OIM Support for Exchange Online

Hi,
We are finding out the feasible options for the integration of OIM with Exchange Online.
Any pointers on this.
Regards
Vicky

Hi Kevin,
Thanks for your response.
We are looking at Email Service ( Microsfot Exchange on cloud ). I have seen the architecture of Exchange Cloud in terms of provisioning at microsoft site.
It says that , Microsoft will pull the data from the customer AD, for the accounts using DirSynch. So, will it be sufficient if we provision users only into customer AD Forest.
My understanding from that doc says, they will pull the data from the customer Forest to Microsoft Managed AD forest, which will then link accounts to Exchange on Microsoft managed servers.
Correct me if I am wrong.
Regards
Vicky

Similar Messages

  • Is smb 3.0 already supported for exchange 2013

    Hello,
    We are looking to deploy exchange 2013. We have a netapp storage and vmware environment.
    I was wondering if smb 3.0 is already supported for exchange 2013. I read in a blog of 2012 that it wasn't supported at the time. We would like to use it instead of a iscsi lun.

    Hi,
    Based on my knowledge, it is still not supported for Exchange 2013 up to now.
    Here is an article for your reference, please refer to the "Exchange storage requirements" section.
    Exchange 2013 Virtualization
    http://technet.microsoft.com/en-us/library/jj619301.aspx#BKMK_Prereq
    Another related article for your reference.
    Exchange 2013 Storage Configuration Options
    http://technet.microsoft.com/en-us/library/ee832792(v=exchg.150).aspx
    Best regards,
    Belinda
    Belinda Ma
    TechNet Community Support

  • GroupWise 7.0 API Gateway is supported for Exchange 2007?

    Can someone confirm that GroupWise 7.0 API Gateway is supported for Exchange 2007?
    I found a note in a guide that stated it was not YET supported as of 1/27/2008.

    bwalker2,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://support.novell.com and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.novell.com)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://support.novell.com/forums/faq_general.html
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://support.novell.com/forums/

  • SOFS support for Exchange Server 2013

    Hi all,
    I am aware of the following factors:
    1. Exchange only supports block-level storage
    2. Using SoFS as DAG FSW is not supported.
    But may I confirm whether Microsoft supports the scenario below?
    ==============================================
    My client has one set of Windows 2012 R2 Scale-Out File Servers to support their hyper-V farm. Storage is Dell MD3000 with Windows 2012 R2 Storage Space. Is it supported by Microsoft to run Exchange Server 2013 and Exchange Server 2010 in the virtual machines
    which are running on SoFS? Assume IOPS has been properly sized.
    ==============================================
    Regards,
    William
    William Yang

    Hi,
    There is no official documents talked about whether the Windows server 2012
    Scale-Out File Server is supported for Exchange 2013 and Exchange 2010.
    Generally, the supported storage configuration in Exchange 2013 is listed in the article below:
    https://technet.microsoft.com/en-us/library/ee832792(v=exchg.150).aspx
    Hope it helps.
    Regards,
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
    Winnie Liang
    TechNet Community Support

  • MAPI/HTTP for exchange online?

    Hi Guys
    When Will Microsoft enable mapi/http for exchange online ?
    Hope this happens soon :)

    You might actually see this consuming more bandwidth.....
    And yes, the connect/reconnect/cold start is waaaay faster than RPC/HTTPS
    When it is enabled in o365, you will probably see it announced on the o365 Tech Blog.
    Cheers,
    Rhoderick
    Microsoft Senior Exchange PFE
    Blog:
    http://blogs.technet.com/rmilne 
    Twitter:   LinkedIn:
      Facebook:
      XING:
    Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

  • Does anyone know if iOS 7 has support for Exchange 2003?

    Does anyone know if iOS 7 has support for Exchange 2003?

    All previous versions of iOS have had support for Exchange 2003.  Of course, more functionality is available with Exchange 2007/2010 support than 2003, but that's due to limitations in what the protocols support.

  • Can't figure out how to use Amazon SES as a smart host for Exchange Online

    Hi,
    I have a problem that is proving very difficult to solve, and I'm hoping someone on here might know a bit more about this.
    I am trying to configure MS Exchange Online to route all emails through Amazon SES as a relay server, however the problem is that SES seems to want you to pass it SMTP username and password credentials to authenticate with, and I don't think Exchange Online
    allows for this?
    I have checked all the options in Outbound Connector section and there doesn't seem to be any place where I can choose SMTP authentication.  On Exchange 2013 and on-premise 365 Exchange solution I believe you can do this, but with pure Exchange Online
    I'm not sure...
    Does anyone know whether this is possible, and if not why Microsoft doesn't allow it / if they might be intending to enable this in the near future?
    Thanks a lot in advance!
    Tom

    Hi,
    Since your questions are Exchange Online related, I suggest we also ask it on the Microsoft Exchange Online forum:
    https://social.technet.microsoft.com/Forums/msonline/en-US/home?forum=onlineservicesexchange
    Hope you can get your answer soon.
    Thanks,
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Simon Wu
    TechNet Community Support

  • Is Windows Azure officially supported for Exchange 2013?

    Though Exchange 2013 can be installed on Windows Azure, however can somebody help me in knowing that if its officially supported with it OR can live environment of Exchange be setup on Windows Azure?

    Hinte is correct.
    You can set up a Exchange 2013 lab in Azure. You may have seen that Henrik Walther has done just that:
    http://www.msexchange.org/articles-tutorials/office-365/exchange-online/deploying-exchange-2013-hybrid-lab-environment-windows-azure-part1.html
    But this is just for practice / training.
    Besides lack of support, cost of sufficient resources to run E2K13 correctly would be greater than simply using O365 / Exchange Online.
    Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

  • Outlook configuration for Exchange online kiosk plan

    Hi,
    I'm trying to configure outlook for kiosk user and only the mails in inbox is getting download. Mails in other folders are not getting download.
    Please help...

    Hi,
    We have to use POP3 to setup Outlook when you want configure Exchange Online Kiosk in Outlook 2007/2010, and Outlook 2013.
    Since this issue is related to Exchange Online, we recommend contact Office 365 team so that you can get more professional suggestion. For your reference:
    http://community.office365.com/en-us/default.aspx
    Thanks
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
    Allen Wang
    TechNet Community Support

  • Office 365 version for Exchange online archive

    hi,
    i have a SBS 2011 and i use the exchange 2010 on it. At the moment I use Outlook 2007 to connect to my Exchange mailbox. A few days ago, I signed up for the Office 365 trial version and i am going to switch to Office 365 in a few days. I also have an Exchange
    Enterprise CAL to use the online archive functionality.
    my question is, what version of Office 365 (for business) do i need to be able to use the online archive in my outlook desktop version?
    best regards
    thomas

    Outlook in Office 365 ProPlus，
    Outlook in Office 365 Enterprise E3， Outlook in Office 365 Midsize Business
    https://support.office.microsoft.com/en-us/article/Outlook-license-requirements-for-Exchange-features-46b6b7c5-c3ca-43e5-8424-1e2807917c99?CorrelationId=25f2a475-9f26-4920-b8b3-11e2f9fa9592&ui=en-US&rs=en-001&ad=US

  • Prepare schema for Exchange Online

    Hi,
    My company is going to use Microsoft Exchange Online and I first need to prepare schema for this (that's what I was told).
    I have downloaded Microsoft Exchange 2013 and tried to run "setup.exe /PrepareSchema" but it says it needs WMF 3.0 to run the setup. But I have problems with installing it on my windows 2008 R2 SP1 server. Is it ok to try to install WMF 4.0 instead
    of WMF 3.0?

    Hi,
    From your description, I would like to clarify the following things:
    1. Exchange Online is different from Exchange 2013.
    2. If you want to install WMF 4.0, the Exchange version should be Exchange 2013 SP1, Exchange 2013 is not supported.
    Here is a thread for your reference. Please see the System Requirements.
    Windows Management Framework 4.0
    http://www.microsoft.com/en-us/download/details.aspx?id=40855
    Hope it helps.
    Best regards,
    Amy Wang
    TechNet Community Support

  • Configure send connector for exchange online protection

    Hello Forum members,
    I am trying to configure send and receive connectors for Exchange 2010 to route
    on-premises mailboxes to Exchange OnLine Protection.  The "help" info MS provides
    is for Ex 2013 - and the EAC GUI and config does not lend a close fit to using the 2010
    Exch Management Console.  How can I configure connectors to properly connect to the Exchange Online Protection?
    I have seen where the ip addresses are posted, etc.  I am unclear how to configure the properties on the SBS 2011/EX 2010 server.
    Any tips will help,
    Thanks,
    Eric H.
    Network and Server Installs

    Hello Wesleyhe,
    You cannot use AD anything with EOP - if you mean exchange on-line protection.
    you have to set a smart host on the SBS server to connect to EOP, you may need to add the EOP server ips to your network config
    on the SBS server.  the smart host line (for the send connector on SBS server) is something like: yourdomainname-com.mail.protection.outlook.com.
    Then you need to configure the outside ip for your SBS server access in the EOP admin area.
    Hope this helps.
    eholz
    Network and Server Installs

  • Incremental Sync For Exchange Online Staged Migration

    While doing an Exchange Online staged migration, the on-premises mailboxes get synchronized to the cloud, along with the targetAddress attribute being rewriten in the on-premises environment in order for all new mails to be delivered to the cloud. I'd like
    more control over the whole process and would like to better control when the "switch" is being done - namely when the user starts using his cloud mailbox instead of the on-premises one.
    By using New-MigrationBatch, the migration of the mailboxes can be done so that the targetAddress attribute doesn't get rewritten, allowing for the user to keep receiving new mails on his old mailbox. However there is no incremental sync that happens periodically
    (as in the
    case for cutover and IMAP Exchange migrations) to allow the cloud mailbox to be kept in sync. Is there a workaround to enable this feature for batches belonging to staged migrations as well ?

    Hi,
    I recommend you refer to the following articles:
    High Availability and Business Continuity
    Exchange Online mailboxes are continuously replicated to multiple database copies, in geographically dispersed Microsoft data centers, to provide data restoration capability in the event of a local messaging infrastructure failure. For large-scale failures,
    service continuity management procedures are initiated.
    Thanks.
    Niko Cheng
    TechNet Community Support

  • Creating a new address list for Exchange Online (Office 365) by two parameters

    Good day!
    I need to create two new address list in Exchange Online 2013 (Office 365) that users will choose the two parameters.
    Address sheet1: No staff
    Address Sheet2: Staff
    Parameters address sheet not staff:
    Parameter 1: Company
    It must match the value - MyCompany
    Parameter 2: job title
    it must be different from the value - Staff
    Parameters address sheet Staff:
    Parameter 1: Company
    It must match the value - MyCompany
    Parameter 2: job title
    It must match the value - Staff
    Problems:
    1) Is it possible to filter user mailboxes on the parameter of discrepancy?
    2) Can not find the parameter values ​​for the script field job title
    https://technet.microsoft.com/ru-ru/library/aa996912%28v=exchg.150%29.aspx
    https://technet.microsoft.com/en-us/library/bb738157%28v=exchg.150%29.aspx
    While on the side of 365 in the user properties such parameter is:
    http://joxi.ru/MAj0Jj7hGyDbme
    Company option too.

    I got to build a team that I need (describes the necessary conditions)
    and successfully held in PS 4.0 after connecting to the office 365:
    1) Set-ExecutionPolicy unrestricted
    2) $ UserCredential = Get-Credential
    (Data Entry Administrator 365)
    3) $ Session = New-PSSession -ConfigurationName
    Microsoft.Exchange -ConnectionUri https://outlook.office365.com/powershell-liveid/ -Credential $ UserCredential -Authentication Basic -AllowRedirection
    Import-PSSession $ Session
    4)
    PS C:\Windows\system32> New-AddressList -Name 'TEST1234' -RecipientFilter {((RecipientType -eq 'UserMailbox') -and ((Com
    pany -eq 'Company1') -and (Title -ne 'Student')))}
    Name                      DisplayName               RecipientFilter
    TEST1234                  TEST1234                  ((RecipientType -eq 'UserMailbox')
    -and (((Company -eq 'Company1...
    As a result, the new address list TEST1234 immediately appears. (When creating a new letter in the menu "To"), but on the inside
    it is empty (although there is 1 user which is fully consistent with those described in the filter conditions.).
    = (
    Tried a simple version:
    Office365
    не отображается в адресном списке.">The same thing - the only user with such parameters in AD -> Office365 is not displayed in the address list.
    (After running for a list TEST123 more than two days)
    Tell me what could be the problem?

  • Contact iTunes support for conquer online plz

    Plz I'm playing conquer online this game he want contact iTunes support for buy cps can u doit for me
    If u do I will thx very much if u doit to me

    Click here and request assistance.
    (83976)

Maybe you are looking for