OIM upgrade

Hello,
I've one OIM environment version 9.1.0.1862.4 and I have to replicate this environment. After a fresh OIM installation the version is 9.1.0.1860.16. I got p8273427_9101_Generic-BP02. Is this the right patch to upgrade from build 1860.16 to build 1862.4?
Thank you for your help

Yes Build No have meanings.
If it ran successfully then it will update the build no. If it didn't update the build no then its means it didn't run successfully.
BDW, on what basis you are saying that it ran successfully ?
If you see console then it will show you message BUILD SUCESSFULL always. :)
Just see the logs related to patch corresponding to your server. It will show you proper status of your patch.

Similar Messages

LDAP synch not supported during OIM upgrade from 9.x to 11g

Hi Experts,
Following line is mentioned in OIM upgrade guide for 9.x to 11g (http://docs.oracle.com/cd/E21764_01/upgrade.1111/e10129/upgrade_oim.htm)
“LDAP Sync is not supported when you upgrade from Oracle Identity Management 9.1 to Oracle Identity Management 11g”
Please help me in understanding the above line.
I have a pretty simple setup of OIM (version 9.1.0.2) with AD and Exchange connected. I guess I don't have any impact of above line.
LDAP synch is required when we integrate oracle identity manager with oracle access manager.
Please suggest.
Thanks
M S

Yes LDAP Sync has most of the features when you have OIM and OAM integrated with each other. You can go ahead with upgrade if LDAP Sync is not part of your requirement.

OIM upgrade question

What is the purpose of using upgrade assistant to upgrade OIM Middle tier?
What this upgrade OIM Middle tier task will do?
Pls assist.

upgrade middle tier performs following tasks:
- Upgrades OIM 9i components ti 11g
- Loads all jars (except event handlers) into database OIMHOME_JARS table
- Performs adapter up gradations
- All formmetadata.xml components are converted to equivalent 11g configurations
- Implements MDS configurations of 9i into 11g MDS database
- Performs SOA configurations
Overall upgrade is two stage process:
- Database schema upgrade
- Middle tier upgrade (components of OIM upgraded)
Refer below:
http://docs.oracle.com/cd/E21764_01/upgrade.1111/e10129/upgrade_oim.htm
regards,
GP

Issue in OIM Upgradation

Hi,
I have upgraded OIM9101 to OIM9102; on the OIM client it shows me the exact version i.e OIM9.1.0.2 but on OIM admin console it shows me the older version.
Could you advice on this??
I have deployed my OIM on websphere6.1.0.21.
Regards
Alabhya Goel

I have upgraded OIM9101 to OIM9102; on the OIM client it shows me the exact version i.e OIM9.1.0.2 but on OIM admin console it shows me the older version.
Where are you seeing this version?
9.1.0.1865.28 is a build version.
In XSD table there wil be one column named PATCH_Base. It shld show 9.1.0.2.
What's value for this column for you ?

OIM upgrade from 9101 to 9102

Hi All
I am planning to upgrade OIM 9101 to 9102.
Please suggest me what docs should I follow and what BP of 9102 should I apply to achieve a stable configuration.
Thanks

hi
you have to apply a patch with release number 9.1.0.1865.28 to upgrade from 9101 to 9102.
you can get the patch from oracle metalink . Use the readme guidelines to upgrade the instance.
It is highly recommended to take the backup of the OIM database , Xellerate home and Application server as kevin mnetioned above.
Regards
Shashidhar

OIM Upgrade from 9.1.0.1 to 9.1.0.2 - issue

I performed upgrade from 9.1.0.1 to 9.1.0.2. All diagnostic dashboard tests are passed with exception of two tests.
The following checks failed (diagnostic dashboard):
1. Oracle Identity Manager Libraries and Extensions Version report
java.lang.NullPointerException
at com.thortech.xl.systemverification.tests.ReportAppLibrariesExtensionsVersion.addLibraries
2. Oracle Identity Manager Libraries and Extensions Manifest Report
java.lang.NullPointerException
at com.thortech.xl.systemverification.tests.ReportAppLibrariesExtensionsManifest.addLibraries
Questions:
1. Documentation states that you have to copy files from PATCH/xelerate/lib to OIM_HOME/xelerate/lib. Does this mean that I have to remove the files from OIM_HOME/xellerate/lib and then to copy them from PATCH/xellerate/lib or just copy (overwrite)? Or the effect is the same either way?
It looks like there is a problem with libraries
2. I noticed that product version is 9.1.0.1860.16
Build 1860.16
I would expect it to be 9.1.0.2. Please confirm.
3. Oracle Identity Manager with OC4J - Best Practices article on metalink suggests the following patches for OAS:
If 10.1.3.3 is used
Patch number 6685235
Patch number 5389650
Patch number 6454278
Patch number 6880142
Patch number 6808170
I have not applied 5 additional patches for OAS. Could these errors be related to missing patches?
Your feedback is very important. Thank you for your time
Edited by: user13295875 on Jun 29, 2010 8:41 AM

Did you still get the same product version after resolving your issue?

OIM R2 pre-requisite tasks

Dear All,
I am following Oracle documentation on R2 upgrade: http://docs.oracle.com/cd/E27559_01/doc.1112/e28183/oim_up.htm#BABGBFHB
1. How to verify that oracle.soa.worklist.webapp is targeted to Oracle Identity Manager server in 11.1.1.5.0?
2. How to target oracle.soa.worklist.webapp to Oracle Identity Manager Managed Server if it is not?
3. How to verify that oracle.idm.uishell is in No Stage mode?
4. How to "address" all pending requests before you begin upgrading? What needs to be done?
I would appreciate your feedback.
Kind Regards
Maria Adair

Hi Maria,
I'm in the same step in my OIM upgrading.
Have you been able to find out these checks?
Thank you

OIM - .xldatabasekey question

Is it possible to use a .xldatabasekey DURING Installation from another OIM environment?
OR, how exactly OIM creates the .xldatabasekey during installation?
Is there a way to intervene the process during the installation?

Hi Rajiv,
Yes, I am aware of that process (copying key to another instance). However I am specifically interested to know about .xldatabasekey during the OIM installation itself - When we create a "fresh" OIM database - is it possible to use our own key?
If we can use the same database key during the OIM install, I feel that it will be easy during a OIM Upgrade process (such as we can copy the usr_password directly using SQL).
Regards
Vijay Chinnasamy
Edited by: Vijay_Chinnasamy on Jun 15, 2011 4:01 PM

Problem in Oracle Identity Manager 9.1.0 Web Console

Hi,
I did OIM Upgradation from OIM 9.0.3.1 to 9.1.0.
The Upgradation is completed.
In upgraded version(OIM910)of Web Console,i have some new options in Resource Management and Deployment Management.
When i click those options,it shows "Page cannot Found" error.
Can u please tell me,where this pages will exists or do i need some other customizations to get these things.
Please help me to resolve it.
Thanks,
Saranya.

Well what is the error which you get while doing Trusted Recon. If its some connection error then confirm that you have required connection jar files placed in the ThirdParty folder of OIM.
I am not very sure but I thing these would be the jar files required:
Oracle 8i - classes12.jar
Oracle 10g - ojdbc.jar
so make sure you have right jar files.
Thanks
Sunny

Exchange Adapter Create Mailbox polling interval?

As part of the Exchange Adapter functionality it checks AD to see if the Exchange attributes are set on the AD user. Depending on your AD configuration it can take some time for those attributes to get populated on all DCs. The behavior of the adapter is to repeatly check for those attributes being set until it hits some timeout threshold. That threshold is configured via the RMTimeOut code of Parameters.Exchange. I can increase RMTimeOut to a huge number so that eventually it will see the Ad attributes. But I would really prefer to set a number of times to check and\or an interval to check. In it's current implementation it keeps thrashing against AD repeatedly checking, without a break, until it hits that TimeOut threshold and that seem LTD. Any insight is appreciated.

No fix - I just increased the time to something huge. But the latest Exchange adapter 9.1.1 says its changed how RMTimeOut is handled and maybe that will resolve the issue.
Unfortunately you have to be on the latest rev of OIM to use the the latest Exchange connector, I'm not & an OIM upgrade is not an option at this time.

RoleManagerService.getRoleMembers doesn't work in OIM11gR2

Hi,
I use a custom class developed to 11gR1 version to send mail notification, this class use the standard API "roleManagerService.getRoleMembers(roleID, true);" but now, after OIM upgrading to version 11gR2 this API don't work, and always return this exception:
getUserMemberships: oracle.iam.identity.ex
ception.RoleMemberException: oracle.iam.identity.exception.RoleMemberException: java.lang.RuntimeException: java.sql.SQLSyntaxErrorException: ORA-01747: invalid user.table.column, table.column, or
column specification
So To get member we try to implement a workaround using "tcDataProvider.class" to extract user memberbership directly from OIM DB, but also in this case I catch an exception: "classDefNotFoundException"
which is the problem? are these classes deprecated?
How can we get the user list by role?exist a new API that provide this function?

I am afraid something wrong might have happened during upgrade..
Errors are database specific...
So, probably some sql scripts etc are not executed properly....

OIM 9.1.0.2 wont start after upgrade

I have upgraded OIM 9.1.0.1 to 9.1.0.2 following the document from the patch.
On running xlStartWLS.cmd to start the WebLogic domain - The command window just closes off in a second. Below is the output from xlStartWLS.cmd command
I couldn't figure-out what could be the problem. The setup is on Windows Stand-Alone machine.
===================================================================================
C:\bea\user_projects\domains\OIM\bin>setlocal
C:\bea\user_projects\domains\OIM\bin>SET XLHOME=C:\OIM\xellerate
C:\bea\user_projects\domains\OIM\bin>SET EXT_POST_CLASSPATH=C:\OIM\xellerate\ext\jdbcpool-0.99.jar;C:\OIM\xellerate\lib\xlLogger.jar;C:\OIM\xellerate\ext\log4j-1.2.8.jar;C:\OIM\xellerate\lib\xlUtils.jar;C:\OIM\xellerate\lib\xlCrypto.jar;
C:\bea\user_projects\domains\OIM\bin>call C:/bea/user_projects/domains/OIM\bin\setDomainEnv.cmd
"Sun JAVA"
JAVA Memory arguments: -Xms1280m -Xmx1280m -XX:PermSize=128m -XX:MaxPermSize=256m
WLS Start Mode=Development
CLASSPATH=;C:\bea\patch_wlw1030\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\bea\patch_wls1030\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\bea\patch_cie660\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\bea\JDK160~1\lib\tools.jar;C:\bea\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\bea\WLSERV~1.3\server\lib\weblogic.jar;C:\bea\modules\features\weblogic.server.modules_10.3.0.0.jar;C:\bea\WLSERV~1.3\server\lib\webservices.jar;C:\bea\modules\ORGAPA~1.5/lib/ant-all.jar;C:\bea\modules\NETSFA~1.0_1/lib/ant-contrib.jar;;C:\bea\WLSERV~1.3\common\eval\pointbase\lib\pbclient57.jar;C:\bea\WLSERV~1.3\server\lib\xqrl.jar;C:\OIM\xellerate\ext\jdbcpool-0.99.jar;C:\OIM\xellerate\lib\xlLogger.jar;C:\OIM\xellerate\ext\log4j-1.2.8.jar;C:\OIM\xellerate\lib\xlUtils.jar;C:\OIM\xellerate\lib\xlCrypto.jar;;;
PATH=C:\bea\patch_wlw1030\profiles\default\native;C:\bea\patch_wls1030\profiles\default\native;C:\bea\patch_cie660\profiles\default\native;C:\bea\WLSERV~1.3\server\native\win\32;C:\bea\WLSERV~1.3\server\bin;C:\bea\modules\ORGAPA~1.5\bin;C:\bea\JDK160~1\jre\bin;C:\bea\JDK160~1\bin;C:\bea\patch_wlw1030\profiles\default\native;C:\bea\patch_wls1030\profiles\default\native;C:\bea\patch_cie660\profiles\default\native;C:\bea\WLSERV~1.3\server\native\win\32;C:\bea\WLSERV~1.3\server\bin;C:\bea\modules\ORGAPA~1.5\bin;C:\bea\JDK160~1\jre\bin;C:\bea\JDK160~1\bin;C:\oracle\OHTTP13\bin;C:\oracle\OHTTP13\jlib;C:\OraHome\bin;C:\OraHome\jdk\jre\bin\client;C:\OraHome\jlib;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\bea\WLSERV~1.3\server\native\win\32\oci920_8;C:\bea\WLSERV~1.3\server\native\win\32\oci920_8
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\hostname:port\console *
starting weblogic with Java version:
Starting WLS with line:
C:\bea\JDK160~1\bin\java -client -Xms1280m -Xmx1280m -XX:PermSize=128m -XX:MaxPermSize=256m -DXL.HomeDir=C:\OIM\xellerate -Djava.security.auth.login.config=C:\OIM\xellerate\config\authwl.conf -Dlog4j.configuration=file:/C:\OIM\xellerate/config/log.properties -Djava.awt.headless=true;\OIM\xellerate\ext\ojdbc14.jar -Xverify:none -da -Dplatform.home=C:\bea\WLSERV~1.3 -Dwls.home=C:\bea\WLSERV~1.3\server -Dweblogic.home=C:\bea\WLSERV~1.3\server -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=C:\bea\patch_wlw1030\profiles\default\sysext_manifest_classpath;C:\bea\patch_wls1030\profiles\default\sysext_manifest_classpath;C:\bea\patch_cie660\profiles\default\sysext_manifest_classpath -Dweblogic.Name=AdminServer -Djava.security.policy=C:\bea\WLSERV~1.3\server\lib\weblogic.policy weblogic.Server
Error occurred during initialization of VM
Could not reserve enough space for object heap

Thanks Kevin. After reviewing the log file; the only problem I found is below.
But, all the other operations like copy/modify/create/delete went well. The complete log can be found Here
Do you think the upgrade Failed ? The log shows only it failed tried to delete nexaweb.log files
Thanks Much !
=========================================================================================
BUILD FAILED
C:\OIM\xellerate\Setup\setup.xml:448: The following error occurred while executing this line:
C:\OIM\xellerate\setup\***-setup.xml:266: Unable to delete file C:\OIM\xellerate\OIMApplications\WLNexaweb.ear\Nexaweb.war\logs\nexaweb.log
     at org.apache.tools.ant.ProjectHelper.addLocationToBuildException(ProjectHelper.java:539)
     at org.apache.tools.ant.taskdefs.Ant.execute(Ant.java:384)
     at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
     at org.apache.tools.ant.Task.perform(Task.java:364)
     at org.apache.tools.ant.Target.execute(Target.java:341)
     at org.apache.tools.ant.Target.performTasks(Target.java:369)
     at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1216)
     at org.apache.tools.ant.Project.executeTarget(Project.java:1185)
     at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:40)
     at org.apache.tools.ant.Project.executeTargets(Project.java:1068)
     at org.apache.tools.ant.Main.runBuild(Main.java:668)
     at org.apache.tools.ant.Main.startAnt(Main.java:187)
     at org.apache.tools.ant.Main.start(Main.java:150)
     at org.apache.tools.ant.Main.main(Main.java:240)
Caused by: C:\OIM\xellerate\setup\***-setup.xml:266: Unable to delete file C:\OIM\xellerate\OIMApplications\WLNexaweb.ear\Nexaweb.war\logs\nexaweb.log
     at org.apache.tools.ant.taskdefs.Delete.removeDir(Delete.java:594)
     at org.apache.tools.ant.taskdefs.Delete.removeDir(Delete.java:587)
     at org.apache.tools.ant.taskdefs.Delete.removeDir(Delete.java:587)
     at org.apache.tools.ant.taskdefs.Delete.removeDir(Delete.java:587)
     at org.apache.tools.ant.taskdefs.Delete.execute(Delete.java:498)
     at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
     at org.apache.tools.ant.Task.perform(Task.java:364)
     at org.apache.tools.ant.Target.execute(Target.java:341)
     at org.apache.tools.ant.Target.performTasks(Target.java:369)
     at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1216)
     at org.apache.tools.ant.helper.SingleCheckExecutor.executeTargets(SingleCheckExecutor.java:37)
     at org.apache.tools.ant.Project.executeTargets(Project.java:1068)
     at org.apache.tools.ant.taskdefs.Ant.execute(Ant.java:382)
     ... 12 more
--- Nested Exception ---
C:\OIM\xellerate\setup\***-setup.xml:266: Unable to delete file C:\OIM\xellerate\OIMApplications\WLNexaweb.ear\Nexaweb.war\logs\nexaweb.log
     at org.apache.tools.ant.taskdefs.Delete.removeDir(Delete.java:594)
     at org.apache.tools.ant.taskdefs.Delete.removeDir(Delete.java:587)
     at org.apache.tools.ant.taskdefs.Delete.removeDir(Delete.java:587)
     at org.apache.tools.ant.taskdefs.Delete.removeDir(Delete.java:587)
     at org.apache.tools.ant.taskdefs.Delete.execute(Delete.java:498)
     at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
     at org.apache.tools.ant.Task.perform(Task.java:364)
     at org.apache.tools.ant.Target.execute(Target.java:341)
     at org.apache.tools.ant.Target.performTasks(Target.java:369)
     at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1216)
     at org.apache.tools.ant.helper.SingleCheckExecutor.executeTargets(SingleCheckExecutor.java:37)
     at org.apache.tools.ant.Project.executeTargets(Project.java:1068)
     at org.apache.tools.ant.taskdefs.Ant.execute(Ant.java:382)
     at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
     at org.apache.tools.ant.Task.perform(Task.java:364)
     at org.apache.tools.ant.Target.execute(Target.java:341)
     at org.apache.tools.ant.Target.performTasks(Target.java:369)
     at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1216)
     at org.apache.tools.ant.Project.executeTarget(Project.java:1185)
     at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:40)
     at org.apache.tools.ant.Project.executeTargets(Project.java:1068)
     at org.apache.tools.ant.Main.runBuild(Main.java:668)
     at org.apache.tools.ant.Main.startAnt(Main.java:187)
     at org.apache.tools.ant.Main.start(Main.java:150)
     at org.apache.tools.ant.Main.main(Main.java:240)
Total time: 16 minutes 56 seconds
Edited by: Notorious Non-Confirmist on Sep 25, 2009 11:36 AM

Unable to run upgrade assistant utility in OIM 11.1.1.5

Hi
We are trying to upgrade OIM from 10g to 11g but when we run ua.bat(Located at MW_HOME/Oracle_<IDM_Home>/bin), we are getting the below error.
C:\Oracle\Middleware\Oracle_IDM1\bin>ua.bat
The system cannot find the path specified.
FINDSTR: Cannot open C:\Oracle\Middleware\Oracle_IDM1\upgrade\temp\jdk_version.log
Oracle Fusion Middleware Upgrade Assistant 11.1.1.5.1
Log file is located at: C:\Oracle\Middleware\Oracle_IDM1\upgrade\logs\ua2012-03-05-19-01-12PM.log
java.lang.UnsatisfiedLinkError: Can't load library: C:/Oracle/Middleware/Oracle_IDM1/oui/lib/win32/oraInstaller.dll
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1705)
at java.lang.Runtime.load0(Runtime.java:770)
at java.lang.System.load(System.java:1004)
at oracle.sysman.oii.oiip.osd.win32.OiipwWin32NativeCalls.loadNativeLib(OiipwWin32NativeCalls.java:1509)
at oracle.sysman.oii.oiip.osd.win32.OiipwWin32NativeCalls.<clinit>(OiipwWin32NativeCalls.java:50)
at oracle.sysman.oii.oiip.oiipg.OiipgEnvironment.getEnv(OiipgEnvironment.java:211)
at oracle.sysman.oii.oiip.oiipg.OiipgPropertyLoader.initUnixPtrFileLoc(OiipgPropertyLoader.java:213)
at oracle.sysman.oii.oiip.oiipg.OiipgPropertyLoader.<clinit>(OiipgPropertyLoader.java:126)
at oracle.sysman.oii.oiic.OiicStandardInventorySession.updateProperties(OiicStandardInventorySession.java:461)
at oracle.sysman.oii.oiic.OiicStandardInventorySession.initSession(OiicStandardInventorySession.java:257)
at oracle.sysman.oii.oiic.OiicStandardInventorySession.initSession(OiicStandardInventorySession.java:232)
at oracle.sysman.oii.oiic.OiicStandardInventorySession.initSession(OiicStandardInventorySession.java:181)
at oracle.ias.upgrade.OUIInventory.initAll(OUIInventory.java:86)
at oracle.ias.upgrade.gui.UAWizard.init(UAWizard.java:446)
at oracle.ias.upgrade.UpgradeDriver.gui(UpgradeDriver.java:276)
at oracle.ias.upgrade.UpgradeDriver.main(UpgradeDriver.java:179)
UPGAST-00055: error reading the Oracle Universal Installer inventory
no oraInstaller in java.library.path
But the folder created at the time of installation was C:\Oracle\Middleware\Oracle_IDM1\oui\lib\win64\oraInstaller.dll.
We even modified ua.bat file to take the above path but no result.
How to resolve the issue?

Similar issue installing OIM 11.1.1.6 on Win7 64 bit:
C:\Users\OIM_VM\AppData\Local\Temp>C:\Oracle\Middleware\Oracle_IDM1\OPatch\opatch apply C:\Oracle\Middleware\Oracle_IDM1\oneoffpatches\p7663342_111070_Generic.zip -oh C:\Oracle\Middleware\Oracle_IDM1 -silent
Oracle Interim Patch Installer version 11.1.0.9.0
Copyright (c) 2011, Oracle Corporation. All rights reserved.
java.lang.UnsatisfiedLinkError: Can't load library: C:/Oracle/Middleware/Oracle_IDM1/oui/lib/win32/oraInstaller.dll
     at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1705)
     at java.lang.Runtime.load0(Runtime.java:770)
     at java.lang.System.load(System.java:1004)
     at oracle.sysman.oii.oiip.osd.win32.OiipwWin32NativeCalls.loadNativeLib(OiipwWin32NativeCalls.java:1509)
     at oracle.sysman.oii.oiip.osd.win32.OiipwWin32NativeCalls.<clinit>(OiipwWin32NativeCalls.java:50)
     at oracle.sysman.oii.oiip.oiipg.OiipgEnvironment.getEnv(OiipgEnvironment.java:211)
     at oracle.sysman.oii.oiix.OiixEnvironmentOps.getEnv(OiixEnvironmentOps.java:53)
     at oracle.opatch.OUIReplacer.getEnv(OUIReplacer.java:374)
     at oracle.opatch.CmdLineParser.parse(CmdLineParser.java:970)
     at oracle.opatch.OPatchSession.main(OPatchSession.java:1314)
     at oracle.opatch.OPatch.main(OPatch.java:573)
Installer stops on step 15 of 16. The task that fails is "Start Oracle Internet Directory"
Did someone managed to overcome that issue ?

OIM 9.1.0.2 upgrade - error

Hello Experts,
Currently I am using OIM 9.1.0.1 (Version: 9.1.0.1860.16 Build 1860.16 ) and trying to upgrade it to 9.1.0.2. Downloaded the 9.1.0.2 base (p8484010_9102_Generic.zip) from metalink.
1. Taken the necessary backup.
2. Upgrading Oracle Identity Manager Database on Oracle Database --- here it fails
When I issue the below command it fails with error message
PATCH/db/oracle/Scripts/oim_db_upg_910_to_9102.cmd OIMDB D:\oracle\ora92 xelsysadm xelsyspassword D:\PATCH
Error:
Log file "oim_db_upg_9101_to_9102.log" contains the below errors
-- START : upg_9102.sql
ERROR at line 79:
ORA-06550: line 79, column 2:
PLS-00103: Encountered the symbol "/"
Elapsed: 00:00:00.00
DECLARE
ERROR at line 1:
ORA-00942: table or view does not exist
ORA-06512: at line 9
Elapsed: 00:00:00.01
SELECT count() into row_cnt FROM SIL_TYPE_CATEGORY where SIL_TYPE_CATEGORY_NAME= 'System_Type';*
Can u assist me?
Thanks & Regards
INIYA

It contains almost 2500 lines... and exceeds the maximum length...
I just pasted around 300 lines...
-- upg_910x.sql
-- Copyright (c) 2009, Oracle and/or its affiliates. All rights reserved.
-- NAME
-- upg_910x.sql - <one-line expansion of the name>
-- DESCRIPTION
-- <short description of component this file declares/defines>
-- NOTES
-- <other useful comments, qualifications, etc.>
-- MODIFIED (MM/DD/YY)
-- apitre 04/28/09 - Remove 9102_dml_insert_pty_HideObjectForm.sql from
-- upg_9102.sql
-- neegoel 02/02/09 - Created
/*==============================================================*/
/* File Name: 9102_ddl_SoDInvocationDBScript.sql */
/* Database name: SoD Invocation Framework Database(Modified) */
/* DBMS name: ORACLE           */
/* Created by:     Shikha */
/*==============================================================*/
--BLOCK 1 : This block creates all sequences for SoD Invocation Framework database
DECLARE
cnt int;
BEGIN
Select count(1) into cnt from user_sequences where Sequence_name = 'SIL_SCO_STY_JOIN_SEQ';
IF Cnt = 0 Then
Begin
EXECUTE IMMEDIATE 'create sequence SIL_SCO_STY_JOIN_SEQ increment by 1 start with 1 cache 20';
End;
Else
DBMS_OUTPUT.PUT_LINE ('Sequence SIL_SCO_STY_JOIN_SEQ Already exists');
End IF;
Select count(1) into cnt from user_sequences where Sequence_name = 'SIL_SYSTEM_TYPE_SEQ';
IF Cnt = 0 Then
Begin
EXECUTE IMMEDIATE 'create sequence SIL_SYSTEM_TYPE_SEQ increment by 1 start with 1 cache 20';
End;
Else
DBMS_OUTPUT.PUT_LINE ('Sequence SIL_SYSTEM_TYPE_SEQ Already exists');
End IF;
Select count(1) into cnt from user_sequences where Sequence_name = 'SIL_SERVICE_COMP_SEQ';
IF Cnt = 0 Then
Begin
EXECUTE IMMEDIATE 'create sequence SIL_SERVICE_COMP_SEQ increment by 1 start with 1 cache 20';
End;
Else
DBMS_OUTPUT.PUT_LINE ('Sequence SIL_SERVICE_COMP_SEQ Already exists');
End IF;
Select count(1) into cnt from user_sequences where Sequence_name = 'SIL_SYSTEM_SEQ';
IF Cnt = 0 Then
Begin
EXECUTE IMMEDIATE 'create sequence SIL_SYSTEM_SEQ increment by 1 start with 1 cache 20';
End;
Else
DBMS_OUTPUT.PUT_LINE ('Sequence SIL_SYSTEM_SEQ Already exists');
End IF;
Select count(1) into cnt from user_sequences where Sequence_name = 'SIL_TYPES_SEQ';
IF Cnt = 0 Then
Begin
EXECUTE IMMEDIATE 'create sequence SIL_TYPES_SEQ increment by 1 start with 1 cache 20';
End;
Else
DBMS_OUTPUT.PUT_LINE ('Sequence SIL_TYPES_SEQ Already exists');
End IF;
Select count(1) into cnt from user_sequences where Sequence_name = 'SIL_TYPE_CATEGORY_SEQ';
IF Cnt = 0 Then
Begin
EXECUTE IMMEDIATE 'create sequence SIL_TYPE_CATEGORY_SEQ increment by 1 start with 1 cache 20';
End;
Else
DBMS_OUTPUT.PUT_LINE ('Sequence SIL_TYPE_CATEGORY_SEQ Already exists');
End IF;
Select count(1) into cnt from user_sequences where Sequence_name = 'SIL_ASYNCH_INFO_SEQ';
IF Cnt = 0 Then
Begin
EXECUTE IMMEDIATE 'create sequence SIL_ASYNCH_INFO_SEQ increment by 1 start with 1 cache 20';
End;
Else
DBMS_OUTPUT.PUT_LINE ('Sequence SIL_ASYNCH_INFO_SEQ Already exists');
End IF;
Select count(1) into cnt from user_sequences where Sequence_name = 'SIL_PARAMETERS_SEQ';
IF Cnt = 0 Then
Begin
EXECUTE IMMEDIATE 'create sequence SIL_PARAMETERS_SEQ increment by 1 start with 1 cache 20';
End;
Else
DBMS_OUTPUT.PUT_LINE ('Sequence SIL_PARAMETERS_SEQ Already exists');
End IF;
END;
--BLOCK 2: This block creates all tables/indexes, and apply constraints for SoD Invocation Framework database
DECLARE
cnt int;
BEGIN
Select count(1) into cnt from USER_TABLES where Table_name = 'SIL_SCO_STY_JOIN';
IF Cnt = 0 Then
Begin
EXECUTE IMMEDIATE 'create table SIL_SCO_STY_JOIN (
SIL_SERVICE_COMP_KEY NUMBER(19) Not null,
SIL_SYSTEM_TYPE_KEY NUMBER(19) Not null,
SIL_SCO_STY_JOIN_DATA_LEVEL NUMBER(1),
SIL_SCO_STY_JOIN_CREATE DATE,
SIL_SCO_STY_JOIN_CREATEBY NUMBER(19),
SIL_SCO_STY_JOIN_UPDATE DATE,
SIL_SCO_STY_JOIN_UPDATEBY NUMBER(19),
SIL_SCO_STY_JOIN_NOTE CLOB,
SIL_SCO_STY_JOIN_ROWVER RAW(8),
constraint PK_SIL_SCO_STY_JOIN primary key (SIL_SERVICE_COMP_KEY, SIL_SYSTEM_TYPE_KEY)
dbms_output.put_line ('Table SIL_SCO_STY_JOIN created');
End;
Else
DBMS_OUTPUT.PUT_LINE ('Table SIL_SCO_STY_JOIN exists');
End IF;
Select count(1) into cnt from USER_TABLES where Table_name = 'SIL_SYSTEM_TYPE';
IF Cnt = 0 Then
Begin
EXECUTE IMMEDIATE 'create table SIL_SYSTEM_TYPE (
SIL_SYSTEM_TYPE_KEY NUMBER(19) not null,
SIL_TYPES_KEY NUMBER(19) not null,
SIL_SYSTEM_TYPE_INFO_XML CLOB,
SIL_SYSTEM_TYPE_NAME VARCHAR2(255),
SIL_SYSTEM_TYPE_DATA_LEVEL NUMBER(1),
SIL_SYSTEM_TYPE_CREATE DATE,
SIL_SYSTEM_TYPE_CREATEBY NUMBER(19),
SIL_SYSTEM_TYPE_UPDATE DATE,
SIL_SYSTEM_TYPE_UPDATEBY NUMBER(19),
SIL_SYSTEM_TYPE_NOTE CLOB,
SIL_SYSTEM_TYPE_ROWVER RAW(8),
constraint PK_SIL_SYSTEM_TYPE primary key (SIL_SYSTEM_TYPE_KEY)
dbms_output.put_line ('Table SIL_SYSTEM_TYPE created');
End;
Else
DBMS_OUTPUT.PUT_LINE ('Table SIL_SYSTEM_TYPE exists');
End IF;
Select count(1) into cnt from USER_TABLES where Table_name = 'SIL_SERVICE_COMP';
IF Cnt = 0 Then
Begin
EXECUTE IMMEDIATE 'create table SIL_SERVICE_COMP (
SIL_SERVICE_COMP_KEY NUMBER(19) not null,
SIL_TYPES_KEY NUMBER(19) not null,
SIL_SERVICE_COMP_SERVICE_NAME VARCHAR2(255),
SIL_SERVICE_COMP_INFO_XML CLOB,
SIL_SERVICE_COMP_CLASS VARCHAR2(255),
SIL_SERVICE_COMP_DATA_LEVEL NUMBER(1),
SIL_SERVICE_COMP_CREATE DATE,
SIL_SERVICE_COMP_CREATEBY NUMBER(19),
SIL_SERVICE_COMP_UPDATE DATE,
SIL_SERVICE_COMP_UPDATEBY NUMBER(19),
SIL_SERVICE_COMP_NOTE CLOB,
SIL_SERVICE_COMP_ROWVER RAW(8),
constraint PK_SIL_SERVICE_COMP_KEY primary key (SIL_SERVICE_COMP_KEY)
dbms_output.put_line ('Table SIL_SERVICE_COMP created');
End;
Else
DBMS_OUTPUT.PUT_LINE ('Table SIL_SERVICE_COMP exists');
End IF;
Select count(1) into cnt from USER_TABLES where Table_name = 'SIL_SYSTEM';
IF Cnt = 0 Then
Begin
EXECUTE IMMEDIATE 'create table SIL_SYSTEM (
SIL_SYSTEM_KEY NUMBER(19) not null,
SIL_SYSTEM_TYPE_KEY NUMBER(19) not null,
SIL_SYSTEM_NAME VARCHAR2(255),
SIL_SYSTEM_DATA_LEVEL NUMBER(1),
SIL_SYSTEM_CREATE DATE,
SIL_SYSTEM_CREATEBY NUMBER(19),
SIL_SYSTEM_UPDATE DATE,
SIL_SYSTEM_UPDATEBY NUMBER(19),
SIL_SYSTEM_NOTE CLOB,
SIL_SYSTEM_ROWVER RAW(8),
constraint PK_SIL_SYSTEM primary key (SIL_SYSTEM_KEY)
dbms_output.put_line ('Table SIL_SYSTEM created');
End;
Else
DBMS_OUTPUT.PUT_LINE ('Table SIL_SYSTEM exists');
End IF;
Select count(1) into cnt from USER_TABLES where Table_name = 'SIL_TYPES';
IF Cnt = 0 Then
Begin
EXECUTE IMMEDIATE 'create table SIL_TYPES (
SIL_TYPES_KEY NUMBER(19) not null,
SIL_TYPE_CATEGORY_KEY NUMBER(19) not null,
SIL_TYPES_NAME VARCHAR2(255),
SIL_TYPES_DATA_LEVEL NUMBER(1),
SIL_TYPES_CREATE DATE,
SIL_TYPES_CREATEBY NUMBER(19),
SIL_TYPES_UPDATE DATE,
SIL_TYPES_UPDATEBY NUMBER(19),
SIL_TYPES_NOTE CLOB,
SIL_TYPES_ROWVER RAW(8),
constraint PK_SIL_TYPES primary key (SIL_TYPES_KEY)
dbms_output.put_line ('Table SIL_TYPES created');
End;
Else
DBMS_OUTPUT.PUT_LINE ('Table SIL_TYPES exists');
End IF;
Select count(1) into cnt from USER_TABLES where Table_name = 'SIL_TYPE_CATEGORY';
IF Cnt = 0 Then
Begin
EXECUTE IMMEDIATE 'create table SIL_TYPE_CATEGORY (
SIL_TYPE_CATEGORY_KEY NUMBER(19) not null,
SIL_TYPE_CATEGORY_NAME VARCHAR2(255),
SIL_TYPE_CATEGORY_DATA_LEVEL NUMBER(1),
SIL_TYPE_CATEGORY_CREATE DATE,
SIL_TYPE_CATEGORY_CREATEBY NUMBER(19),
SIL_TYPE_CATEGORY_UPDATE DATE,
SIL_TYPE_CATEGORY_UPDATEBY NUMBER(19),
SIL_TYPE_CATEGORY_NOTE CLOB,
SIL_TYPE_CATEGORY_ROWVER RAW(8),
constraint PK_SIL_TYPE_CATEGORY primary key (SIL_TYPE_CATEGORY_KEY)
dbms_output.put_line ('Table SIL_TYPE_CATEGORY created');
End;
Else
DBMS_OUTPUT.PUT_LINE ('Table SIL_TYPE_CATEGORY exists');
End IF;
Select count(1) into cnt from USER_TABLES where Table_name = 'SIL_ASYNCH_INFO';
IF Cnt = 0 Then
Begin
EXECUTE IMMEDIATE 'create table SIL_ASYNCH_INFO (
SIL_ASYNCH_INFO_KEY NUMBER(19) not null,
SIL_SYSTEM_KEY NUMBER(19) not null,
SIL_ASYNCH_INFO_IDM_OPER_ID NUMBER(19),
SIL_ASYNCH_INFO_SOD_ANL_ID NUMBER(19),
SIL_ASYNCH_INFO_ANL_TYPE VARCHAR2(255),
SIL_ASYNCH_INFO_ANL_RESULT VARCHAR2(255),
SIL_ASYNCH_INFO_CURRENT_STA VARCHAR2(255),
SIL_ASYNCH_INFO_DATA_LEVEL NUMBER(1),
SIL_ASYNCH_INFO_CREATE DATE,
SIL_ASYNCH_INFO_CREATEBY NUMBER(19),
SIL_ASYNCH_INFO_UPDATE DATE,
SIL_ASYNCH_INFO_UPDATEBY NUMBER(19),
SIL_ASYNCH_INFO_NOTE CLOB,
SIL_ASYNCH_INFO_ROWVER RAW(8),
constraint PK_SIL_ASYNCH_INFO primary key (SIL_ASYNCH_INFO_KEY)
dbms_output.put_line ('Table SIL_ASYNCH_INFO created');
End;
Else
DBMS_OUTPUT.PUT_LINE ('Table SIL_ASYNCH_INFO exists');
End IF;
Select count(1) into cnt from USER_TABLES where Table_name = 'SIL_PARAMETERS';
IF Cnt = 0 Then
Begin
EXECUTE IMMEDIATE 'create table SIL_PARAMETERS (
SIL_PARAMETERS_KEY NUMBER(19) not null,
SIL_SYSTEM_KEY NUMBER(19) not null,
SIL_PARAMETERS_NAME VARCHAR2(255),
SIL_PARAMETERS_VALUE VARCHAR2(255),
SIL_PARAMETERS_DATA_LEVEL NUMBER(1),
SIL_PARAMETERS_CREATE DATE,
SIL_PARAMETERS_CREATEBY NUMBER(19),
SIL_PARAMETERS_UPDATE DATE,
SIL_PARAMETERS_UPDATEBY NUMBER(19),
SIL_PARAMETERS_NOTE CLOB,
SIL_PARAMETERS_ROWVER RAW(8),
constraint PK_SIL_PARAMETERS primary key (SIL_PARAMETERS_KEY)
dbms_output.put_line ('Table SIL_PARAMETERS created');
End;
Else
DBMS_OUTPUT.PUT_LINE ('Table SIL_PARAMETERS exists');
End IF;
END;
DECLARE
cnt int;
BEGIN
SELECT COUNT(1) into cnt FROM USER_CONSTRAINTS WHERE constraint_name = 'SIL_SCO_STY_JOIN_FK1';
IF Cnt = 0 Then
     EXECUTE IMMEDIATE 'alter table SIL_SCO_STY_JOIN add CONSTRAINT SIL_SCO_STY_JOIN_FK1 FOREIGN KEY (SIL_SYSTEM_TYPE_KEY) REFERENCES SIL_SYSTEM_TYPE (SIL_SYSTEM_TYPE_KEY)';
     END IF;
     SELECT COUNT(1) into cnt FROM USER_CONSTRAINTS WHERE constraint_name = 'SIL_SCO_STY_JOIN_FK2';
IF Cnt = 0 Then
     EXECUTE IMMEDIATE 'alter table SIL_SCO_STY_JOIN add CONSTRAINT SIL_SCO_STY_JOIN_FK2 FOREIGN KEY (SIL_SERVICE_COMP_KEY) REFERENCES SIL_SERVICE_COMP (SIL_SERVICE_COMP_KEY)';
     END IF;
     SELECT COUNT(1) into cnt FROM USER_CONSTRAINTS WHERE constraint_name = 'SIL_SYSTEM_TYPE_FK1';
IF Cnt = 0 Then
EXECUTE IMMEDIATE 'alter table SIL_SYSTEM_TYPE add CONSTRAINT SIL_SYSTEM_TYPE_FK1 FOREIGN KEY (SIL_TYPES_KEY) REFERENCES SIL_TYPES(SIL_TYPES_KEY)';
     END IF;
     SELECT COUNT(1) into cnt FROM USER_CONSTRAINTS WHERE constraint_name = 'SIL_SERVICE_COMP_FK1';
IF Cnt = 0 Then
          EXECUTE IMMEDIATE 'alter table SIL_SERVICE_COMP add CONSTRAINT SIL_SERVICE_COMP_FK1 FOREIGN KEY (SIL_TYPES_KEY) REFERENCES SIL_TYPES(SIL_TYPES_KEY)';
END IF;
     SELECT COUNT(1) into cnt FROM USER_CONSTRAINTS WHERE constraint_name = 'SIL_SYSTEM_FK1';
IF Cnt = 0 Then
          EXECUTE IMMEDIATE 'alter table SIL_SYSTEM add CONSTRAINT SIL_SYSTEM_FK1 FOREIGN KEY (SIL_SYSTEM_TYPE_KEY) REFERENCES SIL_SYSTEM_TYPE(SIL_SYSTEM_TYPE_KEY)';
END IF;
     SELECT COUNT(1) into cnt FROM USER_CONSTRAINTS WHERE constraint_name = 'SIL_TYPES_FK1';
IF Cnt = 0 Then
          EXECUTE IMMEDIATE 'alter table SIL_TYPES add CONSTRAINT SIL_TYPES_FK1 FOREIGN KEY (SIL_TYPE_CATEGORY_KEY) REFERENCES SIL_TYPE_CATEGORY(SIL_TYPE_CATEGORY_KEY)';
     END IF;
     SELECT COUNT(1) into cnt FROM USER_CONSTRAINTS WHERE constraint_name = 'SIL_ASYNCH_INFO_FK1';
IF Cnt = 0 Then
          EXECUTE IMMEDIATE 'alter table SIL_ASYNCH_INFO add CONSTRAINT SIL_ASYNCH_INFO_FK1 FOREIGN KEY (SIL_SYSTEM_KEY) REFERENCES SIL_SYSTEM(SIL_SYSTEM_KEY)';
END IF;
     SELECT COUNT(1) into cnt FROM USER_CONSTRAINTS WHERE constraint_name = 'SIL_PARAMETERS_FK1';
IF Cnt = 0 Then
          EXECUTE IMMEDIATE 'alter table SIL_PARAMETERS add CONSTRAINT SIL_PARAMETERS_FK1 FOREIGN KEY (SIL_SYSTEM_KEY) REFERENCES SIL_SYSTEM(SIL_SYSTEM_KEY)';
     END IF;
END;
/

Error during OIM schema upgrade during product ugprade from 9.1.0.2 to 11g

Hi All,
We have received following error during product upgrade from 9.1.0.2 to 11g.
Error occurred during fourth step ( Task 4: Use Upgrade Assistant to Upgrade the Oracle Identity Manager Schema)
On the screen while running upgrade assistance (ua.bat)
Following message came on screen.
Schema Version registry >> succeeded
Oracle Identity Manager Schema Upgrade >> Failed
I could see only following error in the log file.
\middleware_home\Oracle_IDM1/server/db/oim/oracle/Upgrade/Oracle_upg_91_92_x2ell_92.sql
[2012-06-28T09:34:51.147-06:00] [FrameworkMR] [NOTIFICATION] [] [upgrade.FrameworkMR] [tid: 14] [ecid: 0000JWnikOB6qIvyKWYBSQ1Fv7Zd000005,0] finalize() instance 1 of 2
[2012-06-28T09:35:00.863-06:00] [OIM] [INCIDENT_ERROR] [] [upgrade.OIM] [tid: 13] [ecid: 0000JWnijRj6qIvyKWYBSQ1Fv7Zd000004,0] UPGCMP-00924: SQL error [{0}]
[2012-06-28T09:35:00.863-06:00] [OIM] [INCIDENT_ERROR] [] [upgrade.OIM] [tid: 13] [ecid: 0000JWnijRj6qIvyKWYBSQ1Fv7Zd000004,0] [[
java.sql.SQLSyntaxErrorException: ORA-00955: name is already used by an existing object
ORA-06512: at line 31
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:457)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:405)
     at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:889)
     at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:476)
     at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:204)
     at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:540)
     at oracle.jdbc.driver.T4CStatement.doOall8(T4CStatement.java:202)
     at oracle.jdbc.driver.T4CStatement.executeForRows(T4CStatement.java:1074)
     at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1466)
     at oracle.jdbc.driver.OracleStatement.executeUpdateInternal(OracleStatement.java:2123)
     at oracle.jdbc.driver.OracleStatement.executeUpdate(OracleStatement.java:2067)
     at oracle.jdbc.driver.OracleStatementWrapper.executeUpdate(OracleStatementWrapper.java:306)
     at oracle.ias.mrua.plugin.oim.SchemaUpgrader.loadScript(SchemaUpgrader.java:303)
     at oracle.ias.mrua.plugin.oim.SchemaUpgrader.doUpgrade(SchemaUpgrader.java:139)
     at oracle.ias.mrua.plugin.oim.OIMSchemaUpgradePlugin.doUpgrade(OIMSchemaUpgradePlugin.java:302)
     at oracle.ias.mrua.MRUA.executePlugins(MRUA.java:3672)
     at oracle.ias.mrua.MRUA.internal_driver(MRUA.java:2448)
     at oracle.ias.mrua.MRUA.driver(MRUA.java:1710)
     at oracle.ias.upgrade.gui.UAUpgradeThread.run(UAUpgradeThread.java:390)
Any Idea ?
Ritu

Hi All,
We are also trying to upgrade OIM 9.1.0.2 which is present in our environment to OIM11g. Request your help.
Now how do we achieve the upgrade? Should my source of OIM9i software and target of OIM 11g software be installed on the same server?
I did install OIM11g and OIM9i on the same server and tried to do schema upgrade based on the link:
Upgrading Oracle Identity Manager Environment
But during examine phase I get error the below error
UPGAST 00091- ERROR DURING EXAMINE OF COMPONENETS
UPGAST 01004- UPGRADE IS UNABLE TO DYNAMICALLY LOAD COMPONENET SPECIFIC SOFTWARE MODULES.
When i check in the log in internet it says :
Cause: Repository upgrade framework was unable to dynamically load the Java classes of its component-specific software modules. mrua.xml file might have been corrupted.
Action: This is an internal error. Verify that the Java classpath has been correctly set, the mrua.xml file is correct, and that the .jar files for all component-specific software modules are present in the jlib directory. Contact Oracle Support Services for assistance
What is the javaclasspath to be set?how to check if mrua.xml and jar files are fine
Pls help.Any help is much appreciated.

OIM upgrade

Similar Messages

Maybe you are looking for