OIM installation with Oracle db Standard Edition

The 11g version of OIM, OAM works with Oracle 11g db Enterprise Edition. Will these components work with Oracle db 11g Standard Edition ?
If this works then I am planning to use only for prototype purpose, where I can use a low end server.

Thanks Thiago,
Looks like the Enterprise Edition is required only for OAAM. rest of the components like OAM, OIM, OID and OVD will work with Standard Edition. Is my assumption correct ?
Thanks!
Kabi
Followings are the extract from the certification matrix.
+. The Oracle databases listed in this column are supported on all configurations (including RAC) and platforms that the database team supports. Check Certify for details.+
+. Oracle recommends using latest Oracle DB PSU's. For latest recommended patch information, refer to https://support.oracle.com/+
+. For OAAM, Oracle recommends Oracle Database Enterprise Edition for production deployments.+

Similar Messages

Forms 6i C/S with Oracle 10g Standard Edition

¿Somebody had installed Developer 6i C/S with Oracle 10g Standard Edition on Windows 2000, Windows 2003, Windows XP Professional?
¿What about the results?

I believe this particular combination (6i Forms with 10g database) is not actually supported, so is perhaps best avoided.
My own experience is that these forms run ok against a 10g database if compiled against a non-10g database, but if you try and compile the 6i form while connected to a 10g db, the results are unpredictable - forms which compile perfectly well against 9i fail against 10g, with all sorts of horrible looking internal error codes.
regards
Andrew
UK

Apex 3.1.2 installation on Oracle 10g Standard Edition (10gSE)

Hi..We're trying to install apex 3.1.2 on 10gSE (No application server 10gAS is available but just the database).
Can it be installed with the embedded plsql gateway (EPG) option?
or
Oracle HTTP Server mod_plsql option?
Currently there's Apache webserver already running on the box with PHP applications running. Want to make sure that apex/http-server install will not corrupt the existing environment.
Please provide any pointers/references. IF YOU CAN OFFER PHONE SUPPORT FOR 1-2 HOURS, YOUR TIME IS Sincerely APPRECIATED. PLEASE EMAIL: [email protected] For Direct contact. Also, I may need help to solve some apex screen issues.
* Removing the tagging with $ compensation on the post..Apex Community as in the past has been extremely helpful in solving many great apex challenges. Thanks for the continued support. *
Edited by: Shravanv on Feb 18, 2010 12:09 PM
Edited by: Shravanv on Feb 18, 2010 4:11 PM

1- Here is what I mean, the oracle website is showing Web Logic in the download page of oracle application server:
http://www.oracle.com/technology/software/products/ias/index.html
Is there a separate download link for Oracle Application Server, if it's different from the web logic server?
2- I Installed HTML_DB which is found in the Oracle 10g companion CD, I think I installed the HTTP Server with it, but now I want to install APEX 3.1.2 which I downloaded separately, if I uninstalled the HTML_DB using Oracle Universal Installer, will it remove the HTTP Server as well? since it lists the HTML_DB only as being installed without listing the HTTP Server separetly.
Thanks.

Database Web Services and OC4J in Oracle Database Standard Edition

Hi all,
Oracle Database Standard Edition has database web services, which require OC4J if the database is to be used as web service provider. So, can OC4J be used in production with Oracle Database Standard Edition?
Thank you for this clarification :)
Mitko

Yes. :)

What replication methods are available in Oracle 10g Standard Edition?

Hi All,
Our customer wants to have two identical servers at two different sites (Virginia and Utah). Server in Virginia will be the primary and the other one will be Standby. Application will run on the primary database and they would like to be able to use the Utah server (standby) in the event of a failure. The switch over can be manual or automated and does not have to be instantaneous.
I know these things can be in Enterprise Edition, but the cost is an issue here, so I was wondering what other methods are available to achieve this goal with Standard Edition database running on Windows Server 2008?
Thank you,
Sinan

Spajdy,
According to the Data Guard documentation:
Getting Started with Data Guard
"Oracle Data Guard is available only as a feature of Oracle Database Enterprise Edition. It is not available with Oracle Database Standard Edition."
Unfortunately, the cost is a concern. I would love to be able to use just the Enterprise Edition and Golden Gate or Data Guard, but it is not possible, so my manager says I have to do what I have to do with the Standard Edition.
Thanks,
Sinan

Primavera with Oracel 11g standard edition ( Connecting multiple databases)

I have installed primavera 8.2 with Oracle 11g standard edition. ( After lots of trial and errors )
I installed / Created two databases using primavera dbsetup.bat file for creating new database.
Data base names are PMDB and PMDB2
Currently i am using PMDB with oracle connection string as "ORCL" and database aliase as PMDB and its working fine
"C:\app\xxxxx\oradata\orcl" this location contains both databases physically
I seek your advice how to modify string to access other database ( PMDB1)
because if i have tried with different aliase name but it connect to same database ie PMDB

Is this P6 EPPM 8.2 or P6 PPM? Are you using P6 client or web to connect to it?
If this is P6EPPM then you can log into P6 Administrator and expand database node, create a duplicate node of it and change the database connection parameters. Save it and try to login using P6 Web. Select the correct database from Advance link below Username/Password.
If this is P6 PPM then define tns entries on your machine for both the databases ans use them to configure P6 client.
Sachin Gupta

Use Oracle BI Standard Edition One with multiple instances

Hi!
Our problem is that we have four resource instances (one for testing, and three with datas from different customers) and we do not know how to switch in Oracle BI Standard Edition One between them. For us it seems that is not possible.
Regards,
Balazs
Message was edited by:
user547076

BI SE one is restricted to one RDBMS data source.
2.2.1 Oracle BI Standard Edition One usage
You can install Oracle BI Standard Edition One on a machine with up to two CPUs, and it can serve from five to 50 users. Oracle Warehouse Builder can pull data from any source, but the target database is limited to the included Oracle Database. Oracle BI and Oracle BI Publisher data sources are limited to the included Oracle Database, exactly one other database, and as many flat file data sources (for example, spreadsheets) as you require.

Oracle BI Standard edition vs Enterprise Edition

Hi All, can someone kindly tell me the difference between Oracle BI standard edition and Oracle BI Enterprise edition,
On the website it says about Oracle BI Standard Edition that
Oracle Database 10g—an analysis-ready database with ETL, OLAP, and Data Mining built into the data server—and Oracle Business Intelligence Standard Edition (SE) allow you to rapidly develop and deploy data warehouses and data marts with an integrated array of query, reporting, analysis, desktop integration, and BI application development capabilities. so does that mean Standard edition has ready made reports that can be used in a standard installation.
Also
Where i found Oracle VM Template for Oracle Business Intelligence Enterprise Edition and not Oracle VM Template for Oracle Business Intelligence Standard Edition,
Is Oracle VM Template for Oracle Business Intelligence Standard Edition no yet released?
thanks in advance,

Hi,
Can anybody give me a short explaination about the differences between the Standard Edition and the Enterprise Edition. Is the standard edition a fully qualified development and production environment?
Regards,
Joshua The diff between SE and EE has to do with what you license. SE for example, is not licensed for REP and Parallel Server but that might not stop someone from implementing them ? I consider SE and EE to be 'fully qualified development and production environment' but that is just my opinion.
RP.

Oracle ILM Assistant 1.4 Installation for Oracle 11g Express Edition

Can we use Oracle ILM Assistant 1.4 with Oracle 11g Express Edition?
I installed ILM Assistant with Oracle 11g Express Edition along with default APEX in my laptop. Oracle SQLPlus connect and Application Express working fine. But facing problem is connecting ILM Assistant.
I used below commands to install ILM Assistant
sqlplus /nolog
Connect SYS as SYSDBA
Password: oracle
@ilma_install oracle ILM_ASSISTANT NONE
granted all access rights to user
@ilma_post_install
I restarted by computer once installation completes.
When I use http://localhost:8080/pls/apex/f?p=737677 address in IE to connect ILM Assistant it ask for XDB server username and password. When I provide default password IE giving 404 Not Found error.
Just wondering if I am missing something or issue is some thing else.

Hermann, thanks for your support.
Answer: please use username in Capital Letters
e.g.
SQL> @grant_privs ILM_USER_TEST;

P6 Professional 8.3 installation with Oracle Database

Hi All,
I had query about P6 professional installtion.
If i select Driver type "Microsoft SQL Server" system is allowing me to enter "Host Name" of database server.
But if i select Driver type "Oracle" it is not asking for Host Name of database server.
If my database is present on other server how to give server name here?

Hi,
This is down to a fundamental difference between SQL Server and Oracle.
SQL Server is pretty much always referenced with servername and database name (and the port number unless the \<instance name> is used as part of the server name)
Oracle uses more of an 'Alias' (TNS Names).
If you ever need to start working with Oracle DB Standard or Enterprise edition then you will soon learn to be configuring the tnsnames.ora file (which is where you will find the 'Alias' mapped to the server and database name).
Regards
Alex

Upgrading from Oracle 10G standard edition to Oracle 10G enterprise edition

Hi
I want to upgrade from Oracle 10G standard edition to Oracle 10G enterprise edition. Is there any script provided by oracle which I can run on existing Oracle 10G standard edition to upgrade to enterprise edition after completing the licensing formalities or do I need to install Oracle 10g Enterprise edition from scratch and then migrate my data.
Ramanbir S

You will not need to perform any data migration to upgrade to EE. The diffetence between standard en enerprise editions are the features offered. When you upgrade you can use the same set of files you used to install standard edition and just add the enterprise edition features you want to use in the 'Custom' section of the Universal Installer.

Primavera CM compatibility with Oracle 11g Express Edition

We are trying to install Primavera CM 13.1 application (on windows 7 32 bit) with oracle 11g express edition (on CentOS 5.4 64 bit). Installation is completed without any warning but while trying to log on in the system with expadmin, it shows Internal Server Error. Through dbconfigcm utility we can connect the database but while running the CMAdminConfig utility, it throws java exception in command line "Unable to parse XML String" with java pop-up warning node has no children.
Is it due to compatibility issue of Primavera CM 13.0/ 13.1 with oracle 11g express edition or something we are missing?
Regards,
Sandip

Thanks Jim for the quick response. From the link, I understand that TT integration will be available with an extra cost. I presume it is only with EE and not XE, correct? Technically, there is no TT support with XE, Is that a fair statement?
Thanks

Oracle DB Standard Edition One

Hello
I need to download Oracle DB Standard Edition One. From where can I download this version odf Oracle software?
Regards
Tim

Download 'Oracle Database'. Run installer and select 'Standard Edition'. Ensure you stay in the hardware limits defined in the Licensing doc (1 server, 2 CPU max) available at http://download-east.oracle.com/docs/cd/B19306_01/license.102/b14199/toc.htm

Oracle Database Standard Edition One's Cost

Dear all
I am very interest on the Oracle Database Standard Edition One, (US$149 per user (minimum five users)) includes the functionality and the cost (only US$ 149*5). However, I would like to know that is there any hidden cost for it? (e.g. maintaince fee etc.) Meanwhile, is there any backward compatible for the such license (i.e. I buy 10g version but use 8/8i version in production)
Anyone can has such experience and share for it?
Thanks in advance
Regards

There is generally a lot of confusion around Standard Editoin One. Here is my understanding, along with rationale and links supporting my understanding.
1) Standard Edition One was NOT part of Oracle8i, and NOT part of Oracle9i release 1.
Oracle's "Oracle9i Family of products" document, released shortly after 9iR1, does not mention SE1. http://www.oracle.com/technology/products/oracle9i/pdf/o9i_family_features.pdf
2) Standard Edition One MAY be part of Oracle9i Release 2 family, but it's not likely.
On metalink, there are a few 'forum' documents that discuss SE1 and Oracle9i. However, document #530049.994 from forum thread "Is Standard Edition One available in 9i/9ir2", dated 05-OCT-2004 says SE1 is a 10g new thing. (This post should be available in these forums.)
3) No-one purchasing a new license should be installing a fresh copy of Oracle8i and probably not Oracle9i
You purchase the license primarily to obtain (be able to purchase) support. Oracle8i is no longer under support (except through an exorbitantly priced extended support contract) and Oracle9i is abount to be mved to extended support. The question is ... why?
4) Personal Edition is NOT being replaced by SE1.
The Standard Edition One is a subset of Standard Edition - mainly missing RAC, so it is limited to one machine only. From the Oracle Database 10g Licensing document we note that the Personal Edition provides ALL FEATURES AND OPTIONS of the Enterprise Edition, except RAC.
It is fairly obvious from this that Personal Edition is targetted at developers who need metalink access, whereas Standard Edition One is targetted at workgroups that would consider using SQL Server STabdard/Workgroup Edition.

Upgrade Oracle 9i Standard Edition

Hi,
I have a requirement to migrate my Oracle 9i Standard Edition to Oracle 9i Enterprise Edition on Windows 2000 and on Linux
What is the best way for me to do this?
1.I was thinking of taking exports of all the user tablespaces.
2.De-installing oracle standard edition from the machines that have to be migrated.
3. Install Oracle 9i Enterprise Edition.
4. Import the user tablespaces again.
The amount of data that is to be exported and reimported is about 100 MB. very small amount.
I was wondering if there is a better way to do the migration- perhaps run a migration wizard (but the universal installer did not contain any such thing)
Would the steps that I have outlined work? Or are there any gotchas that I need to look out for?
Many thanks for any posts in this regard.

Hi,
Hi, Is there any cost involved to upgrade Oracle 9i standard edition to 11g? The license was purchased in 2004.
As updated by Jim you need pay all these missed years since 2004.
I recommend you to take new license for 11g that will save huge amount.
thanks,
X A H E E R

OIM installation with Oracle db Standard Edition

Similar Messages

Maybe you are looking for