Ojpro 8000 wireless light keeps timing out

Hello, I have a new ojpro 8000 wireless printer (to replace my previous printer of the same model which died after warranty).
Working on an iMac using Airport Express as router. Printer is connected only wirelessly. Printer's IP address is 10.0.1.4. No MAC filtering or hidden SSID.
I can reach the 10.0.1.4 web page with no problem. The page does not indicate any problem. Printer works fine. But the wireless connection, or at least the blue light,  seems to go to sleep when there has been no activity. I can turn it on by pressing the wireless button. I can still access 10.0.1.4 even when the light is out!
This did not happen with my old printer, and the wireless configuration has not been changed.
**New observation... While typing this note the light was out. Then, on an impulse, I tried to print a document. It started printing and the blue light had come on by itself.**
So, given this last observation, I'm not sure if I even have a problem here, but the light used to not go off by itself in the past, so I am a little concerned.
Any advice?
Thanks, Bob
This question was solved.
View Solution.

As long as it prints and scans as you want it to, I say just ignore the blue light.  If you can't stand it, put a piece of black electrical tape over it.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Similar Messages

  • Home wireless network keeps "timing out." Help!

    I currently have an eMac with a wired connection to an AirPort Extreme base station that creates a wireless network in my home with Time Warner Road Runner. I also have an Airport Express that acts as a relay station.
    For some reason lately, the wireless internet connection is S-L-O-W and often I can't load a page and get the message "network connection timed out, server may be busy." The wireless signal is excellent and I've restarted both the Base Station as well as the Express but no luck. I use a G4 PowerBook and my wife uses an iBook and the problem occurs on both
    The wired connection works great.
    Can anyone help me figure out what's going on? Thanks for any help.
    Sunil
    PowerBook G4   Mac OS X (10.4.7)  

    I'm running into a simiar situation with Time Warner Road Runner. I have 3 PCs with a wired connection to a linksys router that creates a wireless network for my MacBook.
    For the first 4 days the wireless network worked great. I could access the internet from anywhere in the house on my MacBook. On the 5th day I couldn't connect to the internet on my MacBook. I've power cycled the cable modem and the router, updated the router firmware and even called Apple Care. No one has an answer. Like you, my wired connections work just fine. And the wireless signal is great. The MacBook can see the wireless network and get on it but cannot connect to the internet through it.
    I believe it may be a DHCP lease renewal issue for the IP address. The MacBook doesn't show an IP address in its Network Configurations for the router. My network locations keep resetting their port priorities to bluetooth instead of airport and everytime I do a diagnostic I get a message that says "another program has changed your network configurations, click ok to continue". But I don't have any answers.
    Maybe someone out there does?

  • Hi there can anyone help. I am connected to the internet by ethernet but my connection keeps timing out and my network diagnostics shows all green and network connection ok but still no internet connection. the other wireless laptop in my flat works well.

    Hi there can anyone help. I am connected to the Internet by Ethernet but my connection keeps timing out and my network diagnostics shows all green and network connection ok but still no Internet connection. the other wireless laptop in my flat works well. Could the other wireless laptops being used in my flat be affecting my connection. what can I do to get connected, keep connected. Thanks for any ideas out there.

    My network connected for a few hours then went back to timing out. I have not changed anything. However there four additional laptop users in my family who do not seem to be having any problems using their wireless connection. Could their film and music downloads be causing the timing out of my connection and if so is there a way I could prioritizes my computer or limit their use?

  • I can't connect to Wi-Fi - keeps timing out. No problem connecting from other laptops / phones. Stopped working after I did a system upgrade. What can I do?

    I can't connect to Wi-Fi - keeps timing out. No problem connecting from other laptops / phones. Stopped working after I did a system upgrade. What can I do? I am on OS X Yosemite.

    Take each of the following steps that you haven't already tried, until the problem is resolved. Some of these steps are only possible if you have control over the wireless router.
    Step 1
    Turn Wi-Fi off and back on.
    Step 2
    Restart the router and the computer. Many problems are solved that way.
    Step 3
    Change the name of the wireless network, if applicable, to eliminate any characters other than letters and digits. You do that on your router via its web page, if it's not an Apple device, or via AirPort Utility, if it is an Apple device.
    Step 4
    Run the Network Diagnostics assistant.
    Step 5
    In OS X 10.8.4 or later, run Wireless Diagnostics and fix the issues listed in the Summary, if any.
    Step 6
    Back up all data before proceeding.
    Launch the Keychain Access application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    Enter the name of your wireless network in the search box. You should have one or more "AirPort network password" items with that name. Make a note of the name and password, then delete all the items. Quit Keychain Access. Turn Wi-Fi off and then back on. Reconnect to the network.
    Step 7
    You may need to change other settings on the router. See the guidelines linked below:
    Recommended settings for Wi-Fi routers and access points
    Potential sources of interference
    Step 8
    Make a note of all your settings for Wi-Fi in the Network preference pane, then delete the connection from the connection list and recreate it with the same settings. You do this by clicking the plus-sign icon below the connection list, and selecting Wi-Fi as the interface in the sheet that opens. Select Join other network from the Network Name menu, then select your network. Enter the password when prompted and save it in the keychain.
    Step 9
    Reset the System Management Controller (SMC).

  • Can anyone help me!!! i have an i pod touch and the 4 digit passcode has been forgotten. i have tried a number of times to restore the factory settings on i tunes and have put the i pod into recovery mode, but attempts keep timing out

    my son has forgotten his 4 digit pass code for hios i pod touch. i have been instructed to disable it and connect to i tunes to restore factory settings. when I do this the download time is anything up to 20 hours and it keeps timing out. it is now saying that i tunes cannot connect to the i pod because it is locked with a passcode and saying that i must enter the passcode - can anyone help?

    - To get around the passcode issue, place the iPod in recovery mode. For how to see:
    iPhone and iPod touch: Unable to update or restore
    - If you are getting a network timeout error during the restore, disable the computer's security software during the restore.

  • Using Home Sharing to transfer itunes library from old computer to new but connection keeps timing out...anyone have a solution?

    Hello everyone,
    I am attempting to use Home Sharing to import my itunes library from my old computer to new (as per instructions on this site), but the connection keeps "timing out" and so the import gets cut short.
    Both computers have the new itunes (I updated them last night), but only seem to get about 5 minutes (or 100 songs in) before the connection error occurs.
    I have an external hard drive and would use it to transfer my library (which is ~45GB) however my old computer isn't recognizing the hard drive so I thought Home Sharing was a good option...perhaps I was wrong?
    Help Please!
    Thanks

    You might need to make sure neither is going to sleep (System Prefs > Energy Saver)
    Also check your settings under System Prefs > Security. My sisters new laptop kept logging off due to some setting there.
    HTH

  • I forgot my ipod password and when I try to restore and update thru itunes, it keeps timing out when the download is done

    I forgot the password to my ipod touch, when I try t restore and update thru itunes it keeps timing out at the end of the download?

    Try disabling your computer's security software.

  • Hey I have itunes 9.2.1 (4) and when I go to make a purchase it keeps timing out does anyone know how to fix this?

    I have itunes 9.2.1 (4) and when I go to make a purchase it keeps timing out does anyone know how to fix this?

    Hi Beege140,
    I have an article for you that will help you address this launch issue with iTunes:
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    http://support.apple.com/kb/TS1717
    Thanks for being a part of the Apple Support Communities!
    Cheers,
    Braden

  • I am on a Windows 7 OS attempting to reduce pdf size with my Adobe Acrobat Standard XI & Pro.  The application keeps timing out and  at the Subsetting embedded fonts portion and the application gives "Adobe Acrobat has stopped working" and then closes.  T

    I am on a Windows 7 OS attempting to reduce pdf size with my Adobe Acrobat Standard XI & Pro.  The application keeps timing out and  at the Subsetting embedded fonts portion and the application gives "Adobe Acrobat has stopped working" and then closes.  The document is 275 pages.  Is there something I can do to stop this?

    Hi Ricci,
    Since when are you facing this issue? Did you tried system restore to a date before this problem occured.
    Does acrobat stop working when you open this specific pdf file or with any pdf file that you open?
    Regards,
    Rahul

  • Downloading Itunes 5.0.1 keeps timing out. Repeatedly. Why?

    Trying to update itouch with 5.0.1 and it keeps timing out. pretty certain it is mot my end. Anyone else getting this and what it the solution?

    Try disabling the computer's security software (antivirus and firewall) during the download and update.

  • I loaded software updates to Settings now my lock button won't work. I was told to do a restore but it keeps timing out. I disabled virus software which didn't help. How do I get it to restore?

    I loaded software updates to Settings and now my lock button won't work. I was told to do a Restore but it keeps timing out. It says it will take 58 minutes to do the restore. I disabled my virus software but that didn't help. Any suggestions so I can do a Restore?

    Try the Manual Install discussed here:
    iDevice Troubleshooting 101 :: iPhone, iPad, iPod touch

  • Trying to edit my iTunes account, it keeps timing out prematurely why?

    Trying to edit info in my iTunes account it keep timing out prematurely why?

    If rhe apps and photos are that important you made sure that you took the steps in order to keep them safe in an event like this didn't you?
    You did backup the iPad before you decided to update the iPad correct?
    And you did transfer all of your apps and other purchases  into iTunes before you decided to update correct?
    If you did, just restore the iPad and then restore from the backup at the end of fhe process and follow that with a sync with iTunes and you will lose nothing,
    Now if you didn't do any of the precautionary steps ....

  • HT4623 I am having trouble with my iPod 5th gen after iOS update. It's in recovery mode and iTunes keeps timing out when I try to restore it. What should I do???

    I am having trouble with my iPod 5th gen after iOS update. It's in recovery mode and iTunes keeps timing out when I try to restore it. What should I do??? If possible, I would also like to keep all of my data.

    Maybe this will help:
    Troubleshooting
    As with all clickwheel iPods, you can reset this iPod by first toggling the hold switch on and off and then simultaneously pressing the select (center) and menu buttons for approximately 5-10 seconds. This is a common fix should your iPod behave unexpectedly or lock up. Once reset, the iPod should display an Apple logo for a few seconds before showing the main menu. This procedure is similar to rebooting a computer and damages none of your music or data.

  • HT1212 i am attempting to restore an i pad mini but computer keeps timing out of network connection how can i fix

    Im attempting to restore ipad mini but itunes site keeps timing out how do i fix

    If you are doing it via your computer's iTunes then try temporarily turning off all your firewall and antivirus software on your computer until the download/restore has completed.

  • HT201210 Ok so I'm trying to update my iPad, and it keeps "timing out." I got to the actual update process, and it failed and asked me to restore my iPad, but I just can't lose all of my apps and photos! Someone please help.

    Ok so I'm trying to update my iPad, and it keeps "timing out." I got to the actual update process, and it failed and asked me to restore my iPad, but I just can't lose all of my apps and photos! I payed for a lot of my apps, and my photos are just too important. Someone please help!

    If rhe apps and photos are that important you made sure that you took the steps in order to keep them safe in an event like this didn't you?
    You did backup the iPad before you decided to update the iPad correct?
    And you did transfer all of your apps and other purchases  into iTunes before you decided to update correct?
    If you did, just restore the iPad and then restore from the backup at the end of fhe process and follow that with a sync with iTunes and you will lose nothing,
    Now if you didn't do any of the precautionary steps ....

Maybe you are looking for