OIM-AD password sync not working

Hi All,
I am trying to sync password b/w AD and OIM. I have installed the password sync connector and followed the steps specified in the connector document. However when i change the password in AD, it is not reflected in OIM.
The connector version is 11.1.1.5. And the following have been done
1. deployed SPML-DSML service
2. Tested the SPML-DSML service
3. Installed the connector
4. Enabled the logs
5. Configured IT resource and enabled SSL
But the password changed in AD is not reflected in OIM. Please let me know if any additional steps have to performed.
Thanks

Hi Raghav,
Please find the log below
Debug [1/19/2012 3:54:05 PM] Inside sgsladds::sgslperwriteData YOOOO
Debug [1/19/2012 3:54:05 PM] Inside sgsladac c-tor
Debug [1/19/2012 3:54:05 PM] AD Host
Debug [1/19/2012 3:54:05 PM] localhost
Debug [1/19/2012 3:54:05 PM]
Debug [1/19/2012 3:54:05 PM] AD Port
Debug [1/19/2012 3:54:05 PM] 636
Debug [1/19/2012 3:54:05 PM]
Debug [1/19/2012 3:54:05 PM] AD Base DN
Debug [1/19/2012 3:54:05 PM] DC=abc,DC=xyz,DC=com
Debug [1/19/2012 3:54:05 PM]
Debug [1/19/2012 3:54:05 PM] Only dataattribute
Debug [1/19/2012 3:54:05 PM] Got Registry enteries
Debug [1/19/2012 3:54:05 PM] contact
Debug [1/19/2012 3:54:05 PM] description
Debug [1/19/2012 3:54:05 PM] Got Entiredn
Debug [1/19/2012 3:54:05 PM] OU=oimpwdsynctms.abc.xyz,ou=org1,DC=abc,DC=xyz,DC=com
Debug [1/19/2012 3:54:05 PM] Encrypted record already exists in Datastore
Debug [1/19/2012 3:54:05 PM] Already Exists
Debug [1/19/2012 3:54:05 PM] Encrypted record already exists in Datastore
Debug [1/19/2012 3:54:05 PM] Already Exists
Debug [1/19/2012 3:54:05 PM] Inside sgsladdsSearchUser
Debug [1/19/2012 3:54:05 PM] Firing Search Request
Debug [1/19/2012 3:54:05 PM] AD search for a user objectGUID is successfull
Debug [1/19/2012 3:54:05 PM] Count success
Debug [1/19/2012 3:54:05 PM] Search result fetched
Debug [1/19/2012 3:54:05 PM] 0:319 10 230 308 AQAAANCMnd8BFdERjHoAwE/Cl+sBAAAA6msQnVk0HkW+zmHr7+2nyAAAAAAmAAAAUABhAHMAcwB3AG8AcgBkACAARQBuAGMAcgBwAHQAaQBvAG4AAAADZgAAqAAAABAAAABU2g1ES3TOo35N6+zJPunGAAAAAASAAACgAAAAEAAAAEsx8lF3vt0oEaE0BhubB/A4AAAAl0IEcVLgvhvZryqKTWzBkjEatBoCMvekzXvlLlUfj/moGrX2NgWL9zlmeLKY9scstvPONOalbbgUAAAArNCxOGd02kIZELgCavo2IZpN5ZA=
Debug [1/19/2012 3:54:05 PM] --------------------&&&----------------
Debug [1/19/2012 3:54:05 PM] Inside sgsladds::sgsladdsgetData NEW Look
Debug [1/19/2012 3:54:05 PM] 0:319 10 230 308 AQAAANCMnd8BFdERjHoAwE/Cl+sBAAAA6msQnVk0HkW+zmHr7+2nyAAAAAAmAAAAUABhAHMAcwB3AG8AcgBkACAARQBuAGMAcgBwAHQAaQBvAG4AAAADZgAAqAAAABAAAABU2g1ES3TOo35N6+zJPunGAAAAAASAAACgAAAAEAAAAEsx8lF3vt0oEaE0BhubB/A4AAAAl0IEcVLgvhvZryqKTWzBkjEatBoCMvekzXvlLlUfj/moGrX2NgWL9zlmeLKY9scstvPONOalbbgUAAAArNCxOGd02kIZELgCavo2IZpN5ZA=
Debug [1/19/2012 3:54:05 PM] Encoded Data Extracted in sgsladdsgetData
Debug [1/19/2012 3:54:05 PM] 319 10 230 308 AQAAANCMnd8BFdERjHoAwE/Cl+sBAAAA6msQnVk0HkW+zmHr7+2nyAAAAAAmAAAAUABhAHMAcwB3AG8AcgBkACAARQBuAGMAcgBwAHQAaQBvAG4AAAADZgAAqAAAABAAAABU2g1ES3TOo35N6+zJPunGAAAAAASAAACgAAAAEAAAAEsx8lF3vt0oEaE0BhubB/A4AAAAl0IEcVLgvhvZryqKTWzBkjEatBoCMvekzXvlLlUfj/moGrX2NgWL9zlmeLKY9scstvPONOalbbgUAAAArNCxOGd02kIZELgCavo2IZpN5ZA=
Debug [1/19/2012 3:54:05 PM] Moving out sgsladdsgetData
Debug [1/19/2012 3:54:05 PM] Encoded Data Extracted
Debug [1/19/2012 3:54:05 PM] 319 10 230 308 AQAAANCMnd8BFdERjHoAwE/Cl+sBAAAA6msQnVk0HkW+zmHr7+2nyAAAAAAmAAAAUABhAHMAcwB3AG8AcgBkACAARQBuAGMAcgBwAHQAaQBvAG4AAAADZgAAqAAAABAAAABU2g1ES3TOo35N6+zJPunGAAAAAASAAACgAAAAEAAAAEsx8lF3vt0oEaE0BhubB/A4AAAAl0IEcVLgvhvZryqKTWzBkjEatBoCMvekzXvlLlUfj/moGrX2NgWL9zlmeLKY9scstvPONOalbbgUAAAArNCxOGd02kIZELgCavo2IZpN5ZA=
Debug [1/19/2012 3:54:05 PM] MAX_RETRY LIMIT count is not updated: OIM is down
Debug [1/19/2012 3:54:05 PM] 0
Debug [1/19/2012 3:54:05 PM] numretries ======
Debug [1/19/2012 3:54:05 PM] 0
Debug [1/19/2012 3:54:05 PM] Inside sgslcodsupdateChild
Debug [1/19/2012 3:54:05 PM] 0:319 10 230 308 AQAAANCMnd8BFdERjHoAwE/Cl+sBAAAA6msQnVk0HkW+zmHr7+2nyAAAAAAmAAAAUABhAHMAcwB3AG8AcgBkACAARQBuAGMAcgBwAHQAaQBvAG4AAAADZgAAqAAAABAAAABU2g1ES3TOo35N6+zJPunGAAAAAASAAACgAAAAEAAAAEsx8lF3vt0oEaE0BhubB/A4AAAAl0IEcVLgvhvZryqKTWzBkjEatBoCMvekzXvlLlUfj/moGrX2NgWL9zlmeLKY9scstvPONOalbbgUAAAArNCxOGd02kIZELgCavo2IZpN5ZA=
Debug [1/19/2012 3:54:05 PM]
Encrypted record data updated successfully
Debug [1/19/2012 3:54:05 PM] Inside sgsladac destructor
Debug [1/19/2012 3:54:05 PM] Password updation failed in child process
Debug [1/19/2012 3:54:05 PM]
Relaxing while processing records from datastore
I have provided the correct port numbers and also my certificate is same as the OIM server name. But still when the password is changed in AD, its not updated in OIM.
Thanks,
Bhavana

Similar Messages

OIM AD Password Sync issue

HI,
I am doing OIM 9.1.01 AD Password Sync.
I installed AD Password Sync connector in AD Machine. During installation it asked to mention OIM host name and SPML port for that i deployed SMPL in OIM using command line successfully.
While installation AD Password Sync Connector in Oracle Identity Manager Configuration Parameters i have given like these.
Host : rwoim
Port : 8080 (sample value)
Administrator Login :admin
Administrator Password: admin1234
OIM User Attribute : Users.User ID
OIM Application Server Type : WebLogic
Use SSL : Yes
Client Certificate Subject Name : TQL17
where in Port parameter (Enter the number of the port at which the Oracle Identity Manager SPML Web service is listening.
Sample value: 8080)
But i don't know which port SPML using and its enable or not in OIM server. I am strucked at installation.
Please give any one suggestion.
regards
Ramu

Hi Sagar,
i had success with OIM AD Password Sync process with AD Port 389 and SPML Port 7001 and passwords are updating from AD to OIM successfully.
From OIM over AD SSL passwords are updating in AD successfully.
But when again reinstalled the AD Password Sync connector with AD Port 636, passwords are not updating from AD to OIM.
Below the log file saying ldap_connect failed with
Debug [2/6/2012 5:25:35 PM] Server Down
***********Inside sgslldpcopenLDAPConnection****************
Debug [2/6/2012 5:25:35 PM] Inside sgsladac c-tor
Debug [2/6/2012 5:25:35 PM] AD Host
Debug [2/6/2012 5:25:35 PM] 10.129.149.137
Debug [2/6/2012 5:25:35 PM]
Debug [2/6/2012 5:25:35 PM] AD Port
Debug [2/6/2012 5:25:35 PM] 636
Debug [2/6/2012 5:25:35 PM]
Debug [2/6/2012 5:25:35 PM] AD Base DN
Debug [2/6/2012 5:25:35 PM] DC=oimad,DC=com
Debug [2/6/2012 5:25:35 PM]
Debug [2/6/2012 5:25:35 PM]
Debugging the code
Debug [2/6/2012 5:25:35 PM] Inside ConnectToADSI
Debug [2/6/2012 5:25:35 PM]
ldap_connect failed with
Debug [2/6/2012 5:25:35 PM] Server Down
Debug [2/6/2012 5:25:35 PM]
Debug [2/6/2012 5:25:35 PM]
Connection to AD failed
Debug [2/6/2012 5:25:35 PM]
***********Out of openLDAPConnection****************
Debug [2/6/2012 5:25:35 PM] Inside sgsladac destructor
regards
Ramu

My ipad mini is disabled and password is not working

Ipad mini disabled and password is not working. Unable to get serial because can't unlock ipad. Have not previously synced with a computer.

How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

HT4946 i want to backup my iPhone to my new iMac but my backup is selected to Encrypt Local backup and my password does not work.

I am trying to backup my iPhone on my new iMac iTunes. It is currently backed up on my PC and encrypted. Both PC and iMac iTunes have Encrypted backup selected. My password does not work for either iMac or PC. Should I go ahead and try to backup to my iMac iTunes.

Sorry to hear about your phone jb111jb! We'll do everything we can to help find the best route! The only way to remove the password is flashing the device, but that will erase all the content. Have you ever backed up using Verizon Cloud or Google Sync? Do you have a memory card?
AshleyS_VZW
Follow us on Twitter @VZWSupport

Office 365 AAD Password Writeback not working; Event Viewer Error: 0x80230619 (A restriction prevents the password from being changed to the current one specified.)

Hello all,
I'm currently setting up a Proof Of Concept setup with directory synchronisation and password syncing to Office 365, leveraging AAD Premium for the password reset and password writeback to on premises
AD functionality. Directory Sync + Password Sync is working flawlessly with the AADSync tool. However, upon requesting a password reset for a user, I'm hitting a password writeback error. The webpage states that the password does not meet the password
complexity policy, while it does. I can set that particular password for that account at the on premises AD without any problem.
In the event viewer at the AADSync server, I'm seeing this Error pop up whenever I try to reset the password:
An unexpected error has occurred during a password set operation. "BAIL: MMS(4032): ..\server.cpp(11003): 0x80230619 (A restriction prevents the password from being changed
to the current one specified.) Azure AD Sync 1.0.0475.1202"
My Setup:
Windows Server 2012 AD with a single forest
Seperate domain joined Windows Server 2012 for AADSync tool
AADSync version 1.0.0475.1202 with options password sync, password writeback enabled
Service account for AADSync tool with Replicating Directory Changes and Replicating Directory Changes All permissions
on root AD forest structure with inheritance to all objects. This account also has the permissions to Change Password and Reset Password on all descendant
User Objects.
AAD Premium for my office 365 tenant
AAD Premium licenses for the test users and the office 365 account used to sync to Office 365. This account is also Global Admin.
Could anyone help me with this? Is there something I’m missing here? My guess is that the AAD is not trusted or the service account for AADSync tool does not have the proper permissions. I’ve tried
many options, like setting the AADSync Service account to Enterprise Admin or granting the service account Full Control over that particular user.

Concerning my issue:
The Default Group Policy setting: Minimum Password Age is set at 1 day. As I was testing this feature with new users, their provisioned passwords were less than 24 hours old and the Minimum Password Age of 1 prevented the change of the password.
After changing this to 0 days in the Default Group Policy, my password resets started working for newly created users. While this might not have affected existing users in production, it had me looking and searching for permission issues on my AD.
So for those that might be experiencing ADSync Event ID 6329 and PasswordResetService Event ID 33008 Errors when trying to do a Password Reset using AAD Premium with Password Writeback, it might be helpful to check the applied password policy.
The issue is solved.

HT1212 my ipod is disabled... the password is NOT working... what do I do?

My ipod is disabled... the password is NOT working... what do I do?

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

My iTunes password does not work on my iPhone...

My iTunes password does not work on my iPhone, but it does on my MacBook. Why? This is really annoying. How can I solve my problem? I don't even know how to contact Apple.

dennythepest wrote:
My iTunes password does not work on my iPhone,...
Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430

My Apple store ID password is not working, so I tried to send a message to my Yahoo email (ID) the new password, so when it said that a massage was send to my email, but when I login to my yahoo email, I didn't receive any email from apple

My other apple store ID ([email protected]) password is not working, so I tried to send a message to my Yahoo email (ID) the new password, so when it said that a massage was send to my email, but when I login to my yahoo email, I didn’t receive any email from apple

You can send over WiFi, but it sounds as if you need to setup your Gmail account, or did you do this already?

SAP* and DDIC password is not working in Cleint 000

Hi,
I have Installed ECC 6.0 IDES Server on Windows 2k3 with Oracle database. First time i was able to login to 000 client with SAP* (default pwd) and did some post installation steps. Now the password is not working.
I tried the following:
Go to cmd prompt.
Sqlplus /nolog
conn /as sysdba
sqlplus>UPDATE SAPSR3.usr02 set uflag=0 where mandt='000' and uflag=128;
All the SAP users were Unlocked.
Then i tried delete command.
sqlplus>DELETE SAPSR3.usr02 where mandt='000' and bname='SAP*';
it says " 0 rows deleted "
Parameter login/no_automatic_user_sapstar= 0 is set.
Then Restarted the SAP server and tried logging with password pass it says user and password incorrect.

Hi,
As I have given in the earlier pls go through that link.
And also ...It is good practice to put back the automatic sapstar to 1 as this will not allow other to use same way as sap* /pass and log into the client.
The first thing is like create one more user in the 000 ,and also other super user incase if you have to use 000 with super user and have your own mechanism like have cutomised program and tcode with which you can activate 000 super user and use some thing like this...or it is only known to SAP BAsis Administrator.etc..
And also do not work on 000 for regular development or prd work make a copy of this client and start using them .
This has to be used only for Support pack other SAp related activities.
The first step after installation is to make a copy of these refrence clients.And start using them.
Secondly create the sap* usermaster in 000 and remove profiles .
And enable parameter login/no_automatic_user_sapstar to 1.
with this we are securing the super user from misuse.
Incase of emergency you need to delete the sap* user master from Oracle level then activate the prifile parameter and the loginto the 000 client using sap*/Pass.
Hope this helps.
Get back if you need more information.
Thanks.

When I attempt to updates apps on my ipad my password does not work. I tried updating them one at a time and it still doesn't work. I've reset my password and I can use the new password and update apps on my PC but not on my ipad. Why?

When I attempt to update apps on my ipad my password does not work, even when I attempt to update each app separately. When I change the password it works on my PC but not on my ipad. Why?

Try logging out of your account on the iPad by tapping on your id in Settings > Store and then log back in and see if it then works.

Wifi Sync not working on iOS 6 and iTunes 10.7 with iPhone 4S

I am running Windows 7 64-bit but WiFi Sync is not working on either my iPhone 4S or my wife's iPhone 4S. Worked fine before upgrading. All settings look correct in iTunes 10.7 and on our iPhones 4S's. Already tried uninstalling iTunes and all associated Apple programs (Bonjour, Apple Mobile Device Support, Apple Application Support, etc) and reinstalling iTunes but no help. Temporarily disabling Norton Firewall did not help. If I hook up either of our two 4S phones via USB wire, they Sync and Backup fine. Just WiFi Sync not working. Can't initiate sync from iPhones because button is ghosted stating it is waiting for PC to be present. Phones don't show up under Devices in iTunes unless hard-wired via USB cable. Any suggestions?

I am getting sync issues too (although on OSX) - seems like others are getting issues too:
https://discussions.apple.com/message/19834721#19834721
Good luck,
Chris

ICloud password works on everything but erasing all data. I got a new iPhone and need to wipe this one but am not sure how else to do this since the password is not working. Any suggestions?

iCloud password works on everything but erasing all data. I got a new iPhone and need to wipe this one but am not sure how else to do this since the password is not working. Any suggestions?

Firefox also makes regular backups of your bookmarks in a folder named bookmarkbackups in your personal settings folder. You can restore the backup to your new Firefox, but unlike importing the HTML-format file, it is a complete drop-in replacement, so if you have saved new bookmarks you do not want to lose, the export/import method may work better for you.
By default, Windows hides your personal settings folder so the easiest way to access it is from inside Firefox. You can use either:
* "3-bar" menu button > "?" button > Troubleshooting Information
* (menu bar) Help > Troubleshooting Information
* type or paste about:support in the address bar and press Enter
In the first table on the page, click the "Show Folder" button. This will launch a window showing your Firefox settings files.
You might want to back up this whole folder if you have other data you want to preserve from your XP computer.
Either way, you should find the bookmarkbackups folder here and when you click into it, find maybe 10 files with dates in their names.
The procedure to restore the file once you have it on removable media or some other convenient place is described in this article: [[Restore bookmarks from backup or move them to another computer]].
Regarding the other files and what you might find of use: [[Recovering important data from an old profile]].

TACACS enable password is not working after completing ACS & MS AD integration

Enable password for (Router, Switches) is working fine if identify source is "Internal Users", unfortunately after completed the integration between ACS to MS AD, and change the Identity source to "AD1" I got the following result
1. able to access network device (cisco switch) using MS AD username and password via SSH/Telnet.
2. Enable password is not working (using the same user password configured in MS AD.
3. When I revert back and change the ACS identity source from "AD1" to "Internal Users" enable password is working fine.
Switch Tacacs Configuration
aaa new-model
aaa authentication login default none
aaa authentication login ACS group tacacs+ local
aaa authentication enable default group tacacs+ enable
aaa authorization exec ACS group tacacs+ local
aaa authorization commands 15 ACS group tacacs+ local
aaa accounting exec ACS start-stop group tacacs+
aaa accounting commands 15 ACS start-stop group tacacs+
aaa authorization console
aaa session-id common
tacacs-server host 10.X.Y.11
tacacs-server timeout 20
tacacs-server directed-request
tacacs-server key gacakey
line vty 0 4
session-timeout 5
access-class 5 in
exec-timeout 5 0
login authentication ACS
authorization commands 15 ACS
authorization exec ACS
accounting commands 15 ACS
accounting exec ACS
logging synchronous
This is my first ACS - AD integration experience, hoping to fix this issue with your support, thanks in advance.
Regards,

Hi Edward,
I created a new shell profiles named "root" as the default one "Permit Access" can't be access or modified, underneath the steps I've made.
1. Create a new shell profile name "root" with max privilege of 15. And then used it in "Default Device Admin/Authorization/Rule-1" shell profile - see attached file for more details.
2. Telnet the Switch and then Issue "debug aaa authentication" using both "Root Shell" and "Permit Access" applied in Rule-1 profile.
Note:
I also attached here the captured screen and debug result for the "shell profiles"

My appleID password is not working on my iPhone.

I have reset, resynched, reassociated my ID nothing is working. I only noticed it yesterday and I think it's only been a week or so. I noticed my phone and none of my ipods are associated with my itunes even though they have been for at least two years. I added an ipad last month. The password is not working on the ipad either. Please help! It works in my actual itunes and apple account when I log in on my laptop.

https://discussions.apple.com/thread/5478030?tstart=0

After a restore from Time Machine my login password does not work.

My HD crashed and I replaced the HD. I then restored from Time Machine. After it was done restoring it prompted me for my apple ID and password and account info. Now when I try to login, the password does not work. After several failed passwords, it says I can reset my password using my apple ID. How do you do this? I click on the message and it just disappears. I can't login!

Is it your actual Apple ID login password that you're talking about (which is obviously working since you got into this forum) or the password for your user account. If the latter, simply boot to your ML Recovery partition (holding down the Command and R keys while booting) and set a new password via Terminal.
Boot into your Recovery partition and, from the Utilities menu, open Terminal. In Terminal, type in:
resetpassword
...a small app will run allowing you to select a user and change the password for that use. Enter the new password twice (the second time to verify) and give yourself a password 'hint'. Then reboot and use your new password on your account.
Clinton

OIM-AD password sync not working

Similar Messages

Maybe you are looking for