OIM , Approval WorkFlow Page Error

Dear All,
Kindly if anyone can share some experience on the following issue:
1 - I have IDM 9.1.0.x
2 - To define the approval workflow when I try to open the workflow designer i.e Manage Resources>Manage> select resource ... it shows error page with no error number just a link to IDM admin.
My question is:
1- Could it be due to some issue in connector of the relevant application (MySQL on backend> GTC with Java customized connector)?
2- Or it could be a problem in the IDM system itself related to some configurations, missing installation components.
what should I check to verify if it is some issue with the IDM servers settings?
Thanks

thanks for your reply,
can you please be a little more elaborated and guide me how to remove this error, when click on the resource instead of opening workflow designer it opens a page with a link to admin, not showing any error just "A system error has encountered" message.
thanks.

Similar Messages

  • No approval workflow  found error while processing the  Bid Invitation

    We are working on SRM 5.0 (SP level6). We are able to create the bid invitations successfully from the sourcing cockpit. However while saving the changes in the bid invitations, system shows the error "No approval workflow  found". When checked in SWB_PROCUREMENT , no workflow exists for object" BUS2200, Bid Invitation EC"in the standard SRM.
    Kindly confirm what is missing...
    NNK

    Hi Nitin,
      Use T-code OOCU - Task custamising overview. Then SRM-EBP --> SRM-EBP-WFL then active event linking.
      Please activate WS145000026 for automatic approval of bid. or WS145000027 for one step approval of bid invitation.
    This will help to solve your problem. IF not please reply me the error.
    Regards
    Apparao.

  • OIM Approval Workflow starting Exception

    Hi to all. I'm working with approval workflow in OIM11g and I've followed the OBE for the design of a ResourceSerialApproval Workflow. When submitting a request which is to be approved by this workflow at request level, the request creation fails with this exception:
    IAM-2050014:An error occurred while initiating approvals for request oracle.iam.platform.workflowservice.exception.IAMWorkflowException: Unable to instantiate the workflow process due to null. The corresponding error message is {1}.
    I've searched this forum for the error and seen that maybe it could be caused by a bad props file when registering the workflow: this is NOT my case. The workflow gets correctly deployed.
    Could anyone help me?
    Please I have no idea on how to solve this problem.
    Thanks in advance,
    Giuseppe.

    Hi,
    Open your approval workflow in Jdev, open "ApprovalProcess.bpel" file in source mode,
    Check if custom attribute is getting assigned before the payload is loaded:
    something like
    <copy>
    <from variable="resourceAdmins"/>
    <to variable="initiateTaskInput" part="payload"
    query="/ns2:initiateTask/task:task/task:payload/task:ResourceAdministrators"/>
    </copy>
    <copy>
    <from>
    <payload xmlns="http://xmlns.oracle.com/bpel/workflow/task">
    <RequestID xmlns="http://xmlns.oracle.com/bpel/workflow/task"/>
    <RequestModel xmlns="http://xmlns.oracle.com/bpel/workflow/task"/>
    <RequestTarget xmlns="http://xmlns.oracle.com/bpel/workflow/task"/>
    <url xmlns="http://xmlns.oracle.com/bpel/workflow/task"/>
    Regards,
    Raghav.

  • OIM Approval Workflow Scenario/Question

    Hello,
    Can anybody please explain how the approval workflow actually works in OIM?
    Scenario - After a user does self registration using the web console - how can we specify tasks in between that workflow - so that the user's manager should receive/approve the request first and then suppose then the request goes to some Department Head for his approval and then only the user will receive and confirmation email for logging into OIM.
    I understand the Provisioning workflow perfectly from OIM User Form to PRocess Form and from their to Target. But really want to understand this 'Approval/Self REgistration' workflow. Can anybody explain me with the steps that are needed to be configured in OIM Design Console for the 'scenario' explained above.
    Many Thanks!

    Hi,
    There is one possible solution for your requirement. I jsut the forget the name of the workflow which trigger while self registration.
    You can do one thing in that process add two task which assign task to manager and once he approved the request task will be assigned to deapartment head and once he approved the user will be created in OIM.
    Task will be assigned not as approval but as asisgned task, if its ok with you; just try this and let me know.
    Regards
    Alabhya Goel

  • OIM Approval Workflow

    Hi,
    I need to implement the following scenario in OIM.I have following 3 types of users in OIM . Employee,Organization Admin and Resource Admin.
    1.Organization Admin logs into OIM and request a resource to an user.While requesting,Organization admin needs to enter some information about the user (it could be either process form or resource form)
    2.Once the request is submitted,Resource Admin should see it in his pending task list.
    3.Resource admin approves the request and the user gets provisioned to the target system.
    I tried creating a process form,in which the admin can enter user details,but I am not sure how to attach approval workflow in that.
    When I tried using Resource Form,I am not able to populate user's information in the form.
    Any idea about how to implement this scenario?.Thanks in Advance.

    Hey Nitesh...
    Thanks for the Reply....
    Sorry i mistakenly put process form in place of object form. By default approver is only able to see only first name and last name in user details. What additional configuration i need to do so that approver can see the object form also for that user and then can approve/Reject. As the approver is from different organization so not able to view user details....but as per requirement have to show only the requested resource object form!
    Also i have couple of other questions which i am not able to crack....appreciate if you can help me to figure out the solution :)
    1. When i requested a resource for multiple users then approver is not able to approve it for few users and reject it for others under same request. Does OIM provide any kind of customization which can help me to achieve this.
    2. Once my user get provisioned in any resource lets say AD after that when i modified the user OIM profile and save it, it should modify the AD account also if the modified attribute is mapped in Resource form using prepopulate. Is this valid requirement?
    Edited by: user10781632 on Feb 26, 2009 5:35 AM

  • OIM approval workflow creation

    Hi Gurus,
    Is it possible to give permission to a group in the OIM to be able to create/manage Resource's approval workflow? If so, what I should do? Which permission are needed?
    Or just system administrator is able to do that?
    The group was created just to perform that activity and it can't have another privileges.
    I would appreciate any help.
    TiA,
    Carlos

    In pre 11g there is no really good way to do this as approval workflows are defined in the design console. One of the things I am excited about 11g is that the approval workflow is moved to BPEL (http://iamreflections.blogspot.com/2010/09/oim-11g-approval-workflow-orchestration.html)
    If you need to support this in pre 11g you can either try to configure the design console to just have the approval workflow menu item. i haven't tried that but it does not look simple or straightforward to me.
    If the approval workflows are simple you could try to go over the custom resource object or custom menu item road. A third option would perhaps be to let them define the workflows in a free standing tool and then parse in the changes and use the OIM API to update the approval workflows.
    Best regards
    /Martin

  • Default Approval workflow throwing error "Error occured"

    Hello,
    Default approval workflow throwing an error : Error Occurred, but no details shown.
    So could you please help me out, from where I can exactly get details to check error details/logs.
    Thanking you in advance.
    Regards,
    Jayashri

    Hi Jayashri,
    Since the issue is related to Default approval workflow, I wonder if you are using workflow based on 2010 platform or 2013 platform.
    If you are using SharePoint 2010 predefined workflows and encountered the "error occurred", please refer to:
    For predefined workflows, the workflow history list is a good troubleshooting tool. The workflow history displays the current state and all the previous states for a running workflow. When an error occurs in a workflow, the last event in the workflow history
    list is titled Error. The list provides information about when the error occurred, but the list typically does not provide a description of the problem to avoid revealing sensitive information that could lead to a security issue. The most common errors are
    caused by connectivity problems, incorrect e-mail settings, or restricted user permissions.
    https://technet.microsoft.com/en-in/library/cc298927%28v=office.14%29.aspx?f=255&MSPPError=-2147217396
    If you are using SharePoint 2013 workflow, you may refer to troubleshooting actions in the article:
    http://blogs.msdn.com/b/vincent_runge/archive/2014/01/07/troubleshooting-actions-for-sharepoint-2013-workflows.aspx
    Regards,
    Rebecca Tu
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • SOA Approval workflow trigger error

    I have created an SOA workflow for approval and used at operational level.
    I am getting the error IAM-2050014 : An error occurred while initiating approvals for request 61. The corresponding error message is Unable to instantiate the workflow process due to: weblogic.rjvm.PeerGoneException: No message was received for: '240' seconds.
    Any inputs on how to resolve the issue?

    A quick google search of "weblogic.rjvm.PeerGoneException" will return lots of other users with the same issues and what they did to resolve.  You should check them out and let us know how it goes.
    -Kevin

  • OIM 11g Workflow Execution Error

    Hi All,
    I have created a workflow and had registered into my env. Now while making a request, every time the request is failing stating the below mentioned error.
    IAM-2050014:An error occurred while initiating approvals for request oracle.iam.platform.workflowservice.exception.IAMWorkflowException: Unable to instantiate the workflow process due to null.
    I have 11.1.1.1.5 and used the same version of the JDeveloper.
    Thanking you all in advance.

    Can you be more specific?
    Like, how did you create the workflow?
    Have you followed the right documentation? The latest can be found here: http://download.oracle.com/docs/cd/E14571_01/doc.1111/e14309/workflow_service.htm

  • Defining Approver list in BPEL -OIM Approval Workflow

    Hi,
    We have a requirement where in we need to retrieve array of users from external resource (not integrated with OIM) and pass them as an approver list during resource provisioning request. As these users are not managed as a role in OIM, how do we achieve this functionality? We are retrieving these approvers as part of Java embedding in BPEL process, but not sure how to pass them as a approver list in BPEL -One of them can approve the request.
    Thanks in advance

    Thanks Kevin,
    So can I assign String DataType to the comma separated OIM Logins (approvers) and BPEL will take care of assigning them as approvers appropriately? If so, then will the request will be approved if one them approves it?
    Thanks again

  • Approval Workflow deploy in Jdeveloper - SOA Server not showing up in list

    Trying to deploy an OIM approval workflow. Added my weblogic server, and tried to deploy. When it comes to selecting a SOA server, no soa servers show up in the list. Any ideas? Thanks.

    For sca deploy are you need to specify few other properties; are you putting those correctly?
    <ant antfile="${oracle.home}/bin/ant-sca-deploy.xml">
        <property name="serverURL" value="?" />
        <property name="sarLocation" value="?" />
        <property name="overwrite" value="?" />
        <property name="user" value="?" />
        <property name="password" value="?" />
        <property name="partition" value="?" />
    </ant>HTH,
    BB

  • Without Approval Workflow in IDES version

    Hi,
    We care getting the below error while creating the Shopping cart by  activating without approval Workflow.
    Error:
    Approval workflow is ambiguous. Inform system administrator
    SWDD:What is the exact function of this T-code.
    By default a workflow was generated here ws999900001.Is this the reason
    Any idea how to delete the same.
    Thanks,
    Manu

    Hi Manu,
    As Disha advised, try to find out what are the workflows are activated in swe2 for bus2121 .
    you can deactivate the unnecessary workflow since you want without approval wf
    Cross-Application Basic Settings u2192 SAP Business Workflow u2192 Perform
    Task-Specific Cusomizing
    SAP u2192 SRM u2192 SRM-EBP u2192 SRM-EBP-WFL
    Activate event linking - Here you may get a list of workflow and deactivate them which you dont like or
    if you want more than workflow to be active , define starting condition which wf should be triggered depends upon your business scenario.
    regards
    Muthu

  • OIM 11g Approval Workflow - Error

    Hi All,
    I have created a approval workflow (Operational) in OIM11g. Have deployed it as a soa-composite and registered with OIM. Till here everything went fine.
    I have created an apporval policy, to assign to requests of a specific type of resource .
    When the resource is requested, the approval workflows is gettign triggered,but the request goes to failed state.
    I am getting any exceptions in the logs / on the console.
    Has anyone encountered this kind of issue.
    Vicky

    vicky wrote:
    Hi All,
    I have created a approval workflow (Operational) in OIM11g. Have deployed it as a soa-composite and registered with OIM. Till here everything went fine.
    I have created an apporval policy, to assign to requests of a specific type of resource .
    When the resource is requested, the approval workflows is gettign triggered,but the request goes to failed state.
    I am getting any exceptions in the logs / on the console.
    Has anyone encountered this kind of issue.
    VickyCheck your SOA server through the em and that should show you your request and the fault states and everything .. that should give you an idea on what is going wrong ...

  • OIM 11.1.1.5 Approval Workflow Issue

    Hi,
    I have installed OIM 11.1.1.5. While self-registration of a user, the request is created and by default assigned to xelsysadm as the request level approver.
    However, when the approver logs in, assigns the organization to the user and approves the request, it is shown that the approval task is completed.
    But the request status doesn't change and remains "Obtaining Request Approval" and thus the user is not created in OIM.
    In SOA server, on checking the logs (soa_server1-diagnostic.log) we found the following error -
    [soa_server1] [ERROR] [] [oracle.soa.bpel.engine.dispatch] [tid: orabpel.engine.pool-5.thread-4] [userId: weblogic] [ecid: ee9b8be672bf5ad0:-72f1c18e:1399f6dc058:-8000-0000000000000108,0:1:100000006] [APP: soa-infra] failed to handle message[[
    java.lang.NoSuchMethodError: oracle.wsm.policy.model.IPolicySet.getStatus()Loracle/wsm/policy/model/IPolicySet$POLICYSET_STATUS;
    We are unable to resolve the issue, we've tried using a custom approval workflow instead of the default approval workflow.
    Kindly help.
    Edited by: 957679 on Sep 7, 2012 6:17 AM
    Edited by: 957679 on Sep 7, 2012 6:19 AM

    Hi ,
    I actually faced the same issue some time back .., it took me almost a week to resolve it ..
    This is happening basically due to incompatible version of wsm-policy-core.jar on your server . Please check all the FMW s/f installed on your server . One of them is incompatible with OIM 11.1.1.5.0 .
    Are you using BIP 11.1.1.6 by any chance .
    Thanks
    Suren

  • Three State Approval Workflow Error

    I have created one Task List. Add Three state approval workflow to it.
    When i created New Task. It started workflow. But after couple of minutes it throws error "Error Occured". How to find error.
    Please let me know. If you know any resolution for workflow error then also let me know.
    Thanks in advance.

    Hi,
    Please go to the task list settings page, click Assigned to column and check "No" for "Allow multiple selections", then check whether the issue still exists or not.
    Here are two threads for your reference:
    http://social.msdn.microsoft.com/Forums/sharepoint/en-US/9231b505-7e78-4e98-b6c0-02ad85b247c3/error-occured-three-state-workflow-multiple-selection?forum=sharepointcustomizationlegacy
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/5a9f37ea-40b4-494b-b4af-db15be9d91ff/error-occured-three-state-workflow?forum=sharepointgenerallegacy
    Best Regards
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

Maybe you are looking for