OIM and Remote Manager

Do you know if out of the box connectors bundled(9.0.4.1) are supported using Remote Manager?
Remote Manager and OIM Server are in a different location
Regards

The majority of the out of the box connectors don't require (or use) remote managers. There are a few exceptions, typically when the target systems don't have network aware libraries available at all or on all the operating systems that the OIM server supports.
You can't use a non-remote manager connector via remote manager as there are required changes in both the forms and the underlying adapter code.

Similar Messages

Screen sharing and remote management no longer working after some uptime

Server is withoiut monitor.
Users need to login via screen sharing from time to time.
"Enable screen sharing and remote management" is ticked in Server.app everything is working fine (for days, weeks).
ARD reports "Screen Sharing Available", so remote management is not running how it should.
Screen Sharing.app is "Connecting…" forever.
Kickstarting ARD (http://support.apple.com/kb/HT2370) does not help.
Restart fixes it.
Is there a workaround (over ssh) or a fix?

seduc wrote:
Do you know if
fdesetup authrestart
works then too?
Off-hand, no. I don't. See this posting, or as would be typical in any case, try it?

Screen Sharing and Remote Management

Is there a way in 10.6 to make both Screen Sharing and Remote Management run at the same time?
In the past (10.5), you could convince Mac OS to run both Screen Sharing and Remote Management to run simultaneously. I say "convince" because you could not enable them both through System Preferences. You could turn one on, then use Terminal to enable the other. This worked great for me, because I needed remote management for the machines I managed, and the users need screen sharing to work from home.
However, the work-around for 10.5 no longer seems to work for 10.6. Has any one gotten this to work yet for 10.6? Thanks!

I figured this out. First enable Remote Management via System Preferences. Then create /private/etc/ScreenSharing.launchd with 'enabled' as it's contents.

What's the difference between Screen Sharing and Remote Management?

As the title asks. What is the difference between the two?
Because heres the thing. I set Screen Sharing on in Sharing. Then a few days later I will go back to the Sharing preferences and instead of Screen Sharing being checked. Remote Management is now checked, not Screen Sharing. What's the deal? Is that normal?
I was wondering if it was because I log into my iMac sometimes using my iPhone with that Mocha VNC program. Its the only program I use to remotely control my computer. Is that it?
Any help I can get is appreciated! Thanks!

Remote Management provides support for the additional functionality of Apple Remote Desktop as compared to a standard VNC setup. The options are otherwise identical.
(35284)

Java code to check connection to OIM 11g Remote Manager

Hi,
I need to check if the remote manager is running or not, for that I am making an API call:
What RMS data needs to be passed as argument to the below method?
RemoteManagerOperationsIntf rmObj = (RemoteManagerOperationsIntf)Platform.getService(RemoteManagerOperationsIntf.class);
rmObj.isRMRunning(+RMSData+);
Please help.

package com.thortech.xl.remotemanager;
import java.io.Serializable;
public class RMSData
implements Serializable
private String rmName;
private String serviceName;
private String url;
private boolean isRunning;
private boolean isITResource = true;
private RMRemote rmInstance;
public RMSData()
public RMSData(String serviceName, String url, RMRemote rmInstance)
this.serviceName = serviceName;
this.url = url;
this.rmInstance = rmInstance;
public boolean isITResource()
return this.isITResource;
public boolean isRunning()
return this.isRunning;
public RMRemote getRmInstance()
return this.rmInstance;
public String getServiceName()
return this.serviceName;
public String getUrl()
return this.url;
public void setITResource(boolean b)
this.isITResource = b;
public void setRunning(boolean b)
this.isRunning = b;
public void setRmInstance(RMRemote remote)
this.rmInstance = remote;
public void setServiceName(String string)
this.serviceName = string;
public void setUrl(String string)
this.url = string;
public String getRmName()
return this.rmName;
public void setRmName(String string)
this.rmName = string;
-Kevin

Encryption and Remote Management

Hey All:
Hope you all having a good New Year so far.
Just a quick question for anyone that may know. I am wondering if
ZenWorks
will encrypt Remote View and Remote Control by default. I looked in my
manuals but wasn't able to find anything yet.
Any help would be greatly appreciated.
Thanks
Brad Marchand
State of North Carolina
Dept. of Juvenile Justice

Great, thanks for the help Shaun.
"Shaun Pond" <[email protected]> wrote in message
news:[email protected]..
> Brad,
>
> no, they don't encrypt, but since only screen updates are sent over
the
> wire, the chances of being able to reconstruct the data is very very
> small
>
> --
>
> Shaun Pond
> Novell Support Connection SysOp
>

ZCM 10.3.1 and remote management from Opensuse 11.3

Hi,
I am have finally started to test ZCM as I am a die hard ZEN 7.0 fan...
Anyhow I like the concept of being able to remote control from Linux.
However I am running 64bit OpenSuse. Anyone know how I can get this
working?
Every time I try to remote manage it tells me to install the remote
management viewer(from Linux) It works fine from Windows
The install seems to install correctly.
Anyone know what I have done wrong or what I need to do to get this to
work..
Oh I also run KDE4
Thanks

On 21/09/10 5:36 PM, thsundel wrote:
>
> Peter Norris;2024697 Wrote:
>> Hi,
>>
>> I am have finally started to test ZCM as I am a die hard ZEN 7.0 fan...
>>
>> Anyhow I like the concept of being able to remote control from Linux.
>> However I am running 64bit OpenSuse. Anyone know how I can get this
>> working?
>>
>> Every time I try to remote manage it tells me to install the remote
>> management viewer(from Linux) It works fine from Windows
>>
>> The install seems to install correctly.
>>
>> Anyone know what I have done wrong or what I need to do to get this to
>> work..
>>
>> Oh I also run KDE4
>>
>> Thanks
>
> Don't think openSUSE is supported but you could try reading this:
> 'Novell Doc: ZENworks 10 Configuration Management Remote Management
> Reference - Installing the Remote Management Viewer'
> (http://www.novell.com/documentation/...a/biydyk4.html)
> It requires you to install glitz package.
>
> Thomas
>
>
Yeah figured that was going to be the answer. I installed the glitz
package, but it doesn't work. Oh well just thought I would see if
anyone else has it working, I have a SLES 11 server we run FreeNX on, so
I guess we can use that..
Cheers

Remote Apple Events and Remote Management

Good day: Simple question - I discovered that RAE and RM were both on in my Sharing prefs; I did not turn them on. Can an application turn them on automatically, or was someone spying?

Your text is not clear: you wish to connect to the internet, and you cannot do that? or you want to share your internet connection, to be used by other computers, and you do not know how to do this?
The title of your thread indicates the latter (this is the meaning of share), but your text rather indicates the former situation.
In order to share net, you must first mac connected to the net up and running, but I understand you did not get to that point, right?
Please be clear.

Reg : OIM Remote Manager

Hi All,
Can anyone please tell me how to call OIM Remote Manager from a Java program?
Thanks in Advance.
SP

- You would require to create Remote type functional tasks inside any adapter task for any of the adapters you create, these remote tasks are actually executed remotely.
- In addition to it make sure that you have placed the jar files which holds the java logic in both the OIM and Remote Manager location.
- Configuration of Remote Manager should be intact as per documentation.
Thanks
Sunny

How to assign OIM Remote Manager as a service on Win 2003 ?

I want to assign OIM Remote Manager as a service on Win 2003. I've used instsrv.exe to install srvany.exe and configured Parameters-Application, Parameters-AppDirectory and Parameters-AppParameters string values using parameters from remotemanager.bat file. I've obviously make same configuration mistakes because when I try to start service which I create, I can't see any new java application and Remote Manager log stays calm.
Would you please give me advices how to configure Windows registry to start Remote Manager as a service.
Regards
VeePee

Hi folks,
I am a little bit confused about this.
The metalink note explains how to convert remote manager to a windows service using the java service wrapper (and noted that this approach applies to version 9.0.1)
It is explicitly declared that OIM’s Remote Manager can run as a Windows Service in OIM 9.1 datasheet (see: http://www.oracle.com/global/kr/download/pdf/ofm/OIM_DATASHEET.PDF) but admin/install guides does not include any configuration guidance about how to do it.
Is there an easier way for v 9.1 to install remote manager as a service or do we use Java Service Wrapper method for this version also ??
cheers
// gurol
Edited by: Gurol Erdogan on Dec 13, 2008 11:16 AM

Difference between remote management and vnc

Difference between remote management and vnc

By VNC I will presume you mean 'Screen Sharing'.
Screen Sharing in System Preferences - Sharing is purely for remote control and is based on the VNC protocol with a few extra features added by Apple.
Remote Management in System Preferences does everything Screen Sharing does and is fully compatible with another Mac doing just Screen Sharing, i.e. it allows remote control. However it can also do additional things. It is intended for use with Apple's Remote Desktop Administration software which can use this to send files to a Mac, send (Unix) commands to a Mac and ask for a report from the Mac (e.g. how much RAM it has).
If you don't have Apple Remote Desktop there is no real point enabling Remote Management instead of Screen Sharing.
Both Screen Sharing and Remote Management can also be configured to allow 100% standard VNC connectivity from say a PC, as standard they only accept connections from Macs.

System preferences, sharing, remote management?

Hello,
Could someone tell me where I can find more information of how to use remote management that is under system preferences, sharing. What is the difference between screen sharing and remote management? It will be a great help as I am learning my way round my mybook and this feature would be of great help.
Thanks!

Hi Allan,
Open System Preferences (Applications folder) and click the Sharing icon. Very bottom right of that window click the ? mark. That will prompt the Help Viewer for the Sharing preferences. You can type in keywords at the top of that window in the search field. Example: Remote Management
Mac OS X: About File Sharing
Carolyn
Message was edited by: Carolyn Samit

Back to My Mac / Remote Management / Screen Sharing

I'm managing computers for my family spread across 3 states. I would love to get screen sharing working but it's just not happening. I've tried the steps in the following KB article and that's allowed me to access two mini servers (one 10.7 and one 10.6.8) at home. However, I can't access a MBP at home and I can't access my family's computers (via screen sharing) at all. Here's the KB article...
http://support.apple.com/kb/HT3486
Here's all I'm seeing (5 computers are "missing")
I've tried NAT port forwarding (Airport Extreme/Time Capsule) for "Apple Remote Desktop" to the computers internal IPs on ports 5900 & 3283. I've tried it without. I've tried both "Screen Sharing" and "Remote Management" in preferences. I've made sure I have my own account with admin privledges on all machines etc. This is, of course, all peppered with the occasionaly outburst of foul language...
What am I missing?

Spoke with Apple who spoke with Apple and so on. Tech support for Apple Desktop Remote acknowledges (as best they could) that there is a bug/ problem. Yes, reverting to an older (3.5 - 3.4 ARDagent) solves the problem (short term ?). They captured my OS info and will get back to me in 3-5 days - how do you like them apples! So, revert to ARDagent 3.4 and you can remote connect - may try this later... will post if it works. Here's what's been posted on this: https://discussions.apple.com/thread/3192451?start=0&tstart=0

E4200V2 Remote Management is inoperative

Remote Management does not work on this router. Version of firmware is reported to be current (no update available). The user guide says click on administration and then Management, find Remote Management and Select remote management and select enabled... However in the "Linksys Smart WiFi" interface there is selection for management and remote management.. Firmware is 2.1.39.!
It is a real problem when a router can not be managed remotely!!!

Rudi F wrote:
Remote Management does not work on this router. Version of firmware is reported to be current (no update available). The user guide says click on administration and then Management, find Remote Management and Select remote management and select enabled... However in the "Linksys Smart WiFi" interface there is selection for management and remote management.. Firmware is 2.1.39.!
It is a real problem when a router can not be managed remotely!!!
Rudi F wrote:
Correction to my post = However in the "Linksys Smart WiFi" interface under Administration there is NO selection for
management and remote management..
Linksys routers with Smart Wi-Fi Interface can be accessed remotely through www.linksyssmartwifi.com once you have signed-up for a Smart Wi-Fi account using your email address. This actually make things easy for us since we don’t need to set-up remote management anymore in order to remote access our routers.

Need Help in Remote Manager and OIM Configuration

Guys,
I am using OIM9.1.01 with Exchange 2010 , currently i have installed my remote manager on Exchange server, and its working fine. Now client want to remove Remote Manager from exchange server , and to be get install on some other server.
will it possible to install Remote Manager on some other server than OIM and Exchange , if yes , how do i proceed with that.
Thanks.

Thanks Nishith Sirji,
I am confuse about one thing , how do remote manager will understand "which database server is he going to create mailbox"? because currently I am executing powershell on exechange system only ,so no problem. but when i will installl it on some other system, how do my RM will know , where to create Maiilbox (which machine).
do i need to configure my exchange box details anywhr in Remote Manager?
Thanks.

OIM and Remote Manager

Similar Messages

Maybe you are looking for