OIM and OIA same box?

Looking for recommendations here. What is the best way to install OIA? in the same weblogic cluster as OIM? Any reason not to use weblogic or the same app server? Any special considerations for a cluster (2-node)?
Thank you!

I think it all depends on your hardware capabilities, the size of your environment, and your cluster configurationsEXCELLENT ADVISE!
I would recommend putting OIA on an environment that allows you to access as much heap as possible.SOMEONE GIVE THIS GUY A MEDAL!!!
You guys might as well say, 'Make sure you turn on your computer before installing' or 'Use your fingers when installing OIM/OIA... using your toes is prone to error'
OK rant over,
OOTB, you need to put OIA and OIM on separate managed domains. The conflict of .jars caused trouble when when startup and also integration. The location of the DB is fine though, Use RCA and the OIA schema file to build up the DB's. IDEALLY, use the same app server technology when talking to both products, different app server uses different protocols. I had problems with apache and glassfish when I was trying to mix and match
Regards,
Daniel

Similar Messages

Install Essbase 11.1.2 and OBIEE 11g on one and the same Box (Linux 64bit)

Hello
Did anyone already try to get Essbase 11.1.2 and OBIEE 11g installed on the same box? In my case I am trying it on OEL 5.5 64bit.
How did you proceed?
First Essbase or first OBIEE or have WLS installed standalone first?
Encountered any hurdles?
Thanks for any hints or links.
Thomas

let me check... yeah u can do that dude i cant tell u how to do it but i can give u some idea
try to see properties file or db files for web logic ...i think it where the port number are stored and in war file is where multiple instance info is stored
iam sure that u can create multiple instance as long as u give different ports (yeah u have to other wise u cant config it :))
Go through this doc
http://docs.oracle.com/cd/E13222_01/wls/docs81/adminguide/overview.html
hope this info helps some sort :)
Edited by: KVC on Nov 26, 2011 8:28 PM
Edited by: KVC on Nov 26, 2011 8:45 PM

I cannot get firefox to download -- a box comes up about firefox being a binary file (?) and do I want to save it or cancel -- I was told to save it, which I did but, after saving, I tried to get it to download again and this same box came back up

Cannot get firefox 4.0 to download - saved binary code download - download still doesn't work - cannot use computer until this is resolved

For Flash, could you try downloading the "full" installers from this page:
https://www.adobe.com/products/flashplayer/distribution3.html
In the first table, there are two rows for Windows: one for the ActiveX control for IE, and one for the plugin for Firefox. You might want to grab both. And try the .msi files instead of the .exe files to see whether those work better.
Will either of those install?
It's odd that on a newly rebuilt system your More System Details shows that you have a user.js file, which is an optional settings files used to override your previous session settings. This is not part of the standard Firefox installation, so if you did not create that file yourself, you may want to investigate or delete it. This article has more information on that: [[How to fix preferences that won't save]].

OIM and OIA11g Integration(error while importing Resource metadata into OIA

Hi,
I followed the below link and trying to integrate OIM 11.1.1.5 and OIA 11.1.1.3.6
And both are deployed different weblogic domains..
http://wikis.sun.com/display/OIA11gDocs/Integrating+With+Oracle+Identity+Manager,+Preferred+Method
I am getting error in Step 6: Import the Oracle Identity Manager (OIM) Data Into Oracle Identity Analytics (OIA) -> To Import Resource Metadata
10:56:21,484 DEBUG [DBIAMSolution] publishing import starting event...
10:56:21,623 DEBUG [OimUtilityFactory] ************** OIM Connection Params *************
10:56:21,628 DEBUG [OimUtilityFactory] XL Home ---> C:\Oracle\Middleware\Oracle_IDM1
10:56:21,630 DEBUG [OimUtilityFactory] login config ---> C:\Oracle\Middleware\Oracle_IDM1\server\config\authwl.conf
10:56:21,631 DEBUG [OimUtilityFactory] ****************************************************
10:56:21,636 DEBUG [OimUtilityFactory] Xellerate Discovery Settings {}
10:56:21,638 DEBUG [OimUtilityFactory] ********** Connecting to OIM Server **********
10:56:21,774 ERROR [IamDbNamespaceImporterHelperImpl] Error connecting to OIM
Thor.API.Exceptions.tcAPIException: javax.security.auth.login.LoginException: java.lang.SecurityException: [Security:090304]Authentication Failed: User xelsysadm javax.security.auth.login.FailedLoginException: [Security:090302]Authentication Failed: User xelsysadm denied
     at Thor.API.tcUtilityFactory.<init>(tcUtilityFactory.java:166)
     at com.vaau.rbacx.iam.util.oracle.oimapi.OimUtilityFactory.getUtilityFactory(OimUtilityFactory.java:67)
     at com.vaau.rbacx.iam.db.helpers.IamDbNamespaceImporterHelperImpl.readNamespaces(IamDbNamespaceImporterHelperImpl.java:87)
     at com.vaau.rbacx.iam.db.DBIAMSolution.readResourceMetadata(DBIAMSolution.java:642)
     at com.vaau.rbacx.iam.service.impl.RbacxIAMServiceImpl.importResourceMetadata(RbacxIAMServiceImpl.java:472)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
     at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
     at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
     at org.springframework.transaction.interceptor.TransactionInterceptor.invoke(TransactionInterceptor.java:106)
     at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
     at $Proxy274.importResourceMetadata(Unknown Source)
     at com.vaau.rbacx.scheduling.executor.iam.IAMJobExecutor.execute(IAMJobExecutor.java:107)
     at com.vaau.rbacx.scheduling.manager.providers.quartz.jobs.AbstractJob.execute(AbstractJob.java:72)
     at org.quartz.core.JobRunShell.run(JobRunShell.java:202)
     at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:534)
10:56:21,784 ERROR [DBIAMSolution] Error Importing Namespaces : javax.security.auth.login.LoginException: java.lang.SecurityException: [Security:090304]Authentication Failed: User xelsysadm javax.security.auth.login.FailedLoginException: [Security:090302]Authentication Failed: User xelsysadm denied
10:56:21,836 DEBUG [DBIAMSolution] publishing import completed event...
10:56:21,903 INFO [VaauSchedulerEventListenerImpl] Job executed: oim tst, IAM
10:56:21,904 INFO [VaauSchedulerEventListenerImpl] Job run time: 0s
10:56:21,904 INFO [VaauSchedulerEventListenerImpl] Next Run: null
Thanks..
Edited by: IDMuser19 on Aug 24, 2011 4:06 PM
Edited by: IDMuser19 on Aug 25, 2011 10:58 PM

Thanks rajiv for the reply..
No i am not able to import users too..getting same error in the rbacx.log
I tried with below details
Xellerate Home: C:\Oracle\Middleware\Oracle_IDM1
Login Config : C:\Oracle\Middleware\Oracle_IDM1\server\config\authwl.conf
User Name: XELSYSADM
Password : ●●●●●●●●
( in version 11.1.1.3.6 does not prompt for these two Provider URL: t3://localhost:14000 , Initial Context Factory: weblogic.jndi.WLInitialContextFactory)
here the OIA and OIM are in different domains.. i am able loginto OIM with xelsysadm without any problem just followed the instruction in the integration doc not sure where i did a mistake..
Please let know if have any idea..Thanks..
Edited by: IDMuser19 on Aug 30, 2011 8:25 AM

BW and R/3 in the same box with a single instance ECC 5.0

Hi anybody using this scenario of having bw and r/3 in the same box....we are planing to consider in our project.
will be happy if anybody can provide me some help on this.
thanks and regards
neel

HI Neel Kamal,
I think its a better option to distinguish OLTP like R/3 or ECC and OLAP like BW rather on a single instance
from the above posts
Let us know if this holds good
Thanks,
Raj

ABAP and JAVA Stack in the same box

Hi all,
I have installed Java Sneak preview first and after I installed ABAP Sneak in the same box.
Everything is working fine but I noticed a little detail.
My jcontrol.exe service disapeared from SAP Management Console.
I mean before installed ABAP Stack my MMC had 2 divisions in my J2E instance:
server 1 with 2 Process msg_server.exe and enserver.exe
server 0 with 2 Process jcontrol.exe and igswd.exe
After installed ABAP Stack, my server 0 became part of NSP Instance and jcontrol process is not displayed anymore anywhere.
Instead I see now msg_server.exe and disp+work.exe and igswd.exe that of course are Process of the ABAP system.
Does anyone have a nice explanation for this?
Regards,
Mauricio

Hi mauricio,
I was installing Netweaver sp15 both Java and ABAP version on one PC. But it seems they are working.
Can you please tell the procedures to follow, to have good installation?
If I load java version first and then ABAP i get error at step 11.
Did you parttition the drive in to 2 or you installed on the same partition?
Your help will be greatly apprecieated.
Thanks

Picture and text in the same box for the calender?

Is it possible to put a small picture in the box (for say May 4) and also get a short text line in the same box?
When I'm doing it now, the picture takes up the whole box and the text goes underneath.
Thanks

Unfortunately that's how it works. If you have a 3rd party editor you could add the text to the picture before adding it to the calendar. Put in a feature request at http://www.apple.com/feedback/iphoto.html.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

I am so frustrated. I put ab object and/or a text box on a page and then cannot select it - the Text cursor (not pointer) is put on the object or text box and nothing happens. It is so frustrating! I then open up Everweb and the same thing,

I put an object and/or a text box on a page and then cannot select it - the Text cursor (not pointer, just the text cursor shows) is put on the object or text box and nothing happens. It is so frustrating! I then open up Everweb and the same thing, I create an object and then try and elect it to make it bigger etc and cannot. I know it must be something system wide as it happens in apps other than Pages.

I put an object and/or a text box on a page and then cannot select it - the Text cursor (not pointer, just the text cursor shows) is put on the object or text box and nothing happens. It is so frustrating! I then open up Everweb and the same thing, I create an object and then try and elect it to make it bigger etc and cannot. I know it must be something system wide as it happens in apps other than Pages.

Wen i close firefox using win 7, and restart it, i get a box that says it is already running and to close it before using--but it wort close and the same thing keeps happening. what is wrong--previous versions on vista did,nt do this?

if i open firefox and use it, when i get to last window and close it, if i try to reopen it, it says already open and to close pages but it will not close--the same box keeps coming back
== This happened ==
Every time Firefox opened
== first time i loaded it onto new computer with win 7 64 bit

Firefox v 3.6.3 running Win 7 Home premium. About every 6th or 7th time I go to open Firefox from my desktop I receive the same msg as the original poster receives. I must restart to clear up the problem. When I select restart it states a forced shutdown is required and asks if I want to proceed. I click yes, the computer restarts and problem is fixed until the next occurrence.
My thanks for any assistance that may be available.
If you require a screenshot let me know, please include instructions on how to do this though.

Query for oracle 9i and 10g on same box

HI
All,
I have oracle 9i installed on one box it has
oracle home /u01/app/oracle/product/9.2.0
and i am gonna install oracle 10g on different home /u01/app/oracle/product/10.2.0
Do I need to specify different location for OraInventory?
so what else I need to take care?
Thanks,
Vishal

So there should not be a problem if it is the same
orainventory location for both 9i and 10g right.There should be no problem.
can you throw more focus on below ?
When managing different oracle versions on the same
box you should take care of environment variables to
properly point to each ORACLE HOME and PATH, and
ensure different ports do not conflict.
For instance, you should use the Listener of the latest release on the server (in this case 10g) to services all the databases on that box 9both 9i and 10g).
When you want to startup and shutdown 9i database, you do not want to shutdown a 10g database by mistake. Hence, setting things like ORCLE_HOME and ORACLE_SID.
Also, Oracle Server make use of libraries. You do not want to mix up 9i and 10g libraries. hence take care when you set things like PATH, LD_LIBRARY_PATH etc
The same applies to all Environment variables you want to set on the server that has different oracle releases. You just need to ensure that when you logon, your variables are set correctly for the intended oracle release before you do anything.

Crystal Report 8.5 and 9 installed on the same box

Is it possible to have Crystal Report 8 and 9 installed on the same server?

Hi Michael,
You can install Crystal Report 8.5 and 9 on same box.
However, there are chances that dll may conflict and few issues may occur.
Try to install on different harddrives.
Regards,
Shweta

When I mouseover links, a gray dialog box appears but it is always blank. I have checked on other browsers and the same link brings up dialog.

When I mouseover links, a gray dialog box appears but it is always blank. I have checked on other browsers and the same link brings up dialog.
I am running Firefox RC.

figured it out:
- power off mac and turn back on while holding down Command + R (dont do it on an external keyboard just to be safe)
- choose the re-install Lion option (I'm sure there is another way to re-install Lion, this is just the way I did it, not saying its the best or only method)
- DO NOT INSTALL MACBOOK (Mid 2012) Software Update 1.0 - THIS SCREWS ADOBE UP!

Dev and Qa in the same box

Hi All,
If I have the DEV and QA in the same box and the sid s being EXD and EXT respectively pointing to the same technical system. Should we assign the role of Integration server to both the business systems or EXD should be integration server and EXT being the application system?? Hows it work for a single SLD for Dev and QA?

Teresa,
Adding to stefan, in your SLD, you create Transport Groups and then assign your Business System to the Correct Transport Groups ( when you assign a Business System to an Integration Server , it is added to the Transport Group to which the Integration Server belongs ) and then you assign the Transport Targets to the Source and Target business systems.
note : When migrating objects from one environment to another, all Source Businss systems should belong to the same transport group.
Regards,
Bhavesh

OEM 12c and OVM on the same box?

Hi Guys and Girls!
Thank you in advance for your support!
Could you please share you experience, best practices and gotchas with installing OEM 12c and OVM on the same OL 5x box?
We would like to install OEM 12 R2 on a OL57 server with an existing production (Oracle DB SE 11.2.0.3.0) Oracle VM Manager 3.1.1.625 installation.
Some questions:
1- Does Oracle support OEM and OVM on the same server?
2- If Oracle VM Manager and the SE DB are already installed on an OL 57 server in /u01/app/oracle/product, can OEM 12c R2 be installed into /u01 as well, or should we use a different directoty, i.e. /u02?
3- Will the OEM 12c installation program be able to use the same DB as Oracle VM Manager, i.e., its just creates the OEM DB schema and goes on its mary way without harming the Oracle VM Manager DB schema?
Thank you,
Roddy

Alessandro,
Thank you for your reply!
The irony with my OEM and OVM on the same box question is that the Oracle Sales & Support teams as well as public Marketecture has been recommending collocating OEM & OVM!
I agree with you 100% about resource consumption, and considering how often we must restore/reset Oracle VM Manager I am curious how supportable an OEM & OVM install is on the same box. 99% of my customers are not interested in supporting MySQL, i.e. the DBAs know Oracle not MySQL. As long as Oracle VM Manager resets (DB deletes) and UUID restores (uninstalls and re-installs) will not damage OEM its all good.
Thanks again for your support!
Roddy

BI and ERP (HR) on the same box

Hello,
the question is about running together in one instance the transactional system (SAP HR on Netweaver 2004s) and the BI of the Netweaver 2004s.
Any experiences with that or criteria for going for that architecture?
Kind regards, Ralf

Hi Ralf,
It should work I guess though I have no experience with this.
We have installed Solution Manager and BI on the same box.
Bye
Dinesh

OIM and OIA same box?

Similar Messages

Maybe you are looking for