Ok, dual screen for AIT but anything for nVidia?

so there is screen spanning doctor for ATI eMacs. but i have a 700mhz emac (with nvidia graphics card), I run logic pro on it and want to have a 2 screen setup, has any one seen a fix for them so i can use dual screens? (as in proper dual screens, not mirroring).
any help?
Thanks, Olly.

The eMac's nVidia graphics card physically does not support spanning across multiple monitors.

Similar Messages

TS3274 Getting sound for music, but not for game apps. Checked settings and sound is on. Any suggestions.

My volume controls work and getting sound for music but not for game apps. I did check settings and sound is turned on under notifications and in the app. Any help would be appreciated

Have you got notifications muted ? Only notifications (including games) get muted, so the Music and Videos apps, and headphones, still get sound.
Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad above the volume switch, or via control centre : swipe up from the bottom edge of the screen and it's the right-most of the 5 icons in the middle of it (if the icon is white then it's 'on', tap it to turn it grey and 'off'). The function that isn't controlled via the side switch is controlled via control centre instead : http://support.apple.com/kb/HT4085

Table of Contents page numbers works for PDF but not for other formats

Hi,
I followed exactly was indicated here regarding creation of TOC.
http://docs.oracle.com/cd/E10415_01/doc/bi.1013/e12187/T421739T481157.htm
The page numbers generated correctly for PDF but not for RTF, HTML and XLS.
(HTML and XLS are understandably not paginated in nature but why not in RTF?)
Tried to make the simplest example work, with 2 headings each on a separate page. Doesn't work on either MSWord 2003 or 2007.
What am I doing wrong?
Regards,
Jarell
Edited by: Jarell on Jan 11, 2012 8:08 PM

Hi Kavipriya,
What is your email address? I have attached a file in Oracle Metalink, under SR 3-5172030861. named test_toc.rtf
You may use any xml because the template does not use any dynamic binding of values.
The template is basically 2 pages, the TOC in the 1st page. First TOC item (Heading 1) is in Page 1, and Second TOC item is in Page 2.
So the end result should be (PDF result from BI Publisher):
First TOC Item .................. 1
Second TOC Item ............. 2
But for RTF it outputs:
First TOC Item .................. 0
Second TOC Item ............. 0
And after doing Print Preview (once or twice)
First TOC Item .................. Error in Bookmark
Second TOC Item ............. Error in Bookmark
Hope this is detailed enough to illustrate the problem.
Edited by: Jarell on Jan 17, 2012 10:24 PM

How can I view the number of tunes in the Library? The number shows for Playlists but not for the total Library.

How can I view the number of tunes in the Library? The number shows for Playlists but not for the total Library.

Hello,
I apologize for submitting this question. Soon after I posted it I saw a similar question that had my answer..
Again, my bad for not looking first.
Ron Morris

Password works for login but not for the Adobe CC Desktop application

Password works for login but not for the Adobe CC Desktop application

Please refer to http://helpx.adobe.com/creative-cloud/kb/troubleshoot-cc-installation-download.html
ou can try deleting OPM.DB from steps below and try again.
Mac OS: You can locate the OPM.db file in the \User\\Library\Application Support\Adobe\OOBE folder. To access the hidden user Library folder, see Access hidden user library files | Mac OS 10.7 Lion. - http://helpx.adobe.com/x-productkb/global/access-hidden-user-library-f iles.html
Windows: You can locate the OPM.db file in the :\Users\\AppData\Local\Adobe\OOBE folder. To view the hidden AppData folder, see Show hidden files, folders, filename extensions | Windows XP, Vista, Windows 7. -http://helpx.adobe.com/x-productkb/global/show-hidden-files-folders-ex tensions.html
3) update to the latest version of the Creative Cloud app.
Also we would like few more details:
When has this issue started occurring, was this after installation of any specific adobe product.
On which platform are you seeing this.
Also we would like to know if after above steps this issue occurs ever again in future.
You can refer to http://forums.adobe.com/thread/1239510
Regards,
Rajshree

Motion tracking is not working for videos but works for images?

Motion tracking is not working for videos but works for images. When the videos is drop onto the tracking object the videos corner don't appear highlighted. I am working on windows 7 with version 13.1.

ivanhoeeurope
Are you within 30 days of purchase for the Premiere Elements 13? And, did you purchase as a download from Adobe? If so, you can
apply for a return/refund for 13. If you purchased elsewhere, then you would be governed by the return/refund policy of the seller.
Adobe no longer sells version 12, so you would have to find a vendor who still has it in stock and purchase it. There is no way to "downgrade"
13 to 12.
What you may want to do is to download and install the Premiere Elements 12 tryout from the following web site to verify that 12 Motion
Tracking works for you; whereas 13 cannot with regard to use of video for the Motion Tracking source media.
Adobe Photoshop Elements 12 Direct Download Adobe Photoshop Elements 12 Direct Download Links, Premiere too | ProDesignTools
Apparently this web site does not sell the tryout. It just makes it available for use.
Before I posted my reply to you I looked at Motion Tracking with video source media on both Premiere Elements 12/12.1 and 13/13.1 on the same Windows 7 64 bit computer.
If any questions or need clarification, please do not hesitate to ask.
Thank you.
ATR

Print Screen not working for user but working for Administrator

Satellite A100 Laptop Print Screen Not working for USER but is working for Administrator[ New ]
09-14-2009 11:25 AM
Hi I am new to this forum and am asking for your help. We are sharing a computer, the PrtSc key is working for the Administrator but not when we switch users. We have tried everything that we can think of: From opening a the page(S) we want to paste to not opening the pages. My most common usage is to PrtSc and paste it into an email , but barring that we have tried opening a page in notes, documents, word etc . Nothing seems to work. I do not get an error message , it just won't paste. Since we are not computer literate we are hoping you can help us with a solution . Thanks in Advance .

Jerry, that post you just answered was from nearly 4 1/2 years ago! And that's the last time the OP was here.
C.B.
Toshiba Sat. C75D-B7260 Win 8.1 64 Bit--Toshiba Sat. L775D-S7132 Win 7 HP SP1 64 Bit and Win 10 PRO Technical Preview--Toshiba Sat. L305-S5921 Win Vista SP2 32 Bit

Why is visual voicemail free for iPhone but not for other phones?

I recently activated an iPhone on my line -- temporarily -- and found that visual voicemail was included and didn't cost a dime. Can anyone explain why visual voicemail is free for iPhones but if you want it for any other phone it bears a monthly charge?

Also VVM is also free for everyone. The $2.99 is for the premium version. You can search the FAQ and there's a pricing list and shows what you get.

Sound for phone but vibrate for text

Hi. I would like to set my iPhone up so that it will make a sound for calls, but only vibrate for text. This is very important to me because I am on call for my job. Thus I would like to be awakened if called, but not for receiving an SMS.
A similarly useful feature would be to be able to use a different volume ringtone for text than for call (that way I could just set up a very quiet rintone for text).
Any help would be appreciated. Thanks.

The volume for ringtones for the phone and txt are set with the volume rocker on the outside of the phone. That is the same no matter what. Once solution would be to create a ringtone and reduce the volume of it when you create it. Another solution that I have seen mentioned here for a similar situation was to set the SMS tone to None. That should then allow it just to vibrate if you have vibrate turned on.

Block G/L Account for posting but not for parking

Hi all,
is there a possibility to customize a G/L account in a way that it is blocked for posting but not blocked for parking?
Kind regards,
Georg

Hi Georg-Stefan,
Directly, you cannot define such a thing. G/L blocking works on every posting level.
You can try, though, to pull a trick with a validation (OB28) checking on the BKPF-BSTAT field if it's not V - then block the posting. The prerequisites will be the G/L accounts, which can be organized in sets for better maintenance.
Regards,
Eli

ISync works for iCal but not for Address Book

Another lost soul. Can anybody suggest where I should start looking for the problem.
I've just successfully modified my iSync so that it sees my brand new Nokia 6300. I have got the phone and my iMac to sync my calendar, but absolutely zero activity on the contacts front.
Looking at the message on my Nokia, the Synchronisation Info message records changes to the Calendar but makes no mention of the Contacts. It is as if I've switched off the requirement to sync these somewhere.
Any ideas for where to look?
Frances

I followed the instructions on http://kaspers.freeflux.net/blog/archive/2007/04/13/how-to-isync-a-nokia-6300.ht ml , including simply replacing my MetaClasses.plist with his. The site blog shows this worked for lots of people, but not for me
Over the years I have found these Apple Discussion lists a very useful source of help, but I don't think I have ever come across a list with so many frantic pleas for help as this! ISync is a wonderful Idea, but it seems that it is far from plain sailing to implement.

Router works for desktop, but not for surrounding laptops.

The router I have is the Linksys E1000. I bought it and hooked it up yesterday and works great for my desktop but not for my daughters laptop. Her laptop has wireless automatic internet recognitions which allows her to pick up surrounding internet networks. We cannot figure out how to make this work. Please help!

Are you able to see your router's network name on your laptop? If yes, then follow the below mentioned settings.
Click Start >> Control Panel >> Network and Sharing Center >> Manage Wireless Networks, here remove all the networks present and close the Window...
Click on Connect to a Network and try to re-connect to your Network, it should ask for your Network Key/Password, enter the correct password/network key and click Connect...
It should connect...Once you are connected you should restart the computer, it should connect to Internet...

Express works for mac but not for pc's

my airport express works for my mac and iphone, but it won't work with my wife's and friends' pc's. the password works for me, but when they attempt to enter the password their computers ask for a network key instead of the password. please help!

I had successfully set up my Powerbook and PC to use Airport Express on a closed network. Been working fine for 5 weeks until tonight when neither machine could find the network. I reconnected the Mac but I can't get the PC hooked up again. Any ideas?
Charles

Linked server works for sa but not for user

I have a linked server to an Oracle database. It works fine for me logged in as DBA but not for the user. The linked server uses the same account regardless of who's using it.
When the user tries it the following error is thrown:
Cannot initialize the data source object of OLE DB provider "OraOLEDB.Oracle" for linked server
I have granted public access to MSDB and execute on the xp_prop_oledb_provider object to the user.

this link should give all the connection string to sql server
http://www.connectionstrings.com/sql-server/
but can you verify if your application is really using that connection file ? try running trace alongside and try to connect to the database.. so do you atleast see a call from this config file with username - myapplication??
Hope it Helps!!

Lion has killed my built-in mic for Facetime, but not for Quicktime recording or Skype.

After updating to Lion the built-in mic on my imac doesn't work properly, the person on the other end hears me very faintly. I can't turn it up anywhere. It works fine in Skype, and System Prefs levels are healthy when Facetime isn't running.
Please help solve this, it's very frustrating.

So...the Muted-Mic issue continued to happen. I also had a variation of it, where, the person on the other end of the call heard static/crackling noise.
The static noise issue (just like the muted-mic) went away as son as I plug in the head set on my iPhone 3g...Using the head-set the other end can hear me with out problems.
The likely culprit is the built-in mic. ( of-course it could be something else, but the mic is the most likely thing...it could be loose or something).
....So I take it in to the Apple Store (Genious Bar) Twice.
On my first visit they did not exchange it...Since the issue did not occur during a 1min test call he did...he asked me to take my phone back and see if it happens again.
...of course the issue happened again.
On my second visit, the Genious suggested that there might be a problem with the SIM.
...I was TOTLLY APPALLED by this response.... Read my original post on my problem, and you can probably infer that the SIM is a very unlikely source of the problem (...also, I'm an Cell Phone engineer for a large company for 8.5 years...so I know a thing or two about how cell phones work).
I did not tell the genious I'm a Engineer ...Maybe I should've.
After trying to explain to the genious that his suggestion of changing the SIM was not a likely solution he finally agreed to exchange my phone...The phone is under warranty if they want to debug the phone swapping SIMs etc...they should do this on their own time...not mine!!!
(he changed the phone and the SIM!!).
So if you see this issue, hope you can get service without having to go back several times, and getting the run around before they exchange a defective unit.

Ok, dual screen for AIT but anything for nVidia?

Similar Messages

Maybe you are looking for