OIM Reconfiguration with new Schema

Hi All,
I have OIM, OAM 11g R1 installed in a single Domain, IAMDomain. I want to reconfigure the existing OIM with new schema, so are below steps correct for reconfiguring of OIM:
1. Drop the existing OIM Schema (DEV_OIM, DEV_SOAINFRA,DEV_ORASDPM) except DEV_MDS and DEV_OPSS as I guess they are being used by OAM also.
2. Create the OIM Schema (DEV_OIM, DEV_SOAINFRA & DEV_ORASDPM).
3. Reconfigure the OIM using $ORACLE_HOME/bin/config.sh
Regards,
Sunny

Yes, you can reconfigure an existing domain.

Similar Messages

How APEX work with New Schema

Hello,
I have APEX installed already in my database and currently it's catering 2 schemas, say schema1 and schema2. Schema2 has been dropped now and new Schema3 has been created.
I changed dads.conf file and pointed to new schema, Schema3, restarted HTTP server but when trying to access URL I am getting
Error 403: Forbidden
You don't have permission to access /pls/apex_1/apex_admin on this server.
Also upon checking the log file, i could see ORA-1017 error which means apex_public_user doesn't exist in Schema3. So just wondering do I need to go for another installation of APEX or there is other better alternative.
Regards
Pankaj

Hello Jari,
I think my last post was not that clear. Here I am not referring to apex internal schemas.
Below is dads.conf which includes two different database, database1 and database3(new).
APEX url for database1 is working fine but I am getting error 403 for database3 as it's newly created.
So My question is how an existing APEX configuration works for new Database.
+<Location /pls/apex_1>+
Order deny,allow
PlsqlDocumentPath               docs
AllowOverride                   None
PlsqlDocumentProcedure          wwv_flow_file_mgr.process_download
PlsqlDatabaseConnectString      sweden.intranet.calidris.com:1521:database1
PlsqlNLSLanguage                AMERICAN_AMERICA.AL32UTF8
PlsqlAuthenticationMode         Basic
SetHandler                      pls_handler
PlsqlDocumentTablename          wwv_flow_file_objects$
PlsqlDatabaseUsername           APEX_PUBLIC_USER
PlsqlDefaultPage                apex
PlsqlDatabasePassword           Abc12345
PlsqlRequestValidationFunction wwv_flow_epg_include_modules.authorize
Allow from all
+</Location>+
+<Location /pls/apex_2>+
Order deny,allow
PlsqlDocumentPath               docs
AllowOverride                   None
PlsqlDocumentProcedure          wwv_flow_file_mgr.process_download
PlsqlDatabaseConnectString      sweden.intranet.calidris.com:1521:database3 ++
PlsqlNLSLanguage                AMERICAN_AMERICA.AL32UTF8
PlsqlAuthenticationMode         Basic
SetHandler                      pls_handler
PlsqlDocumentTablename          wwv_flow_file_objects$
PlsqlDatabaseUsername           APEX_PUBLIC_USER
PlsqlDefaultPage                apex
PlsqlDatabasePassword           Abc12345
PlsqlRequestValidationFunction wwv_flow_epg_include_modules.authorize
Allow from all
+</Location>+
regards
}ankaj

Reconfiguration with new SQL database

Hi all,
We just changed our database SQL in our EPM 11.1.1.3 platform.
I guess I need to reconfigure Shared Services and Essbase.
I can't configure Shared Services on the new SQL database with the error message "The port 28080 is already in use".
The log message is :
(Sep 12, 2011, 00:17:33 PM), com.hyperion.cis.config.wizard.AppServerSelectionPanel, INFO, Server: Tomcat 5; deployment type = auto
(Sep 12, 2011, 00:17:33 PM), com.hyperion.cis.config.wizard.AppServerSelectionPanel, INFO, Server: WebLogic 9; deployment type = both
(Sep 12, 2011, 00:17:33 PM), com.hyperion.cis.config.wizard.AppServerSelectionPanel, INFO, Server: WebSphere 6; deployment type = both
(Sep 12, 2011, 00:17:33 PM), com.hyperion.cis.config.wizard.AppServerSelectionPanel, INFO, Server: Oracle 10g; deployment type = both
(Sep 12, 2011, 00:17:35 PM), com.hyperion.cis.config.wizard.AppServerSelectionPanel, INFO, AppServerSelectionPanel in queryExit
(Sep 12, 2011, 00:17:35 PM), com.hyperion.cis.config.wizard.AppServerSelectionPanel, DEBUG, AppServer selected: Tomcat 5
(Sep 12, 2011, 00:17:37 PM), com.hyperion.cis.config.wizard.AppServerDeploymentPanel, DEBUG, serverLocation:
(Sep 12, 2011, 00:17:37 PM), com.hyperion.cis.config.wizard.AppServerDeploymentPanel, DEBUG, Deploy component [0]: Shared Services
(Sep 12, 2011, 00:17:37 PM), com.hyperion.cis.config.wizard.AppServerDeploymentPanel, DEBUG, Server Name: SharedServices9
(Sep 12, 2011, 00:17:37 PM), com.hyperion.cis.config.wizard.AppServerDeploymentPanel, DEBUG, Listen Port: 28080
(Sep 12, 2011, 00:17:37 PM), com.hyperion.cis.config.wizard.AppServerDeploymentPanel, DEBUG, port in use error
Indeed when I look in the server, I see that the port is already used by SharedServices.exe. I suppose that's my first configuration...
How can I debug it ?
Thanks in advance

Now that's ok with the configuration, great !
But now, the Essbase service disappears of the list of the server and when I launch Essbase from the Program menu, nothing happens. The log is :
[Mon Sep 12 17:35:58 2011]Local/ESSBASE0///Error(1051223)
Echec de l'appel de la fonction d'authentification unique [css_init] avec l'erreur [CSS Error: CSS method invocation error: com.hyperion.css.CSSSystem.<init>]
[Mon Sep 12 17:35:58 2011]Local/ESSBASE0///Info(1051198)
Echec de l'initialisation de l'authentification unique
[Mon Sep 12 17:35:58 2011]Local/ESSBASE0///Info(1051232)
Utilisation de French_France.Latin1@Default comme environnement local Essbase
Have you any idea ?
Thanx.

ORA-19007 when coping a table with an xml type in it to a new schema in the

ORA-19007 when coping a table with an xml type in it to a new schema in the same database.
Hi all,
When I copy a table with an xml type in it to a new schema in the same database I get an ora-19009.
The setup is as follows I have a schema a with table TABLE_WITH_XMLTYPE where data is:
CREATE
TABLE TABLE_WITH_XMLTYPE
FOLDER_ID NUMBER (10, 0) NOT NULL,
SEARCH_PROPERTIES XMLTYPE ,
CONSTRAINT TABLE_WITH_XMLTYPE PK PRIMARY KEY (FOLDERID) USING INDEX
XMLTYPE COLUMN SEARCH_PROPERTIES XMLSCHEMA
"http://xxxxxxx.net/FolderProperties.xsd" element "FolderProperties"
VARRAY SEARCH_PROPERTIES."XMLDATA"."PROPERTIES"."PROPERTY" STORE AS TABLE
PROPERTY_TABLE
(PRIMARY KEY (NESTED_TABLE_ID, ARRAY_INDEX)) ORGANIZATION INDEX OVERFLOW
Both schemas have the following xml schema registered as a local xml schema
BEGIN
DBMS_XMLSCHEMA.registerSchema(
SCHEMAURL => 'http://xxxxxxx.net/FolderProperties.xsd',
SCHEMADOC =>
'<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema"
xmlns:xdb="http://xmlns.oracle.com/xdb"
xdb:storeVarrayAsTable="true">
<xs:element name="FolderProperties"
type="FolderPropertiesType"
xdb:defaultTable="FOLDER_SEARCH_PROPERTIES" />
<xs:complexType name="FolderPropertiesType" xdb:SQLType="FOLDERPROPERTIES_T">
<xs:sequence>
<xs:element name="FolderID" type="FolderIDType" minOccurs="1" xdb:SQLName="FOLDER_ID"/>
<xs:element name="Properties" type="PropertiesType" xdb:SQLName="PROPERTIES"/>
</xs:sequence>
</xs:complexType>
<xs:complexType name="PropertiesType" xdb:SQLType="PROPERTIES_T">
<xs:sequence>
<xs:element name="Property" type="PropertyType" maxOccurs="unbounded"
xdb:SQLName="PROPERTY" xdb:SQLCollType="PROPERTY_V"/>
</xs:sequence>
</xs:complexType>
<xs:complexType name="PropertyType" xdb:SQLType="PROPERTY_T">
<xs:sequence>
<xs:element name="DateValue" type="DateType" xdb:SQLName="DATE_VALUE"/>
<xs:element name="NumValue" type="NumType" xdb:SQLName="NUM_VALUE"/>
<xs:element name="StringValue" type="StringType" xdb:SQLName="STRING_VALUE"/>
</xs:sequence>
<xs:attribute name="Name" xdb:SQLName="NAME" xdb:SQLType="VARCHAR2">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:minLength value="1"/>
<xs:maxLength value="255"/>
</xs:restriction>
</xs:simpleType>
</xs:attribute>
</xs:complexType>
<xs:simpleType name="FolderIDType">
<xs:restriction base="xs:integer"/>
</xs:simpleType>
<xs:simpleType name="DateType">
<xs:restriction base="xs:dateTime"/>
</xs:simpleType>
<xs:simpleType name="NumType">
<xs:restriction base="xs:decimal"/>
</xs:simpleType>
<xs:simpleType name="StringType">
<xs:restriction base="xs:string" />
</xs:simpleType>
</xs:schema>',
LOCAL => TRUE,
GENTYPES => TRUE,
GENTABLES => FALSE);
END;
when I try to do the following insert:
insert into schemaB.TABLE_WITH_XMLTYPE ( FOLDER_ID, SEARCH_PROPERTIES)
select FOLDER_ID, SEARCH_PROPERTIES from schemaB.TABLE_WITH_XMLTYPE;
I’ll get an ora-19007.
Can some one point me in the right direction how to solve this error.
Thanks Roelof.

Who did you create the second table, in other words, how did you COPY the table as you said...
If you created the second table via a CTAS (create table as select) then you will have created a table that is not the same as the original one. AFAIK I have once created an enhancement request for this after discovering that JDeveloper, for example, creates a "copy" via a CTAS which creates the wrong structure. Double check via package DBMS_METADATA.
SQL> set long 1000000
SQL> select DBMS_METADATA('TABLE','TABLE_WITH_XMLTYPE','SchemaA') from dual;
SQL> select DBMS_METADATA('TABLE','TABLE_WITH_XMLTYPE','SchemaB') from dual;If you have got two different tables, than Mark's solution should help.
M.
Edited by: Marco Gralike on Feb 15, 2009 11:16 AM

Can we add new condition in old PO with new pricing schema

We have created new pricing schema for addition of new condition type at header level on
25/11/2010 in client server but the problem is for old purchase order client want new condition
on header condition tab.It is obvious that in old po on analysis tab it shows old pricing schema.
Is there any solution to get new condition in old Purchase order????
It means we can add new condition in old po???
Regards
Jyoti Thakur

Jyoti,
Let me know the basic Price Condition if its PB00 or PBXX.
Let me know how you have called the pricing schema. if you had attached it with document type and you have changed the document type, you will be required to create new PO with new doc type.
If you have taken Vendor Schema group as a criteria, then you will be required to end the validity of old pricing conditions in condition table and need to activate new conditions on this date.
Check for other basic keys like Purchasing Organization as well.
Let me know if you have any existing Source List or QA for the vendor too.
Thanks and Regards
Raghavan

Oracle APPS schema copy with all privileges to new schema and table space

Hi all,
Here is scenario:
I have installed e-business suite in windows 2003 server for training environment using production (prod), single node and without vision (demo).
i have to create a new table space in e:\oracle\prodmanz with similar content as in proddata and create a new schema called manz with same privileges as APPS.
Kindly advice.
Manish Kumar Chudasama
email: [email protected] cc to [email protected]
Thanks in advance guys.

Hi Khalid,
Ideally when you execute sql 'create schema <schema_name>' then the logged in user is going to default owner of the schema and you should see that under 'object privileges' of that user.
The user will have 'create any' privileges which means the user has all the privileges on that schema.
if you want to check who is owner of the schema in the system, please check 'SCHEMAS' under views in SYS.
Regards,
Venkat N.

Importing into a new schema with new logical structures

Hi,
I need to export an existing schema from a 9.2.0.3 database into a new schema ( all the objects into a different tablespace - tables & indexes ; from the original config ) within the same DB.
I am thinking of the following approach :
1. Export the original schema.
2. Create new tablespaces for the "new schema" tables and indexes.
3. Create an indexfile ; renaming the older tablespaces / usernames.
4. Create the new user and grant appropriate privileges.
5. Login as the new user and run the indexfile
Am I missing out any vital points ? Would the pl/sql structures associated with the schema be imported in ok ? Any associated complications that I should be prepared for ?
Unfortunately there isnt a test server in place to test it out before hand.
Please advice.

You missed a step. After you created the indexfile.sql and changed the tablespace names. You are supposed to run the indexfile.sql. That will pre-create the objects. You also have to remove at the comment block indicators: "REM", else it just tries to create indexes. You will also have to ad the "ignore=y" to your imp command, else it will try the create the objects and fail.
Unlimited tablespace shouldn't be an issue.

I am facing a new problem with xml schema, plz help me

Hi @,
I am facing a problem with xml schema validation. Below is my code.
public void initialize(String cfgFileName) {
try {
try {
DOMParserWrapper parser = (DOMParserWrapper)Class.forName("dom.wrappers.DOMParser").newInstance();
parser.setFeature( "http://apache.org/xml/features/dom/defer-node-expansion",true );
parser.setFeature( "http://xml.org/sax/features/validation",true);
parser.setFeature( "http://xml.org/sax/features/namespaces",true );
parser.setFeature( "http://apache.org/xml/features/validation/schema",true );
parser.setFeature( "http://apache.org/xml/features/validation/schema-full-checking",true );
Document document = parser.parse(cfgFileName);
System.out.println("Vijay .. code .. damar\n");
}catch (org.xml.sax.SAXParseException spe) {
} catch (org.xml.sax.SAXNotRecognizedException ex ){
} catch (org.xml.sax.SAXNotSupportedException ex ){
} catch (org.xml.sax.SAXException se) {
if (se.getException() != null)
se.getException().printStackTrace(System.err);
else
se.printStackTrace(System.err);
}catch (Exception e) {
System.out.println("Caught unknown exception : \n");
e.printStackTrace(System.err);
System.out.println("Vijay .. code .. success\n");
DocumentBuilderFactory docBuilderFactory = DocumentBuilderFactory.newInstance();
DocumentBuilder docBuilder = docBuilderFactory.newDocumentBuilder();
//docBuilder.setErrorHandler(myErrorHandler);
cfg = docBuilder.parse(new File(cfgFileName));
cfg .getDocumentElement ().normalize ();
} catch (Exception e) {
e.printStackTrace();
In the above code I am parsing the xml file and i am doing schema validation. Schema validation is proper and it is validating correctly. Only problem is that, It is validating and showing error correctly correctly but it is not catching that error.
For clear understanding I am printing one statement before parsing and after parsing.
SYSTEM.OUT.PRINTLN("Vijay .. code .. damar\n") this is before parsing
SYSTEM.OUT.PRINTLN("Vijay .. code .. success\n") this is after parsing
Here what is happening means, It is validating correctly and showing error :
[Error] nw_layout-new.xml:800:97: Datatype error: Value 'y' does not match regular expression facet 'yes|no'..
Vijay .. code .. damar
Vijay .. code .. success
Here it is showing error and still continueing not catching.
Plz give solution for this.
Thanks
vijay K

Hello dipthebe,
Check out the articles below go through troubleshooting steps for your iPhone when the screen is unresponsive. You may want to try and restore your iPhone as a new device and then test out what happens when you miss a call to see if the issue is still present afterwards.
iPhone, iPad, iPod touch: Troubleshooting touchscreen response
http://support.apple.com/kb/ts1827
Use iTunes to restore your iOS device to factory settings
http://support.apple.com/kb/HT1414
Regards,
-Norm G.

Change open sales order with new condition schema

Hi SD Experts,
I have to change condition type on condition schema. For example, now we have ZPVI (Discount %). I have to change with ZPFI (Discount %). But we have some open sales orders with old schema. Can I correct old sales orders with new condition schema? Is it possible?
Thank you.
Gulay Celik

>
Shai Sinai wrote:
> 3) The item categories of document items are assigned to billing plan types. This customization does create separate billing plan for each item, but the billing plans of item are refrenced to the header billing plan (according database field FPLA-RFPLN and screen field RV60F-KFREL), what means that item's values are not taken into consideration.
>
In this case it is obvious that it's not possible to have an item on the same document, which would have a billing plan different from the header. Unless, of course, you are ready to change the existing configuration or create a new item category, which would be independent from the header billing plan.
If, despite configuration, such entry is possible in VA41/VA42, then you'll have to use BDC instead of BAPI. Unfortunately, BAPIs do not have all the same functionality that might be available in the transaction.

How to install and reconfigure a new hard drive?

How to install and reconfigure a new hard drive?
I installed a new hard drive from best buy for my "vintage" MacBook laptop. When I turned on the laptop and the flashing folder appeared, I need help?
I looked online for some clues. I put in the software disk I received when I bought the disk but I cannot select a destination volume to install the software. I tired to partition the drive within disk utility but there was an input/output error. Should I just plug in my external hard drive and hope everything reboots like magic ?
Thank you for any help you can give

How to replace or upgrade a drive in a laptop
Step One: Repair the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Step Two: Remove the old drive and install the new drive. Place the old drive in an external USB enclosure. You can buy one at OWC who is also a good vendor for drives.
Step Three: Boot from the external drive. Restart the computer and after the chime press and hold down the OPTION key until the boot manager appears. Select the icon for the external drive then click on the downward pointing arrow button.
Step Four: New Hard Drive Preparation
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your new hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
Step Five: Clone the old drive to the new drive
1. Open Disk Utility from the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Check the box labeled Erase destination.
5. Select the destination volume from the left side list and drag it to the Destination entry field.
6. Select the source volume from the left side list and drag it to the Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the new internal drive. Source means the old external drive.
Step Six: Open the Startup Disk preferences and select the new internal volume. Click on the Restart button. You should boot from the new drive. Eject the external drive and disconnect it from the computer.

Creating a new schema in a Logical Standby Database

Hi All,
I am experimenting with logical standby databases for the purpose of reporting, and have not been able to create a new schema in the logical standby database - one of the key features of logical standbys.
I have setup primary and logical standby databases, and they seem to be running just fine - changes are moved from the primary to the standby and queries on the standby seem to run ok.
However, If I try to create a new schema on the logical standby, that does not exist on the primary, I get "ORA-01031: insufficient privileges" errors when I try to create new objects.
Show below are the steps I have taken to create the new schema on the logical standby. Any help would be greatly appreciated.
SYS@UATDR> connect / as sysdba
Connected.
SYS@UATDR>
SYS@UATDR> select name, log_mode, database_role, guard_status, force_logging, flashback_on, db_unique_name
2 from v$database
3 /
NAME LOG_MODE DATABASE_ROLE GUARD_S FOR FLASHBACK_ON DB_UNIQUE_NAME
UATDR ARCHIVELOG LOGICAL STANDBY ALL YES YES UATDR
SYS@UATDR>
SYS@UATDR> create tablespace ts_new
2 /
Tablespace created.
SYS@UATDR>
SYS@UATDR> create user new
2 identified by new
3 default tablespace ts_new
4 temporary tablespace temp
5 quota unlimited on ts_new
6 /
User created.
SYS@UATDR>
SYS@UATDR> grant connect, resource to new
2 /
Grant succeeded.
SYS@UATDR> grant unlimited tablespace, create table, create any table to new
2 /
Grant succeeded.
SYS@UATDR>
SYS@UATDR> -- show privs given to new
SYS@UATDR> select * from dba_sys_privs where grantee='NEW'
2 /
GRANTEE PRIVILEGE ADM
NEW CREATE ANY TABLE NO
NEW CREATE TABLE NO
NEW UNLIMITED TABLESPACE NO
SYS@UATDR>
SYS@UATDR> -- create objects in schema
SYS@UATDR> connect new/new
Connected.
NEW@UATDR>
NEW@UATDR> -- prove ability to create tables
NEW@UATDR> create table new
2 (col1 number not null)
3 tablespace ts_new
4 /
create table new
ERROR at line 1:
ORA-01031: insufficient privileges
NEW@UATDR>
NEW@UATDR>

HI Daniel,
I appreciate your quick response.
My choice of name may not have been ideal, however changing new to another name - like gav - does not solve the problem.
SYS@UATDR> connect / as sysdba
Connected.
SYS@UATDR>
SYS@UATDR> select name, log_mode, database_role, guard_status, force_logging, flashback_on, db_unique_name
2 from v$database
3 /
NAME LOG_MODE DATABASE_ROLE GUARD_S FOR FLASHBACK_ON DB_UNIQUE_NAME
UATDR ARCHIVELOG LOGICAL STANDBY ALL YES YES UATDR
SYS@UATDR>
SYS@UATDR> create tablespace ts_gav
2 /
Tablespace created.
SYS@UATDR>
SYS@UATDR> create user gav
2 identified by gav
3 default tablespace ts_gav
4 temporary tablespace temp
5 quota unlimited on ts_gav
6 /
User created.
SYS@UATDR>
SYS@UATDR> grant connect, resource to gav
2 /
Grant succeeded.
SYS@UATDR> grant unlimited tablespace, create table, create any table to gav
2 /
Grant succeeded.
SYS@UATDR>
SYS@UATDR> -- show privs given to gav
SYS@UATDR> select * from dba_sys_privs where grantee='GAV'
2 /
GRANTEE PRIVILEGE ADM
GAV CREATE TABLE NO
GAV CREATE ANY TABLE NO
GAV UNLIMITED TABLESPACE NO
SYS@UATDR>
SYS@UATDR> -- create objects in schema
SYS@UATDR> connect gav/gav
Connected.
GAV@UATDR>
GAV@UATDR> -- prove ability to create tables
GAV@UATDR> create table gav
2 (col1 number not null)
3 tablespace ts_gav
4 /
create table gav
ERROR at line 1:
ORA-01031: insufficient privileges
GAV@UATDR>

How to add a new schema in active directory by jndi?

I can add new objectclass schema and new attribute into eDirectory from JNDI. But I failed doing the same to active directory. I search all topic in this forums and seems like there is no such answer. So for active directory, the only way to add new schema is by using MS MMC + AD schema snap-in?

You can update the schema via LDAP. Any tool that uses LDAP, such as Active Directory Services Interface (ADSI), Java/JNDI, LDAP Data Interchange Format (LDIF) can be used. You are not restricted to the Active Directory Schema Management snap-in.
I strongly recomend that you read the following article http://windowssdk.msdn.microsoft.com/en-us/library/ms677995.aspx as schema extensions are not to be undertaken lightly.
Also, if you are extending the schema, DO NOT use other organization's schema OID's. Imagine how directories would become inoperable because you defined hat size as an integer value with an OID of 1.2.3 and someone else defined Social Security Number as a string with an OID of 1.2.3 ! You can obtain your own OID branch from either Microsoft (http://msdn.microsoft.com/certification/ad-registration.asp) or from a standards organization such as ANSI.
I'm kind of hoping that seeing as though you have mentioned that you have extended the schema for e-Directory, that you understand LDAP schemas and that you have your own valid OID. Do not use my shoe size OID !
The following snippet illustrates how to extend the schema using JNDI.....
String attrName = "cn=ms-ShoeSize,cn=Schema,cn=Configuration,dc=antipodes,dc=com";
LdapContext ctx = new InitialLdapContext(env,null);
Attributes attr = new BasicAttributes(true);
attr.put("cn","ms-ShoeSize");
attr.put("objectClass","attributeSchema");
attr.put("ldapDisplayName","msShoeSize");
attr.put("isSingleValued","TRUE");
attr.put("attributeID","1.2.840.113556.1.4.7000.141");
attr.put("attributeSyntax","2.5.5.9");
Context newattr = ctx.createSubcontext(attrName,attr);Having created a new attribute, you could then either add it to an existing class, or create another abstract class, add it to the new abstract class, and add the the new abstract class as an auxilliary class to an existing structural class. For example create a new auxilliary class called "clothes Sizes", add the attribute "Shoe Size" as a mayContain attribute, and then add "Clothes Sizes" as an auxilliary class to inetOrgPerson.
Note that you need to wait for the schema cache to refresh, before adding attribute or class definitions to one another, and before instantianting new objects with the new classes & attribute definitions. You can either wait for teh schema cache to refresh itself, or you can force a refresh by writing the value of 1, to the attribute "schemaUpdateNow" on the RootDSE.
As I mentioned at the start of this response, I personally prefer to use LDIF, simply because it enables end-users/customers to review the schema extensions and understand their potential impact before applying them. A sample that accomplishes the above would look something like:dn: CN=ms-ShoeSize,CN=Schema,CN=Configuration,DC=Antipodes,dc=com
changetype: add
objectClass: attributeSchema
cn: ms-ShoeSize
ldapDisplayName: msShoeSize
attributeID: 1.2.840.113556.1.4.7000.141
attributeSyntax: 2.5.5.9
isSingleValued: TRUE
dn:
changetype: modify
replace: schemaupdatenow
schemaupdatenow: 1
dn: CN=inetOrgPerson,CN=Schema,CN=Configuration,DC=Antipodes,dc=com
changetype: modify
add: mayContain
mayContain: mSShoeSize
dn:
changetype: modify
replace: schemaupdatenow
schemaupdatenow: 1
-

Creating a new schema or adding some more tables in existing schema ??

Hi All,
We have a new requirement from the client asking us to include a few new functionalities(pages--- all together a new application has to be embedded into our application) in our application. By adding these new functionalities, the number of hits to our application can be doubled.
As per the above requirement, I would like to know that whether to create a new schema or to create some new tables in the existing database for the new functionalities.
By what way, can I handle the number of requests in a better way? by creating the new schema or by creating the new tables for the new functionalities.
Also I would like like to know what kind of factors will differ between creating a new schema or creating new tables for the new functionalities in the existing schema.
FYI... We are using Cold Fusion as front-end and Oracle 9i for back-end

This the forum for Oracle's SQL Developer tool. You will get better answers in the Database - General forum.
The short answer is that from a performance point of view there will be no difference. The issues are more to do with maintenance.

Catch all error information while validating xml content with xsd schema

Hi experts,
I created a java mapping to validating the input xml content with xsd schema (schema validation). What I want is to catch all error message to the xml not just the first error. I used SAXParser in sapxmltoolkit.jar to do the schema validation. The below is a part of my java mapping.
XMLReader parser = XMLReaderFactory.createXMLReader("com.sap.engine.lib.xml.parser.SAXParser");
parser.setFeature( "http://xml.org/sax/features/validation" , true);
parser.setFeature( "http://apache.org/xml/features/validation/schema" , true);
parser.setProperty("http://java.sun.com/xml/jaxp/properties/schemaLanguage", "http://www.w3.org/2001/XMLSchema");          parser.setProperty("http://java.sun.com/xml/jaxp/properties/schemaSource",this.getClass().getClassLoader().getResourceAsStream(schema)); // schema is my schema name
parser.setErrorHandler(new ParseErrorHandler()); // ParseErrorHandler is my own ErrorHandler which extends DefaultHandler
parser.parse(new InputSource(new ByteArrayInputStream(sinput.getBytes())));
// In error handler, I comment all code so as not to throw any exception
public class ParseErrorHandler extends DefaultHandler
     public void error(SAXParseException e) throws SAXException
          // sSystem.out.println("Error" + e.getMessage());
          // throw e;
     public void fatalError(SAXParseException e)
          // throw e;
          // System.out.println("SAP Fatal Error" + e.getMessage());
Unfortunately the program always stopped while catching the first error. Check the below log.
com.sap.engine.lib.xml.parser.NestedSAXParserException: Fatal Error: com.sap.engine.lib.xml.parser.ParserException:
ERRORS :
cvc-simple-type : information item '/:ShipNotice[1]/:Header[1]/:To[1]/:PartnerInformation[1]/:AddressInformation[1]/:CityName[1]' is not valid, because it's value does not satisfy the constraints of facet 'minLength' with value '1'.
cvc-data : information item '/:ShipNotice[1]/:Header[1]/:To[1]/:PartnerInformation[1]/:AddressInformation[1]/:CityName[1]' is is not valid with respoct to the corresponding simple type definition.
cvc-element : element information item '/:ShipNotice[1]/:Header[1]/:To[1]/:PartnerInformation[1]/:AddressInformation[1]/:CityName[1]' is associated with invalid data.
cvc-element : element information item '/:ShipNotice[1]/:Header[1]/:To[1]/:PartnerInformation[1]/:AddressInformation[1]' is not valid with respect to it's complex type definition..
cvc-element : element information item '/:ShipNotice[1]/:Header[1]/:To[1]/:PartnerInformation[1]' is not valid with respect to it's complex type definition..
cvc-element : element information item '/:ShipNotice[1]/:Header[1]/:To[1]' is not valid with respect to it's complex type definition..
cvc-element : element information item '/:ShipNotice[1]/:Header[1]' is not valid with respect to it's complex type definition..
cvc-element : element information item '/:ShipNotice[1]' is not valid with respect to it's complex type definition..
-> com.sap.engine.lib.xml.parser.ParserException:
I tried using Xerces and JAXP to do validation, the same error happened. I have no idea on this. Does xi has its own error handler logic? Is there any body can make me get out of this?
Thanks.

<h6>Hi experts,
<h6>
<h6>I created a java mapping to validating the input xml content with xsd schema (schema validation). What I want is to catch all <h6>error message to the xml not just the first error. I used SAXParser in sapxmltoolkit.jar to do the schema validation. The below <h6>is a part of my java mapping.
<h6>XMLReader parser = XMLReaderFactory.createXMLReader("com.sap.engine.lib.xml.parser.SAXParser");
<h6>parser.setFeature( "http://xml.org/sax/features/validation" , true);
<h6>parser.setFeature( "http://apache.org/xml/features/validation/schema" , true);
<h6>parser.setProperty("http://java.sun.com/xml/jaxp/properties/schemaLanguage", "http://www.w3.org/2001/XMLSchema");          <h6>parser.setProperty("http://java.sun.com/xml/jaxp/properties/schemaSource",this.getClass().getClassLoader().getResourceAsStream(schema)); <h6>// schema is my schema name
<h6>parser.setErrorHandler(new ParseErrorHandler()); // ParseErrorHandler is my own ErrorHandler which extends Default Handler
<h6>parser.parse(new InputSource(new ByteArrayInputStream(sinput.getBytes())));
<h6>
<h6>// In error handler, I comment all code so as not to throw any exception
<h6>public class ParseErrorHandler extends DefaultHandler
<h6>{
<h6>     public void error(SAXParseException e) throws SAXException
<h6>     {
<h6>          // sSystem.out.println("Error" + e.getMessage());
<h6>          // throw e;
<h6>     }
<h6>
<h6>     public void fatalError(SAXParseException e)
<h6>     {
<h6>          // throw e;
<h6>          // System.out.println("SAP Fatal Error" + e.getMessage());
<h6>
<h6>     }
<h6>
<h6>}
<h6>
<h6>Unfortunately the program always stopped while catching the first error. Check the below log.
<h6>
<h6>com.sap.engine.lib.xml.parser.NestedSAXParserException: Fatal Error: com.sap.engine.lib.xml.parser.ParserException:
<h6>ERRORS :
<h6>cvc-simple-type : information item <h6>'/:ShipNotice[1]/:Header[1]/:To[1]/:PartnerInformation[1]/:AddressInformation[1]/:CityName[1]' <h6>is not valid, because it's value does not satisfy the constraints of facet 'minLength' with value '1'.
<h6>cvc-data : information item <h6>'/:ShipNotice[1]/:Header[1]/:To[1]/:PartnerInformation[1]/:AddressInformation[1]/:CityName[1]' <h6>is is not valid with respoct to the corresponding simple type definition.
<h6>cvc-element : element information item <h6>'/:ShipNotice[1]/:Header[1]/:To[1]/:PartnerInformation[1]/:AddressInformation[1]/:CityName[1]' <h6>is associated with invalid data.
<h6>cvc-element : element information item <h6>'/:ShipNotice[1]/:Header[1]/:To[1]/:PartnerInformation[1]/:AddressInformation[1]' <h6>is not valid with respect to it's complex type definition..
<h6>cvc-element : element information item <h6>'/:ShipNotice[1]/:Header[1]/:To[1]/:PartnerInformation[1]' <h6>is not valid with respect to it's complex type definition..
<h6>cvc-element : element information item <h6>'/:ShipNotice[1]/:Header[1]/:To[1]' <h6>is not valid with respect to it's complex type definition..
<h6>cvc-element : element information item <h6>'/:ShipNotice[1]/:Header[1]' <h6>is not valid with respect to it's complex type definition..
<h6>cvc-element : element information item '/:ShipNotice[1]' is not valid with <h6>respect to it's complex type definition..
<h6> -> com.sap.engine.lib.xml.parser.ParserException:
<h6>
<h6>
<h6>I tried using Xerces and JAXP to do validation, the same error happened. I have no idea on this. Does xi has its own error <h6>handler logic? Is there any body can make me get out of this?
<h6>Thanks.

Creation of new schema based on old schema

Hi,
I want to create a new schema with the different name based on the objects of the old schema.
For that I created a new user and schema and then imported the dump file into it. But problem is
I am not getting the external table structure, except that other objects are coming into new schema.
Ex: Old schema name "ABC", new schema name "XYZ"
ABC contains 15 normal tables, 3 external table, 2 procedure, 2 functions and 2 packages.
I want to have all these objects in this new schema.
Help me regarding this matter.
Thanks in advance,
Narayan

Hi,
Thanks Seenu,
So i have to clasify based on Maintenance activity types. If there are activities like repair, shutdown, testing etc. then i will have to create work center based on that?
So i can create some activities like, Modification, Repair, standby, waiting etc and assign work center for each?
Here we are following 4 maintenance planning preventive, predictive, breakdown & shutdown so is it possible to make 4 work center according to those.
please correct me if i m wrong. i really have no much idea in this. any help or suggestions will be appreciated.
Thanks in advance
Ramya

OIM Reconfiguration with new Schema

Similar Messages

Maybe you are looking for