OIM user-defined field lookup

Hi,
I've installed OIM connected to OID.
Now if I want to create a new user-defined (in user creation profile)field say... Job-Band (and populate the drop down for Job-Band with values A,B,C,D... etc.) ,what steps do i need to follow.
Edited by: Chhavi Saluja on Feb 7, 2010 10:29 PM

Hi,
if i understand your question correctly,you want to create a new UDF(user defined field) i the user profile for this you need to cretae a udf from the design console, in your case you need to select the users in the form name as you want to add a field in the profile,.
Select Lookup in the field type after that click on the Properties there you need to attach the lookup corresponding to this in the Lookup code, for this you need to create a lookup with your values that you want show values. Over here you attach this.
Hope this helps you
Regards
VM

Similar Messages

  • OIM user defined field in process form

    I am trying to create a user defined field (UDF) in a process form. The UDF would be a drop down list of values for the status field.
    I've tried to do this by going to the Administration list, and double clicking on User Defined Field Definition. Then selecting the Form Designer. I can add a column but I cannot add values to the drop down. I know I'm probably doing this wrong.
    How do I add a UDF drop down and its values to a process form?
    Thanks!

    1. Create lookup table for the drop down contents.
    2.In the process form--->go to the properties tab-->select the User defined filed name-->add property--->property Name drop down list -->select lookup code-->in the property value-->provide the lookup table name-->save
    Edited by: user13513300 on Feb 24, 2011 1:45 AM

  • OIM User Defined field as CLOB

    Hi All,
    is it possible to make a UDF a CLOB? if so.. How?
    Thanx
    Fred

    I had to revamp some code to get around the problem. we needed a field to trigger a change event but did not
    realize till last minute the potential size of the data.
    Thanx.

  • Multi Value User Defined field on OIM user form

    Hi Everyone,
    I have a requirement where i need to assign multiple resources to user as per access policy. These resources should be assign by virtue of some role (custom attribute as of now). The specific requirement is that one user may have multiple roles (and hence resources) and all these values should capture in any user defined field. As the requirement contains multiple Roles so we have to create multi-value user defined field for User form to capture all these role values under single attribute. Does OIM provides any such multi-value field OOTB (lookup, drop down--any customize way we can make them multivalue)?

    He's right. Multi Valued attributes on the User Profile are not available in OIM. If you want to do this, and you have a finite number of possible roles, you can create UDFs for each and map a checkbox or something to it if the user has that value. Then base your acccess policies off those.
    -Kevin

  • Issue while deleting user defined field in oim 11.1.1.3

    All,
    Made a mistake while creating user defined field called "Profile for" (loing to OIM -> advanced -> configuration -> User configuration). We are trying to delete it. It appears to get deleted from user attributes screen. But when we run LDAP User Create and Update Reconciliation Task we get the following error below:
    oracle.iam.ldapsync.exception.ProcessLDAPReconDataException: oracle.iam.ldapsync.exception.ReconEventCreationException: Thor.API.Exceptions.tcAPIException: Profile for - LDAPUser object does not exists for resource object
    Is any thing else need to be deleted adn cleaned up?
    thanks in advance,
    Prasad.

    How do i check what resource object the recon task is running against. here is what i found so far.
    I cannot find LDAPUser resource object when i query Resource Management -> Resource Objects in design console. Same thing with Manage Resource and search (here i only find Xellerate User, Xellerate Organiztion, USERS_GTC, and Installation) in OIM advanced administration menu.
    The LDAP User Create and Update Reconciliation job itself has the following parameters (batch size, last change number, OIM employee type, OIM User organization name, OIM user type)
    I also decompiled LDAPUserChangesReconTask and it is looking for LDAPUser metadata from MDS directly.
    Prasad.

  • USR user defined field in OIM design console in not visible

    Hi all,
    We have OIM setup in the environment and wanted to add some custom attributes for USR user defined field definition. When I open the User Defined Field Definition tab, I could not see USR form. When I tried to export specific users from OIM just to check whether USR is visible or not, it is appearing. When I tried to import the same set of users again to OIM, I could still not be able to see USR in OIM design console.
    Any ideas why this has happened? There were no changes in OIM env recently.
    Please help.
    -Mahendra.

    Exported the user in xml file and found that Form Administrator is missing. I added that specific section from other working environment and it is working fine now.
    -Mahendra.

  • Validating User Defined Fields on the OIM User Object

    Hello everyone,
    I'm currently using the OIM 11g, and am curious how to provide data validation for user defined fields.
    We currently have two user-defined fields for day of birth and month of birth, which have been set to required, but I would like to take this a step further and actually validate that the data being entered is numerical (two characters max), and if it's not, a red box appears around the field notifying the admin that the entry needs to fit the expected criteria.
    One example already in OIM is that of the email field. It appears to be using a regex to identify that data entered is of a certain format.
    Can anyone here point me in the direction of some proper documentation so that I may learn how to incorporate this into my environment? Thanks!

    Hi Kate,
    The only way to do it, is with Form Settings. Do not give them authorisations on Form Settings. You can then untick the "Active" tick box on certain fields and tick it on others. This can then be done, when you log on as the user him/herself.
    Regards
    Carin

  • USER DEFINED FIELD ERROR

    Hi,
    The following is the setup.
    1. I defined a DBAT - ORACLE CONNECTOR and was able to provision users to it.
    2. Then I defined an user defined field in OIM i.e.
    2.1 added in the User defined field list in Users form - branch
    2.2 Added the entry with proper tags in formmetadata.xml
    2.3 And also updated it in the xlWebAdmin_en_US.properties file
    3. Restarted the server.
    4. And in the DBAT provisioning process added a new task, attached a process task adapter in integration.
    4.1 in Adapter variable mapping
    Adapter return value
    Map to - Process Data
    Qualifier - DEFAULT_BRANCH ( I think target attribute name)
    4.2 input value
    Map to - user definition
    qualifier - branch
    5. Added the USR_UDF_BRANCH CODE , Update DEFAULT_BRANCH to the the lookup usr process triggers.
    When an end user modifies from the account profile, it only reflects in the process form and not in the target table
    It gives the following error and also an error for email notification which i have not configured. it is using OOTB user profile edit process.
    ition xml of the connector 'DBPCAT'
    16:10:23,609 ERROR [REQUESTS] Class/Method: tcEmailNotificationUtil/sendEmail encounter some problems: {1}
    java.lang.NullPointerException
    at java.util.Hashtable.put(Hashtable.java:394)
    at com.thortech.xl.dataobj.util.tcEmailNotificationUtil.sendEmail(Unknown Source)
    at com.thortech.xl.dataobj.util.tcEmailNotificationUtil.sendEmailNotification(Unknown Source)
    at com.thortech.xl.ejb.beansimpl.tcRequestOperationsBean.createProfileModifyRequest(Unknown Source)
    at com.thortech.xl.ejb.beans.tcRequestOperationsSession.createProfileModifyRequest(Unknown Source)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at org.jboss.invocation.Invocation.performCall(Invocation.java:359)
    at org.jboss.ejb.StatelessSessionContainer$ContainerInterceptor.invoke(StatelessSessionContainer.java:237)
    at org.jboss.resource.connectionmanager.CachedConnectionInterceptor.invoke(CachedConnectionInterceptor.java:158)
    at org.jboss.ejb.plugins.StatelessSessionInstanceInterceptor.invoke(StatelessSessionInstanceInterceptor.java:169)
    at org.jboss.ejb.plugins.CallValidationInterceptor.invoke(CallValidationInterceptor.java:63)
    at org.jboss.ejb.plugins.AbstractTxInterceptor.invokeNext(AbstractTxInterceptor.java:121)
    at org.jboss.ejb.plugins.TxInterceptorCMT.runWithTransactions(TxInterceptorCMT.java:350)
    at org.jboss.ejb.plugins.TxInterceptorCMT.invoke(TxInterceptorCMT.java:181)
    at org.jboss.ejb.plugins.SecurityInterceptor.invoke(SecurityInterceptor.java:168)
    at org.jboss.ejb.plugins.LogInterceptor.invoke(LogInterceptor.java:205)
    at org.jboss.ejb.plugins.ProxyFactoryFinderInterceptor.invoke(ProxyFactoryFinderInterceptor.java:138)
    at org.jboss.ejb.SessionContainer.internalInvoke(SessionContainer.java:648)
    at org.jboss.ejb.Container.invoke(Container.java:960)
    at sun.reflect.GeneratedMethodAccessor127.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at org.jboss.mx.interceptor.ReflectedDispatcher.invoke(ReflectedDispatcher.java:155)
    at org.jboss.mx.server.Invocation.dispatch(Invocation.java:94)
    at org.jboss.mx.server.Invocation.invoke(Invocation.java:86)
    at org.jboss.mx.server.AbstractMBeanInvoker.invoke(AbstractMBeanInvoker.java:264)
    at org.jboss.mx.server.MBeanServerImpl.invoke(MBeanServerImpl.java:659)
    at org.jboss.invocation.local.LocalInvoker$MBeanServerAction.invoke(LocalInvoker.java:169)
    at org.jboss.invocation.local.LocalInvoker.invoke(LocalInvoker.java:118)
    at org.jboss.invocation.InvokerInterceptor.invokeLocal(InvokerInterceptor.java:209)
    at org.jboss.invocation.InvokerInterceptor.invoke(InvokerInterceptor.java:195)
    at org.jboss.proxy.TransactionInterceptor.invoke(TransactionInterceptor.java:61)
    at org.jboss.proxy.SecurityInterceptor.invoke(SecurityInterceptor.java:70)
    at org.jboss.proxy.ejb.StatelessSessionInterceptor.invoke(StatelessSessionInterceptor.java:112)
    at org.jboss.proxy.ClientContainer.invoke(ClientContainer.java:100)
    at $Proxy778.createProfileModifyRequest(Unknown Source)
    at Thor.API.Operations.tcRequestOperationsClient.createProfileModifyRequest(Unknown Source)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at Thor.API.Base.SecurityInvocationHandler$1.run(Unknown Source)
    at Thor.API.Security.LoginHandler.jbossLoginSession.runAs(Unknown Source)
    at Thor.API.Base.SecurityInvocationHandler.invoke(Unknown Source)
    at $Proxy806.createProfileModifyRequest(Unknown Source)
    at com.thortech.xl.webclient.actions.tcModifyProfileAction.modifyUser(Unknown Source)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at org.apache.struts.actions.DispatchAction.dispatchMethod(DispatchAction.java:280)
    at com.thortech.xl.webclient.actions.tcLookupDispatchAction.execute(Unknown Source)
    at com.thortech.xl.webclient.actions.tcActionBase.execute(Unknown Source)
    at com.thortech.xl.webclient.actions.tcAction.execute(Unknown Source)
    at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
    at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
    at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
    at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:525)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:710)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
    at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
    at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
    at com.thortech.xl.webclient.security.SecurityFilter.doFilter(Unknown Source)
    at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
    at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
    at org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:96)
    at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
    at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
    at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:230)
    at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:175)
    at org.jboss.web.tomcat.security.SecurityAssociationValve.invoke(SecurityAssociationValve.java:182)
    at org.jboss.web.tomcat.security.JaccContextValve.invoke(JaccContextValve.java:84)
    at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127)
    at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
    at org.jboss.web.tomcat.service.jca.CachedConnectionValve.invoke(CachedConnectionValve.java:157)
    at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
    at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:262)
    at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:844)
    at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:583)
    at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:446)
    at java.lang.Thread.run(Thread.java:619)
    16:10:32,078 INFO [STDOUT] Running GENERICADAPTER
    16:10:32,078 INFO [STDOUT] Target Class = com.thortech.xl.gc.runtime.GCAdapterLibrary
    16:10:33,250 ERROR [APIS]
    java.lang.NullPointerException
    at com.thortech.xl.ejb.beansimpl.GCOperationsBean.getModelFromConnectorDefinition(Unknown Source)
    at com.thortech.xl.ejb.beansimpl.GCOperationsBean.lookup(Unknown Source)
    at com.thortech.xl.ejb.beans.GCOperationsSession.lookup(Unknown Source)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at org.jboss.invocation.Invocation.performCall(Invocation.java:359)
    at org.jboss.ejb.StatelessSessionContainer$ContainerInterceptor.invoke(StatelessSessionContainer.java:237)
    at org.jboss.resource.connectionmanager.CachedConnectionInterceptor.invoke(CachedConnectionInterceptor.java:158)
    at org.jboss.ejb.plugins.StatelessSessionInstanceInterceptor.invoke(StatelessSessionInstanceInterceptor.java:169)
    at org.jboss.ejb.plugins.CallValidationInterceptor.invoke(CallValidationInterceptor.java:63)
    at org.jboss.ejb.plugins.AbstractTxInterceptor.invokeNext(AbstractTxInterceptor.java:121)
    at org.jboss.ejb.plugins.TxInterceptorCMT.runWithTransactions(TxInterceptorCMT.java:350)
    at org.jboss.ejb.plugins.TxInterceptorCMT.invoke(TxInterceptorCMT.java:181)
    at org.jboss.ejb.plugins.SecurityInterceptor.invoke(SecurityInterceptor.java:168)
    at org.jboss.ejb.plugins.LogInterceptor.invoke(LogInterceptor.java:205)
    at org.jboss.ejb.plugins.ProxyFactoryFinderInterceptor.invoke(ProxyFactoryFinderInterceptor.java:138)
    at org.jboss.ejb.SessionContainer.internalInvoke(SessionContainer.java:648)
    at org.jboss.ejb.Container.invoke(Container.java:960)
    at sun.reflect.GeneratedMethodAccessor127.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at org.jboss.mx.interceptor.ReflectedDispatcher.invoke(ReflectedDispatcher.java:155)
    at org.jboss.mx.server.Invocation.dispatch(Invocation.java:94)
    at org.jboss.mx.server.Invocation.invoke(Invocation.java:86)
    at org.jboss.mx.server.AbstractMBeanInvoker.invoke(AbstractMBeanInvoker.java:264)
    at org.jboss.mx.server.MBeanServerImpl.invoke(MBeanServerImpl.java:659)
    at org.jboss.invocation.local.LocalInvoker$MBeanServerAction.invoke(LocalInvoker.java:169)
    at org.jboss.invocation.local.LocalInvoker.invoke(LocalInvoker.java:118)
    at org.jboss.invocation.InvokerInterceptor.invokeLocal(InvokerInterceptor.java:209)
    at org.jboss.invocation.InvokerInterceptor.invoke(InvokerInterceptor.java:195)
    at org.jboss.proxy.TransactionInterceptor.invoke(TransactionInterceptor.java:61)
    at org.jboss.proxy.SecurityInterceptor.invoke(SecurityInterceptor.java:70)
    at org.jboss.proxy.ejb.StatelessSessionInterceptor.invoke(StatelessSessionInterceptor.java:112)
    at org.jboss.proxy.ClientContainer.invoke(ClientContainer.java:100)
    at $Proxy373.lookup(Unknown Source)
    at Thor.API.Operations.GCOperationsClient.lookup(Unknown Source)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at Thor.API.Base.SecurityInvocationHandler$1.run(Unknown Source)
    at Thor.API.Security.LoginHandler.jbossLoginSession.runAs(Unknown Source)
    at Thor.API.Base.SecurityInvocationHandler.invoke(Unknown Source)
    at $Proxy814.lookup(Unknown Source)
    at com.thortech.xl.gc.runtime.GCAdapterLibrary.executeFunctionality(Unknown Source)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpDBPCAT_GTC.GENERICADAPTER(adpDBPCAT_GTC.java:125)
    at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpDBPCAT_GTC.implementation(adpDBPCAT_GTC.java:70)
    at com.thortech.xl.client.events.tcBaseEvent.run(Unknown Source)
    at com.thortech.xl.dataobj.tcDataObj.runEvent(Unknown Source)
    at com.thortech.xl.dataobj.tcScheduleItem.runMilestoneEvent(Unknown Source)
    at com.thortech.xl.dataobj.tcScheduleItem.eventPostUpdate(Unknown Source)
    at com.thortech.xl.dataobj.tcDataObj.update(Unknown Source)
    at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
    at com.thortech.xl.dataobj.tcScheduleItem.checkChildrenIfCompleted(Unknown Source)
    at com.thortech.xl.dataobj.tcScheduleItem.checkChildren(Unknown Source)
    at com.thortech.xl.dataobj.tcScheduleItem.eventPostUpdate(Unknown Source)
    at com.thortech.xl.dataobj.tcDataObj.update(Unknown Source)
    at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
    at com.thortech.xl.adapterfactory.events.tcAdpEvent.updateSchItem(Unknown Source)
    at com.thortech.xl.adapterfactory.events.tcAdpEvent.finalizeProcessAdapter(Unknown Source)
    at com.thortech.xl.adapterfactory.events.tcAdpEvent.finalizeAdapter(Unknown Source)
    at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpDBPCATPREPOPULATEADAPTER.implementation(adpDBPCATPREPOPULATEADAPTER.j
    ava:52)
    at com.thortech.xl.client.events.tcBaseEvent.run(Unknown Source)
    at com.thortech.xl.dataobj.tcDataObj.runEvent(Unknown Source)
    at com.thortech.xl.dataobj.tcScheduleItem.runMilestoneEvent(Unknown Source)
    at com.thortech.xl.dataobj.tcScheduleItem.eventPostInsert(Unknown Source)
    at com.thortech.xl.dataobj.tcDataObj.insert(Unknown Source)
    at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
    at com.thortech.xl.client.events.tcTriggerUserProcesses.insertMileStones(Unknown Source)
    at com.thortech.xl.client.events.tcTriggerUserProcesses.trigger(Unknown Source)
    at com.thortech.xl.client.events.tcUSRTriggerUserProcesses.implementation(Unknown Source)
    at com.thortech.xl.client.events.tcBaseEvent.run(Unknown Source)
    at com.thortech.xl.dataobj.tcDataObj.runEvent(Unknown Source)
    at com.thortech.xl.dataobj.tcDataObj.eventPostUpdate(Unknown Source)
    at com.thortech.xl.dataobj.tcUSR.eventPostUpdate(Unknown Source)
    at com.thortech.xl.dataobj.tcDataObj.update(Unknown Source)
    at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
    at com.thortech.xl.dataobj.tcTableDataObj.save(Unknown Source)
    at com.thortech.xl.dataobj.tcUSR.updateProfile(Unknown Source)
    at com.thortech.xl.dataobj.tcREQ.selfProfileEditUser(Unknown Source)
    at com.thortech.xl.dataobj.tcREQ.launchEntityDERActions(Unknown Source)
    at com.thortech.xl.dataobj.tcREQ.eventPostUpdate(Unknown Source)
    at com.thortech.xl.dataobj.tcDataObj.update(Unknown Source)
    at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
    at com.thortech.xl.dataobj.tcTableDataObj.save(Unknown Source)
    at com.thortech.xl.dataobj.tcREQ.checkRequestReceived(Unknown Source)
    at com.thortech.xl.dataobj.tcREQ.eventPostUpdate(Unknown Source)
    at com.thortech.xl.dataobj.tcDataObj.update(Unknown Source)
    at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
    at com.thortech.xl.dataobj.tcTableDataObj.save(Unknown Source)
    at com.thortech.xl.schedule.jms.requestapproval.InitRequestApproval.execute(Unknown Source)
    at com.thortech.xl.schedule.jms.requestapproval.InitRequestApproval.execute(Unknown Source)
    at com.thortech.xl.schedule.jms.messagehandler.MessageProcessUtil.processMessage(Unknown Source)
    at com.thortech.xl.schedule.jms.messagehandler.MessageHandlerMDB.onMessage(Unknown Source)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at org.jboss.invocation.Invocation.performCall(Invocation.java:359)
    at org.jboss.ejb.MessageDrivenContainer$ContainerInterceptor.invoke(MessageDrivenContainer.java:495)
    at org.jboss.resource.connectionmanager.CachedConnectionInterceptor.invoke(CachedConnectionInterceptor.java:158)
    at org.jboss.ejb.plugins.MessageDrivenInstanceInterceptor.invoke(MessageDrivenInstanceInterceptor.java:116)
    at org.jboss.ejb.plugins.CallValidationInterceptor.invoke(CallValidationInterceptor.java:63)
    at org.jboss.ejb.plugins.AbstractTxInterceptor.invokeNext(AbstractTxInterceptor.java:121)
    at org.jboss.ejb.plugins.TxInterceptorCMT.runWithTransactions(TxInterceptorCMT.java:350)
    at org.jboss.ejb.plugins.TxInterceptorCMT.invoke(TxInterceptorCMT.java:181)
    at org.jboss.ejb.plugins.RunAsSecurityInterceptor.invoke(RunAsSecurityInterceptor.java:109)
    at org.jboss.ejb.plugins.LogInterceptor.invoke(LogInterceptor.java:205)
    at org.jboss.ejb.plugins.ProxyFactoryFinderInterceptor.invoke(ProxyFactoryFinderInterceptor.java:138)
    at org.jboss.ejb.MessageDrivenContainer.internalInvoke(MessageDrivenContainer.java:402)
    at org.jboss.ejb.Container.invoke(Container.java:960)
    at org.jboss.ejb.plugins.jms.JMSContainerInvoker.invoke(JMSContainerInvoker.java:1092)
    at org.jboss.ejb.plugins.jms.JMSContainerInvoker$MessageListenerImpl.onMessage(JMSContainerInvoker.java:1392)
    at org.jboss.jms.asf.StdServerSession.onMessage(StdServerSession.java:266)
    at org.jboss.mq.SpyMessageConsumer.sessionConsumerProcessMessage(SpyMessageConsumer.java:906)
    at org.jboss.mq.SpyMessageConsumer.addMessage(SpyMessageConsumer.java:170)
    at org.jboss.mq.SpySession.run(SpySession.java:323)
    at org.jboss.jms.asf.StdServerSession.run(StdServerSession.java:194)
    at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:761)
    at java.lang.Thread.run(Thread.java:619)
    16:10:35,203 ERROR [APIS] An exception occurred while creating the GenericConenctor Model from the Connector Definition file
    ... 126 more
    16:11:17,421 ERROR [FRAMEWORKPROVISIONING] An exception occurred while generating Generic Connector model from the connector defin
    ition xml of the connector 'DBPCAT'
    The other usecase is - when xelsysadm logs into idm console and updates the attribute on the user form, it updates the process form and the target table column also.
    Please help me...
    Thanks & Regards
    Kunal Jain

    You need to give permission to update the process form to any users who would be the source of the change. So if joe schmoe is updating the user, they need permission to update the process form for any user they update.
    -Kevin

  • How to provide value to a User Defined field thru java code

    I am using OIM 11.1.1.5.
    I have a user defined field called Unique-Customer-Number. This field need to be pre-populated during user creation (using OIM Web UI) and the value comes from a java code.
    Can any of you tell me the high level steps to implement this.
    Thanks!
    Kabi

    Thanks Rajiv,
    I just followed everything on metalink 1262803.1. My console shows the followings during Metadata import.
    weblogicImportMetadata.bat :-
    Starting import metadata script ....
    Please enter your username :weblogic
    Please enter your password :
    Please enter your server URL [t3://localhost:7001] :t3://10.10.99.99:7001
    Connecting to t3://10.10.99.99:7001 with userid weblogic ...
    Successfully connected to Admin Server 'adm_server01' that belongs to domain 'server01'.
    Warning: An insecure protocol was used to connect to the server. To ensure on-the-wire security, the SSL port or Admin port should be used instead.
    Location changed to domainRuntime tree. This is a read-only tree with DomainMBean as the root.For more help, use help(domainRuntime)
    Disconnected from weblogic server: adm_eimsdv1s01
    End of importing metadata script ...
    Exiting WebLogic Scripting Tool.
    How I will I know that my plugin/ event-Handler is registered successfully. Is there any screen where I can see all registered plugins ?

  • Want to add a prepopulated User defined field in create user form

    Hi,
    I have an entity adapter which will perform a pre-insert check on the user group of the user logged in to the oim.
    If the logged in user belongs to a group say "IT ADMIN", another validation check will be imposed on the create user action performed by him.
    If not from "IT ADMIN" group then create user action will be handled normally.
    Now the catch is, how would I determine the group name of the user logged in from the adapter code I have written?
    I decided to keep an User defined field "Created by" in the create user form which will be non-editable and auto-prepopulated with the group name of the logged in user. This way I will be able to map the variable field from the User definition drop down list while mapping the adapter variables.
    May you please guide me how I can achieve this?
    Would highly appreciate suggestion/inputs.

    Thanks for all your replies!
    However I am still in dark.
    I tried to retrieve the groupname using tcUSerOperationsIntf. But iit tries to retrieve the group name of the user getting created.
    Please note, the group name I want is not of the user yet to get created, but that of the user creating it i.e., the logged in user.
    My requirement is to have this created_by field in the create user form already prepopulated with the group name of the logged in user.
    So that I can put a check based on this field value in the netity adapter.
    If the group is IT ADMIN then proceed with the validation.
    Else no validation required.
    In short, I want to know,how can I auto-prepopulate a UDF in Create USer form?

  • Not found Users Form in User Defined Field Definition!!

    I want to add new filed into Users form, As my subject, but when I query "Users" in User Defined Field Definition, no result return, just exist Orgnizations, Roles, Resource Objects,Structure Utility.
    FYI, OIM Version: oim 11g
    Thanks,
    Edited by: 793495 on 2010-10-11 上午2:53

    this you can find in Web console
    configuration>>user configuration>>action>>attributes
    I am able to add attribute but not able to make field as mandatory,while creating attribute we are not getting option like that you want this field mandatory or not but while modifying the attribute we are getting option like required field radio button if i select that i am getting error "you cant change an attribute to required unless all the user have value for this field"

  • User Defined Fields & AD Connector

    Hello All
    I am having a bit of trouble understanding the flow of information from Xellerate User to AD connector table/provisioning and was hoping someone could help me out. Basically, I have a set of user defined fields that I need to get provisioned to active directory. I have follow the AD connector documentation for adding the new fields to the resource form and process definition but I still do not see the new values for the data showing up in the UD_ADUser table to be provisioned to AD. Not sure if there is a pre-populate adapter I need to add to move the data from USR to UD_ADUSER or if there is some other data mapping that needs to be done, but any help or guidance (end to end) would be helpful.
    Thanks
    Nick

    Suren
    I did the adapter (pretty much copied the last name adapter) but when I update the values in the web console for the user defined fields, it is not updating the values in the UD_ADUSER table. I am also getting this value in the OIM log...do you know what could be causing this.
    2010-09-09 11:47:00,696 DEBUG [XELLERATE.ADAPTERS] Class/Method: tcAdpEvent/finalizeEntityAdapter entered.
    2010-09-09 11:47:00,696 DEBUG [XELLERATE.ADAPTERS] Class/Method: tcAdpEvent/finalizeEntityAdapter - Data: No Return Value mapping defined - Value:
    2010-09-09 11:47:00,696 DEBUG [XELLERATE.ADAPTERS] Class/Method: tcAdpEvent/finalizeEntityAdapter left.
    I reviewed the mapping in the form adapter properties and made sure there are variables mapped and made sure that the adapter has the proper variables mapped and still seems to be coming up.
    Any help you can give would be appreciated.
    Thanks
    Nick

  • Requirement related to User Defined Fields

    Hi All,
    I have a requirement wherein I want 5 UDF (User Defined Fields) to be displayed in Create User Form. However, In the View User Profile, I want to have a total of
    10 UDF to be displayed (5 more UDF in addition to UDF's used in Create User Form). The value of these 5 new UDF will come from some other resource ( a
    webservice will return the value of these new 5 UDF) and in the Update User Form, I want to have only 5 UDF to be displayed (same 5 UDF's that are used in
    Create User Form).
    So, need your inputs on whether this can be achieved through OOTB OIM Configuration or it will require Customization (OIM Api's or jsp customization)?
    Regards,
    Sunny Ajmera

    Hi,
    You want to say you have total 10UDFs; 5 you will show on the create user page while on user profile page you want to show all 10UDFs.
    Is it right???
    Then you have to go for jsp customization.
    But you can do one thing by ootb; show all the 10UDFs on the create user make 5 editable in which you want to give any value and make rest 5 as read only.
    You have two options choose what suit best to you.
    Regards
    Alabhya Goel

  • Error: property is not set correctly for User Defined Fields.

    Hi Gurus,
    I am trying to define a new field Department of type Lookup. For this i have created a new field in user defined fields. But when i click on create user in web console it give me "property is not set correctly for User Defined Fields."
    I created a lookup field for department , but looks like i have to some kind of mapping. How can it be done?
    Thanks,
    sat

    Hi Kevin,
    I couldnt get it done. This is what I had done so far.
    Created Lookup.Users.Dept ( with code code=23 & decode=treasury)
    Added two field in xlwebadmin.properties & xlwebadmin_en.properties
    lookupfield.header.users.deptcode=Department code
    lookupfield.header.users.deptname=Department name
    In my lookfield properties in
    column caption=Department code,Department name
    Column query= Not sure what to give? here
    Thanks,
    sat

  • Unique User-Defined Field

    Gurus,
    I have a User-Defined Field and I want the values in this field to be unique.
    Is there a way to set this up? I only found how to make the field required and visible, but didnt find anything about how to make it unique.
    Thnaks,
    Adriano.

    Martin,
    Thanks for answering but let me clarify one point.
    The value will be entered by the user, he will paste the value into this field and it is supposed to be unique. I would like to validate it.
    If the value already exist for another identity I stop the user from creating an identity on OIM.
    I wondered if i had a better choice then writing an adapter (java) to search for this value in the OIM.
    Please let me know if the adapter is my only choice for now.
    Thanks again,
    Adriano!

Maybe you are looking for