g on Windows7 32Bit OS.
I have done with all the steps till step 11 without any error. However, ASA it starts the step 12 (i.e. Configuring WebLogic- Copying files...), installation stuck at 0% and do not continue. I waited for 8-10 Hrs but it never started copying files.
Also, I tried the installation numerous times, but every time I got the same problem.
I verified the logs as well, but there was no error.
Please help me to resolve the issue.
Regards,
Ashish

Yes, I got an idea, install OBIEE in a supported platform as your it's not supported at the moment:
http://www.oracle.com/technetwork/middleware/bi-enterprise-edition/bi-11gr1certmatrix-166168.xls

Solman installation stuck with error - SLES 10 , Oracle 10.2.0.4

Hi,
Solman 7.0 installation with ehp1 installation stuck with error - SLES 10 , Oracle 10.2.0.4
the error is at the step install DBA tools -> error is 'select status from v$instance did not match /^\s(\S+)\s$S/gNaNOPEN MIGRATE'.)
Just FYI : we had issue while installing Oracle , we have followed work arround 3 in the SAP Note 980426
Kindly help to proceed further
Thanks & regards,
Prabhakar Reddy.Y.C.

sapinst.log
CJS-00084 SQL statement or script failed. DIAGNOSIS: Error message: ORA-01092: ORACLE instance terminated. Disconnection forced
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, Data Mining and Real Application Testing options
. SOLUTION: For more information, see ora_sql_results.log and the Oracle documentation.
ERROR 2010-11-21 06:55:22.502
MUT-03025 Caught ESAPinstException in Modulecall: ORA-01092: ORACLE instance terminated. Disconnection forced
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, Data Mining and Real Application Testing options
ERROR 2010-11-21 06:55:22.533
FCO-00011 The step runSapdbaroleSql with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|
NW_CreateDB|ind|ind|ind|ind|0|0|NW_OraDBCheck|ind|ind|ind|ind|0|0|NW_OraDBMain|ind|ind|ind|ind|0|0|NW_OraDBStd|ind|ind|ind|ind|3|0|NW_OraDbaTools|ind|ind|ind|ind|11|0|
runSapdbaroleSql was executed with status ERROR ( Last error reported by the step :Caught ESAPinstException in Modulecall: ORA-01092: ORACLE instance terminated. Disconnection forced
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, Data Mining and Real Application Testing options
Edited by: prabhakaryc on Nov 21, 2010 7:01 AM

Bootcamp Drivers Installer stuck at installing iSight

I don't know why the installer stucked at installing iSight. Also, I tried to manually install Apple drivers but it also stucked at 'Copying files'. What happened?
This Windows was converted from Parallels Virtual Hard Disk and cloned to Bootcamp disk.
Will this affect the installation process?
Cuz' I don't get any Windows disc.

I'm sorry, I mean ' Searching drivers for device' or something

Oracle 11g R2 Grid Infrastructure Installation stuck on 65%

Dear All,
I am in process of installing Oracle 11g R2 Grid Infrastructure on 2-node virtual RAC. All went very well until the Grid Installation stuck on 65%. It is saying copying file on remote node ('Copying Oracle Home '/u01/app/11.2.0/grid' to remote nodes 'cxm-vl-rman02'). From the logs it is difficult to figure out where the bottlenecks lies. Have anyone of you encounter similar situation before? I can attach oraInventory logs as well if you want to have a look at that. Please let me know if you find any pointer or clue of this problem.
Many Thanks
Nukesh

No nothing was being copied, the /u01/app/11.2.0/grid directory was empty and nothing was adding to the log or err files.
Actually I found/resolved the problem and forgot about this post.
It happens that in staging my server, iptables was enabled which stopped the progress.
I had to issue 'service iptables stop' and 'chkconfig iptables off' AND REBOOT ALL NODES.
Simply stopping the service allowed the installer to continue, but eventually the root.sh script has problems. Rebooting both nodes resolved the issue.
Thanks

Installer stuck....please help =[

I just got the 5300 xpress music phone and i decided to come here and install the nokia PC suite.
I have windows vista, but if you need anymore information just ask.
I get to the installer, and it goes smoothly until the "installing connectivity cable driver" at 61% and it won't go anymore =[

Hi,
How long did you wait when "installer stuck" happen?
Anyway, see this:
/discussions/board/message?board.id=pcsuite&message.id=16560

I'm trying to upgrade to itunes 10.x on Windows 7 Pro. The installation stuck at the stage "Registering iTunes automation server". I removed the Antivirus software and re-install iTunes again. But still get same problem. Any solution?

I was trying to upgrade to itunes 10.x on Windows 7 Pro. The installation stuck at the stage "Registering iTunes automation server". I removed the Antivirus software and re-install iTunes again. But still get same problem. Any solution?
JA

Peter Hah
After spending another two days on pinning down the iTunes 10.5 blank store page problem, here's the solution to be found: https://discussions.apple.com/thread/3372617?start=0&tstart=0
Look out for "japiohelp".
In short:
a) press Windows key + "R", enter "cmd", and press Ctrl+Shift+Enter (= runs as admin)
b) enter "netsh winsock reset" and pres enter
c) reboot the computer
and Bob's your uncle.
P.

Enabling Installation of CS3 and CS4 products that will not install on Windows 7 64Bit.

Adobe installers are not known for their helpful or forgiving ways & I have more than once had to reinstall Windows when installation of CS3 and CS4 products has failed with patently inscrutable errors.
The background to the current issue that I was attempting to install PS CS4 on a W7 system which already had CS CS3 installed. The CS4 installer threw up inscrutable messages indicating that the installation could not proceed and to contact Adobe (they are joking right ? Their phone & web support is notoriously UN-helpful).
After reading through threads suggesting that I uninstall CS3, apply CS3 and CS4 cleaning scripts I was in exactly same position I have found myself in on least 2 occasions with WinXP. By this time I couldn't event get CS CS3 to reinstall!
Then I decided to review the event log and found a number of installer events thrown up by the Adobe installers resembling "Error 1402. Could not open key: UNKNOWN\Components\xxxxxxxx".
I tracked down this very helpful solution which allowed me to change the registry permissions on the parent key HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Installer\UserData\S-1-5-18\ Components and propagate the new permissions down to the child keys.
http://www.okino.com/conv/changing_windows_registry_permissions.htm.
My advice is to follow instructions for "A More All-Encompassing Solution" and propagate the permissions right down to all the child keys as I could see a number of separate adobe installer errors in the event log. Also note the instruction to change the Owner from 'System' to 'Administrators' in Advanced settings. This is necessary in order for the Permissions change to be accepted and replace all the child object permissions.
As with most registry changes good advice to backup your registry hive first (although I didn't; by this time I was already expecting to have to reinstall Windows) and restart your system after making the registry changes before attempting to install / reinstall CS3 or CS4 products.
Hope this solution works as well for others as it did for me as the Adobe support on this issue has been next to useless.
[P.S. Q: Did you hear the joke about the guy who worked on product installation at Adobe rocking up at job interview with 'Adobe Installation Project Team' on his Resume? A: That that is the joke! If you wanted another job in installation development you would hardly admit to experience at Adobe ;)]

John Joslin wrote:
We don’t want people messing with the registry when they don’t need.
My apologies John I didn't realize that I was addressing the official custodian of Photoshop.
Incidentally my advice is intended for others in a similar situation who find themselves stalled during installation and otherwise contemplating a re-installation of Windows. I believe this would be obvious to most forum participants who had actually read my original post.

Messages stuck in Queue in production Enviorment

HI ALL,
My messages is been stuck in queue in production envoirment. I have checked in SMQ2 Inbound queue .there in status it is showing SYSFAIL.When i am dbclick on stauts it is showing XI error due JCO communication failure.Mapping Queue..
I am trying to restart thoose messages but are not getting started . what I need to do. Shall I deleted those queues in in SMQ2 or unlock and then restart them.
Note : this is Production Enviorment ...........is right to delete the queue there while they are showing SYSFAIL status.
Please suggest.
Regards

Hi gangadhar kh
just few checks
1) inside the queue check if any message got stuck due to some error . if QOS for that message is EOIO then it will not allow other messages to process until this is not processed
process that and rest message will get processed
2) ask you basis team to update java kernel so that on production system this queue stuck problem should not happen frequently
3) to restart java stack
run tcode SMICM go to menu bar click on AS Java menu ->send soft shut down->with restart
after some time java services will up
then manually reastrat aal the message
Regards
sandeep

I have upgraded my OX from mountain lion to mavericks . the installer is asking for previous product key. How to know about previous key as the trial version is installed and I have paid for upgrade cost?

I have upgraded my OX from mountain lion to mavericks . the installer is asking for previous product key. How to know about previous key as the trial version is installed and I have paid for upgrade cost? I dont have the previous product key.

virenkhare wrote:
I have upgraded my OX from mountain lion to mavericks . the installer is asking for previous product key. How to know about previous key as the trial version is installed and I have paid for upgrade cost? I dont have the previous product key.
There are no keys, there is no trial version of OSX (ML or Mavericks) and Mavericks is free
What have you downloaded, and where did you get it

Attempting to install Adobe Acrobat 7 installer isn't recognizing my product serial number as a valid serial number. I tried entering it with and without the dashes and neither methods work. What should I do now?

I bought a new computer and I'm attempting to install my older Adobe products that I still use, Adobe Acrobat 7 is the issue for now. I followed the instructions on the Adobe site for installing the older apps, but the installer isn't recognizing my product serial number as a valid serial number. I tried entering it with and without the dashes and neither methods work. What should I do now?

You cannot use your original files and serial number. See the following for the files you need and the associated serial number(s)....
Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3 -
http://helpx.adobe.com/x-productkb/policy-pricing/creative-suite-2-activation-end-life.htm l

Lightroom 5 stuck in "Preparing new searchable data"

Freshly-installed Lightroom 5 stuck in "Preparing new searchable data" for hours.
Sure, I have tens of thousands of pictures, but why it takes so long and shows no progress?
It tried cancelling and starting over with no avail.

I had exactly the same thing happen while I was upgrading several of my old catalogs (LR3 and LR4). After several attempts over several days, I thought to check the forums and stumbled onto this thread. JorritJong's suggestion was most helpful (Thank you!) and allowed me to get around the problem. I had been waiting 5+ hours for one my larger catalogs to be upgraded and watching no CPU, Disk or Memory activity for the Lightroom.exe process, I got frustrated and pressed Cancel. But that hung as well. So I killed the process.
When you think about it, JorritJong's suggestion should only improve matters if there is some sort of deadlock or resource contention in the process (ie. a bug in the software). So I took it a step further and limited Lightroom.exe to 1 core (instead of his suggestion of 2). Steps: TaskMgr->Right click Lightroom.exe->Set Affinity, then uncheck "All Processors" and make sure only one is checked. Then I tried opening the very same catalog for upgrade. It was magically done in about 30 mins! Amazing!
Lightroom Devs, please fix this! Surely for every technically inclined user checking these forums and following this workaround, there must be numerous less technically proficient users who are just stuck and frustrated!

OIM 9.1.0.1 Installation stuck at "Finalizing virtual Product Data Registry

Similar Messages

Maybe you are looking for