OIM integration with EBS

Integrating OIM 9102 with EBS 12.0.6 and using User Management with HR Foundation Connector.
while provisioning provided some dummy employee number for employee number and its giving the error and
mentioned some default values for Business group id and person type id in Lookup.Lookup.EBS.UMHRMS.Configuration like 212 and 13 its throwing error
DEBUG,20 May 2010 18:11:30,315,[OIMCP.EBSUM],oracle.iam.connectors.ebs.usermgmt.integration.EBSUserManagementHelper : setProcParamsWithFormData:: FINISHED
DEBUG,20 May 2010 18:11:30,430,[OIMCP.EBSUM],oracle.iam.connectors.ebs.usermgmt.integration.EBSUserManagementHelper : createEBSEmployee : Callable Statement return value : 1
DEBUG,20 May 2010 18:11:30,430,[OIMCP.EBSUM],oracle.iam.connectors.ebs.usermgmt.integration.EBSUserManagementHelper : createEBSEmployee : Person ID : 0
DEBUG,20 May 2010 18:11:30,430,[OIMCP.EBSUM],oracle.iam.connectors.ebs.usermgmt.integration.EBSUserManagementHelper : createEBSEmployee:: FINISHED
INFO,20 May 2010 18:11:30,430,[OIMCP.EBSUM],oracle.iam.connectors.ebs.usermgmt.integration.EBSUserManagement : createEmployee : Person ID returned after creating a person is invalid. Person ID = 0
DEBUG,20 May 2010 18:11:30,430,[OIMCP.EBSUM],oracle.iam.connectors.ebs.usermgmt.integration.EBSUserManagement : createEmployee : Create employee result: ERROR
DEBUG,20 May 2010 18:11:30,430,[OIMCP.EBSUM],oracle.iam.connectors.ebs.usermgmt.integration.EBSUserManagement : createEmployee:: FINISHED
DEBUG,20 May 2010 18:11:30,430,[OIMCP.EBSUM],oracle.iam.connectors.ebs.usermgmt.integration.EBSUserManagement : createUserHRF : Result of createEmployee : ERROR
DEBUG,20 May 2010 18:11:30,430,[OIMCP.EBSUM],oracle.iam.connectors.ebs.usermgmt.integration.EBSUserManagement : createUserHRF : Status = ERROR

Hi!
How did you solve the error? We're facing the same one.
Have no idea what are we doing wrong

Similar Messages

OID Installation Questions pertaining to integration with EBS 11.5.10.2

Our Environment is E-Business Suite 11.5.10.2 and we want to investigate/view OID/SSO in action. Ultimately, we'll attempt to use Microsoft Active Directory as the source (of truth). I had performed OID/SSO integration with EBS about 3 years ago and remember the "overall" scheme, but Oracle's documentation/downloads page has left me thoroughly confused, hence, I am asking those that have been through the process .... THANKS IN ADVANCE
(1) Do I need to install the base AS 10g Infrastructure and Metadata Repository via 10.1.2.0.2 installation or can I go directly to installing OID 10.1.4.0.1 ??
Here is what I believe the steps to be, PLEASE, correct me if I am wrong ...
(1) Install 10.1.2.0.2 Application Server Infrastructure by selecting "Infrastructure and Metadata Repository"
(2) Install 10.1.4.0.1 and select to upgrade an existing 10.1.2.0.2 installation. Once 10.1.4.0.1 has upgraded everything, including the database to 10.1.0.5, I assume that I can simply remove 10.1.2.0.2 through the Oracle Installer. Is this correct ??
(3) Once upgrade to 10.1.4.0.1, I believe that I need to download a Metadata Upgrade Assistant patch, (mrua), and run mrua,sh to upgrade MR to 10.1.4.0.1 which will be apparent by querying app_registry view.
(4) Upgrade 10.1.4.0.1 to 10.1.4.3
The documentation is confusing and hard to find for me. Do these steps seem to accomplish the tasks or am I missing something ??
THANKS IN ADVANCE

I didn't do the install myself but we went straight to installing 10.1.4 Identity Manangement, although I believe that Infrastructure components which underly it are essentially the same as 10.1.2. As far as I know you can't use 10.1.3 because it lacks those infrastucture components.
See MOS Doc 233436.1

APEX integration with EBS R12.1.1 - no SSO

I am trying to complete APEX integration with EBS R12.1.1 in simplest way. I have a non authenticated report page that I need to link to through a menu and function on one of the existing forms.
Rod West document
http://www.oracle.com/technetwork/developer-tools/apex/apex-ebs-wp-cabot-consulting-169064.pdf
offers the jsp approach which I like to implement however the jsp will not compile correctly and I am not sure why - I have already fond one error with the code as listed in the document:
ojspCompile.pl compile -s 'LaunchApex.jsp ' retry ---> will not work
ojspCompile.pl compile -s 'LaunchApex.jsp' retry --> will work
compile will fail starting at this point of the code:
PARALLEL COMPILATION: 1
[10389] !!COMPILATION ERROR(0) LaunchApex.jsp:
_LaunchApex.java:70: illegal start of type
if (ctx==null) {
^
has anyone tried this approach and got the jsp to compile with no errors or can you see what is it?
thanks in advance.

Hello Mini:
thanks for the info and I have followed the steps as listed. I am not sure what line is the bad code you listed is on - here is the copy of the jsp I am working with and maybe you can point to a specfic line(s) that need to be changed from what to what.
<%@ page contentType="text/html;charset=UTF-8" %><%--
/* LaunchApex.jsp */
--%><%@ page
import="java.io.*"
import="java.net.*"
import="java.sql.*"
import="javax.servlet.http.*"
import="java.util.Enumeration"
import="java.util.Properties"
import="java.lang.Math"
import="oracle.apps.fnd.common.VersionInfo"
import="oracle.apps.fnd.functionSecurity.Function"
import="oracle.apps.fnd.functionSecurity.RunFunction"
import="oracle.apps.fnd.common.WebAppsContext"
import="oracle.apps.fnd.common.AppsEnvironmentStore"
import="oracle.apps.fnd.common.WebRequestUtil"
import="oracle.apps.fnd.common.ResourceStore"
import="oracle.apps.fnd.security.CSS"
import="oracle.apps.fnd.common.Message"
import="oracle.jdbc.OracleConnection"
import="oracle.jdbc.OraclePreparedStatement"
import="oracle.jdbc.OracleResultSet" %><%!
// Session has to be validated first
WebAppsContext ctx = WebRequestUtil.validateContext(request, response);
if (ctx==null) {
return; }
String cookieName = ctx.getSessionCookieName();
boolean validSession = ctx.validateSession(cookieName);
WebRequestUtil.setClientEncoding(response, ctx);
%>
<html>
<head>
<title>Launch Apex</title>

</head>
<body>
<%
     String p_application = request.getParameter("application");
     p_application = ( p_application==null ? "NONE" : p_application);
     String p_page = request.getParameter("page");
     p_page = ( p_page==null ? "1" : p_page);
     String p_item_names = request.getParameter("item_names");
     p_item_names = ( p_item_names==null ? "" : p_item_names);
     String p_item_values = request.getParameter("item_values");
     p_item_values = ( p_item_values==null ? "" : p_item_values);
     AppsEnvironmentStore m_env = (AppsEnvironmentStore) ctx.getEnvStore();
     try {
          String l_launcher = ctx.getProfileStore().getProfile("APEX_HTTP_SERVER");
          l_launcher = l_launcher + "/pls/apex/f?p=" + p_application + ":" + p_page;
          l_launcher = l_launcher + "::APPS:::" + p_item_names + ":" + p_item_values;
     if (ctx!=null) ctx.freeWebAppsContext();
     response.sendRedirect(l_launcher);
     } //try
     catch (Exception e) {
     out.println("Exception found : <pre>");
     e.printStackTrace(new PrintWriter(out));
     out.println("</pre>");
     } //catch
%>
</body>
</html>
*********

OBIEE Installation doc's and integration with EBS 12.0.6.

HI,
I had installed OAS 10g with OSS and OID and integration with EBS R12.0.6.
Now I want to install OBIEE(On Linux) and wants to iuntegrate with SSO.
Please provide me the Master Doc for this and anyother private doc also if any.
thx

Hi,
Check this might be helpful... http://gerardnico.com/wiki/dat/obiee/linux_installation
http://onlineappsdba.com/index.php/2007/10/29/biee-installation-on-linux-business-intelligence-enterprise-edition/
To integrate with EBS check these.....http://it.toolbox.com/blogs/eye-on-obi/oracle-bi-applications-obiee-security-integration-with-oracle-ebusiness-suite-17246
http://obibb.wordpress.com/2010/07/30/integrating-oracle-ebs-and-oracle-bi-ee-part-i/
Thanks,
Srikanth

Do we have OBIEE integrated with EBS

Hi Experts,
Do we have OBIEE integrated with EBS or we have to do it manullly..do we have any docs.
Please suggest..
S

Hi,
Never i have done this but i can show you the path.
[http://it.toolbox.com/blogs/eye-on-obi/oracle-bi-applications-obiee-security-integration-with-oracle-ebusiness-suite-17246]
OBIEE Integration with EBS 11.5.10 or R12 Apps
By,
Kranthi.

Discoverer integration with EBS R12 !!!

Hello Sir,
I need help to install/integrate Discoverer with R12.
Actually, our clients are using Discoverer 4i in current EBS 11.5.10.2 in production. We have just upgraded EBS in TEST environment from 11.5.10.2 to R12.1.3.
I had suggested client that Discoverer 4i is actually de-supported and they need to upgrade Discoverer version to minimum 10.1.2.3 or higher to integrate it with R12.1.3.
Now, client also have requirement for Discoverer to be certified with MS Excel 2010 format. So I have suggested to upgrade Discoverer version to minimum 11.1.1.4.
Latest certified Discoverer version is 11.1.1.7.0 as per note Using Discoverer 11.1.1 with Oracle E-Business Suite Release 12 (Doc ID 1074326.1)
1) Can you please provide your opinion and any documentation which I can follow to install/integrate Discoverer with R12 ?
2) Do I need to first install separate 10gAS for installing Discoverer 10.1.2.3 or Fusion middleware home for installing Discoverer 11g ? If yes, where can I find doc for this installation ?
3) Since 10g support has ended July 2013, where can I get media for installing 10gAS ?
4) Is there any additional licences required for using either Discoverer 10g or Discoverer 11g ?

1) Can you please provide your opinion and any documentation which I can follow to install/integrate Discoverer with R12 ?
In addition to the doc you have, please see:
https://blogs.oracle.com/stevenChan/entry/discoverer_11_1_1_7
How to Test Discoverer Integration with E-Business Suite 11i and Release 12? (Doc ID 1065257.1)
Running Discoverer Reports From EBS R12 (Doc ID 1516784.1)
R12: How to Create a Link to a Discoverer Workbook (Doc ID 471303.1)
2) Do I need to first install separate 10gAS for installing Discoverer 10.1.2.3 or Fusion middleware home for installing Discoverer 11g ? If yes, where can I find doc for this installation ?
Installation Recommendations - 11g Release 1 (11.1.1)
Installer Screens - 11g Release 1 (11.1.1.7.0)
3) Since 10g support has ended July 2013, where can I get media for installing 10gAS ?
You can download WebLogic 10.3.6 from WebLogic Server 12c (12.1.1), WebLogic Server 11g (10.3.6) and Previous Releases
4) Is there any additional licences required for using either Discoverer 10g or Discoverer 11g ?
Please see Steven Chan's reply in this link -- https://blogs.oracle.com/stevenChan/entry/discoverer_11gr1_primer
Thanks,
Hussein

OIM Integration with Active Directory Federation Services (ADFS)

Hello friends
I have a question about the integration of Oracle Identity Manager with Active Directory which is federated with another external directory for ADFS. My question is:
What considerations should be to contemplate if I have an active directory federated environment when carrying out the integration with Identity Manager?
I use version 9.1.0.2 of Oracle Identity Manager with Microsoft Active Directory Connector User Management 9.1.1.7
Thanks for the support.

First consideration is that the OIM's target ADFS - in the federated scenario, will that participate as a Service provider or identity provider. I would think identity provider.
Next consideration: What all attributes are required to be played in the SAML assertion to the other end-point? All these attributes must be present and should be provisioned to the AD in this case.
So, OIM should be set up (UDF etc) to provision all those attributes needed in the SAML.
Next consideration: What all scenario to support? IdP initiated or SP initiated? If SP initiated, then process will hv to be defined if a user id does not exist in the AD of the OIM target. Will the request be failed or a in-time provisioning should happen.
Hope this helps.

OIM integration with MS CRM

Guys,
Anybody has ever done the MS CRM integration with OIM.
MY requirement is as follows
User initiates a self service request for the application and may populate some fields like country or primary service line (fields yet to be determined, but assuming the values for each field will be maintained in a lookup field)
First Approval Step: User’s Manager must complete any missing required attributes that the user didn’t fill and must also populate the access level field (values will be something like local, country, regional or global), but again these will be pulled from a lookup field. Manager provides first level approval
Second Approval Step: The owner approves/rejects the approval
Provision the user to the application (notification sent to the user), also, provision user to AD group for the application
Edited by: a73210 on Oct 28, 2009 10:42 PM

I don have exp with MS CRM but if you have APIs then you can buid your custom connector. And for other things of your requirement.
Just create an Object form with the fields as per ur requirement and use pre populate adapter to populate these fields.
While creating form fields go to Properties tab and select property Required = true for required fields.
And you can make fields mandatory while creating the form so OIM will validate automatically that whether required fields are filled or not.
Create an Approval Process.
Create two task Approval1 and Approval2 and assign both the tasks to two different approvers.
Go to Approval1 > Responses
Select Approve and below in Task to Generate select Approval2.
You are done with 2nd level of approval.

OBIEE 11G authentication integration with EBS 11 - is it possible?

Hi experts,
My OBIEE 11.1.1.5 is installed on Linux 64 bit machine.
I've thoroughly performed all the action listed in the guide, but I'm getting the famous 'You are not logged in' message.
Has anybody succeeded to enable security integration between OBIEE 11 and EBS 11?
Thanks in advance,
Alex

Hi Deva,
Thanks for your reply.
I've heard from some people that there's a bug in OBIEE 11.1.1.5 that prevents integration of OBIEE 11 security with EBS 11.
I'm trying to find anyone who actually succeeded to get the thing done.
I used the DeliverBI document as well as the official guide.
Is there any way to "debug" my settings? How can I know - what's wrong?
Thanks,
Alex

Apex Integration with EBS R12 - javax.servlet.ServletException

Morning,
We are in the process of upgrading from 11i to R12 and we have found that our method of launching Apex in 11i no longer works in R12. We are trying to follow the following instructions: http://www.oracle.com/technetwork/developer-tools/apex/apex-ebs-wp-cabot-consulting-169064.pdf and have created a .jsp file and compiled as per the document. When we try to launch the function from apps though we get:
An exception occured.
URL=XXX/OA_HTML/XXFND_LaunchApex.jsp?transactionid=1236782452&language_code=US&CallFromForm='Y'&p_application=112&p_page=101&oas=DScF2XdCwRRnxFePUKHOnQ..
javax.servlet.ServletException: oracle.classloader.util.AnnotatedClassNotFoundException:
       Missing class: _XXFND__LaunchApex
     Dependent class: oracle.jsp.runtimev2.JspPageInfo
              Loader: oc4j:10.1.3
         Code-Source: XXX/apps/tech_st/10.1.3/j2ee/home/lib/ojsp.jar
       Configuration: in META-INF/boot.xml in XXX/apps/tech_st/10.1.3/j2ee/home/oc4j.jar
This load was initiated at oacore.web.html.jsp1603821464:0.0.0 using the loadClass() method.
The missing class is not available from any code-source or loader in the system.I've XXX'ed out our domain. Has anyone else has this, or can anyone who has successfully integrated apex with EBS R12 let me know what they did?
Thanks

Hi,
If the jsp compiled successfully then you may need to bounce your web server before the jsp can be used. See MOS Note 458338.1 for more details.
Actually, now that Oracle have updated their FND Gateway for Apex integration there are only a few situations (such as if you want to pass parameters from the form function to Apex) where you need to use a custom jsp to launch Apex. In most cases you can use the Oracle supplied GWY.jsp to launch your Apex Page. To use this jsp you must apply the EBS R12 patch 12316083 (and patch 12726556 if you are launching from the forms navigator). How to use the GWY.jsp is described in "Extending Oracle E-Business Suite Release 12 using Oracle Application Express" white paper.
Rod West

OFR integration with EBS and UCM

Hi All,
We are implementing the following modules from Oracle Content Management to one of our Client, the following are the configurations we need :
Configure and deploy Oracle Forms Recognition (OFR) 10GR3
Configure the Oracle Adopter for integration of OFR with EBS
Configure the Adopter for integration of OFR with Oracle UCM content server
I really like to have any technical design document on integrations front, especially from OFR -> EBS, OFR -> UCM and also UCM -> EBS.
Any pointers for the same is well appreciated.
Regards,
Radhika

Hi All,
We are implementing the following modules from Oracle Content Management to one of our Client, the following are the configurations we need :
Configure and deploy Oracle Forms Recognition (OFR) 10GR3
Configure the Oracle Adopter for integration of OFR with EBS
Configure the Adopter for integration of OFR with Oracle UCM content server
I really like to have any technical design document on integrations front, especially from OFR -> EBS, OFR -> UCM and also UCM -> EBS.
Any pointers for the same is well appreciated.
Regards,
Radhika

OIM integration with Blaze Advisor

Here we are integrating Oracle Identity Manager with Fair Isaac Blaze Advisor.
Any document which talk about Blaze Advisor integration with Oracle Identity manager would be really helpful

Funny, I never thought I would see those two products together! I've been meaning to write a blog about our experience with OIM and JBoss Drools but I haven't gotten around to it (stay tuned) What are you trying to do with Blaze?
--deb (OIM AND Blaze Advisor expert)

User authentication when OBIEE is integrated with EBS

Hello guys
I have a conceptual question about how OBIEE authentication is performed in an integrated environment with EBS? If the goal is to have users access to OBIEE based on their roles given in EBS, what kind of authentication is it needed for such implementation?
Do I import users and group from EBS database or LDAP server (if its available)? what kind of session variable and ini block is created if I want to do data level secuirty based on user groups?
Please give some basic idea and guidelines on topic
Thank you very much

hi,
the final solution must face and fill your needs....
Bi suite has 3 ways of making-having user-groups...
1.manual
2.ldap
3.from external database
If the goal is to have users access to OBIEE based on their roles given in EBS, what kind of authentication is it needed for such implementation?
-->match the roles from EBS to your liked in OBIEE
check and this,
http://it.toolbox.com/blogs/eye-on-obi/oracle-bi-applications-obiee-security-integration-with-oracle-ebusiness-suite-17246
hope i helped....
http://greekoraclebi.blogspot.com/
///////////////////////////////////////

Help needed in Apex Integration with EBS

Hi All,
Currently, when trying to integrate with EBS these are the steps I followed.
1) Created apex generate hash and apex launch procedure in APPS DB.
2) Created Profile in Application Developer Responsibility.
3) Saved above profile in system administrator -->Profile -> System and set the site level as http://<hostname>:<Apex port>/pls/apex
4) Created a function in system administrator , type as SSWA plsql function and called the launch procedure and passed parameters as my apex application and page id.
5) Created a Web PL/SQL entry under System Administrator Responsibility -> Security -> Web PL/SQL for the launch procedure.
6) Created menu, responsibility and assigned to the user.
For the APEX application , currently I have not given any login page. The login is through EBS only. I have given logout URL in apex application to EBS Login page. Now my problem is , when I click Logout the session of EBS does not get invalidated. How can I achieve this ?
Secondly, When I give the APEX application URL directly in the browser it will open without asking for the EBS login credential. But I do not want this to happen. I need it to be authenticated through EBS login credential.
Any suggestions would be welcome.
Thanks
Alaka

Hi Scott,
I tried the solution given in this URL.
http://oracledbas.blogspot.com/2008/11/oracle-application-express.html
It is not working for me.. I tried in the forum also.
While creating authentication scheme I gave Oracle EBS Login Page as Session Not Valid URL. But every time I login to EBS and click responsibility then menu which has APEX screen, it is not validating username and password and it redirects to EBS login page which i gave in "session not valid URL" (it is going to a loop.)
Now my problem is when I login to EBS and click responsibility then my APEX screen should validate the EBS login and directly it should open. It should not ask for any other (APEX login)login page. If I paste the APEX application URL in any browser it should ask for EBS login page.
When I logout it should invalidate the session of EBS.
Thanks
Alaka

OBIA 7.9.6.3 security integration with EBS R12.1.2

Hi Experts,
We are implementing OBI Apps 7.9.6.3 with EBS R12.1.2 as source.We need to integrate Active Directory with OBIEE and implement security of BI Apps with EBS R12.1.2. Need help on this.
How to map EBS Responsibilities into Application Role and Groups? Whether we need to create one Application Role and Group for each responsibility ? Then provide permissions in rpd for each of them? The user should have similar permission in BI as they have in EBS - like people can see only US Finance data in EBS should see only US Finance data in BI also.
Regards,
mvsst

You can go through obia security guide which explains step by step procedure with screenshot on how to implement ebs authentication and role based access.
here is the link.
http://docs.oracle.com/cd/E21043_01/bi.1111/e16364/ebs_actions.htm
Regards,
RAM
Edited by: RAM CH on May 20, 2012 1:34 PM

OIM integration with EBS

Similar Messages

Maybe you are looking for