OIM multiple server installation steps doc

Hi All,
I have installed OIM 9.1.0 with jboss 4.0.3 SP1 its working fine. Now I want to install OIM in multiple servers. If any one having step-by-step document for installing OIM in multiple server please share me the step Or any doc.
Thanks in advance.
Sincerely
vyas

You can setup database clusters (RAC). You can setup a cluster for the application server. You can deploy just the xlWebApp (front end) to servers, and have the xlScheduler on others. You can also host the JMS servers on different nodes of the cluster.
OIM is not Novell, so it will work different. See the clustering documentation with the JBOSS documentation.
-Kevin

Similar Messages

Multiple server installation

dears,
i have installed the ocs r2 infrastractr on linux server and i want to installe the storage tier on windows server.
the installation on infrastructer went fine i am able to log 1810, 7777, 7779 ports and to oiddas. when i started the installation of storage on windowse server on the screen the it asks about OID host, port usersname=cn=orcladmin password, it takes a long time and then it gives me " unable to verfiy conniction to this OID instance, verfiy ur host, port, user name, pass or verify the oid serverc is running" i am sure of all what it says but dont know what the error that was when i chose to regester the inforamtion storage with the database when i chose no it gives me the database identification scree. should i regester or not regester or can any one plz tell me how to install the storage tier on other server

test

Afaria Server Installation Steps

Hello ,
I have downloaded few files from SAP Service market place , but dont know what are the steps need to take care for Proper and smooth installation .
Files information are below :
1) 51042956.zip
2) Afaria70001_0-21010386.zip
3) Afaria70002_0-21010386.zip
4) Afaria70003_0-21010386.zip
5) Afaria70004_0-21010386.zip
Can you please provide me info to install above files ?
and also if its possible then provide me some links then i can refer .
Thanks & Regards ,
Kunal Varaiya

You can also find installation guides in service market place
Login to ServiceMarketPlace--> softwares and downloads-->Installation and Upgrades--> Installation and Upgrade GUides -->SAP Mobile --> Afaria --> choose the service pack you downloaded --> here you can find the installation guides
This might also help you --> check in Setting up Afaria Environment Column from below document
Afaria - Architect & Admin
How-To Guide: Afaria Technical Prerequisites for iOS, Android and Blackberry

WEBLOGIC 700 server Installation step

hello sir please give me steps to install weblogic 700 server

hello sir please give me steps to install weblogic 700 server

Issue with multiple application installation and server share

Hi,
SCCM 2007 SP2 R3 ICP2
All servers W2K8R2
I am having an issue with software installs. When using a variable for multiple applciation installs, I get access errors when the applications go to install. It appears to be a multiple connection issue, but I can't figure out why.
I am using server shares for my DPs. The proper permissions are set. The servers (DP) are W2K8R2. I think it has to do with the way R2 handles the conenctions. I want to know if this is a known issue or if anyone has come accross
it.
I am going to post in the software distribution forum as well, but thought this would be a config question.

Hi! I'm waking up this dead thread but I've got a *very* similar problem!
I've got a SCCM 2007 SP2 R3 installation on Win2008. All clients are in the same ConfigMgr-site. Multiple package deploy in the same site-boundary as the CM-server works excellent. (We've got three DPs in the same site-boundary as the
CM-server itself.)
Now, we have a new site-boundary with it's own Protected DP where multiple package deploy fails
but the same packages, being run from the task-sequnce works! So then the client can download, install and run the packages from the proteced DP just fine. All "single" packages install fine before the "Multiple Appliaction"-step.
I've tripple checked that we're running the same packages when we're installing Multiple Packages as we do in the Task-Sequence. And
the same Task-sequence with the Multiple Package installation step
works fine in our site-boundary where the ConfigMgr-server is installed.
Here's the log from a client trying to access and install one of three packages through the the Install Multiple Packages task-sequence step.
<![LOG[Policy SMS10000-CEN000BD-25FE0E9B downloaded successfully]LOG]!><time="16:01:20.905+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="dsutils.cpp:597"> <![LOG[SMS PackageID = CEN000BD]LOG]!><time="16:01:20.905+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="dsutils.cpp:247"> <![LOG[Source version = 2]LOG]!><time="16:01:20.905+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="dsutils.cpp:296"> <![LOG[SMS Program Name = RESTORE]LOG]!><time="16:01:20.905+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="dsutils.cpp:317"> <![LOG[::CompressBuffer(65536,-1)]LOG]!><time="16:01:20.905+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="ccmzlib.cpp:695"> <![LOG[Compression (zlib) succeeded: original size 26608, compressed size 3254.]LOG]!><time="16:01:20.905+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="ccmzlib.cpp:484"> <![LOG[Policy for CEN000BD:"RESTORE" successfully stored in environment]LOG]!><time="16:01:20.905+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="dsutils.cpp:331"> <![LOG[Downloaded policies successfully]LOG]!><time="16:01:20.905+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="dsutils.cpp:725"> <![LOG[Installing pkg 'CEN000BD', program 'BACKUP']LOG]!><time="16:01:20.921+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="dsinstaller.cpp:290"> <![LOG[Resolving content for SMS Package CEN000BD]LOG]!><time="16:01:20.921+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="dsutils.cpp:768"> <![LOG[Getting local network information.]LOG]!><time="16:01:20.921+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="resolvesource.cpp:1846"> <![LOG[GetAdaptersAddressess entry point is supported.]LOG]!><time="16:01:20.921+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="ccmiputil.cpp:118"> <![LOG[DhcpGetOriginalSubnetMask entry point is supported.]LOG]!><time="16:01:20.937+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="ccmiputil.cpp:181"> <![LOG[Adapter {B3FC51BA-75F3-4C93-98D3-72ECE4B7A6A2} is DHCP enabled. Checking quarantine status.]LOG]!><time="16:01:21.124+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="ccmiputil.cpp:509"> <![LOG[Adapter {B3FC51BA-75F3-4C93-98D3-72ECE4B7A6A2} has 1 IPv4 address(es).]LOG]!><time="16:01:21.124+-60" date="12-12-2011" component="InstallSoftware" context="" type="2" thread="3040" file="ccmiputil.cpp:540"> <![LOG[Executing content location request for CEN000BD:2 as GUID:87F78866-5FCB-43FE-A2F7-07DA7F6863DF]LOG]!><time="16:01:21.124+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="resolvesource.cpp:1852"> <![LOG[Initializing CLibSMSMessageHeader with authenticator]LOG]!><time="16:01:21.295+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="libsmsmessaging.cpp:1103"> <![LOG[Sending RequestContentLocations]LOG]!><time="16:01:21.295+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="libsmsmessaging.cpp:3367"> <![LOG[Messaging Auth Using V4 Mode]LOG]!><time="16:01:21.295+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="libsmsmessaging.cpp:1400"> <![LOG[Formatted header:]LOG]!><time="16:01:21.295+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="libsmsmessaging.cpp:1500"> <![LOG[<Msg SchemaVersion="1.1" ReplyCompression="zlib"><ID/><SourceID>GUID:87F78866-5FCB-43FE-A2F7-07DA7F6863DF</SourceID><SourceHost/><TargetAddress>mp:[http]MP_LocationManager</TargetAddress><ReplyTo>direct:OSD</ReplyTo><Priority>3</Priority><Timeout>3600</Timeout><SentTime>2011-12-12T15:01:21Z</SentTime><Protocol>http</Protocol><Body Type="ByteRange" Offset="0" Length="618"/><Hooks><Hook2 Name="clientauth"><Property Name="Token"><![CDATA[CCMClientID: BBA60FFE-10D3-42AA-88BF-CBAC68CA4BB4 CCMClientIDSignature: 3F5C9150307B32713AB75C2BD3431AFCB0816854881F6450868D120ABA7FC4424EF3407E6BD2531E32EBF4A89D92440D3BD9E68078A8BB5B899905A765C4AC28B1D837A0D58EB02C55048B1BA97BF0319B02276D87846F4748C2FBAA887C8921989CB07E15BD6685BFC84792B1C9E91EE140DA03BA01FBBF7F6EF824F5FFAF15 CCMClientTimestamp: 2011-12-12T22:02:17Z CCMClientTimestampSignature: 4E28E6E6EEF71EB4A6FDE54155100F67610556C0E5F81DF82B6AB03608C1745485D65AB09F195D384903AB60DD9993118FCECCC3C9E85F5A9C0CB6E949A5F8DF305B7A5E64E0D98973AF12E034E468B6E7CC03FE23DC3DEB686CBA63FADD895F61D7034504C018F6F20561F40B47BC20509423C2385032A3AA6866F266409F1E]]></Property></Hook2></Hooks><Payload Type="inline"/><TargetHost/><TargetEndpoint>MP_LocationManager</TargetEndpoint><ReplyMode>Sync</ReplyMode><CorrelationID/></Msg> ]LOG]!><time="16:01:21.295+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="libsmsmessaging.cpp:1501"> <![LOG[CLibSMSMessageWinHttpTransport::Send: URL: STOSCCM02.INTERNT.SVT.SE:443 CCM_POST /ccm_system_AltAuth/request]LOG]!><time="16:01:21.295+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="libsmsmessaging.cpp:7446"> <![LOG[In SSL, but with no client cert]LOG]!><time="16:01:21.295+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="libsmsmessaging.cpp:7596"> <![LOG[In SSL, but with no media cert]LOG]!><time="16:01:21.295+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="libsmsmessaging.cpp:7602"> <![LOG[The request has succeeded. 200 OK]LOG]!><time="16:01:21.342+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="libsmsmessaging.cpp:7734"> <![LOG[Decompressing reply body.]LOG]!><time="16:01:21.342+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="libsmsmessaging.cpp:2395"> <![LOG[::DecompressBuffer(65536)]LOG]!><time="16:01:21.342+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="ccmzlib.cpp:735"> <![LOG[Filtering Content Locations.]LOG]!><time="16:01:21.342+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="resolvesource.cpp:1883"><![LOG[Decompression (zlib) succeeded: original size 522, uncompressed size 2128.]LOG]!><time="16:01:21.342+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="ccmzlib.cpp:646"><![LOG[ Adding \\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000BD\ to Local DP list.]LOG]!><time="16:01:21.342+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="resolvesource.cpp:1938">
 <![LOG[Found 0 DPs in subnet, 1 DPs in local site, 0 DPs in remote location and 0 Multicast DPs]LOG]!><time="16:01:21.389+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="resolvesource.cpp:1974">
<![LOG[Shuffling HTTP local DP list.]LOG]!><time="16:01:21.389+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="resolvesource.cpp:2012">
<![LOG[Shuffling Local DP list.]LOG]!><time="16:01:21.389+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="resolvesource.cpp:2087">
<![LOG[Attempting to connect to \\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000BD\]LOG]!><time="16:01:21.389+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="resolvesource.cpp:2151">
<![LOG[Deleting any existing network connections to "\\vaxcmdp01.domain.com\*".]LOG]!><time="16:01:21.389+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="tsconnection.cpp:407">
<![LOG[Attempting to connect to "\\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000BD".]LOG]!><time="16:01:21.389+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="tsconnection.cpp:501">
<![LOG[Retrying download...]LOG]!><time="16:01:34.974+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="tsconnection.cpp:508">
<![LOG[Attempting to connect to "\\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000BD".]LOG]!><time="16:01:37.985+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="tsconnection.cpp:501">
<![LOG[Retrying download...]LOG]!><time="16:01:42.711+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="tsconnection.cpp:508">
<![LOG[Attempting to connect to "\\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000BD".]LOG]!><time="16:01:45.721+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="tsconnection.cpp:501">
<![LOG[Retrying download...]LOG]!><time="16:01:50.400+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="tsconnection.cpp:508">
<![LOG[Attempting to connect to "\\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000BD".]LOG]!><time="16:01:53.411+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="tsconnection.cpp:501">
<![LOG[Retrying download...]LOG]!><time="16:01:58.090+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="tsconnection.cpp:508">
<![LOG[Attempting to connect to "\\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000BD".]LOG]!><time="16:02:01.100+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="tsconnection.cpp:501">
<![LOG[Retrying download...]LOG]!><time="16:02:05.780+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="tsconnection.cpp:508">
<![LOG[Attempting to connect to "\\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000BD".]LOG]!><time="16:02:08.790+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="tsconnection.cpp:501">
<![LOG[Retrying download...]LOG]!><time="16:02:13.469+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="tsconnection.cpp:508">
<![LOG[Attempting to connect to "\\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000BD".]LOG]!><time="16:02:16.480+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="tsconnection.cpp:501">
<![LOG[Retrying download...]LOG]!><time="16:02:21.174+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="tsconnection.cpp:508">
<![LOG[Attempting to connect to "\\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000BD".]LOG]!><time="16:02:24.185+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="tsconnection.cpp:501">
<![LOG[Retrying download...]LOG]!><time="16:02:28.911+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="tsconnection.cpp:508">
<![LOG[Attempting to connect to "\\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000BD".]LOG]!><time="16:02:31.921+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="tsconnection.cpp:501">
<![LOG[Retrying download...]LOG]!><time="16:02:36.600+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="tsconnection.cpp:508">
<![LOG[Attempting to connect to "\\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000BD".]LOG]!><time="16:02:39.611+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="tsconnection.cpp:501">
<![LOG[Retrying download...]LOG]!><time="16:02:44.290+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="tsconnection.cpp:508">
<![LOG[dwErr, HRESULT=800704c3 (e:\nts_sms_fre\sms\framework\tscore\tsconnection.cpp,517)]LOG]!><time="16:02:47.300+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="tsconnection.cpp:517">
<![LOG[Failed to connect to "\\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000BD" (1219)]LOG]!><time="16:02:47.300+-60" date="12-12-2011" component="InstallSoftware" context="" type="3" thread="3040" file="tsconnection.cpp:517">
<![LOG[!slistSMBPaths.empty(), HRESULT=80040103 (e:\nts_sms_fre\sms\framework\tscore\resolvesource.cpp,2163)]LOG]!><time="16:02:47.300+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="resolvesource.cpp:2163">
<![LOG[TS::Utility::GetContentLocations( pszPackageId, L"", lSourceVersion, m_sSiteCode, m_sManagementPoint, &m_oHttpTransport, sClientID, TRUE, sNetworkAccessAccount, sNetworkAccessPassword, TRUE, TRUE, slistSMBPaths, slistHttpPaths ), HRESULT=80040103 (e:\nts_sms_fre\sms\client\osdeployment\installsoftware\dsutils.cpp,843)]LOG]!><time="16:02:47.300+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="dsutils.cpp:843">
<![LOG[Content location request for CEN000BD:2 failed, hr=0x80040103]LOG]!><time="16:02:47.300+-60" date="12-12-2011" component="InstallSoftware" context="" type="3" thread="3040" file="dsutils.cpp:843">
While installing a single package from the same DP (VAXCMDP01) looks like this:
![LOG[PackageID = 'CEN000D1']LOG]!><time="15:29:13.401+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="2768" file="main.cpp:332">
<![LOG[BaseVar = '', ContinueOnError='']LOG]!><time="15:29:13.401+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="2768" file="main.cpp:333">
<![LOG[SwdAction = '0002']LOG]!><time="15:29:13.401+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="2768" file="main.cpp:334">
<![LOG[GetExecRequestMgrInterface successful]LOG]!><time="15:29:13.417+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="2768" file="installsoftware.cpp:218">
<![LOG[Retrieving value from TSEnv for '_SMSTSPolicyCEN000D1_Install']LOG]!><time="15:29:13.417+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="2768" file="installsoftware.cpp:85">
<![LOG[::DecompressBuffer(65536)]LOG]!><time="15:29:13.417+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="2768" file="ccmzlib.cpp:735">
<![LOG[Decompression (zlib) succeeded: original size 2844, uncompressed size 22640.]LOG]!><time="15:29:13.417+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="2768" file="ccmzlib.cpp:646">
<![LOG[ADV_AdvertisementID=CEN20022]LOG]!><time="15:29:13.417+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="2768" file="installsoftware.cpp:1119">
<![LOG[PKG_PSF_ContainsSourceFiles=TRUE]LOG]!><time="15:29:13.417+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="2768" file="installsoftware.cpp:1138">
<![LOG[::DecompressBuffer(65536)]LOG]!><time="15:29:13.417+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="2768" file="ccmzlib.cpp:735">
<![LOG[Decompression (zlib) succeeded: original size 12, uncompressed size 4.]LOG]!><time="15:29:13.417+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="2768" file="ccmzlib.cpp:646">
<![LOG[SoftDist paused cookie = 16271]LOG]!><time="15:29:13.417+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="2768" file="installsoftware.cpp:181">
<![LOG[Found the location for the package _SMSTSCEN000D1. The location is on \\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000D1\]LOG]!><time="15:29:13.417+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="2768" file="resolvesource.cpp:3146">
<![LOG[nPos != CCM::Utility::String::npos, HRESULT=80004005 (e:\nts_sms_fre\sms\framework\tscore\resolvesource.cpp,253)]LOG]!><time="15:29:13.417+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="2768" file="resolvesource.cpp:253">
<![LOG[Creating a connection to \\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000D1\ with default account]LOG]!><time="15:29:13.417+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="2768" file="resolvesource.cpp:2243">
<![LOG[Connection request for "\\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000D1"]LOG]!><time="15:29:13.417+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="2768" file="tsconnection.cpp:208">
<![LOG[No credentials available for connecting to "\\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000D1". See whether the share has already been connected.]LOG]!><time="15:29:13.417+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="2768" file="tsconnection.cpp:233">
<![LOG[Connecting to "\\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000D1"]LOG]!><time="15:29:13.510+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="2768" file="tsconnection.cpp:268">
<![LOG[Successfully connected to "\\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000D1"]LOG]!><time="15:29:13.588+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="2768" file="tsconnection.cpp:287">
<![LOG[SMS PkgID 'CEN000D1' resolved to location '\\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000D1\']LOG]!><time="15:29:13.635+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="2768" file="installsoftware.cpp:145">
Notice that it never checks for DPs in the same way as the multiple package install:
<![LOG[Found 0 DPs in subnet, 1 DPs in local site, 0 DPs in remote location and 0 Multicast DPs]LOG]!><time="16:01:21.389+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="resolvesource.cpp:1974">
I know that the TS checks package dependencies before executing the TS. That's not possible with Multiple packages since they are variable dependant. I think this is somehow related although it doesn't explain why my client can't authenticate properly.
The Network Access Account is a member of Domain Users and Domain Users have Read Access on the share and on the folder of the VAXCMDP01 DP - which should be identically configured to our other DPs closest to our ConfigMgr Server.
Any ideas?
Kind regards,
Mathias

Get stuck in Installation step due to language change in the OTN

Hi Friends
I am following the crystal train Instructions to setup Development Environment for BPEL
these are the steps given in that
Step1 : Oracle Database 10g Instructions
Step 2 : Repository Creation Utility
Step 3 : Oracle Weblogic Server 10.3.3
Step 4 : Oracle SOA Suite 11.1.1.2.0
Step 5 : Upgrade to Oracle SOA Suite 11.1.1.3.0
Step 6 : Domain Creation
Step 7 : Verification of Admin Server Installation
Step 8 : Verification of SOA Server Installation
Step 9 : Verification of BAM Server Installation
Step 10 : JDeveloper Installation
Step 11 : SOA Extension for JDeveloper Installation
Step 12 : Oracle Service Bus 11g Installation
Step 13 : Extension of Weblogic Domain With OSB
Step 14 : Verification of OSB Server Installation
Step 15 : SOAP UI
Step 16 : JMS Adapter
Step 17 : DB Adapter
Step 18 : BAM Adapter
I have completed until step 11
But in the
Step 12 : Oracle Service Bus 11g Installation
As per the document step
I want to download oracle service bus(11.1.1.3.0)
This will get downloaded as ofm_osb_generic_11.1.1.3.0_disk1_1of1.zip
But in my case i went to that link but i cannot find oracle service bus(11.1.1.3.0).so i put the requirement in the searh region ..but i find this software oracle service bus(11.1.1.3.0) In chinese and japanese language ... please help to get download this software and to complete my installation process
Thanks in Advance
Ur help ll be appriciable
Thiliban

Hi Friends
where ever i go i am getting pointed to download Oracle Service Bus 11g (11.1.1.4.0)
if i down load "Oracle Service Bus 11g (11.1.1.4.0)" ll it affects my installtion process because i have done every thing based on the document ...
more over i have installed This sofwware in my system
Repository Creation Utility (11.1.1.3.3)
Oracle Weblogic Server 10.3.3
Oracle SOA Suite 11.1.1.3.0
oracle Jdeveloper 11g(11.1.1.3.0)
If i install "Oracle Service Bus 11g (11.1.1.4.0)" ll it affect my process??? (or )ll It support the process??
I have downloded the "Oracle Service Bus 11g (11.1.1.4.0)" .when i try to install
it just asked for
Welcome=> next
step 2 install software update => i clicked skip software updates =>next
step3 installation location => i got
Oracle Middleware home => c:\Oracle \Middleware\
Oracle HOme Directory : Oracle_OSB1
when i click next=>i get error message
(INST-07286 :specified oracle Middleware home location does not have version 10.3.4.0 of weblogic server .if the version iscorrect then configuring with the weblogic server will fail)
so i tried this one
Oracle Middleware home => c:\Oracle \Middleware\wlserver_10.3
Oracle HOme Directory : Oracle_OSB1
=>next
I get INST -07248 specified middleware home location is not a valid location
PLEASE HELP ME I STRUGGLING A LOT TO INSTALL THIS SOFTWARE PLEASE
Thanks In advance
your help will be appreciable
Thiliban
Edited by: Newbie on Jan 31, 2011 4:29 AM

Start multiple domains simultaneously on 1 Weblogic server installation?

Is it okay to start and run multiple domains simultaneously. Better yet, when having multiple domains on 1 WLS server, should each domain have a different port number in order to be run simultaneously?
Here's my scenario - I installed Oracle Business Intellgence, which by default installs and configures WLS server for certain Business Intelligence applications (BI Publisher). This instance was running fine and good and still is.
Then I had another application, Oracle Data Integrator, which has a Console piece that requires a domain on WLS. So instead of modifying the existing domain for Oracle Business Intelligence, I created a new domain via the Configuration Wizard and selected those components for Oracle Data Integrator.
therefore current domains:
...\domains\bifoundation_domain --> installed automatically as part of Oracle Business Intelligence
...\domains\odi11g --> I created this domain after I
Now I have 2 domains under 1 WLS Server (windows 7 64bit), but if I startWeblogic.cmd for the bifoundation_domain, and I startWeblogic.cmd for the odi11g...then only the components for the bifoundation_domain become available via the WLS Console.
Questions:
- Can I run both domains simultaneously?
- Should I have modified the bifoundation_domain to include Oracle Data Integrator component; therefore only having 1 domain but having everything run under that domain?
- Does the Port for each domain matter? both bifounddation_domain and odi11g domain use ports 7001
Are there any other considerations? Thanks much.

Hi,
It is perfectly OK to run multiple domains on a single Weblogic server installation. Only constraint would be you have enough capacity available on your server to start multiple instances.
Things to note is, if your domain1 is running on listen address : port { localhost : 7001 } then your other domain should be configured on a different port say {localhost : 8001 }. If you want both domain to run on same port then go for virtual IP's to be plumbed on your physical network interface and configure as,
domain1 - { ip1 : 7001 }
domain2 - { ip2 : 7001 }
this way you will can access both domain admin console on same port.
Remember, Weblogic resources cannot be shared between domain, however a single nodemanager will be enough to monitor both the domains.
* rank it if answer is helpful :) *
Thanks,
Ranjan

SAP installation steps by steps notes of 4.7 on WIN2003 Server

Hi All,
I need the installation steps of SAP IDES 4.7 on windows 2003 server with screen shots.
I have one more doubt.
I have installed WINDOWS XP MEDIA CENTRE.
Is it possible to install 4.7 on this?
Is so then how?
I have 120GB HDD and 1GB RAM.
Is it fine to install 4.7 or should i upgrade?
If there is any notes with screen shots please me at [email protected]
Thanks in advance.

Please follow the below process:
System Configuration -
P-IV - 2.4 Ghz with 1 GB RAM
HDD - 160 GB,
Partion's C: 10 GB, D & E - 50 GB, F - 40GB
1. Install OS (Windows 2003 Advanced Server)
Computer/Hostname Name - india
after OS, Install Lookback Adapter with IP 192.168.1.1/24
Check Optimsation Setting in File and Printer Sharing
of Network Adapter
Make following entry in host file (system32\drivers\etc\hosts)
192.168.1.1 india SAPTRANSHOST
2. Install winzip
3. Install Sun java SDK 2 - 1.4.2_3 in default location (c:\j2sdk1.4.2_03)
make following entries in the environment variables. under both
administrator and system variables
JAVA_HOME C:\j2sdk1.4.2_03
PATH %JAVA_HOME%\bin;%PATH%
4. Increase the SIze of Virtual Memory to 3 GB.
5. Install Ntpatch from F:\SAPINST\NT\I386\NTPATCH\R3DLLINS.EXE
6. Install Oracle from F:\RDBMS1\NT\I386\sapserver.cmd
Database Name - Orahome92 and Path - d:\oracle\ora92
Select not to create database.
click in the checkbox Net configuration Assistant select - perform using typical configurations
make following entries in the environment variables. under both
administrator and system variables
CLASSPATH D:\oracle\ora92\jdbc\lib\classes12.jar;%CLASSPATH%
7. Patch Installation of Oracle ( 9.2.0.2.1)
Stop the following services
OracleOraHome92Agent - D:\oracle\ora92\bin\agntsrvc.exe
OracleServiceV11 - d:\oracle\ora92\bin\ORACLE.EXE V11
Install the Oracle Patch from F:\RDBMS3\NT\I386\patches\9.2.0.2.1\setup.exe
8. Install SAP by clicking on F:\SAPINST\SAPINST\NT\SETUP.CMD
Select to Install Central Instance
SAP System ID - V11
Instance No. - 00
11. Now click on run SAPinst ORACLE SAPINST - Prepare New Installation
12. Now click on run SAPinst ORACLE SAPINST - SAPinst Server with GUI select
select to install Database Instance
Select The drive for SAPsearch, SAPBackup, SAPcheck, SAPTrace - d:\
Drive for redolog - e:\
SAPdata drives
sapdata1 d:\ size 8.52 gb
sapdata2 e:\ size 10.7 gb
sapdata3 d:\ size 10.35 gb
sapdata4 e:\ size 12.00 gb
log file are created in -
OriglogA d:\
mirrlogA e:\
OriglogB d:\
mirrlogB e:\
MNLS not installed
13. Database instance will take the longest time approx 150 Minutes
following process take the longest to install
Database tablespaces
Database Load - r3load jobs
Updating Database Statistics
14. Install the SAP GUI
15. Start the SAP R3 System by right clicking on SID and selecting All Task then Start
16. Login into the client 000 using username SAP* and run the following transcations.
SICK - installation check
SE06 - Post Installation Activity
STMS - Transport Management SYstem
17. Login into client 001
-using userid SAP* and change the password
-using userid DDIC and change the password
18. Login into client 066
-using userid EARLYWATCH and change the password
I sent this to your mail Id also.
Please reward if helpful.

OIM 9.1 installation WLS 10.3.0

Hi,
I'm installing oim 9.1 on WLS 10.3.0 following "Installation and Configuration Guide for BEA WebLogic Server" (oficial oracle doc). Actually XlWebApp is running, I mean, I able to login to Admin console with "xelsysadm", But I'm not sure if my oim installation is correct, AdminServer.log display some errors at init time whe I execute ./xlStartWLS.... I dont understand the "default JMS queue configuration":
Default JMS Queue Configuration
Previously, Oracle Identity Manager used a single JMS queue (named xlQueue) for all asynchronous operations including requests, reconciliation, attestation, and offline tasks. In release 9.1.0, by default, Oracle Identity Manager uses separate JMS queues for specific operations to optimize JMS queue processing. The following list shows the JMS queues in the default configuration and indicates the operation related to each queue:
xlQueue (for request operations)
xlReconQueue (for reconciliation operations)
xlAuditQueue (for auditing operations)
xlAttestationQueue (for attestation operations)
xlProcessQueue (for use in a future release)
Does the installation proces SHOULD crete these queues?? or SHOULD be created manually in the WLS console???
In the "Requiered Post Installation Tasks" -> "Setting Up XML Registry" I think the document refers to an alder version of WLS, and for me, its not clear how to create/configure correctly "the XML registry" in WLS 10.3.0, I create a XML Registry but when I Try to Configure a New XMLParserSelectRegistryEntry with the following instructions:
In the left frame, click XML, and then click your new XML registry entry to expand it.
Right-click Parser Select Entries, and then select Configure a New XMLParserSelectRegistryEntry from the shortcut menu.
Enter the configuration information:
1.Ensure that the Public ID field is blank.
2.Ensure that the System ID field is blank.
3.In the Root Element Tag field, enter database.
4.In the Document Builder Factory field, enter the following: org.apache.crimson.jaxp.DocumentBuilderFactoryImpl
5.Ensure that the Parser Class Name field is blank.
6.In the SAX Parser Factory field, enter the following: org.apache.xerces.jaxp.SAXParserFactoryImpl
7.Click Create.
Weblogic display:
A XML Parser Select Entry Public ID must be specifed.
SO..... STEPS 1 and 2 are correct for WLS 10.3.0??? how to know the "Public ID"???
Please helpme to clarify the correct postinstallation steps.
Anay help aprecciated.

These queues are automatically created by OIM during installation. You can verify this by loggin into WLS admin console and going to
Home >Services > Messaging >JMS Modules >OIM_JMS_MODULE >Summary of Resources

Content server installations for OLM

Dear all,
We are in 11.5.10.2 instance with DB 10.1.0.5 ( upgraded) on multy node HPUX-PA-RISC and Itanium
We need to install content server in the different m/c. and we are going through the note 351047.1
In that they mentioned "Install container"
Is webserver Oracle 9iAS Release 2 will work for OLM content server setup.
If that is the case Is infrastructure should be installed first?
Is the Portal and wireless will work for our case?
what about 9i AS application server installation?
Kindly give us the detailed installation steps for OLM content server setup.
and What OS will be best suitable for this?
Thanks and regards
Vasu

Dear all,
I am having some doubts in the doc: 374677.1 Utilising content server with Oracle Learning management.
Let us take our existing oracle application as "APPS server" and content server install on windows is "CONTENT server"
(1) Install the container, such as Apache and ApacheJserv.
Ans: CONTENT server
(2) Create a servlet repository called servlets. For example, in Jserv, the servlets
repository exists by default.
Ans: CONTENT server
(3) Copy the following files to your servlet repository directory:
$JAVA_TOP/oracle/apps/ota/admin/common/util/ContentServerServlet.class
$JAVA_TOP/oracle/apps/ota/admin/common/util/ProtocolConstants.class
$JAVA_TOP/oracle/apps/ota/admin/common/util/SystemUtils.class
$JAVA_TOP/oracle/apps/ota/admin/common/util/SystemUtils$JarUtility.class
$JAVA_TOP/oracle/apps/ota/admin/common/util/ContentServeerClientData.class
Note:
The file location depends on the variable $JAVA_TOP.
If the application is running successfully then these files should definitely exist there
Make sure that the ENTIRE directory structure is copied over to the servlet repository directory.
So if the servlet repository directory is:
$ORACLE_HOME/Apache/Jserv/servlets
then the destination of these classes are as follows:
$ORACLE_HOME/Apache/Jserv/servlets/oracle/apps/ota/admin/common/util/ContentServerServlet.class
$ORACLE_HOME/Apache/Jserv/servlets/oracle/apps/ota/admin/common/util/ProtocolConstants.class
etc
Ans: APPS server to CONTENT server. how top copy entire directory structure
is we need to create directory like "oracle/apps/ota/admin/common/util"
(4) Also ensure the oracle.apps.fnd.common.VersionInfo.class file is located
under the class path directory that is defined for the repository.
Note:
This file should be found under $JAVA_TOP as follows:
$JAVA_TOP/oracle/apps/fnd/common/VersionInfo.class
Again, the entire directory structure needs to be copied, for example.:
$ORACLE_HOME/Apache/Jserv/servlets/oracle/apps/fnd/common/VersionInfo.class
Ans: from APPS server to CONTENT server
==========================================
(5) In zone.properties, add the following: (????? which zone properties
APPS server or CONTENT server?????????
# ----- OLM Content server ----- # servlet.OtaContentServerServlet.code=oracle.apps.ota.admin.common.util.ContentServerServlet
servlet.OtaProtocolConstants.code=oracle.apps.ota.admin.common.util.ProtocolConstantsservlet.OtaSystemUtils.code=oracle.apps.ota.admin.common.util.SystemUtils
servlet.OtaSystemUtils$JarUtility.code=oracle.apps.ota.admin.common.util.SystemUtils$JarUtilityservlet.OtaContentServerClientData.code=oracle.apps.ota.admin.common.util.ContentServerClientData
#----- END OLM
Note:
The zone.properties file location can vary depending on the implementation, usually in the apache server.
Ask the admin who set up the apache server, or look under the apache server setup.
(6) Create an alias for the directory where the content will be stored. For example, in Apache, to create an alias for the physical directory
Ans: CONTENT server
D:/apache/rootdir/, add the following inside the httpd.conf file:
Alias /content/ ’D:/apache/rootdir/’
(7) Add the list of middle tiers and the temporary file location as arguments to the Java Interpreter. For example, in Jserv, add following lines inside the jserv.properties file:
Ans : CONTENT server.
wrapper.bin.parameters=-Dmiddletier=148.87.19.51+148.87.19.50+144.25.78.202+10.10.20.140wrapper.bin.parameters=-DTemp=D:\temp
wrapper.bin.parameters=-Djava.io.tmpdir=/dbfiles/applcsf/log
Here the numbers, such as 148.87.19.51 and 148.87.19.50, are IP addresses of all trusted middle tiers, and + is the separator for multiple addresses.
Servers not specified in the list are not able to access the servlet.
D:\temp is the absolute path of the temp location where files are saved temporarily while handling physical content.
/dbfiles/applcsf/log is any existing directory for log files.
Pl go through the above and clear my doubt. ( about which server we need to do the task).
1. CONTENT server.
2. CONTENT server.
3. from APPS server to CONTENT server.
4. from APPS server to CONTENT server.
5. ????? which server CONTENT server or APPS server??????? if it is a APPS server under which directory the zone.property file will locate.
6. CONTENT server.
7. CONTENT server.
Kindly suggest me.
Regards
Vasu

OIM 11g R2 installation Issue. OIM Schema creation failed using RCU 11.1.2

I have been trying to install OIM 11g R2 on a Windows server 2008 R2 64 Bit and have been encountering the following error during the OIM schema creation. The other schemas, such as Metadata, SOA, user messaging services and other associated schema creation was successful. But, the OIM schema creation was taking more than 2 minutes and finally it fails with the below error.
RCU-6130: Action failed
RCU-6135: Error while trying to execute java action.
Components used:
OS: Windows Server 2008 R2 64 Bit
DBS: 11gR2 (11.2.0.1)
RCU: 11.1.2
The first error occured was ora-12637 packet receive failed followed by Table or View does not exist. I could not fetch much information from the oim and rcu.log.
I have set the processes, open_cursors and session_cached_cursors as suggested in the preinstallation step of OIM 11g R2 installation.
Any pointers on this will be highly appreciated.
Thanks,
Srini

Copy the msvcr71.dll file from rcuHome\jdk\jre\bin inside rcu installer and paste it in C:\Windows\SysWOW64.
Try running the rcu again with the new user i.e. instead of DEV_OIM, run it with DEV_OIM1.
Or drop the DEV_OIM user first and then use the same user.

OIM 11g Server Configuration Wizard Error - Cannot Connect to Oracle DB

I appreciate any and all suggestions or thoughts on how to best continue troubleshooting this error that I am describing below.
I am attempting to install Oracle Identity and Access Management Suite 11g on a Windows 7 machine…in following the installation guides I have successfully installed the following Oracle Components
- Oracle Database 11.2.0.1.0
- Created Schemas using RCU 11.1.1.3.3
- Oracle WebLogic Server 10.3.3.0
- Oracle SOA 11.1.1.2.0
- Oracle SOA 11.1.1.3.0 (Patch Set)
- Oracle IAM SUITE 11.1.1.3.0
Following the above installations, I created a new WebLogic Domain and as the next step am running the OIM Configuration Wizard to configure the OIM Server, however I am unable to setup a connection to the Oracle DB via the OIM Configuration Wizard. I am getting an error message when attempting to setup the connection to the Oracle Database using the OIM 11g Server Configuration Wizard:
ERROR:*
INST:6102 Unable to connect to the database with the given credentials.
*+[DETAILS] Check the values. Make sure the Database is up and running and connect string, user name, and password are correct.+*
INST:6102 Unable to connect to the database with the given credentials.
*+[DETAILS] Check the values. Make sure the Database is up and running and connect string, user name, and password are correct.+*
When installing the Oracle Database 11gR2 I used the following install configuration:
Oracle base: C:\MyApps\Oracle
Software location: C:\MyApps\Oracle\DB_HOME\11.2.0\dbhome_1
Database file location: C:\MyApps\Oracle\DB_HOME\oradata
Database Edition: Personal Edition (3.27 GB)
Character Set: Unicode (AL32UTF8)
Global database name: orcl.dev.com
Administrative Password: Password1
Confirm Password: Password1
When creating my Schemas using RCU 11.1.1.3.3 I used the following Database Connection Details
DB TYPE: Oracle Database
HOST NAME: localhost
PORT: 1521
SERVICE NAME: orcl.dev.com
USERNAME: sys
PASSWORD: Password1
ROLE: SYSDBA
I used a Prefix of “DEV” when creating the schemas so Schema Owners DEV_OIM and DEV_MDS where created. Also, I configured to use the same password for all Schemas: “Password1″. So the password for DEV_OIM and DEV_MDS should be the same, “Password1″.
REPRODUCING THE ERROR
To reproduce the error, when I launch the Oracle Identity Management 11g Configuration Wizard I am first brought to the “Welcome” Screen. I click the [Next>] button.
Next, I am on the “Components to Configure” screen where I select OIM Server and OIM Design Console and click the [Next>] button. (NOTE I have also tested by simply selecting only the OIM Server)
Next, I am on the “Database” screen where I enter the connection information
Connection String: localhost:1521:orcl.dev.com
(NOTE I have also tested using localhost:1521:orcl)
OIM Schema User Name: DEV_OIM
OIM Schema Password: Password1
MDS Schema User Name: DEV_MDS
MDS Schema Password: Password1
When I click the [Next>] button after entering the Database Connection details I encounter the following two errors (1 error for each logon DEV_OIM and DEV_MDS)
INST:6102 Unable to connect to the database with the given credentials.
INST:6102 Unable to connect to the database with the given credentials.
TROUBLESHOOTING
NOTE: I can successfully start the Oracle DB Services and connect via the Enterprise Console, SQL Plus, and JDBCTest Java Client…I just cannot get past this connection error in the OIM Server Configuration Wizard.
JDBCTest.java TEST CLIENT
NOTE: THIS IS THE JAVA TEST CLIENT THAT I AM USING TO TEST DATABASE CONNECTIVITY THRU A SPECIFIED JDBC URL AND DRIVER THAT WORKS SUCCESSFULLY.*
import java.sql.Connection;
import java.sql.DatabaseMetaData;
import java.sql.DriverManager;
import java.sql.ResultSet;
public class JDBCTest {
public static void main(String[] args) throws Exception {
String url = "jdbc:oracle:thin:@localhost:1521:orcl";
String driver = "oracle.jdbc.OracleDriver";
String user = "DEV_OIM";
String password = "Password1";
try {
Class.forName(driver);
Connection conn = DriverManager.getConnection(url, user, password);
// Get the MetaData
DatabaseMetaData metaData = conn.getMetaData();
// Get driver information
System.out.println("");
System.out.println("#########################################");
System.out.println("# ***DRIVER INFORMATION***");
System.out.println("#");
System.out.println("# Driver Name = " + metaData.getDriverName());
System.out.println("# Driver Version = " + metaData.getDriverVersion());
System.out.println("#");
System.out.println("#########################################");
System.out.println("");
System.out.println("");
// Get database information
System.out.println("#########################################");
System.out.println("# ***DATABASE INFORMATION***");
System.out.println("#");
System.out.println("# Database Product Name = " + metaData.getDatabaseProductName());
System.out.println("# Database Product Version = " + metaData.getDatabaseProductVersion());
System.out.println("#");
System.out.println("#########################################");
System.out.println("");
System.out.println("");
// Get schema information
ResultSet schemas = metaData.getSchemas();
System.out.println("#########################################");
System.out.println("# ***SCHEMA INFORMATION***");
System.out.println("#");
System.out.println("# Schemas:");
while (schemas.next()) {
System.out.println("# " + schemas.getString(1));
System.out.println("#########################################");
System.out.println("");
System.out.println("");
// Get table information
System.out.println("Tables");
ResultSet tables = metaData.getTables("", "", "", null);
while (tables.next()) {
System.out.println(tables.getString(3));
conn.close();
} catch (Exception ex) {
ex.printStackTrace();
*"lsnrctl status" COMMAND TEST SUCCESSFUL*
When the Listener Service is on I get the following output using lsnrctl status command
C:\> lsnrctl status
LSNRCTL for 32-bit Windows: Version 11.2.0.1.0 - Production on 21-SEP-2010 15:59:43
Copyright (c) 1991, 2010 Oracle. All rights reserved.
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows:Version 11.2.0.1.0 - Production
Start Date 21-SEP-2010 14:43:57
Uptime 0 days 1 hr. 15 min. 46 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File C:\MyApps\Oracle\DB_HOME\11.2.0\dbhome_1\NETWORK\ADMIN\listener.ora
Listener Log File c:\myapps\oracle\diag\tnslsnr\\listener\alert\log.xml
Listening Endpoints Summary…
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1521)))
Services Summary…
Service “CLRExtProc” has 1 instance(s).
Instance “CLRExtProc”, status UNKNOWN, has 1 handler(s) for this service…
Service “orcl.dev.com” has 1 instance(s).
Instance “orcl”, status READY, has 1 handler(s) for this service….
Service “orclXDB.dev.com” has 1 instance(s).
Instance “orcl” status READY, has 1 handler(s) for this service…
The command completed successfully

Whenever installing oracle databases, i install the software only first. Then i setup the listener. Then i create a database instance using the dbca tool. This way all the information is added to the pre-existing listener configurations rather than trying to create the listener afterwards. Also, during the dbca database creation, i supply a full service name such as orcl.hostname and use the service name in future configurations where it asked. This usually solves any issues of the listener or database not being found correctly.
-Kevin

Weblogic server installation in red hat linux 5

hi i am new to the weblogic server i am trying to install weblogic server in redhat linux i downloaded .bin file from oracle
i enter these commands
chmod +x wls1035_oepe111172_linux32.bin
./wls1035_oepe111172_linux32.bin
The directory "/tmp" does not have enough space for extraction.
Please input another directory or [Exit]: Exit
i got the error message
please reply i will appreciate your hep

Steps for preparing the installation can be found here: http://download.oracle.com/docs/cd/E17904_01/doc.1111/e14142/prepare.htm#i1183981
To run the installation steps presented here can be followed: http://download.oracle.com/docs/cd/E17904_01/doc.1111/e14142/guimode.htm#i1082009

SQL SERVER INSTALLATION FAILS AND I TRIED SO MANY TIMES TO INSTALL AFTER UNSINSTALLATION , BUT IT SEEMS WORTHLESS.KINDLY SUGGEST ME .

Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2147467259
Start time: 2015-02-16 10:35:41
End time: 2015-02-16 11:15:03
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for SSMS: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for BIDS: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for RS: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for SQLEngine: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for FullText: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for Replication: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Machine Properties:
Machine name: ABHI
Machine processor count: 4
OS version: Future Windows Version
OS service pack:
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered
Package properties:
Description: Microsoft SQL Server 2012 Service Pack 1
ProductName: SQL Server 2012
Type: RTM
Version: 11
SPLevel: 0
Installation location: f:\33ee254b43729031825c982f\x64\setup\
Installation edition: Express
Product Update Status:
None discovered.
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: true
AGTSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Disabled
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CLTCTLRNAME: <empty>
CLTRESULTDIR: <empty>
CLTSTARTUPTYPE: 0
CLTSVCACCOUNT: <empty>
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: <empty>
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE:
CTLRSTARTUPTYPE: 0
CTLRSVCACCOUNT: <empty>
CTLRSVCPASSWORD: <empty>
CTLRUSERS: <empty>
ENABLERANU: true
ENU: true
ERRORREPORTING: true
FEATURES: SQLENGINE, REPLICATION, FULLTEXT, RS, BIDS, BOL, SSMS, SNAC_SDK, LOCALDB
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT Service\MSSQLFDLauncher
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: false
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: MSSQLSERVER
INSTANCENAME: MSSQLSERVER
ISSVCACCOUNT: NT AUTHORITY\Network Service
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: AllFeatures_WithDefaults
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: DefaultSharePointMode
RSSVCACCOUNT: NT Service\ReportServer
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: SQL
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: NT Service\MSSQLSERVER
SQLSVCPASSWORD: <empty>
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: ABHI\abhi24
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: true
TCPENABLED: 0
UIMODE: AutoAdvance
UpdateEnabled: true
UpdateSource: MU
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20150216_102728\ConfigurationFile.ini
Detailed results:
Feature: Management Tools - Basic
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Common Files
Component error code: 0x84BB0001
Error description: The MOF compiler could not connect with the WMI server. This is either because of a semantic error such as an incompatibility with the existing WMI repository or an actual error such as the
failure of the WMI server to start.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xA60E3551%400xD3BEBD98%401211%401&EvtType=0xA60E3551%400xD3BEBD98%401211%401
Feature: SQL Server Data Tools
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Common Files
Component error code: 0x84BB0001
Error description: The MOF compiler could not connect with the WMI server. This is either because of a semantic error such as an incompatibility with the existing WMI repository or an actual error such as the
failure of the WMI server to start.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xA60E3551%400xD3BEBD98%401211%401&EvtType=0xA60E3551%400xD3BEBD98%401211%401
Feature: Reporting Services - Native
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Common Files
Component error code: 0x84BB0001
Error description: The MOF compiler could not connect with the WMI server. This is either because of a semantic error such as an incompatibility with the existing WMI repository or an actual error such as the
failure of the WMI server to start.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xA60E3551%400xD3BEBD98%401211%401&EvtType=0xA60E3551%400xD3BEBD98%401211%401
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x80004005
Error description: The system cannot find the path specified
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xF57C3D6F%400xDC80C325&EvtType=0xF57C3D6F%400xDC80C325
Feature: Full-Text and Semantic Extractions for Search
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x80004005
Error description: The system cannot find the path specified
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xF57C3D6F%400xDC80C325&EvtType=0xF57C3D6F%400xDC80C325
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x80004005
Error description: The system cannot find the path specified
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xF57C3D6F%400xDC80C325&EvtType=0xF57C3D6F%400xDC80C325
Feature: SQL Browser
Status: Passed
Feature: Documentation Components
Status: Passed
Feature: SQL Writer
Status: Passed
Feature: LocalDB
Status: Passed
Feature: SQL Client Connectivity
Status: Passed
Feature: SQL Client Connectivity SDK
Status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20150216_102728\SystemConfigurationCheck_Report.htm

Hi,
It seems to me like you have
1. Previous failed instance of SQL Server installation which subsequently caused further SQL Server installations to fail
2. The windows account with which you logged into machine to install SQL Server is corrupt
You can, If possible create a new windows account give it admin privileges and then log into machine using this account
After you login follow below method to remove failed SQL Server installation
Uninstall
Uninstall SQL Server completely from add remove program. Make sure no previous failed installation fragments are present on your system. Please use this
link for uninstalling existing instance of SQL Server
. If you have SQL Server 2005
use this link .
If you are unable to uninstall SQL Server completely because you deleted SQL Server files and un-installation is giving error please follow below method. This method is tested and suggested on
this thread and
Forum .
Below Solution (about removing reg keys) will work correctly for SQL Server having Just one instance.
If you have multiple instances and you have messed up SQL Server installation please contact Microsoft Support personal to get better guidance on removal of SQL Server. Please DONT use this method if you are new to SQL Server take help of experienced
DBA to locate proper registry keys and remove them if you are not confident at all it would be better calling Microsoft Support.
Note: Removing necessary registry entries might cause SQL Server instance to crash so backup registry before doing changes.
1. Uninstall the existing SQL Server and all the components from the add remove program.
2.
Backup the registry .
3. Delete the following keys using regedit:
--HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft SQL Server
--HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\MSSQLServer
4. Go to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall and delete all the sub-keys referencing SQL Server.
5. Go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services and delete all the keys referencing SQL Server.
6. Rename all the SQL Server folders in the computer.
7. Reboot the machine.
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP

OEID 3 - Endeca Server Installation Issue

Helo,
I am in the process of installing components of OEID 3 in my Windows7 machine.
I installed Weblogic and ADF as per the instructions given here - http://docs.oracle.com/cd/E37502_01/server.751/es_install/toc.htm#Installing%20WebLogic%20Server%20and%20Application%20Developer%20Runtime
I installed Endeca Server as per the instructions given here - http://docs.oracle.com/cd/E37502_01/server.751/es_install/toc.htm#Installing%20Oracle%20Endeca%20Server
There is no error while installing the Endeca Server but the Oracle Home Size is only 44MB while it should be 470MB as per the instruction.
The problem is while creating the WebLogic domain, Endeca Server is not appearing for selection.
Did anyone get into similar situation? Is this related to Windows7? What am I missing?
Thanks,
VJ

Hi VJ,
Are you referring to this step in the installation procedure (Creating the WebLogic Domain for Endeca Server)?
http://docs.oracle.com/cd/E37502_01/server.751/es_install/toc.htm#Creating%20the%20WebLogic%20domain%20for%20Endeca%20Server
If so, this indicates that either the Endeca Server, or the ADF were not properly installed. Are you sure you are using the WLS and ADF packages as indicated in the documentation? Are you using Sun JDK 6?
Julia

OIM multiple server installation steps doc

Similar Messages

Maybe you are looking for