OIM 9.1.0.2: Remove user assigned to a task in Provisioning Process

I have read Note: Ability to Have Multiple Approvers Per Resource Object in OIM [ID 429999.1], and executed each steps described in it. But when grant these resource object to some user. First the request was not sended directly to a approval process, as had been expected that I would. The request was send to a provisioning process, specifically to user has been assigned a task, when the user approves the request until the request is then sent to approval process.
I need to send directly to a approval process, because that's where I have defined my levels of approval.
I'm using oim 9.1.0.2 BP18 running on OC4J 10.1.3.5 on AIX 6.1 64-bit clustered install with two nodes, Oracle Database 10.2.0.4 on AIX 6.1 64-bit on RAC.

Hello Everyone,
Thanks for your response. Actually i have a Approval Process, where i have defined my levels of approvals. In Resume I have this Env. :
1.- A Resource: ResourceA
2.- A Provisioning Process in relation with ResourceA.
3.- A Approval Process in relation with ResourceA.
The request was send to a provisioning process, specifically to user has been assigned a task, when the user approves the request until the request is then sent to approval process.
I need to send directly to a approval process, because that's where I have defined my levels of approval. In other words i need to bypass the user assigned a task in provisioning process.

Similar Messages

Delete User assigned to a task

Hi experts,
I would like to delete a user assigned to a task using the Administration area in guided procedures tab of the portal.
So I go to : Guided procedures TAB --> Administration --> Maintain Processes --> Running process list --> Change Authorization --> New User Assignments
But unlike this document:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/173dceea-0c01-0010-0698-819d627fed79
on page 7,
the "Remove User" button is not present.
Can someone explain why?
Is this an error of the document or is it possible to remove a user assigned to a task?
Thanks,
Luca

Thank you very much for your answer Sudhir.
Now I know why the button is not present in my portal.
Luca

GP API - remove user dynamically for a task..

I am having dynamic looping for an action, users assigned in every level.
I am able to add user dynamically for an action using:
rtm1.addRuntimeDefinedUserToRole(prInstance1, Next_Action, userJames, userContext1);
Change user does not work as it will work only for running actions or tasks, for pending one it will not
rtm.changeTaskProcessor(processInstanceID, activityInstanceID, currentProcessor, newProcessor);
remove user is not working for me? suggest me how to use this code?
IGPProcessRoleInstance processRoleInstance=executionContext.getProcessRoleInstance();
processRoleInstance.removeUser(UMFactory.getUserFactory().getUserByLogonID(UserId));

Hi
I tried using the following for my process where the action is yet to happen
I am calling the BG CO before my action. I need to remove the previous user.
rtm1.removeTaskProcessor(prInstance1.getID(),activityInstanceID, userContext1);
rtm.changeTaskProcessor(processInstanceID, activityInstanceID, currentProcessor, newProcessor);
processRoleInstance.removeUser(UMFactory.getUserFactory().getUserByLogonID(UserId));
but nothing is working.
any idea when we can use them? I think changeTaskProcessor will not work for pending tasks.
I am able to get the activityInstanceID from NWA -> GP Processes, but my GP Process is having dynamic loop where the task will generate depending on levels. How can we get the activityInstanceID of the next task/action?

CProjects - Multiple Users Assignment to single task

Hi All,
Can we assign multiple users to a single task, by making them in a User Group.
regards,
rajesh.

Hi rajesh,
Sure, I hope, you are talk about cProject 4.0.
You can create a role, which have different business partner (users) assigned . you can assign then such business partner (one or multiple) to the task.
But you can only have a business parnter as responsible.
Using User-Group is used only for the authorisation aspect.
Kind regards,
Zhenbo

Project Server 2013 - Remove user from resource pool via sync

Hello everyone,
has anyone managed to configure their Project Server 2013 box with a resource pool sync that will actually remove user from the resource pool (disable "User can be assigned as resource" or deactivate users) when the user is removed from the AD
group(s)?
Setup: Single box, SQL 2012 SP1, SharePoint/Project Server 2013 + PU March + CU April. 2 PWA instances, 1 in SharePoint and 1 in Project permission mode. Tried on 2 different machines (different setup, accounts, domains).
Proceedings:
Create AD user U, AD group G. Add U to G.
Go to PWA, setup resource pool sync with G, sync.
U is now in the resource pool, has no PWA permissions.
Remove U from G. Resync resoure pool.
U is still in resource pool, still a resource, still active, can still be assigned as resource.
Adding U back to G an repeating the whole spiel with a resource pool and a PWA group sync of G will result in U being added and removed from the user list (as expected), and U being added but not removed from the resource pool.
Having read
http://technet.microsoft.com/en-us/library/gg982985.aspx and
http://technet.microsoft.com/en-us/library/gg750243.aspx, there does not seem to be an omission on my part.
The first article states:
Note:
The corresponding Project Server User Account is not deactivated based on this synchronization. If the same Active Directory user is configured to synchronize with a Project Server security group, the Project Server user account will be inactivated when
that synchronization occurs. For more information, see
Best practices to configure Active Directory groups for Enterprise Resource Pool synchronization in Project Server 2013.
Unfortunately, this deactivation either does not seem to occur even with a PWA group sync or I misunderstood the article.
So, did anyone manage to setup their resource pool sync in a way, that new resource will be added, but also be removed from the resource pool?
Kind regards,
Adrian

Hi Adrian,
you tried to sync the same AD group that you used for the resource pool sync also with a Project Server permission group?
And on removal of the user of the AD group the project user/resource is not deactivated? Only removed from the group
Regards
Christoph
Hi Christoph,
even though I might have tried that before, I tried it again in several constellations. It didn't change anything. The the user will be properly added to and removed from the PWA group whenever I remove them from the AD group, the use will also stay active
(but cannot logon without permissions). However, the user will always remain in the resource pool, i.e. the "User can be assigned as resource." checkbox will remain unless it is cleared manually.
Having re-read the technet articles, none of the scenarios actually seem to descibe or address the process that I require, or maybe I'm just misunderstanding. Let me just try to outline the core issue:
Add user to AD group. Sync AD group with resource pool. User is now a PWA resource and PWA user.
Remove user from AD group, but do not deactivate/delete user from AD.
(Magic happens!)
User cannot be assigned as ressource in PWA.
So, is there anything to make this step 3 happen, or is it just not possible to sync users out of the resource pool anymore unless they are deleted/deactivated in AD?
Kind regards,
Adrian

User assignment to purchasing organisation and purchasing groups

Dear Experts,
My issue is related to user assignment to purchasing organisation and purchasing groups.
According to the project requirement, we are using central purchasing organisation and we should create the purchasing organisations and purchasing groups locally. it is not reflected from the back end systems through RFC.
Also we have one more team working with indirect materials and they also use SRM. They have already created the organisation model. Two projects are inter-related and belongs to same department in the company, but main different is one uses direct and the other in-direct materials.
Now we should create our purchasing organisation and purchasing groups and assign the users to it.
If we create it separately means not uder the main root and assign the users, we are able to create shopping cart till the contract. But when i create the new purchasing organisation and purchasing groups under the main root which is created for other project which deals with in-direct materails, i am not able to create shopping cart with the user. I am getting the error
' Process scheme could not be found
Please let me know how to deal with this scenario. here i need to add the purchasing organisation and purchasing groups under main root because of the reason that in the other project, purchasing organisation and purchasing groups defined needs to be accessed by our users as well. I mean the users should be able to access all the purchasing organisation and purchasing groups created under root node which gets the purchasing organisation and purchasing groups from the back end systems and the purchasing organisation and purchasing groups we created manually since we cant get it from back end system since it is central purchasing organisation.
Please asvise
Best regards,
Srinath
Edited by: srinath_Vijaya on May 27, 2010 4:21 PM

Hello Masa,
Thanks very much for your time and solution.
Actually the problem was something else and was fixed.
The reason for getting error 'Process schema was not yet defined' is because of missing definition of process schedma for the workflow since the process based workflow setting has been activated.
So this has been resolved by copying the sap standard customizing BC set for SRM workflow using transaction SAPR20 and then process schema for workflow got configured or copied automatically from SAP BC set and the error was removed.
Also the reason for error with user was that no purchaser assignment was done to the purchasing organisation and now it has been done and the users can access the SRM and create shopping cart and the contract.
Regards,
Srinath

CSSImport Utility - Remove Users from Groups

We have a security group that has a few hundred users assigned to the group. When there is a need to remove a user from the group it is difficult to find the user as I have comb through the list to find the user i am trying to remove. Two questions: is there a way to sort the users in the group in Share Services? The second question is can users be removed using the CSSImport utility by specifying the "delete" option in the importexport.properties? Does the "delete" option remove the user from the secuity group and or does it delete it completely from ShareServices? (we are using Hyperion v9.3.0.1.0 Build 5)

Hi,
I am not so sure about the sorting but removing users from groups can be done with the CSSImportExport utility, I see you are on 9.3.0, try and get hold of the 9.3.1 version as it is backward compatible to the 9.3.0 version and more stable.
When removing users from groups, just set your import operation to update
import.operation=update
and in your import csv just put the group children elements and the users you want in the group.
#group_children
id,group_id,group_provider,user_id,user_provider
TestGroup,,,UserToKeepInGroup,Native Directory
This way it will keep the users in the import file and remove the users from the group that are not in the file, also it does not remove the user from shared services only from the group.
Ok?
Cheers
John
http://john-goodwin.blogspot.com/

OIA webservice for removing user role

Hi,
I need information regarding web services exposed in OIA for removing roles etc. We need it in our environment wherein we may not be having priviledge to make database query directly for removing user roles.
(the use case is as follows:
when user id disabled in OIM, assosciated database resource (DBAT, OIA database is used;rbx_users) is disabled ,and user's role is to be removed)
how this can be achieved via web-service call.
any pointers will be helpful
regards,
chhavi

Hi Pallavi,
i have the same problem, can you provide me more specific details?
-exactly oimjdbc.properties location please?
-which is what I have to modify?
Thanks in advance!

How can I remove users assignments on role import?

Hello,
I am importing a role that aleady exists in the portal in order to change some of it's assignments. Overwrite is also checked.
The problem is that if I want to add something to the existing role it is updating but if I want to remove something it is not. For example, I am overwriting a role which has users assigned to it and I would like to remove these assignments at the new import.
I tried importing it without user= like this:
[role]
rid= myRID
rdesc= myDesc
group= myGroups
And also with user= only, like this:
[role]
rid= myRID
user=
rdesc= myDesc
group= myGroups
Yet the users are still assigned to the role.
Of course I can manually remove the users from the role using the Identity management options but the thing is that I have more than 100 roles that I need to remove the assignments from them and I don't want to do it manually.

Hi Roy,
you are partly right. In case of content mirroring the new role would be a delta link to the old role. I assume that when you delete the old role the connection to the original objects will be broken. There is a nice comparison of copy/paste and content mirroring in the <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/ed/fd25c7c14c4094a9fbb19851d79dd1/frameset.htm">SAP Library</a>.
However, keep in mind that you could always re-create the role manually.
Alternatively you could have a look into the How To Guide regarding the<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/93/28f999daa6434a845da6bf9ab5072c/frameset.htm">XML Content and Actions</a> upload. It sounds promising.
You will find the How To Guide located at service.sap.com/nw-howtoguides => Portal, KM and Collaboration => Portal.
Best regards,
Martin

Unable to add/remove users in Mountain Lion Server (Options are greyed out)

For some reason, im unable to add/remove users in Mountain Lion server. The + and - are greyed out. It seems like something is wrong with the permissons because it looks like it cant write the the Ldav3 file (although that may be speculation). Does anyone have any advice for me? I URGENTLY need to add users.
Maybe theres a way to restore default permssions for the boot drive (if that in fact is the issue). Hopefully there is a way that I can fix this while leaving all users, groups, their permissions and shares intact.

Anything interesting and relevent in the server logs?
Anything interesting in the server alerts?
Since it's far and away the most common cause of problems with OS X Server and with distributed authentication (Open Directory is entirely based on network encryption and digital certificates and on responses from your local DNS server(s)), verify your local DNS configuration is working and requires no changes with the following Terminal.app (Applications > Utilities) harmless, diagnostic command:
sudo changeip -checkhostname
sudo requires an administrative password. You might get a one-time warning about the sudo, and that can safely be ignored. The command will display some details, and indicate whether the local configuration appears valid and no changes are required, or further diagnostics for (most) common errors that can arise.

Can we give UNIQUE ACCESS FOR THE SPECIFIC FILE IN THE LIBRARY in SP2013? How can we remove users from SHARED WITH link where files are shared with users?

Hi,
Any help on this?
Thanks
srabon

Hi srabon,
For giving unique access for a specific file in a library, you can go to the library, and select the file , and click FILES->Shared With->ADVANCED, under PERMISSION ribbon, click ‘Stop Inheriting Permissions’, then the file will have unique permissions.
For removing the shared users for a file, firstly, like the above steps, select the file , and click FILES->Shared With->ADVANCED , make sure the file has unique access, then select the users that you want to remove, and click Remove User Persmissions
under PERMISSIONS ribbon.
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

Hide Top level navigation if user assigned only one role

Hi,
I would like to hide the top level navigation if user assigned with only one role.
I can create role based rule to show desktop using Master rule collection, but is it possible by doing to with role count.
If user has multiple roles show desktop1 else show desktop2

not sure if this possible ,you may check feasibility of creating a application which checks user role count and if role count is = 1 load the Portal url (URL alais) which had TLN iview invisible in the same window else do nothing and load the portal with the desktop which has tln.
Put the application in framewrk page which has TLN visible.
create a URL alias and create a desktop -framework page which dont have TLN ,assign this desktop to this URL alias in rule collection set its priority before user conditions check in rule collection so that it has high priority before user or group check in rule collection.
you can create a poc in sandbox and check if it wiorks?

OIM 9.1.0.1 :- Create User Operation with Approval.

Guru/Experts,
I am currently using OIM 9.1.0.1 , and i want create user functionality to be work with approval. Whenvr a user Or xelsysadm tries to create user then its should ask for approve/Rejact then only it will create or reject the operation.
Thanks,
Hemant.

user8995781,
Thanks for your reply , but i am not able to create a user. I am getting illegalArgumentException. My Approval process is triggering properly but i am not able to see provision process triggering properly.
Please find below log :-
13:24:07,457 INFO [PropertyMessageResources] Initializing, config='org.apache.struts.taglib.html.LocalStrings', returnNull=true
13:24:07,478 INFO [PropertyMessageResources] Initializing, config='org.apache.struts.taglib.html.LocalStrings', returnNull=true
13:24:07,481 INFO [PropertyMessageResources] Initializing, config='org.apache.struts.taglib.html.LocalStrings', returnNull=true
13:24:07,616 INFO [PropertyMessageResources] Initializing, config='org.apache.struts.taglib.html.LocalStrings', returnNull=true
13:24:09,285 INFO [PropertyMessageResources] Initializing, config='org.apache.struts.taglib.html.LocalStrings', returnNull=true
13:26:09,387 ERROR [REQUESTS] Class/Method: tcRequestOperationsBean/getRequestDetail encounter some problems: Error while executing query to get request information.
13:26:09,388 ERROR [REQUESTS] Class/Method: tcRequestOperationsBean/getRequestDetail encounter some problems: {1}
java.lang.IllegalArgumentException
at java.sql.Date.valueOf(Date.java:138)
at com.thortech.xl.ejb.beansimpl.tcRequestOperationsBean.getRequestDetail(Unknown Source)
at com.thortech.xl.ejb.beans.tcRequestOperationsSession.getRequestDetail(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.jboss.invocation.Invocation.performCall(Invocation.java:359)
at org.jboss.ejb.StatelessSessionContainer$ContainerInterceptor.invoke(StatelessSessionContainer.java:237)
at org.jboss.resource.connectionmanager.CachedConnectionInterceptor.invoke(CachedConnectionInterceptor.java:158)
at org.jboss.ejb.plugins.StatelessSessionInstanceInterceptor.invoke(StatelessSessionInstanceInterceptor.java:169)
at org.jboss.ejb.plugins.CallValidationInterceptor.invoke(CallValidationInterceptor.java:63)
at org.jboss.ejb.plugins.AbstractTxInterceptor.invokeNext(AbstractTxInterceptor.java:121)
at org.jboss.ejb.plugins.TxInterceptorCMT.runWithTransactions(TxInterceptorCMT.java:350)
at org.jboss.ejb.plugins.TxInterceptorCMT.invoke(TxInterceptorCMT.java:181)
at org.jboss.ejb.plugins.SecurityInterceptor.invoke(SecurityInterceptor.java:168)
at org.jboss.ejb.plugins.LogInterceptor.invoke(LogInterceptor.java:205)
at org.jboss.ejb.plugins.ProxyFactoryFinderInterceptor.invoke(ProxyFactoryFinderInterceptor.java:138)
at org.jboss.ejb.SessionContainer.internalInvoke(SessionContainer.java:648)
at org.jboss.ejb.Container.invoke(Container.java:960)
at sun.reflect.GeneratedMethodAccessor134.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.jboss.mx.interceptor.ReflectedDispatcher.invoke(ReflectedDispatcher.java:155)
at org.jboss.mx.server.Invocation.dispatch(Invocation.java:94)
at org.jboss.mx.server.Invocation.invoke(Invocation.java:86)
at org.jboss.mx.server.AbstractMBeanInvoker.invoke(AbstractMBeanInvoker.java:264)
at org.jboss.mx.server.MBeanServerImpl.invoke(MBeanServerImpl.java:659)
at org.jboss.invocation.local.LocalInvoker$MBeanServerAction.invoke(LocalInvoker.java:169)
at org.jboss.invocation.local.LocalInvoker.invoke(LocalInvoker.java:118)
at org.jboss.invocation.InvokerInterceptor.invokeLocal(InvokerInterceptor.java:209)
at org.jboss.invocation.InvokerInterceptor.invoke(InvokerInterceptor.java:195)
at org.jboss.proxy.TransactionInterceptor.invoke(TransactionInterceptor.java:61)
at org.jboss.proxy.SecurityInterceptor.invoke(SecurityInterceptor.java:70)
at org.jboss.proxy.ejb.StatelessSessionInterceptor.invoke(StatelessSessionInterceptor.java:112)
at org.jboss.proxy.ClientContainer.invoke(ClientContainer.java:100)
at $Proxy767.getRequestDetail(Unknown Source)
at Thor.API.Operations.tcRequestOperationsClient.getRequestDetail(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at Thor.API.Base.SecurityInvocationHandler$1.run(Unknown Source)
at Thor.API.Security.LoginHandler.jbossLoginSession.runAs(Unknown Source)
at Thor.API.Base.SecurityInvocationHandler.invoke(Unknown Source)
at $Proxy786.getRequestDetail(Unknown Source)
at com.thortech.xl.webclient.actions.RequestAction.setPendingTask(Unknown Source)
at com.thortech.xl.webclient.actions.RequestAction.requestDetail(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.apache.struts.actions.DispatchAction.dispatchMethod(DispatchAction.java:280)
at com.thortech.xl.webclient.actions.tcLookupDispatchAction.execute(Unknown Source)
at com.thortech.xl.webclient.actions.tcActionBase.execute(Unknown Source)
at com.thortech.xl.webclient.actions.tcAction.execute(Unknown Source)
at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:525)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:710)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at com.thortech.xl.webclient.security.SecurityFilter.doFilter(Unknown Source)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:96)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:230)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:175)
at org.jboss.web.tomcat.security.SecurityAssociationValve.invoke(SecurityAssociationValve.java:182)
at org.jboss.web.tomcat.security.JaccContextValve.invoke(JaccContextValve.java:84)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
at org.jboss.web.tomcat.service.jca.CachedConnectionValve.invoke(CachedConnectionValve.java:157)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:262)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:844)
at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:583)
at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:446)
at java.lang.Thread.run(Thread.java:662)
Thanks,
Hemant.

How to find out the users assigned tasks within a GP process using GP API?

All,
I am trying to get details of all the running GP processes. As a part of this, I need to get the user information of who is assigned a task within a process.
Any inputs on this ?
Do I have to use the IGPProcessRoleInstance interface? Also how do I get the execution context of all the callable objects within the process?
-Thanks in advance
KN

Hi Chandan,
I am basically looking for the roles responsible for each task in the process.
I get the below exception when I execute the code provided by you.
<i>com.sap.caf.eu.gp.exception.api.GPEngineException: No active version of the given development object existscom.sap.caf.eu.gp.exception.api.GPEngineException: No active version of the given development object exists at com.sap.caf.eu.gp.exception.impl.ExceptionUtil.convertTo(ExceptionUtil.java:36) at com.sap.caf.eu.gp.process.impl.GPProcess.getActiveTemplate(GPProcess.java:116) at com.sap.caf.eu.gp.process.dt.impl.GPDesigntimeManager.getActiveTemplate(GPDesigntimeManager.java:276) at com.sap.caf.eu.gp.process.dt.impl.GPDesigntimeManager.getActiveTemplate(GPDesigntimeManager.java:269) at com.bp.cmd.wd.GPReporting.getOverdueProcesses(GPReporting.java:346) at com.bp.cmd.wd.wdp.InternalGPReporting.getOverdueProcesses(InternalGPReporting.java:184) at com.bp.cmd.wd.GPReportingView.onActionSubmit(GPReportingView.java:145) at com.bp.cmd.wd.wdp.InternalGPReportingView.wdInvokeEventHandler(InternalGPReportingView.java:169) at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87) at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67) at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420) at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132) at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335) at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143) at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:299) at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:746) at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:699) at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:255) at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:154) at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62) at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53) at javax.servlet.http.HttpServlet.service(HttpServlet.java:760) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325) at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887) at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241) at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92) at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)</i>
I guess this is because there is no active version of the process available now. Any inputs on this and how to avoid this ?
-Thanks,
KN.

"Approval workflow fragment has no user assignment" while adding approver

Hi all,
We are on SRM 5.0 ECS.
We are facing an issue in our quality system while this issue doesnt come up in dev system!
if I try change a PO and then click on the ADD APPROVER button and then on the link "ADD HERE".,I get the foll pop up msg :
"Approval workflow fragment has no user assignment".

Hi experts,
Any advice?

OIM 9.1.0.2: Remove user assigned to a task in Provisioning Process

Similar Messages

Maybe you are looking for