[OIM] OIM 11 install - CFGFWK-60850: Test Failed

Hi!
I am configuring an OIM 11g instance. After I installed, I run the domain configurator and I get the following:
Component Schema=OIM Schema
Driver=oracle.jdbc.OracleDriver
URL=jdbc:oracle:thin:@192.168.91.129:1521/orcl.168.91.129
User=DEV1_OIM
Password=**********
SQL Test=select 1 from schema_version_registry where owner=(select user from dual) and mr_type='OIM' and version='11.1.1.5.0'
IO Error: The Network Adapter could not establish the connection
CFGFWK-60850: Test Failed!
I tried loggin to sqlplus with DEV1_OIM user and credentials are OK.
I don't know what is happening. I run the query using sys user and I have no results (as select user from dual returns sys and there is no schemas with that owner).

I have seen in table schema_version_registry that dev_oim has version 11.1.1.3.0, and query is looking for 11.1.1.5.0..
I used last rcu version (11.1.1.5 downloade last week). If I update the version field, the configurator wizard pass ok.. but I don't want to begin a fresh OIM setup "hardcoding"..
Do you know if there is a related problem with RCU?

Similar Messages

CFGFWK-60850 Error while installing weblogic portal 10.3.5

I am getting below error while installing weblogic portal 10.3.5 configuration wizard for creating domain. Please help me resolve this issue.
OS: Windows 2008 64 bit
Installable file: portal103_generic.jar
This is the first weblogic installation.
Installtion command applied: java -d64 -jar portal103_generic.jar
Test JDBC data sources.
Data Source=cgDataSource
Driver=org.apache.derby.jdbc.ClientDriver
URL=jdbc:derby://localhost:1527/weblogic_eval;create=true;ServerName=localhost;databaseName=weblogic_eval
User=WEBLOGIC
Password=********
SQL Test=SELECT COUNT(*) FROM SYS.SYSTABLES
java.net.ConnectException : Error connecting to server localhost on port 1527 with message Connection refused: connect.
CFGFWK-60850: Test Failed!
Data Source=cgDataSource-nonXA
Driver=org.apache.derby.jdbc.ClientDriver
URL=jdbc:derby://localhost:1527/weblogic_eval;create=true;ServerName=localhost;databaseName=weblogic_eval
User=WEBLOGIC
Password=********
SQL Test=SELECT COUNT(*) FROM SYS.SYSTABLES
java.net.ConnectException : Error connecting to server localhost on port 1527 with message Connection refused: connect.
CFGFWK-60850: Test Failed!
Data Source=p13nDataSource
Driver=org.apache.derby.jdbc.ClientDriver
URL=jdbc:derby://localhost:1527/weblogic_eval;create=true;ServerName=localhost;databaseName=weblogic_eval
User=WEBLOGIC
Password=********
SQL Test=SELECT COUNT(*) FROM SYS.SYSTABLES
java.net.ConnectException : Error connecting to server localhost on port 1527 with message Connection refused: connect.
CFGFWK-60850: Test Failed!
Data Source=portalDataSource
Driver=org.apache.derby.jdbc.ClientDriver
URL=jdbc:derby://localhost:1527/weblogic_eval;create=true;ServerName=localhost;databaseName=weblogic_eval
User=WEBLOGIC
Password=********
SQL Test=SELECT COUNT(*) FROM SYS.SYSTABLES
java.net.ConnectException : Error connecting to server localhost on port 1527 with message Connection refused: connect.
CFGFWK-60850: Test Failed!
Data Source=portalDataSourceAlwaysXA
Driver=org.apache.derby.jdbc.ClientDriver
URL=jdbc:derby://localhost:1527/weblogic_eval;create=true;ServerName=localhost;databaseName=weblogic_eval
User=WEBLOGIC
Password=********
SQL Test=SELECT COUNT(*) FROM SYS.SYSTABLES
java.net.ConnectException : Error connecting to server localhost on port 1527 with message Connection refused: connect.
CFGFWK-60850: Test Failed!
Data Source=portalDataSourceNeverXA
Driver=org.apache.derby.jdbc.ClientDriver
URL=jdbc:derby://localhost:1527/weblogic_eval;create=true;ServerName=localhost;databaseName=weblogic_eval
User=WEBLOGIC
Password=********
SQL Test=SELECT COUNT(*) FROM SYS.SYSTABLES
java.net.ConnectException : Error connecting to server localhost on port 1527 with message Connection refused: connect.
CFGFWK-60850: Test Failed!
Why I am getting this error ? How can i resolve this ?
Edited by: Prajeesh Kumar KM on Feb 25, 2013 12:26 AM

I'm getting this error as well.
Did you resolve this problem?

OIM 11g install

On Windows, OIM 11g install stops due to OracleMTSRecoveryService not running. When i try to run the service, its gives an error saying a ssytem could not find the file specified. Not sure what file its talking about. Anyone help with this?

Hi Gurus,
I think I found the answer.
I downloaded wrong version of weblogic
I had linux 32 , and wanted weblogic 10.3.3, So I went here ( row 3 , column 2)
http://www.oracle.com/technetwork/middleware/ias/downloads/wls-main-097127.html
file name = wls1033_dev.zip
well I was wrong it was not 10.3.3 or something was wrong. SOA installer did not recognise it as 10.3.3.
Who is to blame. I wasted 3 days I hope Oracle keeps right versions in its website for download.
I got the right one from edelievry
http://edelivery.oracle.com/EPD/Download/get_form?egroup_aru_number=11493750
and download =
Download Oracle WebLogic Server 11gR1 (10.3.3) for Linux x86 V21014-01 703M
Hope this helps some one.
Thanks!

Pavilion G6-1203ey: Hard Disk Test FAILED, but can still boot into Windows

Hello
I have HP Pavilion G6-1203ey laptop. After installing Windows (7 ultimate, 64 bit) and some drivers on it and after several restarts, it hanged at Windows logo and I had to turn it off with power button. Then after turning it on, it gave me the option to repair problems which are preventing it from starting up, from there I let it to restore the computer to an earlier restore point and after a restart the Windows was working again. After that I decided to do a hard disk check just in case.
The Hard Disk Self Test ended up with a message: Hard Disk 1 Full (305). Then I installed HP Unified Extensible Firmware Interface (UEFI) Support Environment and did hard disk from there. I chose the comprehensive test from the options, but it finished fairly quickly (in ~1 minute) with the following output:
Testing Drive: 1
Hard Disk SMART Check : PASSED
Hard Disk Short DST : FAILED
FAILURE ID : PTTU22-5T774L-MFPV4K-60S003
PRODUCT ID : A5Q15EA#B1R
Hard Disk 1
Hard Disk Test : FAILED
A bit more background:
The previous owner told me that the original HDD was faulty which is why he replaced it with this one last year. He said that other than that there has been no problems with the laptop. The Windows is working right now and this HDD is quite new so I would not have expected any problems with it, but the results from the previously mentioned tests seem troubling. Is there a reason to worry?
Thanks
This question was solved.
View Solution.

Hi Alnuir,
Welcome to the HP Support Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I read your post and looked into the failure ID that you posted regarding the failed Short DST test. That error is indicating a hard disk failure meaning that if it hasn't failed it might soon. If everything is working I would considering backing up your data on a regular basis just to be safe. You could have a local technician take a look at the hard drive to see how close it is to full failure.
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Will not let me sync my playlist after new purchases - sync test failed

error message from diagnostic:
Microsoft Windows XP Professional Service Pack 2 (Build 2600)
Hewlett-Packard HP Pavilion dv9000 (EZ458UA#ABA)
iTunes 7.6.0.29
QuickTime 7.4.1
CD Driver 2.0.6.1
CD Driver DLL 2.0.6.2
Apple Mobile Device 1.1.3.26
Bonjour 1.0.4.12 (118.4)
iTunes Serial Number E72858419F57DA04
Current user is an administrator.
The current local date and time is 2008-06-19 10:50:29.
iTunes is not running in safe mode.
Video Display Information
NVIDIA GeForce Go 6150
** External Plug-ins Information **
No external plug-ins installed.
** Network Connectivity Tests **
Network Adapter Information
Adapter Name: {0D1D1EA1-C577-4A0B-B332-F0F06E997127}
Description: Broadcom 802.11b/g WLAN - Packet Scheduler Miniport
IP Address: 172.16.205.238
Subnet Mask: 255.255.254.0
Default Gateway: 172.16.204.254
DHCP Enabled: Yes
DHCP Server: 172.16.204.254
Lease Obtained: Thu Jun 19 09:05:37 2008
Lease Expires: Fri Jun 20 09:05:37 2008
DNS Servers: 216.136.33.82
216.136.33.82
216.54.204.186
Adapter Name: {C3658844-9940-4DCE-B624-6D3323FE3076}
Description: NVIDIA nForce Networking Controller - Packet Scheduler Miniport
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway:
DHCP Enabled: Yes
DHCP Server: 192.168.1.1
Lease Obtained: Sun Feb 11 10:25:51 2007
Lease Expires: Mon Feb 12 10:25:51 2007
DNS Servers:
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to iTunes Store was successful.
Secure connection attempt to iTunes Store was successful.
Secure connection attempt to iPhone activation server was successful.
Last successful store access was 2008-06-19 10:48:57.
** CD/DVD Drive Tests **
LowerFilters: PxHelp20 (2.0.0.0),
UpperFilters: GEARAspiWDM (2.0.6.1),
E: HL-DT-ST DVDRAM GSA-4084N, Rev KQ09
Drive is empty.
** iPod/iPhone Connectivity Tests **
iPodService 7.6.0.29 is currently running.
iTunesHelper 7.6.0.29 is currently running.
Apple Mobile Device service 1.14.0.0 is currently running.
Universal Serial Bus Controllers:
Standard OpenHCD USB Host Controller. Device is working properly.
Standard Enhanced PCI to USB Host Controller. Device is working properly.
FireWire (IEEE 1394) Host Controllers:
OHCI Compliant IEEE 1394 Host Controller. Device is working properly.
Most Recent Device Not Currently Connected:
iPod nano (Second Generation) running firmware version 1.1.3
Serial Number: YM652P5NVQK
** iPhone/iPod Touch Sync Tests **
One or more sync tests failed.

Two things:
- Completely remove and reinstall the Apple software by the following. That link provides a link for Win &.
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
- If you still have a problem after restoring the iPod to factory defaults/new iPod you likely have a hardware problem. An appointment at the Genius Bar of an Apple store is then in order.

Windows App Certification Kit - Test Fails for Validate Desktop App at "Write appropriate Add/Remove Program values"

Hi,
I am trying to validate a .Net Framework 4 WinForms application for use in the Microsoft Partner Network portal.
I am using Windows App Certification Kit 3.4 for Windows 8.1 , and the Validate Desktop App option.
To build the package I am using InstallShield 2012 SPR Limited Edition (for Visual Studio), and the validation fails
only with the following error (please also see the attached image):
Clean reversible install test: Failed to Write appropriate Add/Remove Program values
Error Found: The registry population test detected the following error: app didn't create the required registry entries.
A non-optional value 'DisplayName' is missing or invalid (same for 'Publisher', 'ProductVersion')
Please note that I have filled in all the publisher/product details in the InstallShield project, on the General Information page.
Also I have tried to use the Microsoft Visual Studio Installer Project for VS2013, and the validation failed with the exact same error.
(https://visualstudiogallery.msdn.microsoft.com/9abe329c-9bba-44a1-be59-0fbf6151054d)
Any help would be very appreciated.
Thank you.

You may need to add the necessary info to the app’s Windows Installer package so it can configure Add/Remove Programs in Control Panel correctly. Setting these properties automatically writes the corresponding values into the registry. From the picture,
you are missing some necessary information about your desktop app.
Also You need the correct admin permissions to write to the registry.
Please refer to this thread:
http://stackoverflow.com/questions/21182856/windows-app-certification-kit-test-result-app-didnt-create-the-require-regist
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Hard disk test failed on HP Pavillion dv6-1100eo notebook

I have a HP Pavilion dv6-1100eo Entertainment Notebook PC (P/N: NR597EA) with Vista 32-bit. Unfortunately no warranty left in and general I have been very happy with this notebook.
However suddenly Wondows would not start up - and it did not even find Startup Recovery partition on the harddisk. As I wasn't sure if this Startup Recovery was on hard disk or not - I ordered System Recovery DVDs for this Scandinavian language version.
These disks did not work - so I figured I have probably not done my homework before ordering those disks.
Then I ran system Diagnostics (even if I have a old BIOS version F.03). On the diagnositics - both Quick and Full Hard disk test failed during the first 1% of the scan.
Is there anything that can be done - or is the only option new hard disk? In case - what hard disk is recommended that is not too expensive - as I don't want to invest too much into a soon 3 year old notebook.
I recently bougth an external harddisk (1 TB) based on USB connection. Can that be used bypassing internal HD. In this way I would increase HD capacity and not invest anymore into this notebook - since I already have the recovery DVDs
It is probably only a time question before I will buy a new HP notebook - that is why I don't want any long permanent fix of this problem.
This question was solved.
View Solution.

Hi,
Sorry to say, but you won't be able to install or boot Vista from the external HDD, so if you need to get the notebook working, you're going to have to replace the internal drive.
The drive on the link below is an example of one that would be fine for your notebook.
500Gb Hard Drive
The procedure to replace the Hard Drive starts on Page 57 of your Maintenance & Service Guide.
Once done, simply use your Recovery DVDs to reinstall the Operating System on the new drive.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Massive stability issues - Disk Utility repair failed, hardware test failed

Hi,
I am having massive stability issues. The installer will not install anything, programs are quitting randomly, and it is getting very annoying!
I read through a lot of posts and I have attempted to:
Repair my disk using the install cd: but that failed.
I did a Hardware test: but i had an error relating to fonts (?), couldn't see anything on the screen and I couldn't do anything.
Is there something else I could do that I haven't tried?
I have had my PB for a little over a year and have had no issues like this before. All of these issues seemed to start when I was playing a game and it suddenly just quit; I then couldn't go back into the game or re-install the game.
Help!!
12" Powerbook G4 1.5Ghz Mac OS X (10.4.6) 768 RAM

Hi, Dan.
You wrote: "Repair my disk using the install cd: but that failed."That's a big problem. You won't get very far until the problems noted by Repair Disk, the function I presume you ran based on your description, are sorted out. It's possible the hard drive has failed.
If the Apple Hardware Test failed, that's another significant problem. If it produces messages you can read that describe the failure, write them down. The machine may need to be serviced by an Apple Authorized Service Provider.
As to your next steps, first run the procedure specified in my "Resolving Disk, Permission, and Cache Corruption" FAQ. Perform the steps therein in the order specified to see what's up with your disk and if anything can be done to correct that.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X
Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
I may receive some form of compensation, financial or otherwise, from my recommendation or link.

My Macbook aliminium unibody from late 2008 will not boot. I reach the grey screen with the apple icon and the spinning grey gear. I used disk utility to boot it but it said integrity test failed. I don't know what to do can anyone please help?

My Macbook aliminium unibody from late 2008 will not boot. I reach the grey screen with the apple icon and the spinning grey gear. I used disk utility to boot it but it said integrity test failed. I don't know what to do can anyone please help?

Sounds like you may have a harddrive issue. You are probably going to need to get that changed out and then install the OS X again to get it going.

SQL Developer: Failure -Test failed: IO Error: Got minus one from a read ca

SQL Developer: Failure -Test failed: IO Error: Got minus one from a read call
Hi,
I am sorry I know this is probably most frequently asked question, but I have no idea what I should be searching for.
I looked up the error above to see if i could find a solution, but unfortunately I did not.
Right Let me start of with I am a Total Noob.. well it terms of having to install Oracle 11g myself.
In my University they hosted a database, and assigned us a User & pass thats how I have been using SQL Developer,
but since I am not longer a university student. I need to use Oracle Database.
So I downloaded Oracle 11g Enterprise Installed it on my laptop that i don't use much.
Name the Database: Rudu
It did all the installation, and seemed to have succeeded, I went on to the https://localhost:1158/em (Though am not sure why em? whats the deal with that? I thought it would be https://localhost:1158/Rudu) anyways....
Logged in using the System user.
Went to Users and created a user called: RUDUHR
Thought yeah its working... went on to my other laptop opened up SQL Developer.
Created Connection with the following Settings
Con Name: RK
User: RUDUHR
Pass: TEST
Con Type: Basic
Role: Default
Hostname: 192.168.0.8
Port: 1158
SID: Rudu
It don't work though Why is that??????
192.168.0.8 is laptop that has oracle 11g installed and running.
I even tried using SYSTEM user to connect, but same error
also tried changing SID to em, it made no difference I keep getting the error Status: Failure -Test failed: IO Error: Got minus one from a read call
So ya am clueless... LOL I only know how to create tables and stuff not how to configure a Database.
and just so you know I did forward the port on me router to correct laptop.

It don't work though Why is that??????
192.168.0.8 is laptop that has oracle 11g installed and running.
It is because you don't read documentation.
1158 is the default port for Enterprise Manager
1521 is the default port for Sqlnet.
Your port number is incorrect.
Needless to say, you can create your tables in EM too.
As per the Forums Etiquette post (first link when you get to this page) it is recommended you read documentation before asking Yet Another Doc Question.
Sybrand Bakker
Senior Oracle DBA

SQL Developer: Failure -Test failed: IO Error: Network Adapter No Conn

SQL Developer: Failure -Test failed: IO Error: The Network Adapter could not establish the connection
Hi,
and sorry this is a really common questions and yes I did do a search, but I don't understand it.
First let me just tell you that Oracle 11g is installed on my second laptop on the same Network.
Secondly I can connect to the Database using Oracle SQL Developer on the laptop Oracle 11g is installed on.
The problem is I want to connect to the database on my main Laptop.
I put in the correct details Hostname 192.168.0.8 ( this is the laptop oracle is installed and running on)
Port 1521
SID dbarudu
****** YES I HAVE PORT FORWARDED
****** YES I HAVE ALLOWED 1521 on the FIREWALL
****** YES I HAVE EVEN SWITCHED OFF THE FIREWALL
Now one more thing you should know ... I don't know nothing about Oracle Servers ok.... so I have just installed Oracle 11g Enterprise and thought done it should be working now.
I just need to use oracle db for a project.
So keep in mind I am a total noob and terms like TNSPING etc mean absolutely nothing to me.
So please help, but help with step by step guide on how to get Oracle to let me have access from another computer.

If the Listener is working, then you should not get the error SQL-Developer error you are reporting.
The listener typically runs using the hostname and port 1521. This means it opens tcp port 1521 on all IP addresses of that platform.
The database server by default will register itself with the local listener. Thus the listener will know the database SID, the database services, whether there are dispatchers to support shared server connections and so on.
The client side needs simply to specify 3 pieces of data to connect:
- the IP of the database server
- the tcp port of the listener
- a database identifier (such as Oracle SID or service name) to connect to
It is really that simple.
If this does not work, the problem falls into 2 broad categories:
a) incorrect installation and configuration of the Oracle software (the out-of-the-box install works unless messed up)
b) some kind of networking issue
To troubleshoot any problem means reducing the complexity of the problem, eliminating multiple moving parts and focusing on specific ones, in order to isolate the problem.
For your problem, this will go something as follows:
- does the listener run? (check if the service is running and whether tcp connections are accepted on the listener port - telnet can be used for the latter)
- does the database successfully registers itself with the listener? (check the services command of the listener and relevant db initialisation parameters)
- does a local TNS (tcp network) connection work on that server? (use SQL*Plus and test on that platform client-server connectivity via tcp to the listener)
- does the client platform have connectivity with the server platform? (use ICMP and telnet to test)
- repeat the TNS test on the client platform using the same working TNS tested on the server platform
Do not use JDBC to test the connection - keep it simple and use sqlplus and the standard Oracle Call Interface (OCI). A full client version of the OCI plus sqlplus can be downloaded under the Oracle InstantClient downloads.
Finally - if you expect to simply install and use Oracle, then use the correct version. Oracle Express Edition aka Oracle XE. Installs and works out-of-the-box. The only manual config change to make is (as far as I recall) to run the listener on all IP addresses of that platform. And this required editing the listener.ora file, changing the HOST parameter and restarting the listener.
Also keep in mind that you have not presented an Oracle error code and Oracle error message. But a client application error message. And that message is pretty much meaningless - it does not point to a specific Oracle networking or Oracle server problem. To diagnose that, we expect a TNS or ORA error number.

Trial SAN Certificate & Outlook Anywhere (RPC over HTTP) test fail

I am testing exchange 2013 where autodiscover pass while performing Outlook Anywhere (RPC over HTTP) connectivity test failed with invalid SSL certifiate . I am only using self certifiate .do any one idea if any CA provding SAN certificate trial basis.
Don't forget to mark helpful or answer
connect me :-
http://in.linkedin.com/in/satya11
http://facebook.com/satya.1000

Hi,
Agree with the above suggestion, ExRCA test cannot pass with self-signed certificate. And to ensure Outlook Anywhere work well , we need to install the self-signed certificate on all clients machines.
If you have any question, please feel free to let me know.
Thanks,
Angela Shi
TechNet Community Support

Primary Surface Test Failed

I recently purchased a brand new Lenovo T61 Notebook from Lenovo and downloaded the Lenovo System Toolbox. After running the Diagnotics, the Primary Surface Test Failed under the category Video Nvidia Quadro. The notebook was purchased with a Discrete Graphics Card. Tech Support was contacted after the failure who stated that it could be a bad video card or simply nothing. Tech Support also stated that it doesn't appear that I have a Discrete Graphics Card and that the card is built into the motherboard. The graphics on the screen appear to be fine. It is still under warranty.
1. How do I determine if a Discrete Video Card was installed without opening the cover? I paid extra for the Discrete Video Card.
2. Does anyone understand what the Primary Surface Test is because the Lenovo Tech Support seemed to be questioning their answers by asking me what I thought. This did not give me total confidence in the Lenovo Support.
Thanks!
KALNH

I have the same failure with the latest version of PCDoctor on my T60p. using a FireGL V5250. This appears to be a new subtest of the adaptor as the version of PCDoctor shipped on my machine runs without error also the current Dos version does not report an error.
I guess it's another Lenovo validation problem. (This really 'turns me off') hopefully it maybe fixed in a future update. (at least they could warn users that the latest version of PC-Doctor may (?) report errors if run on older hardware (System Update)
I have no other problems with the video card running under XP so I guess I can ignore it for now.
I note that the original post on this thread was using a different Video Adaptor so the problem would seem to be a PC-Doctor related problem.
On further investigation I find that this Primary Surface test will run without error with the adaptor colour quality set at the highest setting (32 bit)on my FireGL video Adaptor...... HTH
Message Edited by DaveS on 01-15-2009 10:38 PM

Workflow configuration error - System Account connection test failed

Hi,
Has anybody faced a problem with Workflow configuration? The version we are using is 2.6.2 on Oracle database 9.2.0.5 on AIX5L. The workflow installation from 9.2.0.1 installation CDs goes through without any problem. But when the workflow configuration tool comes up it fails with the following error.
"SYSTEM account connection test failed".
The system and sys accounts are fine as verified by sqlplus. Any help is greatly appreciated.
The log file is shown below.
Workflow Configuration Assistant-AIX
WorkflowCA:
WorkflowCA: Workflow Configuration in progress...
WorkflowCA:
WorkflowCA: Screen width -2304-, screen height -1024-
WorkflowCA: Graphics User Interface mode
WorkflowCA:
WorkflowCA: Language - US
WorkflowCA:
WorkflowCA: Start testing connection, which takes less than 3 minutes.
WorkflowCA:
WorkflowCA: Account connection test for SYSTEM
WorkflowCA: SQL Thread: Thread[TstSQL,5,main]
WorkflowCA: chkSQL: true
WorkflowCA: cmdLine: /app/oracle/product/9.2.0/bin/sqlplus system/<Masked Password> @/app/oracle/product/9.2.0/wf/sql/wftstcon.sql
WorkflowCA: envVar[0]: -ORACLE_SID=rsdb-
WorkflowCA: envVar[1]: -ORACLE_HOME=/app/oracle/product/9.2.0-
WorkflowCA: envVar[2]: -WF_RESOURCES=/app/oracle/product/9.2.0/wf/res/wfus.res-
WorkflowCA: envVar[3]: -TZ=EST5EDT-
WorkflowCA: envVar[4]: -WF_NLS_LANG=AMERICAN_AMERICA.WE8ISO8859P1-
WorkflowCA: envVar[5]: -PATH=/app/oracle/product/9.2.0/bin:/app/oracle/product/9.2.0/lib:$PATH-
WorkflowCA: envVar[6]: -LD_LIBRARY_PATH=/app/oracle/product/9.2.0/lib-
WorkflowCA: envVar[7]: -WF_TNS_ADMIN=/app/oracle/product/9.2.0/network/admin-
WorkflowCA: envVar[8]: -WF_SHLIB_PATH=/app/oracle/product/9.2.0/lib-
WorkflowCA: Exit Val : 126
WorkflowCA: chkSQL is alive after 1 seconds: false
WorkflowCA: SYSTEM account connection test failed.
WorkflowCA: Terminating...
Thanks,
Chethan

We had this problem on 2 machines.
On the 1st machine, we tried the local install option after a few days (Local option with no connect string) and it worked with no problems!
On the 2nd machine, we could never get it to work even after opening a tar with Oracle. Finally we did a remote install from the 1st machine into the database on the 2nd machine. During the remote install while running wfinstall on the 1st machine, we just had to choose the remote option and the database service name for the connect string.
Thanks,
Chethan

Installing update 118833-23 Failed

Hi All!
118833-23 has a problem on Solaris 10 with zones:
# init 6
# svc.startd: The system is coming down. Please wait.
svc.startd: 80 system services are now being stopped.
Installing update 118833-23 Failed
> less disallowed_patch_list_report
Patching zone zproxy
Booting non-global zone zproxy for patching...
Adding patches...
Executing prePatch script...
Checking installed patches...
Executing prepatch script...
Verifying sufficient filesystem capacity (dry run method)...
Installing patch packages...
Pkgadd failed. See /var/tmp/118833-23.log.5413 for details
Removing partially installed patch
Validating patches...
Loading patches installed on the system...
Done!
> tail /export/zones/zproxy/root/var/tmp/118833-23.log.5413
Installation of <SUNWnfsckr> was successful.
This appears to be an attempt to install the same architecture and
version of a package which is already installed. This installation
will attempt to overwrite this package.
pkgadd: ERROR: unable to create unique temporary file </etc/fs/nfs/mount5Ia4ty>: (30) Read-only file system
Installation of <SUNWnfscr> partially failed.
> cat /etc/release
                       Solaris 10 1/06 s10s_u1wos_19a SPARC
           Copyright 2005 Sun Microsystems, Inc. All Rights Reserved.
                        Use is subject to license terms.
                           Assembled 07 December 2005

This patch has been obsoleted by 118833-24. Can you
install the later revision and let us know if you see
the same problems?turning back to the problem of 118833+zones: if I try to install the -24 or -23 in milestone single-user I have the old problem: pkgadd: ERROR: unable to create unique temporary file </etc/fs/nfs/mount5Ia4ty>: (30) Read-only file system in the zones. I assume, the patchadd starts the zones and not waits until the zone is online. On the old slow hardware it can bring this error message and, at least, the /etc/fs/nfs/mount will not be updated.
The workaround is not to install this patch automatically, start zones with boot -s, wait, until they are ready and then apply this patch. It's probably not very bad idea to start all active zones first and then apply patches. It spares time on slow and not very slow systems.
Tested on
# prtdiag
System Configuration: Sun Microsystems sun4u Sun Ultra 5/10 UPA/PCI (UltraSPARC-IIi 333MHz)
System clock frequency: 111 MHz
Memory size: 512 Megabytes
========================= CPUs =========================
                    Run   Ecache   CPU    CPU
Brd CPU   Module   MHz     MB    Impl.   Mask
0     0     0      333     2.0   12       1.3
========================= IO Cards =========================
     Bus# Freq
Brd Type MHz   Slot Name                              Model
0   PCI-1 33     1   ebus
0   PCI-1 33     1   network-SUNW,hme
0   PCI-1 33     2   SUNW,m64B                         ATY,GT-C
0   PCI-1 33     3   ide-pci1095,646
0   PCI-2 33     1   scsi-glm                          Symbios,53C875
0   PCI-2 33     1   scsi-glm                          Symbios,53C875
0   PCI-2 33     2   pci-pci8086,b154
No failures found in System
===========================
# cat /etc/release
                       Solaris 10 1/06 s10s_u1wos_19a SPARC
           Copyright 2005 Sun Microsystems, Inc. All Rights Reserved.
                        Use is subject to license terms.
                           Assembled 07 December 2005
# uname -a
SunOS app02 5.10 Generic_118833-24 sun4u sparc SUNW,Ultra-5_10
# smpatch analyze
119252-13 SunOS 5.10: System Administration Applications Patch
124171-01 SunOS 5.10: flash issue with SUNWscn-base due to broken package
124327-01 SunOS 5.10: libpcp patch
123252-01 SunOS 5.10: platform/SUNW,Netra-T2000 patch
119280-07 CDE 1.6: Runtime library patch for Solaris 10Message was edited by:
v0vik
I tested the installation of 118833-24 with smpatch update; init 6 too.

[OIM] OIM 11 install - CFGFWK-60850: Test Failed

Similar Messages

Maybe you are looking for