OIM Password Sync Installation on Windows Core Server 2008

Hi,
Did anyone ever installed AD Password Sync connector on windows core 2008 server, please provide the steps for that?
Server Core doesn't have GUI, it uses command prompt to install. I tried to installed but it corrputed the server itself.
Please let me know if anyone has prior experience on that.
Thanks,
Amitesh

Hi,
Yes in Browser, the response is perfect. The only issue is in Calling inside in any file, i even tried Javascript's XML dom to load it, but same result, the file is just loading and never loads completely. I also tried using an SWF file with AS3 code to load XML inside as3 and send the result to any JS function.
The output comes using trace in as3, but when it comes to browser, the same loading happends and result never loads.

Similar Messages

Error Installing AD Password sync connector in windows 2008

HI,
i am trying to install AD Password sync connector in windows 2008 but i am getting following error.
**Error occurred while uploading prepAD.ldif. , please refer to %TEMP%\oimpwdsync.log. Please upload**
**prepAD.ldif to Active Directory Domain Controller before applying ACLs.**
Thanks,

Dont do any thing. just restart your machine,a dn re-configure, because first time passwordsync10.dll has not initialized on AD machine. after that just put same parameter value what you have given previously. it will work
same time verify if AD Authentication or xelsysadm Authentication is wrong

Windows Storage Server 2008 R2 Essentials connecting with Launchpad on Mac OS 10.9.2

Note: Note to moderators, I accidentally submitted this to Windows Small Business Server Forums. If someone could move this thread to the appropriate directory would be much appreciated.
Hello we have a client which has a Mac OSX 10.9.2 and we are trying to connect the Mac Launchpad to the Mac. We have a VPN set up and it is working correctly so we connect to the server by using servername:65510/connect/ this brings us up with the correct
screen and prompts us to download software for mac, when opening we can get to the mac connector and we go through all the setup however when we reach "User Credentials" and we enter the correct password it comes up saying "Cannot connect to
the server using the name that was entered. Check if the specified value is correct and try again." We have set up macs before using this software the only difference is this is the first Mac which has been on OSX 10.9 Mavericks.
We have spent countless hours diagnosing and looking into all the possible reasons this could be and the only conclusion is that it must either be a software glitch on the Mac or on the server itself. I was doing some research and found a thread by a user
named
ZconR on Monday, January 14, 2013 6:08 PM
"This is apparently a problem with Update Rollup 4 for the server. If you remove this update it will allow you to move forward
with the installation of the MAC connector software using Admin credentials. Hope this helps. (It seems you can apply the update after the software installs and everything should continue to work.)"
This would fit in perfectly with our problem and I could not find any sources to confirm this information. Can anyone confirm if this is issue is correct and if uninstalling Rollup 4 will make this work?

Hi James,
Based on your description, I can find a known issue for this
Update Rollup 4. Please check if fit the current situation of your problem. Descript as below:
You cannot install this update by using a Mac client connector that has Update Rollup 4 for Windows Storage
Server 2008 R2 Essentials installed. This issue occurs because of a change requirement for Mac external binaries. To work around this issue, reinstall the Mac client connector before you install Update Rollup 4.
Note: This issue only occurs on a server that has Update Rollup 3 for Windows Storage Server 2008 R2 Essentials
installed.
By the way, did
you install the Mac client connector by using administrator account?
Hope this helps.
Best regards,
Justin Gu

Windows Storage Server 2008 R2 Essentials - Office365 Addon

Hi there,
Sorry for the strange request. I have a few of these "Windows Storage Server 2008 R2 Essentials" in the field(Provide by WD - DX4000). Now
a few months (maybe always a year + Now), I was able to find and possible download the Office365 Add-on for Windows
Storage Server 2008 R2 Essentials. It should be the same as Small Business Server 2011 Essentials.
I found a bunch of links to and that talk about the UP4 having it built in. But I can't find anything or any links to download the addon. So unless I'm missing something, I can't seem to find it for the Windows
Storage Server 2008 R2 Essentials. Now maybe I'm the only person in NA that is looking for this, but my clients are moving to Office365 and it would be nice to have all the username and passwords the same.
Now as i write this I'm think that the SBS 2011-E is built on a domain where WSS is under WorkGroup. So maybe that's why its not available much.
Any thoughts, or if someone has a copy of a latest add-on and want to upload it here, that would be nice.
Kevin

Dear Sir
I believe you are mistaken. When SBS 2011 Essentials came to market there was no integration between Office 365 and the Actual Server Dashboard. (It was not ready at the time the Server went RTM).
At the end of 2011 the Office 365 team released the so-called Integration Module for SBS 2011 Essentials with office 365 as it is noted at the following Blog post:
http://blogs.technet.com/b/sbs/archive/2011/12/22/office-365-integration-module-for-windows-sbs-2011-essentials-released-today.aspx
This integration module later was included in a UR Package (UR2 if i correctly remember) so you didn't had to installed it separately. That is the reason that you cannot find the original Download today. More info at the following:
http://support.microsoft.com/kb/2630429/en-us
To concludethere wasn't a Office 365 Integration Module for Storage Server 2008 R2 Essentials ONLY for SBS 2011 Essentials.

Windows Storage Server 2008 R2 Essentials SP1 64 bit Event 55 NTFS and shadowcopy failure

Windows Storage Server 2008 R2 Essentials SP1 64 bit Event 55 NTFS and shadow copy failure.
I have tried deleting shadow copy volumes and chkdsk /f /r, but I always get the following when trying to backup the server:
Event 55 NTFS
The file system structure on the disk is corrupt and unusable. Please run the chkdsk utility on the volume \Device\HarddiskVolumeShadowCopy1.
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Ntfs" />
<EventID Qualifiers="49156">55</EventID>
<Level>2</Level>
<Task>2</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-11-20T09:28:52.255947800Z" />
<EventRecordID>158182</EventRecordID>
<Channel>System</Channel>
<Computer>SERVER1</Computer>
<Security />
</System>
- <EventData>
<Data />
<Data>\Device\HarddiskVolumeShadowCopy1</Data>
<Binary>0D000C000200380002000000370004C000000000020100C000000000000000000000000000000000804503000900000000000900</Binary>
</EventData>
</Event>
3/20/2014 9:00 PM,EFI System Partition, Local disk (C:), Local disk (D:),SERVER1 2013_06_12 21:24 DISK_01
(\\?\Volume{02c22814-d3a1-11e2-84f4-0090a9ba53a1})
Faulting application name: wbengine.exe, version: 6.1.7601.17514, time stamp: 0x4ce79951
Faulting module name: ntdll.dll, version: 6.1.7601.18247, time stamp: 0x521eaf24
Exception code: 0xc0000374
Fault offset: 0x00000000000c4102
Faulting process id: 0x1c90
Faulting application start time: 0x01d004e8c00b9d9e
Faulting application path: C:\Windows\system32\wbengine.exe
Faulting module path: C:\Windows\SYSTEM32\ntdll.dll
Report Id: cb4c54ab-70dd-11e4-bbe2-0090a9b7bb8d
The Block Level Backup Engine Service service terminated unexpectedly. It has done this 1 time(s).
Additional Server Information:
OS Name Microsoft Windows Storage Server 2008 R2 Essentials
Version 6.1.7601 Service Pack 1 Build 7601
Other OS Description Not Available
OS Manufacturer Microsoft Corporation
System Name SERVER1
System Manufacturer To be filled by O.E.M.
System Model WDBLGT0040KBK-21
System Type x64-based PC
Processor Intel(R) Atom(TM) CPU D525 @ 1.80GHz, 1795 Mhz, 2 Core(s), 4 Logical Processor(s)
BIOS Version/Date American Megatrends Inc. 4.6.4, 10/18/2011
SMBIOS Version 2.7
Windows Directory C:\Windows
System Directory C:\Windows\system32
Boot Device \Device\HarddiskVolume1
Locale United States
Hardware Abstraction Layer Version = "6.1.7601.17514"
User Name Not Available
Time Zone Eastern Standard Time
Installed Physical Memory (RAM) 2.00 GB
Total Physical Memory 1.99 GB
Available Physical Memory 537 MB
Total Virtual Memory 5.96 GB
Available Virtual Memory 2.95 GB
Page File Space 3.97 GB
Page File C:\pagefile.sys
I thought this might apply to my server: KB2754784
But my event 55 alerts only happen when windows backup attempts to create a shadow copy on a drive volume created for backups.
We use to be able to backup the EFI, C, and D partitions in the past. After a hardware failure and Motherboard replacement and a system restore, we can no longer backup the volumes without the Windows Block Level Backup Engine Service service terminated
unexpectedly and Event 55 NTFS.
How can I fix this issue?

Hi,
The issue could be due to the shadow copies on the backup volumes are corrupt. You could try to delete these shadow copies to check if the issue still exist.
For more detailed information, please see:
2008R2 Backup causing Event 55 NTFS Errors
https://social.technet.microsoft.com/Forums/windowsserver/en-US/5cbed1b1-63e3-4c15-8fff-b48746d5ba44/2008r2-backup-causing-event-55-ntfs-errors
You could refer to the article below to delete shadow copies:
Backup Version and Space Management in Windows Server Backup
http://blogs.technet.com/b/filecab/archive/2009/06/22/backup-version-and-space-management-in-windows-server-backup.aspx
Best Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Admin Commands issue on Windows Web Server 2008 R2 - 64Bit

Hi,
I have tried exactly same process on FMS3.5 Installed on Centos and it worked perfectly.
But not working in case of Windows Web Server 2008 R2 - 64Bit.
Here is what i am trying to do -
Basically i want to extract live streams list and display them in HTML as ordered list on another server them FMS.
What i did in the case of FMS on Centos server -
I installed Apache and PHP on this server and created a PHP file with following text in it. -
abc.php
   $xml = simplexml_load_file('http://<fms-server-ip>:1111/admin/getLiveStreams?auser=admin&apswd=password&appInst=live','Simple XMLElement', LIBXML_NOCDATA);
foreach($xml->children() as $child)
   foreach($child->children() as $child2)
          echo $child2 . ",";
and in hosting server where i want to display the list i entered following code in PHP file -
$homepage = file_get_contents('http://<fms-server-ip>/abc.php');
echo $homepage;
i got comma seperated values easily and everything is loading fast without any issue.
Now problem occured with Windows Web Server 2008 R2 - 64Bit.
I installed FMS, Apache and PHP in this server also, did evrything in the same way like in centos.
FMS, APache and PHP files are working fine in this.
But only problem occured when in abc.php i use
$xml = simplexml_load_file('http://<fms-server-ip>:1111/admin/getLiveStreams?auser=admin&apswd=password&appInst=live','Simple XMLElement', LIBXML_NOCDATA);
After this file do not loads and takes longer time to load and after some time a blank page appears. It works fine with a local XML file.
i am able to see the XML file by opening it directly in browser, but somehow this is not working with   simplexml_load_file. I dont think this is PHP issue because with local XML file it works fine. May be some port issue or something else. But i am able to view XML file directly in browser from another computers as well.
Kindly help, is there some other configurations should be changed in case of windows version. I have allowed admin commands as usual before doing all this. Ports 1111,80,1935 are also opened.
Please guide

Hi,
Yes in Browser, the response is perfect. The only issue is in Calling inside in any file, i even tried Javascript's XML dom to load it, but same result, the file is just loading and never loads completely. I also tried using an SWF file with AS3 code to load XML inside as3 and send the result to any JS function.
The output comes using trace in as3, but when it comes to browser, the same loading happends and result never loads.

Problem with Windows Vista Server 2008 - Font characters replaced with square blocks on login screen

Hi! Last week, I set up a server for a client (Windows Vista Server 2008). Everything was working fine until this week when I did a remote login, and the server's screen shows all blocks instead of character (ie. "Administrator" shows up as Rectangular blocks) - and when I type in the password box, my characters come out the same blocks. The computer lets me login like this but then when the desktop displays, all texts is Blocks - like the windows default font is missing.
Anybody else run into this mystery and is there a fix?
Thanks.

Hello,
Based on my experience, this issue might be caused by compatibility issues of video card driver and language options settings.
I’d like to suggest you try the following steps to fix the issue.
1.    Please check whether you have installed correct video card drivers on both client and server machines. You’d better download the latest drivers from Video card manufacture and reinstall the drivers on both of the machines.
2.    Please confirm whether the regional and language options settings on client and server machines are the same. If not, please temporarily change the settings on two machines to be the same and have another test.
3.    If you use some third-party remote desktop connection tools to connect to the server, please have another try with Windows build-in remote desktop connection.
I hope this helps, thanks.
Regards,
Neo Zhu

How to install KB2950358 on Windows STORAGE Server 2008 R2?

Hello
I am experiencing the exact issue described
here on my WD Sentinel DX4000 nas box which runs Windows Storage Server 2008 R2. This is causing regular crashes and reboots and general unreliability when the memory leak causes all ram to be used up and the CPU is constantly running at 100% which both
increases electricity usage and shortens the lifespan of the system.
I have downloaded the hotfix on that KB article but it refuses to install claiming that it is not compatible. When the underlying Windows Server 2008 R2 OS is the same how can it not be compatible? My theory is that the Storage server version is only used
and available on a small handful of OEM devices and there's barely any information of it on the internet so I think Microsoft have forgotten to add it to the compatibility list for this particular hotfix.
After weeks of searching, I cannot find a way to force install the update. It's not a business-critical system and I've got backups of it so I am happy to try manual or risky efforts to get it installed. I have tried extracting the MSU file but that doesn't
give me any useful files to install it manually or skip the compatibility checks.
I've also tried to contact Microsoft directly but they don't even have Storage Server listed as an option on their support contact page so I've given up there, as a last resort I am hoping someone here can point me in the right direction. Other online forums
refuse to help saying it's too risky with a server but personally I want it installed and will try anything to do so because I've got a £1000 NAS sitting here that is unusable due to this issue. I'd rather not reinstall the OS as the problem reoccurs - I've
tried it already before I found this KB article.
Bottom line, Microsoft have identified the issue and released a hotfix, the server version IS supported, but was not added to the compatibility restrictions of the update so I cannot get the update installed.
Any advice gladly received. Hopefully someone from MS will see this and be able to update the compatibility of the hotfix if nothing else is possible.

I see SP1 is a prerequisite. Also the manufacturer may have specific patch procedures or recommendations so I'd probably contact them directly.
http://support.wdc.com/product/install.asp?wdc_lang=en&fid=wdsfWDSentinel
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Auditing failed access to files and folders in Windows Storage Server 2008 R2

Hello,
I've been trying to figure out why I cannot audit the failed access to files and folders on my server. I'm trying to replace a unix-based NAS with a Windows Storage Server 2008 R2 solution so I can use my current audit tools (the 'nix NAS
has basically none). I'm looking for a solution for a small remote office with 5-10 users and am looking at Windows Storage Server 2008 R2 (no props yet, but on a Buffalo appliance). I specifically need to audit the failure of a user to access
folders and files they are not supposed to view, but on this appliance it never shows. I have:
Enabled audit Object access for File system, File share and Detailed file share
Set the security of the top-level share to everyone full control
Used NTFS file permissions to set who can/cannot see particular folders
On those folders (and letting those permissions flow down) I've set the auditing tab to "Fail - Everyone - Full Control - This folder, subfolders and files"
On the audit log I only see "Audit Success" messages for items like "A network share object was checked to see whether client can be granted desired access (Event 5145) - but never a failure audit (because this user was not allowed access by NTFS permissions).
I've done this successfully with Windows Server 2008 R2 x64 w/SP1 and am wondering if anybody has tried this with the Windows Storage Server version (with success of course). My customer wants an inexpensive "appliance" and I thought this new
variant of 2008 was the ticket, but I can't if it won't provide this audit.
Any thoughts? Any of you have luck with this? I am (due to the fact I bought this appliance out of my own pocket) using the WSS "Workgroup" flavor and am wondering if this feature has been stripped from the workgroup edition of WSS.
TIA,
--Jeffrey

Hi Jeffrey,
The steps to setup Audit on a WSS system should be the same as a standard version of Windows Server. So please redo the steps listed below to see if issue still exists:
Enabling file auditing is a 2-step process.
[1] Configure "audit object access" in AD Group Policy or on the server's local GPO. This setting is located under Computer Configuration-->Windows Settings-->Security Settings-->Local Policies-->Audit Policies. Enable success/failure auditing
for "Audit object access."
[2] Configure an audit entry on the specific folder(s) that you wish to audit. Right-click on the folder-->Properties-->Advanced. From the Auditing tab, click Add, then enter the users/groups whom you wish to audit and what actions you wish to audit
- auditing Full Control will create an audit entry every time anyone opens/changes/closes/deletes a file, or you can just audit for Delete operations.
A similar thread:
http://social.technet.microsoft.com/Forums/en-US/winserverfiles/thread/da689e43-d51d-4005-bc48-26d3c387e859
TechNet Subscriber Support in forum |If you have any feedback on our support, please contact [email protected]

Window SBS server 2008 and window server 2008 R2 on the same domain

Hi all,
I am a person only work for linux system. Recently i work for my company that using microsoft technologie. So i have a lot of trouble. Could you please help me and below are my big troble that i have met:
In my system, i have the first window SBS server 2008 run on our domain. However my organization growth up and we have more than 150 users and mailbox of exchange server 2007. So i do not want to use my sbs server 2008 anymore.
I am going to install a window server 2008 R2 64 bit and join it into the same domain with sbs server 2008. It will be replicate the username, dns, OU and group policy...After that i will tranfer FSMO role to new server and i will demote then remove the
sbs server.
My boss say that i should not use this solution because window server sbs can not run with any other kinds of window server 2008 (R2, standard, enterprise...) and it will automatically shutdown the main server after a couple of days.
Someone have experience can help me. I am so confuse now

Maybe this will also help to better understand the steps involved:
Transition from Small Business Server to Standard Windows Server
http://blogs.technet.com/b/infratalks/archive/2012/09/07/transition-from-small-business-server-to-standard-windows-server.aspx
Migrating away from SBS 2011
http://social.technet.microsoft.com/Forums/en-US/07c58cc4-7d6d-419a-b1a0-439c2cc0c48d/migrating-away-from-sbs-2011?forum=smallbusinessserver
Migrating from SBS 2008 to Windows Server 2012 R2 (NOT Essentials and with NO Exchange)
http://social.technet.microsoft.com/Forums/en-US/1276d2d3-a8f2-4786-82f3-4308a2affb11/migrating-from-sbs-2008-to-windows-server-2012-r2-not-essentials-and-with-no-exchange?forum=smallbusinessserver
And remember, as long as you don't move the PDC to one of the new DCs, you can leave the SBS 2008 up indefinitely. But I would remove Exchange 2007 off it right away once I've migrated the mailboxes and public folders, otherwise
you will get yourself into an Exchange coexistence scenario which is much more complex to configure and support because of the CAS differences, changing the URLs on the old one to "legacy.domain.com," getting a new UC/SAN cert with the correct
names on it, and more. Believe me, you really don't want to coexist them. The only time I've coexisted Exchange versions is during large migrations, such as 500 or more. Otherwise, I just migrate the mailboxes over a weekend and get it done with.
Ace Fekay
MVP, MCT, MCSE 2012, MCITP EA & MCTS Windows 2008/R2, Exchange 2013, 2010 EA & 2007, MCSE & MCSA 2003/2000, MCSA Messaging 2003
Microsoft Certified Trainer
Microsoft MVP - Directory Services
Complete List of Technical Blogs: http://www.delawarecountycomputerconsulting.com/technicalblogs.php
This posting is provided AS-IS with no warranties or guarantees and confers no rights.

Cannot Install PB Runtime 12.0 or 12.5 on Windows 8 Server 2008 R2

Greetings All!!
I am trying to set up a new server for deployment and when I run either the PB Runtime for 12.0 or 12.5 I get an error stating (in general) module pbjvm120.dll failed to register.
I am also having this problem with another Windows 2008 Server install. I had to move on with the last one, but I need this one up and running now so I am asking for advice/help.
I attached a screenshot of the error.
Thanks all!!
Best,
Paul

Thanks Gentlmen!!
I don't know how the '8' in Windows 8 Server 2008 R2 got in there, but it is just Windows Server 2008 R2.
I copied msvcr71.dll , msvcp71.dll and atl71.dll to the c:\windows\system32 directory. Tried again and got the same error as shown in my screenshot. This 'is' a VM. I am logged into the machine as Administrator.
Chris, what do you mean by official MR?
I am creating the runtime files using the PB Runtime Packager.
Thank you!!
Paul

Is it safe to delete CiFiles folder on Windows storage Server 2008

Hi Team,
.ci file growing in "C:\Documents and Settings\All Users\Application Data\Microsoft\Search\Data\Applications\Windows\Projects\SystemIndex\Indexer\CiFiles" location. Is it safe to delete the CI file. please let me know, any other way to disable
the growth of CI files.
What is the route cause? This is file server using windows storage server 2008 OS.
How to avoid in future this type of issue?
My total hard disk size 80 GB but now free space only 110 Almost full my hard disk. So please help to advise how to clear
all ci files?
Thanks in advance

Hi,
When you use indexing service, the service create .ci files. The files are content index files on the server. As long as the service is not running you should not encounter any problems if you delete the folder.
Is it safe to delete CiFiles folder on Windows Server 2008 R2
http://www.wincert.net/tips/windows-server/1948-is-it-safe-to-delete-cifiles-folder-on-windows-server-2008-r2
Please Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Oracle EBS R12 intalltion on Windows Web Server 2008 R2

hi ,
Am planning to install intially oracle EBS R12 in windows web server 2008 R2.
Is this OS supported by oracle? Did anybody already done this ?
also later am planning to install OBIA + OBIEE stack on this. will all these
supported on windows web server 2008 R2?
Please provide your suggestions.
which windows version is stable to have EBS R12 + OBIA + OBIEE.
thanks

Hi Srini;
Duplicate post - Oracle EBS R12 intalltion on Windows Web Server 2008 R2
Dont you have admin right? You could delete duplicate which pretend to open same question more than one place and also it could hold clear to open question interface on main related forum part
Regard
Helios

Active directory recycle bin in Windows STORAGE server 2008 R2

I'd like to find a tool that helps me to monitor deleted server files. I understand that this tool is called Active directory recycle bin. I can't enable it. I can't even open lpd.exe. I'm using Windows storage server 2008 r2 essentials. Could someone
help me with that? Thanks in advance.

In that case you must use a solution which combines Auditing
and Backup solutions. Just to know who has deleted a file or folder does not really help you. You must be able to restore the deleted file or folders.
If you need to find out at what time who deletes what file you should use auditing. Normally organizations enable auditing on sensitive data and folders to keep track who touches the stuff. Auditing is enabled in windows and by the administrator. Take a
look at the below links if you want to enable auditing on files and folders:
Use auditing to track who deleted your files
However do not forget that you need to have backup solutions in order to restore a deleted file in case someone accidentally or intentionally deletes a file or folder. Using System Restore with Previous Version feature may comes handy if you are dealing
with small number of computers. Otherwise you need to prepare yourself for a backup plan using Data Protection Manager as Denis mentioned or Windows Backup role (WBadmin) including in Windows Server 2008. More info on links below. I have included a video of
how to recover lost data using previous versions for you.
Recover lost or deleted files (Video)
Windows Server Backup Step-by-Step Guide for Windows Server 2008
Regards.
Mahdi Tehrani |
|
www.mahditehrani.ir
Please click on Propose As Answer or to mark this post as
and helpful for other people.
This posting is provided AS-IS with no warranties, and confers no rights.
How to query members of 'Local Administrators' group in all computers?

Windows Storage Server 2008 R2 Using 4TB hard disk

Hi, I have a HP X1600 G2, then I bought 12 x 4TB hard disk for increasing the disk space for this unit.
What I want to do is using the hardware array to configure the following:
3 x 4TB RAID-5 plus 1 Spare to create 3 Logical Drives.
Then Spanned set it to a total of 24TB drive within the system.
Is it going to be work, or not?
As I read the article
http://technet.microsoft.com/en-us/library/cc773268(v=ws.10).aspx
Said to use 2TB drive to be able to get a 64TB in total.
Thanks in advance, Fortuno

Thanks Shaon,
Yes, after I setup on the RAID controller, with GPT on the hard disk, I am able to create the spanned set for 24TB on the Windows Storage Server 2008 R2 that comes with the unit.
Thanks again!

OIM Password Sync Installation on Windows Core Server 2008

Similar Messages

Maybe you are looking for